Answer: It would increase.
Explanation:
The equation for determining the force of the gravitational pull between any two objects is:
[tex]F = G \frac{m1m2}{r^2}[/tex]
Where G is the universal gravitational constant, m1 is the mass of one body, m2 is the mass of the other body, and r^2 is the distance between the two objects' centers squared.
Assuming the Earth's mass but not its diameter increased, in the equation above m1 (the term usually indicative of the object of larger mass) would increase, while the r^2 would not.
Thus, it goes without saying that, with some simple reasoning about fractions, an increasing numerator over a constant denominator would result in a larger number to multiply by G, thus also meaning a larger gravitational strength between Earth and whatever other object is of interest.
Final answer:
If Earth's mass increased with its diameter unchanged, gravitational strength at its surface would also increase proportionally. The weight of objects on Earth would thus increase in direct relation to the mass increase.
Explanation:
If Earth's mass increased but its diameter remained unchanged, the gravitational strength near Earth's surface would increase proportionally to the mass increase. This is because gravitational force is directly proportional to the mass of the objects. For example, if Earth had 10 times its present mass but the same volume, a person's weight would increase by a factor of 10.
Conversely, with one-third of Earth's present mass, the gravitational force would reduce by a factor of 1/3, and a person would weigh only one-third as much as they currently do. Since the question implies that the gravitational force is what changes with the mass of Earth, we can infer that a greater mass leads to a stronger gravitational pull and thus an increase in weight for objects at the surface, assuming the radius stays constant.
A new ride being built at an amusement park includes a vertical drop of 71.6 meters. Starting from rest the ride vertically drops that distance before the track curves forward. If the velocity at the bottom of the drop is 10.0 m/s and the mass of the cart and passengers is 3,5x10^4kg, how much potential energy was converted into thermal energy? 2.3x10^7, 2.6x10^7, 4.3x107, 6.7x10^7
Answer:
We can conclude 2.3x10^7 J was converted to thermal energy
Explanation:
Energy Conservation
According to the law of conservation of energy, the total energy of an isolated system must be constant. If some kind of energy is 'lost', we know it was transformed into another type.
Let's check the conditions of the problem. The ride vertically drops a distance of 71.6 m starting from rest, and at the bottom of the drop, its speed is 10 m/s. Knowing the mass of the cart plus passengers is 3.5X10^4 kg, we compute the total energy at the top of the drop.
[tex]E=U+K[/tex]
Where E is the total energy (which must be conserved) at the top of the drop, U is the gravitational potential energy and K is the kinetic energy. We use the equations for each:
[tex]U=m.g.h[/tex]
[tex]\displaystyle K=\frac{mv^2}{2}[/tex]
[tex]\displaystyle E=m.g.h+\frac{mv^2}{2}[/tex]
At the top, the speed is 0, thus
[tex]\displaystyle E=m.g.h=(35000)(9.8)(71.6)=2.5X10^7\ J[/tex]
Now we compute the 'total' energy at the bottom (quoted because we know there is some mechanical energy loss in the drop)
[tex]\displaystyle E'=m.g.h'+\frac{mv'^2}{2}[/tex]
This time h'=0 and v=10 m/s, thus
[tex]\displaystyle E'=\frac{(35000)10^2}{2}=1.8x10^6\ J[/tex]
The mechanical energy at the top and the bottom are not the same, thus we can know part of it was converted to heat or thermal energy. We compute the difference
[tex]2.5x10^7\ J-1.8x10^6\ J=2.3x10^7\ J[/tex]
We can conclude 2.3x10^7 J was converted to thermal energy
The graph below shows the force required to stretch a spring various distances. Review the graph below.
A graph of Force versus Elongation. Elongation (m) is on the x axis and Force (N) is on the y axis. A straight line passes through the points 0 comma 0 and 10 comma 15.
What is the best approximate value for the elastic potential energy (EPE) of the spring elongated by 7.0 meters?
1.5 J
11 J
37 J
74 J
Answer:
37 J
Explanation:
Given:
A graph of force versus elongation in which a line passes through the points (0, 0) and (10, 15).
The x-axis represents elongation and y-axis represents force.
Elongation (x) = 7.0 m
Now, we know that the slope of a line of force versus elongation graph is the value of the spring constant.
Therefore, finding the slope of the line passing through (0, 0) and (10, 15), we get:
[tex]k=\frac{15-0}{10-0}=1.5\ N/m[/tex]
Therefore, the spring constant (k) = 1.5 N/m.
Now, the elastic potential energy (EPE) of the spring is given as:
[tex]EPE=\frac{1}{2}kx^2[/tex]
Plug in 1.5 for 'k' and 7.0 for 'x'. Solve for EPE.
[tex]EPE=\frac{1}{2}\times 1.5\times (7.0)^2\\\\EPE=\frac{1.5\times 49}{2}\\\\EPE=36.75\approx 37\ J[/tex]
Therefore, the best approximate value for the elastic potential energy (EPE) of the spring elongated by 7.0 meters is 37 J.
Two cans of spam with identical masses collide. Before the collision, the hickory smoke flavor is moving to the left at 4m/s while the hot and spicy flavor is moving to the right at 2 m/s. After the collision, the hickory smoke is moving to the left at 1.2 m/s. What is their final velocity of the hot and spicy? Is this collision elastic?
1) Final velocity: 0.8 m/s to the left
2) This is not an elastic collision
Explanation:
1)
We can solve this problem by applying the law of conservation of momentum: in fact, if there are no external forces, the total momentum of the two cans must be conserved before and after the collision.
Mathematically:
[tex]p_i = p_f\\mu_1 + mu_2 = mv_1 + mv_2[/tex]
where:
m is the mass of each can
[tex]u_1 = -4 m/s[/tex] is the initial velocity of the first can (we take to the left as negative direction)
[tex]u_2 = 2 m/s[/tex] is the initial velocity of the second can (to the right, positive)
[tex]v_1 = -1.2 m/s[/tex] is the final velocity of the first can (the hickory one)
[tex]v_2[/tex] is the final velocity of the 2nd can (the hot and spicy one)
Re-arranging the equation and solving for v2, we find:
[tex]v_2 = u_1 + u_2 - v_1 = (-4) + (+2) - (-1.2)=-0.8 m/s[/tex]
So, the final velocity of the hot and spicy can is 0.8 m/s to the left.
2)
There are two types of collisions in physics:
Elastic collision: the total kinetic energy is conservedInelastic collision: the total kinetic energy is not conservedIn order to check if this collision is elastic or not, we need to compare the kinetic energy before the collision to the kinetic energy after the collision.
Before the collision:
[tex]K_i = \frac{1}{2}mu_1^2 + \frac{1}{2}mu_2^2 = \frac{1}{2}m(-4)^2+\frac{1}{2}m(2)^2=10m[/tex]
After the collision:
[tex]K_f = \frac{1}{2}mv_1^2 + \frac{1}{2}mv_2^2 = \frac{1}{2}m(-1.2)^2+\frac{1}{2}m(-0.8)^2=1.04m[/tex]
We see that the final kinetic energy is less than the initial kinetic energy: part of the kinetic energy has been converted into other forms of energy during the collision, therefore this is NOT an elastic collision.
Learn more about collisions:
brainly.com/question/13966693#
brainly.com/question/6439920
#LearnwithBrainly
What does the electron do in an atom?
Answer:
Electrons are the negatively charged particles of an atom.Together,all of the electrons of a atom create a negitive charge that balances the positive charge of the protons
Explanation:
Two bodies, one hot and one cold, are kept in vacuum. What will happen to the temperature of the hot body after some time?
Answer:
There are two possibilities:
If the two bodies are in touchIf the two bodies are untouchedAccording to 1st possibility :
If the bodies are in touch then the temperature of hot body decreases and the temperature of cold body increases due to heat transfer and at a point the temperature of two bodies becomes equal.
According to 2nd possibility:
There will not be change in the temperature of two bodies. There will not heat transfer here.
Note: Heat transfers from hot body to cold body.
Hope it helps :)
Two bodies, one hot and one cold are kept in a vacuum the temp of hot bodies may decrease or remain unchanged.
What is temperature?Temperature is the degree of hotness or coldness.heat always flows from the higher body to the lower body temperature.Heat needs a medium to transfer, it cannot travel in a vacuum.Heat can travel through conduction, convection, and radiation.Two possible conditions for temperature change.
If two bodies are in contact then the temperature of the higher body will decrease.
If two body is not in conduct, heat cannot be transferred so the temperature cannot change.
Learn more about temperature here:-https://brainly.com/question/24746268
#SPJ2
5. What is the kinetic energy of a 2,000 kg car that is traveling
10 m/s?
The kinetic energy of the car is calculated using the formula KE = 1/2 * m * v^2, where m is mass and v is velocity. Substituting the given values yields a kinetic energy of 100,000 Joules for the car.
Explanation:The kinetic energy of an object can be calculated using the formula: KE = 1/2 * m * v^2, where 'm' stands for mass and 'v' stands for velocity. In this scenario, the mass (m) of the car is 2,000 kg and the velocity (v) is 10 m/s. Plugging these values into the formula we get: KE = 1/2 * 2000 kg * (10 m/s)^2. Therefore, the kinetic energy of the car is 100,000 Joules.
Learn more about Kinetic Energy here:https://brainly.com/question/26472013
#SPJ12
A monkey running through the jungle goes 0.198 km straight to the East, then turns 15.8° deflection from straight East toward the South, and then goes 145 m in a straight line in the diagonal direction he is now facing. What is the displacement of the monkey? (put your answer in standard units)
Answer:
[tex]|\vec r|=339.82\ m[/tex]
[tex]\theta=-6.67^o[/tex]
Explanation:
Displacement
It's a vector magnitude that measures the space traveled by a particle between an initial and a final position. The total displacement can be obtained by adding the vectors of each individual displacement. In the case of two displacements:
[tex]\vec r=\vec r_1+\vec r_2[/tex]
Given a vector as its polar coordinates (r,\theta), the corresponding rectangular coordinates are computed with
[tex]x=rcos\theta[/tex]
[tex]y=rsin\theta[/tex]
And the vector is expressed as
[tex]\vec z=<x,y>=<rcos\theta,rsin\theta>[/tex]
The monkey first makes a displacement given by (0.198 km,0°). The angle is 0 because it goes to the East, the zero-reference for angles. Thus the first displacement is
[tex]\vec r_1=<0.198cos0^o,0.198sin0^o>=<0.198,0>\ km=<198,0>\ m[/tex]
The second move is (145 m , -15.8°). The angle is negative because it points South of East. The second displacement is
[tex]\vec r_2=<145cos(-15.8^o),145sin(-15.8^o)>=<139.52,-39.48>\ m[/tex]
The total displacement is
[tex]\vec r=<198,0>\ m+<139.52,-39.48>\ m[/tex]
[tex]\vec r=<337.52,-39.48>\ m[/tex]
In (magnitude,angle) form:
[tex]|\vec r|=\sqrt{337.52^2+(-39.48)^2}=339.82\ m[/tex]
[tex]\boxed{|\vec r|=339.82\ m}[/tex]
[tex]\displaystyle tan\theta=\frac{-39.48}{337.52}=-0.1169[/tex]
[tex]\boxed{\theta=-6.67^o}[/tex]
A motorcycle is traveling along a highway at 26 m/s. How far does the motorcycle travel in 15 s?
The total distance travelled will be 390 m.
We have a motorcycle travelling on a Highway.
We have to find the distance travelled by the motorcycle in 15 seconds.
What is distance ?The distance covered by the body moving with speed 's' in time 't' is given by the relation -
Distance (d) = s x t
According to the question -
Average speed = s = 26 m/s
Time = t = 15 s
Distance = s x t = 26 x 15 = 390 m
Therefore, the total distance travelled will be 390 m.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/21092131
#SPJ2
4. A ball has 17J of kinetic energy (KE) and its mechanical energy is 25J. What is the speed of the
ball? The ball has a mass of 3.2 kg.
Answer:3.25914099112
Explanation:
Do you have the formula? I pretty sure this is correct but I’m not sure
Speed of ball is 3.2 m/s (Approx.)
Given that;
Kinetic energy (KE) = 17 J
Mechanical energy = 25 J
Mass of ball = 3.2 kg
Find:
Speed of ball
Computation:
Kinetic energy (KE) = [1/2][mv²]
17 = [1/2][(3.2)v²]
17 = [1.6][v²]
v² = 17 / 1.6
v² = 10.625
v = √10.625
v = 3.2596
Speed of ball (v) = 3.2 m/s (Approx.)
Learn more:
https://brainly.com/question/12669551?referrer=searchResults
Sally and Conrad were arguing over the difference between a transverse wave and a longitudinal wave. Sally said that mechanical waves could be either transverse or longitudinal. Conrad said that sound waves were longitudinal and not transverse. Who is correct and why?
Group of answer choices
Neither are correct.
Only Conrad is correct because sound waves are not transverse waves.
Only Sally is correct because longitudinal waves and transverse waves are mechanical waves.
Both are correct since sound waves are mechanical waves.
Both are correct since sound waves are mechanical waves.
Option: D.
Explanation:
A wave is a recurring event that transfers energy through vibrations. It caused by the disturbance movement in a medium. The medium can be solid, liquid or gas and it can come in many forms and shapes.
If the particles in the medium moved in the perpendicular direction to the wave is called transverse wave and if those particles moved in the parallel direction to the wave then it is a longitudinal wave.
Mechanical waves require a medium to transfer that energy. Moreover, based on the medium properties ( inertial and elastic) it can be changed as either transverse or longitude.
In, sound wave the particles will move in the parallel direction to the wave. Also, it comes under mechanical wave since it requires an air medium to travel.
What is the mass of a baseball thrown at 25 m/s resulting in a momentum of 10 kg·m/s?
Answer: m = 0.4 kg
Explanation: Momentum is the product of mass and velocity also expressed in this equation:
p = m x v
Derive to find m
m = p / v
= 10 kg•m/s / 25 m/s
= 0.4 kg
The mass of baseball is 0.4 kg.
Given data:
The velocity of the baseball is, v = 25 m/s.
The resulting momentum of baseball is, p = 10 kg-m/s.
The momentum of any object is defined as the impact produced by the applied force. Hence it is expressed at the product of mass and velocity. The expression for the momentum is,
[tex]p = mv[/tex]
here, m is the mass of baseball.
Solving as,
[tex]10 = m \times 25\\\\m = 0.4 \;\rm kg[/tex]
Thus, we can conclude that the mass of baseball is 0.4 kg.
Learn more about the momentum here:
https://brainly.com/question/19689434
PLZ HELP ME 3 MIINS 50 POINTS AND BRAINLEIST
Juan uses a lever to lift a rock. He places the rock on the short arm of the lever and pushes down on the other arm of the lever. He applies 30 N of force over a distance of 1 m. The other end of the lever moves in the opposite direction and raises the rock a distance of 0.2 M. What is the weight (force) of the rock
What is the mechanical advantage of the lever in question 1?
Answer:
I calculated the mechanical advantage. It is in the picture above
but I haven't gotten the weight but I know the general formula of weight 2 be m×g (mass ×gravity) I will get back 2 u once I solve it plz don't be offended and plz Mark me brainliest answer
Juan uses a lever to lift a rock. The weight of the rock can be calculated by multiplying the force applied on the lever arm by the mechanical advantage of the lever. The mechanical advantage is calculated by dividing the length of the effort arm by the length of the resistance arm.
Explanation:In this question, Juan uses a lever to lift a rock. He applies a force of 30 N over a distance of 1 m on one arm of the lever. The other end of the lever moves in the opposite direction and raises the rock a distance of 0.2 m.
To find the weight (force) of the rock, we can use the principle of moments. The weight of the rock can be calculated by multiplying the force applied on the lever arm by the mechanical advantage of the lever.
The mechanical advantage of a lever is calculated by dividing the length of the effort arm by the length of the resistance arm. In this case, the length of the effort arm is 1 m and the length of the resistance arm is 0.2 m, so the mechanical advantage is 1/0.2 = 5.
Therefore, the weight of the rock is 30 N * 5 = 150 N.
Learn more about Lever here:https://brainly.com/question/18937757
#SPJ3
A cart rolling down an incline for 5.0 seconds has an acceleration of 4.0 m/s .If the cart has an initial speed of of 2.0 m/s ,what’s its final speed.
Applying
v=u+a.t
(all the symbols are bearing their conventional meaning)
Here,u=2ms−1,t=5,a=4ms−2
So,v=2+4⋅5=22ms−1
Mark as BrainliestAnswer:
22m/s
Explanation:
V = u + at
= 2 + ( 4x5)
= 2 + 20
= 22m/s
if a mint is on a turn table that is rotating at 34 RPM’s, and is 23 (cm) away from the center of the record, what is the Tangential Acceleration?
Answer:
The tangential acceleration is zero
Explanation:
Tangential Acceleration
It's a measure of how fast is the tangential velocity changing when the object has rotational motion. It's perpendicular to the centripetal acceleration and equal to the product of the angular acceleration by the radius of rotation. In a uniform circular motion, the angular speed is constant, i.e. the angular acceleration is zero.
If the tangential acceleration was different from zero, the rotating object would change its angular and tangential velocities.
The turntable is rotating at a constant speed, so, regardless of the position of the mint, its tangential acceleration is zero
What is the fuel of an aeroplane.?
Answer: Jet fuel
Explanation:
Jet fuel is a clear to straw-colored fuel, based on either an unleaded kerosene (Jet A-1), or a naphtha-kerosene blend (Jet B). Similar to diesel fuel, it can be used in either compression ignition engines or turbine engines.
Answer:
the fuel of an aeroplane is called gasoline
Two golf balls with the same mass were hit at the same time. Golf ball A went a shorter distance than golf ball B. What could be a reason that this happened?
Golf ball B experienced more friction.
Golf ball A experienced less friction.
Golf ball B was hit with a weaker force.
Golf ball A was hit with a weaker force.
Answer:
Golf ball A was hit with a weaker force
Explanation:
Golf ball B went a larger distance than golf ball A, so we could think friction affected golf ball A rather than golf ball B. That is why the first two choices are wrong.
The strongest forced applied made golf ball B go further.
Golf ball A went a shorter distance than golf ball B because Golf ball A was hit with a weaker force. Therefore, option D is correct.
What is acceleration?The rate of change of an object's velocity with respect to time is known as acceleration. The acceleration exhibits both magnitude and direction so it is a vector.
The second derivative of position w.r.t. time can be used to calculate the acceleration and the 1st derivative of the object's velocity w.r.t. time.
The net of all external forces acting in magnitude is directly proportional to this net resulting force. The magnitude of the acceleration is inversely proportional to the object's mass. From Newton's second law of motion we can deduce the acceleration:
F = ma ⇒ a = F/m
As both balls have the same mass so the ball hit with lesser force will have less acceleration and cover a shorter distance.
Learn more about acceleration, here:
brainly.com/question/3046924
#SPJ3
The work done on a box is 532 joules. The force applied to the box was 48 N. What was the displacement of the box? *
Explanation:
Work = force × displacement
532 J = 48 N × d
d ≈ 11 m
The word centripetal means"
_______ seeking."
Answer here
Answer:
moving or tending to move toward a center.
Explanation:
the force that is necessary to keep an object moving in a curved path and that is directed inward toward the center of rotation a string on the end of which a stone is whirled about exerts centripetal force on the stone — compare centrifugal force.
Answer: center-seeking
Explanation: a p e x
Plate A and Plate B are both made of continental plate material where they touch. What will happen as the plates press together?
Answer:
Plate A and Plate B are both made of continental plate material where they touch. What will happen as the plates press together? The edges of both plates will be pushed upward as the plates continue to move toward each other.
Explanation:
When two continental plates collide with each other and they fold the rock at the boundary, lifting up, and leading to the formation of mountains and mountain ranges.
What are continental plates?Tectonic plates are pieces of the crust of the earth and the uppermost mantle, together referred to as the lithosphere. The plates are around 100 km thick and consist of two types of material: oceanic crust and continental crust which generally have silicon and aluminum.
When two continental plates collide, the edge of one plate is thrust onto that of the other plate. The rocks in the lower slab undergo changes in their mineral content due to heat and pressure and will probably become exposed at the surface.
Rocks changed to new mineral assemblages due to changing temperatures and pressures are known as metamorphic. The regions of the crust undergo melting and subsequent extrusion of melt magma appears at the surface as volcanic rocks that rise to form granites at high crustal levels lead to the formation of mountains.
Learn more about the continental plate, here:
https://brainly.com/question/3994513
#SPJ2
why is it important for digestive system functions that mucous membranes can secrete and absorb susbstances?
Answer:
It pushes food through the GI tract. The inside of GI tract is lined with mucous membranes. Mucous membranes are moist tissues that can secrete and absorb substances. The ability to secrete and absorb substances is necessary for the functions of the digestive system.
Explanation:
Can I have brainliest?
Mucous membranes in the digestive system secrete mucus and absorb nutrients, which is vital for its functioning.
Explanation:The mucous membranes lining the digestive system have the ability to secrete and absorb substances, which is important for the functioning of the digestive system.
They secrete mucus that lubricates and protects the digestive tract, preventing damage from harsh stomach acids and facilitating the smooth movement of food.
They also absorb nutrients and water from the digested food, allowing the body to efficiently extract energy and essential substances.
Learn more about mucous membranes in the digestive system here:https://brainly.com/question/7117483
#SPJ2
describe in detail and example of a character from a television program movie or book you have recently read that is faced with physical needs in the plot please provide the name of the character what book movie or television program you saw them in and describe the context of the situation
Explanation:
I have watched "Sherlock Holmes". It is a story chain of various deeds of a British detective. He uses his senses with full confidence in order to solve various puzzles. He uses detailed observation of any incident or any character.
He collects information from his logic and creates his own story which seems to be fit in given circumstances. He uses deductive reasoning in order to reach to a conclusion. There are various scenes in this whole series where he can tell the whole schedule of a person just simply observing his/her coat.
I remember a scene in which a person comes to him. He just looks at him for few seconds. Sherlock notices tea stain on his coat. In the very next minute, Sherlock asks him, how bad was his morning? The person gets confused and surprised also.
He asks the reason behind Sherlock's question. Sherlock tells him a story based on his deductive reasoning. He tells him about the noticing of tea stain. He also explains size and configuration of that stain. He also elaborates that such dimensions can be obtained only in a fast moving object when someone has fight at the same time.
He also tells him some other details. All these were based on his extreme senses and his detailed perceptions about the circumstances. Sherlock considers his perceptions as real and tests them according to his knowledge and logical reasoning. He mixes all these things with his deductive reasoning which provides him a meaningful story.
A test taker makes an estimate for a 30–second time interval. The estimate is 34.5 seconds. What is the percent error in this example?
Answer:
Its a 30 second interval
Explanation:
Picture attached please help! 2 different questions!
Wave A would have higher amplitude
Hope this helps :D
Wave A has higher amplitude because it is stretched out and the energy of the sound wave is loud
P.S. hope this is helpful
Explanation:
AS AIRPLANE WENT FROM 120 m/s to 180 m/s in 4.0 seconds what is the acceleration
Answer:15metre per second squ
I
Explanation:
acceleration=(final velocity-initial velocity)÷t
acceleration=(180-120)÷4
acceleration=60÷4
acceleration=15 metre per second square
In which situation is no work considered to be done by a force?
OA when the angle between the force and displacement is 180°
O B. when the angle between the force and displacement is 90°
Oc when the angle between the force and displacement is 45°
OD. when the angle between the force and displacement is 0°
Answer:
O B. when the angle between the force and displacement is 90°
Explanation:
work defined as [tex]w = f cos Ф * d[/tex]. work can only be done if object moves(displacement) in the direction of force. now a quick one. if you since the varrious angles into the cosine, you would see that Cos 90 will give zero which implies that no work is done. Again, angle means it is perpendicular and so it is not in the direction of force.If the sine of an angle is 4/7 what is the cosine of its complement.
Answer: 0.57
Explanation:
Let's begin by explaining that two angles are complementary when they sum is [tex]90\°[/tex]:
[tex]\theta + \alpha=90\°[/tex]
Having this clear, let's find [tex]\theta[/tex] from the following trigonometric function:
[tex]sin \theta=\frac{4}{7}[/tex]
[tex]\theta=sin^{-1} (\frac{4}{7})=34.84 \°[/tex]
Now that we have the value of [tex]\theta[/tex], let's find [tex]\alpha[/tex]:
[tex]\alpha=90\°-\theta[/tex]
[tex]\alpha=90\°-34.84 \°[/tex]
[tex]\alpha=55.15\°[/tex] This is the complement of angle [tex]\theta[/tex]
Then, the cosine of the complement [tex]\alpha[/tex] is:
[tex]cos \alpha=cos(55.15\°)[/tex]
[tex]cos \alpha=0.57[/tex] This is the answer
Heated air moves from baseboard heaters to the rest of a room in a process called a radiation b conduction c insulation d convection
D. convection
Hope this helps :D
What is the relationship between the masses of the objects and the gravitational force between them?
Answer:
Gravitational force is directly proportional to the masses of the objects.
Explanation:
Which two Bible verses state that Jesus Christ holds together everything in the universe by His power?
John 3:16
Colossians 1:17
Psalm 119:56
Hebrews 13
Answer:
Colossians 1:17
Explanation:
He is before all things, and in him all things hold together.
Answer:
John 3:16
Colossians 1:17
Explanation:
Which of the following is a benefit to exericse?
Answer: Health is a benefit it can reduce the risk of heart disease as well as help you control your weight. It can also help you improve your mental health and mood. It can also help keep your thinking, learning, and judgement skills sharp as you age.
Which of the following is a benefit to exericse?
A. Fight depression
B. Sleep better
C. Concentrate
D. All of the above.
The answer is D