Sam blew up a balloon and rubbed it on his head. Then he stuck the balloon on the wall. This was all the result of electrostatics or the transfer of charge. The appearance of negative charge on a balloon is the result of its gaining electrons. And these electrons must come from somewhere; in this case, from Sam's hair. Electrons are transferred in any charging process. In the case of charging by friction, they are transferred between the two objects being rubbed together. Prior to the charging, both objects are electrically neutral and the situation obeys the law of conservation of charge. How does the law of conservation of charge explain Sam and his balloon?
A) Friction creates charge that collected on the balloon.
B) The balloon gained electrons; Sam's hair gained protons.
C) If the balloon acquires charge, Sam's hair loses charge.
D) The net charge before is zero; the net charge after is negative.

Ben and Jerry, arch rivals, decide to have a weight lifting contest during PE. Ready, set, go! Ben and Jerry both lift a 250 kg barbell 10 times over their heads. They are approximately the same height and lift the barbell the same distance in the air. It takes Ben 5 seconds to complete 10 lifts; it takes Jerry 25 seconds to complete his 10 lifts.
Which statement is MOST accurate regarding the weightlifting contest?
A) Ben did more work than Jerry.
B) Ben has more power than Jerry.
C) Ben and Jerry have the same power.
D) Ben does more work and is more powerful than Jerry.

Answer:

0.89 nC

Explanation:

The strength of the electric field inside a parallel plate capacitor is given by

[tex]E=\frac{Q}{A \epsilon_0}[/tex] (1)

where

Q is the charge stored on one plate

A is the area of one plate

[tex]\epsilon_0[/tex] is the vacuum permittivity

For this problem, we have

[tex]E=1.0\cdot 10^6 N/C[/tex] is the electric field strength

the area of one plate is

[tex]A=1.0 cm\cdot 1.0 cm=(0.01 m)(0.01 m)=1\cdot 10^{-4} m^2[/tex]

Solving the formula (1) for Q, we find the charge on the positive electrode:

[tex]Q=EA\epsilon_0=(1.0\cdot 10^6 N/C)(1\cdot 10^{-4} m^2)(8.85\cdot 10^{-12} F/m)=8.85\cdot 10^{-10}C=0.89 nC[/tex]

Electric field exerts a force on all charged particles. The charge on the positive electrode is 8.854 x 10⁶ C.

An electric field can be thought to be a physical field that surrounds all the charged particles and exerts a force on all of them.

Given to us

Plate dimensions = 1.0 cm times 1.0 cm

Area of the plate = 0.0001 m²

Distance between the two plates, d = 2.9 mm = 0.0029 m

Electric field strength, [tex]\overrightarrow E[/tex] = 1.0 x 10⁶ N/C

We know that electric field inside a parallel plate capacitor is given as,

[tex]E = \dfrac{Q}{A\epsilon_0}[/tex]

Substitute the value,

[tex]1 \times 10^6 = \dfrac{Q}{0.0001\times 8.854 \times 10^{-12}}\\\\Q = 8.854 \times 10^{-10} \rm\ C[/tex]

Hence, the charge on the positive electrode is 8.854 x 10⁶ C.

Learn more about the Electric field:

https://brainly.com/question/4440057

Answer:

It is very rare to see a solar eclipse from your home, because the Earth, Sun, and the moon need to align just right.  Not everyone in the world can view a solar eclipse, only some area can.  A solar eclipse is where the moon blocks out the sun.  If you think about it:  Let's say you live in Florida, U.S.A.  You may see the moon coming in front of the sun, but if you lived in California or sumthin', the moon and the sun wouldn't be aligned to form a solar eclipse.  It all depends on location... so it is rare to see one.

Answer:

(Saturn ) is the homogeneous mixture

Answer:

Yes

Explanation:

The momentum of an object is given by:

[tex]p=mv[/tex]

where

m is the mass of the object

v is the velocity of the object

We know that an elephant has a mass much larger than the mass of an ant. However, we see that the momentum of the animal also depends on its velocity.

If the elephant is at rest, its velocity is zero:

v = 0

so its momentum is also zero:

p = 0

And therefore, an ant which is moving (so, non-zero speed) can have more momentum than an elephant, if the elephant is at rest.

Answer:

First- step 2

Second- step 1

Third- step 4

Fourth- step 3

Explanation:

You need to first make sure you have water or you can’t do any dissolving. Then you need boil it or nothings going to happen to the salt. And then you you can do the fourth step without doing the dissolving first hope this helped :)

An experiment is to determine how the temperature of water affects how much salt can be dissolved in it must be carried out in the correct sequence of steps.

In this experiment, the dependent variable is the amount of salt dissolved in the water, the independent variable is the temperature of the water. The correct sequence of steps in which the experiment should be carried out is;

Above are outlined the correct sequence of steps to carry out the experiment.

Learn more: https://brainly.com/question/967776

A mechanical wave is a disturbance in matter that transfers energy through the matter.

Mechanical waves require a medium to travel through, such as a solid, liquid, or gas.

Mechanical waves require a medium through which they can travel. The medium can be a solid, liquid, or gas. Examples of mechanical waves include water waves, sound waves, and seismic waves.

https://brainly.com/question/24459019

#SPJ6

The medium is the main factor that differentiates a mechanical wave from an electromagnetic wave, since the first can not propagate without its existence, while the second can propagate regardless of whether the medium exists or not.  

In addition, it is the medium that will define, the propagation speed of the wave, according to its specific physical characteristics.

Answer:

B

Explanation:

872 / 20 = 43

Answer:

True

Explanation:

Answer:Wind power is a clean energy source that we can rely on for the long-term future. A wind turbine creates reliable, cost-effective, pollution free energy. ... Because wind is a source of energy which is non-polluting and renewable, the turbines create power without using fossil fuels.

A star is born when the material of a nebula collapses due to the gravitational force of its elements. Converting this later into the nucleus of the new star, composed of hydrogen.

Then,  when this nucleus has reached sufficiently high density and temperature, it becomes helium by means of nuclear fusion (union of two light atoms), releasing energy in the process, which is the cause of the great luminosity of the star.

In other words, stars generate their own energy, in a process in which there is a balance between the gravitational pressure that compresses (contracts) matter and raises its temperature sufficiently for nuclear reactions to start, generating pressure in the opposite direction to the gravitational force by the heat produced in the reaction.

So, these nuclear reactions expand the star for most of its life, as long as this equilibrium exists.

a) 6.25 rad/s

The law of conservation of angular momentum states that the angular momentum must be conserved.

The angular momentum is given by:

[tex]L=I\omega[/tex]

where

I is the moment of inertia

[tex]\omega[/tex] is the angular speed

Since the angular momentum must be conserved, we can write

[tex]L_1 = L_2\\I_1 \omega_1 = I_2 \omega_2[/tex]

where we have

[tex]I_1 = 2.25 kg m^2[/tex] is the initial moment of inertia

[tex]\omega_1 = 5.00 rad/s[/tex] is the initial angular speed

[tex]I_2 = 2.25 kg m^2[/tex] is the final moment of inertia

[tex]\omega_2[/tex] is the final angular speed

Solving for [tex]\omega_2[/tex], we find

[tex]\omega_2 = \frac{I_1 \omega_1}{I_2}=\frac{(2.25 kg m^2)(5.00 rad/s)}{1.80 kg m^2}=6.25 rad/s[/tex]

b) 28.1 J and 35.2 J

The rotational kinetic energy is given by

[tex]K=\frac{1}{2}I\omega^2[/tex]

where

I is the moment of inertia

[tex]\omega[/tex] is the angular speed

Applying the formula, we have:

- Initial kinetic energy:

[tex]K=\frac{1}{2}(2.25 kg m^2)(5.00 rad/s)^2=28.1 J[/tex]

- Final kinetic energy:

[tex]K=\frac{1}{2}(1.80 kg m^2)(6.25 rad/s)^2=35.2 J[/tex]

To find the final angular speed, we can apply the conservation of angular momentum. The initial and final kinetic energies can be calculated using a formula involving the moment of inertia and angular velocity.

To solve this problem, we can apply the principle of conservation of angular momentum. When the figure skater pulls in her arms, her moment of inertia decreases, causing her angular velocity to increase according to the equation:

Ii * ωi = If * ωf

where Ii and If are the initial and final moments of inertia, and ωi and ωf are the initial and final angular velocities, respectively.

a) Plugging in the given values:

2.25 kg·m2 * 5.00 rad/s = 1.80 kg·m2 * (ωf)

Solving for ωf, we find that the final angular speed is 6.25 rad/s.

b) To calculate the initial and final kinetic energies, we can use the equation:

K.E. = (1/2) * I * ω2

Substituting the values into the equation:

Initial K.E. = (1/2) * 2.25 kg·m2 * (5.00 rad/s)2

Final K.E. = (1/2) * 1.80 kg·m2 * (6.25 rad/s)2

Calculating, we find that the initial kinetic energy is 28.125 J and the final kinetic energy is 42.19 J.

https://brainly.com/question/37906446

#SPJ3

Answer:

1807

Explanation:

Robert Fulton (1765–1815) was an American engineer and inventor who is widely known for developing a commercially successful steamboat called Clermont. In 1807, that steamboat took passengers from New York City to Albany and back again, a round trip of 300 miles, in 62 hours.

Robert Fulton invented the steamboat engine in 1807, significantly improving water transportation with the Clermont on the Hudson River, and facilitating economic growth and western settlement.

Robert Fulton invented the steamboat engine which was utilized in his first successful commercial steamboat, the Clermont, in 1807. Operating on the Hudson River, the Clermont was influential in transforming water transportation by allowing more reliable and quicker travel independent of wind. It traveled from New York City to Albany in a mere 32 hours. Fulton's innovation prompted widespread economic development, particularly in the Mississippi River Valley, and revolutionized the settlement of the West. By the 1830s, over a thousand steamboats were in operation. Yet, steamboats were prone to dangers such as boiler explosions, which eventually led to safety regulations.

According to Newton's law of Gravitation, the force [tex]F[/tex] exerted between two bodies or objects of masses [tex]m1[/tex] and [tex]m2[/tex]  and separated by a distance [tex]r[/tex]  is equal to the product of their masses divided by the square of the distance:

[tex]F=G\frac{(m1)(m2)}{r^2}[/tex]

Where [tex]G[/tex]is the gravitational constant.

As we can see, this force is directly proportional to the product of the masses and inversely proportional to the square of the distance between them.

This means that the gravity force decreases when the distance between these two bodies increases, and increases when the masses of the bodies increases.

The force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of their separation distance. It is significant with large masses or small separations and is fundamental in celestial mechanics, imparting weight and affecting planetary and satellite motions.

The force of gravity between two objects depends on certain factors. Newton's Universal Law of Gravitation states that this force is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. Consequently, as the masses of the two objects increase, the gravitational force between them also increases. Conversely, as the distance between the two objects increases, the gravitational force they exert on each other decreases with the square of that separation distance. This is a fundamental principle in understanding celestial mechanics and the behavior of objects under the influence of gravity.

It is also important to note that gravitational force is a relatively weak force compared to other forces in nature, such as electromagnetic forces, and it becomes significant only when involving objects with large masses or when objects are very close to each other. The force of gravity is what imparts weight to objects with mass and it plays a crucial role in the movements of planets, comets, and satellites within our solar system.

Because isotopes of an element have a different number of neutrons, they also have different mass numbers.

Answer:

Transverse

Explanation:

There are two types of waves, according to the direction of their oscillation:

- Transverse waves: in a transverse wave, the direction of the oscillation is perpendicular to the direction of motion of the wave. Examples of transverse waves are electromagnetic waves

- Longitudinal waves: in a longitudinal wave, the direction of the oscillation is parallel to the direction of motion of the wave. Examples of longitudinal waves are sound waves.

Light waves corresponds to the visible part of the electromagnetic spectrum, which includes all the different types of electromagnetic waves (which consist of oscillations of electric and magnetic fields that are perpendicular to the direction of propagation of the wave): therefore, they are transverse waves.

The battery voltage in this circuit with a 20-ohm resistor and a current of 2 amps is 40 volts.

In order to find the battery voltage, we can use Ohm's Law, which states that voltage (V) is equal to current (I) multiplied by resistance (R). In this case, the resistance is 20 ohms and the current is 2 amps. Using the formula V = IR, we can calculate the battery voltage as follows:

V = 2A * 20Ω = 40V

i think it's Basel Metabolism

Answer:

50.4°

Explanation:

Snell's law states:

n₁ sin θ₁ = n₂ sin θ₂

where n is the index of refraction and θ is the angle of incidence (relative to the normal).

When θ₁ = 48°:

n sin 48° = 1.33 sin 72°

n = 1.702

When θ₁ = 37°:

1.702 sin 37° = 1.33 sin θ

θ = 50.4°

The new angle of refraction in the water is [tex]50.35^{\circ}[/tex].

Given data:

The angle made by ray at glass-water interface is, [tex]\theta _{1} = 48^{\circ}[/tex].

The angle made by the refracted ray with the normal is, [tex]\theta_{2} = 72^{\circ}[/tex].

The index of refraction of water is, [tex]n=1.33[/tex].

The angle of incidence for the redirected glass is, [tex]\theta_{3} = 37^{\circ}[/tex].

The entire problem is based on the concepts of Snell's law, which says that the ratio of sine of angle of incidence to sine of angle of refraction is equal to the ratio of refractive index and incident index.

So on applying the Snell's law as,

[tex]n' \times sin \theta_{1} = n \times sin \theta_{2}[/tex]

Here, n' is the index of refraction of glass.

Solving as,

[tex]n' \times sin 48 = 1.33 \times sin 72\\\\n' = \dfrac{ 1.33 \times sin 72}{sin 48} \\\\n' =1.702[/tex]

For redirected condition, again apply the Snell' law as,

[tex]n' \times sin \theta_{3} = n \times sin \theta_{4}[/tex]

Here, [tex]\theta_{4}[/tex]  is the new angle of refraction in the water.

Solving as,

[tex]1.702 \times sin 37 = 1.33 \times sin \theta_{4}\\\\sin \theta_{4} = \dfrac{1.702 \times sin 37}{1.33} \\\\\theta_{4} =sin^{-1}(0.770)\\\\\theta_{4} =50.35^{\circ}[/tex]

Thus, we can conclude that the new angle of refraction in the water is [tex]50.35^{\circ}[/tex].

Learn more about the Snell's law here:

https://brainly.com/question/24181353

Answer:

Electromagnetic Spectrum

Explanation:

Explanation:

We are given this equation and we need to find the value of [tex]x[/tex]:

[tex]1+2e^x+1=9[/tex]   (1)

Firstly, we have to clear [tex]x[/tex]:

[tex]2e^x=9-1-1[/tex]  

[tex]2e^x=7[/tex]  

[tex]e^x=\frac{7}{2}[/tex]     (2)

Applying Natural Logarithm on both sides of the equation (2):

[tex]ln(e^x)=ln(\frac{7}{2})[/tex]     (3)

[tex]xln(e)=ln(\frac{7}{2})[/tex]     (4)

According to the Natural Logarithm rules [tex]xln(e)=x[/tex], so (4) can be written as:

[tex]x=ln(\frac{7}{2})[/tex]     (5)

Finally:

[tex]x=1.252[/tex]    

Answer:

b. amplitude

Explanation:

There are two types of intereference:

- Constructive interference: it occurs when two waves of same frequency meet at a point in phase - this means , the crest of one wave meets with the crest of the other wave. When this occurs, the resultant wave has an amplitude which is equal to the sum of the amplitudes of the two waves.

- Destructive interference: it occurs when two waves of same frequency meet at a point in opposite phase - this means , the crest of one wave meets with the trough of the other wave. When this occurs, the resultant wave has an amplitude which is equal to the difference between the amplitudes of the two waves.

When interference occurs, the other factors of the waves (period, frequency and wavelength) do not change.

In constructive interference, the factor that increases is the amplitude of the resulting wave. The amplitudes of the individual waves combine to produce a wave with greater amplitude, while the period, frequency, and wavelength remain unchanged.

When two waves meet and interfere constructively, the factor that increases is the amplitude of the resulting wave. Constructive interference occurs when waves are in phase and their crests (and troughs) align. The amplitudes of the individual waves add together, resulting in a wave with a greater amplitude. This is shown in various figures such as FIGURE 16.33 and FIGURE 27.11 in your provided references, which illustrate pure constructive interference producing a wave with twice the amplitude, but the same wavelength.

It is important to note that the period, frequency, and wavelength of a wave are not directly affected by interference. The period and frequency are inversely related, so when the period of a wave increases, its frequency decreases. However, this question refers to the effects of interference, not changes in the wave's frequency or period.

The relation between amplitude and frequency of a wave is that they are generally independent of each other; an increase in amplitude does not necessarily cause a change in frequency, and vice versa.

Answer:

It is directly proportional

Explanation:

For an ideal gas, the average kinetic energy of the particles and the temperature (in Kelvin) are directly proportional, according to the equation:

[tex]E_K = \frac{n}{2}kT[/tex]

where

Ek is the average kinetic energy

k is the Boltzmann constant

T is the absolute temperature

n is the number of degrees of freedom of the molecules in the gas (n=3 for monoatomic gases, n=5 for di-atomic gases, etc..)

Therefore, as the temperature of a gas increases, the average kinetic energy of the molecules increases proportionaly to it.

The temperature of a substance is proportional to the average kinetic energy of its particles, and as temperature increases, particles move faster, resulting in a wider range of kinetic energies, and the entropy of the substance increases.

Understanding Kinetic Energy and Temperature

Kinetic energy is the energy that particles have due to their motion. According to the kinetic-molecular theory, the temperature of a substance is directly proportional to the average kinetic energy of its particles. As the temperature increases, particles move faster, resulting in greater kinetic energy. The Boltzmann distribution illustrates that at higher temperatures, not only is the average kinetic energy higher, but the range of kinetic energies also becomes broader, indicating a larger distribution of speeds among the particles. In other words, there are more particles with energies significantly higher or lower than the average.

At absolute zero, the theoretical temperature where all kinetic motion ceases, particles would have no kinetic energy. However, in reality, substances increase their temperature by absorbing energy, which then increases the motion of their constituent particles. As a result, the energy of the particles in a substance can be simply related to the temperature of the substance using the equation E ≅ kT, where 'E' represents the typical kinetic energy of the particles and 'T' is the temperature in kelvins. The constant 'k' is Boltzmann's constant.

With an increase in temperature, solids will have more extensive vibrations, liquids will have more rapid translations, and gases will have faster-moving particles. This increase in energy transfer among particles results in a greater distribution of kinetic energies and also affects the entropy of the substance, which increases with temperature. A visual representation of the different average kinetic energies for particles at two temperatures can be seen in energy distribution curves where a flatter curve corresponds to a higher temperature.

Answer:

Wavelength

Explanation:

The wavelength of a transverse wave (where the oscillation occurs perpendicular to the direction of propagation of the wave) is defined as the distance between two consecutive crests ot two consecutive troughs.

In a longitudinal wave, where the oscillation occurs parallel to the direction of propagation of the wave, the wavelength is defined as the distance between two consecutive compressions or between two consecutive rarefactions.

Other important definitions for a wave are:

- Frequency: the number of complete cycles per second

- Period: the time needed for one complete cycle to occur

- Amplitude: the distance between the equilibrium position and the maximum displacement of the wave

Answer:

wavelength

Explanation:

Answer:

Radio waves

Explanation:

Answer:

radio waves

Explanation:

Answer:

-10.0 cm

Explanation:

OK so in the equation they're having you use the variables are:

[tex]d_o = 5.0 cm\\\\f = 10.0 cm\\\\d_i = ?[/tex]

So we simply plug in the variables:

[tex]d_i = \frac{d_of}{d_o-f} \\\\d_i = \frac{5.0 * 10.0}{5.0 - 10.0}\\\\d_i = \frac{50}{-5}\\\\d_i = -10.0 cm[/tex]

Answer: 11 Km

Explanation: You walk 0.5 to the friends and 0.5 back. This adds up to 1. Then you drive 10 Km to the mall. When you add 1 and 10 you get 11! Hope this helps!

5,758.5 miles or thr moon is a quarter of the diameter of the earth

The Earth's diameter is 5,758.5 miles larger than the diameter of the moon.

The diameter of the Earth is approximately 7,917.5 miles, while the diameter of the moon is about 2,159 miles. Therefore, we can determine how much larger the Earth is in diameter than the moon by subtracting the diameter of the moon from the Earth's diameter.

So, 7,917.5 miles (diameter of Earth) - 2,159 miles (moon’s diameter) = 5,758.5 miles.

Therefore, the Earth's diameter is 5,758.5 miles larger than the diameter of the moon.

https://brainly.com/question/32274310

#SPJ12