The question is incomplete, complete question is:
For each trial, enter the amount of heat lost by the chemical system, qrxn.
Hints: The specific heat of water is 4.184 J/g°C. Be careful of your algebraic sign here and remember that the change in temperature is equal to the final temperature minus the initial temperature.
qrxn = - (qwater + qcalorimeter).
The heat gained by the calorimeter water, qwater, depends on the mass of water, the specific heat of water, Cpand ΔT, while the heat gained by the calorimeter, qcalorimeter, depends on the heat capacity, C and ΔT.
DATA : 1, 2, 3
[tex]T_i(^oC)[/tex] 24.2, 24.0 , 23.2
[tex]T_f(^oC)[/tex] 38.2, 37.8 , 36.6
Mass (g) 70.001 , 70.008 , 70.271
Explanation:
[tex]Q=mc\Delta T[/tex]
Where:
Q = heat absorbed or heat lost
c = specific heat of substance
m = Mass of the substance
ΔT = change in temperature of the substance
Trail 1
Heat absorbed by the water = [tex]Q_1[/tex]
Mass of water ,m,= 70.001 g
Specific heat water = c = 4.184 J/g°C
ΔT = [tex]T_f-T_i=38.2 ^oC - 24.2^oC = 14^oC[/tex]
[tex]Q_2=70.001 g\times 4.184 J/g^oC\times 14^oC=4,100.38 J[/tex]
Heat absorbed by the water is 4,100.38 J.
Trail 2
Heat absorbed by the water = [tex]Q_2[/tex]
Mass of water ,m,= 70.008 g
Specific heat water = c = 4.184 J/g°C
ΔT = [tex]T_f-T_i=37.8 ^oC - 24.0^oC = 14.2^oC[/tex]
[tex]Q_2=70.008 g\times 4.184 J/g^oC\times 14.2^oC=4,042.21 J[/tex]
Heat absorbed by the water is 4,042.21 J.
Trail 3
Heat absorbed by the water = [tex]Q_3[/tex]
Mass of water ,m,= 70.271 g
Specific heat water = c = 4.184 J/g°C
ΔT = [tex]T_f-T_i=36.6^oC - 23.2^oC = 13.4^oC[/tex]
[tex]Q_3=70.271 g\times 4.184 J/g^oC\times 13.18^oC=3939.78 J[/tex]
Heat absorbed by the water is 3,939.78 J.
Two different compounds are obtained by combining nitrogen with oxygen. The first compound results from combining 46.7 gg of NN with 53.3 gg of OO, and the second compound results from combining 17.9 gg of NN and 82.0 gg of OO. Calculate the ratio of the mass ratio of OO to NN in the second compound to the mass ratio of OO to NN in the first compound.
Answer:
4.02
Explanation:
The mass ratios will be given by dividing the mass of O₂ into the mass of N₂.
So lets do our calculations:
First Compound:
53.3 g O₂ / 46.7 g N₂ = 1.14
Second Compound:
82.0 g O₂ / 17.9 g N₂ = 4.58
Ratio = 4.58 / 1.14 = 4.02
This result for all practical purposes is a whole number, and it is telling us that there are 4 times as many oxygen atoms in the second coumpound as in the first compound. This is so because the ratio we just calculated is also the ratio in mol atoms:
Ratio = [ mass O₂ / MW O2/ mass N₂/ MW N₂] 2nd compound / [mass O₂ / MW O2/ mass N₂/ MW N₂ !st compound]
and the molecular weights cancel each other.
The only N and O compounds that follow this ratio are N₂O₄ and N₂O, and this question could be made in a multiple choice to match formulas.
Answer: 2
Explanation:
Two different compounds are obtained by combining nitrogen with oxygen. The first compound results from combining 46.7 g of N with 53.3 g of O, and the second compound results from combining 30.4 g of N and 69.6 g of O. Calculate the ratio of the mass ratio of O to N in the second compound to the mass ratio of O to N in the first compound.
2
The ratio of the mass ratio of O to N in the second compound to the mass ratio of O to N in the first compound is calculated as
mass of Omass of N in second compound ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯mass of Omass of N in first compound = 2.291.14 = 2
Thus, the mass ratio of O to N in the second compound is two times the mass ratio of O to N in the first compound.
An example of metal-bearing deposit formed when a sulphide liquid separated from an ultramafic magma by becoming supersaturated and immiscible is
Answer: SUDBURY, ONTARIO.
Explanation: SUDBURY,is a place in Ontario, Canada known to have been formed as a result of the separation of Sulphur liquid from ultramafic Magma by becoming supersaturated and immiscible. Over 100millions tons of Sulphur liquid and some quantities of other metals like Nickel,iron have been released into the atmosphere as a result of mining activities of that period.
Sudbury basin is famous for its geological feature that hosts about the largest concentrations of nickel-copper sulphides in the world is believed to have been formed by a meteorite impact 1.8 billion years ago.
A mass of 34.05 g of H2O(s) at 273 K is dropped into 185 g of H2O(l) at 310. K in an insulated container at 1 bar of pressure. Calculate the temperature of the system once equi- librium has been reached. Assume that CP, m for H2O is con- stant at its values for 298 K throughout the temperature range of interest.
Answer:
The temperature of the system once equilibrium is reached, is 292 Kelvin
Explanation:
Step 1: Data given
Mass of H2O = 34.05 grams
⇒ temperature = 273 K
Mass of H2O at 310 K = 185 grams
Pressure = 1 bar = 0.9869 atm
Step 2: Calculate the final temperature
n(ice)*ΔH(ice fusion) + n(ice)*CP(H2O)(Tfinal- Ti,ice) + n(H20)*CP(H2O)*(Tfinal-Ti,H2O) = 0
Tfinal = [n(ice)*CP(ice)*Ti(ice) + n(H2O)*CP(H2O)*Ti(H20) - n(ice)*ΔH(ice fusion)] / [n(ice)*CP(ice) +n(H2O)*CP(H2O)]
⇒ with n(ice) = moles of ice = 34.05 grams / 18.02 g/mol = 1.890 moles
⇒ with CP(ice) = 75.3 J/K*mol
⇒ with Ti(ice) = the initial temperature of ice = 273 K
⇒ with n(H2O) = the moles of water = 185.0 grams / 18.02 g/mol = 10.27 moles
⇒ with CP(H2O) = CP(ice) = 75.3 J/K*mol
⇒ with Ti(H2O) = the initial temperature of the water = 310 K
⇒ with ΔH(ice, fusion) = 6010 J/mol
Tfinal = [1.890 moles * 75.3 J/K*mol * 273 + 10.27 mol * 75.3 J/K*mol * 310 K - 1.890 moles * 6010 J/mol] / [1.890 moles *75.3J/k*mol + 10.27 mol * 75.3 J/K*mol]
38852.541 + 239732.61 - 11358.9 = 267226.251
Tfinal= 291.8 ≈ 292 Kelvin
The temperature of the system once equilibrium is reached, is 292 Kelvin
We must use the principle of conservation of energy to equate the heat gained by the ice to the heat lost by the water, in a given equation, to calculate the final equilibrium temperature.
Explanation:The topic here is thermodynamics, specifically calculating the final equilibrium temperature when two substances are mixed. Given the information, we can apply the principle of conservation of energy, which in this context is the heat gained by one substance is equal to the heat lost by the other. In this case, the heat gained by the ice (H2O(s)) as it melts and increases in temperature is equal to the heat lost by the water (H2O(l)). Therefore, we have the equation 34.05 g * 1 kcal/kg * K *(T - 273 K) + 34.05 g * 80 Cal/g = 185 g * 1 kcal/kg*K *(310 K - T) where T is the final temperature to be solved.
Learn more about heat transfer here:https://brainly.com/question/34419089
#SPJ3
Chlorine is the most widely used disinfectant for killing pathogens during water treatment. Determine the kilograms of chlorine used daily at a water treatment plant handling 10,000 cubic meters per day of flow at a chlorine dosage of 10 mg/L. [Hint: Multiply the flow rate by the chlorine dosage and make appropriate conversions.] Ans
Explanation:
The given data is as follows.
Flow of chlorine (Q) = [tex]10,000 m^{3}/day[/tex]
Amount of liter present per day is as follows.
[tex]10,000 \times 10^{3} l/day[/tex]
It is given that dosage of chlorine will be as follows.
10 mg/l = [tex]10 \times 10^{-6}[/tex] kg/l
Therefore, total chlorine requirement is as follows.
Total chlorine requirement = [tex](10,000 \times 10^{3}) \times (10 \times 10^{-6})[/tex] kg/day
= 100 kg/day
Thus, we can conclude that the kilograms of chlorine used daily at the given water treatment plant is 100 kg/day.
As an EPA scientist studying catalytic converters and urban smog, you want to find Kc for the following reaction: 2 NO2 (g) ⇋ N2(g) + 2 O2(g) Kc = ?? Use the following data to find the unknown Kc:
1/2 N2 (g) + 1/2 O2 (g) ⇋ NO (g) Kc = 0.004
2NO2 (g) ⇋ 2NO (g) + O2 (g) Kc = 0.056
Answer:
3500
Explanation:
The equilibrium constant of the reaction which has to be calculated is:-
2 NO2 (g) ⇋ N2(g) + 2 O2(g)
The given chemical equation follows:
1/2 N2 (g) + 1/2 O2 (g) ⇋ NO (g)
The equilibrium constant for the above equation is 0.004.
We need to calculate the equilibrium constant for the reverse equation of above chemical equation and also double of the above chemical equation, which is:
2NO (g) ⇋ N2 (g) + O2 (g)
The equilibrium constant for the reverse double reaction will be the reciprocal of the initial reaction.
If the equation is multiplied by a factor of '2', the equilibrium constant of the reverse reaction will be the square of the equilibrium constant of initial reaction.
The value of equilibrium constant for reverse reaction is:
[tex]K_{eq}'=(\frac{1}{0.004})^2[/tex] = 62500
The given chemical equation follows:
2NO2 (g) ⇋ 2NO (g) + O2 (g)
The equilibrium constant for the above equation is 0.056.
Thus, adding the both reaction gives the original reaction. So, equilibrium constant is:- 62500 x 0.056 = 3500
Final answer:
By manipulating and combining the equilibrium constants of related reactions, we find that the Kc for the reaction 2 NO2 (g) ⇋ N2(g) + 2 O2(g) is approximately 3500.
Explanation:
To calculate the equilibrium constant Kc for the reaction 2 NO2 (g) ⇌ N2(g) + 2 O2(g), we need to relate it to the known Kc values of the related reactions:
1/2 N2 (g) + 1/2 O2 (g) ⇌ NO (g), Kc = 0.0042NO2 (g) ⇌ 2NO (g) + O2 (g), Kc = 0.056To find the Kc for the desired reaction, we use the concept of reaction quotients, where the product of the equilibrium constants of two related reactions that gives the target reaction when added together, equals the equilibrium constant of the target reaction. Mathematically, if the second reaction is reversed, its Kc is inverted. Then we can combine the two equations:
The equilibrium constant for the reverse double reaction will be the reciprocal of the initial reaction.
If the equation is multiplied by a factor of '2', the equilibrium constant of the reverse reaction will be the square of the equilibrium constant of initial reaction.
The value of equilibrium constant for reverse reaction is
K_(eq)'=((1)/(0.004))^2 = 62500
The given chemical equation follows:
2NO2 (g) ⇋ 2NO (g) + O2 (g)
The equilibrium constant for the above equation is 0.056.
Thus, adding the both reaction gives the original reaction. So, equilibrium constant is:- 62500 x 0.056 = 3500
Consider the chemical reaction :
????????H4 + ????????2 → c????????2 + ????H2????,
where ????, ????, c, and ???? are unknown positive integers. The reaction must be balanced; that is, the number of atoms of each element must be the same before and after the reaction. For example, because the number of oxygen atoms must remain the same, 2????=2c+????. While there are many possible choices for ????, ????, c, and ???? that balance the reaction, it is customary to use the smallest possible integers.
Balance this reaction.
The question is incomplete, here is the complete question:
Consider the chemical reaction:
[tex]aCH_4+bO_2\rightarrow cCO_2+dH_2O[/tex]
where a, b, c, and d are unknown positive integers. The reaction must be balanced; that is, the number of atoms of each element must be the same before and after the reaction. For example, because the number of oxygen atoms must remain the same, 2b=2c+d. While there are many possible choices for a, b, c, and d that balance the reaction, it is customary to use the smallest possible integers.
Balance this reaction.
Answer: The value of a, b, c and d in the given chemical equation are 1, 2, 1 and 2 respectively.
Explanation:
Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form.
This also means that total mass on the reactant side must be equal to the total mass on the product side.
For the given chemical reaction:
[tex]aCH_4+bO_2\rightarrow cCO_2+dH_2O[/tex]
On reactant side:
Number of carbon atoms = 1
Number of hydrogen atoms = 4
Number of oxygen atoms = 2
On product side:
Number of carbon atoms = 1
Number of hydrogen atoms = 2
Number of oxygen atoms = 3
We need to balance the number of hydrogen and oxygen atoms. So, the balanced equation for the given reaction becomes:
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
Hence, the value of a, b, c and d in the given chemical equation are 1, 2, 1 and 2 respectively.
Determine if the results of the following word problem adhere to the Law of Conservation of Mass. 1. A chemist combines 4.9 g of hydrogen gas with 9.4 grams of nitrogen gas to form 11.4 g of ammonia. 2.9 g of nitrogen gas is remaining
Answer: The results agree with the law of conservation of mass
Explanation:
The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction. On the reactant side, the total mass of reactants is 14.3g and the total product masses is also 14.3g. That implies that no mass was !most in the reaction. The sum of masses on the left hand side corresponds with sum of masses on the right hand side of the reaction equation.
All of the following statements concerning voltaic cells are true EXCEPT
1) oxidation occurs at the cathode.
2) a salt bridge allows cations and anions to move between the half-cells.
3) electrons flow from the anode to the cathode in the external circuit.
4) a voltaic cell can be used as a source of energy.
5) a voltaic cell consists of two-half cells.
Answer:
oxidation occurs at the cathode.
Explanation:
In a voltaic cell electrons move from anode to cathode. At the anode, species give up electrons. This is an oxidation reaction depicted by the oxidation half equation. At the cathode, species accept electrons and become reduced. This is depicted by the reduction half equation. In summary; in a Voltaic cell, oxidation occurs at the anode while reduction occurs at the cathode.
In a voltaic cell, oxidation does not occur at the cathode.
A voltaic cell is an electrochemical cell that converts chemical energy to electrical energy, hence it can be used as a source of energy. It consists of two separate half-cells. There is a salt bridge between the two half cells allowing for the free flow of ions from one cell to another.
There are two electrodes, the anode undergoes oxidation and the cathode undergoes reduction. Electrons flow from the anode to the cathode.
Find out more at: https://brainly.com/question/1370699
Draw a structure for an amine that exhibits a molecular ion at M+ = 87 and that produces fragments at m/z = 72 and m/z = 58.
Answer:
The amine is N-methylbutan-2-amine and the structure is drawn below.
Explanation:
In order to find out the correct structure for said data we will first try out to find the molecular formula by applying rule of thirteen.
Rule of Thirteen:
First divide the parent peak value by 13 as,
= 87 ÷ 13
= 6.6923
Now, multiply 13 by 6,
= 13 × 6 (here, 6 specifies number of carbon atoms)
= 78
Now subtract 78 from 87,
= 87 - 78
= 9
Add 9 into 11,
= 9 + 6
= 15 (hydrogen atoms)
So, the rough formula we have is,
C₆H₁₅
Now, add one Nitrogen atom to above formula and subtract one Carbon and 2 Hydrogen atoms as these numbers are equal to atomic mass of Nitrogen atom as,
C₆H₁₅ -------N--------> C₅H₁₃N
Hence, the molecular formula is C₅H₁₃N.
The correct structural formula is being predicted by using the stability of the fragments formed by the cleavage of the parent molecule. Therefore, as shown below, following secondary (stable) carbocations are formed as the major fragments.
A student needs to convert a volume of 3 Tbsp (tablespoons) to mL. The student finds out that 1 tablespoon is equivalent to 14.79 mL. Choose the correct numbers and units that must be found in the conversion factor to solve this problem.
Answer:
The conversion factor is 14.79 mL/Tbsp.
Explanation:
To do an unity conversiton, we can make a factor by a ratio transformation:
[tex]3 Tbsp * \frac{14.79 mL}{1Tbsp}[/tex]
So, the conversion factor is 14.79 mL/Tbsp and 3 Tbsp has 44.37 mL.
The conversion factor of the tablespoon to volume has been 14.79mL/tablespoon.
Conversion factor has been defined as the unit that has been used to convert one unit range to another.
The computation with the conversion factor has been used in the system for the calculations and transform in the reactions.
Conversion factor for tablespoon to mLThe estimated value of 1 tablespoon has been found to be 14.79 mL. The conversion of 3 tablespoons to mL has been given as:
[tex]\rm 1\;tablespoons=14.79 \;mL\\3\;table spoons=3\;\times\;14.79 \;mL\\3\;tablespoons=44.37\;mL[/tex]
The volume of 3 tablespoon solution has been 44.37 mL.
The conversion has been performed with 1 tablespoon equivalent to 14.79 mL.
Thus, the conversion factor of the tablespoon to volume has been 14.79mL/tablespoon.
Learn more about conversion factor, here:
https://brainly.com/question/6988886
A solution is made by mixing 36. g of heptane (C_7H_16) and 16. g of chloroform (CHCl_3). Calculate the mole fraction of heptane in this sol'. Be sure your answer has the correct number of significant digits.
Answer:
Mole fraction of solute (heptane) → 0.73
Explanation:
Mole fraction = Moles of solute or solvent / Total moles
Let's calculate the moles of everything:
Moles of solute → Mass of solute / Molar mass
36 g / 100 g/mol = 0.36 moles
Moles of solvent → Mass of solvent / Molar mass
16 g / 119.35 g/mol = 0.134 moles
Total moles = 0.36 + 0.134 = 0.494 moles
Mole fraction of solute = 0.36 / 0.494 → 0.73
The proper solvent choice is crucial for effective recrystallization.
What are the features of a good recrystallization solvent?
a)The solvent should dissolve a moderate quantity of the target substance near its boiling point but only a small quantity near 0 °C.
b)The solvent should not react with the target substance.
c)The crude compound should be soluble in this solvent at room temperature.
d)The solvent should be easily removed from the purified product.
e)The solvent should have a high boiling point.
Answer: option A. The solvent should dissolve a moderate quantity of the target substance near its boiling point but only a small quantity near 0 °C
Explanation:
Final answer:
A good recrystallization solvent should dissolve the substance near its boiling point but not at low temperatures, must not react with the substance, should be easily removed post-process, and ideally, should have a low boiling point to prevent 'oiling out'.
Explanation:
Features of a Good Recrystallization Solvent
The process of recrystallization is integral to purifying solid compounds in chemistry, and the choice of solvent is critical for its success. A good recrystallization solvent should have the following features:
The solvent should dissolve a significant quantity of the target substance near its boiling point and only a minimal quantity near 0 °C, allowing for recrystallization upon cooling.The solvent should not react with the target substance, thereby preventing chemical changes during the process.The crude compound should be insoluble in the solvent at room temperature; this ensures that the compound remains undissolved until heated.Following the recrystallization, the solvent should be easily removed from the purified product, typically via evaporation due to its relatively low boiling point.While a high boiling point is not ideal, the solvent's boiling point should be sufficient to dissolve the substance when heated.Additionally, ideal solvents are usually unreactive, inexpensive, and have low toxicity. Using a solvent with a relatively low boiling point is preferable as it reduces the chance of the compound 'oiling out' during the process, which can interfere with crystal formation. Mixed solvents can be used when no single solvent meets all criteria, though a single solvent is often best to maintain consistent solubility conditions.
determine whether each of the following electron configurations is an inert gas, a halogen, an alkali metal, an alkaline earth metal, or a transition metal. Justify your choices.
This is an incomplete question, here is a complete question.
Determine whether each of the following electron configurations is an inert gas, a halogen, an alkali metal, an alkaline earth metal, or a transition metal. Justify your choices.
(a) [tex]1s^22s^22p^63s^23p^5[/tex]
(b) [tex]1s^22s^22p^63s^23p^63d^74s^2[/tex]
(c) [tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^6[/tex]
(d) [tex]1s^22s^22p^63s^23p^63d^4s^1[/tex]
Answer :
(a) [tex]1s^22s^22p^63s^23p^5[/tex] → Halogen
(b) [tex]1s^22s^22p^63s^23p^63d^74s^2[/tex] → Transition metal
(c) [tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^6[/tex] → Transition metal
(d) [tex]1s^22s^22p^63s^23p^63d^4s^1[/tex] → Transition metal
Explanation :
Inert gas : These are the gases which lie in group 18.
Their general electronic configuration is: [tex]ns^2np^6[/tex] where n is the outermost shell.
Halogen : These are the elements which lie in group 17.
Their general electronic configuration is: [tex]ns^2np^5[/tex] where n is the outermost shell.
An alkali metal : These are the elements which lie in group 1.
Their general electronic configuration is: [tex]ns^1[/tex] where n is the outermost shell.
An alkaline earth metal : These are the elements which lie in group 2.
Their general electronic configuration is: [tex]ns^2[/tex] where n is the outermost shell.
Transition elements : They are the elements which lie between 's' and 'p' block elements. These are the elements which lie in group 3 to 12. The valence electrons of these elements enter d-orbital.
Their general electronic configuration is: [tex](n-1)d^{1-10}ns^{0-2}[/tex] where n is the outermost shell.
(a) [tex]1s^22s^22p^63s^23p^5[/tex]
The element having this electronic configuration belongs to the halogen family.
(b) [tex]1s^22s^22p^63s^23p^63d^74s^2[/tex]
The element having this electronic configuration belongs to the transition family.
(c) [tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^6[/tex]
The element having this electronic configuration belongs to the transition family.
(d) [tex]1s^22s^22p^63s^23p^63d^4s^1[/tex]
The element having this electronic configuration belongs to the transition family.
1. [tex][Ar]4s^2 3d^10 4p^6[/tex] is an inert gas (krypton, Kr).
2. [tex][Kr]5s^2 4d^10 5p^2[/tex] is a transition metal (zinc, Zn).
3. [tex][He]2s^1[/tex] is an alkali metal (lithium, Li).
4. [tex][Ne]3s^2 3p^5[/tex] is a halogen (chlorine, Cl).
5. [tex][Ar]4s^2[/tex] is an alkaline earth metal (calcium, Ca).
6. [tex][Xe]6s^2 4f^14 5d^10 6p^3[/tex] is not a transition metal but a post-transition metal (bismuth, Bi).
To determine the type of element based on its electron configuration, one must understand the characteristic configurations of the different groups of elements in the periodic table. Here are some general rules:
- Inert gases (also known as noble gases) have completely filled s and p subshells in their valence shell. Their configurations typically end in [tex]ns^2 np^6[/tex], except for helium, which has [tex]1s^2[/tex].
- Halogens have the [tex]ns^2 np^5[/tex] configuration in their valence shell, with the exception of helium, which has [tex]1s^2[/tex].
- Alkali metals have a single electron in their outermost s subshell, denoted as [tex]ns^1[/tex].
- Alkaline earth metals have two electrons in their outermost s subshell, denoted as [tex]ns^2[/tex].
- Transition metals have incompletely filled d subshells in their penultimate energy level. Their configurations typically start with [tex](n-1)d^1 to (n-1)d^10[/tex] in the valence shell.
Let's analyze the given electron configurations:
1. [tex][Ar]4s^2 3d^10 4p^6[/tex]
- This configuration has a filled 4s subshell, a filled 3d subshell (10 electrons), and a filled 4p subshell. It corresponds to the configuration of an inert gas, specifically krypton (Kr), which has the full configuration [tex][Ar]4s^2 3d^10 4p^6[/tex].
2. [tex][Kr]5s^2 4d^10 5p^2[/tex]
- This configuration has a filled 5s subshell and a filled 4d subshell, but the 5p subshell is not filled (only 2 electrons out of a possible 6). This does not correspond to an inert gas, a halogen, an alkali metal, or an alkaline earth metal. It is a configuration of an element in group 12, which is a transition metal. Specifically, this is the configuration for zinc (Zn).
3. [tex][He]2s^1[/tex]
- This configuration has a single electron in the 2s subshell, which is characteristic of an alkali metal. Specifically, this is the configuration for lithium (Li).
4. [tex][Ne]3s^2 3p^5[/tex]
- This configuration has a filled 3s subshell and the 3p subshell is missing one electron to be filled (5 electrons out of a possible 6). This is the configuration of a halogen, specifically chlorine (Cl).
5. [tex][Ar]4s^2[/tex]
- This configuration has a filled 4s subshell, which is characteristic of an alkaline earth metal. Specifically, this is the configuration for calcium (Ca).
6. [tex][Xe]6s^2 4f^14 5d^10 6p^3[/tex]
- This configuration has a filled 6s subshell, a filled 4f subshell (14 electrons), and a filled 5d subshell (10 electrons), but the 6p subshell is not filled (only 3 electrons out of a possible 6). This does not correspond to an inert gas, a halogen, an alkali metal, or an alkaline earth metal. It is the configuration of an element in group 13, which is not a transition metal but a post-transition metal. Specifically, this is the configuration for bismuth (Bi).
In summary:
1. [tex][Ar]4s^2 3d^10 4p^6[/tex] is an inert gas (krypton, Kr).
2. [tex][Kr]5s^2 4d^10 5p^2[/tex] is a transition metal (zinc, Zn).
3. [tex][He]2s^1[/tex] is an alkali metal (lithium, Li).
4. [tex][Ne]3s^2 3p^5[/tex] is a halogen (chlorine, Cl).
5. [tex][Ar]4s^2[/tex] is an alkaline earth metal (calcium, Ca).
6.[tex][Xe]6s^2 4f^14 5d^10 6p^3[/tex] is not a transition metal but a post-transition metal (bismuth, Bi).
Calculate the percent error of your average specific heat as compared to the accepted values listed.Report your answer to the correct number of significant figures. This may be 2 or 3 significant figures. Csp(Pb) = 0.128 J/goC; Csp(Al) = 0.900 J/goC; Csp(Cu) = 0.387 J/goC % Error =
Answer:
%Error for Al = 2.23
%Error for Cu=2.65
%Error for Pb= 1.59
Explanation:
Percentage error is the difference between a measured value and a true value as expressed in percent.
%Error =( True value - measured value )/True value ×100
If the measured value is less than true value
%Error = ( Measured value - True value) / True value × 100
If the measured value is greater than true value
For Pb, true value = 0.126J/g•C
Measured value =0.128J/g•C
%Error= (0.128-0.126)/0.126 ×100= 1.57
For Cu, true value = 0.377J/g•C
Measured value = 0.387J/g•C
%Error = (0.387-0.377)/0.377 ×100 =2.65
For Al, True value = 0.921J/g•C
Measured value = 0.900J/g•C
%Error= (0.921-0.900)/0.921 ×100 =2.23
A liter of water was found to contain 10 mg of benzene (C6H6). What is the concentration of benzene in mg/L, ppm, and molarity?
The concentration of benzene is 10 mg/L or 10 ppm. To find molarity, we convert the mass of benzene to moles using its molar mass and then divide by the volume of the solution in liters. The molarity of the benzene is 1.28 x 10^-4 M.
Explanation:The concentration of benzene in the liter of water is 10 mg/L. This is because the question states that 10 mg of benzene is dissolved in one liter of water, and this is directly the concentration in mg per liter. To express this concentration in parts per million (ppm), we recall that 1 ppm is equivalent to 1 mg of substance per liter of water, since the density of water is approximately 1 g/mL, and there are 1000 g in a liter of water. Therefore, the concentration in ppm is also 10 ppm.
To calculate the molarity of benzene, we must first determine the molar mass of benzene, which is 78.11 g/mol (C6H6: 6 x 12.01 for carbon + 6 x 1.008 for hydrogen). The number of moles of benzene in 10 mg can be found using the formula: moles = mass (g) / molar mass (g/mol). Since we have 10 mg, we must first convert this to grams: 10 mg = 0.01 g. Thus, the number of moles of benzene is 0.01 g / 78.11 g/mol = 1.28 x 10-4 moles. Given that this is the amount in 1 liter, the molarity is 1.28 x 10-4 M.
Final answer:
The concentration of benzene is 10 mg/L, which is equivalent to 10 ppm as 1 L of water is approximately 1 kg. To find molarity, convert mass to moles using the molar mass of benzene, resulting in a molarity of 1.28 x 10⁻⁴ M for benzene in the solution.
Explanation:
The concentration of benzene in the water is already provided in mg/L, which is 10 mg/L. To express this concentration in parts per million (ppm), we use the fact that ppm is equivalent to mg/kg. Since the density of water is approximately 1.00 g/mL, 1 L of water weighs 1000 g, or 1 kg. Therefore, 10 mg of benzene in 1 kg of water is also 10 ppm.
To calculate the molarity of benzene (C₆H₆), we need the molar mass of benzene which is approximately 78.11 g/mol. Using the formula molarity = moles of solute / liters of solution, we first convert mg to grams: 10 mg = 0.010 g. The number of moles of benzene is calculated as 0.010 g / 78.11 g/mol which gives us 1.28 x 10⁻⁴ moles. Therefore, the molarity of benzene in the solution is 1.28 x 10⁻⁴ M.
Which compound (s) has(have) a molecular ion at 117 and a peak at 1720 cm-1 in its IR spectrum?
Answer:
Ethyl Acetate with a chemical configuration of : CH3CO2CH2CH3
Explanation:
Ethyl Acetate has a density of 902 kg/m³, molar mass of 88.11 g/mol and posses a boiling point of 77.1 °C.
It is to be understood that ethyl acetate is the ester of ethanol and it is mostly produced in mass production and most especially used in the production of domestic materials especially materials like glue, efostics and dissolving agent. This is a highly toxic and flammable substance. However colorless and possess a sweet smell, it can be highly poisonous when ingested.
Alka-Seltzer® is an antacid. One of its active ingredients is NAHCO3. Write out an equation to show how Alka-Seltzer® neutralizes stomach acids (HCl).
Answer:
NaHCO3 + HCl --> NaCl + CO2 + H2O
Explanation:
NaHCO3 which is an acidic salt because of the replaceable H+ (Bronste lowry acid), by definition acid dissociates in water to release a proton.
NaHCO3 dissociates in water to give Na+, H3O+ and HCO3-
Stomach acid which is HCl also dissociates in water to give H3O+ and Cl-
The H3O+ and HCO3- combines briefly to form a weak carbonic acid almost immediately, which then further dissociates to form H2O and CO2. CO2 is burped out from the mouth.
Na+ and Cl- combines to form NaCl in water which is a table salt solution.
Below is an attachment containing the step by step reactions
One of the ingredients in Alka-Seltzer, sodium bicarbonate, reacts with stomach acid (HCl) to produce salt, water, and carbon dioxide, neutralizing the acid. This is represented by the equation NAHCO3 + HCl -> NaCl + H2O + CO2.
Explanation:The antacid Alka-Seltzer® contains an active ingredient called NAHCO3, also known as sodium bicarbonate. When Alka-Seltzer is taken, the sodium bicarbonate reacts with the stomach acid, or hydrochloric acid (HCl), to neutralize it. This chemical reaction can be represented by the equation: NAHCO3 + HCl -> NaCl + H2O + CO2. Thus, Alka-Seltzer works to relieve symptoms caused by excess stomach acid by producing salt, water, and carbon dioxide.
Learn more about Alka-Seltzer Neutralizing Acid here:https://brainly.com/question/32758314
#SPJ3
Whay is it important for a forensic scientist to have as much information as possible about the place where a possible drug substance was found?
Answer: it is important because the location of crime tells a lot about possible substances that may have been in the area, may affect the drug substance in question, thus helping in tracking location other substances, why they are there, who used or placed them, assisting you in resolving a scene of crime
Explanation:
Zinc metal reacts with silver nitrate according to the reaction:
Zn(s) + 2AgNO3(aq)Zn(NO3 )2 (aq) + 2Ag(s)
Calculate the mass of Ag that forms when 3.00g of zinc metal is placed in an aqueous solution containing 3.75g of silver nitrate?
Answer: 2.38 grams of silver forms when 3.00g of zinc metal is placed in an aqueous solution containing 3.75g of silver nitrate.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ....(1)
[tex]\text{Number of moles of zinc}=\frac{3.00g}{65g/mol}=0.0462mol[/tex]
[tex]\text{Number of moles of silver nitrate}=\frac{3.75g}{170g/mol}=0.0220mol[/tex]
The chemical equation is:
[tex]Zn(s)+2AgNO_3(aq)\rightarrow Zn(NO_3)_2(aq)+1Ag(s)[/tex]
By stoichiometry of the reaction;
2 moles of silver nitrate reacts with 1 mole of zinc
Thus 0.0220 moles silver nitrate react with=[tex]\frac{1}{2}\times 0.0220=0.0110[/tex] moles of zinc
Thus silver nitrate will acts as limiting reagent and zinc acts as excess reagent.
2 moles of silver nitrate produces 2 mole of silver
Thus 0.0220 moles silver nitrate react with=[tex]\frac{2}{2}\times 0.0220=0.0220[/tex] moles of silver
[tex]0.0220mol=\frac{\text{Mass of silver}}{108g/mol}\\\\\text{Mass of silver}=2.38g[/tex]
Thus 2.38 grams of silver forms when 3.00g of zinc metal is placed in an aqueous solution containing 3.75g of silver nitrate.
Refer to the section in the Background titled, "Standard Tests Gaseous Products." Use a flaming splint and a glowing splint to identify the gas above the liquid in the cup. Write the name and formula of the gas in the space provided
To identify the gas above the liquid in the cup, you can use a flaming splint and a glowing splint. If the gas supports combustion, it is oxygen.
Explanation:The gas above the liquid in the cup can be identified using a flaming splint and a glowing splint. If the gas supports combustion and allows the flaming splint to burst into full flame, it is oxygen. If the gas extinguishes the glowing splint, it is a gas that does not contain oxygen. Oxygen is the only gas that will support combustion.
a. Determine the sign of the charge on each rod.
b.Compute the ratio of the linear charge densities on the two rods, .
Answer.
The electric field due to a negative charge points radially in from all directions (because a positive test charge placed near it would feel a force pointing toward it). Generally, electric field lines always point from positive charges and toward negative charges.
Your question I s incomplete, please endeavor you update your question with the necessary parameters.
How did the growth of ideals of mass democracy, including such concerns as expanding suffrage, public education, abolitionism, and care for the needy affect political life and discourse?
It had an impact on democratically incompatible systems, and it forced people to address those problems.
What is democracy?Democracy is defined as a system of government where the populace has the power to decide legislation and debate issues. Supporting democracy helps build a more safe, stable, and affluent global environment where the United States may advance its national interests in addition to advancing such core American principles as worker rights and freedom of religion.
Democratically incompatible system is defined as a type of government where the people themselves hold the ultimate power and exercise it either directly or indirectly through a system of representation that often includes regular free elections. Democracy that is guided by a constitution. Deliberative democracy is a system in which the key to making moral decisions is real deliberation, not just voting.
Thus, it had an impact on democratically incompatible systems, and it forced people to address those problems.
To learn more about democracy, refer to the link below:
https://brainly.com/question/13158670
#SPJ5
. In chemistry, one often uses a unit of charge known as the Faraday, F, which has the magnitude of the charge of 1 mole of electrons. How many Coulombs are there in a Faraday
Answer: 96500 Coulombs are there in a Faraday.
Explanation:-
It is given that 1 mole of electrons has charge of 1 Faraday.
Moles of electron = 1 mole
According to mole concept:
1 mole of an atom contains [tex]6.022\times 10^{23}[/tex] number of particles.
We know that:
Charge on 1 electron = [tex]1.6\times 10^{-19}C[/tex]
Charge on 1 mole of electrons = [tex]1.6\times 10^{-19}\times 6.022\times 10^{23}=96500C[/tex]
Thus 96500 C= 1 Faraday
Thus 96500 Coulombs are there in a Faraday.
There are approximately 96,485.33289 Coulombs in one Faraday.
The Faraday constant, denoted by F, is the charge of one mole of electrons. It is a fundamental physical constant with a value that has been experimentally determined. The Faraday constant is defined as the amount of charge carried by one mole of electrons, and its value is approximately 96,485.33289 Coulombs per mole.
The relationship between the Faraday constant and the charge in Coulombs can be expressed as:
[tex]\[ 1 \text{ Faraday} = 1 \text{ mole of electrons} \times \frac{6.022 \times 10^{23} \text{ electrons}}{1 \text{ mole of electrons}} \times \frac{1.602 \times 10^{-19} \text{ Coulombs}}{1 \text{ electron}} \][/tex]
Here, [tex]\(6.022 \times 10^{23}\)[/tex] is Avogadro's number, which is the number of particles (in this case, electrons) per mole, and [tex]\(1.602 \times 10^{-19}\)[/tex] is the elementary charge, which is the charge of a single electron in Coulombs.
Multiplying these values together gives:
[tex]\[ 1 \text{ Faraday} = 6.022 \times 10^{23} \times 1.602 \times 10^{-19} \text{ Coulombs} \] \[ 1 \text{ Faraday} = 96,485.33289 \text{ Coulombs} \][/tex]
Therefore, one Faraday is equivalent to approximately 96,485.33289 Coulombs. This is the standard value used in chemistry and physics for calculations involving the charge of electrons on a molar scale.
Calculate the molality of a solution formed by adding 4.40 g NH4Cl to 11.0 g of water.
To calculate the molality of a solution, divide the moles of solute by the mass of solvent (in kg). In this case, the molality of the NH4Cl solution is 7.45 m.
To calculate the molality of a solution, we need to first calculate the moles of NH4Cl and water.
Calculate the moles of NH4Cl by dividing the given mass by the molar mass of NH4Cl (53.49 g/mol): 4.40 g NH4Cl / 53.49 g/mol = 0.082 mol NH4Cl.
Calculate the moles of water by dividing the given mass by the molar mass of water (18.015 g/mol): 11.0 g H2O / 18.015 g/mol = 0.61 mol H2O.
Now we can calculate the molality using the moles of solute and the mass of the solvent:
Molality = moles of solute / mass of solvent (in kg)
Molality = 0.082 mol NH4Cl / 0.011 kg H2O = 7.45 m NH4Cl.
For more such question on molality visit:
https://brainly.com/question/13200956
#SPJ3
Draw the mechanism of polymerization of propylene with benzoyl peroxide. Show chemical structures and arrows and remember that radical stability is similar to carbocation stability. Thus, 3° radicals are more stable than 2° and so on.
Answer:
See explanation below
Explanation:
This mechanism of polimerization is of one type. This mechanism goes through free radical polimerization, which means that we use a initiator as the radical source, then, the polimerization begins with the breaking of the covalent bonds of that initiator. In this case the benzoyl peroxide. And this mechanism is given in three steps.
In the picture you have the mechanism in the 3 steps:
The compound zoapatanol was isolated from the leaves of a Mexican plant.
Classify each oxygen in zoapatanol according to the functional group to which it belongs. If an oxygen is part of an alcohol, classify the alcohol as primary, secondary, or tertiary.
Answer:
The structure is shown below!
1. Ketone
2. Secondary alcohol
3. Ether
4. Primary alcohol
Explanation:
The molecule of zoapatanol is shown below, each oxygen is marked by a number. The functional group represents the organic function of the substance. Some substances can have more than one function.
The oxygen is presented in several organic compounds, such as alcohol, aldehyde, ketone, ether, ester, carboxyl acid, and others. The structure of each is different, so an alcohol has the oxygen bonded to a carbon and to a hydrogen (called hydroxyl); an aldehyde has the oxygen bonded to a terminal carbon; a ketone has the oxygen bonded to nonterminal carbon; the ether has an oxygen between carbons; the ester has an oxygen between carbons, and one of these carbons has a double bond with other oxygen, and a carboxyl acid has the terminal carbon bonded to an oxygen and to a hydroxyl.
If the hydroxyl is bonded to a primary carbon (which is bonded to only one carbon), then it's a primary alcohol, if it's bonded to a secondary carbon (which is bonded to 2 carbons), then it's a secondary alcohol, and if it's bonded to a tertiary carbon (which is bonded to 3 carbons), then it's a tertiary alcohol.
Analyzing the structure, the oxygens are:
1. Ketone
2. Secondary alcohol
3. Ether
4. Primary alcohol
6. What is the electric potential energy of a +3.0 μC charge placed at corner A?
The question is incomplete. The complete question is stated below:
Two point charges are held at the corners of a rectangle as shown in the figure. The lengths of sides of the rectangle are 0.050 m and 0.150 m. Assume that the electric potential is defined to be zero at infinity.
a. Determine the electric potential at corner A.
b. What is the electric potential energy of a +3 µC charge placed at corner A?
Answer / Explanation:
a )V(A) = 1 / 4πe° ( - 5 5x10∧6C / 0.150m + 2x10∧6C / 0.050m )
The answer to the equation above is : = +6.0x10∧4 j/c
b) U(A) = qV(A)= (3.0x10∧6C) (6.0x10∧4 . j/c) =
The answer to the equation above is : =0.18 J
Explanation:
Where V(A) is equivalent to the electric potential
U(A) is equivalent to the electric potential energy
Final answer:
Explanation of electric potential energy in physics.
Explanation:
Electric potential energy is the energy a charge possesses due to its position in an electric field. It is given by the formula U = k * Q1 * Q2 / r, where k is Coulomb's constant, Q1 and Q2 are the charges, and r is the distance between them.
)V(A) = 1 / 4πe° ( - 5 5x10∧6C / 0.150m + 2x10∧6C / 0.050m )
The answer to the equation above is : = +6.0x10∧4 j/c
b) U(A) = qV(A)= (3.0x10∧6C) (6.0x10∧4 . j/c) =
The answer to the equation above is : =0.18 J
Select all that apply:
A)The mass ratio of oxygen to carbon in CO is twice the mass ratio of oxygen to carbon in CO2.
B)The mass ratio of oxygen to carbon in CO is 1.33 for every sample of CO.
C)mass ratio of oxygen to carbon in CO2 is 2.667 for every sample of CO2.
D)For two compounds of C and O, the mass ratio of C to O in one compound is a multiple of the mass ratio of C to O in the other compound.
Option B, C and D are correct.
Explanation:Carbon is a non metallic element with the atomic number 6 and mass number 12. Whereas oxygen is also a non metallic element with the atomic number 8 and mass number of 16.
In carbon monoxide, the mass ratio of oxygen to carbon is 16:12 =1.33. This ratio is same for every sample of carbon monoxide, because carbon monoxide has the universal formula of CO.
Similarly In carbon dioxide , the mass ratio of oxygen to carbon is 32:12 =2.667. This ratio is same for every sample of carbon dioxide, because carbon dioxide has the universal formula of [tex]CO_2[/tex].
Even we can see that the mass ratio of oxygen to carbon in carbon dioxide is just twice the mass ratio of oxygen to carbon in carbon monoxide, because of presence of twice as much as oxygen per molecule of carbon dioxide than carbon monoxide.
Which of the following aqueous solutions contains the greatest number of ions?
a. 400. mL of 0.10 M NaCl;
b. 300. mL of 0.10 M CaCl2;
c. 200. mL of 0.10 M FeCl3
Answer : The correct option is, (b) 300. mL of 0.10 M CaCl₂
Explanation :
We have to calculate the number of moles of ions for the following aqueous solutions.
(a) 400. mL of 0.10 M NaCl
[tex]NaCl\rightarrow Na^++Cl^-[/tex]
NaCl dissociates to give 2 moles of ions.
[tex]\text{Moles of ion}=\text{Molarity of }NaCl\times \text{Volume of solution (in L)}[/tex]
Volume of solution = 400. mL = 0.400 L
[tex]\text{Moles of ion}=0.10M\times 0.400L=0.04mol[/tex]
Total moles of ion = 0.04 mol × 2 = 0.08 mol
(b) 300. mL of 0.10 M CaCl₂
[tex]CaCl_2\rightarrow Ca^{2+}+2Cl^-[/tex]
CaCl₂ dissociates to give 3 moles of ions.
[tex]\text{Moles of ion}=\text{Molarity of }CaCl_2\times \text{Volume of solution (in L)}[/tex]
Volume of solution = 300. mL = 0.300 L
[tex]\text{Moles of ion}=0.10M\times 0.300L=0.03mol[/tex]
Total moles of ion = 0.03 mol × 3 = 0.09 mol
(c) 200. mL of 0.10 M FeCl₃
[tex]FeCl_3\rightarrow Fe^{3+}+3Cl^-[/tex]
FeCl₃ dissociates to give 4 moles of ions.
[tex]\text{Moles of ion}=\text{Molarity of }FeCl_3\times \text{Volume of solution (in L)}[/tex]
Volume of solution = 200. mL = 0.200 L
[tex]\text{Moles of ion}=0.10M\times 0.200L=0.02mol[/tex]
Total moles of ion = 0.02 mol × 4 = 0.08 mol
From this we conclude that, [tex]CaCl_2[/tex] aqueous solutions contains the greatest number of ions.
Hence, the correct option is, (b) 300. mL of 0.10 M CaCl₂
The aqueous solution that contains the greatest number of ions is b. 300. mL of 0.10 M CaCl₂.
a. The number of moles in 400. mL of 0.10 M NaCl is:
[tex]0.400 L \times \frac{0.10mol}{L} = 0.040mol[/tex]
Each mole of NaCl contains 2 moles of ions (1 Na⁺ and 1 Cl⁻). The moles of ions in 0.040 moles of NaCl are:
[tex]0.040molNaCl \times \frac{2molIons}{1molNaCl} = 0.080 mol Ions[/tex]
b. The number of moles in 300. mL of 0.10 M CaCl₂ is:
[tex]0.300 L \times \frac{0.10mol}{L} = 0.030mol[/tex]
Each mole of CaCl₂ contains 3 moles of ions (1 Ca²⁺ and 2 Cl⁻). The moles of ions in 0.030 moles of CaCl₂ are:
[tex]0.030molNaCl \times \frac{3molIons}{1molNaCl} = 0.090 mol Ions[/tex]
c. The number of moles in 200. mL of 0.10 M FeCl₃ is:
[tex]0.200 L \times \frac{0.10mol}{L} = 0.020mol[/tex]
Each mole of FeCl₃ contains 4 moles of ions (1 Fe³⁺ and 3 Cl⁻). The moles of ions in 0.020 moles of FeCl₃ are:
[tex]0.020molNaCl \times \frac{4molIons}{1molNaCl} = 0.080 mol Ions[/tex]
The aqueous solution that contains the greatest number of ions is b. 300. mL of 0.10 M CaCl₂.
Learn more: https://brainly.com/question/9492806
A student heats 2.796g of zinc powder with 2.414g of sulphur.He reported that he obtained 4.169g of zinc sulfide and recover 1.041g of unreacted sulfur.
Show by calculation whether or not his results obey the law of conversation of mass
Answer:
The mass of reactants and products are equal hence the reaction obeys law of conservation of mass
Explanation:
The law of mass conservation states that for a closed system to all transfer of mass, the mass of system must remain constant over time. This means for a chemical reaction, the mass of reactants must equal the mass of products.
if 2.796g of Zn reacts with 2.414g of sulphur to produce 4.169g of ZnS ad 1.041g of unreacted sulphur, then it means that accorfing to the law of mass conservation, the mass of reactants (zinc and sulphur), must be equal to mass of products (zinc sulfide and unreacted sulphur)
Mass of reactants = 2.796g + 2.414g =5.21g
Mass of products = 4.169g + 1.041g=5.21g
In accordance with the Law of Conservation of Mass, the total mass of the reactants (5.21g) is equal to the total mass of the products (5.21g). Therefore, the student's results obey the Law of Conservation of Mass.
Explanation:The Law of Conservation of Mass states that matter can neither be created nor destroyed. Therefore, the total mass of the reactants should be equal to the total mass of the products in a chemical reaction.
Let's add up the mass of the reactants:
Zinc: 2.796gSulphur: 2.414gTotal mass of reactants = 2.796g + 2.414g = 5.21g
Now, let's add up the mass of the products:
Zinc sulfide: 4.169gUnreacted sulphur: 1.041gTotal mass of products = 4.169g + 1.041g = 5.21g
As we can see, the total mass of the reactants is indeed equal to the total mass of the products. Thus, the student's results obey the Law of Conservation of Mass.
Learn more about Law of Conservation of Mass here:https://brainly.com/question/32183542
#SPJ3