Suppose that 96% of bolts and 91% of nails meet specifications. One bolt and one nail are chosen independently. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part.

What is the probability that at least one of them meets specifications? (Round the final answer to four decimal places.)

The probability that at least one of them meets specifications is_______

Answers

Answer 1

Answer:

0.9964 is the probability  that at least one of them meets specifications.

Step-by-step explanation:

We are given the following in the question:

B: Bolts meet the specification

N: Nails meet the specification

P(B) = 96% = 0.96

P(N) = 91% = 0.91

One bolt and one nail are chosen independently.

Thus, we can write

[tex]P(B\cap N) = P(B) \times P(N) = 0.96\times 0.91 = 0.8736[/tex]

We have to find the probability that at least one of them meets specifications.

[tex]P(B\cup N) = P(B) + P(N) -P(B\cap N)\\P(B\cup N) =0.96 + 0.91-0.8736\\P(B\cup N) =0.9964[/tex]

0.9964 is the probability  that at least one of them meets specifications.


Related Questions

For each random variable, state whether the random variable should be modeled with a Binomial distribution or a Poisson distribution. Explain your reasoning. State the parameter values that describe the distribution and give the probability mass function.

Random Variable 1. A quality measurement for cabinet manufacturers is whether a drawer slides open and shut easily. Historically, 2% of drawers fail the easy slide test. A manufacturer samples 10 drawers from a batch. Assuming the chance of failure is independent between drawers, what type of distribution could be used to model the number of failed drawers from the sample of 10?

Random Variable 2. The warranty for a particular system on a new car is 2 years. During which there is no limit to the number of warranty claims per car. Historically, the average number of claims per car during the period is 0.8 claims. What type of distribution could be used to model the number of warranty claims per car?

Answers

Answer:

1) This random variable should be modelled using a binomial distribution since we have independence between the events and a bernoulli trial each time when the experiment is conducted, a fixd value for the sample size n and for the probability of success.

Let X the random variable of interest, on this case th distribution would be given by:

[tex]X \sim Binom(n=10, p=0.02)[/tex]

The probability mass function for the Binomial distribution is given as:

[tex]P(X)=(nCx)(p)^x (1-p)^{n-x} = (10Cx) (0.02)^x (1-0.02)^{10-x}[/tex]

2) For this case we don't have a sample size provided and we just have an average rate for a given period, so then we can assume that the best distribution for this case is the Poisson distribution.

Let X the random variable that represent the number of claims per car. We know that [tex]X \sim Poisson(\lambda)[/tex]

The probability mass function for the random variable is given by:

[tex]f(x)=\frac{e^{-\lambda} \lambda^x}{x!} , x=0,1,2,3,4,...[/tex]

Where [tex]\lambda=0.2[/tex] represent the mean of occurrences in the interval of 2 years provided.

And f(x)=0 for other case.

Step-by-step explanation:

Previous concepts

The binomial distribution is a "DISCRETE probability distribution that summarizes the probability that a value will take one of two independent values under a given set of parameters. The assumptions for the binomial distribution are that there is only one outcome for each trial, each trial has the same probability of success, and each trial is mutually exclusive, or independent of each other".

Random variable 1

This random variable should be modelled using a binomial distribution since we have independence between the events and a bernoulli trial each time when the experiment is conducted, a fixd value for the sample size n and for the probability of success.

Let X the random variable "number of failed drawers", on this case th distribution would be given by:

[tex]X \sim Binom(n=10, p=0.02)[/tex]

The probability mass function for the Binomial distribution is given as:

[tex]P(X)=(nCx)(p)^x (1-p)^{n-x} = (10Cx) (0.02)^x (1-0.02)^{10-x}[/tex]

Where (nCx) means combinatory and it's given by this formula:

[tex]nCx=\frac{n!}{(n-x)! x!}[/tex]

Random variable 2

For this case we don't have a sample size provided and we just have an average rate for a given period, so then we can assume that the best distribution for this case is the Poisson distribution.

Let X the random variable that represent the number of claims per car. We know that [tex]X \sim Poisson(\lambda)[/tex]

The probability mass function for the random variable is given by:

[tex]f(x)=\frac{e^{-\lambda} \lambda^x}{x!} , x=0,1,2,3,4,...[/tex]

Where [tex]\lambda=0.2[/tex] represent the mean of occurrences in the interval of 2 years provided.

And f(x)=0 for other case.

What’s the surface area 6ft, 4.5ft, 8ft, 6ft

Answers

Answer:

i need more information like what is the length width etc.

Step-by-step explanation:

Identify the power of ten that defines each of these prefixes. Input your answers as 10* where x is the power of ten. kilo- nano- micro- centi- mega- milli-

Answers

Answer:

kilo is [tex]10^{3}[/tex]

nano is [tex]10^{-9}[/tex]

micro is [tex]10^{-6}[/tex]

centi is [tex]10^{-2}[/tex]

mega is [tex]10^{6}[/tex]

milli is [tex]10^{-3}[/tex]

Step-by-step explanation:

Examples of power of 10 are:

[tex]100 = 10^{2}[/tex]

[tex]10 = 10^{1}[/tex]

[tex]1 = 10^{0}[/tex]

[tex]0.1 = 10^{-1}[/tex]

[tex]0.01 = 10^{-2}[/tex]

kilo is 1000. So kilo is [tex]10^{3}[/tex]

Nano is 0.000000001. So nano is [tex]10^{-9}[/tex]

micro is 0.000001. So micro is [tex]10^{-6}[/tex]

centi is 0.01. So centi is [tex]10^{-2}[/tex]

Mega is 1000000. So mega is [tex]10^{6}[/tex]

milli is 0.001. So milli is [tex]10^{-3}[/tex]

The following are conversions.

[tex]\rm{kilo}=10^3\\\rm {nano}=10^{-9}\\\rm{micro}=10^{-6}\\\rm{centi}=10^{-2}\\\rm{Mega}=10^6\\\rm{milli}=10^{-3}[/tex]

On the basis of the power of 10 the following categories can be defined that are as follow:

[tex]\rm{kilo}=10^3\\\rm {nano}=10^{-9}\\\rm{micro}=10^{-6}\\\rm{centi}=10^{-2}\\\rm{Mega}=10^6\\\rm{milli}=10^{-3}[/tex]

The values of all are as follows.

kilo is 1000.

Nano is 0.000000001.

micro is 0.000001.

Centi is 0.01.

Mega is 1000000.

Milli is 0.001.

To know more about it, please refer to the link:

https://brainly.com/question/3993103

The lifetime of a certain type of TV tube has a normal distribution with a mean of 61 and a standard deviation of 6 months. What portion of the tubes lasts between 57 and 59 months?

Answers

Answer:

[tex]P(57<X<59)=P(\frac{57-\mu}{\sigma}<\frac{X-\mu}{\sigma}<\frac{59-\mu}{\sigma})=P(\frac{57-61}{6}<Z<\frac{59-61}{6})=P(-0.67<Z<-0.33)[/tex]

[tex]P(-0.67<z<-0.33)=P(z<-0.33)-P(z<-0.67)[/tex]

[tex]P(-0.67<z<-0.33)=P(z<-0.33)-P(z<-0.67)=0.371-0.251=0.119[/tex]

Step-by-step explanation:

Previous concepts

Normal distribution, is a "probability distribution that is symmetric about the mean, showing that data near the mean are more frequent in occurrence than data far from the mean".

The Z-score is "a numerical measurement used in statistics of a value's relationship to the mean (average) of a group of values, measured in terms of standard deviations from the mean".  

Solution to the problem

Let X the random variable that represent the lifetime for a TV of a population, and for this case we know the distribution for X is given by:

[tex]X \sim N(61,6)[/tex]  

Where [tex]\mu=61[/tex] and [tex]\sigma=6[/tex]

We are interested on this probability

[tex]P(57<X<59)[/tex]

And the best way to solve this problem is using the normal standard distribution and the z score given by:

[tex]z=\frac{x-\mu}{\sigma}[/tex]

If we apply this formula to our probability we got this:

[tex]P(57<X<59)=P(\frac{57-\mu}{\sigma}<\frac{X-\mu}{\sigma}<\frac{59-\mu}{\sigma})=P(\frac{57-61}{6}<Z<\frac{59-61}{6})=P(-0.67<Z<-0.33)[/tex]

And we can find this probability like this:

[tex]P(-0.67<z<-0.33)=P(z<-0.33)-P(z<-0.67)[/tex]

And in order to find these probabilities we can use tables for the normal standard distribution, excel or a calculator.  

[tex]P(-0.67<z<-0.33)=P(z<-0.33)-P(z<-0.67)=0.371-0.251=0.119[/tex]

Use inductive reasoning to predict the next line in the pattern. Then perform the arithmetic to determine whether your conjecture is correct. 8(5) = 10(5 - 1) 8(5) + 8(25) = 10(25 - 1) 8(5) + 8(25) + 8(125) = 10(125 - 1) 8(5) + 8(25) + 8(125) + 8(625) = 10(625 - 1)

Answers

Answer:

8(5) + 8(25) + 8(125) + 8(625) +8(3125)= 10(3125 - 1)=31240

Hence proved Conjecture is correct

L.H.S=R.H.S

Step-by-step explanation:

Consider the pattern:

8(5)=10(5-1)=40

8(5) + 8(25) = 10(25 - 1) =240

8(5) + 8(25) + 8(125) = 10(125 - 1) =1240

8(5) + 8(25) + 8(125) + 8(625) = 10(625 - 1)=6240

According to inductive reasoning next term of pattern will become:

8(5) + 8(25) + 8(125) + 8(625) +8(3125)= 10(3125 - 1)=31240

Checking whether conjecture is correct or not:

Consider L.H.S:

8(5) + 8(25) + 8(125) + 8(625) +8(3125)

40+200+1000+5000+25000

31240

R.H.S:

31240

Hence proved Conjecture is correct

L.H.S=R.H.S

(1 point) Let C be the positively oriented square with vertices (0,0)(0,0), (1,0)(1,0), (1,1)(1,1), (0,1)(0,1). Use Green's Theorem to evaluate the line integral ∫C1y2xdx+9x2ydy∫C1y2xdx+9x2ydy.

Answers

Answer:

[tex]\displaystyle \oint_C {y^2x \, dx + 9x^2y \, dy} = \boxed{\bold{4}}[/tex]

General Formulas and Concepts:
Calculus

Differentiation

DerivativesDerivative Notation

Derivative Property [Multiplied Constant]:
[tex]\displaystyle \bold{(cu)' = cu'}[/tex]
Derivative Rule [Basic Power Rule]:

f(x) = cxⁿf’(x) = c·nxⁿ⁻¹

Integration

Integrals

Integration Rule [Fundamental Theorem of Calculus 1]:
[tex]\displaystyle \bold{\int\limits^b_a {f(x)} \, dx = F(b) - F(a)}[/tex]

Integration Property [Multiplied Constant]:
[tex]\displaystyle \bold{\int {cf(x)} \, dx = c \int {f(x)} \, dx}[/tex]

Multivariable Calculus

Partial Derivatives

Vector Calculus

Circulation Density:
[tex]\displaystyle \bold{F = M \hat{\i} + N \hat{\j} \rightarrow \frac{\partial N}{\partial x} - \frac{\partial M}{\partial y}}[/tex]

Green's Theorem [Circulation Curl/Tangential Form]:
[tex]\displaystyle \bold{\oint_C {F \cdot T} \, ds = \oint_C {M \, dx + N \, dy} = \iint_R {\bigg( \frac{\partial N}{\partial x} - \frac{\partial M}{\partial y} \bigg)} \, dx \, dy}[/tex]

Step-by-step explanation:

Step 1: Define

Identify given.

[tex]\displaystyle \oint_C {y^2x \, dx + 9x^2y \, dy}[/tex]

[See Graph Attachment] Points (0, 0) → (1, 0) → (1, 1) → (0, 1)

[tex]\displaystyle \text{Region:} \left \{ {{0 \leq x \leq 1} \atop {0 \leq y \leq 1}} \right.[/tex]

Step 2: Integrate Pt. 1

Define vector functions M and N:
[tex]\displaystyle M = y^2x , \ N = 9x^2y[/tex][Circulation Density] Differentiate [Derivative Rules and Properties]:
[tex]\displaystyle \frac{\partial M}{\partial y} = 2yx , \ \frac{\partial N}{\partial x} = 18xy[/tex][Green's Theorem] Substitute in Circulation Density:
[tex]\displaystyle \oint_C {y^2x \, dx + 9x^2y \, dy} = \iint_R {18xy - 2xy} \, dx \, dy[/tex]Simplify:
[tex]\displaystyle \oint_C {y^2x \, dx + 9x^2y \, dy} = \iint_R {16xy} \, dx \, dy[/tex][Integrals] Substitute in region R:
[tex]\displaystyle \oint_C {y^2x \, dx + 9x^2y \, dy} = \int\limits^1_0 \int\limits^1_0 {16xy} \, dx \, dy[/tex]

Step 3: Integrate Pt. 2

We can evaluate the Green's Theorem double integral we found using basic integration techniques listed above:
[tex]\displaystyle \begin{aligned}\oint_C {y^2x \, dx + 9x^2y \, dy} & = \int\limits^1_0 \int\limits^1_0 {16xy} \, dx \, dy \\& = \int\limits^1_0 {8x^2y \bigg| \limits^{x = 1}_{x = 0}} \, dy \\& = \int\limits^1_0 {8y} \, dy \\& = 4y^2 \bigg| \limits^{y = 1}_{y = 0} \\& = \boxed{\bold{4}}\end{aligned}[/tex]

∴ we have evaluated the line integral using Green's Theorem.

---

Learn more about Green's Theorem: https://brainly.com/question/17186812
Learn more about multivariable calculus: https://brainly.com/question/14502499

---

Topic: Multivariable Calculus

Unit: Green's Theorem and Surfaces

Tim claims that a coin is coming up tails less than half of the time. In 110 tosses, the coin comes up tails 47 times. Using P-value, test Tim's claim. Use a 0.10 significance level and determine conclusion.

Answers

Answer:

[tex]z=\frac{0.427 -0.5}{\sqrt{\frac{0.5(1-0.5)}{110}}}=-1.531[/tex]  

[tex]p_v =P(z<-1.531)=0.0629[/tex]  

If we compare the p value obtained and using the significance level given [tex]\alpha=0.1[/tex] we have that [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can said that at 10% of significance the proportion of tails is significantly less than 0.5.  

Step-by-step explanation:

1) Data given and notation

n=110 represent the random sample taken

X=47 represent the number of tails obtained

[tex]\hat p=\frac{47}{110}=0.427[/tex] estimated proportion of tails

[tex]p_o=0.5[/tex] is the value that we want to test

[tex]\alpha=0.1[/tex] represent the significance level

Confidence=90% or 0.90

z would represent the statistic (variable of interest)

[tex]p_v[/tex] represent the p value (variable of interest)  

2) Concepts and formulas to use  

We need to conduct a hypothesis in order to test the claim that the proportion of tails is lower than 0.5:  

Null hypothesis:[tex]p\geq 0.5[/tex]  

Alternative hypothesis:[tex]p < 0.5[/tex]  

When we conduct a proportion test we need to use the z statistic, and the is given by:  

[tex]z=\frac{\hat p -p_o}{\sqrt{\frac{p_o (1-p_o)}{n}}}[/tex] (1)  

The One-Sample Proportion Test is used to assess whether a population proportion [tex]\hat p[/tex] is significantly different from a hypothesized value [tex]p_o[/tex].

3) Calculate the statistic  

Since we have all the info requires we can replace in formula (1) like this:  

[tex]z=\frac{0.427 -0.5}{\sqrt{\frac{0.5(1-0.5)}{110}}}=-1.531[/tex]  

4) Statistical decision  

It's important to refresh the p value method or p value approach . "This method is about determining "likely" or "unlikely" by determining the probability assuming the null hypothesis were true of observing a more extreme test statistic in the direction of the alternative hypothesis than the one observed". Or in other words is just a method to have an statistical decision to fail to reject or reject the null hypothesis.  

The significance level provided [tex]\alpha=0.1[/tex]. The next step would be calculate the p value for this test.  

Since is a left tailed test the p value would be:  

[tex]p_v =P(z<-1.531)=0.0629[/tex]  

If we compare the p value obtained and using the significance level given [tex]\alpha=0.1[/tex] we have that [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can said that at 10% of significance the proportion of tails is significantly less than 0.5.  

Which equation shows this relationship?

Answers

Answer:

Option A is the correct answer.

Step-by-step explanation:

The equation of a straight line can be represented in the slope-intercept form, y = mx + c

Where c = intercept

Slope, m =change in value of y on the vertical axis / change in value of x on the horizontal axis

change in the value of y = y2 - y1

Change in value of x = x2 -x1

y2 = final value of y

y 1 = initial value of y

x2 = final value of x

x1 = initial value of x

From the graph,

y2 = 6

y1 = 2

x2 = 3

x1 = 1

Slope,m = (6 - 2)/(3 - 1) = 4/2 = 2

To determine the intercept, we would substitute x = 3, y = 6 and

m= 2 into y = mx + c. It becomes

6 = 2 × 3 + c = 6 + c

c = 6 - 6 = 0

The equation becomes

y = 2x

Topic: Multiplying and Dividing Real Numbers

Find -30 ÷ (6a) when a = -5 . Write the answer in simplest form.

Answers

Final answer:

To solve -30 ÷ (6a) when a = -5, substitute the value of a into the expression. The answer in simplest form is 1.

Explanation:

To solve the expression -30 ÷ (6a), we need to substitute the value of a, which is -5.

Substituting the value of a, -30 ÷ (6a) becomes -30 ÷ (6*(-5)).

Using the order of operations, first, we solve the multiplication inside the parentheses: -30 ÷ (-30).

Dividing a negative number by a negative number results in a positive number, so -30 ÷ (-30) = 1.

Therefore, the answer in simplest form is 1.

These data represent the volumes in cubic yards of the largest dams in the united states and in South America. Construct a boxplot of the data for each region and compare the distribution.
United States South America
125,628 311,539
92,000 274,026
78,008 105,944
77,700 102,014
66,500 56,242
62,850 46,563
52,435
50,000

Answers

By organizing the data and determining the minimum, maximum, median, and quartiles for the volumes of the largest dams in the United States and South America, we can construct boxplots to compare the distribution of the data in each region   Create a text based boxplot

United States:

 +---------+---------+---------+---------+---------+

 | Minimum |   Q1    | Median  |   Q3    | Maximum |

 +---------+---------+---------+---------+---------+

         |-----|-----|-----|-----|-----|

         50,000        77,700  77,854      108,814       125,628

South America:

 +---------+---------+---------+---------+---------+

 | Minimum |   Q1    | Median  |   Q3    | Maximum |

 +---------+---------+---------+---------+---------+

         |-----|-----|-----|-----|-----|

         46,563        51,403  103,979     292,783       311,539

To construct a boxplot for the volumes of the largest dams in the United States and South America, we will first need to organize the data in ascending order. Then we can determine the minimum, maximum, median, and quartiles. The boxplot will allow us to compare the distribution of the data for each region.

United States volumes (in cubic yards) in ascending order:

50,000

52,435

62,850

66,500

77,700

78,008

92,000

125,628

South America volumes (in cubic yards) in ascending order:

46,563

56,242

102,014

105,944

274,026

311,539

Now, we can find the minimum, maximum, median, and quartiles for each dataset:

United States:

- Minimum: 50,000

- Maximum: 125,628

- Median: The middle value is the average of the two middle values, (77,700 + 78,008) / 2 = 77,854

- First Quartile (Q1): The median of the lower half of the dataset, (52,435 + 62,850) / 2 = 57,642.5

- Third Quartile (Q3): The median of the upper half of the dataset, (92,000 + 125,628) / 2 = 108,814

South America:

- Minimum: 46,563

- Maximum: 311,539

- Median: The middle value is the average of the two middle values, (102,014 + 105,944) / 2 = 103,979

- First Quartile (Q1): The median of the lower half of the dataset, (46,563 + 56,242) / 2 = 51,402.5

- Third Quartile (Q3): The median of the upper half of the dataset, (274,026 + 311,539) / 2 = 292,782.5

With this information, we can construct boxplots for each region. The boxplots will visually represent the minimum, first quartile, median, third quartile, and maximum values for each dataset.

A population of 30 deer are introduced into a wildlife sanctuary. It is estimated that the sanctuary can sustain up to 400 deer. Absent constraints, the population would grow by 40% per year.

Estimate the population after one year p1 =

Estimate the population after two years p2=

Answers

The population after one year would be 42 deer.

And, the population after two years would be 59 deer.

Used the concept of compound interest where the amount A after t years, starting from an initial value P and growing at a rate r is:  

[tex]A = P(1+r)^t[/tex]

Given that,

A population of 30 deer is introduced into a wildlife sanctuary.

Hence, After one year we have;

P₁ = 30 (1 + 0.40)¹  

= 42

After two years;

P₂ = 30 (1 + 0.40)²

= 59

Thus, the population after one year = 42 deer.

And, the population after two years = 59 deer.

Learn more about compound interest here:

brainly.com/question/26457073

#SPJ12

Verify that the points are the vertices of a parallelogram, and find its area. A(1, 1, 3), B(2, −5, 6), C(4, −2, −1), D(3, 4, −4)

Answers

The points A(1, 1, 3), B(2, -5, 6), C(4, -2, -1), and D(3, 4, -4) form a parallelogram with an area of [tex]\sqrt{(1483)[/tex] square units.

To determine if the points A(1, 1, 3), B(2, -5, 6), C(4, -2, -1), and D(3, 4, -4) form the vertices of a parallelogram, we need to check two conditions:

Opposite sides are parallel.

Opposite sides are of equal length.

First, let's calculate the vectors representing the sides of the quadrilateral:

Vector AB = (2-1, -5-1, 6-3) = (1, -6, 3)

Vector BC = (4-2, -2-(-5), -1-6) = (2, 3, -7)

Vector CD = (3-4, 4-(-2), -4-(-1)) = (-1, 6, -3)

Vector DA = (1-3, 1-4, 3-(-4)) = (-2, -3, 7)

Next, we check if opposite sides are parallel. AB is parallel to CD, and BC is parallel to DA, as the direction ratios are proportional.

Now, we need to verify that opposite sides have the same length. Using the distance formula, we find:

[tex]|AB| = \sqrt{(1^2 + (-6)^2 + 3^2)} = \sqrt{(46)[/tex]

[tex]|CD| = \sqrt{((-1)^2 + 6^2 + (-3)^2)} = \sqrt{(46)[/tex]

[tex]|BC| = \sqrt{(2^2 + 3^2 + (-7)^2)} = \sqrt{(62)[/tex]

[tex]|DA| = \sqrt{((-2)^2 + (-3)^2 + 7^2)} = \sqrt{(62)[/tex]

Since opposite sides are both parallel and have equal lengths, the given points form the vertices of a parallelogram.

To find the area of the parallelogram, we can use the magnitude of the cross product of vectors AB and BC (or vectors BC and CD):

Area = |AB x BC| = |(1, -6, 3) x (2, 3, -7)| = |(-33, 17, 15)| = [tex]\sqrt{(33^2 + 17^2 + 15^2)} = \sqrt{(1483).[/tex]

So, the area of the parallelogram formed by the given points is sqrt(1483) square units.

For more such questions on parallelogram

https://brainly.com/question/970600

#SPJ3

To find out if the given points A(1, 1, 3), B(2, −5, 6), C(4, −2, −1), and D(3, 4, −4) are the vertices of a parallelogram, we need to prove that the opposite sides are equal and parallel. In a parallelogram, both pairs of opposite sides are parallel and have the same length.

Step 1: Find the vectors representing the sides of the potential parallelogram.

Vectors AB, BC, CD, and DA can be calculated using the coordinates of points A, B, C, and D.

AB = B - A = (2 - 1, -5 - 1, 6 - 3) = (1, -6, 3)
BC = C - B = (4 - 2, -2 + 5, -1 - 6) = (2, 3, -7)
CD = D - C = (3 - 4, 4 + 2, -4 - (-1)) = (-1, 6, -3)
DA = A - D = (1 - 3, 1 - 4, 3 - (-4)) = (-2, -3, 7)

Step 2: Check if opposite sides are equal and parallel.

For sides AB and CD to be parallel and equal in length, vector AB should be equal to vector CD or AB should be a scalar multiple of CD.

Looking at vectors AB and CD:
AB = (1, -6, 3)
CD = (-1, 6, -3)

Vector CD is indeed the negative of vector AB, which means these vectors have the same length but opposite directions, so AB and CD are parallel and equal in length.

Now we need to check if vector BC is equal and parallel to vector DA.

BC = (2, 3, -7)
DA = (-2, -3, 7)

Vector DA is also the negative of vector BC. This means that they too have the same length but opposite directions, so BC and DA are parallel and equal in length.
Since both pairs of opposite sides are parallel and equal in length, points A, B, C, and D form a parallelogram.
Step 3: Calculate the area of the parallelogram.
The area of a parallelogram can be found using the cross product of two adjacent sides. The magnitude of the cross product vector gives us the area.
Let's calculate the cross product of vectors AB and AD:
AB = (1, -6, 3)
AD = (-2, -3, 7)  (Remember, AD is the opposite of DA)
The cross product AB x AD is:
| i   j  k  |
| 1  -6  3 |
| -2 -3  7 |
= i((-6)(7) - (3)(-3)) - j((1)(7) - (3)(-2)) + k((1)(-3) - (-6)(-2))
= i(-42 + 9) - j(7 + 6) + k(-3 - 12)
= i(-33) - j(13) + k(-15)
So the cross product of AB and AD is (-33, -13, -15).
The magnitude of this vector is √((-33)^2 + (-13)^2 + (-15)^2) = √(1089 + 169 + 225) = √(1483) ≈ 38.50 units squared.
Therefore, the area of the parallelogram formed by points A, B, C, and D is approximately 38.50 square units.

Suppose the value of x varies from x=2 to x=5.25. How much did the value of x change?

Answers

Answer:

The value of x increased by 3.25.

Step-by-step explanation:

It is given that the value of x varies from x=2 to x=5.25.

We need to find the change is x.

If value of a variable x varies from a to b, then the change in te value of variable is

Change in x = b - a

For the given problem the variable is x, a=2 and b=5.25.

Change in x = 5.25 - 2

                  = 3.25

If the change is positive, then the value of variable increased and if the change is negative, then the value of variable decreased.

Therefore, the value of x increased by 3.25.

Final answer:

The value of x changed by 3.25 as it varies from x=2 to x=5.25.

Explanation:

The change in the value of x from x=2 to x=5.25 can be calculated by subtracting the initial value from the final value. In this case, the change in x is 5.25 - 2 = 3.25. Thus, the value of x has changed by 3.25.

Learn more about Change in Value here:

https://brainly.com/question/31422668

#SPJ3

In the rolling of two fair dice calculate the following: P(Sum of the two dice is 7) = ______

Answers

Answer:

P(Sum of the two dice is 7) = 6/36

Step-by-step explanation:

A probability is the number of desired outcomes divided by the number of total outcomes.

In this problem, we have that:

A fair dice can have any value between 1 and 6 with equal probability. There are two fair dices, so we have the following possible outcomes.

Possible outcomes

(first rolling, second rolling)

(1,1), (2,1), (3,1), (4,1), (5,1), (6,1)

(1,2), (2,2), (3,2), (4,2), (5,2), (6,2)

(1,3), (2,3), (3,3), (4,3), (5,3), (6,3)

(1,4), (2,4), (3,4), (4,4), (5,4), (6,4)

(1,5), (2,5), (3,5), (4,5), (5,5), (6,5)

(1,6), (2,6), (3,6), (4,6), (5,6), (6,6)

There are 36 possible outcomes.

Desired outcomes

Sum is 7, so

(1,6), (6,1), (5,2), (2,5), (3,4), (4,3).

There are 6 desired outcomes, that is, the number of outcomes in which the sum of the two dice is 7.

Answer

P(Sum of the two dice is 7) = 6/36

Final answer:

The probability of getting a sum of 7 while rolling two fair dice is 1/6.

Explanation:

In the rolling of two fair dice, the probability of getting a sum of 7 is:

There are 6 ways to get a sum of 7: (1,6), (2,5), (3,4), (4,3), (5,2), and (6,1).

There are a total of 36 possible outcomes when rolling two dice, each with a probability of 1/36.

Therefore, the probability of rolling a sum of 7 is 6/36 or 1/6.

We flip a fair coin five times. For every heads you pay me $1 and for every tails I pay you $1. Let X denote the my net winning at the end of the flips. Find the possible values and the probability mass function of X.

Answers

Final answer:

The possible values of net winnings in this coin flipping game range from -5 to 5 dollars. The individual probabilities of these outcomes can be calculated using a binomial probability distribution. The game is symmetric because of the fairness of the coin, resulting in the probability of winning and losing $5 being equal.

Explanation:

In this coin flipping game

, we have five independent trials (flips) each having two possible outcomes (heads or tails). This implies

a binomial distribution

is expected. In each trial, 'success' can be defined as getting heads, and 'failure' as getting tails. Number of successes (X) can range from 0 to 5, that is your net winnings can be from -5 to 5 dollars.

The Probability Mass Function (PMF) of X can be calculated using the binomial distribution formula, which is: P(X=k) = (5 choose k) * (0.5)^k * (0.5)^(5-k), where k represents number of 'successes' (heads), (5 choose k) is the number of combinations of getting k successful outcomes in 5 trials, and (0.5) is the probability of getting heads or tails.

PMF will give you the probability of each possible outcome (from -5 to 5 dollars), which in this specific scenario is symmetric due to the coin being fair. So for instance, winning $5 and losing $5 both have a probability of (0.5)^5 = 0.03125.

Learn more about Probability here:

https://brainly.com/question/22962752

#SPJ3

Bruno listens to podcasts for
two and a half hours a day.
Write an equation where x is
the number of days and y is
the total number of hours.
What is the constant of
proportionality? 25 points brainiest​

Answers

Answer:the constant of proportionality is 2.5 hours per day.

The equation is y = 2.5x

Step-by-step explanation:

Let x represent the number of days that Bruno listens to podcasts.

Let y represent the total number of hours that Bruno listens to podcasts.

Bruno listens to podcasts for

two and a half hours a day.

Let k represent the constant of proportionality. Therefore,

y = kx

k = y/x

So k = 2.5/1 = 2.5 hours/day

The equation is expressed as

y = 2.5x

If C is a set with c elements, how many elements are in the power set of C? Explain your answer.

Answers

Answer:

2^c

Step-by-step explanation:

A concrete column has a diameter of 350mm and a length of 2m. If the density (mass/volume) of concrete is 2.45 Mg/m3 determine the weight of the column in pounds. 1 pound = 4.4482 N

Answers

Answer:

The weight of concrete column is 1039 Newton.

Step-by-step explanation:

We are given the following in the question:

Diameter of column = 350 mm = 0.35 m

[tex]\text{Radius} = \dfrac{\text{Diameter}}{2} = \dfrac{0.35}{2} = 0.175 ~m[/tex]

Length of column = 2 m

Density of column = 2.45 Mg per meter cube

Volume of column =

[tex]\text{Volume of cylinder}\\= \pi r^2h\\\text{where r is the radius and h is the height}\\V = \dfrac{22}{7}\times (0.175)^2\times 2\\\\V = 0.1925\text{ cubic meter}[/tex]

Mass of column =

[tex]\text{Volume of column}\times \text{Density of cone}\\= 2.45\times 0.1925\\=0.4716~ Mg\\=0.4716\times 10^3~Kg\\= 471.6~Kg[/tex]

Weight of column =

[tex]\text{Mass}\times g\\= 471.6\times 9.8\\= 4621.68~ N[/tex]

Weight in pounds =

[tex]1 \text{ pound} = 4.4482 ~N\\\\\Rightarrow \dfrac{4621.68}{4.4482} = 1039\text{ pounds}[/tex]

The weight of concrete column is 1039 Newton.

Final answer:

To determine the weight of the concrete column in pounds, calculate its mass using the density formula and then convert it using the conversion factor. The weight of the column is approximately 1.882π lb.

Explanation:

To determine the weight of the concrete column in pounds, we need to calculate its mass and then convert it to pounds using the conversion factor. First, let's find the volume of the column by using the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height.

The radius is half the diameter, so r = 350mm / 2 = 175mm = 0.175m. The height is given as 2m. Thus, the volume is: V = π(0.175m)^2 * 2m = 0.1925π m³.

Next, we can calculate the mass of the concrete using the density formula: mass = density * volume. Plugging in the given density of concrete (2.45 Mg/m³) and the calculated volume, we get: mass = 2.45 Mg/m³ * 0.1925π m³ = 0.425π Mg.

To convert the mass to pounds, we need to multiply by the conversion factor of 4.4482 N / 1 lb. Using this conversion factor, the weight of the concrete column is: weight = 0.425π Mg * 4.4482 N / 1 lb = 1.882π lb.

You have performed a dihybrid cross of plants and got the following data: 206 purple tall, 65 white tall, 83 purple short, 30 white short. Perform a chi-square analysis to test the null hypothesis that purple coloring is dominant to white and tall height is dominant to short height.

Answers

The a chi-square of the experimental data is 4.32.

Chi-square

Observed data(o)

Purple tall=206

White tall=65

Purple short=83

White short=30

Total=384

Expected (e)

9 Purple tall=216

3 White tall=72

3 Purple short=72

1 White short=24

Chi-square

Purple tall=(206-216)²/216=0.46

White tall=(65-72)²/72=0.68

Purple short=(83-72)²/72=1.68

White short=(30-24)²/24=1.5

X²=0.46+0.68+1.68+1.5

X²=4.32

Inconclusion  a chi-square of the experimental data is 4.32.

Learn more about chi-square here:https://brainly.com/question/4543358

Final answer:

To analyze the dihybrid cross data, we calculate the expected frequencies using the Mendelian 9:3:3:1 ratio, perform a chi-square analysis, and then conclude whether the observed data significantly deviates from the expected phenotypic ratio.

Explanation:

To analyze the given data, we must first establish our expected ratio. For a dihybrid cross involving two independently assorting traits with complete dominance, Mendel's laws predict a 9:3:3:1 phenotypic ratio among the F2 progeny. These numbers represent the ratio of the offspring displaying both dominant traits, one dominant and one recessive trait, one recessive and one dominant trait, and both recessive traits, respectively.

With the given data:

206 purple tall (dominant traits)

65 white tall (one recessive trait)

83 purple short (one recessive trait)

30 white short (recessive traits)

Adding these together, we have a total of 384 plants. To get the expected counts based on the 9:3:3:1 ratio: Expected purple tall = 9/16 * 384 = 216, Expected white tall = 3/16 * 384 = 72, Expected purple short = 3/16 * 384 = 72, and Expected white short = 1/16 * 384 = 24. Now, we can perform a chi-square analysis using these expected counts.

The chi-square formula is: X^2 = ∑ (observed - expected)^2 / expected. Plugging in our values:

X^2 for purple tall = (206 - 216)^2 / 216

X^2 for white tall = (65 - 72)^2 / 72

X^2 for purple short = (83 - 72)^2 / 72

X^2 for white short = (30 - 24)^2 / 24

After calculating these values, they need to be added to get the total chi-square value. We then compare this value to a critical value from a chi-square distribution table (typically at a 0.05 significance level) with the degrees of freedom equal to the number of classes - 1, here df = 3.

Based on this comparison, we determine if the observed ratios significantly deviate from the expected 9:3:3:1 ratio. If the calculated chi-square value is less than or equal to the critical value, our null hypothesis that purple color and tall height are dominant and assort independently holds true. However, if it's greater, we may have to reject the null hypothesis.

I need help with letter B, please!

The general question on the photo says: a company is hiring a truck driver to deliver the company's product. Truck driver A charges an initial fee of $50 plus $7 per mile. Truck driver B charges an initial fee of $175 plus $2 per mile

Question B: Solve the system of linear equations by graphing. Interpret your solution.

I will give 25 points if someone gets the answer correct right away!

Answers

So if you want to fit the y-intercepts or "b", on the y-axis you should go by 25's [0, 25, 50, 75, 100...]

If the x-axis does not have to follow the same pattern (25's), you should go by 5's  [0, 5, 10, 15, 20...]

y = 7x + 50

y = 2x + 175

First I would plot the y-intercepts for each equation, then plot a few points with x = 5, 10, 15      Then draw a straight line.

The point where the two lines meet/cross paths is your solution. It should be (25, 225)  The x-axis is the number of miles, and the y-axis is the total cost. So Truck driver A and B would arrive/be at the same place/meet in 25 miles at the same cost of $225

Find the areas of the parallelogram whose vertices are given below. ​A(negative 1​,4​) ​B(4​,0​) ​C(12​,3​) ​D(7​,7​) The area of parallelogram ABCD is nothing square units.

Answers

Answer:

So the parallelogram is in the first and second quadrants.

Step-by-step explanation:

From Exercise we have that the parallelogram have a vetrices:

A(negative 1​,4​) ​B(4​,0​) ​C(12​,3​) ​D(7​,7​). We use a site geogebra.org to plof a graph for the given parallelogram.

From the graphs we can see that the parallelogram is mostly in the first quadrant and smaller in the second quadrant. So the parallelogram is in the first and second quadrants.

Find an equation of the sphere with points P such that the distance from P to A(−3, 4, 4) is twice the distance from P to B(6, 3, −1). Find its center and radius. center (x, y, z) = radius

Answers

Answer:

Therefore, we conclude that the center of sphere at point

(27/3, -8/3, -8/3) with a radius 6.89.

Step-by-step explanation:

We have the formula for distance, we get

\sqrt{(x+3)^2+(y-4)^2+(z-4)^2} =2· \sqrt{(x-6)^2+(y-3)^2+(z+1)^2}

(x+3)^2+(y-4)^2+(z-4)^2=4·[(x-6)^2+(y-3)^2+(z+1)^2]

x²+6x+9+y²-8y+16+z²-8z+16=4x²-48x+4y²-24y+4z²+8z+184

3x²+3y²+3z²-54x+16y+16z=-143

(x²-54x/3)+(y²+16y/3)+(z²+16z/3)=-143/3

(x²-54x/3+729/9)+(y²+16y/3+64/9)+(z²+16z/3+64/9)=-143/3+729/9+2·64/9

(x-27/3)²+(y+8/3)²+(z+8/3)²=428/9

We calculate a radius \sqrt{428/9} =6.89

Therefore, we conclude that the center of sphere at point

(27/3, -8/3, -8/3) with a radius 6.89.

Final answer:

To find the equation of the sphere in question, use the property that the distance from P to A is twice the distance from P to B, and solve the resulting equation to find the sphere's center and radius.

Explanation:

To find an equation of a sphere where the distance from a generic point P to the point A(−3, 4, 4) is twice the distance from P to the point B(6, 3, −1), we use the geometric properties of spheres and distances in three-dimensional space. The distance from a point P to another point Q in 3D space, with coordinates P(x1, y1, z1) and Q(x2, y2, z2), can be found using the distance formula d = √((x2 − x1)² + (y2 − y1)² + (z2 − z1)²).

Let's denote the coordinates of P as (x, y, z). To satisfy the given condition, we have to solve the equation (x + 3)² + (y − 4)² + (z − 4)² = 4[(x − 6)² + (y − 3)² + (z + 1)²]. This equation is derived from setting the distance from P to A as twice the distance from P to B and then squaring both sides to eliminate the square root.

Solving this equation will give us the center and radius of the sphere.

Substitute yequalse Superscript rx into the given differential equation to determine all values of the constant r for which yequalse Superscript rx is a solution of the equation. y double prime plus 4 y prime minus 12 y equals 0

Answers

Answer:

y(x)=C_1·e^{2x} + C_2·e^{-6x}

Step-by-step explanation:

From Exercise we have the differential equation

y''+4y'-12=0.  

This is a characteristic differential equation and we are solved as follows:

y''+4y'-12=0

m²+4m-12=0

m_{1,2}=\frac{-4±\sqrt{16+48}}{2}

m_{1,2}=\frac{-4±\sqrt{64}}{2}

m_{1,2}=\frac{-4±8}{2}

m_1=2

m_2=-6

The general solution of this differential equation is in the form

y(x)=C_1·e^{m_1 ·x} + C_2·e^{m_2 ·x}

Therefore, we get

y(x)=C_1·e^{2x} + C_2·e^{-6x}

The correct values of the constant [tex]\( r \)[/tex] for which [tex]\( y = e^{rx} \)[/tex] is a solution of the differential equation [tex]\( y'' + 4y' - 12y = 0 \)[/tex] are [tex]\( r = 2 \)[/tex] and [tex]\( r = -6 \).[/tex]

To find the values of [tex]\( r \)[/tex], we substitute [tex]\( y = e^{rx} \)[/tex] into the differential equation. First, we find the first and second derivatives of [tex]\( y \)[/tex]:

[tex]\[ y' = \frac{d}{dx}(e^{rx}) = re^{rx} \][/tex]

[tex]\[ y'' = \frac{d}{dx}(re^{rx}) = r^2e^{rx} \][/tex]

Now, we substitute [tex]\( y \)[/tex], [tex]\( y' \)[/tex], and [tex]\( y'' \)[/tex] into the differential equation:

[tex]\[ y'' + 4y' - 12y = 0 \][/tex]

[tex]\[ r^2e^{rx} + 4re^{rx} - 12e^{rx} = 0 \][/tex]

Since [tex]\( e^{rx} \)[/tex] is never zero, we can divide through by [tex]\( e^{rx} \)[/tex] to get the characteristic equation:

[tex]\[ r^2 + 4r - 12 = 0 \][/tex]

Now, we solve this quadratic equation for [tex]\( r \)[/tex]:

[tex]\[ r^2 + 6r - 2r - 12 = 0 \][/tex]

[tex]\[ r(r + 6) - 2(r + 6) = 0 \][/tex]

[tex]\[ (r - 2)(r + 6) = 0 \][/tex]

Setting each factor equal to zero gives us the possible values for [tex]\( r \)[/tex]:

[tex]\[ r - 2 = 0 \quad \Rightarrow \quad r = 2 \][/tex]

[tex]\[ r + 6 = 0 \quad \Rightarrow \quad r = -6 \][/tex]

Therefore, the values of [tex]\( r \)[/tex] for which [tex]\( y = e^{rx} \)[/tex] is a solution of the given differential equation are [tex]\( r = 2 \)[/tex] and [tex]\( r = -6 \).[/tex]

Evaluate each of the following to three significant figures, and express each answer in SI units using an appropriate prefix: (a) [4.86(10 6 )] 2 mm, (b) (348 mm) 3 , (c) (83 700 mN) 2 .

Answers

Answer:

a). [tex]4.86\times 10^{-15}[/tex] m

b). [tex]4.21\times 10^{-2}[/tex] m³

c). [tex]7.00\times 10^{3}[/tex] N²

Step-by-step explanation:

In this question we have to convert each option into SI units.

a). [tex]4.86(10^{-6})^{2}[/tex] mm

= [tex]4.86\times (10^{-12})\times (10^{-3} )[/tex] m

= [tex]4.86\times 10^{-15}[/tex] m

b). (348 mm)³

= [tex](348)^{3}\times (10^{-3})^{3}[/tex] m³

= [tex]42144192\times 10^{-9}[/tex] m³

= [tex]4.21\times 10^{-2}[/tex] m³

c). [tex](83700)^{2}\times (10^{-3})^{2}[/tex] N²

= [tex]700569\times 10^{4}\times 10^{-6}[/tex] N²

= [tex]7.00\times 10^{9}\times 10^{-6}N^{2}[/tex]

= [tex]7.00\times 10^{3}[/tex] N²

Find an equation for the plane tangent to the surface given by z = x 2 + y 4 + e xy at the point (1, 0, 2).

Answers

Answer:

Step-by-step explanation:

Let

                               [tex]f(x,y,z) = z-x^2-y^4-e^{xy}[/tex].

The partial derivatives of this function are

                                    [tex]\frac{\partial f}{\partial x} (x,y,z) = ye^{xy} - 2x \\ \frac{\partial f}{\partial y} (x,y,z) = xe^{xy} - 4y^3 \\\frac{\partial f}{\partial z} (x,y,z) = 1[/tex]

The tangent plane equation through a point [tex]A(x_1,y_1,z_1)[/tex] is given by                     [tex]f'_x (x_1,y_1,z_1)(x-x_1) + f'_y(x_1,y_1,z_1)(y-y_1) + f'_z(x_1,y_1,z_1)(z-z_1) = 0[/tex]

In this case, we have

                                  [tex]x_1 = 1, y_1 = 0, z_1 = 2.[/tex]

The values of the partial derivatives in this point are

                                 [tex]\frac{\partial f}{\partial x} (1,0,2) = 0 \cdot e^{0} - 2\cdot 1 = -2 \\ \frac{\partial f}{\partial y} (1,0,2) = 1 \cdot e^{0} - 0 = 1 \\ \frac{\partial f}{\partial y} (1,0,2) = 1[/tex]

So, the equation is

                        [tex]-2(x-1) + 1 \cdot (y-0) + 1\cdot (z-2) = 0[/tex]

Therefore, the equation for the plane tangent to the surface at the point [tex](1,0,2)[/tex] is given by

                                      [tex]2x-y-z = 0[/tex]

A manufacturer of chocolate chips would like to know whether its bag filling machine works correctly at the 439.0 gram setting. It is believed that the machine is underfilling the bags. A 47 bag sample had a mean of 433.0 grams. A level of significance of 0.05 will be used. Determine the decision rule. Assume the standard deviation is known to be 21.0. Enter the decision rule.

Answers

Final answer:

The decision rule in hypothesis testing is the criteria used to decide whether to accept or reject the null hypothesis. Given our level of significance and sample data, we reject the null hypothesis if the Z score (calculated as -1.92) is less than the critical value (-1.645). Hence, our decision rule is: if Z is less than -1.645, reject the null hypothesis.

Explanation:

The decision rule in hypothesis testing is the criteria that determines what the decision should be. In this case, the null hypothesis (H0) is that the mean weight of the chocolate chip bags is 439.0 grams, and the alternative hypothesis (H1) is that the mean weight is less than 439.0 grams because the machine is believed to be underfilling the bags.

Given a level of significance of 0.05 and a standard deviation of 21.0, we can calculate the z-score of the sample mean. Z = (Sample Mean - Population Mean) / (Standard Deviation / sqrt(Sample Size)), thus Z = (433.0 - 439.0) / (21.0 / sqrt(47)) = -1.92.

For a one-tailed test at a 0.05 level of significance, the critical value from the Z table is -1.645. The rule is to reject the null hypothesis if the calculated Z score is less than the critical value.

So the decision rule is: if Z is less than -1.645, reject the null hypothesis. In this case, as -1.92 is less than -1.645, we reject the null hypothesis. Hence, based on the sample, it can be said that the machine is underfilling the bags.

Learn more about Hypothesis Testing here:

https://brainly.com/question/31665727

#SPJ3

The cost, C (in dollars) to produce g gallons of a chemical can be expressed as C=f(g). Using units, explain the meaning of the following statements in terms of the chemical. (a) f(400)=700 The statement f(400)=700 means

Answers

Answer:

To produce 400 gallons of a chemical, it costs 700 dollars.

Step-by-step explanation:

We have that:

The cost, C (in dollars) to produce g gallons of a chemical can be expressed as C=f(g).

The interpretation is:

To produce g gallons of a chemical it costs C dollars.

So

f(400)=700

This means that to produce 400 gallons of a chemical, it costs 700 dollars.

Final answer:

The statement f(400)=700 means that the cost to produce 400 gallons of a chemical is 700 dollars. This cost function indicates the relationship between the number of gallons produced and the total cost, facilitating the calculation of expenses for chemical production.

Explanation:

The statement f(400)=700 means that to produce 400 gallons of a chemical, the cost is 700 dollars. The function f(g) represents the cost C, in dollars, to produce g gallons of the chemical. Therefore, when we input 400 into the function, it outputs the cost associated with producing that quantity, which in this case is 700 dollars.

Understanding the function as a rate of change, the cost to produce an additional gallon can be determined through ordinary algebra. If it were the case that this chemical firm is in a constant cost industry, where the cost per additional unit produced remains the same (e.g., 10 USD/oz), then this would simplify the exercise of calculating the cost for any number of gallons produced.

Conversion factors in chemistry are often used to relate amounts of substances in reactions, similarly in economics, conversion factors can tell us how much of a good can be bought or produced per unit of currency, like dollars per gallon, which is USD/unit.

Determine whether the distribution is a discrete probability distribution. x âP(x) 0 0.21 1 0.28 2 0.02 3 0.28 4 0.21 Is the distribution a discrete probabilityâ distribution? Why? Choose the correct answer below. A. No comma because the total probability is not equal to 1. B. No comma because some of the probabilities have values greater than 1 or less than 0. C. Yes comma because the distribution is symmetric. D. Yes comma because the probabilities sum to 1 and are all between 0 and 1 comma inclusive.

Answers

Answer:

D. Yes, because the probabilities sum to 1 and are all between 0 and 1, inclusive.

Step-by-step explanation:

0.21 + 0.28 + 0.02 + 0.28 + 0.21 = 1

All individual data are between 0 and 1. Data added up = 1

The true statement is (d) Yes, because the probabilities sum to 1 and are all between 0 and 1, inclusive.

For a distribution to be a discrete probability distribution, the following must be true

[tex]\sum P(x) =1[/tex]

So, we have:

[tex]\sum P(x) = 0.21 + 0.28 + 0.02 + 0.28 + 0.21[/tex]

Evaluate the sum

[tex]\sum P(x) =1[/tex]

The above statement shows that the distribution is a discrete probability distribution

Hence, the true statement is (d) Yes, because the probabilities sum to 1 and are all between 0 and 1, inclusive.

Read more about discrete probability distribution at:

https://brainly.com/question/15246027

Suppose a normally distributed set of data has a mean of 102 and a standard deviation of 20. Use the 68-95-99.7 Rule to determine to determine the percent of scores in the data set expected to be below a score of 151. Give your answer as a percent and includeas many decimal places as the 68-95-99.7 rule dictates. (For example, enter 99.7 instead of 0.997.)

Answers

Answer:

0.71%

Step-by-step explanation:

Given that a normally distributed set of data has a mean of 102 and a standard deviation of 20.

Let X be the random variable

Then X is N(102, 20)

We can convert this into standard Z score by

[tex]z=\frac{x-102}{20}[/tex]

We are to find the probability and after wards percentage of scores in the data set expected to be below a score of 151.

First let us find out probability using std normal table

P(X<151) = [tex]P(Z<\frac{151-102}{20} \\=P(Z<2.45)\\=0.5-0.4929\\\\=0.0071[/tex]

We can convert this into percent as muliplying by 100

percent of scores in the data set expected to be below a score of 151.

=0.71%

Jimmy decides to mow lawns to earn money. The initial cost of his lawnmower is %350. Gasoline and maintenance costs a $6 per lawn. a) Formulate a function C(x) for the total cost of mowing x lawns. b) Jimmy determines that the total-profit function for the lawn mowing business is given by p(x) = 9x - 350. Find a function for the total revenue from mowing x lawns. How much does jimmy charge per lawn? c) How many lawns must jimmy mow before he begins making a profit? a) Formulate a function C(x) for the total cost of mowing x lawns. b) Find a function for the total revenue from mowing x lawns R(x) = How much does Jimmy charge per lawn?

Answers

Answer:

Step-by-step explanation:

a) C(x) = 6x+350

b) Function for total revenue, R(x) = 15x & charge per lawn is $15.

c) Jimmy must mow approx 39 lawns before he begins making a profit.

How to formulate a function ?

Consider the initial cost of lawnmower is $350,

Gasoline and maintenance cost are $6 per lawn.

(a) To formulate a function C(x) for the total revenue of mowing x lawn, we use the given values than the function C(x) will be given by

C(x) = 6x+350

How to find the total revenue ?

Find the function for the total revenue from moving x lawns.

Recollect: P(x) = R(x)-C(x)

So, R(x) = P(x)+C(x)  ..............(1)

Substitute, P(x) = 9x-350 & C(x) = 6x+350 in (1) we get,

R(x) = 9x-350+6x+350

      = 15x

So, the total revenue = 15x

∴ Charge per lawn = R(x)/x = 15x/x = $15

How much lawn jimmy needs to mow before make profit ?

To find the number of lawn jimmy must mow before begins making a profit, we use P(x) = 0

∴ 9x-350=0

⇒x = 350/9

⇒x ≈ 39

Hence, the solution is x = 39 (approx)

Learn more about lawn problem here :

https://brainly.com/question/880576

#SPJ2

Other Questions
Consider chronological age, biological age, psychological age, and social age. When you are 70 years of age, in what order would you want these characteristics arranged, beginning with strength and progressing to weakness? Why did you select this arrangement? Management accounting information is most useful when it: Multiple Choice A. is timely. B. helps investors improve their decisions. C. is relevant and reported annually. D.helps creditors evaluate a company's perfo Which attitude cited by a 1973 report issued by the U.S, Fire Administration reflects the view of the average American citizen toward fire? Mrs. King gets a 15% discount on merchandise bought in the store where she works. Last week she bought several items that totaled $57.25 before the discount. How much did she have to pay using her discount? Round off the amount to the nearest cent. The systems support and _____ phase begins when a system becomes operational and continues until the system reaches the end of its useful life. Blood flows through a vessel at a particular flow rate and velocity. What happens to the velocity of the blood flow through that vessel after it constricts, narrowing its diameter? You may assume that the flow rate is unchanged. which angle is supplementary to DFA? Which of the following types of cloud platforms would a webmail service offered to the general public be considered?1. SaaS2. IaaS3. PaaS4. MaaS If Abrams Company has an inventory turnover of 7.3 and a receivables turnover of 9.6, approximately how long is its operating cycle? Sally is pushing a shopping cart with a force of 20 N. Because the wheels are stuck, the friction caused by the ground is exerting a force of 8 N in the opposite direction. Calculate the net force on the shopping cart including an arrow indicating what direction the shopping cart is going Which is the function of this structure? James,you need to cease tapping your pencil because other people are trying to concentrate..what clues in the sentence lead to your definition Use the DistributiveProperty to express28 + 56 I like math because I get it done fast. And I get A's. And I made myself and my parents do it. I make my parents do it and myself. Thats why I love math Write and solve a word problem to match the equation 6?=48 Heres another one thank u all for helping me. I really appreciate it! A synapse is a(n):_______.A. a chemical messenger that triggers muscle contractionsB. automatic response to sensory inputC. gap/junction between a sending neuron and a receiving neuronD. neural cable containing many axons 4/5 7/6 + 2/7 2 1/5 At 20C, the resistance of a sample of nickel is 525 . What is the resistance when the sample is heated to 70C? Let = 0.005866 at 20C. Explain please. A grocery cart with a mass of 15 kg is being pushed at constant speed up a 12 ramp by a force FP which acts at an angle of 17 below the horizontal. a. Find the work done by the force F P on the cart if the ramp is 6.5 m long. b. Find the work done by the force mg on the cart. Steam Workshop Downloader