The density of mercury is 13.6 g/cm3 . What volume (in quarts) is occupied by 100. g of Hg? (1 L = 1.06 qt)

Answer:

Explanation:

a ) Speed of radio waves in space = speed of light in space

= 3 x 10⁸ m /s

Time taken = distance / speed

= 8.1 x 10⁷ x 10³ / 3 x 10⁸ s

= 2.7 x 10² s

= 270 s

b )

Distance = speed x time

= 3 x 10⁸ x 1.2 m

= 3.6 x 10⁸ m

= 3.6 x 10⁵ km

Answer:Salt

Explanation:

In chemistry a salt is produced from a neutralization reaction, when an acid react with a base.

HCl(aq) + NaOH (aq) ----> NaCl (aq) + H2O(l)

A salt consists of the positive ion (cation) of an acid and the negative ion (anion) of a base.

H+(aq) + Cl-(aq) + Na+(aq) + OH-(aq) -------> Na+Cl-(aq) + H2O(l)

When the water is evaporated, the negatively charged chlorine ions combine with the positively charged sodium ions to form a solid salt.

An Ionic Compound is a substance formed of crystals of equal numbers of cations and anions held together by ionic bonds. They are typically created when metals transfer electrons to non-metals. Sodium Chloride is a common example.

A substance formed of crystals of equal numbers of cations and anions held together by ionic bonds is called an Ionic Compound. These are usually formed when metals transfer electrons to non-metals, resulting in the creation of ions which are attracted to each other due to their opposite charges. They are known for high melting and boiling points as well as their ability to conduct electricity when dissolved in water or melted. Sodium Chloride, or table salt, is a common example of an ionic compound.

https://brainly.com/question/33500527

#SPJ3

Answer:

The elements are Tin (Sn) and Lead (Pb)

Explanation:

They are 4+ and 2+

For the 2+, this happens because of the loss of the outermost two P electrons and for the 4+, because of the loss of two electrons from the P orbital and another two electrons from the s-orbital.

Answer:

293.99 g

OR

0.293 Kg

Explanation:

Given data:

Lattice energy of Potassium nitrate (KNO3) = -163.8 kcal/mol

Heat of hydration of KNO3 = -155.5 kcal/mol

Heat to absorb by KNO3 = 101kJ

To find:

Mass of KNO3 to dissolve in water = ?

Solution:

Heat of solution = Hydration energy - Lattice energy

                           = -155.5 -(-163.8)

                           = 8.3 kcal/mol

We already know,

1 kcal/mol = 4.184 kJ/mole

Therefore,

= 4.184 kJ/mol x 8.3 kcal/mol

= 34.73 kJ/mol

Now, 34.73 kJ of heat is absorbed when 1 mole of KNO3 is dissolved in water.

For 101 kJ of heat would be

= 101/34.73

= 2.908 moles of KNO3

Molar mass of KNO3 = 101.1 g/mole

Mass of KNO3 = Molar mass x moles

                         = 101.1 g/mole  x  2.908

                         = 293.99 g

                         = 0.293 kg

293.99 g potassium nitrate has to dissolve in water to absorb 101 kJ of heat.     

Final answer:

To absorb 101 kJ of heat, 7.63 grams of potassium nitrate must dissolve in water, calculated based on the lattice energy and heat of hydration provided.

Explanation:

The question asks how much potassium nitrate needs to dissolve in water to absorb 101 kJ of heat, given the lattice energy and heat of hydration for potassium nitrate. First, we convert the given heat into kcal because the energies are provided in kcal/mol: 101 kJ × (1 kcal / 4.184 kJ) = 24.1 kcal. The total heat involved in dissolving potassium nitrate in water can be found by adding the lattice energy to the heat of hydration: -163.8 kcal/mol + (-155.5 kcal/mol) = -319.3 kcal/mol. This value represents the heat released when 1 mole of potassium nitrate dissolves in water.

To find the amount of potassium nitrate that needs to dissolve to absorb 101 kJ (24.1 kcal), we set up a proportion, knowing that -319.3 kcal is released per mole of potassium nitrate dissolved: (1 mole / -319.3 kcal) = (x moles / 24.1 kcal). Solving for x gives x = 24.1 kcal / -319.3 kcal/mol = 0.0755 moles. Finally, to find the mass of potassium nitrate, we multiply the moles by the molar mass of potassium nitrate (KNO3), which is approximately 101.1 g/mol: 0.0755 moles ×101.1 g/mol = 7.63 grams.

Therefore, 7.63 grams of potassium nitrate need to dissolve in water to absorb 101 kJ of heat.

Answer :

'n' specifies  → (B) The energy and average distance from the nucleus.

'l' specifies   → (C) The subshell orbital shape.

'ml' specifies → (A) The orbital orientation.

Explanation :

Principle Quantum Numbers : It describes the size of the orbital. It is represented by n. n = 1,2,3,4....

Azimuthal Quantum Number : It describes the shape of the orbital. It is represented as 'l'. The value of l ranges from 0 to (n-1). For l = 0,1,2,3... the orbitals are s, p, d, f...

Magnetic Quantum Number : It describes the orientation of the orbitals. It is represented as [tex]m_l[/tex]. The value of this quantum number ranges from [tex](-l\text{ to }+l)[/tex]. When l = 2, the value of

Spin Quantum number : It describes the direction of electron spin. This is represented as [tex]m_s[/tex]. The value of this is [tex]+\frac{1}{2}[/tex] for upward spin and [tex]-\frac{1}{2}[/tex] for downward spin.

As per question we conclude that,

'n' specifies  → The energy and average distance from the nucleus.

'l' specifies   → The subshell orbital shape.

'ml' specifies → The orbital orientation.

The Schrödinger wave equation for a hydrogen atom uses three quantum numbers to characterize wave functions, or orbitals, of an electron. The principal quantum number 'n' indicates the energy and average distance from the nucleus, the azimuthal or orbital quantum 'l' represents the shape of the orbital, and the magnetic quantum number 'ml' describes the orientation of the orbital.

The solution of the Schrödinger wave equation for the hydrogen atom leads to the development of wave functions, also known as orbitals, that specify the behavior of the electron. Each of the wave functions or orbitals are defined by three quantum numbers: n, l, and ml.

In summary, the quantum numbers describe the discrete states that an electron can occupy in a hydrogen atom and provide the physical significance for the electron's behavior within the atom based on the Schrödinger equation.

https://brainly.com/question/27152536

#SPJ12

Answer:

c. 0.57 atm

Explanation:

For the equilibrium:

Br₂(g)    +    Cl₂(g)      ⇄    2BrCl (g)

Let construct the ICE table for this reaction.

                            Br₂(g)          +           Cl₂(g)          ⇄           2BrCl (g)

Initial                     0                              0                                  1

Change                 +x                           +x                                - 2x

Final                      x                               x                                1 - 2x

[tex]K_p = 7[/tex]

[tex]K_p= \frac{[BrCl_2]^2}{[Br_2][Cl_2]}[/tex]

[tex]7 = \frac{[1-2x]^2}{[x][x]}[/tex]

[tex]7 = \frac{[1-2x]^2}{[x]^2}[/tex]

[tex]7x^2=(1-2x)(1-2x)[/tex]

[tex]7x^2=1-2x-2x+4x^2[/tex]

[tex]7x^2=1-4x+4x^2[/tex]

[tex]7x^2-4x^2=1-4x[/tex]

[tex]3x^2=1-4x[/tex]

[tex]3x^2+4x-1 = 0[/tex]      ----------(quadratic equation)

using the formula;

[tex]\frac{-b+/-\sqrt{b^2-4ac} }{2a}[/tex]

where ± represent +/-

a =3 ; b = 4 ; c = -1

[tex]\frac{-4+/-\sqrt{4^2-4(3)(1)} }{2*3}[/tex]

[tex]\frac{-4+/-\sqrt{16+12} }{6}[/tex]

[tex]\frac{-4+/-\sqrt{28} }{6}[/tex]

[tex]\frac{-4+\sqrt{28} }{6}[/tex]  or [tex]\frac{-4-\sqrt{28} }{6}[/tex]

[tex]\frac{-4+5.292}{6}[/tex] or [tex]\frac{-4-5.292}{6}[/tex]

x = 0.215 or -1.549

So, we chose the one with a positive integer which is = 0.215

BrCl = 1 - 2(x)

BrCl = 1 - 2(0.215)

BrCl = 1 - 0.43

BrCl = 0.57 atm

∴ the final (equilibrium) pressure of BrCl = 0.57 atm

The final equilibrium pressure of the reaction is 0.57 atm

Data;

Let's write the equation of reaction for this

          Br2(g) + Cl2(g) ⇌ 2 BrCl(g)

initial                                   1

final     x              x           (1 - 2x)

The equilibrium pressure (Kp) is given as

[tex]kp = \frac{[BrCl]^2}{Br_2][Cl_2]} \\7 = \frac{(1-2x)^2}{x^2} \\7x^2 = 1 + 4x^2 - 4x\\7x^2 - 4x^2 + 4x - 1 = 0\\3x^2 + 4x - 1 = 0[/tex]

We can solve the above quadratic equation to find the value of x

x = 0.215

Let's substitute this into the concentration of BrCl

[tex][BrCl] = 1-2x = 1 - 2(0.215)= 1 - 0.43 = 0.57[/tex]

The final equilibrium pressure of the reaction is 0.57 atm

Learn more on equilibrium pressure constant here;

https://brainly.com/question/8733061

Answer:

[tex]t=0.012\ min[/tex]

Explanation:

Using integrated rate law for first order kinetics as:

[tex][A_t]=[A_0]e^{-kt}[/tex]

Where,  

[tex][A_t][/tex] is the concentration at time t

[tex][A_0][/tex] is the initial concentration

Given that:

The rate constant, k = 0.0642 s⁻¹

Initial concentration [tex][A_0][/tex] = 0.502 mol/L

Final concentration [tex][A_t][/tex] = 0.479 mol/L

Time = ?

Applying in the above equation, we get that:-

[tex]0.479=0.502e^{-0.0642\times t}[/tex]

[tex]e^{-0.0642t}=\frac{0.479}{0.502}[/tex]

[tex]t=-\frac{\ln \left(\frac{0.479}{0.502}\right)}{0.0642}[/tex]

[tex]t=0.731\ sec[/tex]

Also, 1 sec = 1/60 min

So, [tex]t=0.012\ min[/tex]

Final answer:

Using the first-order rate law equation and the provided rate constant, it will take approximately 0.012 minutes (rounded to three decimal places) until the concentration of the compound decreases from 0.502 mol/L to 0.479 mol/L.

Explanation:

To find out how long it will take until 0.479 mol/L of the compound is left, given that the initial concentration is 0.502 mol/L and the rate constant is 0.0642 sec⁻¹, we need to use the first-order rate law equation, which is given by:

ln([A]t/[A]0) = -kt

Where: t is the time

Plugging in the values we have:

ln(0.479/0.502) = -0.0642 * t

The calculation would proceed as follows:

ln(0.479/0.502) = -0.0642 * t

ln(0.9545) = -0.0642 * t

-0.0465 = -0.0642 * t

t = 0.0465 / 0.0642

t ≈ 0.724 sec

To convert seconds to minutes, divide by 60:

t ≈ 0.724 sec / 60

t ≈ 0.012 min

Rounding up to three decimal places, the time t will be 0.012 min.

Answer: Ms. Scarlet is the murderer.

Explanation: Each color has a wavelength band, some visible to the human eye (visible spectrum), some for the other animals. In this game of "Clue", the color are yellow (Col. Mustard), violet (Prof. Plum), green (Mr. Green), blue (Ms. Peacock) and red (Ms. Scarlet). Using the device and knowing each band, it's determined that at the time of murder, Mr. Green was in the dining room, because green light has the wavelength between 495 to 570nm; Prof. Plum was in the library, due to violet's light has the shortest wavelength; Col. Mustard and Ms. Peacock were either in the lounge or in the study, because of their color's light wavelength measurement. So, the person responsible for the murderer was Ms. Scarlet, as the other devices in the other places didn't register a higher wavelength, which is compatible to the red light.

According to the spectrometer readings, Ms. Peacock is the murderer of Ms. White in the conservatory, as the reflected colors in the other rooms correspond to the other characters' colors and leave only Ms. Peacock unaccounted for at the crime scene.

To determine who killed Ms. White in the conservatory in a game of "Clue" using a spectrometer, we need to match the color associated with the wavelength of light reflected in each room with the corresponding suspect's color. The dining room spectrometer recorded a reflection at 520 nm, which corresponds to green.

Since Mr. Green reflects green and that is his character color, he is in the dining room. The lounge and study recorded reflections of lower frequencies i.e., longer wavelengths than green, which suggest colors towards the red end of the spectrum, likely placing Ms. Scarlet (red) and Prof. Plum (purple) in those rooms.

The library recorded a reflection of the shortest possible wavelength, meaning violet, which is typically associated with Prof. Plum; however, since he is presumed to be in a room with a longer wavelength, that leaves Col. Mustard (who wears yellow) as the suspect in the library because yellow requires the absorption of wavelengths at the violet end of the spectrum.

Therefore, Ms. Peacock, whose color is blue and wasn't indicated in the other rooms, must have been in the conservatory and is determined to be the murderer according to the spectrometer readings.

Answer:

Brackett Series (n = 4)

Explanation:

The least energetic line of Hydrogen atom lies in Brackett Series when n = 4 because these are least energetic, have longer wavelengths and lies in Infrared region of spectrum.  No traces of Pfund series are formed by H=atoms.

Answer: 999851 Joules of energy is needed to evaporate the sweat that is produced

Explanation:

Latent heat of vaporization is the amount of heat required to convert 1 gram of liquid water to gaseous form at its boiling point.

Given:  The heat of vaporization for water is 2257 J/g.

Thus if for 1 g , the heat required is = 2257 J

For 443 g , heat required is =[tex]\frac{2257}{1}\times 443=999851J[/tex]

Thus 999851 Joules of energy is needed to evaporate the sweat that is produced

To calculate the energy required to evaporate the sweat produced during exercise, we multiply the mass of the sweat (443 g) by the heat of vaporization for water (2257 J/g). The result is approximately 999,791 Joules.

To calculate the amount of energy required to evaporate the sweat that an athlete produces during exercise, we can use the formula energy = mass × heat of vaporization. Given that the heat of vaporization for water is 2257 J/g and the average sweat loss is approximately 443 g, we can substitute these values into the formula: energy = 443 g × 2257 J/g = 999791 J. So, on average, an athlete needs about 999,791 Joules of energy to evaporate the sweat produced in an hour of exercise.

https://brainly.com/question/34153010

#SPJ3

Answer: True

Explanation: the angle of incident Ray equals the angle of the reflected Ray.

Answer:

(a) Which hazards are associated with copper(II) sulfate?

(b) What actions should you take if you spill copper(II) sulfate solution on yourself?

(c) What clothing is appropriate for the laboratory?

Explanation:

Copper sulfate (ii) is a toxic compound by ingestion. Irritant in prolonged skin contact.

In case of skin contact, contaminated clothing and shoes should be removed, wash the affected areas with soap and large amounts of water. Seek medical assistance.

The shoe is recommended that this be completely closed, since if any substance falls do not burn the feet, and comfortable to perform the practice in the best way.

The clothes to be used in a laboratory should cover as much skin as possible, in addition it is necessary to use a cotton lab coat, long sleeve and that reaches the knees.

Copper II sulfate is a toxic irritant, if ever your skin comes in contact with it flush the affected area with water.

In labs, there are many chemicals that can harm the student while haphazardly handling them.

For example - Copper II sulfate is a toxic irritant, if ever your skin comes in contact with it flush the affected area with water.

The students should wear full sleeve shirts, overlapping with pants and shoes that cover the ankle and toe.

Therefore, Copper II sulfate is a toxic irritant, if ever your skin comes in contact with it flush the affected area with water.

Learn more about Copper II sulfate:

https://brainly.com/question/5001203

Explanation:

The point of difference between metals and non metals are as follows -

Metals -

Metals are malleable in nature , so can be beaten into thin sheets .

Non - metals -

Non - metals are brittle in nature , so when beaten , it can be powdered .

Metals -

Metals have one to three electrons in the very outer most shell .

Non - metals -  

Non - metals have four to eight electrons in the very outer most shell .

Metals -

Metals are lustrous in appearance .

Non - metals -

Non - metals re not lustrous in appearance .

To calculate the concentration of the NaOH solution, convert the volume to grams and calculate the moles of NaOH. Then, use the moles and total volume to find the concentration.

To find the concentration of the NaOH solution, we need to calculate the moles of NaOH present in the 3.03 mL volume. First, we convert the volume to grams using the density of the solution: 3.03 mL × 1.53 g/mL = 4.6419 g

Next, we calculate the moles of NaOH:

Moles of NaOH = \dfrac{4.6419 g}{40.00 g/mol} = 0.1160 mol

Finally, we use the moles of NaOH and the total volume of the solution (500 mL) to find the concentration:

Concentration = \dfrac{0.1160 mol}{0.5000 L} = 0.2320 M

Final answer:

The concentration of the diluted NaOH solution after measuring 3.03 mL of a 50% NaOH solution, with a density of 1.53 g/mL, and diluting to 500 mL total volume is 0.1159 M.

Explanation:

To calculate the concentration of the diluted NaOH solution, we need to determine the amount of NaOH in the initial 3.03 mL of 50% solution and then find the molarity after dilution to 500 mL. The density of the solution is given as 1.53 g/mL, so the mass of the 3.03 mL solution is:

mass = volume × density = 3.03 mL × 1.53 g/mL = 4.6359 g

Since the solution is 50% by weight, the mass of NaOH is:

mass of NaOH = 0.50 × 4.6359 g = 2.3180 g

The molar mass of NaOH is approximately 40.00 g/mol, so the number of moles of NaOH in the original solution is:

moles of NaOH = mass / molar mass = 2.3180 g / 40.00 g/mol = 0.05795 mol

After dilution to 500 mL, the molarity (M) is calculated as follows:

Molarity = moles / volume (L) = 0.05795 mol / 0.50 L = 0.1159 M

Therefore, the concentration of the diluted NaOH solution is 0.1159 M.

The ground-state electron configurations for Sc3+, Cr3+, Cu, and Au are [Ar], [Ar]18 3d3, [Ar]18 3d10 4s1, and [Xe]6s1 4f14 5d10 respectively. Electrons are removed from the 4s orbital first and then from 3d in transition metals.

The ground-state electron configurations of the transition metal ions are expressed as follows:

It's essential to remember that for transition metals, electrons are removed from the 4s orbital first and then from the 3d orbital.

https://brainly.com/question/31812229

#SPJ3

The ground-state electron configurations for Sc3+, Cr3+, Cu, and Au ions are [Ar], [Ar] 3d3, [Ar] 3d10, and [Xe] 4f14 5d9, respectively, with the higher energy electrons being removed first to form the ions.

To write the ground-state electron configurations of the given transition metal ions, we must understand how electrons are removed when forming an ion. For transition metals, electrons are removed from the s orbital before the d orbital. Now let's determine the electron configurations:

Answer:

11.02 % of an isotope will be left after 45 seconds.

Explanation:

[tex]N=N_o\times e^{-\lambda t}\\\\\lambda =\frac{0.693}{t_{\frac{1}{2}}}[/tex]

where,

[tex]N_o[/tex] = initial mass of isotope

N = mass of the parent isotope left after the time, (t)

[tex]t_{\frac{1}{2}}[/tex] = half life of the isotope

[tex]\lambda[/tex] = rate constant

We have :

Mass of Beryllium-11 radioactive isotope= [tex]N_o=100[/tex]

Mass of Beryllium-11 radioactive isotope after 45 seconds = [tex]N=?[/tex]

t = 45 s

[tex]\lambda[/tex] = rate constant  = [tex]4.9 \% s^{-1}=0.049 s^{-1}[/tex]

[tex]N=N_o\times e^{-(\lambda \times t}[/tex]

Now put all the given values in this formula, we get

[tex]N=100\times e^{-0.049 s^{-1}\ties 45 s}[/tex]

[tex]N=11.02 g[/tex]

Percentage of isotope left :

[tex]\frac{N}{N_o}\times 100=\frac{11.02 g}{100 g}\times 100=11.02\%[/tex]

11.02 % of an isotope will be left after 45 seconds.

Final answer:

To calculate the remaining amount of Beryllium-11 after 45 seconds based on a 4.9% decay rate per second, the exponential decay formula is used. The remaining percentage is found by the expression 100 × (1 - 0.049) ^ 45.

Explanation:

The question asks how much of the radioactive isotope Beryllium-11 would be left after 45 seconds if it decays at a rate of 4.9% per second starting from 100%. To find the remaining amount, we can use the exponential decay formula, which is:

Remaining amount = Initial amount × (1 - decay rate) ^ time

In this case, the initial amount is 100%, decay rate is 0.049 (4.9% as a decimal), and time is 45 seconds. Plugging the values into the formula gives us:

Remaining amount = 100 × (1 - 0.049) ^ 45

Calculating this, we get:

Remaining amount = 100 × (0.951) ^ 45

Utilizing a calculator for the exponential part, we'll find the percentage of Beryllium-11 left after 45 seconds.

Answer: The annual emission rate of SO2 is 1.08 × [tex]10^{7}[/tex] kg/yr

Explanation:

i.e., 4.4/100 × 8.02 = 0.353 kg/s. Which is equivalent to the rate at which the sulphur is been burnt.

  = 97.20/100 × 0.353 kg/s.

  = 0.343 kg/s.

1 kg/s = 1 kg/s × (60 × 60 × 24 × 365) s/yr

1 kg/s = 31536000 kg/yr

     = 10816848 kg/yr

     = 1.08 × 10^7 kg/yryr.

Answer: Precision means that measurements are close to each other . Accuracy means that measurements are close to accepted value

Explanation:

Precision refers to the closeness of two or more measurements to each other.  

For Example: If we weigh a given substance five times and you get 5.0 kg each time. Then the measurement is very precise.

Accuracy refers to the closeness of a measured value to a standard or known value.

For Example: If the mass of a substance is 5.0 kg and one person weighed 4.9 kg and another person weighed 3.9 kg. Then, the weight measured by first person is more accurate.

Thus Precision means that measurements are close to each other . Accuracy means that measurements are close to accepted value.

Precision in measurements means the values are close to each other, indicating consistency or reproducibility. Accuracy describes how close a measurement is to the correct or true value. For the best scientific outcomes, both high precision and high accuracy are desired.

When discussing measurements in scientific terms, precision and accuracy are two critical concepts that often get confused. Precision means that measurements are close to each other. It refers to the consistency of repeated measurements. On the other hand, accuracy means that measurements are close to an accepted value, which is the correct or true value of the quantity being measured.

For example, in archery, if several arrows hit close to each other but not near the target's center, the shots are precise but not accurate. Conversely, if an arrow hits the center of the target, it's considered accurate, especially if repeated shots hit the same spot, which would show both accuracy and precision.

The aim in scientific measurement is to achieve both high precision and high accuracy, thereby ensuring that measurements not only agree with each other but also with the true or accepted value. However, a measurement instrument can sometimes have one without the other. It's possible to have a set of measurements that are very close to each other (precise) but far from the correct value (inaccurate), or to have a measurement that is very close to the correct value (accurate) but when repeated fluctuates significantly (imprecise).

https://brainly.com/question/14690234

#SPJ6

Answer:

E = 1.33 MeV = 2.13 x [tex]10^{-13}[/tex] J

v = wavelength = E / h = 2.13 x [tex]10^{-13}[/tex] / 6.626 x [tex]10^{-34}[/tex] = 3.2 x [tex]10^{20}[/tex] m

f = frequency = c / 3.2 x [tex]10^{20}[/tex] m = 3 x [tex]10^{8}[/tex] / 3.2 x [tex]10^{20}[/tex] = 9.375 x [tex]10^{-13}[/tex] Hz

Answer :

(a) n = 4, l = 2

At l = 2,  [tex]m_l=+2,+1,0,-1,-2[/tex]

Number of orbitals = 5

(b) n = 5, l = 1

At l = 1,  [tex]m_l=+1,0,-1[/tex]

Number of orbitals = 3

(c) n = 6, l = 3

At l = 3,  [tex]m_l=+3,+2,+1,0,-1,-2,-3[/tex]

Number of orbitals = 7

Explanation:

There are 4 quantum numbers :

Principle Quantum Numbers : It describes the size of the orbital. It is represented by n. n = 1,2,3,4....

Azimuthal Quantum Number : It describes the shape of the orbital. It is represented as 'l'. The value of l ranges from 0 to (n-1). For l = 0,1,2,3... the orbitals are s, p, d, f...

Magnetic Quantum Number : It describes the orientation of the orbitals. It is represented as m_l. The value of this quantum number ranges from [tex](-l\text{ to }+l)[/tex]. When l = 2, the value of [tex]m_l[/tex] will be -2, -1, 0, +1, +2.

Spin Quantum number : It describes the direction of electron spin. This is represented as [tex]m_s[/tex]The value of this is [tex]+\frac{1}{2}[/tex] for upward spin and [tex]-\frac{1}{2}[/tex] for downward spin.

(a) n = 4, l = 2

At l = 2,  [tex]m_l=+2,+1,0,-1,-2[/tex]

Number of orbitals = 5

(b) n = 5, l = 1

At l = 1,  [tex]m_l=+1,0,-1[/tex]

Number of orbitals = 3

(c) n = 6, l = 3

At l = 3,  [tex]m_l=+3,+2,+1,0,-1,-2,-3[/tex]

Number of orbitals = 7

Answer:

16.79 grams of dinitrogen monoxide are present after 31.3 g of calcium nitrate and 38.7 g of ammonium fluoride react completely. And calcium nitrate is a limiting reactant. Explanation:

[tex]Ca(NO_3)_2(aq)+2NH_4F(aq)\rightarrow CaF_2(aq)+2N_2O(g)+4H_2O(g)[/tex]

Moles of calcium nitrate = [tex]\frac{31.3 g}{164 g/mol}=0.1908 mol[/tex]

Moles of ammonium fluoride = [tex]\frac{38.7 g}{37 g/mol}=1.046 mol[/tex]

According to reaction , 2 moles of ammonium fluoride reacts with 1 mole of calcium nitrate.

Then 1.046 moles of ammonium fluoride will react with :

[tex]\frac{1}{2}\times 1.046 mol=0.523 mol[/tex] calcium nitarte .

This means that ammonium fluoride is in excess amount and calcium nitrate is in limiting amount.

Hence, calcium nitrate is a limiting reactant.

So, amount of dinitrogen monoxide will depend upon moles of calcium nitrate.

So, according to reaction , 1 mole of calcium nitarte gives 2 moles of dinitrogen monoxide gas .

Then 0.1908 moles of calcium nitrate will give:

[tex]\frac{2}{1}\times 0.1908 mol=0.3816 mol[/tex]of dinitrogen monoxide gas.

Mass of 0.03816 moles of dinitrogen monoxide gas:

0.03816 mol × 44 g/mol = 16.79 g

16.79 grams of dinitrogen monoxide are present after 31.3 g of calcium nitrate and 38.7 g of ammonium fluoride react completely. And calcium nitrate is a limiting reactant.

After the reaction is complete the mass of dinitrogen monoxide N2O 8.39 grams.

let's follow these steps.

Step 1. Write the balanced chemical equation.

The reaction given is between calcium nitrate [tex]\( \text{Ca(NO}_3\text{)}_2 \)[/tex] and ammonium fluoride [tex]\( \text{NH}_4\text{F} \)[/tex], producing calcium fluoride [tex]\( \text{CaF}_2 \),[/tex] dinitrogen monoxide nitrous oxide, [tex]\ \text{N}_2\text{O} \)[/tex], and water vapor [tex]\( \text{H}_2\text{O} \)[/tex]

The balanced chemical equation is.

[tex]\[ \text{Ca(NO}_3\text{)}_2 + 2 \text{NH}_4\text{F} \[/tex] right arrow [tex]\text{CaF}_2 + \text{N}_2\text{O} + 4 \text{H}_2\text{O} \][/tex]

Step 2. Calculate the molar masses.

- Molar mass of. [tex]\( \text{Ca(NO}_3\text{)}_2 \)[/tex]

[tex]\[ \text{Ca}[/tex] = [tex]40.08 \, \text{g/mol} \][/tex]

[tex]\[ \text{N} = 14.01 \, \text{g/mol} \][/tex]

[tex]\[ \text{O} = 16.00 \, \text{g/mol} \][/tex]

[tex]\[ \text{Molar mass of } \text{Ca(NO}_3\text{)}_2 = 40.08 + 2 \cdot (14.01 + 3 \cdot 16.00) = 164.10 \, \text{g/mol} \][/tex]

- Molar mass of [tex]\( \text{NH}_4\text{F} \):[/tex]

[tex]\[ \text{N} = 14.01 \, \text{g/mol} \][/tex]

[tex]\[ \text{H} = 1.01 \, \text{g/mol} \][/tex]

[tex]\[ \text{F} = 19.00 \, \text{g/mol} \][/tex]

[tex]\[ \text{Molar mass of } \text{NH}_4\text{F} = 14.01 + 4 \cdot 1.01 + 19.00 = 37.05 \, \text{g/mol} \][/tex]

- Molar mass of [tex]\( \text{N}_2\text{O} \)[/tex].

[tex]\[ \text{N} = 14.01 \, \text{g/mol} \][/tex]

[tex]\[ \text{O} = 16.00 \, \text{g/mol} \][/tex]

[tex]\[ \text{Molar mass of } \text{N}_2\text{O} = 2 \cdot 14.01 + 16.00 = 44.02 \, \text{g/mol} \][/tex]

Step 3. Determine the limiting reactant.

Calculate the number of moles for each reactant.

- Moles of[tex]\( \text{Ca(NO}_3\text{)}_2 \).[/tex]

[tex]\[ \text{Moles} = \frac{31.3 \, \text{g}}{164.10 \, \text{g/mol}} \approx 0.1908 \, \text{mol} \][/tex]

- Moles of[tex]\( \text{NH}_4\text{F} \):[/tex]

[tex]\[ \text{Moles} = \frac{38.7 \, \text{g}}{37.05 \, \text{g/mol}} \approx 1.0451 \, \text{mol} \][/tex]

According to the balanced equation,[tex]\( \text{Ca(NO}_3\text{)}_2 \) and \( \text{NH}_4\text{F} \)[/tex] react in a 1:2 molar ratio. Therefore, [tex]\( \text{Ca(NO}_3\text{)}_2 \)[/tex] is the limiting reactant because it produces fewer moles of products compared to [tex]\( \text{NH}_4\text{F} \).[/tex]

Step 4. Calculate the mass of [tex]\( \text{N}_2\text{O} \)[/tex] produced.

From the balanced equation,[tex]\( 1 \) mole of \( \text{Ca(NO}_3\text{)}_2 \) produces \( 1 \) mole of \( \text{N}_2\text{O} \).[/tex]

- Moles of [tex]\( \text{N}_2\text{O} \)[/tex] produced.

[tex]\[ \text{Moles} = 0.1908 \, \text{mol} \][/tex]

- Mass of [tex]\( \text{N}_2\text{O} \).[/tex]

[tex]\[ \text{Mass} = \text{Moles} \times \text{Molar mass of } \text{N}_2\text{O} \][/tex]

[tex]\[ \text{Mass} = 0.1908 \, \text{mol} \times 44.02 \, \text{g/mol} \][/tex]

[tex]\[ \text{Mass} = 8.39 \, \text{g} \][/tex]

Answer:

The volume of the gas is 8.37 L

Explanation:

Step 1: Data given

Temperature = 12.0 °C

Moles sulfur hexafluoride gas = 358 mmol = 0.358 mol

Pressure = 1 atm

Step 2: Calculate volume

p*V = n*R*T

⇒ with p = the pressure = 1 atm

⇒ with V = The volume = TO BE DETERMINED

⇒ with n = moles of sulfur hexafluoride gas

⇒ with R = the gas constanr = 0.08206 L*atm/mol*K

⇒ with T = The temperature = 12.0 °C = 285 K

V = (n*R*T)/p

V = ( 0.358 * 0.08206 * 285) / 1

V = 8.37 L

The volume of the gas is 8.37 L

Final answer:

Using the ideal gas law, we calculate the volume of sulfur hexafluoride gas at 12.0 °C and 1 atm pressure as 8.378 L, after converting the given moles and temperature to the appropriate units.

Explanation:

To calculate the volume of sulfur hexafluoride gas evolved at 12.0 °C and 1 atm pressure, we can use the ideal gas law, which relates the number of moles (n) of a gas to its volume (V) at a specific temperature (T) and pressure (P): PV = nRT, where R is the ideal gas constant. Here, we know n = 358 mmol, which we convert to 0.358 mol. The temperature must be in Kelvin; therefore, we add 273.15 to the Celsius temperature: 12.0 + 273.15 = 285.15 K. Using R = 0.0821 L·atm/mol·K, we can solve for V.

Calculation: V = nRT/P
V = (0.358 mol)(0.0821 L·atm/mol·K)(285.15 K) / (1 atm)
V = 8.378 L (rounded to three significant digits)

The volume of sulfur hexafluoride gas collected at these conditions is 8.378 L.

Answer:

A. 47 protons and 58 neutrons, 47 protons and 64 neutrons

B. 47 electrons

Explanation:

While it is possible for two isotopes of a particular element to have different atomic masses, it is. It is impossible for the number of protons or the atomic number of the isotopes to be different.

To answer this question properly, we would be needing the proton number or the atomic number of silver. The atomic number of silver is 47. Let’s say the isotopes are A and B respectively.

The number of protons in the same is equal which is 47. The number of neutrons is different and can be obtained by subtracting the number of protons from the mass number.

For A: neutrons = 105 - 47 = 58

For B: neutrons = 111 - 47 = 64

Since Both are electrically neutral, the number of orbiting electrons is also equals the number of protons which is equal to 47.

Silver (Ag) has 47 protons. Its isotopes Ag-105 and Ag-111 have 58 and 64 neutrons respectively. In neutral conditions both isotopes have 47 electrons.

The atomic number for silver (Ag) is 47, which means it has 47 protons. Isotopes of a particular element have the same number of protons but different number of neutrons. Isotope Ag-105 will have 47 protons and 105 - 47 = 58 neutrons, and Isotope Ag-111 will have 47 protons and 111 - 47 = 64 neutrons. In a state of electrical neutrality (no charge), an atom will have the same number of protons and electrons. Thus, both Isotopes Ag-105 and Ag-111 will each have 47 electrons.

https://brainly.com/question/37561413

#SPJ3

Answer:

The answer to this question is

The lattice energy of the salt AB is ≅ -2600 kJ/mol rounded to three significant figures

Explanation:

To solve this we list out the known variables and the required unkown, then we look for the appropriate relation between the known and the unknown thus

Lattice energy of KI = -649 kJ/mol

Latice energy of salt AB = unknown

Charge on A²⁺ =+2

Charge on B²⁻ = -2

radius of A²⁺ = radius of K⁺

radius of B²⁻ = radius  of I⁻

the Born-Lande equation for lattice energies is as follows

[tex]E=-\frac{N_{A} Mz^{+}z^{-} e^{2} }{4\pi e_{0} r_{0} } (1-\frac{1}{n})[/tex]

[tex]E=-\frac{N_{A} M e^{2} }{4\pi e_{0} } (1-\frac{1}{n})\frac{|z|^{+}|z|^{-}}{r_{0}}[/tex]

Where to the above question, the following terms are important

z+ =  positive ion charge

z− = negative ion charge

r₀ → distance between the positive and the negative ions;

Taking all variables of KI and AB as identical we have.

[tex]E=-\frac{N_{A} M e^{2} }{4\pi e_{0} } (1-\frac{1}{n})\frac{|z|^{+}|z|^{-}}{r_{0}}[/tex]

[tex]E=CONSTANT\frac{|z|^{+}|z|^{-}}{r_{0}}[/tex]

Where radius of A²⁺ = radius of K⁺ and

radius of B²⁻ = radius  of I⁻ = r₀

we have

[tex]E_{AB} = E_{KI} (|z|^{+} |z|^{-} )[/tex]

As for AB z⁺ = +2 and z⁻ = -2 we have

[tex]E_{AB} = E_{KI} (|+2|^{+} |-2|^{-} ) = 4E_{KI}[/tex]

= 4 ×(-649 kJ/mol) = -2596 kJ/mol

[tex]E_{AB}[/tex] ≅ -2600 kJ/mol rounded to three significant figures

The lattice energy of [tex]AB[/tex][tex]=-2596 \ kJ/mol.[/tex]

[tex]\Delta H_{Lattice}=\frac{C\left ( z^{+} \right )\left ( z^{-} \right )}{R_{o}}[/tex]

where,

c=constant

[tex]( z^{+} \right) )\left, ( z^{-} \right )}[/tex]= Charges on ions.

[tex]{R_{o}}[/tex]= Interionic distance (radius of cation+anion).

From the lattice energy formula, we know that lattice energy is directly proportional to the charge of the ions and inversely proportional to the radius of the ions.

In the given question charge of the ions doubled so lattice energy will be increased four-fold.

The lattice energy of AB[tex]=Lattice \ energy \ of \ kl\times4[/tex]

                                       [tex]=-649\times4[/tex]

The lattice energy of [tex]AB[/tex][tex]=-2596 \ kJ/mol.[/tex]

Learn more: https://brainly.com/question/8192099

Answer:

D

Explanation: In order to separate liquids with similar boiling points,theoretical plates are the ones that must be maximized because two liquids would be at equilibrium with all properties being the same

To separate liquids with similar boiling points effectively, one needs to maximize the number of theoretical plates in the distillation process. Each theoretical plate represents a vaporization-condensation cycle, refining the separation and increasing the purity of the distillate.

The key to separating liquids with similar boiling points is to maximize the number of theoretical plates. Theoretical plates are a concept used to describe the efficiency of the distillation process. Each theoretical plate represents a single vaporization-condensation cycle, where the composition of the vapor becomes richer in the more volatile component. For compounds with boiling points close to each other, multiple theoretical plates are needed to achieve high purity in the distillation product. The greater the number of theoretical plates in a distillation column, the more refined the separation process can be, allowing for a more effective separation of components with similar boiling points.

For example, if we distill a mixture with components having a small difference in boiling points, with enough theoretical plates, the more volatile component vaporizes first and, upon condensation, can be collected separately from the less volatile component. Using Raoult's law, we can predict the composition of the vapor and liquid at each stage and design the distillation process accordingly to optimize the number of theoretical plates and, in turn, the purity of the distillate.

Answer:

The average pressure in the container due to these 75 gas molecules is [tex]P=9.72 \times 10^{-16} Pa[/tex]

Explanation:

Here Pressure in a container is given as

[tex]P=\frac{1}{3} \rho <u^2>[/tex]

Here

                                         [tex]\rho =\frac{mass}{Volume of container}[/tex]

        Here

                mass is to be calculated for 75 gas phase molecules as

                      [tex]m=n_{molecules} \times \frac{1 mol}{6.022 \times 10^{23} molecules} \times \frac{32 g/mol}{1 mol}\\m=75 \times \frac{1 mol}{6.022 \times 10^{23} molecules} \times \frac{32 g/mol}{1 mol}\\m=3.98 \times 10^{-21} g[/tex]

              Volume of container is 0.5 lts

     So density is given as

                         [tex]\rho =\frac{mass}{Volume of container}\\\rho =\frac{3.98 \times 10^{-21} \times 10^{-3} kg}{0.5 \times 10^{-3} m^3}\\\rho =7.97 \times 10^{-21}\, kg/m^3[/tex]

                                        [tex]<u^2>=RMS^2[/tex]

      Here RMS is the Root Mean Square speed given as 605 m/s so

                                      [tex]<u^2>=RMS^2\\<u^2>=(605)^2\\<u^2>=366025[/tex]

Substituting the values in the equation and solving

[tex]P=\frac{1}{3} \rho <u^2>\\P=\frac{1}{3} \times 7.97 \times 10^{-21} \times 366025\\P=9.72 \times 10^{-16} Pa[/tex]

So the average pressure in the container due to these 75 gas molecules is [tex]P=9.72 \times 10^{-16} Pa[/tex]

Answer:

(a) Rb

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^65s^1[/tex]

(b) Ge

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^2[/tex]

(c) Ar

[tex]1s^22s^22p^63s^23p^6[/tex]

Explanation:

(a) Rb

Atomic number = 37

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^65s^1[/tex]

(b) Ge

Atomic number = 32

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^2[/tex]

(c) Ar

Atomic number- 18

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^6[/tex]

Answer:

Here's how I would do it.

Explanation:

A Lewis structure shows the valence electrons surrounding the atoms.

1. Identify the central atoms

The central atoms are the least electronegative atoms (C).

I chose as my central atoms a chain of four C atoms: C-C-C-C

I stuck the most electronegative atom (O) at the end of the chain:

C-C-C-C-O

2. Complete the structure

The hydrogen atoms must be terminal. Add enough to give every atom an octet.

You should get a structure like the one below

The Lewis structure for an isomer of C3H8O (like propanol) represents the atomic structure of the compound, including each atom and its valence electrons. Bonds are formed from the valence electrons and arranged around the carbon atoms enabling one to visualize the molecular structure.

The Lewis structure for the isomer of C3H8O (propanol as an example) is a visual representation of the compound's atomic structure. It entails representing each atom and its valence electrons. By arranging the atoms in a molecule, we can then place the bonding and lone pair electrons. In propanol, the three carbon (C) atoms are aligned with one end bonded to a hydrogen (H) atom and the other end to an oxygen (O) atom. The oxygen atom is then also bonded to a hydrogen atom.

C-C-C-O-H

The remaining hydrogen atoms are evenly distributed around the carbon atoms and are bound to the carbon atoms. As a result, each carbon atom forms four bonds, oxygen forms two bonds and bears two lone pairs, and each hydrogen atom forms a single bond.

https://brainly.com/question/32193256

#SPJ11

Oxygen has 2 inner electrons, 6 outer electrons, and 6 valence electrons. Tin has 40 inner electrons, 10 outer electrons, and 10 valence electrons. Calcium has 18 inner electrons, 2 outer electrons, and 2 valence electrons. Iron has 18 inner electrons, 8 outer electrons, and 8 valence electrons. Selenium has 26 inner electrons, 6 outer electrons, and 6 valence electrons.

Let's determine the number of inner, outer, and valence electrons for each element:

https://brainly.com/question/37566080

#SPJ12

The number of electrons in an atom can be determined by the electron configuration. For example, Oxygen has 2 inner, 6 outer, and 6 valence electrons while Tin has 50 inner, 14 outer, and 4 valence electrons.

The electron configuration can be used to determine the number of inner, outer, and valence electrons in an atom.

https://brainly.com/question/29157546

#SPJ2

Answer:

5g ($120)

Explanation:

The amount of chemical needed for assay is 3 ml of 250 mM solution of a chemical

Molarity (M) = number of moles / volume in L

number of mole = M × volume in L

M of the chemical = 250 mM = 250 / 1000 = 0.25 M

number of moles = 0.25 × ( 3 / 1000) in L = 0.00075 m

mass of the chemical needed = 0.00075 × molar mass = 0.00075 × 156 = 0.117 g for each assay.

mass needed for 40 assay = 40 × 0.117 = 4.68 g

It is therefore wise for him to buy the 5 g ( $ 120), though the 10 g and 25 g yields better prices per gram, they much more than what he needed for the assay.