The energy of a photon is inversely proportional to the wavelength of the radiation. (T/F)

Answers

Answer 1

Answer:

true

Explanation:

Answer 2

The statement "the energy of a photon is inversely proportional to the wavelength of the radiation" is definitely true.

What is Wavelength?

Wavelength may be characterized as the space or distance between two successive crests of a wave that especially includes the points in a sound wave or electromagnetic wave. The wavelength may be represented by a letter known as lambda (λ).

When the energy of the radiation increases, the waves travel faster which directs the small gap between two successive crests. This means that the wavelength decreases.

On contrary, when the energy of the radiation decreases, the waves travel slower which leads to a huge gap between two successive crests. This means that the wavelength increases.

Therefore, the statement "the energy of a photon is inversely proportional to the wavelength of the radiation" is definitely true.

To learn more about Energy and wavelength, refer to the link:

https://brainly.com/question/26637292

#SPJ2


Related Questions

A lightbulb with an intrinsic resistance of 270 \OmegaΩ is hooked up to a 12-volt battery. How much power is output by the lightbulb? Give your answer out to the thousandths place in units of watts (W).

Answers

Answer:

P = 0.533 W

Explanation:

given,

Resistance of the bulb, R = 270 Ω

Potential of the battery, V=  12 V

Power output of the bulb = ?

we know,

P = I² R

also, V = IR

[tex]P = \dfrac{V^2}{R}[/tex]

[tex]P =\dfrac{12^2}{270}[/tex]

[tex]P =\dfrac{144}{270}[/tex]

     P = 0.533 W

Hence, the Power delivered by the bulb is equal to 0.533 W.

Consider a small frictionless puck perched at the top of a xed sphere of radius R. If the puck is given a tiny nudge so that it begins to slide down, through what vertical height will it descend before it leaves the surface of the sphere?

Answers

Answer:

Explanation:

Let the vertical height by which it descends be h . Let it acquire velocity of v .

1/2 mv² = mgh

v² = 2gh

As it leaves the surface of sphere , reaction force of surface  R = 0 , so

centripetal force = mg cosθ where θ is the angular displacement from the vertex .  

mv² / r = mg cosθ

(m/r )x 2gh = mg cosθ

2h / r = cosθ

cosθ = (r-h) / r

2h / r =  r-h / r

2h = r-h

3h = r

h = r / 3

Final answer:

Through conservation of energy and dynamics principles, the puck descends through a height of R/2 from the base of the sphere before losing contact, due to the gravitational force no longer providing sufficient centripetal force.

Explanation:

The question asks through what vertical height a small frictionless puck will descend before it leaves the surface of a fixed sphere of radius R, when given a tiny nudge down the sphere. Using the principles of energy conservation and dynamics, it can be determined that the puck will lose contact with the sphere when the centripetal force is no longer sufficient to provide the necessary force for circular motion, which happens at a height of R/2 from the base of the sphere. This happens because, at this point, the gravitational component acting towards the center of the sphere is exactly equal to the required centripetal force for circular motion. As a result, any further descent would mean this balance is disturbed, causing the puck to leave the surface of the sphere.

A small, charged, spherical object at the origin of a Cartesian coordinate system contains 2.60 × 10 4 more electrons than protons. What is the magnitude of the electric field it produces at the position (2.00 mm, 1.00 mm)?

Answers

Answer:

E = 7.77 N/C

Explanation:

The charge of a single electron is 1.6 x 10^{-19} C. The net charge of the object is therefore the multiplication of the number of excess electrons and the charge of a single electron:

[tex]Q = (2.6\times 10^4) \times 1.6\times 10^{-19} = 4.16 \times 10^{-15}~C[/tex]

The electric field can be found by the following formula

[tex]E = \frac{1}{4\pi\epsilon_0}\frac{Q}{r^2}[/tex]

where 'r' can be calculated as

[tex]r = \sqrt{(2\times 10^{-3})^2 + (1\times 10^{-3})^2} = 0.0022~m\\r^2 = 4.84\times 10^{-6}[/tex]

Finally, the electric field at the position (2.00 mm, 1.00 mm) is

[tex]E = \frac{1}{4\pi(8.8\times 10^{-12})}\frac{4.16\times 10^{-15}}{4.84\times 10^{-6}} = 7.77~N/C[/tex]

The magnitude of the electric field it produces at the position is 7.5 N/C.

The given parameters:

Number of excess electron, n = 2.6 x 10⁴Position of the excess electron, x = (2.00 mm, 1.00 mm)

The position of the charged object is calculated as follows;

[tex]r^2 = (2.0 \times 10^{-3})^2 + (1.0 \times 10^{-3})^2\\\\r^2 = 5\times 10^{-6} \ m^2[/tex]

The charge of the electron is calculated as follows;

[tex]Q = nq\\\\Q = 2.6 \times 10^4 \times 1.6\times 10^{-19}\\\\Q =4.16 \times 10^{-15} \ C[/tex]

The magnitude of the electric field it produces at the position is calculated as follows;

[tex]E = \frac{F}{Q}= \frac{kQ}{r^2} = \frac{9\times 10^9 \times 4.16 \times 10^{-15}}{5\times 10^{-6}} \\\\E = 7.5 \ N/C[/tex]

Learn more about electric field here: https://brainly.com/question/4440057

At the proportional limit, a 2 in. gage length of a 0.500 in. diameter alloy rod has elongated 0.0035 in. and the diameter has been reduced by 0.0003 in. The total tension force on the rod was 5.45 kips. Determine the following properties of the material: (a) the proportional limit. (b) the modulus of elasticity. (c) Poisson’s ratio

Answers

Answer:

a)Proportional limit =  27.756ksi

b) The modulus of elasticity = 15860ksi

c)Poisson ratio = 0.343

Explanation:

The detailed steps and calculation is as shown in the attached file.

A bicyclist is finishing his repair of a flat tire when a friend rides by with a constant speed of 3.63 m/s. Four seconds later, the bicyclist hops on his bike and accelerates at 2.11 m/s2 until he catches his friend. a. How much time does it take until he catches his friend?(b) How far has he traveled in this time? (c) What is his speed when he catches up?

Answers

Answer:

a. [tex]t=3.44s[/tex]

b. [tex]x=12.45m[/tex]

c. [tex]v_f=7.26\frac{m}{s}[/tex]

Explanation:

The bicyclist's friend moves with constant speed. So, we have:

[tex]x=vt[/tex]

Th bicyclist moves with constant acceleration and starts at rest ([tex]v_0=0[/tex]). So, we have:

[tex]x=v_0t+\frac{at^2}{2}\\x=\frac{at^2}{2}[/tex]

a. When he catches his friend, both travels the same distance, thus:

[tex]vt=\frac{at^2}{2}\\t=\frac{2v}{a}\\t=\frac{2(3.63\frac{m}{s})}{2.11\frac{m}{s^2}}\\t=3.44s[/tex]

b. We can use any of the distance equations, since both travels the same distance:

[tex]x=vt\\x=3.63\frac{m}{s}(3.44s)\\x=12.45m[/tex]

c. The bicyclist final speed is:

[tex]v_f=v_0+at\\v_f=at\\v_f=2.11\frac{m}{s^2}(3.44s)\\v_f=7.26\frac{m}{s}[/tex]

A small glass bead charged to 5.0 nCnC is in the plane that bisects a thin, uniformly charged, 10-cmcm-long glass rod and is 4.0 cmcm from the rod's center. The bead is repelled from the rod with a force of 840 μNμN.What is the total charge on the rod?

Answers

Answer:

The total charge on the rod is 47.8 nC.

Explanation:

Given that,

Charge = 5.0 nC

Length of glass rod= 10 cm

Force = 840 μN

Distance = 4.0 cm

The electric field intensity due to a uniformly charged rod of length L at a distance x on its perpendicular bisector

We need to calculate the electric field

Using formula of electric field intensity

[tex]E=\dfrac{kQ}{x\sqrt{(\dfrac{L}{2})^2+x^2}}[/tex]

Where, Q = charge on the rod

The force is on the charged bead of charge q placed in the electric field of field strength E

Using formula of force

[tex]F=qE[/tex]

Put the value into the formula

[tex]F=q\times\dfrac{kQ}{x\sqrt{(\dfrac{L}{2})^2+x^2}}[/tex]

We need to calculate the total charge on the rod

[tex]Q=\dfrac{Fx\sqrt{(\dfrac{L}{2})^2+x^2}}{kq}[/tex]

Put the value into the formula

[tex]Q=\dfrac{840\times10^{-6}\times4.0\times10^{-2}\sqrt{(\dfrac{10.0\times10^{-2}}{2})^2+(4.0\times10^{-2})^2}}{9\times10^{9}\times5.0\times10^{-9}}[/tex]

[tex]Q=47.8\times10^{-9}\ C[/tex]

[tex]Q=47.8\ nC[/tex]

Hence, The total charge on the rod is 47.8 nC.

Final answer:

Using Coulomb's Law, the charge on the rod is calculated to be 7.5 *10⁻⁶ C by rearranging the formula and solving for the rod's charge with the provided force and the charge on the bead.

Explanation:

To determine the total charge on the rod, we can use Coulomb's Law, which states that the electric force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. In this case, the glass bead is assumed to act like a point charge, and we can treat the charge distribution on the thin glass rod as uniform.

The formula for Coulomb's Law is:

F = k * |q₁ * q₂| / r²

where:

F is the magnitude of the force between the charges,

k is Coulomb's constant (8.988 * 10⁹ N m²/C²),

q₁ and q₂ are the amounts of the charges, and

r is the distance between the centers of the two charges.

Given that the force F is 840 * 10⁻⁶ N and charge on bead q₁ is 5.0 * 10⁻⁹ C, and the distance r is 4.0 * 10⁻² m, we can rearrange the formula to solve for the charge on the rod (q₂):

q₂ = F * r² / (k * q₁)

Plugging in the values, we can calculate as follows:

q₂ = (840 *10⁻⁶ N) * (4.0 *10^⁻² m)² / (8.988 *10⁹ N m²/C² * 5.0 *10⁻⁹ C)

Calculating the charge on the rod:

q₂ = 0.0075 C

or

q₂ = 7.5 * 10⁻⁶ C

This value represents the total charge on the rod.

A rocket is fired straight up. It contains two stages (Stage 1 and Stage 2) of solid rocket fuel that are designed to burn for 10.0 and 5.00 s, respectively, with no time interval between them. In Stage 1, the rocket fuel provides an upward acceleration of 16.0 m/s^2. In Stage 2, the acceleration is 11.0 m/s2. Neglecting air resistance, calculate the maximum altitude above the surface of Earth of the payload and the time required for it to return to the surface. Assume the acceleration due to gravity is constant.a. Calculate the maximum altitude. (Express your answer to two significant figures.)b. Calculate time required to return to the surface (i.e. the total time of flight). (Express your answer to three significant figures.)

Answers

Answer:

a)  y= 3.5 10³ m, b)   t = 64 s

Explanation:

a) For this exercise we use the vertical launch kinematics equation

Stage 1

          y₁ = y₀ + v₀ t + ½ a t²

          y₁ = 0 + 0 + ½ a₁ t²

Let's calculate

         y₁ = ½ 16 10²

         y₁ = 800 m

At the end of this stage it has a speed

        v₁ = vo + a₁ t₁

        v₁ = 0 + 16 10

        v₁ = 160 m / s

Stage 2

        y₂ = y₁ + v₁ (t-t₀) + ½ a₂ (t-t₀)²

        y₂ = 800 + 150 5 + ½ 11 5²

        y₂ = 1092.5 m

Speed ​​is

        v₂ = v₁ + a₂ t

        v₂ = 160 + 11 5

        v₂ = 215 m / s

The rocket continues to follow until the speed reaches zero (v₃ = 0)

         v₃² = v₂² - 2 g y₃

         0 = v₂² - 2g y₃

         y₃ = v₂² / 2g

         y₃ = 215²/2 9.8

         y₃ = 2358.4 m

The total height is

          y = y₃ + y₂

          y = 2358.4 + 1092.5

          y = 3450.9 m

           y= 3.5 10³ m

b) Flight time is the time to go up plus the time to go down

Let's look for the time of stage 3

          v₃ = v₂ - g t₃

          v₃ = 0

          t₃ = v₂ / g

          t₃ = 215 / 9.8

          t₃ = 21.94 s

The time to climb is

          [tex]t_{s}[/tex] = t₁ + t₂ + t₃

          t_{s} = 10+ 5+ 21.94

          t_{s} = 36.94 s

The time to descend from the maximum height is

          y = v₀ t - ½ g t²

When it starts to slow down it's zero

         y = - ½ g t_{b}²

         t_{b}  = √-2y / g

         

        t_{b} = √(- 2 (-3450.9) /9.8)

        t_{b} = 26.54 s

Flight time is the rise time plus the descent date

        t = t_{s} + t_{b}

        t = 36.94 + 26.54

        t =63.84 s

        t = 64 s

An ethernet cable is 3.80 m long and has a mass of 0.210 kg. A transverse pulse is produced by plucking one end of the taut cable. The pulse makes four trips down and back along the cable in 0.735 s. What is the tension in the cable?

Answers

Answer:

[tex]T=94.54N[/tex]

Explanation:

The tension in a cable is given by:

[tex]T=\mu v^2(1)[/tex]

Where [tex]\mu[/tex] is the mass density of the cable and v is the speed of the cable's pulse. These values are defined as:

[tex]\mu=\frac{m}{L}(2)\\v=\frac{d}{t}[/tex]

The pulse makes four trips down and back along the cable, so [tex]d=4(2L)[/tex]

[tex]v=\frac{8L}{t}(3)[/tex]

Replacing (2) and (3) in (1), we calculate the tension in the cable:

[tex]T=\frac{m}{L}(\frac{8L}{t})^2\\T=\frac{64mL}{t^2}\\T=\frac{64(0.21kg(3.80m))}{(0.735s)^2}\\T=94.54N[/tex]

Finally, consider the expression (6.67×10^−11)(5.97×10^24)/(6.38×10^6)^2. Determine the values of a and k when the value of this expression is written in scientific notation. Enter a and k, separated by commas.

Answers

Answer:

[tex]x=9.78\times 10^0[/tex]

Explanation:

In this case, we need to find the value of expression :

[tex]x=\dfrac{(6.67\times 10^{-11})\times (5.97\times 10^{24})}{(6.38\times 10^6)^2}[/tex]

On solving, we get the value of given expression as :

x = 9.7827

In scientific notation, we get the value of x as :

[tex]x=a\times 10^k[/tex]

[tex]x=9.78\times 10^0[/tex]

a = 9.78

k = 0

Hence, this is the required solution.

Final answer:

To express the given expression in scientific notation, we find a = 9.78 and k = -1 after evaluating the expression using the laws of exponentiation and division.

Explanation:

The student's question involves evaluating an expression using scientific notation and expressing the result in proper scientific notation.

To solve (6.67×10−11)(5.97×1024) / (6.38×106)2, we need to use the laws of exponentiation and multiplication. Simplify the expression within the numerator and denominator separately before dividing them.

Numerator: (6.67×10−11)(5.97×1024) = 39.8309×1013

Denominator: (6.38×106)2 = 40.7044×1012

Divide the simplified numerator by the simplified denominator:
39.8309×1013 / 40.7044×1012 = 0.978×101

To express this in proper scientific notation, rewrite 0.978×101 as 9.78×10−0.

Therefore, the values of a and k when the value of this expression is written in scientific notation are a = 9.78 and k = −0.

If the pressure inside the cylinder increases to 1.6 atm, what is the final volume, in milliliters, of the cylinder?

Answers

This is a physics problem related to Boyle's Law, which says that the volume of a gas decreases if its pressure increases, assuming constant temperature. We can't solve for the final volume specifically in this case since the initial pressure and volume aren't given, but if they were, we'd use the formula V₂ = (P₁V₁) / P₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

This question is related to the concept of Boyle's Law in physics, which states that the pressure and volume of a gas have an inverse relationship, when temperature is held constant. If the pressure of the gas inside a cylinder is increased, the volume decreases, assuming the amount of gas and the temperature remain constant.

In this case without knowing the initial pressure and volume of the cylinder, it's impossible to calculate the exact final volume after the pressure has increased to 1.6 atm. However, the base formula you'd use to find out your final volume, given you had initial values for volume (V₁) and pressure (P₁), is: P₁V₁ = P₂V₂.

In this formula, P₁ and V₁ refer to the initial pressure and volume, while P₂ and V₂ refer to the final pressure and volume. To solve for the final volume (V₂), you would rearrange the formula to be V₂ = (P₁V₁) / P₂. So, if you were given the initial pressure and volume, you could substitute those values into the formula, along with the final pressure of 1.6 atm, to find the final volume.

For more such questions on Boyle's Law, click on:

https://brainly.com/question/2862004

#SPJ3

In this case, the final volume is 31.1 mL.

The final volume of the helium in milliliters can be calculated using Boyle's Law, which states that the product of pressure and volume is constant for a given amount of gas at constant temperature. Initially, the pressure is 447 torr, and the volume is 86.4 mL. When the pressure increases to 1,240 torr, the final volume can be found using the formula:

P1V1 = P2V2

Solving for the final volume, V2, we get:

V2 = (P1V1) / P2

Substitute the given values:

V2 = (447 torr× 86.4 mL) / 1,240 torr

= 31.1 mL

George determines the mass of his evaporating dish to be 3.375 g. He adds a solid sample to the evaporating dish, and the mass of them combined is 26.719 g. What must be the mass of his solid sample

Answers

Explanation:

The given data is as follows.

       Mass of evaporating dish = 3.375 g

    Total mass = Mass of solid sample + evaporating dish

That is, Mass of solid sample + evaporating dish = 26.719 g

Therefore, we will calculate the mass of solid sample as follows.

    Mass of solid sample = (Mass of solid sample + evaporating dish) - mass of evaporating dish

                            = 26.719 g – 3.375 g

                            = 23.344 g

Thus, we can conclude that mass of his solid sample must be 23.344 g.

Final answer:

The mass of the solid sample is 23.344 g.

Explanation:

In order to find the mass of the solid sample, we need to subtract the mass of the evaporating dish from the combined mass of the dish and the sample. The mass of the solid sample can be calculated by subtracting 3.375 g (mass of the evaporating dish) from 26.719 g (combined mass of dish and sample).

Mass of solid sample = 26.719 g - 3.375 g = 23.344 g.

Therefore, the mass of the solid sample is 23.344 g.

Learn more about mass here:

https://brainly.com/question/35704156

#SPJ3

A gang of robbers is escaping across city roofs at night. They come to the edge of one building and need to drop down to their getaway car, but aren't entirely sure if they can make the jump or need to head through the building. a) If one of them drops a pebble off the edge of the roof and it hits the ground two seconds later, how fast will they hit the ground if they jump? Give answers in terms of meters per second. b) How high up are they? Give answers in terms of meters. c) Is this a safe jump?

Answers

Answer:

a) They will hit the ground with a speed of 19.6 m/s.

b) They are at a height of 20 m.

c) It is not a safe jump.

Explanation:

Hi there!

a) The equations of height and velocity in function of time of a free falling body are the following:

h = h0 + v0 · t + 1/2 · g · t²

v = v0 + g · t

Where:

h = height of the object at time t.

h0 = initial height.

v0 = initial velocity.

t = time.

g = acceleration due to gravity (-9.8 m/s² considering downward as negative direction).

v = velocity of the object at time t.

Using the equation of velocity, let's find the velocity at which they will hit the ground. The pebble is dropped (initial velocity = 0) and it takes 2 s to reach the ground:

v = v0 + g · t     (v0 = 0)

v = g · t

v = -9.8 m/s² · 2.0 s

v = -19.6 m/s

They will hit the ground with a speed of 19.6 m/s.

b)Now, we have to use the equation of height:

h = h0 + v0 · t + 1/2 · g · t²

If we place the origin of the frame of reference on the ground, we have to find the initial height (h0) knowing that at t = 2.0 s, h = 0 m

0 m = h0 - 1/2 · 9.8 m/s² · (2.0 s)²

h0 = 1/2 · 9.8 m/s² · (2.0 s)²

h0 = 20 m

They are at a height of 20 m.

c)According to a NASA paper (Issues on Human Acceleration Tolerance After Long-Duration Space Flights, figure 10), if you fall with a vertical velocity greater than 17 m/s it is unlikely that you will survive. So, it is not a safe jump.  

A helicopter carrying Dr. Evil takes off with a constant upward acceleration of 5.0 m/s2. Secret agent Austin Powers jumps on just as the helicopter lifts off the ground. After the two men struggle for 10.0 s, Powers shuts off the engine and steps out of the helicopter. Assume that the helicopter is in free fall after its engine is shut off, and ignore the effects of air resistance. (a) What is the maximum height above ground reached by the helicopter? (b) Powers deploys a jet pack strapped on his back 7.0 s after leaving the helicopter, and then he has a constant downward acceleration with magnitude 2.0 m/s2. How far is Powers above the ground when the helicopter crashes into the ground?

Answers

Answer:

a) [tex]h=250\ m[/tex]

b) [tex]\Delta h=0.0835\ m[/tex]

Explanation:

Given:

upward acceleration of the helicopter, [tex]a=5\ m.s^{-2}[/tex]time after the takeoff after which the engine is shut off, [tex]t_a=10\ s[/tex]

a)

Maximum height reached by the helicopter:

using the equation of motion,

[tex]h=u.t+\frac{1}{2} a.t^2[/tex]

where:

u = initial velocity of the helicopter = 0 (took-off from ground)

t = time of observation

[tex]h=0+0.5\times 5\times 10^2[/tex]

[tex]h=250\ m[/tex]

b)

time after which Austin Powers deploys parachute(time of free fall), [tex]t_f=7\ s[/tex]acceleration after deploying the parachute, [tex]a_p=2\ m.s^{-2}[/tex]

height fallen freely by Austin:

[tex]h_f=u.t_f+\frac{1}{2} g.t_f^2[/tex]

where:

[tex]u=[/tex] initial velocity of fall at the top = 0 (begins from the max height where the system is momentarily at rest)

[tex]t_f=[/tex] time of free fall

[tex]h_f=0+0.5\times 9.8\times 7^2[/tex]

[tex]h_f=240.1\ m[/tex]

Velocity just before opening the parachute:

[tex]v_f=u+g.t_f[/tex]

[tex]v_f=0+9.8\times 7[/tex]

[tex]v_f=68.6\ m.s^{-1}[/tex]

Time taken by the helicopter to fall:

[tex]h=u.t_h+\frac{1}{2} g.t_h^2[/tex]

where:

[tex]u=[/tex] initial velocity of the helicopter just before it begins falling freely = 0

[tex]t_h=[/tex] time taken by the helicopter to fall on ground

[tex]h=[/tex] height from where it falls = 250 m

now,

[tex]250=0+0.5\times 9.8\times t_h^2[/tex]

[tex]t_h=7.1429\ s[/tex]

From the above time 7 seconds are taken for free fall and the remaining time to fall with parachute.

remaining time,

[tex]t'=t_h-t_f[/tex]

[tex]t'=7.1428-7[/tex]

[tex]t'=0.1428\ s[/tex]

Now the height fallen in the remaining time using parachute:

[tex]h'=v_f.t'+\frac{1}{2} a_p.t'^2[/tex]

[tex]h'=68.6\times 0.1428+0.5\times 2\times 0.1428^2[/tex]

[tex]h'=9.8165\ m[/tex]

Now the height of Austin above the ground when the helicopter crashed on the ground:

[tex]\Delta h=h-(h_f+h')[/tex]

[tex]\Delta h=250-(240.1+9.8165)[/tex]

[tex]\Delta h=0.0835\ m[/tex]

If you drop a feather and a steel hammer at the same moment, they should hit the ground at the same instant. Why doesn’t this work on Earth, and why does it work on the Moon?

Answers

Answer:

Air Resistance

Explanation:

If you were to drop both items on a plant without an atmosphere, they would both hit the ground at the same time. Since a feather doesn't have much mass compared to the hammer, it takes more time for the feather to "push" itself through and overcome the opposite push from the air

Final answer:

On Earth, air resistance prevents a feather and a hammer from hitting the ground simultaneously when dropped from the same height. On the Moon, the absence of an atmosphere means no air resistance, allowing both objects to land at the same time in accordance with Galileo's principle of the universality of free fall.

Explanation:

If you drop a feather and a steel hammer at the same moment, they should hit the ground at the same time according to Galileo's principle of the universality of free fall. However, this does not occur on Earth due to the presence of air resistance. The feather experiences a significant amount of air resistance because of its shape and light weight, causing it to flutter and fall slower than the hammer.

On the Moon, where there is no atmosphere, there is no air resistance to act on the objects. When Apollo 15 astronaut David Scott conducted the experiment on the Moon, both the hammer and feather fell at the same acceleration and hit the lunar surface simultaneously. This specific demonstration was a perfect illustration of the universality of free fall in the absence of external forces besides gravity. On the Moon, the acceleration due to gravity is only 1.67 m/s², which is less than on Earth, but since it acts equally on all objects, both the feather and the hammer fell at the same rate.

How much stronger is the gravitational pull of the Sun on Earth, at 1 AU, than it is on Saturn at 10 AU?

Answers

answer: The gravitational pull would be 100x stronger

A 500-g sample of sand in the SSD condition was placed in a jar, which was then filled with water. The combined weight was 1697 g. The weight of the jar filled with the water only was 1390 g. Calculate the bulk specific gravity (SSD) of the sand.

Answers

Final answer:

The bulk specific gravity (SSD) of the sand is 0.221.

Explanation:

The bulk specific gravity (SSD) of the sand can be calculated using the given information. The combined weight of the sand and water is 1697 g, and the weight of the jar filled with water only is 1390 g. To find the weight of the sand in the SSD condition, we subtract the weight of the jar filled with water from the combined weight: 1697 g - 1390 g = 307 g. Therefore, the bulk specific gravity (SSD) of the sand is the weight of the sand divided by the weight of an equal volume of water, which is 307 g / 1390 g = 0.221.

Neptunium. In the fall of 2002, scientists at Los Alamos National Laboratory determined that the critical mass of neptunium-237 is about 60 kg. The critical mass of a fissionable material is the minimum amount that must be brought together to start a nuclear chain reaction. Neptunium-237 has a density of 19.5 g/cm3. What would be the radius of a sphere of this material that has a critical mass?

Answers

To solve this problem it is necessary to apply the concepts related to density, such as the relationship between density and Volume.

The volume of a sphere can be expressed as

[tex]V = \frac{4}{3} \pi r^3[/tex]

Here r is the radius of the sphere and V is the volume of Sphere

Using the expression of the density we know that

[tex]\rho = \frac{m}{V} \rightarrow V = \frac{m}{\rho}[/tex]

The density is given as

[tex]\rho = (19.5g/cm^3)(\frac{10^3kg/m^3}{1g/cm^3})[/tex]

[tex]\rho = 19.5*10^3kg/m^3[/tex]

Now replacing the mass given and the actual density we have that the volume is

[tex]V = \frac{60kg}{19.5*10^3kg/m^3 }[/tex]

[tex]V = 3.0769*10^{-3} m ^3[/tex]

The radius then is,

[tex]V = \frac{4}{3} \pi r^3[/tex]

[tex]r = \sqrt[3]{\frac{3V}{4\pi}}[/tex]

Replacing,

[tex]r = \sqrt[3]{\frac{3(3.0769*10^{-3})}{4\pi}}[/tex]

The radius of a sphere made of this material that has a critical mass is 9.02 cm.

The density of liquid oxygen at its boiling point is 1.14 kg/Lkg/L , and its heat of vaporization is 213 kJ/kgkJ/kg . How much energy in joules would be absorbed by 2.0 LL of liquid oxygen as it vaporized? Express your answer to two significant figures and include the appropriate units.

Answers

Answer:

heat absorbed = 4.9 × [tex]10^{5}[/tex] J

Explanation:

given data

density of liquid oxygen =  1.14 kg/L

volume = 2 L

heat of vaporization  = 213 kJ/kg

solution

first we get here mass of liquid that is

mass of liquid = density × volume   ......................1

mass of liquid =  1.14 × 2  

mass of liquid = 2.28 kg

so here we get now heat absorbed that is

heat absorbed = mass × heat of vaporization

heat absorbed = 2.28 kg × 213 kJ/kg

heat absorbed = 485.640 kJ

heat absorbed = 4.9 × [tex]10^{5}[/tex] J

Final answer:

To find the energy absorbed by 2.0 L of liquid oxygen as it vaporizes, you first convert the volume to mass using the given density and then multiply by the heat of vaporization. The resulting energy is approximately 4.86 x 10^5 J or 486 kJ.

Explanation:

The energy absorbed by a volume of liquid oxygen as it vaporizes can be calculated using the formula Q = mLv. In this equation, 'm' represents mass, 'Lv' represents the heat of vaporization, and 'Q' represents the total energy absorbed.

Firstly, convert the volume of liquid oxygen to mass. The density of liquid oxygen at its boiling point is 1.14 kg/L, so the mass of 2.0 L of liquid oxygen would be (1.14 kg/L) * (2.0 L) = 2.28 kg.

Then, use the heat of vaporization and the calculated mass to find the total energy. The heat of vaporization of oxygen is 213 kJ/kg, so Q = (2.28 kg) * (213 kJ/kg) = 485.64 kJ. This needs to be expressed in joules by multiplying by 10^3, resulting in 485640 J. Therefore, the energy absorbed by 2.0 L of liquid oxygen as it vaporizes is approximately 4.86 x 10^5 J.

Learn more about Energy Absorption here:

https://brainly.com/question/34171407

#SPJ12

Why do atoms absorb and reemit radiation at characteristic frequencies?

Answers

To answer this question it is necessary to use the Bohr Model as a theoretical reference. According to this model, the energy levels of an atom are divided by discrete and characteristic energies. When there is the emission or absorption of a photon with a characteristic energy there is a transition of another energy level, which is equal to the level of atomic energy. Since the energy of a photo is directly proportional to its frequency, the emitted or absorbed photons have characteristic frequencies to the difference in energy between atomic energy levels.

In the image below, if the engine backs up in order to couple (join) with several more train cars and push them backwards, what explanation best describes the type of collision it is?


A.It is an inelastic collision because the collision conserves momentum.

B. It is an inelastic collision because the train cars stick together and move as one.

C. It is an elastic collision because the collision conserves momentum.

D. It is an elastic collision because the cars stick together and move as one unit.

Answers

Answer:

B. It is an inelastic collision because the train cars stick together and move as one.

Explanation:

Momentum

When two or more objects collide in a closed system (no external forces are acting) the total momentum is conserved:

[tex]m_1v_1+m_2v_2+...+m_nv_n=m_1v_1'+m_2v_2'+...+m_nv_n'[/tex]

where m1...m2 are the masses of each object, v1...vn are their velocities before the collision takes place and v'1...v'n are their velocities after the collision.

If a collision is elastic, then the kinetic energy is also conserved. when the collision is inelastic, part of the initial kinetic energy is lost. A typical case of inelastic collision occurs when the objects join and remain together after the collision. The velocity is common to all of them and the mass is the sum of the individual masses.

This is exactly the case described in the question: serveral train cars are joined and continue moving together after the collision. It corresponds to a inelastic collision described in the option B.

The ball will oscillate along the z axis between z=dz=d and z=−dz=−d in simple harmonic motion. What will be the angular frequency ωωomega of these oscillations? Use the approximation d≪ad≪a to simplify your calculation; that is, assume that d2+a2≈a2d2+a2≈a2. Express your answer in terms of given charges, dimensions, and constants.

Answers

Answer:

[tex]\omega = \sqrt{\dfrac{kq_0Q}{ma^3} }[/tex]

Explanation:

Additional information:

The ball has charge [tex]-q_0[/tex], and the ring has  positive charge [tex]+Q[/tex] distributed uniformly along its circumference.

The electric field at distance [tex]z[/tex] along the z-axis due to the charged ring is

[tex]E_z= \dfrac{kQz}{(z^2+a^2)^{3/2}}.[/tex]

Therefore, the force on the ball with charge [tex]-q_0[/tex] is

[tex]F=-q_oE_z[/tex]

[tex]F=- \dfrac{kq_0Qz}{(z^2+a^2)^{3/2}}[/tex]

and according to Newton's second law

[tex]F=ma=m\dfrac{d^2z}{dz^2}[/tex]

substituting [tex]F[/tex] we get:

[tex]- \dfrac{kq_0Qz}{(z^2+a^2)^{3/2}}=m\dfrac{d^2z}{dz^2}[/tex]

rearranging we get:

[tex]m\dfrac{d^2z}{dz^2}+ \dfrac{kq_0Qz}{(z^2+a^2)^{3/2}}=0[/tex]

Now we use the approximation that

[tex]z^2+a^2\approx a^2[/tex] (we use this approximation instead of the original [tex]d^2+a^2\approx a^2[/tex] since [tex]z<d[/tex], our assumption still holds )

and get

[tex]m\dfrac{d^2z}{dz^2}+ \dfrac{kq_0Qz}{(a^2)^{3/2}}=0[/tex]

[tex]m\dfrac{d^2z}{dz^2}+ \dfrac{kq_0Qz}{a^{3}}=0[/tex]

Now the last equation looks like a Simple Harmonic Equation

[tex]m\dfrac{d^2z}{dz^2}+kz=0[/tex]

where

[tex]\omega=\sqrt{ \dfrac{k}{m} }[/tex]

is the frequency of oscillation. Applying this to our equation we get:

[tex]m\dfrac{d^2z}{dz^2}+ \dfrac{kq_0Q}{a^{3}}z=0\\\\m=m\\\\k= \dfrac{kq_0Q}{a^{3}}[/tex]

[tex]\boxed{\omega = \sqrt{\dfrac{kq_0Q}{ma^3} }}[/tex]

For the following statements, choose the word or words inside the parentheses that serve to make a correct statement. Each statement has at least one and may have more than one correct answer. a. For a sample of an ideal gas, the product pV remains constant as long as the (temperature, pressure, volume, internal energy) is held constant. b. The internal energy of an ideal gas is a function of only the (volume, pressure, temperature). c. The Second Law of Thermodynamics states that the entropy of an isolated system always (increases, remains constant, decreases) during a spontaneous process. d. When a sample of liquid is converted reversibly to its vapor at its normal boiling point, ( q, w, p, V, T, U, H, S, G, none of these) is equal to zero for the system. e. If the liquid is permitted to vaporize isothermally and completely into a previously evacuated chamber that is just large enough to hold the vapor at 1 bar pressure, then ( q, w, U, H, S, G ) will be smaller in magnitude than for the reversible vaporizatio

Answers

Answer:

a) Temperatura, b) Temperature, c)    Constant , d)  None of these , e) Gibbs enthalpy and free energy (G)

Explanation:

a) the expression for ideal gases is PV = nRT

     Temperature

b) The internal energy is E = K T

      Temperature

c)  S = ΔQ/T

In an isolated system ΔQ is zero, entropy  is constant

       Constant

d) all parameters change when changing status

        None of these

e) Gibbs enthalpy and free energy

When the leaves of an electroscope are spread apart: a. A negatively charged object must be touching the knob of the electroscope. b. The leaves have the same charge. c. A positively charged object must be touching the knob of the electroscope. d. The leaves are neutral.

Answers

Answer:

B

Explanation:

The electroscope device is used to detect the presence of charge and it's relative amount. If a charged object is brought near the top of the electroscope(for a example positive charge) the leaves at the bottom spread apart. The leaves diverge further: The positive charge on the leaves has increased further. This happens when positive charge is produced on the leaves by the charged object. This is possible when the object is positively charged.The greater the charge, the farther apart they move.

Answer:

B. The leaves have the same charge.

Explanation:

An electroscope is a device used to detect the presence of electric charges. However, to detect charge in an object, it requires hundreds of volts, that's why is only used with high voltage sources.

An important matter is that an electroscope follows the Coulomb electrostatic force, which is a law of physics that quantifies the amount of force between two charged particles, which are stationary.

Having said that, when two charged particles have the same nature, then they will spread apart. Same nature means both negative or both positive.

Therefore, the right answer is B.

Two construction cranes are each able to lift a maximum load of 20000 N to a height of 250 m. However, one crane can lift that load in 1 6 the time it takes the other. How much more power does the faster crane have?

Answers

Answer:

Explanation:

Given

Load [tex]W=20000\ N[/tex]

height to which load is raised [tex]h=250\ m[/tex]

Another crane take [tex]\frac{1}{6}[/tex] th time to lift the load

Energy required required to lift the Weight

[tex]E=W\times h[/tex]

[tex]E=20000\times 250[/tex]

[tex]E=5,000,000\ J[/tex]

Suppose [tex]P_1[/tex] and [tex]P_2[/tex] is the Power required to lift the weight in t and [tex]\frac{t}{6}[/tex] time

[tex]E=P_1\times t[/tex]

[tex]E=P_2\times \frac{t}{6}[/tex]

[tex]P_1\times t=P_2\times \frac{t}{6}[/tex]

thus

[tex]P_2=6P_1[/tex]

Second Crane requires 6 times  more power than the slow crane                                              

Final answer:

The power of the faster crane is 6 times greater than the power of the slower crane.

Explanation:

To calculate the power of the cranes, we need to use the formula:

Power = Work/Time

The work done by each crane is equal to the maximum load lifted multiplied by the height lifted, so:

Work = Load x Height

Let's assume the time taken by the slower crane is t. Therefore, the time taken by the faster crane is t/6.

Now, let's calculate the power of each crane:

Power of slower crane = Work/Time = (20000 N x 250 m) / t = 5000000 Nm/t

Power of faster crane = Work/Time = (20000 N x 250 m) / (t/6) = 30000000 Nm/t

The power of the faster crane is 6 times greater than the power of the slower crane.

Learn more about Power in cranes here:

https://brainly.com/question/20515517

#SPJ3

Two point charges, +2.20 μC and -8.00 μC, are separated by 2.60 m. What is the electric potential midway between them? Number Units

Answers

Answer:

Electric potential, [tex]V=-4.01\times 10^4\ volts[/tex]

Explanation:

Given that,

Charge 1, [tex]q_1=2.2\ \mu C[/tex]

Point charge 2, [tex]q_2=-8\ \mu C[/tex]

Distance between charges, d = 2.6 m

We need to find the electric potential midway between them. The electric potential is given by :

[tex]V=\dfrac{kq}{r}[/tex]

In this case, r = 1.3 m (midway between charges)

[tex]V=\dfrac{kq_1}{r}-\dfrac{kq_2}{r}[/tex]

[tex]V=\dfrac{k}{r}(q_1-q_2)[/tex]

[tex]V=\dfrac{9\times 10^9}{1.3}(2.2\times 10^{-6}-8\times 10^{-6})[/tex]

[tex]V=-40153.84\ volts[/tex]

or

[tex]V=-4.01\times 10^4\ volts[/tex]

So, the electric potential midway between the charges is [tex]V=-4.01\times 10^4\ volts[/tex]. Hence, this is the required solution.

Final answer:

The electric potential midway between two point charges of +2.20 μC and -8.00 μC, separated by 2.60 m, is calculated separately for each charge using the formula V = kq/r and summed up. The total electric potential at the midpoint is -4.00 × 10⁴ V.

Explanation:

To find the electric potential midway between two point charges, we need to consider the contribution from each charge separately and then sum them up.

The electric potential V due to a single point charge q at a distance r is given by the formula:

V = kq/r

where k is the Coulomb's constant (k ≈ 8.99 × 109 Nm²/C²).

In this case, we have two charges, +2.20 μC and -8.00 μC, and they are separated by 2.60 m. So the distance from the midpoint to each charge is 1.30 m (half of 2.60 m).

Calculating the potential due to the +2.20 μC charge:

V₁ = (8.99 × 109)(+2.20 × 10⁻⁶) / 1.30 = 1.53 × 10⁴ V

And for the -8.00 μC charge:

V₂ = (8.99 × 10⁹)(-8.00 × 10⁻⁶) / 1.30 = -5.53 × 10⁴ V

The total electric potential at the midpoint is the sum of V₁ and V₂:

Vtotal = V₁ + V₂ = 1.53 × 10⁴ V - 5.53 × 10⁴ V = -4.00 × 10⁴V

The electric potential midway between the two charges is -4.00 × 10⁴V.

How strong is the attractive force between a glass rod with a 0.700 μC charge and a silk cloth with a –0.600 μC charge, which are 12.0 cm apart, using the approximation that they act like point charges?

Answers

Answer:

[tex]F=0.26N[/tex]

Explanation:

Assuming that thet act like point charges, the attractive force is given by Coulomb's law:

[tex]F=\frac{kq_1q_2}{d^2}[/tex]

Where k is the Coulomb constant, [tex]q_1[/tex] and [tex]q_2[/tex] are the magnitudes of the point charges and d is the distance of separation between them. Thus, we replace the given values and get how strong is the attractive force between them:

[tex]F=\frac{8.99*10^{9}\frac{N\cdot m^2}{C^2}(0.7*10^{-6}C)(-0.6*10^{-6}C)}{(12*10^{-2}m)^2}\\F=0.26N[/tex]

The atomic radii of a divalent cation and a monovalent anion are 0.35 nm and 0.129 nm, respectively.(a) Calculate the force of attraction between these two ions at their equilibrium interionic separation (i.e., when the ions just touch one another).Enter your answer for part (a) in accordance to the question statement N(b) What is the force of repulsion at this same separation distance?

Answers

Answer:

a) The force of attraction between these two ions at their equilibrium interionic separation (i.e., when the ions just touch one another) is - 2.01 × 10⁻⁹ N

b) The force of repulsion at this same separation distance is 2.01 × 10⁻⁹ N

Explanation:

F = kq₁q₂/r²

r = 0.35 + 0.129 (since the ions are just touching each other)

r = 0.479 nm = 4.79 × 10⁻¹⁰ m

Since the first ion is a divalent cation, Z₁ = +2 and the monovalent anion, Z₂ = -1

q = Ze; e = 1.602 × 10⁻¹⁹ C

K = 8.99 × 10⁹ Nm²/C²

F = (8.99 × 10⁹)(1.602 × 10⁻¹⁹)²(2)(-1)/(4.79 × 10⁻¹⁰)² = - 2.01 × 10⁻⁹ N

b) At equilibrium,

Force of attraction + Force of repulsion = 0

Force of repulsion = -(Force of attraction) = 2.01 × 10⁻⁹ N

By what factor does the energy of a 1-nm X-ray photon exceed that of a 10-MHz radio photon? How many times more energy has a 1-nm gamma ray than a 10-MHz radio photon?

Answers

To solve this problem we will apply the concepts related to the relationship between energy and frequency, from the latter we will obtain similar expressions that relate to the wavelength to find the two energy states between the given values. Finally we will make the comparative radius between the two. The relation between energy and frequency is given as,

[tex]E = hf[/tex]

Here,

E = Energy

h = Planck's constant

The relation between the speed of the electromagnetic waves (c), frequency (f) and wavelength ([tex]\lambda[/tex] ) is,

[tex]c = f\lambda[/tex]

Rearrange the above equation for frequency f as follows

[tex]f = \frac{c}{\lambda}[/tex]

Substitute,

[tex]E = h\frac{c}{\lambda}[/tex]

The wavelength x-ray or gamma ray photon is

[tex]\lambda = 1.0nm (\frac{1nm}{10^{9}nm})[/tex]

[tex]\lambda = 10^{-9} m[/tex]

Therefore the energy would be,

[tex]E_1 = \frac{hc}{\lambda}[/tex]

[tex]E_1 = \frac{(6.63*!0^{-34}J\cdo s)(3*10^{8}m/s)}{10^{-9}m}[/tex]

[tex]E_1 = 19.89*10^{-17} J[/tex]

The frequency is given as,

[tex]f = 10MHz (\frac{10^6z}{1.0MHz})[/tex]

[tex]f = 10^7Hz[/tex]

Now the second energy would be

[tex]E_2 = hf[/tex]

[tex]E_2 = (6.63*10^{-27}J\cdot s)(10^7Hz)[/tex]

[tex]E_2 = 6.63*10^{-27}J[/tex]

Therefore the ratio between them is

[tex]\frac{E_1}{E_2} = \frac{19.89*10^{-17}J}{6.63*10^{-27}J}[/tex]

[tex]\frac{E_1}{E_2} = 3*10^{20}[/tex]

Therefore the energy of 1nm x ray or gamma ray photon is [tex]3*10^{20}[/tex] times more than energy of 10MHz radio photon

The resistivity of a certain semi-metal is 10-3 Ohm-cm. Suppose we would like to prepare a silicon wafer with the same resistivity. Assuming we will use n-type dopants only, what dopant density would we choose

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

  The dopant density is ND   ≈  8.135*10¹²  cm⁻³

Explanation:

The explanation is shown on the second , third ,fourth and fifth uploaded image

An exploration submarine should be able to descend 1200 m down in the ocean. If the ocean density is 1020 kg/m3, what is the maximum pressure on the submarine hull?

Answers

Answer:

11995200 N/m²

Explanation:

Pressure: The is the ratio of force to the surface area in contact. The S.I unit of pressure is N/m².

Generally pressure in fluid can be expressed as

P = ρgh......................... Equation 1

Where P = maximum pressure on the submarine hull, ρ = Density of ocean, h = depth of ocean, g = acceleration due to gravity.

Given: h = 1200 m, ρ = 1020 kg/m³

Constant: g = 9.8 m/s²

Substitute into equation 1

P = 1200(1020)(9.8)

P = 11995200 N/m²

Hence the maximum pressure on the submarine hull = 11995200 N/m²

Final answer:

The maximum pressure on a submarine hull that descends 1200 m in the ocean, with ocean density of 1020 kg/m³, is calculated using the formula P = [tex]P_{o}[/tex] + ρgh. With an atmospheric pressure of 101325 Pa, the final pressure would be 12116485 Pa at that depth.

Explanation:

To calculate the maximum pressure on a submarine hull that can descend 1200 m in the ocean, we use the formula for the pressure exerted by a fluid at a certain depth. The formula is P = [tex]P_{o}[/tex] + ρgh, where P is the pressure at depth, [tex]P_{o}[/tex] is the atmospheric pressure on the surface, ρ (rho) is the density of the fluid, g is the acceleration due to gravity, and h is the depth.

Atmospheric pressure [tex]P_{o}[/tex] is approximately 101325 Pa (or 1 atm). The density of sea water is given as 1020 kg/m³ and the depth is 1200 m. Taking g as 9.8 m/s², the standard acceleration due to gravity, we can substitute the values into the formula:

P = 101325 Pa + (1020 kg/m³)×(9.8 m/s²)×(1200 m)

P = 101325 Pa + 12003360 Pa

P = 12116485 Pa

Therefore, the maximum pressure on the submarine hull at a depth of 1200 m would be 12116485 Pascal (Pa).

Other Questions
Afon read pages in 30 minutes.Find the number of minutes read per page and the number of pages read per minute.I need help im bad at 7th grade math!!!!!!!! What is the present value of a $360 payment in one year when the discount rate is 6 percent? (Round your answer to 2 decimal places.) Simplify .[tex]\sqrt{x} 18[/tex] What was the subject of Craemer v. Washington (1897), Robinson v. United States (1945), and Williams v. New York (1949)? A transverse wave on a long horizontal rope with awavelength of 8 m travels at 2 m/s. At t= 0, aparticular point on the rope has a verticaldisplacement of +A, where A is the amplitude ofthe wave. At what time will the verticaldisplacement of this same point on the rope be -A ? Which of these lists reflects the order in which cell organelles participate in the overall process that produces and transports many kinds of protein though the cell? O Golgi apparatus, vesicles, ribosomes bound to rough endoplasmic reticulum, vesicles O ribosomes bound to rough endoplasmic reticulum, vesicles, Golgi apparatus, vesicles O Golgi apparatus, vesicles, ribosomes bound to rough endoplasmic reticulum O vesicles, Golgi apparatus, ribosomes bound to rough endoplasmic reticulum An electric motor rotating a workshop grinding wheel at a rate of 44.2 rev/min is switched off with a constant deceleration of 2.69 rad/s 2 . How long does it take for the grinding wheel to stop? The element gallium has an atomic weight of 69.7 and consists of two stable isotopes gallium -69 and gallium -71. The isotope gallium -69 has a mass of 68.9 amu and a percent natural abundance of 60.4 %. The isotope gallium -71 has a percent natural abundance of 39.6%. What is the mass of gallium -71? At 12.0 C , a common temperature for household freezers, what is the maximum mass of sorbitol (C6H14O6) you can add to 2.00 kg of pure water and still have the solution freeze? Assume that sorbitol is a molecular solid and does not ionize when it dissolves in water. Some time ago, the nation of Republica opened up its paper market to international trade. Which of the following results of this policy change is consistent with the notion that Republica has a comparative advantage over other countries in producing paper?A. The domestic demand curve for paper shifted to the right as a result of the policy change.B. The price of paper in Republica decreased as a result of the policy change.C. Republica began exporting paper as a result of the policy change. which plane is closer to the base of the airplane tower? explain. The distance for Plane A, to the nearest tenth, is ____ kilometers. The distance for Plane B, to the nearest tenth, is _____ kilometers. help!! PART A: As it is used in paragraph 1, the word thwart most closely means: Jane has always made budgets for herself. She plans her expenses according to her budget. However, despite creating plans, some unforeseen circumstance often puts her off the budget. Which course of action should Jane follow to prepare herself for unforeseen circumstances and stay on a budget?A. follow the plan strictly at any costB. create an emergency fundC. follow the same planD. tweak her financial goalsE. create a new plan similar to the original one In its 2014 McCutcheon v. Federal Election Commission ruling, the Supreme Court held that the aggregate limits on a person's contributions to federal candidates, parties, and political action committees were:_________ 1. Mis amigos Loles, Antonio y Karen (1) preguntan a m si quiero ir a Italia con ellos este verano. 2. Ellos (3) quieren pedir un libro o dos a la profesora de historia del arte. Yo (4) quiero dar a ellos un lbum de fotos muy interesante. El novio de mi hermana es italiano. l tiene una coleccin con dos mil cuatrocientas sesenta y tres fotos de muchas ciudades y museos de su pas. Would focusing on self improvement do more to change the world for the better than attempting to change the world? The Nobel Prize-winning economist Paul Samuelson argued that contrary to the standard interpretation, in certain circumstances the theory of comparative advantage predicts that a rich country might actually be worse off by switching to a free trade regime with a poor nation.a. True.b. False. The core idea that both Franklin Roosevelt new deal and policies from the progressive era shared was what? To stop his uncles constant requests, Jimmy takes out the garbage. This makes him more likely to take out the garbage in the future. Jimmys behavior is being controlled by which of the following types of reinforcement?intermittent positive negative vicarious delayed In the triangle below, what is the sine of 30?