Answer:
light to chemical
Explanation:
What is the correct order of steps for the students to take?
Answer:
B.
Explanation:
4Fe + 3O2 → 2Fe2O3
Iron combines with oxygen to form rust. Given the chemical reaction, how many grams of rust would be produced if 3 grams of reactants were consumed?
A) 0 grams
B) 1 gram
C) 3 grams
D) 7 grams
Answer:
C, 3g
Explanation:
4Fe + 3O2 = 3g
Since the number of atoms are same on the both sides of equation same amount of rust will be produced. Therefore 3g of Fe2O3 will be produced.
Answer:
the answer is 3 grams
Which of these is a physical property?
malleable
easy to digest
does not burn
becomes moldy quickly
ty ^^
Answer: malleable
Explanation:
Chemical property is defined as the property of a substance which is observed during a reaction where the chemical composition identity of the substance gets changed.
Physical property is defined as the property which can be measured and whose value describes the state of physical system. For Example: State, density etc.
Malleable is a physical property as it is the ability to be beaten into sheets which means only shape changes.
Easy to digest is a chemical property as it requires oxidation of food.
Does not burn easily is a chemical property as it requires oxidation .
Becomes moldy quickly is a physical property as it requires oxidation .
Answer:
malleable
Explanation:
i did the test and got it correct
protons and neutrons are made from which of the following?
hadrons
down quarks only
up quarks and down quarks
up quarks only
Answer: it would be c. Protons are made of two Up and one Down quark. The neutron is made of two Down and one Up quark
Protons and neutrons are made up from quarks and in protons two up quarks & in neutron two down quarks are present.
What are quarks?Quarks are the fundamental or elementary particle of any matter present in the system, and quarks are combined together for the formation of a hadron.
Protons and neutrons are the examples of hadrons which are also made up of quarks.
Protons are formed by the combination of two ups quarks and one down quark.Neutrons are formed by the combination of two dowm quarks and one up quark.Hence protons and neutrons are formed by the quarks.
To know more about quarks, visit the below link:
https://brainly.com/question/10253303
Need help in this problems
Answer:
Q1: 2.068 atm.
Q2: 0.7346 atm.
Q3: 336.7 mm Hg.
Q4: 393.7 K = 120.7 °C.
Q5: 694.1 mm Hg.
Q6: 397.1 K.
Q7: 676.5 mm Hg.
Q8: 72.68 kPa.
Explanation:
Gay-Lussac's law states that the pressure of a given mass of gas varies directly with the absolute temperature of the gas (K), when the volume is kept constant.It can be written as: P/T = constant.So, for two different T and P we can express the relation as:P₁T₂ = P₂T₁.
Q1:
P₁ = 2.0 atm, T₁ = 20.0°C + 273 = 293 K.
P₂ = ??? atm, T₂ = 30.0°C + 273 = 303 K.
∴ P₂ = P₁T₂/T₁ = (2.0 atm)(303 K)/(293 K) = 2.068 atm.
Q2:
P₁ = 0.55 atm, T₁ = 25.0°C + 273 = 298 K.
P₂ = ??? atm, T₂ = 125.0°C + 273 = 398 K.
∴ P₂ = P₁T₂/T₁ = (0.55 atm)(398 K)/(298 K) = 0.7346 atm.
Q3:
P₁ = 87.0 mm Hg, T₁ = 77.0 K.
P₂ = ??? atm, T₂ = 25.0°C + 273 = 298.0 K.
∴ P₂ = P₁T₂/T₁ = (87.0 mm Hg)(298 K)/(77 K) = 336.7 mm Hg.
Q4:
P₁ = 248.0 kPa, T₁ = 10.0°C + 273 = 283 K.
P₂ = 345.0 kPa, T₂ = ??? K.
∴ T₂ = P₂T₁/P₁ = (345.0 kPa)(283 K)/(248.0 kPa) = 393.7 K - 273 = 120.7 °C.
Q5:
P₁ = 750.0 mm Hg, T₁ = 22.0°C + 273 = 295 K.
P₂ = ??? mm Hg, T₂ = 0.0°C + 273 = 273 K.
∴ P₂ = P₁T₂/T₁ = (750.0 mm Hg)(273 K)/(295 K) = 694.1 mm Hg.
Q6:
P₁ = 599.0 mm Hg, T₁ = 40.0°C + 273 = 313 K.
P₂ = 760.0 mm Hg, T₂ = ??? K.
∴ T₂ = P₂T₁/P₁ = (760.0 mm Hg)(313 K)/(599 mm Hg) = 397.1 K.
Q7:
P₁ = 800.0 mm Hg, T₁ = 323 K.
P₂ = ??? mm Hg, T₂ = 273.15 K.
∴ P₂ = P₁T₂/T₁ = (800.0 mm Hg)(273.15 K)/(323 K) = 676.5 mm Hg.
Q8:
P₁ = 30.0 kPa, T₁ = - 150.0°C + 273 = 123 K.
P₂ = ??? kPa, T₂ = 25.0°C + 273 = 298 K.
∴ P₂ = P₁T₂/T₁ = (30.0 kPa)(298 K)/(123 K) = 72.68 kPa.
Which energy source contributes to the greatest emissions of gases in the environment during the energy production process
Answer:
Natural gas, emitting fewer harmful chemicals into the atmosphere than other fossil fuels, can help to mitigate some of these environmental issues. These issues include: Greenhouse Gas Emissions. Smog, Air Quality and Acid Rain
Explanation:
Final answer:
Coal combustion, part of the fossil fuels category, contributes the most to greenhouse gas emissions during energy production, particularly carbon dioxide (CO2). However, renewable energy alternatives like solar and wind power present viable solutions to reduce these emissions.
Explanation:
The energy source that contributes to the greatest emissions of gases in the environment during the energy production process is the burning of fossil fuels, notably coal, oil, and natural gas. This is primarily due to their capacity to release significant amounts of carbon dioxide (CO2) when combusted. Coal is the most carbon-intensive of these fuels, especially when used for electricity generation, leading to the highest CO2 emissions per unit of energy produced.
Coal combustion not only releases more greenhouse gas carbon dioxide per unit of energy output than any other energy-yielding process but also produces pollutants like fly ash and sulfur dioxide. However, innovations in renewable energy sources such as solar and wind power are emerging as viable alternatives to reduce reliance on fossil fuels and mitigate greenhouse gas emissions.
Given the significant environmental impact of burning fossil fuels, transitioning to renewable energy sources, enhancing energy efficiency, and investing in green technology research and development are critical steps toward combating climate change and reducing global greenhouse gas emissions.
If 6.1 moles of copper react completely with 6.1 moles of oxygen, what is the mole ratio for the compound
Answer:
CuO with (1: 1) mole ratio.
Explanation:
When 6.1 moles of copper react completely with 6.1 moles of oxygen.They are equimole reactants with a (1: 1) mole ratio.Then, the compound has the molecular formula CuO.Can you accurately determine a person genotype just by observing their phenotype
Answer:
Yes.
Explanation:
All of the heterozygous pairs are either really close or the same as the homozygous.
a set of equations that represent a real world process is a what model
is that all the information i can get for the quistion
Answer:
The correct answer is a mathematic model.
Explanation:
A mathematical model constitutes an abstract representation of a certain aspect of reality, and has a structure that is formed by the elements that characterize the aspect of modeled reality and by the relationships between these elements called equations. Once the mathematical model is constructed, it is possible to extract from it properties and characteristics of the relations between the elements that would otherwise remain hidden.
Have a nice day!
Element Y is composed of three isotopes; Y-20 is 15.00%, Y-22 is 50.00%, and Y-24 is 35.00%. What is the element Y’s relative atomic mass
We take in account the following formula tot determine the relative atomic mass:
Relative atomic mass = atomic mass of isotope (1) × abundance of isotope (1) +
atomic mass of isotope (2) × abundance of isotope (2) + ... and so on
For element Y we have:
Relative atomic mass of Y = 20 × 0.15 + 22 × 0.5 + 24 × 0.35 = 22.4
which number label represents the nucleus? 6,5,3,2
Answer:
5
Explanation:
Nucleus is the center or "CEO" of the cell, that holds the cell's DNA and controls the cells' function.
Number 6 label in the given figure represents the Nucleus. Hence Option (A) is correct.
What is Nucleas ?
A nucleus, as related to genomics, is the membrane-enclosed organelle within a cell that contains the chromosomes.
An array of holes, or pores, in the nuclear membrane allows for the selective passage of certain molecules (such as proteins and nucleic acids) into and out of the nucleus.
Therefore, Number 6 label in the given figure represents the Nucleus. Hence Option (A) is correct.
Learn more about Cell here ;
https://brainly.com/question/3142913
#SPJ2
what is the diffrence between a mixture and a compound
A compound is a substance made up of atoms of two or more different elements joined by chemical bonds. A mixture is a combination of two or more substances that are not chemically combined.
Answer:
a mixture has multiple atoms or chemicals in it a compound is one solid atom packed tokether to creatat a compound
Explanation:
How do cells reproduce? ∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵
Answer:
Cells divide to reproduce. There are two primary methods used, one for somatic cells, which compose the organism’s body, and one for reproductive cells, or gametes.
Scientists call the process of somatic cell division mitosis. Mitosis has six distinct steps in which the cell organizes and copies the DNA in the nucleus. Once copied, each new cell has its own copy of the DNA. The six steps of mitosis are prophase, prometaphase, metaphase, anaphase, telophase and cytokinesis. Some authorities consider the non-dividing portion of the cell’s lifecycle, known as interphase, to be one of seven steps involved in mitosis; however, interphase cells are not actively dividing.
Sex cells, such as sperm or eggs, must divide differently. Sex cells only possess one-half of the DNA that makes up a new animal. That way, when they combine, the resulting organism gets half of its DNA from its mother and half from its father. Because sex cells only want half of the DNA in each cell, they go through a different division process called meiosis. In meiosis, the cells split a second time, which yields four daughter cells rather than two as with mitosis; however, this provides each daughter cell with 23 chromosomes in contrast to the 46 chromosomes in somatic cells.
What is the percent by mass of oxygen in carbon dioxide (CO2)?
Use
%ELEMENT=TOTAL MASS OF ELEMENT IN COMPOUND/MOLAR MASS OF COMPOUND -X100
27.29%
57.12%
72.71%
79.99%
Answer:
= 72.73%
Explanation:
The percentage by mass of an element is given by;
% element = total mass of element in compounds/molar mass of compound × 100
The mass of oxygen in carbon dioxide = 32 g
Molar mass of CO2 = 44 g
Therefore;
% of O2 = 32/44 × 100%
= 72.73%
Answer:
C
Explanation:
72.71%
what type of solar radiation is the most powerful
Answer:
Gamma Rays are the most powerful kind of rays :p
Gamma rays are the most powerful type of solar radiation! If you need to know more on how harmful they are and what they can do let me know!
Which title is most appropriate for this table?
A: uses of functional groups involving oxygen
B: Natural sources of functional groups involving oxygen
C: Uses of functional groups involving halides and amines
D: Natural sources of functional groups involving halides and amines
a.uses of functional groups involving oxygen
Answer : The correct option is, (A) uses of functional groups involving oxygen.
Explanation :
(1) [tex]R-OH[/tex] : It belongs to an alcoholic functional group in which the the [tex]-OH[/tex] group is directly attached to the alkyl group of carbon.
(2) [tex]R-O-R^'[/tex] : It belongs to an ether functional group in which the the oxygen is directly attached to the two alkyl group of carbon.
(3) [tex]R-CO-R^'[/tex] : It belongs to ketone functional group in which the the [tex]-CO[/tex] group is directly attached to the two alkyl group of carbon.
(4) [tex]R-CHO[/tex] : It belongs to an aldehyde functional group in which the the [tex]-CHO[/tex] group is directly attached to the alkyl group of carbon.
(5) [tex]R-COOH[/tex] : It belongs to carboxylic acid functional group in which the the [tex]-COOH[/tex] group is directly attached to the alkyl group of carbon.
(6) [tex]R-COO-R^'[/tex] : It belongs to ester functional group in which the the [tex]-COO[/tex] group is directly attached to the two alkyl group of carbon.
[tex]R-NH_2[/tex] : It belongs to an amine functional group in which the the [tex]-NH_2[/tex] group is directly attached to the alkyl group of carbon.
[tex]R-X[/tex] : It belongs to halide functional group in which the the [tex]-X[/tex] group (all the halogens) is directly attached to the alkyl group of carbon.
From the above and from the question we conclude that, some uses of functional groups are given in which the an oxygen are present in all the functional groups.
Hence, the correct option is, (A) uses of functional groups involving oxygen.
if 2.0 g of hydrogen sulfide, H2S(g) reacts with 5.0 g of sodium hydroxide what mass of the excess reactant is present when the reaction is complete
Answer: iits 9.g
Explanation:
How are the positive and negative areas created a molecule? Why is this important?
Answer:
The unequal sharing of electrons gives the water molecule a slight negative charge near its oxygen atom and a slight positive charge near its hydrogen atoms. When a neutral molecule has a positive area at one end and a negative area at the other, it is a polar molecule.
Hope this helps
How do you write 145,000,000 in scientific notation?
Answer:
[tex]\boxed{1.45 \times 10^{8}}[/tex]
Explanation:
A number in scientific notation has the form N × 10ⁿ
where N is a decimal number called the mantissa and n is an integer called the exponent.
We must have 1 ≤ N < 10
Step 1. Determine the mantissa
Move the decimal place to the left to create a new number between 1 and 10.
145 000 000 ⟶ 1.450 000 00; N = 1.45
Step 2. Determine the exponent.
The exponent is the number of times you moved the decimal to get the mantissa.
You moved the decimal eight places to the left, so the exponent n = 8.
Step 3. Write the number in scientific notation
The number in scientific notation is [tex]\boxed{1.45 \times 10^{8}}[/tex].
Elaborate on the role of activation energy in chemical reactions. A) Decreasing the activation energy leads to higher randomness within the reaction and an increased reaction rate. B) Activation energy is the minimum energy colliding reactants need to combine and for the chemical reaction to occur. C) The activation energy and randomness indicate the reduced likelihood that the barrier is overcome and a decreased rate. D) Higher activation energy indicates a higher randomness and the energy barrier is overcome with an increased reaction rate.
B is right answer ithink bro/sis
Answer:
A and B
Explanation:
The activation energy is the minimum energy necessary for the reaction to happen. It is a barrier, the reaction only occurs if the reactants have that energy.
As higher is the activation energy, as difficult is to the reaction happens, and because of that, the reaction rate will be small. The rate indicates the reaction velocity, which is the velocity of the collisions of the molecules, with more collisions, higher randomness is presented, and higher is the velocity.
A) Correct. As less energy is necessary, as higher is the velocity of the reaction, so the randomness and the rate will increase.
B) Correct. Is the definition of activation energy.
C) Incorrect. They indicate the rate of the reaction, and how easy or not it will be to the reaction happen.
D) Incorrect. As higher is the activation energy, as low is the randomness and the rate of the reaction.
PLEASE HELP ASAP ILL GIVE BRAINLIEST ITS PLATO!!!
———————————
An uncovered pot of water lies out in the sun. Which statements correctly describe what happens at the surface of the liquid water? (More than one answer)
——————————
1) The vapor pressure remains constant regardless of the water temperature.
2)The vapor pressure is produced by water molecules that have evaporated.
3) The vapor pressure increases as the Sun heats the water in the pot.
4) Evaporation stops once the vapor pressure reaches a certain point.
5) Evaporation and condensation both occur on the liquid’s surface.
Explanation:
At a given temperature, the pressure exerted by the vapors on its condensed phases in a closed system is known as vapor pressure.
Therefore, when an uncovered pot of water lies out in the sun then heat caused due to radiation of sun will heat the water. As a result, vapors start to form after a certain interval.
So, when heat inside the system increases then there will be increase in vapor pressure of the system.
Thus, we can conclude that the following statements correctly describe what happens at the surface of the liquid water:
The vapor pressure is produced by water molecules that have evaporated.The vapor pressure increases as the Sun heats the water in the pot.in cement manufacturing industry the material calcium carbonate is decomposed to calcium oxide and carbon dioxide using high temperature however due to temperature distribution difference the raw material is not decomposed with one pass operationin the reactor. the recycle of unconverted raw material is needed and a portion of reactor out put is recycled. carbon dioxide is only removed from the reactor in one stream and the overall product is collected in the product stream. the feed flow rate is 10000kg/h and the overall conversion is in product stream assume that the mass flow rate ratio of the recycle stream to product stream is 0.1
the reaction is CaCo3 → CaO + Co2
a. determine the mass flow rates of gas stream and product stream
b.the mass fractions of the product stream
c.the mass flow rates of the product stream.
Bigtcuvpifyvipycrx txeZzerxtuciutesrc
where are the electrons found in Bohrs atomic atom
a. the electrons orbit the protons at the atoms center.
b. the electrons circle the nucleus in specific orbits.
c. the electrons occupy the atoms center, with protons orbiting.
d. the electrons are evenly distributed throughout the atom.
Answer:
The elections circle ITS B TRUST ME I JUST DID IT
Explanation:
Apex
The electrons circle the nucleus in specific orbits in Bohr's atomic atom.
Hence, Option (B) is correct answer.
What is Bohr's Atomic Model ?According to the Bohr's Atomic model the electrons orbit the nucleus at fixed energy levels. This model was proposed by Neil Bohr in 1915.
What is Orbit ?The electrons which move around in predictable path is known as orbit.
Thus from the above conclusion we can say that The electrons circle the nucleus in specific orbits in Bohr's atomic atom.
Hence, Option (B) is correct answer.
Learn more about the Bohr's Atomic Model here: https://brainly.com/question/18002213
#SPJ2
How does the shape of a molecule affect its function
A molecule has a characteristic size and shape. The precise shape of a molecule is usually very important to its function in the living cell. Molecular shape is crucial in biology because it determines how biological molecules recognize and respond to one another with specificity.
My deepest apology if this is not what you meant.
Molecular shapes are important in determining macroscopic properties such as melting and boiling points, and in predicting the ways in which one molecule can react with another.
What is Molecular shapes?Molecular geometry is the three-dimensional arrangement of the atoms and chemical bonds in a molecule. The shape of a molecule affects its chemical and physical properties, including its color, reactivity, and biological activity.Molecular shapes are important in determining macroscopic properties such as melting and boiling points, and in predicting the ways in which one molecule can react with another.The shape of a molecule affects its chemical and physical properties.
To learn more about Molecular shapes refer:https://brainly.com/question/20075927
#SPJ2
H2O2, hydrogen peroxide, naturally breaks down into H2O and O2 over time. MnO2, manganese dioxide, can be used to lower the energy of activation needed for this reaction to take place and, thus, increase the rate of reaction. What type of substance is MnO2 ?
a. a reactant
b. an inhibitor
c. an enhancer
d. a catalyst
Final answer:
MnO2 is a catalyst that increases the decomposition rate of H2O2 into H2O and O2 by lowering the reaction's activation energy and is not consumed in the process.
Explanation:
MnO2, manganese dioxide, serves as a catalyst in the decomposition of H2O2 into H2O and O2. A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy needed for the reaction to proceed, without being consumed in the process. After the reaction, the catalyst returns to its initial state and can be used repeatedly. Therefore, the correct answer to the question concerning the role of MnO2 is (d) a catalyst.
Why is helium less reactive than hydrogen?
A.
Each helium atom has four neutrons, but each hydrogen atom only has one neutron.
B.
Each helium atom has a full protonic power level, but each hydrogen atom only has one proton.
C.
Each helium atom has two electron energy levels, but each hydrogen atom only has one electron energy level.
D.
Each helium atom has a full valence electron shell, but each hydrogen atom only has one valence electron.
Answer:
D.
Each helium atom has a full valence electron shell, but each hydrogen atom only has one valence electron.
Explanation:
Atoms are made of protons, neutrons and electrons. Protons and neutrons are in the nucleus and electrons orbit in energy levels. Chemical properties of elements depend mostly on the number of electrons in the valence / outermost energy shell.
Elements that have an incomplete energy shell are more reactive as they try to gain a complete outer shell electron configuration either by losing electrons or gaining electrons from the valence energy shell.
He is a noble gas, which means it has a full valence electron shell therefore it is inert. H has one electron in the outer shell therefore its reactive by gaining or losing the outermost electron.
therefore H is more reactive than He as it has an incomplete valence electron shell.
Select the correct location on the image.
Which element has the largest atomic radius?
Answers options are in the photo attached...
Answer:
Ba.
Explanation:
Atomic radius decreases across the period and increases across the group.
Atomic radius of Be = 153 pm.
Atomic radius of F = 147 pm.
Atomic radius of Ga = 187 pm.
Atomic radius of Ba = 268 pm.
∴ The element that has the largest atomic radius is Ba.
Sally wants to see which fertilizer makes tomato plants grow the tallest. She use 3 types (A, B, C) and leaves one group in soil without any fertilizer. Identify the independent variable, dependent variable, and the control group in this experiment.
Answer:
Independent: The types of fertilizer. (Independent I Change)
Dependent: The plants height. (Dependent is Dependent on the Independent)
Control: The Type of plants (What isn't being changed throughout the experiment.)
Determine the molarity of a solution that is prepared by adding 600 mL of water to a 200 mL of 0.450 M solution of K2Cr2O7 ?
Answer:
0.1125 M
Explanation:
Molarity of a solution is number of moles of solute dissolved in 1 L of solution
600 mL of water is added to 200 mL of a 0.450 M solution of K₂Cr₂O₇
number of moles of K₂Cr₂O₇ remain the same but more water is added therefore volume changes making the solution more dilute
first we need to find the number of moles of K₂Cr₂O₇ already in solution
molarity = number of moles of K₂Cr₂O₇ / volume of solution
substituting values in the equation
0.450 mol/L = number of moles / 0.2 L
number of moles = 0.09 mol
there are 0.09 mol of K₂Cr₂O₇ and the new volume is 200 mL + 600 mL = 800 mL
molarity = 0.09 mol / 0.8 L
molarity = 0.1125 mol/L
new molarity is 0.1125 M
Based on the image how many protons does carbon have
Carbon has 6 protons.
Hope that helped you!
I think the answers is D.12