Answer:
Now since mass of reactant is equal to mass of the product after the reaction so we can say that mass conservation is applicable here
Explanation:
As we know that zinc reacts with copper sulfate
so the reaction is given as
[tex]Zn + CuSO_4 --> ZnSO_4 + Cu[/tex]
so here we have
[tex]Zn = 10.1 g[/tex]
[tex]CuSO_4 = 18.6 g[/tex]
[tex]ZnSO_4 = 20 g[/tex]
[tex]Cu = 8.7 g[/tex]
Now total mass of reactant is given as
[tex]M_1 = 10.1 + 18.6 = 28.7 g[/tex]
Mass of the product is given as
[tex]M_2 = 20 + 8.7 = 28.7 g[/tex]
Now since mass of reactant is equal to mass of the product after the reaction so we can say that mass conservation is applicable here
Determining Current as a Function of Voltage
A set of data is collected from a simple circuit with a
20 2 resistor and is represented in the table.
Voltage
Current
Resistance
(V)
(A)
The current at 5.0 VisY A.
The current at 15 Vis a
5.0
20
15 T
I
20.
Answer:5.0 v is 0.25a
15v is 0.75a
Explanation:
1: A, 0.25
2: C, 0.75
Objects that are not moving have NO _____. A. mass (only) B. mass and momentum (only) C. velocity and momentum (only) D. mass, velocity, and momentum
Answer:
Objects that are not moving have NO velocity and momentum (only)
Explanation:
This best explains the potential energy of an object, when an object is at rest. it is said to have possessed a potential energy but without velocity and momentum i.e energy at rest
If two objects with different masses are pushing each other, which exerts the greater force?
A. The object with the greater mass exerts the greater force on the smaller object because the larger object has more inertia.
B. It is impossible to tell which object exerts the greater force unless we know which object accelerates.
C. The object with the smaller mass exerts the greater force on the larger object because it requires more force to make the larger object move.
D. They both exert the same amount of force on each other regardless of their mass, but in opposite directions.
Answer:
the answer is 100% A
Explanation:
Answer:
If two objects with different masses are pushing each other, which exerts the greater force?
The object with the greater mass exerts the greater force on the smaller object because the larger object has more inertia.
Explanation:
help? the first line is supposed to say "all _ has heat"
click the image
5. In Ohm's Law, "\" stands for
it is measured in amps.
O current
O resistance
Answer:current is measured in amps
Explanation:
Current measured in amps
Answer:
Current
Explanation:
Obviously
A cetain car weighs 25,000 N. Calculate the mass of the car.
245.000 kg
25,000 kg
9.81 m/s2
2,500 kg
Answer:2500kg
Explanation:
Weight of car(w)=25000N
Acceleration due to gravity approximately(g) 10m/s^2
Mass=w/g
Mass=25000/10
Mass=2500kg
is there carbon atoms in the compound Ca3N2
No, there are not any carbon atoms inside this compound.
The compound is [tex]Ca_3N_2[/tex]. This means there are 3 "Ca" atoms and 2 "N" atoms.
Ca is calciumN is nitrogenThus, none of the elements in this compound are carbon, meaning there are no carbon atoms. Let me know if you need any clarifications, thanks!
~ Padoru
What is Earth described as?
Answer:
Earth, our home, is the third planet from the sun. It's described as the only planet known to have an atmosphere containing free oxygen, oceans of water on its surface and, of course, life. Earth is also the fifth largest of the planets in the solar system. Hope this helped.
Explanation:
The differential distribution of ions across the cell membrane is due to the:
A. A lack of cell ATP
B. Difference in permeability of the cell membrane to ions
C. Resting membrane potential
D. Na+-K+-ATPase pump
The differential distribution of ions across the cell membrane is due to the "resting membrane potential".
Option: C
Explanation:
The unequal allocation of charged particles like ions between the internal and external portion of cell, and by the varying membrane permeability to various ion forms, understood as resting membrane potential.
Within a sleeping brain, Na+ and K+ ions exhibit concentration gradients throughout the membrane, which push their gradients down through channels, resulting in a differentiation of the charges that generates the resting potential. With K+ than Na+ ions, the membrane is even more permeable, so the resting potential is similar to potassium ion's equilibrium potential.
The differential distribution of ions across the cell membrane is largely due to the Na+-K+-ATPase pump, a protein that uses ATP to transport sodium and potassium ions against their concentration gradients. Other factors such as the membrane's ion permeability, the resting membrane potential, and ATP levels also contribute.
Explanation:The differential distribution of ions across the cell membrane is primarily due to the Na+-K+-ATPase pump, also known as the sodium-potassium pump. This protein structure uses energy from ATP to pump three sodium ions out of the cell and two potassium ions into the cell, establishing a concentration gradient. The difference in permeability of the cell membrane to various ions also plays a role in the differential distribution, but the Na+-K+-ATPase pump is the primary mechanism.
The resting membrane potential and cell ATP levels also indirectly influence ion distribution. The resting membrane potential is a result of the charge difference across the cell membrane due to the ion distribution, while a lack of ATP can affect the energy-dependent Na+-K+-ATPase pump's function.
Learn more about Na+-K+-ATPase pump here:https://brainly.com/question/38842807
#SPJ11
I need help for this exercise:
Crumple zones in cars increase the time and the distance over the which a car stop during a collision. The length of the crumple zone is 1.6m.
a) Find the maximum speed that the car could have when hitting a wall head-on without subjecting the passager to an acceleration of more than 46.2g (i.e., 46.2 times the acceleration due the gravity)
b) How long would that collision last?
Answer:
a) The maximum speed is 38 m/sb) The collision would last 0.083 s
Explanation:
By increasing the time and the distance over which a car stops during a collision, the change in the velocity (acceleration) is reduced, reducing, in consequence, the impact.
The equation to determine the change in velocity for a uniformly accelerated motion is given by the relation between the speed, the distance, and the acceleration:
v² - u² = 2×acceleration × distanceThe acceleration must be less than or equal to 46.2g, which is 46.2 × 9.8m/s² = 452.76m/s². Thus, the condition is acceleration ≤ 452.76m/s²
Here, using the maximum acceleration:
u = final velocity = 0acceleration = 457.76m/s²distance = 1.6 mThus:
v² = 2 (457.76m/s²) × 1.6mv = 38.06m/sv = 38 m/sTo determine the time use the impulse notion.
Impulse = Force × ΔtChange in momentum = mass × ΔvImpulse = Change in momentumForce × Δt = mass × ΔvForce / mass = Δv / Δtacceleration = Δv / ΔtSince the final velocity is 0 (the car stops), Δv is the speed of the car: Δv = v.
Substitute:
v/Δt = 457.76 m/s²Δt = v / 457.76 m/s²Δt = (38 m/s) / (457.76m/s²) = 0.083sFour ball are simultaneously launched with the same speed from the same height and h above the ground. At the same instant, ball 5 is released from the rest at the same height. Rank in order, from shortest to longest, the amount of time it takes each of these balls to hit the ground ( some maybe simultaneously.)
In this scenario of Physics involving free fall and projected motion, all the balls launched, whether from rest or different angles, from the same height will hit the ground simultaneously. The time of flight in such a case, considering no air resistance, will only depend on the initial height from the ground and the acceleration due to gravity, not on the initial speed or direction of projection.
Explanation:The question pertains to the physics concept of free fall and their time of flights. To reiterate, all the balls are being launched from the same height, h, including ball 5 which is released from rest. According to physics, irrespective of their initial velocities or launch angles, all objects in free fall will hit the ground at the same time assuming they are dropped from the same height. This is because the time a projectile is in the air is governed by its vertical motion alone and in this scenario, all the balls have the same vertical component which is the same height from which they are dropped. So, all of the balls including ball 5 will hit the ground simultaneously.
This understanding is backed by two key principles. One, that the horizontal and vertical motions of a projectile are independent of each other, meaning the horizontal velocity does not affect the vertical fall. Two, that the time of flight of a projectile is linearly proportional to the initial velocity in the y direction (height in this case) and inversely proportional to g (acceleration due to gravity). Considering the fact that all the balls start from rest, have the same height, and experience the same acceleration due to gravity, the time of flight for all balls becomes equal.
Learn more about Projectile Motion here:https://brainly.com/question/29545516
#SPJ3
Which numbers indicate the phases during which the moon is waxing?
A)1,5
B)2,3,4
C)5,6,7,8
D)2,3,4,5,6,7
Answer:
A
Explanation:
it is just right
When a light ray passes from LESS dense water (n = 1.33) into a MORE dense diamond (n = 2.419) at an angle of 45 degrees, its path is bend _____ the normal.
Towards
Explanation:
When light is incident at a transparent surface, the transmitted component of the light changes direction at the interface. Another component of the light is reflected at the surface. When a ray of light passes from water to diamond at an angle 45°, its path is bent towards the normal. This is so because water is less dense than the diamond. The refractive index of water (n = 1.33) is less than the refractive index of diamond (n = 2.419).
Light passing from less dense water to more dense diamond bends towards the normal due to a significant change in refractive indices.
When a light ray passes from less dense water (n = 1.33) into more dense diamond (n = 2.419) at an angle of 45 degrees, its path is bent towards the normal.
To calculate the angle of refraction, we can use Snell's Law: n1sinθ1 = n2sinθ2. Given n1 (water) = 1.33, n2 (diamond) = 2.419, and θ1 = 45°, we can solve for θ2.
The larger change in direction in diamond compared to water is due to the significant difference in refractive indices, leading to a greater impact on the path of the light ray.
Why and how is oil used to reduce the effects of friction in large machines
By reducing friction
Explanation:
A big machine is composed of several moving and stationary parts. Some of these parts are in a state of constant motion hence they periodically rub against each other. The friction between the body parts causes the body part to wear out and heat up in the process. This heat is symbolic of waste of energy.
The lubricating agents are a saviour in such conditions. Lubricating oils with high viscosities reduces friction. If we go deep into the working of the lubrication we find that the interacting parts of machines are quite rough when viewed under microscope. These rough surfaces when interact produce bumpy motion, wear and tear, heat etc.
Oil fills these microscopic voids and thus provides temporary relief. When these lubricated body parts interact, they encounter plain surface with decreased friction (due to high viscosity of the oils) and thus glide over each other freely thereby producing smooth movements, noiseless working.
In lab, your instructor generates a standing wave using a thin string of length L = 1.65 m fixed at both ends. You are told that the standing wave is produced by the superposition of traveling and reflected waves, where the incident traveling waves propagate in the +x direction with an amplitude A = 3.65 mm and a speed vx = 13.5 m/s . The first antinode of the standing wave is a distance of x = 27.5 cm from the left end of the string, while a light bead is placed a distance of 13.8 cm to the right of the first antinode. What is the maximum transverse speed vy of the bead?
The given standing wave on a string has a wavelength (λ) of 0.55 m, a frequency (f) of 24.54 Hz, a wave number (k) of 11.46 rad/m, and an angular frequency (ω) of 154.3 rad/s. The displacement of the bead at its position is given by the wave equation, and the maximum transverse speed (vy_max) is estimated to be approximately 0.4 m/s.
Length of the string (L) = 1.65 m
Amplitude of the traveling wave (A) = 3.65 mm
Speed of the traveling wave (vx) = 13.5 m/s
Distance of the first antinode from the left end (x) = 27.5 cm
Distance of the bead from the first antinode (d) = 13.8 cm
2. Finding the wavelength (λ):
Since the antinode is the point of maximum displacement, the first antinode is located at half the wavelength from the fixed end. Therefore,
λ = 2 * x = 2 * 0.275 m = 0.55 m
3. Finding the frequency (f):
We can use the relationship between wave speed, wavelength, and frequency:
v = λf
f = v / λ = 13.5 m/s / 0.55 m = 24.54 Hz
4. Finding the wave equation:
The equation for a standing wave on a string can be written as:
y(x, t) = A sin(kx) cos(ωt)
where:
k = wave number (k = 2π/λ)
ω = angular frequency (ω = 2πf)
5. Finding the wave number (k):
k = 2π/λ = 2π / 0.55 m = 11.46 rad/m
6. Finding the angular frequency (ω):
ω = 2πf = 2π * 24.54 Hz = 154.3 rad/s
7. Finding the displacement of the bead at its position:
The bead is located at x = x1 + d, where x1 is the distance of the first antinode from the left end (0.275 m) and d is the distance of the bead from the first antinode (0.138 m).
x1 + d = 0.275 m + 0.138 m = 0.413 m
Substitute this value of x in the wave equation:
y(0.413 m, t) = 3.65 mm * sin(11.46 rad/m * 0.413 m) * cos(154.3 rad/s * t)
8. Finding the maximum transverse speed (vy):
The maximum transverse speed occurs when the derivative of the displacement with respect to time (dy/dt) is at its maximum.
vy(t) = dy/dt = -Aω * cos(kx) sin(ωt)
The maximum value of sin(ωt) is 1, and the maximum value of cos(kx) depends on the position of the bead. Since the bead is not at a node or antinode, cos(kx) will not be 0 or 1.
Therefore, the maximum transverse speed (vy_max) can be estimated as:
vy_max ≈ Aω ≈ 3.65 mm * 154.3 rad/s ≈ 0.4 m/s
Why is the speed of sound faster in a humid and warm sea-level rainforest compared to the top of Mount Everest?
Answer: Because the speed of sound varies depending on the medium and its temperature.
Explanation:
Sound is a mechanical wave, this means its velocity of propagation depends on the medium.
Now, in general sound waves travel faster in solids than in liquids or gases. In addition, it varies with changes in the temperature of the medium. This is because an increase in temperature means that the frequency of interactions between the particles that transport the vibration increases, hence this increase in activity increases the speed.
So, the speed of sound in a gas (air, for example) is not constant, but depends on the temperature.
Hence, the higher the air temperature, the greater the velocity of propagation; that is why the speed of sound is faster in a humid and warm sea-level rainforest compared to the top of Mount Everest, which is cold.
How do you find the value of e?
refractive index = sin i / sin e
where i is the angle of incidence
e is the angle of refraction
1.5 = sin 35 / sin e
1.5 = 0.5736/sin e
sin e = 0.5736/ 1.5
sin e = 0.3824
e = 22.48°
The moon’s relative motion causes
Answer: Different cycles of the moon and ocean currents are all I can think of.
Answer:
Different cycles of the moon and ocean currents.
Explanation:
A 59 kg man has a total mechanical energy of 150,023. J. If he is swinging downward and is currently 2.6 m above the ground, what is his speed ?
Answer:
71
Explanation:
A 59 kg man has a total mechanical energy of 150,023. J. If he is swinging downward and is currently 2.6 m above the ground, his speed 71 m/sec.
What is energy?Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.
Using conservation of energy
m*g*h + 0.5 m*v² = 150023 joule
59*9.8*2.6 + 0.5*59*v² = 150023
1503.32 + 29.5 v² = 150023
29.5 v² = 148519.60
v² = 5034.56
v = 70.95 = 71 m/sec
A 59 kg man has a total mechanical energy of 150,023. J. If he is swinging downward and is currently 2.6 m above the ground, his speed 71 m/sec.
To learn more about energy refer to the link:
brainly.com/question/1932868
#SPJ2
which type of energy is stored in a stretched string on the bow in the following figure
Answer:
potential energy
Explanation:
Answer: Elastic Potential Energy
Explanation: For stretched material such as ropes or strings they have a certain form of energy that allows them to stretch or compress. The energy is called elastic energy. For the case of the string on the bow it possess Elastic Potential Energy since there is no motion in the string.
A 63 kg astronaut drifting with 7.0 m/s to the right with
respect to a spacecraft uses a jetpack to slow down.
Suppose it takes 14.0 s to come to a stop with respect to the spacecraft. What is the force exerted by the jetpack?
Answer:
31.5N
Explanation:
M = 63kg, v = 7.0m/s t = 14.0s F =?
Force = Mass * acceleration
but acceleration = change in velocity / time
a = dV/dt
F = (63 * 7.0) / 14
F = 31.5N
To calculate the force exerted by the jetpack, we use the astronaut's deceleration and mass. The deceleration is obtained from the change in velocity (from 7.0 m/s to 0 m/s in 14.0 s). Applying Newton's second law, the force equals to the mass (63 kg) multiplied by the deceleration (-0.5 m/s²), resulting in a force of 31.5 newtons in magnitude.
Explanation:The question is asking to calculate the force exerted by a jetpack that an astronaut uses to come to a stop relative to a spacecraft. First, we'll use the formula for acceleration (a) which is the change in velocity (Δv) divided by the change in time (Δt). In this case, the astronaut decelerates from 7.0 m/s to 0 m/s in 14.0 s, so the acceleration is -7.0 m/s divided by 14.0 s, which equals -0.5 m/s² (the negative sign indicates deceleration).
The next step is to apply Newton's second law of motion: F = ma, where F is the force, m is the mass, and a is the acceleration. Plugging in the values we have: F = 63 kg * (-0.5 m/s²) = -31.5 N. The negative sign indicates that the force is in the opposite direction of the initial velocity, i.e., to the left if the initial movement was to the right.
The magnitude of the force exerted by the jetpack is 31.5 newtons.
what is the position of the car at the end of the 10 secs?
Answer:
S=400m
Explanation:
Given t=10.and [tex]a=8m/s^2[/tex],
Initial velocity,[tex]u[/tex], of the car is zero.
To find distance,[tex]s[/tex]
[tex]S=ut+0.5at^2[/tex]
[tex]S=0\times10+0.5\times8\times10^2\\S=400m[/tex]
Therefore, car's position after 10seconds is 400m away from the start.
Desiree has a scientific question that she wants to investigate. She has developed a hypothesis and method for her experiment. Which step of scientific inquiry should Desiree take next?
Desiree should present her findings to her teacher and classmates.
Desiree should collect data, which may support or refute her hypothesis.
Desiree should provide an explanation for her results.
Answer:
Desiree should collect data, which may support or refute her hypothesis.
Explanation:
The next step Desiree must take is to collect data which might likely support or refute her hypothesis.
This is usually done by carrying out experiments or field studies.
The scientific method provides the steps through which knowledge of science is investigated. It usually starts with observation. After an observation is made, a scientific question is asked. This leads to the development of hypothesis. Then, experiments are carried out and data collect to either bolster the claim or refute it. Interpretation follows and conclusion is draw.Desiree should proceed to the step of collecting data, which may support or refute her hypothesis. Therefore option B is correct.
Collecting data is a crucial stage in the scientific inquiry process. It involves conducting experiments or observations to gather information that can either confirm or contradict the hypothesis she has formulated.
By systematically collecting and analyzing data, Desiree can draw conclusions based on empirical evidence. This step forms the backbone of scientific investigation as it provides the tangible information required to validate or revise her hypothesis.
Once she has sufficient data, Desiree can move on to analyzing her results and drawing meaningful conclusions, paving the way for the interpretation and potential communication of her findings.
Therefore option B is correct.
Know more about Desiree:
https://brainly.com/question/22086651
#SPJ3
what is nuclear radiation?
Answer:
noun. Physics. radiation in the form of elementary particles emitted by an atomic nucleus, as alpha rays or gamma rays, produced by decay of radioactive substances or by nuclear fission.
Explanation:
Nuclear radiation, or radioactivity, is energy and particles emitted by the nucleus in a nuclear reaction. It includes gamma-rays, alpha-particles, beta-particles, neutrons, and positrons. While useful in many areas, such as cancer detection and city powering, it can also pose health risks.
Explanation:Nuclear radiation, also known as radioactivity, is the energy and particles emitted by the nucleus during a nuclear reaction. It is a form of ionizing radiation, meaning the energy is sufficient to ionize matter, or change the structure of atoms.
Nuclear radiation includes gamma-rays (y-radiations), alpha-particles (a-particles), beta-particle (B-particles), neutrons (n), and positrons (3+-particles). These types of radiation originate from the radioactive decay of naturally occurring radionuclides.
While nuclear radiation is integral to many aspects of daily life, such as cancer detection, artifact study, city powering, it can also pose health risks. For instance, high doses of nuclear radiation can cause burns and hair loss.
Learn more about Nuclear Radiation here:https://brainly.com/question/11878930
#SPJ12
what device is made of coils of wire with an electrical current passing through it in order to generate a magnetic field
Transformer
Explanation:
A transformer is a device with two or more magnetically coupled windings. A time varying current in one coil (primary winding) generates a magnetic field which induces a voltage in the other coil (secondary winding). Transformers are capable of either increasing or decreasing the voltage and current levels of their supply, without modifying its frequency, or the amount of electrical power being transferred from one winding to another via the magnetic circuit. There are two types of transformer:
1. Step up transformer - increases voltage
2. Step down transformer - decreases voltage
What is an economic impact of biodiversity?
Answer:
Sustainability.
Explanation:
Each organism and living creature has its part to play, and with the diverseness, each one supports the other - the cycle of life and the food chain.
Explanation:
an economic part of biodiversity could be tourism so people would want to see all the different species so that may be good for hotels flight companies and tour guides it may also be good for zoo companies if they increase the different amount of species it could attract more people brainliest pls
for inclined plane derive efficiency =L/h
Answer: L=F/a
Explanation:
Efficiency of inclined plane is L/h VR.
What is meant by the efficiency of an inclined plane ?Efficiency of an inclined plane is defied as the ratio of effort in moving a body up or down without friction to that with friction.
Here,
The efficiency of an inclined plane,
η = MA/VR
η = (l/h)/ (dE/dl)
η = L/h (VR)
Hence, derived the efficiency for inclined plane is L/h VR.
To learn more about efficiency of inclined plane, click:
https://brainly.com/question/6242390
#SPJ2
A sample of gas has a volume of 42 L at a pressure of 200 kPa and a temperature of 30^ * C . What would be the volume, if the pressure were increased to 250 kPa and the temperature were decreased to 5^ * C ?
Answer:
30 L
Explanation:
Ideal gas law:
PV = nRT
Rearranging:
PV / T = nR
Since n and R are constant:
P₁ V₁ / T₁ = P₂ V₂ / T₂
Plugging in values and solving:
(200 kPa) (42 L) / (30 + 273.15 K) = (250 kPa) V / (5 + 273.15 K)
V = 30.8 L
Rounded to one significant figure, the new volume is 30 L.
in which medium does sound travel the fastest
Answer:
Solids
Explanation:
Aluminum
Explanation:
2. A 1.00 x 103 kg sports car accelerates from rest to 25.0 m/s in 7.50 s. What is the
average power output of automobile engine?
a. 20.8 kW
b. 30.3 kW
C. 41.7 kW
Answer:
C = 41.7kW
Explanation:
Data ;
Mass (M) = 1x10³kg
Initial velocity (u) = 0m/s
Final velocity (v) = 25m/s
Time (t) = 7.5s
Power = Work / time
Work = force * distance
acceleration = average velocity/ time
Acceleration = (25 - 0) / 7.5 = 3.3m/s²
Power = force * velocity (speed)
Average velocity = (25 - 0) / 2 = 12.5m/s
Force = mass * acceleration = 1x10³ * 3.3 = 3333.33N
Power = force * velocity
Power = 3333.33 * 12.5 / 41666.67W
Answer:
C. 41.7 kW
Explanation:
car's acceleration is the velocity difference over time: a = (v1 - v0)/t = (25 - 0)/7.5 = 3.3 m/s^2
The avg. power P = F * v
The avg. speed is thus v = (v0 + v1)/2 = (0 + 25)/2 = 12.5 m/s
F = m * a = 1*10^3 * 3.3 = 3,333 N
P = 3,333 * 12.5 = 41,667 W = 41.7 kW