Answer: into the atmosphere
Explanation:
As this energy is released into the atmosphere, bubbles of warm air is formed which is released and it is replaced by cooler air. This process is responsible for many of the weather patterns in our atmosphere, and is known as....
convection
While convection is a form of heat transfer from one place to the other involving the movement of fluids. So in the case narrated above the fluid which serves as a medium is Air.
Tevin left his house and rode his bike into town at 6 mph. Along the way he got a flat so he had to turn around and walk his bike back to his house traveling 3 mph. If the trip down and back took 12 hours, how far did he get before his tire went flat?
Answer:
Distance covered by Tevin before his tire went flat = 24 miles
Explanation:
Let x be the distance covered by Tevin before his tire went flat.
Given:
Tevin drives his bike in the town = 6 mph
Tevin back to his house = 3 mph
Total taken time by Tevin = 12 hours
We need to find the distance covered by Tevin in 12 hours.
Solution:
Using speed formula
[tex]Speed =\frac{Distance}{Time}[/tex]
We write the above formula for Time.
[tex]Time=\frac{Distance}{Speed}[/tex]-----------(1)
Time taken by Tevin when biking in town
Substitute speed = 6 mph and distance = x in equation 1.
[tex]Time=\frac{x}{6}[/tex] ----------(2)
Time taken by Tevin when he is back to his house.
Substitute speed = 3 mph and distance = x in equation 1.
[tex]Time=\frac{x}{3}[/tex] -------------(3)
Total time taken by Tevin.
Total taken time by Tevin = Time taken when biking in town + Time taken when Tevin back to his house.
Substitute time value from equation 2 and 3 in above equation and total time = 12 hours.
[tex]12=\frac{x}{6}+\frac{x}{3}[/tex]
Now, we solve the above equation for x.
[tex]12=\frac{x+2x}{6}[/tex]
[tex]12\times 6=x+2x[/tex]
[tex]72=3x[/tex]
[tex]x=\frac{72}{3}[/tex]
[tex]x=24\ mi[/tex]
Therefore, distance covered by Tevin in 12 hours is equal to 24 miles.
A series of pulses of amplitude 0.28 m are sent down a string that is attached to a post at one end. The pulses are reflected at the post and travel back along the string without loss of amplitude. What is the amplitude at a point on the string where two pulses cross if the string is rigidly attached to the post?
Answer:
a. The pulses cancel each other resulting in zero displacement.
b. The pulses reinforce each other, having a displacement of 2× amplitude or 0.56 m.
Explanation:
When the pulse are sent down the attached string it gets reflected and we have crossing pulses as the incident and reflected pulses cross each other.
a. If the string is rigidly attached to the post then the incident and reflected pulses will have the same amplitude but different direction. That is either the reflected will be going up and the incident down thereby resulting in a cancellation or zero displacement
Incident amplitude = 0.28 m
Reflected amplitude = -0.28 m
Sum = 0.28 m - 0.28 m = 0 m
b. If the end at which the relfection occurs is free to slide, then the incident and the reflected pulses will again have the same amplitude and in this case, the same direction. Therefore;
Incident amplitude = 0.28 m
Reflected amplitude = 0.28 m
Sum = 0.28 m + 0.28 m = 0.56 m
Answer:
The answer is zero displacement (0 m)
Explanation:
If the end of the string is not free, the reflected pulse has the same amplitude but opposite polarity to the incident pulse. Because of this, for A, the result equals zero (0 m).
1. Meiosis produces daughter cells that are
A) Haploid
B) Diploid
C) The same as the parent cell
D) Have more chromosomes than the parent cell
2. What is the purpose of mitosis?
A) Somatic Cell production
B) Gametic cell production
C) To make gametes
D) To make sperm and eggs
3. What is the purpose of meiosis?
A) Somatic Cell production
B) Gametic cell production
C) Liver cell production
D) Brain cell production
4. Which of the following about cell generation is true?
A) Mitosis is a form of sexual reproduction.
B) Meiosis is a form of asexual reproduction.
C) Mitosis produces identical cells to parent cells.
D) Meiosis produces identical cells to parent cells.
5. S=short fur and s=long fur, SS short fur and Ss long fur mate. What is the phenotypic ratio of short fur to long fur?
A) 3:1
B) 4:0
C) 1:3
D) 2:2
6. L=long wings and l=short wings. How can two long winged bees produce short winged bees?
A) 2 long winged bees cannot produce short winged bees
B) Both parent bees are homozygous dominant LL
c) Both parent bees are heterozygous Ll
D) Both parent bees are homozygous recessive ll
7. Which of the following is NOT true of DNA?
A) DNA is made up of 4 base chemicals
B) DNA is genetic material passed from parent to offspring
C) Long strands of DNA make up chromosomes
D) DNA is made up of chromosomes
8. DNA is now accepted as the molecule for heredity instead of proteins. How did this happen?
A) Scientists thought DNA seemed cooler
B) Each hypothesis was tested and DNA supported the data better
C) Highly respected scientists introduced it, everyone accepted
D) Proteins are known for producing muscles and that's it
9. Which of the following is most likely a concern about genetically modified crops?
A) There may be an increase in global food prices.
B) There may be a decrease in the range of environmental conditions in which a crop can survive.
C) There may be a decrease in the amount of time that fruits or vegetables stay fresh in the supermarket
D) There may be an increase in pest populations that are resistant to control measures.
10. What is NOT true of GMOs
A) They are proven to cause cancer
B) GM plants are pest resistant lowering the need for pesticide
C) GM plants produce higher yields for farmers
D) The long term effects are unknown
11) What are alleles?
A) characteristics
B) a form of a gene
C) a gamete
D) the study of heredity
I am willing to give brainliest and 100 points whoever EXPLAINS and gives the ANSWER to each question. You are not rushed, because I have 11:59, by the end of today to submit the assignment. If you write the answers and no explanation, you will get reported. So please answer and explain the questions clearly so I understand them. I am putting the subject as physics, but it is really science. good luck.
Answer:
1. A Haploid
2. A. Somatic Cell production
3. B. Gametic cell production
4. C. Mitosis produces identical cells to parent cells.
5. B 4:0
6. C Both parent bees are heterozygous Ll
7. D DNA is made up of chromosomes
8. B Each hypothesis was tested and DNA supported the data better
9. D There may be an increase in pest populations that are resistant to control measures.
10. A They are proven to cause cancer.
11. B a form of a gene
Explanation:
Answer was too long, so is attached in a word document
Which of the following best defines a nation's labor force? the total number of persons who are willing and able to work but cannot find a job the total number of persons between the ages of 16 and 65 the total number of employed and unemployed persons the total number of persons working full time and part time
Answer:
the total number of persons between the ages of 16 and 65
Explanation:
The labour force consists of all the people who are able to work in a country or area, or all the people who work for a particular company.
The workforce of a country includes both the employed and the unemployed (labour force)
The labor force of a nation includes all employed and unemployed persons, excluding those not actively seeking work. Employed individuals have a job, while unemployed individuals are jobless but actively looking for work. The unemployment rate measures the percentage of the labor force that is unemployed.
Explanation:A nation's labor force is best defined as the total number of employed and unemployed persons. Specifically, it includes all individuals who are either currently working (employed) or actively seeking employment (unemployed). The labor force does not include those who are not seeking work, such as students, stay-at-home parents, individuals with disabilities preventing them from working, or those who have taken early retirement.
The unemployment rate is a key economic indicator that represents the percentage of the labor force that is unemployed. It's important to note that to be considered unemployed, a person must be actively looking for work and available to work. This excludes people who are not actively seeking employment, who are then categorized as out of the labor force.
Lastly, the definition of 'employed' in the United States is quite broad, including those working part-time or temporarily, as well as individuals on leave but who have a job.
Consider two conducting spheres with one having a larger radius than the other. Both spheres carry the same amount of excess charge. Which one of the following statements concerning the potential energy of the two spheres is true? O The potential energy of the larger sphere is greater than that of the smaller sphere. The potential energy of the larger sphere is the same as that of the smaller sphere. O The potential energy of the larger sphere is less than that of the smaller sphere.
Answer: Option (a) is the correct answer.
Explanation:
It is known that potential energy is the energy occupied by an object or substance due to its position is known as potential energy.
Therefore, more is the space occupied by an object more will be its position at a particular location. Hence, more will be its potential energy. On the other hand, smaller is the space occupied by an object, smaller will be the position holded by it.
Hence, smaller will be its potential energy.
Thus, we can conclude that for the given situation the statement, potential energy of the larger sphere is greater than that of the smaller sphere, is true.
Final answer:
The potential energy of the larger conducting sphere is less than that of the smaller sphere because electric potential is inversely proportional to radius and both spheres carry the same charge.
Explanation:
When two conducting spheres with the same excess charge but different radii are considered, the potential of each sphere is given by V = kQ/R, where V is the potential, k is Coulomb's constant, Q is the charge, and R is the radius of the sphere. Since the charge Q is the same for both spheres, but the radius R is larger for one of them, the electric potential energy will be higher for the smaller sphere since it has a smaller radius. This stems from the fact that electric potential is inversely proportional to the radius, meaning a smaller radius results in a higher potential for the same amount of charge.
The correct statement is: (d)he potential energy of the larger sphere is less than that of the smaller sphere.
A supersonic jet is at an altitude of 14 kilometers flying at 1,500 kilometers per hour toward the east. At this velocity, how far will the jet fly in 1.6 hours?
Answer:
The jet will fly 2400 km.
Explanation:
Given the velocity of the jet flying toward the east is 1,500 kmph toward the east.
We need to find the distance covered in 1.6 hours.
In our problem we are given speed and time, we can easily determine the distance using the following formula.
[tex]Distance=Speed\times Time[/tex]
[tex]Distance=1500\times 1.6=2400\ km[/tex]
So, the supersonic jet will travel 2400 km in 1.6 hours toward the east from its starting point.
A student sits on a rotating stool holding two 2.6 kg masses. When his arms are extended horizontally, the masses are 0.71 m from the axis of rotation, and he rotates with an angular velocity of 1.8 rad/sec. The student then pulls the weights horizontally to a shorter distance 0.23 m from the rotation axis and his angular velocity increases to ω2. For simplicity, assume the student himself plus the stool he sits on have constant combined moment of inertia Is = 3.8 kg m2 . Find the new angular velocity ω2 of the student after he has pulled in the weights. Answer in units of rad/s.
Answer:
2.8 rad/s
Explanation:
In absence of external forces, the total angular momentum of the system must be conserved.
The angular momentum when the arms of the student are extended horizontally is given by:
[tex]L_1 = (I_0 + 2I)\omega_1[/tex]
where:
[tex]I_0=3.8 kg m^2[/tex] is the moment of inertia of the student+stool
[tex]I=mr^2[/tex] is the moment of inertia of each mass, where:
m = 2.6 kg is one mass
r = 0.71 m is the distance of each mass from the rotation axis
[tex]\omega_1=1.8 rad/s[/tex] is the initial angular velocity
So we have
[tex]L_1=(I_0+2mr^2)\omega_1[/tex]
When the student pulls the weights to a distance of r' = 0.23 m, the angular momentum is:
[tex]L_2=(I_0+2I')\omega_2[/tex]
where:
[tex]I'=mr'^2[/tex] is the new moment of inertia of each mass, with
r' = 0.23 m
Since the angular momentum must be constant, we have:
[tex]L_1=L_2\\(I_0+2mr^2)\omega_1 = (I_0+2mr'^2)\omega_2[/tex]
and solving for [tex]\omega_2[/tex], we find the final angular velocity:
[tex]\omega_2 = \frac{I_o+2mr^2}{I_0+2mr'^2}\omega_1=\frac{3.8+2(2.6)(0.71)^2}{3.8+2(2.6)(0.23)^2}(1.8)=2.8 rad/s[/tex]
when an object gets larger, why does the volume of an object increase faster than the surface area?
Let us consider the object to be a cell.
Explanation:
As a cell grows bigger, its internal volume enlarges and the cell membrane expands. This results in the increase in volume more rapidly than does the surface area, and so the relative amount of surface area available to pass materials to a unit volume of the cell steadily decreases. This means the surface area to the volume ratio gets smaller as the cell gets larger.
Example of a cube:
Cube size Surface area Volume
2cm 2 × 2 × 6 = 24 cm² 2 × 2 × 2 = 8 cm³
4 cm 4 × 4 × 6 = 96 cm² 4 × 4 × 4 = 64 cm³
6 cm 6 × 6 × 6 = 216 cm² 6 × 6 × 6 = 216 cm³
8 cm 8 × 8 × 6 = 384 cm² 8 × 8 × 8 = 512 cm³
This shows as the object gets larger, the volume of an object increases faster than the surface area.
A student of mass 57.4 kg, starting at rest, slides down a slide 17.2 m long, tilted at an angle of 28.1° with respect to the horizontal. If the coefficient of kinetic friction between the student and the slide is 0.108, find the force of kinetic friction, the acceleration, and the speed she is traveling when she reaches the bottom of the slide. (Enter the magnitudes.)
Explanation:
(a) Formula to calculate the force of kinetic friction is as follows.
f = [tex]\mu N[/tex]
= [tex]\mu mg Cos (\theta)[/tex]
Putting the given values into the above formula as follows.
f = [tex]\mu mg Cos (\theta)[/tex]
= [tex]0.118 \times 57.4 kg \times 9.8 \times Cos (28.1^{o})[/tex]
= [tex]0.118 \times 57.4 kg \times 9.8 \times 0.882[/tex]
= 58.54 N
Hence, the force of kinetic friction is 58.54 N.
(b) Net force experienced by the block will be as follows.
F = [tex]mg Sin (\theta) - f[/tex]
ma = [tex]mg Sin (\theta) - \mu mg Cos (\theta)[/tex]
or, a = [tex]g[Sin (\theta) - \mu Cos (\theta)][/tex]
= [tex]9.8[Sin(28.1) - Cos(28.1)][/tex]
= [tex]9.8 \times (0.471 - 0.882)[/tex]
= 4.03 [tex]m/s^{2}[/tex]
Therefore, the acceleration is 4.03 [tex]m/s^{2}[/tex].
(c) According to the third equation of motion,
[tex]v^{2} = u^{2} + 2as[/tex]
= [tex]0 + 2 \times 4.03 \times 17.2[/tex]
= 138.63 m/s
Hence, the speed she is traveling when she reaches the bottom of the slide is 138.63 m/s.
Answer:
Explanation:
mass, m = 57.4 kg
distance, d = 17.2 m
angle of inclination, θ = 28.1°
initial velocity, u = 0 m/s
coefficient of kinetic friction, μk = 0.108
(a) N is the normal reaction acting on the student.
N = mg Cosθ
N = 57.4 x 9.8 x Cos 28.1
N = 496.2 N
Friction force = μk x N
Friction force = 0.108 x 496.2 = 53.6 N
Let a is the acceleration
ma = mg Sinθ - friction force
ma = 57.4 x 9.8 x Sin 28.1 - 53.6
a = 3.7 m/s²
Let the speed is v.
v² = u² + 2ad
v² = 0 + 2 x 3.7 x 17.2
v = 11.3 m/s
A woman fires a rifle with barrel length of 0.5400 m. Let (0, 0) be where the 125 g bullet begins to move, and the bullet travels in the +x-direction. The force exerted by the expanding gas on the bullet is (16,000 + 10,000x − 26,000x2) N, where x is in meters. A) Determine the work done by the gas on the bullet as the bullet travels the length of the barrel.
B) If the barrel is 1.05 m long, how much work is done?
The work done by the gas on the bullet while the bullet travels the length of a 0.54m barrel was calculated to be 9,354.80 joules, and the work done for a 1.05m barrel length was calculated to be -5,712.50 joules.
Explanation:The work done by the force of the gas on the bullet can be determined by calculating the integral of the force with respect to x, from 0 to the length of the barrel. The force is a function of x, F(x) = 16,000 + 10,000x - 26,000x^2. The work done W = ∫F(x) dx, from x = 0 to x = 0.54 m.
By integrating this function we have, W = 16,000x + 5,000x^2 - 26,000x^3/3. Substituting the upper and the lower limits in, we get W = 9,354.80 joules.
For part B) we calculate work using the same formula but changing the length of the barrel to 1.05 m. The Calculated work done by the gas on the bullet, when the length of the barrel is 1.05 m, is W = -5,712.50 joules. Here, negative work signifies that the bullet is working against the direction of the force.
Learn more about Work done by Gas here:https://brainly.com/question/32263955
#SPJ3
To compute the work done by the gas on the bullet as it travels the length of the barrel, we use an integral to sum the work done over the length of the barrel. The force function given is integrated across the range from 0 to the length of the barrel (either 0.5400 m or 1.05 m).
Explanation:The work done by a variable force in one-dimension can be computed using the formula:
Work = ∫F(x) dx
Where F(x) is given as (16,000 + 10,000x - 26,000x^2) N and the limits of the integral are from 0 to the length of the barrel. For a 0.5400 m barrel, we evaluate the integral with these limits. Similar for the second part, using 1.05 m as the upper limit.
The actual calculations would involve integrating the function for force (F), and then substituting the limits of 0 and 0.5400 m or 1.05 m in the result to calculate the work done.
Learn more about Work Done by Variable Force here:https://brainly.com/question/35887929
#SPJ2
What are the correct methods of heat transfer
Explanation:
The transfer of heat generally depends on the difference in the temperature in the surroundings.The best methods for the transfer of heat are conduction convection, radiation and sometimes evaporation also.
Conduction: This is the transfer of heat through the system that is solid. Convection: Convection is the process in which warm surfaces of a liquid or gas rises to cooler surfaces in the liquid or gas that is the transfer of heat from the surface. Natural convection occurs as air is heated: it expands, rises, and is replaced by cooler air. Radiation: This is a process where energy is radiated among the surroundings in the form of electromagnetic radiation. Evaporation: The latent heat of a liquid is used to transfer heat by absorbing the energy needed to evaporate that liquid. The heat absorbed is released by condensing the liquid outside the enclosure.Answer:Condution radiation convection
Explanation:
A solenoid used to produce magnetic fields for research purposes is 2.2 mm long, with an inner radius of 25 cmcm and 1300 turns of wire. When running, the solenoid produced a field of 1.5 TT in the center.
Explanation:
Below is an attachment containing the solution.
A sample of octane (C8H18) that has a mass of 0.750 g is burned in a bomb calorimeter. As a result, the temperature of the calorimeter increases from 21.0°C to 41.0°C. The specific heat of the calorimeter is 1.50 J/(g • °C), and its mass is 1.00 kg. How much heat is released during the combustion of this sample? Use . 22.5 J 30.0 J 31.5 J 61.5 J
Answer:
Explanation:
mass, m = 1 kg
specific heat, c = 1.5 J/g°C
rise in temperature, ΔT = 41 - 21 = 20
heat released, H = m x c x ΔT
H = 1 x 1.5 x 1000 x 20
H = 30,000 J
H = 30 kJ.
Answer:
A) 22.5 JExplanation:
on edg I got it right
Laminar flow, where water moves in approximately straight-line paths, characterizes ________.
a. fast-moving streams
b. slow-moving streams
c. the edges of channels
d. the bottoms of channels
e. All of these
Answer:
b. slow-moving streams.
Explanation:
In Fluid Mechanics, the Reynolds numbers indicates the existence of turbulence in fluid streams. Low Reynolds numbers are related with laminar flow. The Reynolds formula is:
[tex]Re = \frac{\rho_{water} \cdot L_{c}}{\mu_{water}} \cdot v[/tex]
The Reynolds number is directly proportional to fluid speed. Hence, slow-moving streams are a sound example of laminar flow. The correct answer is B.
Cathy, a 460-N actress playing Peter Pan, is hoisted above the stage in order to "fly" by a stagehand pulling with a force of 60. N on a rope wrapped around a pulley system. What is the actual mechanical advantage of the pulley system?
Answer:7.67
Explanation:
Given
Weight of Cathy [tex]W_1=460\ N[/tex]
Force exerted by rope [tex]F=60\ N[/tex]
Mechanical advantage is the ratio of load by Pulling effort
[tex]M.A.=\frac{Load}{Pulling\ effort}[/tex]
[tex]M.A.=\frac{460}{60}[/tex]
[tex]M.A.=7.67\ N[/tex]
Final answer:
The actual mechanical advantage of the pulley system that hoists Cathy is calculated by dividing the load force (460 N) by the effort force (60 N), resulting in an actual mechanical advantage of approximately 7.67.
Explanation:
The actual mechanical advantage (MA) of a pulley system is the ratio of the load force to the effort force. Given that Cathy, a 460-N actress, is raised with an effort of 60 N, we can calculate the actual mechanical advantage by using the formula MA = Load/Effort. By dividing 460 N by 60 N, we get an actual mechanical advantage of approximately 7.67. This implies that the pulley system is using 7.67 times less effort force to lift the load, thus increasing the efficiency of the task.
Pulley systems can provide significant mechanical advantage by allowing a smaller effort force to move a larger load. This effectiveness is heightened if the pulleys are arranged in such a way as to multiply the tension in the ropes as they support the load. With perfectly friction-free pulleys and ropes, the MA can be simply counted as the number of ropes supporting the load, making the force output nearly an integral multiple of the input force.
What two quantities are crucial to quantifying the translational kinetic energy of an object?
Answer:
Moment of inertia and angular velocity.
Explanation:
The translational kinetic energy of an object is possessed when the object is showing rotational motion. It can be given by the formula as :
[tex]KE=\dfrac{1}{2}I\omega^2[/tex]
Here,
I is the moment of inertia of the object
[tex]\omega[/tex] is the angular velocity of the object
So, the translational kinetic energy of an object is given by moment of inertia and angular velocity of the object. Hence, this is the required solution.
A ball with mass M, moving horizontally at 4.00 m>s, collides elastically with a block with mass 3M that is initially hanging at rest from the ceiling on the end of a 50.0-cm wire. Find the maximum angle through which the block swings after it is hit.
Answer:
θ = 53.7°
Explanation:
Given:
- The mass of ball = M
- The mass of object = 3M
- The wire length L = 0.5 m
- The velocity of ball vi = 4.0 m/s
- The velocity of ball vf
- The velocity of object Vf
Find:
Find the maximum angle through which the block swings after it is hit.
Solution:
- When two objects collide with no external force acting on the system the linear momentum of the system is conserved. The initial (Pi) and final (Pf) linear momentum are equal:
Pi = Pf
M*vi = M*vf + 3M*Vf
vi = vf + 3*Vf
4 = vf + 3*Vf
- For elastic collision between two particles the relative velocities before and after collision have the same magnitude but opposite sign; so,
vi - 0 = Vf - vf
4 = Vf - vf
- Solve the above two equation simultaneously.
8 = 4*Vf
Vf = 2 m/s
vf = -2 m/s
- When the ball hits the object it swing under the influence of gravity only. Hence, no external force acts on the object so we can apply the conservation of energy as the object attains a height h.
ΔK.E = ΔP.E
0.5*(3M)*Vf^2 = (3M)*(g)*(h)
h = Vf^2 / 2*g
- Plug in the values:
h = 2^2 / 2*9.81
h = 0.2039 m
- We can see that the maximum angle can be given as θ according trigonometric relation as follows:
θ = arccos [ ( L - h ) / L ]
θ = arccos [ ( 0.5 - 0.2039 ) / 0.5 ]
θ = 53.7°
The maximum angle through which the block swings after it is hit θ is = 53.7°
Calculation of Mass
Given:
The mass of ball is = M
The mass of object is = 3M
The wire length L is = 0.5 m
The velocity of ball vi is = 4.0 m/s
Then The velocity of ball vf
After that The velocity of object Vf
Now we Find:
Find the maximum angle through which the block swings after it is hit that is :
When two objects collide with no external force acting on the system the linear momentum of the system is conserved. Then The initial (Pi) and also final (Pf) linear momentum are equal:
Pi is = Pf
M*vi is = M*vf + 3M*Vf
vi is = vf + 3*Vf
4 is = vf + 3*Vf
Now For elastic collision between two particles the relative velocities before and also after collision have the same magnitude but opposite signs; so,
vi - 0 is = Vf - vf
4 is = Vf - vf
Solve the above two equations simultaneously.
8 is = 4*Vf
Vf is = 2 m/s
vf is = -2 m/s
When the ball hits the object it swings under the influence of gravity only. Hence proof, no external force acts on the object so we can apply the conservation of energy as the object attains a height h.
ΔK.E is = ΔP.E
0.5*(3M)*Vf^2 is = (3M)*(g)*(h)
h is = Vf^2 / 2*g
Then we Plug in the values is:
h is = 2^2 / 2*9.81
h is = 0.2039 m
Now We can see that the maximum angle can be given as θ according trigonometric relation as follows:
θ is = arccos [ ( L - h ) / L ]
θ is = arccos [ ( 0.5 - 0.2039 ) / 0.5 ]
θ is = 53.7°
Find more information about Mass here:
https://brainly.com/question/13502329
The shuttles main engine provides 154,360 kg of thrust for 8 minutes. If the shuttle accelerated at 29m/s/s, and fires for at least 8 minutes, then how far does the shuttle go
Answer:
The answer to the question is
3340800 m far
Explanation:
To solve the question, we note that acceleration = 29 m/s²
Time of acceleration = 8 minutes
Then if the shuttle starts from rest, we have
S = u·t+0.5·a·t² where u = 0 m/s = initial velocity
S = distance traveled, m
a = acceleration of the motion, m/s²
t = time of travel
S = 0.5·a·t² = 0.5×29×(8×60)² = 3340800 m far
A charge of 28.0 nC is placed in a uniform electric field that is directed vertically upward and that has a magnitude of What work is done by the electric force when the charge moves (a) 0.450 m to the right; (b) 0.670 m upward; (c) 2.60 m at an angle of 45.0° downward from the horizontal?
Final answer:
When the charge moves 0.450 m to the right, the work done is zero. When the charge moves 0.670 m upward, the work done can be calculated as (28.0 nC * Electric Field) * 0.670 m. When the charge moves 2.60 m at an angle of 45.0° downward from the horizontal, the work done can be calculated as (28.0 nC * Electric Field * cos(45.0°)) * 2.60 m.
Explanation:
In order to calculate the work done by the electric force, we can use the equation:
Work = Force * Distance
For part (a) when the charge moves 0.450 m to the right, we need to calculate the force first using the equation:
Force = Charge * Electric Field
Given that the charge is 28.0 nC and the electric field is directed vertically upward, we should consider the vertical component of the electric field. Since the charge is moving horizontally to the right, it is perpendicular to the electric field and does not contribute to the work done by the electric force. Therefore, the work done is zero.
For part (b) when the charge moves 0.670 m upward, we can calculate the force using the same equation. Since the charge moves in the same direction as the electric field, the work done is positive. The work done can be calculated as:
Work = Force * Distance = (28.0 nC * Electric Field) * 0.670 m
For part (c) when the charge moves 2.60 m at an angle of 45.0° downward from the horizontal, we can break down the movement into horizontal and vertical components. The horizontal component does not contribute to the work done by the electric force since it is perpendicular to the electric field. The vertical component contributes to the work done. We can calculate the vertical component of the distance traveled using the angle and multiply it by the electric field to get the force. The work done can be calculated as:
Work = Force * Distance = (28.0 nC * Electric Field * cos(45.0°)) * 2.60 m
Harbor seals, like many animals, determine the direction from which a sound is coming by sensing the difference in arrival times at their two ears. A small difference in arrival times means that the object is in front of the seal; a larger difference means it is to the left or right. There is a minimum time difference that a seal can sense, and this leads to a limitation on a seal's direction sense. Seals can distinguish between two sounds that come from directions 3∘ apart in air, but this increases to 9∘ in water.Explain why you would expect a seal's directional discrimination to be worse in water than in air.
Answer:
that the angle must be increased to maintain the minimum time of discrimination due to the increase in the speed of sound in material
Explanation:
The direction of sound is detected by the difference in time of reception of each ear, the speed of the wave is
v = d / t
t = d / v
In air the velocity is v = 330 m / s, let's use trigonometry
Cos 3 = d / L
L = d / cos 3
The difference in distance is
Δd = d - d / cos 3 = d (1- 1 / cos3)
t = Δd / 330
When the animal is in the water the speed of sound is
v = 1540 m / s
So time is
t' = Δd ’/ 1540
t ’= Dd’ / 4.67 330
So if t = t’ is the minimum response time, the distance must be increased
Δd ’= 4.6 Δd
1-1 / cos θ = 4.6 (1- 1 / cos 3) = -4.6 0.00137 = -0.00631
1 + 0.0063 = 1 / cos θ
1.00631 = 1 / cos θ
Cos θ = 1 / 1.00631
Tea = 6.5
We see that the angle must be increased to maintain the minimum time of discrimination due to the increase in the speed of sound in material
A 328-kg car moving at 19.1 m/s in the + x direction hits from behind a second car moving at 13.0 m/s in the same direction. If the second car has a mass of 790 kg and a speed of 15.1 m/s right after the collision, what is the velocity of the first car after this sudden collision?
To find the velocity of the first car after the collision, we can use the principle of conservation of momentum.
Explanation:To find the velocity of the first car after the collision, we can use the principle of conservation of momentum. The total momentum before the collision is equal to the total momentum after the collision.
Before the collision:
Total momentum = (mass of first car × velocity of first car) + (mass of second car × velocity of second car)
After the collision:
Total momentum = (mass of first car × velocity of first car after collision) + (mass of second car × velocity of second car after collision)
Using the given information and the principle of conservation of momentum, we can solve for the velocity of the first car after the collision.
Learn more about Momentum here:https://brainly.com/question/30677308
#SPJ11
The 10 kg dancer leaps into the air with an initial velocity of 5 m/s at angle of 45° from the floor. How far will she travel in the air horizontally before she lands on the ground again?
Answer:
2.55 m
Explanation:
The motion of the dancer is the motion of a projectile, which consists of 2 independent motions:
- A uniform motion (constant velocity) along the horizontal direction
- A uniformly accelerated motion (constant acceleration) along the vertical direction
The horizontal range of a projectile can be found by using the equations of motions along the two directions, and it is given by:
[tex]d=\frac{v^2 sin(2\theta)}{g}[/tex]
where
v is the intial velocity
[tex]\theta[/tex] is the angle of projection
[tex]g=9.8 m/s^2[/tex] is the acceleration due to gravity
For the dancer in this problem, we have:
v = 5 m/s
[tex]\theta=45^{\circ}[/tex]
Therefore, the horizontal range is:
[tex]d=\frac{(5)^2(sin 2\cdot 45^{\circ})}{9.8}=2.55 m[/tex]
In a Broadway performance, an 83.0-kg actor swings from a R = 3.90-m-long cable that is horizontal when he starts. At the bottom of his arc, he picks up his 55.0-kg costar in an inelastic collision. What maximum height do they reach after their upward swing?
Answer:
[tex]h = 2.821\,m[/tex]
Explanation:
The speed of the actor before the collision is found by means of the Principle of Energy Conservation:
[tex](83\,kg)\cdot(9.807\,\frac{m}{s})\cdot (3.90\,m) = \frac{1}{2}\cdot (83\,kg)\cdot v^{2}[/tex]
[tex]v = \sqrt{2\cdot (9.807\,\frac{m}{s^{2}} )\cdot (3.90\,m)}[/tex]
[tex]v \approx 8.746\,\frac{m}{s}[/tex]
The speed after the inelastic collision is obtained by using the Principle of Momentum Conservation:
[tex](83\,kg)\cdot (8.746\,\frac{m}{s} )+(55\,kg)\cdot (0\,\frac{m}{s} ) = (83\,kg + 55\,kg)\cdot v[/tex]
[tex]v = 5.260\,\frac{m}{s}[/tex]
Lastly, the maximum height is determined by using the Principle of Energy Conservation again:
[tex]\frac{1}{2}\cdot (138\,kg)\cdot (5.260\,\frac{m}{s} )^{2} = (138\,kg)\cdot (9.807\,\frac{m}{s^{2}} )\cdot h[/tex]
[tex]h = \frac{(5.260\,\frac{m}{s} )^{2}}{9.807\,\frac{m}{s^{2}} }[/tex]
[tex]h = 2.821\,m[/tex]
A 0.50 kg object is at rest. A 2.88 N force to the right acts on the object during a time interval of 1.48 s. a) What is the velocity of the object at the end of this time interval? Answer in units of m/s.
Answer:
8.5m/s
Explanation:
We are given that
Mass of object=m=0.50 kg
Initial velocity, u=0
Force=F=2.88 N
Time=1.48 s
a.We know that
[tex]F=ma[/tex]
Using the formula
[tex]2.88=0.50a[/tex]
[tex]a=\frac{2.88}{0.50}=5.76m/s^2[/tex]
[tex]a=\frac{v-u}{t}[/tex]
Using the formula
[tex]5.76=\frac{v-0}{1.48}[/tex]
[tex]v=5.76\times 1.48=8.5m/s[/tex]
Hence, the velocity of the object at the end of this time interval=8.5m/s
From the following statements about mechanical waves, identify those that are true for transverse mechanical waves only, those that are true for longitudinal mechanical waves only, and those that are true for both types of waves.A. In longitudinal waves, the particles of the medium move parallel to the direction of the flow of energy.B. Many wave motions in nature are a combination of longitudinal and transverse motion.C. In transverse waves, the particles of the medium move perpendicular to the direction of the flow of energy.D. All of the above
Answer: D all of the above
Explanation:
All of the statements in the options are the character's exhibited by both longitudinal amd transverse waves.
Examples of transverse waves are water waves, light waves, radio waves, and also waves produced in strings and ropes.
Examples of longitudinal waves includes : vibrating turn fork,, drum head etc
Statement A is true for longitudinal waves only, statement C is true for transverse waves only, and statement B is true for both types of waves. These are based on the nature of particle movement in relation to the direction of wave energy flow.
Explanation:In the given statements, Statement A, 'In longitudinal waves, the particles of the medium move parallel to the direction of the flow of energy', is true solely for longitudinal mechanical waves. This is because, in longitudinal waves, the disturbances (or oscillations) in the medium occur in the same direction as the wave propagation, with notable examples being sound waves in air and water.
Statement C, 'In transverse waves, the particles of the medium move perpendicular to the direction of the flow of energy', on the other hand, pertains exclusively to transverse mechanical waves. Transverse waves are characterized by disturbances in the medium that are perpendicular to the direction of the wave propagation, common examples of which are waves seen on stringed instruments and electromagnetic waves, such as visible light.
Statement B, 'Many wave motions in nature are a combination of longitudinal and transverse motion', applies to both longitudinal and transverse mechanical waves. Certain seismic waves generated during earthquakes, for instance, possess both longitudinal and transverse components, demonstrating that waves can indeed display composite behaviors. Thus, in essence, this statement is true for both types of mechanical waves.
Learn more about Mechanical Waves here:https://brainly.com/question/24459019
#SPJ3
Collisions in two dimensions is a difficult section to read and understand. But, when we look at momentum similarly to our 'Sum of our Forces', then we can use the same concept to solve these problems. This means that the momentum in the x direction before the collision has to be as the momentum after the collision. The momentum in the y direction before the collision has to be as the momentum after the collision.1. True2. False
Answer:
2. TrueExplanation:
Since momentum is a vector, you, indeed, in two dimension collisions, you can decompose it in two components, the x-direction and the y-direction, such as you do with the force, which is a vector too.
The law of conservation of momentum states that the total momentum before and after the collision are conserved.
Let's assume a collision in one dimension: x-direction.
If object A is moving to the right, its momentum is to the right. If objcet B is at rest its momentum is zero. Then, if when object A collides with object B, the first stops, the second must move to the right with a momentum in the x-direction equal to the momentum that object A initially had.
You can apply the same reasoning if object A is moving in two dimensions, and, a similar one, if object B is not at rest: at the end the momentum in each direction before the collision has to be equal to the momentum in each direction after the collision.
a cart mass 3kg rolls down a slope. when it reaches the bottom a spring loaded gun fires a 0.5kg ball with horizontal velocity 0.6m/s. find final velocity of the cart
Answer:
the final velocity of the cart is 5.037m/s
Explanation:
Using the conservation of energy
[tex]T_a + V_a = T_b + V_b[/tex]
[tex]T_a = \frac{1}{2} (m_c + m_b)v_a^2[/tex]
[tex]T_a= \frac{1}{2} (3 + 0.5)(0)^2[/tex]
= 0
[tex]V_a = (m_c + m_b)gh_a[/tex]
[tex]V_a = (3 + 0.5) * 9.81 * 1.24[/tex]
[tex]= 42.918J[/tex]
[tex]T _b = \frac{1}{2} (3 + 0.5)v_b^2 \\\\ = 1.75v_b^2[/tex]
[tex]V_b = (3 + 0.5) * 9.81 * 0\\ = 0[/tex]
[tex]T_a + V_a = T_b + V_b\\ 0 + 12.918 = 1.75v_b^2 + 0\\v_b = 4.95m/s[/tex]
Using the conservation of linear momentum
[tex](m_c + m_b)v_B = m_cv_c + m_bv_b\\(3 + 0.5) * 4.95 = 3v_c - 0.5v_b\\17.33 = 3v_c - 0.5v_b\\v_b = 6v_c - 34.66 ...............(1)[/tex]
[tex]Utilizing the relative velocity relation = v_b - v_c\\-0.6 = -v_b - v_c\\v_b = 0.6 - v_c (2)[/tex]
equate (1) and (2)
[tex]6v_c - 34.66 = 0.6 - v_c\\7v_c = 35.26\\v_c = 5.037m/s[/tex]
the final velocity of the cart is 5.037m/s
LC oscillators have. been used to circuits. connected to loud speakers to create some of the sounds of electronic musc. What indductance must be usedd with a 6.7 uF capacito r to prodice a frequncy of 10
Answer:
[tex]3.8\times 10^{-8}\ H[/tex]
Explanation:
Given the [tex]6.7\mu F[/tex] capacitor is used in an LC circuit to produce [tex]10\ kHz[/tex] frequency.
We need to find the value of inductance required.
As we know the relation between angular frequency in [tex]rad/sec[/tex] and frequency in [tex]Hz[/tex] is.
[tex]\omega =2\times \pi\times f[/tex]
Where [tex]\omega[/tex] is angular frequency and [tex]f[/tex] is frequency.
[tex]\omega=2\times \pi\times 10\times 1000=20000\pi\ rad/sec\\\omega=62832\ rad/sec[/tex]
Also, the relation between the angular frequency, capacitance and inductance is given by.
[tex]\omega^2=\frac{1}{LC}\\\\L=\frac{1}{\omega^2C} \\\\L=\frac{1}{62832^2\times6.7\times 10^{-6} } \\\\L=\frac{1}{26451}.\\ \\L=3.8\times 10^{-8}\ H[/tex]
So, [tex]3.8\times 10^{-8}\ H[/tex] inductance will be required to produce [tex]10\ kHz[/tex].
During oxidation-reduction reactions, a material loses electrons to the oxidizer, which has a positive charge. Which power source directs these lost electrons through an electronic device to give it power?
A. An electric outlet
B. An electromagnet
C. An electric motor
D. A battery
Answer:
D. Battery
During the oxidation-reduction(redox) reaction, there is always flow of electrons from one point to another. The electrons are then converted to power through the battery which converts chemical energy to electrical energy. If there is zero flow of electrons then there will also be zero power.
Answer:
D. A battery.
Explanation:
A battery cell refers to a single anode and cathode separated by electrolyte used to produce a voltage and current. It is typically an electrolytic cell.
An electrolytic cell is an electrochemical cell that drives a non-spontaneous redox reaction through the application of electrical energy. They are often used to decompose chemical compounds, in a process called electrolysis.
The anode which is positive electrode undergoes oxidation i.e loss of electrons while the cathode(negative) undergoes reduction that is, accept electrons.
How can astrophysicists tell whether a star is receding from or approaching earth?
Answer:
Doppler shift of the starlight
Explanation:
To predict the movement of a star, we compare the spectra of elements found in star (H, He Na etc.), first spectra which are obtained from star and second spectra from laboratory. If spectral lines of the spectra obtained from star, are shifting towards red end (called red shift) then star is going away from earth and if shifting is towards blue (called blue shift), then star is approaching the earth. This is Doppler's shift.