Answer:
Grosch
Explanation:
Grosch 's law is the mathematical formular that belief that large and powerful computers will be more costly than the smaller one because the functions and performance of the large and powerful computers cannot be compared with the smaller ones. He believes that the more costly a computer is the high the performance will be which means that low cost computer are not up to standard of a high cost computer in the market.
Use the fundamental counting principle to solve the problem. How many different codes of 4 digits are possible if the first digit must be 3, 4, or 5 and if the code may not end in 0?
Answer and Explanation:
Given,
4 digits and 10 digits.
Firstly, we have to find that when it repeats the digit then
First position code would be filled in by Three methods that is 3, 4, or 5.Second position code would be filled in by Ten methods.Third position code would also be filled in by Ten methods.Fourth position code would be filled in by 9 way but 0 is rejected. So, the total numbers of methods in the following case is [tex]3\times10\times10\times 9=2700[/tex].Then, we have to find that when it not repeats the digit then
First position code would be filled in by Three methods that is 3, 4, or 5.Second position code would be filled in by Nine methods in which one is reserved earlier.Third position code would be filled in by Eight methods in which two are reserved earlier.Fourth position code would be filled in by Six methods in which three are reserved earlier.So, the total numbers of methods in the following case is [tex]3\times9\times8\times6=1296[/tex]The fundamental counting principle can be used to determine the number of different codes of 4 digits that are possible, given certain conditions. In this case, there are 3 choices for the first digit, 10 choices for the remaining three digits (excluding 0 for the last digit), resulting in a total of 2,700 possible codes.
Explanation:The problem asks for the number of different codes of 4 digits that are possible if the first digit must be 3, 4, or 5, and if the code may not end in 0.
Using the fundamental counting principle, we consider each digit of the code separately. For the first digit, we have 3 choices (3, 4, or 5). For the remaining three digits, we have 10 choices each, as any digit from 0 to 9 can be chosen. However, since the code may not end in 0, we have 9 choices for the last digit.
Applying the multiplication principle, we multiply the number of choices for each digit: 3 choices for the first digit, 10 choices for the second, third, and fourth digits, and 9 choices for the last digit. Therefore, the total number of different codes is 3 x 10 x 10 x 9 = 2,700.
Derek found that the CPU was running several processes. While Derek was looking at Task Manager, the computer crashed. Derek restarted the computer and noticed a long load time for Windows. Derek checked Task Manager and saw several processes that he did not recognize. What should Derek perform next on the client’s computer?
Answer: d. Run a virus scan
Explanation: Running a virus scan will reveal if the trojan virus or any other malware has been launched and the clearing the virus when detected. These will make the computer to start working well again. The unexplainable processes that started when the computer was rebooted can be viruses.
Answer:
Scan the system for malware.
Explanation:
The computer system is an information technology system that holds information received by the user in the network and also created by the user for official purposes.
Malwares like virus, worm, trojan horse, rootkit etc are used by attackers to weaken the security of computer systems in a network and even the network security policies. Antivirus softwares are used to detect and remove malwares from system. It must be updated regularly alongside the computer's operating system, for malware signature update.
Your macOS installation is corrupted and you want to boot from an external Thunderbolt hard drive to repair the installation. Which key(s) do you hold down at startup to boot from the external hard drive?
Answer:
The Alternate (Alt) key
Explanation:
Press down the Option (Alt) key, soon after turning on the mac.
To boot from an external Thunderbolt hard drive on macOS, hold down the Option key immediately after restarting your computer until the Startup Manager appears. Then, select the external drive to boot from it.
To boot from an external Thunderbolt hard drive on a macOS system, you need to restart your computer and immediately hold down the Option key. Continue to hold this key until the Startup Manager appears. Here, you will be able to select your external hard drive as the boot device. Ensure that your external drive is a bootable device with a macOS installer or a viable system backup. Using a Thunderbolt connection is advantageous for its speed and reliability, and booting from an SSD (Solid State Drive) would further enhance this process due to the speed and resilience it offers compared to traditional hard drives.
In the context of the CIA triangle, confidentiality means that computers and networks are operating and authorized users can access the information they need. True
Answer:
False is the correct answer for the above question.
Explanation:
The CIA triangle is a concept of cybersecurity which tells the rules and fact for the Confidentiality, integrity, and availability to secure the information from the access of a wrong user.The confidentiality rules said that the information is accessed by the right user only. This is also said by the above question statement which is correct.But the above question statement also wants to say that confidentiality means that the networks and computers are operated by any person which is not correct. Hence false is the correct answer to the above question.You’re trying to cast a video presentation from your tablet to a projector for a training session with some new hires. Although you tested it successfully yesterday, today the connection is not cooperating. You’ve closed apps you’re not using, and you’ve checked that the projector and the tablet are working otherwise. Of the following troubleshooting steps, which should you try first? Second?
1. Restart the projector
2. Restart the tablet
3. Reinstall the presentation app.
4. Verify that you have Internet access on the tablet.
Answer:
2. Restart the tablet
Explanation:
Based on the information provided within the question it can be said that of the following troubleshooting steps you should first try to Restart the tablet. Many times a background process gets stuck and is preventing the connection from establishing. If this does not work then the next step would be to restart the projector, and lastly Verify that you have Internet access on the tablet.
Final answer:
First, verify Internet access on the tablet for casting the presentation. If connectivity is fine, then restart the tablet to solve potential glitches. Reinstalling the app is the last step after attempting simpler solutions.
Explanation:
When faced with technical difficulties while trying to cast a presentation from a tablet to a projector, it's essential to approach the situation methodically to identify and solve the issue. The first step to troubleshooting is to verify that you have Internet access on the tablet, as some presentations may require an online connection, especially if using web-based software like Prezi. If the Internet connection is stable, then the next step is to restart the tablet. This action can resolve many temporary glitches that may prevent the device from communicating correctly with the projector.
If these steps do not rectify the issue, proceed by restarting the projector, which may reinitialize the connection between the devices. Reinstalling the presentation app should be the last resort, as it is more time-consuming and typically unnecessary if the app was working the day before.
Ria has modified the hard disk that hosts the operating system by using the fdisk command. The fdisk command indicates that the new partition information must be manually reloaded. Which of the following should she do next? (Choose two. Either answer is
Answer:
a and d
Explanation:
A. Run the parted command
D. Reboot the system
These two actions will make it easier to manually reload the fdisk
digital video recorders (DVRs) in an inventory are known to be defective. What is the probability you randomly select an item that is not defective?
Answer:
76%
Explanation:
Based on the information provided within the question it can be said that in this scenario the probability you randomly select an item that is not defective would be 76%. This can be calculated in the following way:
50-12=38 (Number of recorders in working condition)
(38)/(50)=0.76
The probability is: 0.76
Now we times this decimal by 100 to get the percent.
0.76 * 100 = 76%
The following pseudocode is an example of ____.do stepAdo stepBif conditionC is true thendo stepDelsedo stepEendifwhile conditionF is truedo stepGendwhilea. nestingb. stackingc. posttestd. pretest
Answer:
Option d pretest
Explanation:
Given the pseudocode:
do stepAdo stepBif conditionC is true then do stepDelsedo stepEend ifwhile conditionF is truedo stepGend whileThe pseudocode above shows that there is a pretest before some codes are executed. For example, line 3 check if condition is true then only execute stepD otherwise execute stepE. Line 8 check if conditionF is true then repeatedly execute stepG. These are examples of pretest a condition will must be met (pretest passed) before a block of codes can be executed. This pretest can be seen in if-else statements and also the while condition.
All of the following statements concerning project portfolios are true EXCEPT: a. The projects in a portfolio are managed as a group to achieve strategic business objectives. b. Portfolios cannot include operations and programs. c. Portfolios usually include a mix of some high-risk, high-reward projects and some low-risk projects. d. Each project in the portfolio should have a direct impact on the organization.
Answer:
Option B is correct
Explanation:
Portfolios should not involve operations as well as programs because it is a concept which applies to that of the collection of projects of that same enterprise as well as the method through which they are identified, handled , purposefully chosen that achieve certain operational objectives of the company.
So, the following are the reason that describe the answer is correct according to the scenario.
Despite the rise of messaging apps and other forms of social media, these efforts are focused on consumer efforts, with corporations yet to find a viable way to leverage these services in an organizational setting.1. True2. False
Answer:
False
Explanation:
In our current market, we can find some messaging apps and social media designed for corporation organization setting. One example of messaging apps widely used in corporate world is Slack. The Slack enable user to set up different communication channel with their colleagues and flexibly set their working status.
FB also releases a corporate version of social media which is Workplace. The main attracting point is the contents are ad-free and you can expect to see company update or department news from the nesfeed.
When sketching out your Web site you create a clear and straightforward site map that divides the Web site content into a logical set of topics and subtopics (pages and subpages). Which principle of Web design are you considering when you organize the user interface into a form that is clearly understandable for the user?
Answer:
Structure.
Explanation:
While drawing the user's site, the simple, as well as concise sitemaps, is created which separates the scope of that site into such a coherent collection for topics & sub-topics.
So, the Structure concept in website development is regarded while designing a user interface in such a manner which is easily recognizable to the customer.
A metacharacter is a character that has a special meaning assigned to it and is recognized as part of a scripting or programming language. Escaping metacharacters is a programmatic tactic to treat all characters as basic ASCII rather than as something with special meaning or purpose.a.True.b. False.
Answer:
The answer is "Option a"
Explanation:
Meta-character is a unique character, which is used in the system or information area, that provides information about the other characters. This type of character is used in both command-line and programming.
It has a particular meaning and should be prevented for reasons except for its particular importance. It attempts in the algorithmic technique to view all character as a fundamental ASCII instead of a specific purpose.Explain what a lookup table is (assembly). Write pseudo code
Answer: Lookup table
In computer science, a lookup table is an array that replaces runtime computation with a simpler array indexing operation. The savings in terms of processing time can be significant, since retrieving a value from memory is often faster than undergoing an "expensive" computation or input/output operation.[1] The tables may be precalculated and stored in static program storage, calculated (or "pre-fetched") as part of a program's initialization phase (memoization), or even stored in hardware in application-specific platforms. Lookup tables are also used extensively to validate input values by matching against a list of valid (or invalid) items in an array and, in some programming languages, may include pointer functions (or offsets to labels) to process the matching input. FPGAs also make extensive use of reconfigurable, hardware-implemented, lookup tables to provide programmable hardware functionality.
You are managing an FTP server installed in Ubuntu Server. The server has created a very large log file, vsftpd.log. Which command is appropriate to search the log file for activity of the user charlie?
Answer:
sudo grep "charlie" /var/log/vsftpd.log
Explanation:
Whenever the user becomes running and configured the FTP server within the following Server. That network generated a quite wide logging file, called vsftpd.log. Therefore the sudo grep "charlie" /var / log / vsftpd.log commands seems to be suitable towards searching the log document regarding user charlie operation.
So, the following command is correct according to the given statement.
______is a multimodal application software platform. the centrealized and shared database system ties the entire organization together, allowing information to be entered once and made available to all users.
Answer:
Enterprise Resource Planning (ERP) system
Explanation:
The ERP system is an integrated system that mediate an organization processes that include collecting, managing, interpreting business data. The data storage is centralized and the entire organization can share the same business data. The data sharing is usually achieved through a continuously updated view of business data backed by a centralized database management system. This facilitate the information flow between different departments in an organization.
he "biggest cyber attack in history" could be prosecuted under which statute? a. CAN-SPAM b. Counterfeit Access Device and Computer Fraud Act c. Economic Espionage Act d. none of the above
Answer:
a. CAN-SPAM
Explanation:
CAN-SPAN is a law created in 2003 signed into law by President George W. Bush on December 16, this law was created for the Assault of Non-Solicited Marketing, and other situations, the standard was created to control the email and like the name the SPAM, this law was sponsored in congress by two senators Conrad Burns and Ron Wyden.
What type of IPv6 address should you use when you have multiple routers on a subnet and want hosts to use the nearest router for packets that should be delivered to remote networks?
Answer:
anycast
Explanation:
Anycast -
It refers to as the routing methodology and the networking address where only one destination address has more than two pathway for the end destination , is referred to as an anycast .
In this case , the router has the capability to select the pathway to reach the destination , depending on the latency measurement , cost , distance and hops .
Hence , from the given information of the question ,
The correct answer is anycast .
What is the faster way for browsers to obtain the revocation status of a digital certificate attached to a Web site?
Answer:
The fastest way to obtain the revocation status of digital certificate of the website is by using Online certificate Status Protocol (OSCP).
Explanation:
Online certificate status protocol is the protocol that help user to check and verify the digital certificate revocation status. This protocol is linked with the digital certificate issuance authority. Whenever someone want to verify the status of the digital certificate that is attached to access the website. The website administrator can send the request to OSCP handler to ensure the status of the certificate. The OSCP handler is connected through certificate issuance authority, send the detail to verify the status. After verifying the status, OSCP handler respond as certificate is valid or revoked to the concerned user.
Henry is having a problem with the electrical system on his current laptop. The battery for the laptop will not charge. Henry took the AC adapter and battery from another laptop that is known to work, and put them in his current laptop, but still the battery will not charge. What possible actions can Henry take to make his laptop usable? (Select all that apply.)
Answer:
The following are the suitable answers.
He will replace the system board of the laptop. He can buy a brand new laptop. He can only use the laptop while the AC adapter is attached to the battery.Explanation:
On his new system, Henry is experiencing an issue with their power system. The laptop should not charge. He picked up his adapter as well as battery from any other recognized laptop and insert that in his existing laptop, however, it might not start charging anything.
So, he follows some possible steps for his laptop that is:
Firstly, he will replace his system's board. Otherwise, He will buy a brand new laptop. Or, he will only use the laptop while the charger is attached to the battery.Which search engine optimization technique involves sending data describing your web site to the search engines and then paying a fee to ensure that your pages are part of the site’s engine index?
Answer:
Search feeds.
Explanation:
Search feeds seem to be the search engine optimization strategy includes transmitting information to those of the search engines that explaining the user's website and afterward charging the fee to assure that is pages would be included in the site engine listing.
So, the following answer is correct according to the given scenario.
Currently, the users in your company are required to use their IP addresses when connecting to other hosts. Since IP addresses are difficult to remember, you want to implement a protocol on your network that allows computers to automatically find another host's IP address using a logical name. True or false?
Answer:
False
Explanation:
Using subnet mask will be helpful, what the subnet mask does is moving the IP address boundary bettween the part that represents a network and the part that represents a host, thus, instructing the operating system which IP addresses are on the local subnet. Then the operating will communicate directly with the other host without using the router. Once this is achieved, memorizing the IP addresses is needless.
The Domain Name System (DNS) is the protocol that allows computers to use logical names instead of numerical IP addresses to find and connect to other hosts on the Internet. It is essential for the usability of the web, translating names to IP addresses.
Explanation:The protocol you want to implement to allow computers to automatically find another host's IP address using a logical name is the Domain Name System (DNS). This system translates more memorizable domain names to the numerical IP addresses needed for locating and identifying computer services and devices with the underlying network protocols. DNS is an essential component of the functionality of the Internet, providing a way to match names (a website you're seeking) to numbers (the address for the website). Anything connected to the Internet - laptops, tablets, mobile phones, websites - has an Internet Protocol (IP) address made up of numbers. Your request to connect to a site is sent to the DNS server, and the DNS server responds with the corresponding IP address. Thus, users don't need to memorize IP addresses; they simply remember the domain name, which is then resolved into an IP address by the DNS server.
The computer system provides an internal clock that sends an interrupt periodically to the CPU signaling that it’s time to start processing another program or thread. The time between interrupt pulses is known as a:_______.
Answer:
Quantum
Explanation:
A quantum is the time between interrupt pulses, and represents the time each program will have allocated to it to run. a quantum specifies the duration of time an interrupt delays for, before sending an extra pulse to the CPU. This is to properly coordinate the functions of the input and output devices of the computer better.
Quantum times are not usually fixed. they can be 1 millisecond or up to 10 milliseconds depending on the tasks that need to be performed
Which audio editing effect uses the option ""Get Profile"" to execute its function?
Answer: The audio editing effect that uses the option "Get profile" is used in removing background noises in an audio recording
Explanation:
"Get profile" or "get noise profile" as the case may be; depending on the software used, can be used to remove background noises when editing audios. This helps in making audio recordings noise free. The navigation processes are attached.
3. A vulnerability is: a. A hacker searching for open ports b. A known attack method c. An incorrectly implemented policy d. All of the above e. None of the above
Answer:
A
Explanation:
A hacker searching for open ports denotes vulnerability of computer (to hacking).
Cheers
A user contacted the help desk to report that the laser printer in his department is wrinkling the paper when printed. The user checked the paper in the supply tray, and it is smooth and unwrinkled.
Which of the following is the most likely reason for the wrinkled paper? (Select TWO.)
A. The paper does not meet the requirements for the printer.
B. The user is selecting the wrong driver for the printer.
C. The paper is creased before it is installed in the printer.
D. The pages being printed are using too much toner.
E. The paper is damp when run through the printer.
F. The printer does not have enough free memory.
Final answer:
The most likely reasons for wrinkled paper in a laser printer are E. damp paper and D. excessive toner usage.
Explanation:
The service centre received a complaint from a user who claimed that every page was damaged when printing using their office's laser printer. Despite being glossy and wrinkle-free, the user thoroughly examined the sheets inside the distribution tray. The most likely reasons for the wrinkled paper in the laser printer are:
The paper is damp when run through the printer: Moisture on the paper can cause it to become wrinkled when going through the heated pressure rollers.The pages being printed are using too much toner: If the toner is applied too heavily, it can cause the paper to wrinkle.It is important to ensure that the paper is dry and that the correct amount of toner is being applied to prevent wrinkling.
Dell Computer uses recycled and recyclable materials in its product and packaging design in an effort to minimize damage to the environment which will help future generations meet their own needs. Dell's efforts are an example of _____.
Answer:
sustainability
Explanation:
Sustainability -
It refers to the method to meet the needs of the present generation without hampering the needs of the future generation as well , is referred to as sustainability .
The process of sustainability require to follow the concept of reuse and recycle to be safe for the environment .
The process is very safe for the planet , as it environmental friendly .
Hence , from the given scenario of the question ,
The correct answer is sustainability .
A short-circuit evaluation is where each part of an expression is evaluated only as far as necessary to determine whether the entire expression is:_____.A. True B. false
Answer:
The correct answer is True.
Explanation:
Short circuit evaluation is the semantics of some Boolean operators in some programming languages in which the second argument is executed or only evaluated if the first argument is not sufficient to determine the value of the expression: when the first argument of the AND function evaluate to false, the global value must be false; and when the first argument of the OR function evaluates to true, the global value must be true. In some programming languages (Lisp, Perl, Haskell, due to lazy evaluation), the usual Boolean operators are short-circuited. In others (Ada, Java), both short-circuit and standard Boolean operators are available. For some Boolean operations, such as exclusive or (XOR), a short circuit is not possible, because both operands are always necessary to determine the result.
Your desktop computer has DVI and HDMI video ports. If a DVI monitor does not work on your system and yet you know the monitor is good, what is the best solution?
Answer:
The best possible and cost effective solution is that, Use DVI to HDMI converter to use the DVI monitor.
Explanation:
In above mentioned case, as the DVI port is not working, but DVI monitor is working properly. There are few solutions to use this monitor with the system. For example, a new monitor can be purchased that support HDMI port or replace the old DVI port or card with newer one. Both of the methods are too much costly and time consuming.
The best possible solution is just buy a DVI to HDMI converter and use it with DVI monitor and the system. It is most cost effective and time saving solution.
Answer:
Use a DVI to HDMI adapter to use the current DVI monitor and cable
Explanation:
DVI connections are becoming obsolete by the day. DVI and HDMI cables are both able to stream HD videos and are the same in various ways. In this case, however, it is most likely that the DVI ports on the monitors are somehow not compatible. The solution to this is to use a DVI to HDMI adapter or cable. DVI to HDMI adapter has DVI pins on one end and HDMI port on the other end. You connect using this cable and you will have picture and sound.
You’re trying to cast a video presentation from your tablet to a projector for a training session with some new hires. Although you tested it successfully yesterday, today the connection is not cooperating. You’ve closed apps you’re not using, and you’ve checked that the projector and the tablet are working otherwise. Of the following troubleshooting steps, which should you try first? Second?
1. Restart the projector
2. Restart the tablet
3. Reinstall the presentation app.
4. Verify that you have Internet access on the tablet.
Answer:
Troubleshooting steps to take:
Restart the tabletRestart the projectorExplanation:
When such problems occur, the basic and quick troubleshooting step is to restart the device or devices involved.
Restart the tablet: This could come in handy regarding this problem. The inability to connect to the projector could be due to the inability of a specific service or driver needed for the projector. Restarting the tablet will load up the drivers and services again to enable smooth connections. When a restart is done, bugs are fixed, internet connection is rectified, memory leaks are stopped, performance is aided, the RAM (Random Access Memory) is flushed or cleaned. This should resolve the problem, however, if not, try number 2.Restart the projector: There are driver software on projectors, and due to one system failure or another, these software may fail to load. This could affect its connection to another device. As done in (1), restarting the projector will fix those bugs and load up, which should solve the connection issue.You recently upgraded your computer and added an extra 512 MB of RAM. Consequently, you want to increase your swap space by adding a new swap area. The second hard disk has an unused partition (/dev/sdb2) that you want to format for the swap area. In this lab, your task is to: Create a swap partition on /dev/sdb2. Activate the swap partition.
Answer:
Following are the answers of the question.
mkswap /dev/sdb2swapon /dev/sdb2Explanation:
Firstly we have to generate the swap partition on the following directory then we have the following command for the swap partition that is :
mkswap /dev/sdb2
Then, we have to activate the following swap partition after generating the swap partition by using the following commands that is :
swapon /dev/sdb2
So, the following commands is correct for creating or activating the swap partition according to the following scenario.