Answer:
Virtually all non-tasters (dd) cannot taste PTC, while homozygous tasters (TT) occasionally report an inability or weak ability to taste the chemical. The heterozygous genotype (Tt) has the "leakiest" phenotype as reduced or absent tasting ability is relatively common. This is formally called a heterozygous effect.
Explanation:
The genotype for people who cannot taste PTC is 'tt', meaning they have two recessive alleles for the TAS2R38 gene. This genetic makeup results in a lack of sensitivity to the bitter chemical PTC, distinguishing 'non-tasters' from 'tasters' and 'supertasters' who may possess at least one 'T' allele.
The genotype for people who cannot taste PTC is 'tt'. This means they have two copies of the recessive allele. PTC, or phenylthiocarbamide, taste sensitivity is an inherited trait determined by the presence of a specific gene, TAS2R38. Individuals who can taste PTC may have the genotypes 'TT' (homozygous dominant) or 'Tt' (heterozygous) whereas only the 'tt' genotype leads to an inability to taste PTC. The TAS2R38 gene contains single nucleotide polymorphisms (SNPs) that influence the structure of a taste receptor protein on the tongue, affecting the ability to detect the bitter taste of PTC.
Supertasters have an enhanced sense of taste, often because of a higher number of taste buds or sensitivity to certain compounds, and may have a genotype leading to a heightened response to PTC and similar compounds. The genetic variation in the TAS2R38 gene is a prime example of how taste preferences and sensitivities can be affected by our genetic makeup.
help asap
It's a good idea to use website sources that end in .edu, .net,and .org when searching for reliable information
Question 1 options:
True
False
Answer:
a reliable source
Explanation:
Identify the ways in which a rooftop garden can reduce the heat absorbed, compared to an asphalt roof. Select the three correct answers.(2 points)
The surface is rougher and more varied than the asphalt.
The soil is heavier than the asphalt.
The paler color reflects more light.
Plants release water vapor.
Unlike asphalt, soil is not black.
Soil holds water that would have run off the roof.
Answer:
plants release water vapor
unlike asphalt, soil is not black.
The paler color reflects more light.
Explanation:
Answer:
The paler color reflects more light. Plants release water vapor.Soil holds water that would have run off the roof.Explanation:
A rooftop garden has the ability to reduce heat by up to 7ºC, in addition to promoting a beautiful and pleasant look.
First, a rooftop garden has plants that, in addition to releasing water vapor into the atmosphere, refreshing the environment, have the ability to increase the humidity of the place. The presence of soil also promotes the reduction of temperature, this is because the organic material contained in the soil and the roots of the plants allows the water that would run off the roof to be trapped in the soil, promoting a refreshment to the place. Finally, a rooftop garden usually has light colors, these colors reflect a lot of solar energy and absorb little solar energy, limiting high temperatures.
Heterotrophs obtain chemical energy from ______________.
Answer:
Heterotrophs obtain chemical energy for their survival by eating plants and animals.
Explanation:
The chemical energy that organism need comes from food. They break this food down to obtain energy.Depending on their source of nutrients , they are classified into: Autotrophs and Heterotrophs.Autotrophs use sunlight and photosynthesize to produce their own food. They are often known as producers.Heterotrophs are beings that can't prepare their own food and consume other organisms to obtain energy.They are also called consumers.Examples include: Animals, fungi,etc.Heterotrophs obtain chemical energy from consuming organic molecules, primarily glucose, derived from autotrophs or other heterotrophs, then metabolizing them through cellular respiration to produce ATP.
Heterotrophs obtain chemical energy from organic molecules produced by autotrophs or other heterotrophs. Unlike autotrophs, which can produce their own organic compounds through processes like photosynthesis, heterotrophs rely on consuming organic matter for energy.
The primary source of chemical energy for heterotrophs is typically in the form of glucose, a simple sugar. Glucose is obtained through the consumption of plants, animals, fungi, or bacteria, which serve as food sources. Once ingested, the organic molecules in these food sources are broken down through processes like digestion into simpler compounds such as glucose, which can then be further metabolized to release energy.
Heterotrophs undergo cellular respiration to extract energy from glucose. In cellular respiration, glucose is oxidized in a series of enzymatic reactions, ultimately producing ATP (adenosine triphosphate), the molecule that serves as the primary energy currency in cells.
ATP can then be utilized by the cell to perform various cellular processes, including growth, repair, and movement. Thus, heterotrophs rely on the consumption and breakdown of organic molecules to sustain their energy needs and maintain cellular functions.
Folds are usually formed by _____.
1. subduction
2.divergence
3.convection
4.compression
5.inertia
please help soon!
Answer:
Folds are usually formed by Compression
Explanation:
Compression has to do with applying force to a material or substance to give another shape, in order to get a fold compression is used.
Describe specialization in animal cells
Answer:
Explanation:
Process by which common cells is converted to specific cells inorder to perform specific functions
When does glycolysis occur
Answer:
In the cytoplasm outside the mitochondria.
what is the important of planting tree
Answer:
Importance of planting trees. Plantations of trees is important as they improve the life and fulfil essential needs of mankind. During photosynthesis, the treesbreakdown food materials and consume carbon dioxide. ... Trees cleanse the climate by absorbing carbon dioxide from the environment and releasing oxygen.
The accumulation of mutations can drive the aging process .
Yes accumulation of mutation can drive aging process.
Explanation:
The molecular damage that occurs in cells and tissues for a long time due to DNA damage and epigenetic changes gets accumulated in the cell.
This leads to lowering of the homeostasis in the cell during stress conditions and eventually risks of life-threatening diseases as cancers or neurodegenerative disorders develop.
Due to mutation in the gene DNA repair mechanism also gets affected this also contributes to the ageing of cells.
The telomere of the chromosome is shortened after every mitotic division but telomerase enzyme keeps adding the DNA sequence preventing shortening aging and death of the cell. If the mutation occurs in this enzyme it will increase the ageing of cells at high rate.
Dynamic changes that take place through interactions of the geosphere, atmosphere,
hydrosphere and biosphere, can be better understood, modeled and predicted through
the use of
Answer:
Dynamic changes that take place through interactions of the geosphere, atmosphere, hydrosphere and biosphere, can be better understood, modeled and predicted through the use of feedback loops.
Explanation:
Feedback loops help us to determine how dynamic changes take place in one layer of the earth and how this change influences a change in the other layer of the earth.
For example, a feedback loop will help us to illustrate that when the temperature in the atmosphere rises, the glaciers in the biosphere melt. This causes the temperature in the geosphere to increase. Also, this will cause the water in the hydrosphere to be heated.
"The dynamic changes that take place through interactions of the geosphere, atmosphere, hydrosphere, and biosphere can be better understood, modeled, and predicted through the use of interdisciplinary approaches and advanced technologies. These include:
1. Remote Sensing: Satellites and aerial sensors collect data on the Earth's surface and atmosphere, providing real-time information on weather patterns, ocean currents, vegetation cover, and geological formations.
2. Geographic Information Systems (GIS): GIS technology allows for the integration and analysis of various types of data related to geographic locations. This can include topography, climate data, vegetation maps, and more, enabling the visualization of complex interactions between different spheres.
3. Global Positioning Systems (GPS): GPS provides precise location data which is crucial for tracking changes in the Earth's surface, such as plate tectonics, land subsidence, or glacial movement.
4. Numerical Modeling and Simulation: Computer models simulate the Earth's systems and their interactions, allowing scientists to test hypotheses and predict future changes under different scenarios, such as increased greenhouse gas emissions.
5. Data Assimilation: This technique involves integrating observational data with model predictions to improve the accuracy of forecasts and simulations.
6. Citizen Science: Engaging the public in data collection can greatly expand the spatial and temporal coverage of environmental monitoring efforts.
7. Biogeochemical Models: These models help in understanding the cycling of nutrients and chemicals through the Earth's systems, including the carbon and nitrogen cycles.
8. Climate Models: These are sophisticated tools that simulate the Earth's climate system and are used to understand past climate changes and predict future climate scenarios.
9. Ecosystem Models: These models are designed to simulate the dynamics of ecosystems, including the interactions between different species and their environment.
10. Hydrological Models: These models simulate the water cycle and can predict the impacts of changes in precipitation, evaporation, and human water usage on water resources.
By leveraging these technologies and approaches, scientists can gain a more comprehensive understanding of the Earth as an integrated system. This holistic view is essential for addressing complex environmental issues such as climate change, natural resource management, and disaster risk reduction."
The image shows a map of Easter Island, located in the Pacific Ocean. Which major feature is missing from the map?
Answer:D
Explanation:
Answer:
the answer is D.compass rose
Explanation:
Which process is most likely used to transport glucose into a muscle cell?
Answer:
Glucose Transport
Explanation:
Glucose Transport is a highly regulated process accomplished mostly by facilitated diffusion using carrier proteins to cross cell membranes.
Hope this helped! if so, please mark as brainliest!
The most likely process for the uptake of glucose into muscle cells is facilitated diffusion using GLUT4 proteins in response to insulin, with subsequent phosphorylation by hexokinase to maintain a concentration gradient.
The process most likely used to transport glucose into a muscle cell is facilitated diffusion via glucose transport proteins, specifically GLUT4 proteins. When insulin is present in the bloodstream, it triggers the movement of GLUT4 transporters stored in vesicles to the cell surface. This allows glucose to enter muscle and adipose cells more readily. Additionally, to maintain a concentration gradient and facilitate continual glucose entry into the cells, glucose is converted to glucose-6-phosphate by an enzyme called hexokinase inside the muscle cells.
Therefore, the muscle cells utilize an insulin-regulated mechanism involving GLUT4 to efficiently uptake glucose, which is then promptly metabolized to prevent any build-up of glucose within the cell, maintaining a steady influx from the circulating blood.
A __________ is an organic molecule that consists of C, H, O atoms in a ratio of 1:2:1.
Answer:
Molecule
Explanation:
Molecule 34
A carbohydrate is an organic molecule consisting of C, H, and O atoms in a 1:2:1 ratio, important for human biochemistry and found in various forms from simple sugars to complex polysaccharides.
Explanation:An organic molecule that consists of carbon (C), hydrogen (H), and oxygen (O) atoms in a 1:2:1 ratio is known as a carbohydrate. Carbohydrates are essential biomolecules that come in various forms, such as sugars, starches, and fibers.
They have a general stoichiometric formula of (CH₂O)ₙ, where 'n' represents the number of carbon atoms in the molecule.
These organic compounds are a significant part of human biochemistry, consisting of carbon and hydrogen, and are essential for our diet and bodily functions.
Simple carbohydrates include monosaccharides like glucose and fructose, while complex carbohydrates include polysaccharides such as starch and cellulose.
The carbon skeleton of a carbohydrate provides a backbone to which other functional groups are bound, making them versatile in structure and function within living organisms.
Learn more about Carbohydrate here:https://brainly.com/question/33874241
#SPJ2
Question 4 (2 points)
Choose the true answer(s) from the choices below that best describe magnetic force.
Question 4 options:
A)
Magnetic force is generated by moving electrical charges or aligned atoms.
B)
Magnetic force is a contact force that can hold objects together.
C)
Magnetic force is a contact force that can act at a distance.
D)
Magnetic force can act at a distance to attract objects to each other.
Magnetic force is generated by moving electrical charge.
Magnetic force can act at a distance to attract objects to each other.
Explanation:
Magnetic force is a non-contact force that is generated by motion of charged particles or alligned atoms.
The objects that generate the Magnetic force are called magnets.
The region around the magnets where the effect of magnetic force is felt is called the magnetic field of the magnet.
Magnetic force can be attractive or repulsive.
When like poles come together the magnectic force between them behaves as a repulsive force.
When unlike poles are brought together the magnetic force between them is attractive force.
When uncharged magnetic material is brought near a magnet the magnetic force behaves as an attractive force.
Question 27 of 30
1 Point
What factors affect the temperature of seawater?
O
A. Depth and geographic area only
O
O
B. Depth, geographic area, and currents
C. Depth only
O
D. Geographic area only
SUBMIT
Factors that affect the temperature of seawater include depth, geographic area, and currents.
Explanation:The temperature of seawater is affected by multiple factors including depth, geographic area, and currents. The depth of the water can influence the amount of sunlight reaching the water and thus impact the temperature. Different geographic areas can have different climate patterns that affect seawater temperature. Additionally, ocean currents can transport warmer or colder water, further influencing the temperature.
Final answer:
Seawater temperature is determined by a combination of depth, geographic area, and ocean currents. Sunlight penetration, latitude, and heat distribution via currents are the primary factors, while solar radiation and geographical features also play significant roles.
Explanation:
The factors affecting the temperature of seawater are largely influenced by depth, geographic area, and ocean currents. The depth affects the temperature because sunlight penetration decreases with depth, leading to colder temperatures the deeper one goes. The geographic area is significant because water temperatures vary with latitude; waters are generally warmer near the equator and cooler near the poles. Furthermore, ocean currents play a crucial role in distributing heat across the globe. Warm currents can elevate temperatures in regions that would otherwise be cooler, while cold currents can have a cooling effect in areas that might be warmer without this influence.
Additional factors include solar radiation, which directly warms bodies of water, and geographical features such as wind systems, position on a continent, and mountain barriers, which can influence local climate conditions. These aspects also relate to the distribution of climate regions, with each facet contributing to the unique temperature profile of a given body of water.
The primary wavelengths of radiation emitted by Earth’s surface
Answer:
The correct answer is longer than those emitted by the sun.
Explanation:
Hope this help
plz mark brainliest
Have a nice day!!!
How do photosynthesis and cellular respiration interact to cycle matter through an ecosystem
Explanation:
Photosynthesis captures carbon dioxide from the atmosphere and converts it to biomass. This is why forests are referred to as great carbon sinks because they remove carbon dioxide from the atmosphere and incorporate it in the biosphere.
Cellular respiration, on the other hand, converts the carbon captured in the biosphere into carbon dioxide that is released into the atmosphere. Cellular respiration usually 'burns' glucose into carbon dioxide.
These two processes work antagonistically and cycle carbon matter through the biosphere and atmosphere.
Learn More:
For more on carbon cycle check out;
https://brainly.com/question/14353467
https://brainly.com/question/14157571
#LearnWithBrainly
What impact did industrialization have on imperialism? a) an increase in production led to the need for new land to build factories in foregone territories c) increased production led to a surplus in manufactured goods and in a need for more customers d) competing european countries believed that conquering other territories would provide them with no more citizens to tax
Answer:
The correct option is C) increased production led to a surplus in manufactured goods and in a need for more customers
Explanation:
Imperialism can be described as a word which is used when an industrialized nation takes over a non-industrialized nation.
The major reason for imperialism to occur is because industrialized countries need more people who will buy their products so that the economy can be raised. Imperialism also occurs for the need of materials from a different place. The powerful industrialized nation dominated the political, cultural, and economic affairs of the non-industrialized nations they conquered.
What ecological conditions caused the similarities in the body plan of these animals?
Answer:
i don't really know the condition but I think as animals Begin to migrate from one place to the other either by wind flooding and others the tend to adapt to the new environment where by somy features in them changes in other to adapt to the new area
The different species of dinosaurs have evolved through time due to changes in the climatic conditions. And, two species which have evolved from same ancestor show more similarity than two individuals which have evolved from different ancestors.
What is Evolution?Evolution can be defined as the change in heritable characteristics of different populations over the period of successive generations.
The available evidence show that severe changes in the environmental conditions such as the intense volcanic eruptions and rapid climate change supported evolution of the species.
Homologous structures which have evolved from the same ancestor but these structures show certain level of difference due to changes in the habitats. These organisms which evolved from same ancestor show more similarity than the organisms which evolve from different ancestors.
Learn more about Evolution here:
https://brainly.com/question/13492988
#SPJ2
an organisms ability to maintain a stable internal environment in the midst of external environment change is known as
Answer:
an organisms ability to maintain a stable internal environment in the midst of external environment change is known as HOMEOSTASIS
Explanation:
Homeostasis entails regulation of body temperature when there is a need in ambient temperature or internal temperature. Organisms tends to regulate this for survival because every living organism has it required temperature for survival be it internally or externally
An organism's ability to maintain a stable internal environment despite changing external conditions is called homeostasis. This is a crucial aspect of biology because it allows organisms to regulate important functions, helping them survive in a variety of environmental conditions.
Explanation:An organism's ability to maintain a stable internal environment in the face of changing external conditions is referred to as homeostasis. This is a central principle of biology, as it is essential for the survival and functioning of all living things. Homeostasis works through a series of feedback mechanisms that help control and regulate various body systems. Examples include temperature regulation, blood pH balance, and water and electrolyte balance. Without homeostasis, organisms would not be able to adapt to changing environmental conditions and could suffer severe health issues.
Learn more about Homeostasis here:https://brainly.com/question/31789146
#SPJ6
The most common compound on earth is:
water
nitrogen
phosphorus
oxygen
Answer:
Water
Explanation:
A compound means a substance (something) that is made of 2 or more elements.
Elements are the substances found on the periodic table. If you can find something on the periodic table, it cannot be a compound.
Nitrogen is "N" (7th square).
Phosphorus is "P" (15th square).
Oxygen is "O" (8th square).
The compound "water" is H₂O. It uses the elements "H" (hydrogen) and "O" (oxygen).
Since water is the only compound in those choices, the answer has to be water.
Other facts!
The Earth's surface has mostly water. About two-thirds (2/3) of Earth's surface is water.
The Earth's atmosphere is mostly Nitrogen (78%).
We breathe oxygen (which is O₂).
Answer: water
Explanation: A compound is a substance which contains more than one element chemically combined together in a fixed proportion. Nitrogen (N), phosphorus (P) and oxygen (O) are elements while water is a compound. Water has a chemical formula of H2O, containing two elements hydrogen and oxygen.
Question 2 (4 points)
Match the appropriate statement with the corresponding term.
Question 2 options:
The metric system unit for mass
An instrument used to measure the mass of an object
An instrument used to measure the weight of an object
The metric system unit for the weight of an object
1.
Scale
2.
Kilogram
3.
Balance
4.
Newton
Which process in plant physiology could not occur if the opening of the undersides leaves are closed?
A)photosynthesis
B)phototropism
C)reproduction
D)respiration
A) Photosynthesis will stop if the openings on the underside of the leaves are closed.
Explanation:
Photosynthesis produces sugars (glucose) by using carbon dioxide and water in presence of sunlight and chlorophyll. And oxygen is produced as a bye product of photosynthesis.
For the process of photosynthesis to take place continuously, it is very necessary that a continuous supply of Carbon dioxide and water is maintained into the cell.
Carbon dioxide enters the cell by the process of diffusion. The gases diffuse in and out of the plant tissue through the small openings on the surface of the leaves. These openings are called stomata.
If stomata remain closed then the diffusion of gases will cease . As a result photosynthesis will stop due to lack of raw material. Soon the plant will use up the reserve food and starve to death.
Which of the following is NOT a characteristic of
plants?
a. eukaryotic
b. cell walls contain chitin
c. multicellular
d. contain chlorophyll
Answer: b. cell walls contain chitin
Explanation:
Plant cell wall is made up of cellulose. Plants have cellulose cell wall. Plants are eukaryotes, multicellular and have chlorophyll. Eukaryotic cells have membrane bound organelles such as the nucleus, mitochondria, golgi apparatus, and Chloroplast. Therefore plants are eukaryotes because they contain membrane bound organelles. Multicellular organism are organism with many cells thus plants are multicellular because a single plant is composed of many cells. Plants have chlorophyll which is found in the Chloroplast. Chlorophyll is used by plants to trap sunlight needed for photosynthesis.
Cell walls contain chitin is NOT a characteristic of plants. Option B
The characteristics of plantsChitin is a structural polymer that makes up the cell walls of fungi and the exoskeleton of arthropods like insects and crustaceans. It does not, however, make up the cell walls of plants.
Cellulose makes up the majority of the cell walls in plants, giving them stiffness and stability. A complex carbohydrate called cellulose provides the foundation for the cell walls of plants. All the other things are contained by plants
Learn more about characteristics of plants:https://brainly.com/question/11968547
#SPJ6
What is an example of the effect of environmental factors on cell differentiation?
Answer:
Environmental factors can alter gene expression, cell signalling and cell differentiation.
Explanation:
Environmental factors can change, stop or disrupt the process of cell signalling and gene expression in organisms. The environmental factors are drugs, chemicals, temperature, etc. With the effect of environmental factors, the organism will try to adapt to the environment by changing the internal process. In case of adaptation, some organism may survive to the changing environment but there is a risk of exhibiting defects and in some case, the result can be death.Final answer:
Environmental factors can impact cell differentiation during fetal development, leading to different gene expression patterns and cell types in the body.
Explanation:
Environmental factors can have significant effects on cell differentiation. For example, during fetal development, if a mother faces famine or infections, the fetus will receive different environmental signals compared to a fetus that receives appropriate nutrition and avoids infections. These environmental signals can lead to different gene expression patterns and ultimately result in different cell types and structures in the body.
Some snakes have special sensory organs that detect the infrared region of the electromagnetic spectrum. Compared with human vision, these snakes can sense electromagnetic waves that have
These snakes can sense electromagnetic waves that have A lower frequency and a longer wavelength
Explanation:
In the electromagnetic spectrum, infrared waves have a lower frequency and higher wavelength than visible light. They proceed visible light on the spectrum.
Ultraviolet waves, on the other hand, have higher frequency and smaller wavelength and precede visible light on the spectrum order.
Answer:
C
Explanation:
Some species of present day protists contain living organisms within their cytoplasm. Paramecium bursaria are hosts for zoochlorellae, photosynthetic protists, that live within the cytoplasm of the paramecium. The relationship appears to be symbiotic; the zoochlorellae gain protection and possibly some essential nutrients from the host cytoplasm and the paramecium host has an available food source when its usual food source is depleted.
This symbiotic relationship provides support for the theory of endosymbiosis, which states that
A) animal-like cells evolved from ancestors that were photosynthetic.
B) mitochondria and chloroplasts evolved from small prokaryotes living within larger cells.
C) photosynthetic organisms, like today's land plants, evolved from photosynthetic bacteria.
D) heterotrophic organisms could not have evolved before the evolution of photosynthetic organisms.
Option B: Mitochondria and chloroplasts evolved from small prokaryotes living within larger cells support the theory of endosymbiosis.
Explanation:
Endosymbiotic theory is based on the theory that eukaryotic cell organelles like mitochondria and plastids like chloroplasts were originally structured as independent free-living prokaryotic cells.
This theory stated that prokaryotic cells were either producing energy through aerobic respiration, or can undergo photosynthesis, or cannot undergo respiration or photosynthesis but just engulf other cells.
These free-living cells ended up staying in host cells through endosymbiosis.
Endosymbiosis is a mutual relationship which is beneficial to both the host and the associated organism.
For example, the relationship between termite and the microbes present in its gut is an endosymbiotic relationship.
Answer:
B. Mitochondria and chloroplasts evolved from small prokaryotes living within larger cells
Explanation:
A wave with a height of 5 feet and a wavelength of 15 feet has a wave base of___.
A. 7.5 Feet
B. 6 Feet
C. 12 Feet
D. 3 Feet
A wave with a height of 5 feet and a wavelength of 15 feet has a wave base of 7.5 feet.
A. 7.5 feet
Explanation:
Wave base defines the depth of the water when it is in still condition.
Wave base is half of wavelength.
Wave base = wavelength/2
Given,
Wavelength = 15 feet
So, wave base = 15 feet/2 = 7.5 feet
When the wave height is divided by wavelength then it gives the steepness of the wave.
Therefore, the wave base is 7.5feet.
conditions affecting the earth's weather
Answer:
the four main ones are solar radiation, the amount of which changes with Earth's tilt, orbital distance from the sun and latitude, temperature, air pressure and the abundance of water.
Explanation:
Answer: Temperature
Air pressure
Humidity
Explanation: The temperature of the air causes differences in weather condition. The warmer air causes low pressure and high humidity which contributes to a bad weather. Lower air temperature causes high pressure and low humidity making clear skies and fine weather.
Which two statements describe the
production of soy sauce?
A. When soy sauce is made, yeast
and mold help break down the
sugars to produce various acids
that add to the flavor of the sauce.
B. When soy sauce is made, some
of the alcohol evaporates while the
carbon dioxide that is produced
gives the sauce a unique flavor.
C. When soy sauce is made, the
chemical compound acetaldehyde
gives the sauce its distinctive flavor.
D. To produce soy sauce, bacteria
are added to milk to break down
the sugars into lactic acid and
acetaldehyde.
E. To produce soy sauce, yeast
is added to a mixture of milk and
sugar, and the sugar is converted
into alcohol and carbon dioxide.
F. To produce soy sauce, yeast
and a type of mold are added to a
mixture of soybeans, wheat, and
salt.
The two statements which describe the production of soy sauce.
Option A. When soy sauce is made, yeast and mold help break down the sugars to produce various acids.
Option F. To produce soy sauce, yeast and a type of mold are added to a
mixture of soybeans, wheat, and salt.
Explanation:
Soy sauce is naturally prepared by artisanal brewing and fermentation. The basic ingredients used are soybeans, wheat and salt.
During the brewing process, microbes like mold, yeast or bacteria are added to the basic mixture to ferment. When mold is added to the basic mixture, it ferments and forms a mixture called koji.
Molds like Aspergillus soyae called the koji starter is commonly used. The enzymes present in the mold break the starch in the soy beans and wheat into simpler sugars, and proteins into amino acids, and fats into simpler lipids.
The koji is then treated with yeast and lactic acid bacteria which ferments the koji and forms the moromi which is then processed further to form soy sauce.
The enzymes of the yeast converts the simple sugars into alcohol, CO2 and other organic acids and elements which enhance the flavor of the sauce. Lactic acid bacteria takes the role of converting the sugars into organic acids like aspartic and glutamic acid, and other amines.
A model that helps explain the results of Mendel’s crosses is called a ______.
Answer : A model that helps explain the results of Mendel's crosses is called a (Punnett square).