Somebody help meeeeeee!!

Somebody Help Meeeeeee!!

Answers

Answer 1

Answer: The answer would be B.

Explanation:

because ....

If scientists make new discoveries about fossils then most likely their results are going to different than Charles. Also, the scientists theory is most likely going to be different as well.

* Hopefully this helps:) Mark me the brainliest:)!!

~234483279c20~

Answer 2

The answer would be B


Related Questions

How might a gene mutation be silent, with no observable affect on a cell or an organism?
A. Many proteins are superfluous to the function of a cell. A gene mutation in a gene that encodes an unnecessary protein would have no observable affect on the cell or the organism.
B. Codons are complementary to anti-codons in tRNA. A gene mutation that changes a codon to its anti-codon would have no observable effect on the cell or the organism.
C. Several codons are stop codons. A gene mutation that inserts a stop codon when only a few amino acids remain in the peptide sequence would have no observable effect on the cell or the organism.
D. Many amino acids are coded by multiple codons. A gene mutation that encodes the same amino acid would have no observable effect on the cell or the organism.

Answers

Answer:

D

Explanation:

There is approximately 64 base combination of codons (3 bases sequences) that are possible from the four bases nucleotides that make up our DNA. Yet there are only approximately 20 types of amino acids in our bodies. This means that other than the 4 start and stop codons, there is a lot of redundancy in the coding of amino acids by codons. Therefore some mutations on codons will have no effect on the type of amino acid translated. These are the silent mutations.

Look at the food web shown above. Which of the organisms act as producers in the ecosystem

Answers

Answer: D. Plants.

Explanation: Because plants do photosynthesis, in which they take sunlight, and turn it into chemical energy, which they use for their daily life activities.

In the given food web , plants acts as a producer.

Plants are producers because they make their own food and out of it creates energy for their survival, reproduction and growth.

What is a Food Web?

A food web is an interconnection of food chain in an ecological community.

A food web results into a pathway called feeding pathway where heterotrophs obtain food and energy from autotrophs which makes their own food.

Different kinds of feeding relation can be observed in food web which are:

Herbivory, Carnivory, Scavenging, Parasitism.

The concept was coined by Charles Elton in 1927.

Food Webs are limited representations of real ecosystems and necessarily aggregate many species into trophic species which are functional groups of species having the same predators and prey in the food web.

Ecologists use simplifications in the quantitative models of trophic or consumer resource systems dynamic.

Why Plants performs as Producers?

Producers are defined as organisms capable of preparing their own food from simple inorganic substances like carbon dioxide and water using sunlight energy in the presence of chlorophyll.

Green plants are termed as producers as they synthesize their own food using photosynthesis process and thus produces food for themselves and helps to initiate food chain.

To learn more about Food web here

https://brainly.com/question/2233704

#SPJ2

What controls a tropism?

Answers

A tropism is a turning toward or away from a stimulus in the environment. Growing toward gravity is called geotropism. Plants also exhibit phototropism, or growing toward a light source. This response is controlled by a plant growth hormone called auxin.

Hope it helped!

Please mark brainliest

Answer: It is controlled by the sun. It grows like a normal plant does. A plant grows towards the sun.

Explanation: Plants always grow towards the sun unless somehow they die. The sun controls them.

which process can affect the rate of carbon dioxide emissions or other greenhouse gas emissions by changing average temperatures?

Answers

Answer:

Greenhouse gas affect

Explanation:

Greenhouse gas

A greenhouse gas (sometimes abbreviated GHG) is a gas in an atmosphere that absorbs and emits radiation within the thermal infrared range. This process is the fundamental cause of the greenhouse effect. The primary greenhouse gases in Earth's atmosphere are water vapor, carbon dioxide, methane, nitrous oxide, and ozone

The process that can affect the rate of carbon dioxide emissions or other greenhouse gas emissions by changing average temperatures is called climate feedback and is present in Option A.

What is climate feedback?

Climate feedback refers to the process by which changes in one component of the Earth's climate system lead to changes in other components, and there are many examples of climate feedbacks in the Earth's climate system. This includes a warming climate that can lead to the melting of glaciers and ice sheets, which in turn can cause sea levels to rise; another example of climate feedbacks is changes in ocean circulation patterns, which can affect the uptake and release of carbon dioxide.

Hence, the emissions of carbon dioxide or other greenhouse gas emissions caused by changing average temperatures are called "climate feedback" and are present in Option A.

Learn more about the climate feedback here.

https://brainly.com/question/13757233

#SPJ6

The question is incomplete, complete question is below

which process can affect the rate of carbon dioxide emissions or other greenhouse gas emissions by changing average temperatures?

A)climate feedback

B)positive loop

Phosphorus isn't as abundant as nitrogen or carbon because it is contained in the
+ and
released with
processes, which can take a long time.

Answers

Answer: Lithosphere and geological

Explanation: The phosphorus is not as abundant as carbon because it does not occurs in the form of gas.

The phosphorous cycle is completed in the lithosphere as well as geological process which takes time. It is contained in the rocks and gets run off through water after weathering.This is how the plants get phosphorous from soil and water.

The run off then flows towards ocean and sea and gets deposited in the ocean. This is how phosphorous cycle takes place.

Final answer:

Phosphorus is crucial for life but isn't as abundant as nitrogen or carbon because it's found primarily as phosphate, which moves through the environment very slowly. It's leached from rocks and makes its way into bodies of water, where it can stay for thousands of years.

Explanation:

Phosphorus is an essential nutrient for living processes; it's a major component of nucleic acid and phospholipids, and, as calcium phosphate, makes up the supportive components of our bones. Phosphorus is often the limiting nutrient, necessary for growth, in aquatic ecosystems. Phosphorus occurs in nature as the phosphate ion (PO4³-).

In addition to phosphate runoff as a result of human activity, natural surface runoff occurs when phosphate is leached from phosphate-containing rock by weathering, which sends phosphates into rivers, lakes, and the ocean. The movement of phosphate from the ocean to the land and through the soil is incredibly slow, with the average phosphate ion having an oceanic residence time between 20,000 and 100,000 years. Consequently, the abundance of phosphorus is relatively low when compared to elements like nitrogen or carbon.

Learn more about Phosphorus abundance here:

https://brainly.com/question/34697100

#SPJ6

at which step does during protein synthesis does a mutation occur

Answers

Answer:

Each codon codes for one amino acid or for a *Protein synthesis is the process in which proteins are made. In the first step, called transcription, the genetic code in DNA is copied by RNA. In the second step, called translation, the genetic code in RNA is read to make a protein.

Explanation:

During protein synthesis, mutations can occur during DNA replication, transcription, or translation at the ribosome. The proofreading function of DNA polymerases minimizes errors during replication, but if the mRNA is transcribed incorrectly or if incorrect translation occurs, mutations can result in alterations to the resultant protein.

The question pertains to the stage at which a mutation can occur during protein synthesis. Mutations are random changes in the sequence of bases in DNA and can be the ultimate source of genetic variation. During protein synthesis, there are several steps where mutations can occur:

During DNA replication, errors can occur when DNA polymerase makes mistakes in copying the DNA. These errors are called mutations and can affect the phenotype if they occur within the protein-coding sequence of a gene. However, this is quite rare due to 'proofreading' abilities of DNA polymerases.Transcription is the process where mRNA is synthesized from DNA. If mRNA polymerase doesn't transcribe DNA correctly, mutations may be introduced at this stage.The second step of protein synthesis, protein translation, occurs at the ribosome. If the ribosome translates the sequence of mRNA incorrectly, or if a substitution results in a premature stop codon, the resulting polypeptide chain can be functionally compromised.

Other mutations are induced by environmental factors called mutagens. In some instances, such as with bacteria under stress, mutation rates can significantly increase as a self-defense mechanism.

How does temperature affect electrical resistance?

A. As temperature increases, electrical resistance decreases.

B. Temperature and electrical resistance are unrelated.

C. As temperature increases to approximately water’s boiling point, electrical resistance decreases. Beyond this, it increases.

D. As temperature falls, electrical resistance decreases.

Answers

Answer:

Temperature affects metal in numerous ways. A higher temperature increases the electrical resistance of a metal, and a lower temperature reduces it. Heated metal undergoes thermal expansion and increases in volume. so the answer is C

Electrical resistance typically increases with increased temperature in conductors due to increased atomic vibrations that cause more electron collisions, thus increasing resistivity. Conversely, in semiconductors, resistance typically decreases with increased temperature.

The correct answer is that electrical resistance generally increases with an increase in temperature for conductors. This is because, as temperature rises, atoms in a conductor vibrate more rapidly and over larger distances. This increased atomic vibration causes more collisions for electrons moving through the material, thereby increasing resistivity. For most conducting metals, this effect results in an increase in resistance with temperature. The relationship can often be modeled linearly for small temperature changes, using a temperature coefficient in the resistivity equation: (ρ = ρο (1 +αΔΤ)), where ρο is the original resistivity, α is the temperature coefficient of resistivity, and ΔΤ is the change in temperature. For semiconductors, however, the situation is different. As temperature increases, their resistivity decreases because thermal agitation increases the number of free charges, making them better conductors at higher temperatures.

Ecosystems change over time—even when they appear to be stable. What is the term for the predictable or orderly sequence of changes experienced by a community?
A.
turnover
B.
ecological succession
C.
eutrophication

Answers

Answer:

Ecological succession, I believe.

Answer: ecological succession

Explanation:

I did the study island

How is the density of ocean water affected by temperature and water?

Answers

Answer:

There are two main factors that make ocean water more or less dense than about 1027 kg/m3: the temperature of the water and the salinity of the water. Ocean water gets more dense as temperature goes down. So, the colder the water, the more dense it is. Increasing salinity also increases the density of sea water.

Density can be affected by temperature and water in the following way: the warmer the water, the more space it takes up, and the lower its density.

What is density of water?

Density is a unique feature of water. Water in a solid state (ice) is less dense than liquid form (water).

The higher the temperature of a water body, the lower the density of the water while the lower the temperature of the water, the higher the density.

Therefore, it can be said that the warmer the water, the more space it takes up, and the lower its density.

Learn more about density at: https://brainly.com/question/15164682

#SPJ2

Which base sequence in the DNA molecule identifies the region where a transcription factor will bind, allowing RNA polymerase to attach to the molecule?
a. AACCTG
b. TGGA
c. TATATA
d. AGGAT

Answers

TATATA base sequence in the DNA molecule identifies the region where a transcription factor will bind, allowing RNA polymerase to attach to the molecule. So, the correct option is C.

What is Transcription factor?

A transcription factor is defined as a protein that regulates the rate of transcription of genetic information from DNA to messenger RNA by binding to a specific DNA sequence.

Most of the transcription factors are located in the cytoplasm, after which it receives signals from the cell membrane signal transduction, transcription factors are activated and then move from the cytoplasm to the nucleus where they interact with the associated DNA frames.

The TATATA base sequence in the DNA molecule identifies the region where a transcription factor will bind.

Thus,  the correct option is C.

Learn more about Transcription, here:

https://brainly.com/question/29979094

#SPJ6

Final answer:

The TATA box, represented by the sequence c) TATATA, is where transcription factors bind allowing RNA polymerase to initiate transcription.

Explanation:

The region on a DNA molecule where a transcription factor will bind, allowing RNA polymerase to attach to the molecule, is identified by a specific base sequence known as the TATA box. This sequence is typically a repeat of thymine and adenine dinucleotides, represented as TATATA or a slight variant thereof. Transcription factors first bind to the TATA box, which allows for the assembly of an initiation complex. Subsequently, RNA polymerase recognizes this complex and binds to the DNA, initiating transcription.

what specialized tissue do vasculer plants have that other plants do not

Answers

Answer:

You didnt give me and choices so out of the information i have from this answer i can conclude that the answer is out of these 3 Options.

1.) Phyllids 2.) Xylem 3.) Phloem

The specialized tissue that vascular plants have that other plants dont are xylem and phloem. These vascular tissues allow plants to grow without drying out.

Malaria is one of the most common parasitic diseases in the world. It is caused by a protist from the genus Plasmodium. How can humans best avoid becoming infected with malaria?
A.
exercise regularly
B.
take medicine that destroys liver cells
C.
always wear long-sleeved shirts
D.
avoid mosquito bites

Answers

Hi!

D avoid mosquito bites. Mosquitos are a really nasty and efficient way to spread diseases. In this case, you would probably want a lot of bug spray.

Hope this helps!

Answer:

D = avoid mosquito bites!

Sulfur dioxide is released into the air but ends up in lakes and streams as acid rain. Based on your knowledge of the water cycle, explain how this happens.

Answers

As water evapo-transpires into the atmosphere from the biosphere and hydrosphere, it cools and condenses. The water droplets in the atmosphere dissolve the sulfur dioxide molecules in the atmosphere forming sulphuric acid;

SO2(g) + H2O(l) --> H2SO3(aq)

The precipitation will, therefore, have a low pH because it is acidic. The runoff from the precipitation end up in rivers and ultimately in lakes.

Answer:

When human beings burn fossil fuels they release, sulfur dioxide, nitrogen oxides into the environment.

Those air pollutants release in the atmosphere reacts with water, oxygen and some other gases to form nitric acid and sulfuric acid.

With the help of wind the substances are spread to hundreds of miles. When the acid rain reaches the earth, it flows through lakes and other ways to enter the water system.

exposure to 100 R's :

•will have little effect
•can cause radiation sickness
•is enough to kill a person

?​

Answers

Answer:

Will have little effect

Answer:

Your answer is B. Radiation Sickness.

Explanation:

Look it up on Go.ogle if you don´t believe me.

Hope this Helps! :)

How does water affect metamorphic processes? A. It decreases the rate at which metamorphic reactions take place. B. It stops elements from moving around within earths crust. C. it can have elevated concentrations of dissolved substances. D. It prevents the transfer of ions between and within minerals.

Answers

Answer:

it can have elevated concentrations of dissolved substances

Explanation:

Water is widely regarded as a universals solvent. During a metamorphic process, the presence of fluids most especially water cannot be over empahisized.

Water in metamorphic processes helps to concentrate dissolve materials and moves them from one point to another within the crust. By so doing, water helps to facilitate the rate at which the reaction and transformation occurs. Water available for metamorphic processes usually have elevated temperature, this would further aid to catalyse the transformation work on the rock.

Water plays nearly the same role as pressure and temperature in a metamorphic reaction. It serves as the mobile unit to move materials from one point to the to another. The water concentrates the dissolve materials that comes in contact with it and utilizes it to further produce new metamorphic minerals. Generally, fluids allow for better mobility.

Answer:

It can have elevated concentrations of dissolved substances.

Describe two ways in which waves travel, and give an example of each.

Answers

Answer:

Basically, sound waves carry noises through the air to our ears. SEISMIC WAVES travel inside the Earth and cause earthquakes. Light, heat, radio, and similar types of energy are carried by a variety of waves in the ELECTROMAGNETIC SPECTRUM. Some energy waves need a medium, such as water or air, through which to travel.

Explanation:

Tsunamis are _____.

waves that are produced by tidal forces

waves that cannot cause damage on land

often generated by movements of the ocean floor

also known as tidal waves

Answers

Answer:

often generated by movements of the ocean floor

Explanation:

The tsunamis are the most devastating waves that occur on our planet. They are enormous and have great power, and once they reach the coastline they continue into the land and destroy pretty much everything on their way. These waves are mostly generated by movements, disturbances on the ocean floor. They occur at places where there's subduction zones. When an adjustment occurs between the crust of the plates, it creates an earthquake. That adjustment of the crust also creates gaps, through which the water is sucked in, and than as the crust continues with the adjusting and shuts the gap, the water is pushed back with lot of force. That creates the tsunamis, enormous, high speed, very powerful waves, that are devastating for everything on their way.

Answer:

option C. often generated by movements of the ocean floor

Explanation:

What will probably happen to the plant if it does not receive any water for a month?
A.
It will stop growing.
B.
It will continue to grow at the same rate.
C.
It will still grow, but it will turn a darker green.
D.
It will start growing faster.
Reset Submit

Answers

Answer: Photosynthesis is the light dependent process which must occur for the plant to live. This process also requires water and carbon dioxide. If photosynthesis does not occur the plant will wilt and die.

Explanation:

Which sphere is part of the carbon and water cycles but absent form the phosphorus cycle

Answers

Answer: Atmosphere

Explanation:

25+ POINTS!

Quick question, how do scientists use genetic information? Why is it useful?

Answers

Answer:

The new genetic information is useful to public health scientists because it allows them to test for relationships between diseases and genetics.  The most common way scientists collect genetic information on a DNA sample is to interrogate a specific point in the genome using a technique we call “genotyping.”

Explanation:

Answer:

The new genetic information is useful to public health scientists because it allows them to test for relationships between diseases and genetics

Scientists observe the thickness of a tree’s _______to learn about past climate conditions

Answers

Answer:

Scientists observe the thickness of a tree’s ring's to learn about past climate conditions

Hope this helps :)

Have a great day !

5INGH

Explanation:

Answer:

tree rings

Explanation:

sample response on edge

A person asks questions about what causes sound waves to transfer through the air. what is the best description of what this person is doing? A listening to music B looking for a solution C designing a new device D studying science

Answers

Answer:

I think it's A  could be wrong

Explanation:

Final answer:

The person seeking answers about what causes sound waves to transfer through the air is essentially studying science. They're investigating how sound waves, disturbances of matter that carry from their source, work in transferring sound. The process involves vibrations causing variations in pressure, which our ears and brains interpret as sound.

Explanation:

The person asking questions about what causes sound waves to transfer through the air is essentially studying science, specifically Physics. Sound waves are a type of pressure wave and are disturbances of matter that are transmitted from their source outward. An example of this can be when a speaker produces sound. The speaker uses a cone to create oscillations that result in the vibration of air molecules. These vibrations form compressions (high-pressure regions) and rarefactions (low-pressure regions), which move out as longitudinal pressure waves or sound waves with the same frequency as the speaker.

In human hearing, these sound waves cause the eardrum to vibrate. This complicated mechanism then converts the vibrations into nerve impulses which the brain perceives as sound. Even things like music are pleasant due to the changing frequencies of various instruments and voices, which form different sound waves.

Learn more about Sound Waves here:

https://brainly.com/question/11797560

#SPJ3

Which of the following diseases is always caused by a bacterial infection?
A.
smallpox
B.
leukemia
C.
HIV
D.
diphtheria

Answers

Hi!

I would say D, diphtheria, because it is eaisly prevented by a vaccine and it I'd a nose and throat disease.

Hope this helps!

Diphtheria is always caused by a bacterial infection. Therefore, option (D) is correct.

What is Diphtheria?

Diphtheria is a serious bacterial infection that affects the respiratory system and can lead to breathing difficulties, heart failure, and even death. It is caused by the bacterium Corynebacterium diphtheriae, which produces a toxin that can damage the body's tissues.

Smallpox (option A) is a viral disease that has been eradicated, and leukemia (option B) is a cancer of the blood and bone marrow that can be caused by various factors, including genetic mutations and environmental factors. HIV (option C) is also caused by a viral infection, specifically the human immunodeficiency virus, which attacks the immune system.

Learn more about Diphtheria, here:

https://brainly.com/question/31034802

#SPJ3

11. How does active transport differ from all other forms of transportation?
A. It creates an equilibrium shift
B. It maintains homeostasis
C. It shifts from high to low
D. It requires energy​

Answers

Though both active transport and passive transport involve ion movement and use ion channels to move ions across the cell membrane, in or out of the cell.

Passive Transport (or Diffusion) moves ions from high concentration to low, using no metabolic energy. Active Transport moves ions from low concentration to high, using metabolic energy in the form of ATP.

So the answer is C.

Answer:

The Answer is D It requires energy

Explanation:

The movement of ions  are assisted enzymes which uses energy.

In this lab, you will study the fur color of mice. Image of fur color of mice The color of the fur is the .The genetic combination of alleles that determine the fur color is called the .

Answers

Answer:

The Color of the fur is the phenotype

The gentic combination of alleles that determine the fur color is called the genotype

Explanation:

correct on e2020

The correct answer is

The color of a mouse's coat is influenced by the alleles they inherit for the MC1R gene. Mice with two copies of allele 1 have the lightest coat, those with two copies of allele 2 have the darkest coat, and heterozygotes have medium coat color

What do you mean by fur color?

Something is the appearance it has as a result of the way it reflects light. Red, blue and green are colors.An example of fur is a dog thrown on the couch. Fur is defined as the hair on a mammal's body or strips of that material.

Learn more about fur color below

http://brainly.com/question/904448

#SPJ2

The wing of a bird and the leg of a horse are very different looking structures. Although they look different, bird wings and horse legs are very similar in the arrangement of the bones that make up the limb. Which term is used by scientists to describe structures that look different on the outside but are actually similar in construction and develop from the same embryonic tissues?
A) common descent
B) ancillary anatomy
C) vestigial structures
D) homologous structures

Answers

Hi!

It is D, homologous structures.

Hope this helps!

Answer: D) homologous structures

Explanation:

____ are simple sugars
Monosaccharides
Polysaccharide
Disaccharides
Lipids

Answers

The correct answer is: Monosaccharides

Explanation: Monosaccharides, also called simple sugars, are the most essential units of carbohydrates. They are basic units of carbohydrates and cannot be additionally hydrolyzed to easier compounds. The general formula is (CH2O)x,

hope this helps :)

Savannas are ____________.

Answers

Answer:

Grassland with few trees and shrubs/vegetation

Explanation:

What is a solution give a example

Answers

Answer:

A solution is a homogeneous mixture of two or more substances.

Salt Water

Explanation:

Which describes the function of the human sperm cell’s structure?

A)The nucleus contains all 46 chromosomes.
B)The tail allows it to travel to the egg.
C)The head contains a basic substance that counteracts acidic substances in the vagina.
D)The sperm’s structure allows it to live for two weeks in the vagina.

Answers

Answer:

The correct answer is B. The sperm tail helps in propelling and moving the sperm to reach the egg. It is made of proteins which contract and relax to cause the movement. The head and tail however, are covered by a single membrane. Head composes the nucleus.

Answer:

b

Explanation:

why not

Other Questions
Use the figure below to complete the following problem What is the solution to the equation 3x+9-7x=2(x+6) Complete the square to determine the minimum or maximum value of the function defined by the expression. ?x2 + 10x + 5 ) Which of the following describes a relationship of predator-prey?Oxpecker birds eat parasitic ticks off the backs of zebrasA moray eel eats a fish swimming byA tick attaches itself to the inside leg of a deerBirds feed off the insects that are stirred up from the grasses as cattle move through If each cube has edges 2 centimeters long, what is the volume of the blue-outlined prism?A) 20 cm3B) 40 cm3C) 160 cm3D) 320 cm3 What is the sum of the geometric series? For the function whose graph is shown, which is the correct formula for the function? hotspots in a microwave oven are caused by the formation of standing waves within the cooking chamber. What is the separation between hotspots in a 2.45 GHz microwave oven? A teammate starts taking an all-natural supplement to improve strength and body shape and recommends you take it, too. This is an example ofSelect one:a. positive peer influence.b. negative peer influence.c. neutral influence. A part of the consmerism cycle is that manufacturers The equation that measures the shape of your contact lens is -0.5x2 + 6x 16 = 0. The lens maker cuts the lens material at the x-axis for fitting. Find the zero(s) where the lens material starts and ends. two vertices of a right angle have coordinates (3,7) and (3,10). The segment that connects these points a leg of the triangle. which set of coordinates for the third vertex would create a right triangle? Why do news organizations sometimes show bias? O A. Because they are worried about national crises O B. Because the government tells them what to say O c. Because they need to maintain their finances to stay in business O D. Because the audience influences them In which film did mickey mouse make his public debut? Method of navigation that relies on careful observation of the natural world If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 477J of energy to the room? In Charlotte Brontes novel Jane Eyre, Jane is portrayed as a person who is honest and too proud to take extra money when it is offered to her.What kind of information about Janes character is provided in this description?her valuesher fearsher inner conflicther past 20. Who trained the American troops? A. Ben Franklin B. Thomas Jefferson C. Baron von Steuben D. Jean-Jacques Rousseau Is there more wood in a 70-foot-high tree trunk with a radius of 2.1 feet or in a 60-foot-high tree trunk with a radius of 2.4 feet? Assume that the trees can be regarded as right circular cylinders.There is nothing ftft cubedft squared of wood in the 70-foot-high tree and nothing ft cubedft squaredft of wood in the 60-foot-high tree. There is more wood in the 6070-foot-high tree Eats shoots and leaves highway safety device