Reflected light from a thin film of oil gives constructive interference for light with a wavelength inside the film of λfilm. By how much would the film thickness need to be increased to give destructive interference?
A. 2λfilm   
B. λfilm   
C. λfilm/2   
D. λfilm/4

A) Force of the wall on the ladder: 186.3 N

B) Normal force of the ground on the ladder: 725.2 N

C) Minimum value of the coefficient of friction: 0.257

D) Minimum absolute value of the coefficient of friction: 0.332

Explanation:

a)

The free-body diagram of the problem is in attachment (please rotate the picture 90 degrees clockwise). We have the following forces:

[tex]W=mg[/tex]: weight of the ladder, with m = 20 kg (mass) and [tex]g=9.8 m/s^2[/tex] (acceleration of gravity)

[tex]W_M=Mg[/tex]: weight of the person, with M = 54 kg (mass)

[tex]N_1[/tex]: normal reaction exerted by the wall on the ladder

[tex]N_2[/tex]: normal reaction exerted by the floor on the ladder

[tex]F_f = \mu N_2[/tex]: force of friction between the floor and the ladder, with [tex]\mu[/tex] (coefficient of friction)

Also we have:

L = 4.1 m (length of the ladder)

d = 3.0 m (distance of the man from point A)

Taking the equilibrium of moments about point A:

[tex]W\frac{L}{2}sin 21^{\circ}+W_M dsin 21^{\circ} = N_1 Lsin 69^{\circ}[/tex]

where

[tex]Wsin 21^{\circ}[/tex] is the component of the weight of the ladder perpendicular to the ladder

[tex]W_M sin 21^{\circ}[/tex] is the component of the weight of the man perpendicular to the ladder

[tex]N_1 sin 69^{\circ}[/tex] is the component of the normal  force perpendicular to the ladder

And solving for [tex]N_1[/tex], we find the force exerted by the wall on the ladder:

[tex]N_1 = \frac{W}{2}\frac{sin 21^{\circ}}{sin 69^{\circ}}+W_M \frac{d}{L}\frac{sin 21^{\circ}}{sin 69^{\circ}}=\frac{mg}{2}\frac{sin 21^{\circ}}{sin 69^{\circ}}+Mg\frac{d}{L}\frac{sin 21^{\circ}}{sin 69^{\circ}}=\frac{(20)(9.8)}{2}\frac{sin 21^{\circ}}{sin 69^{\circ}}+(54)(9.8)\frac{3.0}{4.1}\frac{sin 21^{\circ}}{sin 69^{\circ}}=186.3 N[/tex]

B)

Here we want to find the magnitude of the normal force of the ground on the ladder, therefore the magnitude of [tex]N_2[/tex].

We can do it by writing the equation of equilibrium of the forces along the vertical direction: in fact, since the ladder is in equilibrium the sum of all the forces acting in the vertical direction must be zero.

Therefore, we have:

[tex]\sum F_y = 0\\N_2 - W - W_M =0[/tex]

And substituting and solving for N2, we find:

[tex]N_2 = W+W_M = mg+Mg=(20)(9.8)+(54)(9.8)=725.2 N[/tex]

C)

Here we have to find the minimum value of the coefficient of friction so that the ladder does not slip.

The ladder does not slip if there is equilibrium in the horizontal direction also: that means, if the sum of the forces acting in the horizontal direction is zero.

Therefore, we can write:

[tex]\sum F_x = 0\\F_f - N_1 = 0[/tex]

And re-writing the equation,

[tex]\mu N_2 -N_1 = 0\\\mu = \frac{N_1}{N_2}=\frac{186.3}{725.2}=0.257[/tex]

So, the minimum value of the coefficient of friction is 0.257.

D)

Here we want to find the minimum coefficient of friction so the ladder does not slip for any location of the person on the ladder.

From part C), we saw that the coefficient of friction can be written as

[tex]\mu = \frac{N_1}{N_2}[/tex]

This ratio is maximum when N1 is maximum. From part A), we see that the expression for N1 was

[tex]N_1 = \frac{W}{2}\frac{sin 21^{\circ}}{sin 69^{\circ}}+W_M \frac{d}{L}\frac{sin 21^{\circ}}{sin 69^{\circ}}[/tex]

We see that this quantity is maximum when d is maximum, so when

d = L

Which corresponds to the case in which the man stands at point B, causing the maximum torque about point A. In this case, the value of N1 is:

[tex]N_1 = \frac{W}{2}\frac{sin 21^{\circ}}{sin 69^{\circ}}+W_M \frac{L}{L}\frac{sin 21^{\circ}}{sin 69^{\circ}}=\frac{sin 21^{\circ}}{sin 69^{\circ}}(\frac{W}{2}+W_M)[/tex]

And substituting, we get

[tex]N_1=\frac{sin 21^{\circ}}{sin 69^{\circ}}(\frac{(20)(9.8)}{2}+(54)(9.8))=240.8 N[/tex]

And therefore, the minimum coefficient of friction in order for the ladder not to slip is

[tex]\mu=\frac{N_1}{N_2}=\frac{240.8}{725.2}=0.332[/tex]

Learn more about torques and equilibrium:

brainly.com/question/5352966

#LearnwithBrainly

Incomplete question as many data is missing.I have assumed value of charge and electric field.The complete question is here

A charge of 28 nC is placed in a uniform electric field that is directed vertically upward and that has a magnitude of 5.00×10⁴ V/m.

What work is done by the electric force when the charge moves a distance of 2.70 m at an angle of 45.0 degrees  downward from the horizontal?

Answer:

[tex]W_{work}=2.67*10^{-3}J[/tex]

Explanation:

Given data

Charge q=28 nC

Electric field E=5.00×10⁴ V/m.

Distance d=2.70 m

Angle α=45°

To find

Work done by electric force

Solution

[tex]W_{work}=F_{force}*D_{distance}Cos\alpha \\where\\F_{force}=q_{charge}*E_{Electric-Field}\\So\\W_{work}=qE*D*Cos\alpha \\W_{work}=(28*10^{-9}C )(5.00*10^{4}V/m )(2.70m)Cos(45)\\W_{work}=2.67*10^{-3}J[/tex]

Answer:

a.Insulators can be used to increase the amount of current that can flow through a resistor without increasing its temperature.

Explanation:

A conductor has low resistance, while an insulator has much higher resistance. Devices called resistors control amounts of resistance into an electrical circuits. Electric charges inside an insulator are bound to the individual atoms or molecules, not being able to move inside the material.

When you turn up the resistance, the electric current flowing through the circuit is reduced

Ohm's law:

V = I * R

R = V/I

An Ohmic conductor would have a linear relationship between the current and the voltage. With non-Ohmic conductors, the relationship is not linear. Most metals are good conductors example silver, copper etc.

Answer:

option C

Explanation:

Given,

Change on the capacitor = Q

Separation is doubled

Energy stored in the capacitor,E = ?

we know,

[tex]E = \dfrac{Q^2}{2C}[/tex]

and [tex]C = \dfrac{\epsilon_0A}{d}[/tex]

now,

[tex]E = \dfrac{Q^2}{2\epsilon A}\ d[/tex].......(1)

where d is the separation between the two plates.

now, when the separation is doubled

[tex]E' = \dfrac{Q^2}{2\epsilon A}\ (2d)[/tex]

[tex]E' = 2(\dfrac{Q^2}{2\epsilon_0 A}\ d)[/tex]

From equation (1)

  E' = 2 E

Hence, the energy stored in the capacitor is doubled if the separation is increased.

The correct answer is option C.

Answer:

Frequency of the vibration due to crevice is 1500 Hz.

Explanation:

Frequency is defined as rate of vibration per second. Its S.I. unit is s⁻¹ or Hz.

According to the problem, we have to find number of crevice car makes in 1 second.

Speed of car, u = 30 m/s

Distance covered by car in 1 second, d = 30 m

For every 0.02 m, one crevice occurred by the tire of car.  

Number of crevice occurred in 1 second by the car =  [tex]\frac{30}{0.02}[/tex]

                                                                                    = 1500

Since, each crevice makes a single vibration. Thus, the frequency of these vibrations is 1500 Hz.

The frequency of the vibrations generated by the tire treads in this case, given that each crevice is 2.00 cm apart and the car moves at 30.0 m/s, is 1500 Hz.

In this scenario, it is important to understand that the frequency of the vibrations is determined by the speed of the tire and the tread pattern. Here, the crevice, which causes the vibration, occurs every 2.00 cm (or 0.02 m). This means for every meter the car moves, 0.02 m into 1 m gives a total of 50 vibrations. Therefore, at a speed of 30.0 m/s, we will have 50 vibrations/m multiplied by 30 m/s, giving a frequency of 1500 Hz or vibrations per second.

Frequency in this question refers to the number of times the vibration from the crevices occur in a unit of time (in this case, per second). This concept is crucial in understanding wave motions and vibration patterns, and is often applied in physics-related disciplines.

https://brainly.com/question/29798783

#SPJ11

Answer:

30 degrees

Explanation:

The boat to go straight across the river uptream will have to make angle of 30 degree with the resultant velocity vector of boat.

What is vector law of addition ?

Vector addition is governed by the triangle law which states that when two vectors are represented by two triangle sides with their order of magnitude and direction, the resultant vector's magnitude and direction will be represented by the third triangle side.

It is given that speed of boat in still water v₁ = 4 km/h

speed of current v₂ = 2 km/h

Let the relative speed of boat with respect to current be =  v km/h

and the angle made by v₁ with v be = θ

No find the angle θ with which the boat to go straight across the river uptream by triangle law of vector addition as shown below :

[tex]\begin{aligned}\theta &=\text{sin}^{-1}\left ( \frac{2}{4} \right )\\&= 30^{0}\end{aligned}[/tex]

Therefore, the boat to go straight across the river uptream will have to make angle of 30 degree with the resultant velocity vector of boat.

Learn more about "velocity" here:

https://brainly.com/question/7359669

#SPJ2

Answer:

Total weight of the hot tub and water is 5676.6 pounds-force

Explanation:

rho = 62.4lbm/ft^3 × 1ft^3/7.481gal = 8.34lbm/gal

Mass of water = rho × volume = 8.34lbm/gal × 600 gallons = 5004lbm = 5004×0.45359kg = 2269.8kg

Total mass of hot tub and water = 320kg + 2269.8kg = 2589.8kg

Local acceleration due to gravity = 32ft/s^2 = 32ft/s^2 × 1m/3.2808ft = 9.75m/s^2

Total weight of hot tub and water = 2589.8kg × 9.75m/s^2 = 25250.55N = 25250.55/4.4482 lbf = 5676.6 lbf

Answer:

0.044 V

Explanation:

E = Electric field = [tex]5.5\times 10^6\ V/m[/tex]

d = Thickness of membrane = 8 nm

When the electric field strength is multiplied by the membrane thickness we get the voltage

Voltage across a gap is given by

[tex]V=Ed\\\Rightarrow V=5.5\times 10^6\times 8\times 10^{-9}\\\Rightarrow V=0.044\ V[/tex]

The voltage across the membrane is 0.044 V

Final answer:

The voltage across an 8.00 nm-thick membrane with an electric field strength of 5.50 MV/m is calculated using the formula V = Ed, resulting in a voltage of 44.0 mV.

Explanation:

The voltage across a membrane can be determined by using the relationship between electric field strength (E), voltage (V), and the distance (d) the electric field spans. The electric field is uniform and the formula to use is V = Ed. In this case, the electric field (E) is given as 5.50 MV/m or 5.50 x 10⁶V/m, and the thickness of the membrane (d) is 8.00 nm or 8.00 x 10⁻⁹ m.

To find the voltage across the membrane, we simply multiply the electric field by the thickness of the membrane:

V = (5.50 x 10⁶ V/m) x (8.00 x 10⁻⁹ m)

Therefore:

V = 44 x 10⁻³ V

V = 44.0 mV

So, the voltage across an 8.00 nm-thick membrane with the given electric field strength is 44.0 mV.

Answer:

[tex]Q = T1 - T2 (KA)/L[/tex]

Explanation:

Where Q is the co-efficient of heat transfer.

T-1 is initial temperature of exchanger

T-2 is final temperature of sink where has to to be dissipated

k is the co-efficient of thermal conductivity

A is the total area of exchanger surface...

and L is the total length of exchanger...

Answer:

Q1. corect is B, Q2. it is A, Q3.  E and Q4. A  

Explanation:

Q1 For this exercise we can use Newton's second law where acceleration is centripetal.

              F = m a

              a = v² / r.

              G m M / r² = m v² / r

               G M / r = v²

The velocity has a constant magnitude whereby we can divide the length of the circular orbit (2π r) between the period

               G M / r = (2π r / T)²

                r³ = G M T2 / 4π²

Let's calculate

              T = 103 day (24 h / 1 day) (3600 s / 1h) = 8,899 10⁶ s

              r³ = 6.67 10⁻¹¹  1.99 10³⁰ (8,899 10⁶) 2 / 4π²

              r = ∛ (266.25 10³⁰)

              r = 6.4 10¹⁰  m

The distance matches the value in part B

Q2 Astronauts have measured the acceleration of gravity, so we can use the second law with a body on the planet's surface

            F = m g

            G m M_p / R_p² = m g

             G M_p / R_p² = g

              M_p = g R_p² / G

They indicate that the radius of the planet is half the radius of the Earth

              R_p = ½ R_earth

              R_p = ½ 6.37 10⁶

              R_p = 3.185 10⁶ m

Let's calculate

             M_p = 8.2 (3,185 10⁶)² / 6.67 10⁻¹¹

             M_p = 1.25 10²⁴ kg

The correct answer is A

Q3 We use Newton's second law again, with part Q1, where M is the mass of the planet and m is the mass of the moon

                r³ = G M T² / 4π²

               T = 63 days (24h / 1day) (3600s / 1h) = 5.443 10⁶ s

               r³ = 6.67 10⁻¹¹ 1.25 10²⁴ (5.443 10⁶)² / 4π²

               r = ∛ (62.56807 10²⁴)

               r = 3.97 10⁸ m

The correct answer is E

Q4 To calculate this part let's use the conservation of mechanical energy,

Starting point The surface of the moon

          Em₀ = K + U = ½ m v2 - G m M / r

Final point. Infinity with zero speed

           [tex]Em_{f}[/tex] = 0

              Em₀ = Em_{f}

              ½ m v² - G m M / R = 0

              v² = 2 G M / r

              M = v2 r / 2G

              r = 2 G M / v²

Since we don't know the radius of the moon, we will also use the equation in part 2

              M = g r² / G

               r = √ GM / g

Let's replace

              2G M / v² = √ G M / g

              4 G M / v⁴ = 1 / g

              M = v⁴ / (g 4G)

              M = 3000⁴ / (2.7  4 6.67 10-11)

              M = 1.12 10²³ kg

corract is  A

Answer:

I. The hollow sphere has the greater angular momentum.

Explanation:

Given that the mass and radius of hollow sphere and solid sphere are same. Let the mass and radius of two spheres be m and r respectively. The two spheres are rotating having same angular velocity ω .

Moment of inertia of solid sphere, I₁ = [tex]\frac{2}{5}\times{m}r^{2}[/tex]

Moment of inertia of hollow sphere, I₂ = [tex]\frac{2}{3}\times{m}r^{2}[/tex]

Since, I₁ and I₂ are not equal. Therefore, the statement iv is wrong.

The relation between angular momentum, moment of inertia and angular velocity is :

L = Iω

Let L₁ and L₂ be the angular momentum of solid sphere and hollow sphere respectively.

L₁ = I₁ω     and   L₂ = I₂ω

As ω is same for both spheres but I₂ is greater than I₁, hence L₂ is greater than L₁.

Therefore, statement I is correct that the hollow sphere has the greater angular momentum.

The angular momentum of the hollow sphere is greater than that of solid sphere.

The moment of inertia of solid sphere is given as follows;

[tex]I_{ss} = \frac{2}{5} mr^2 = 0.4mr^2[/tex]

The moment of inertia of hollow sphere is given as follows;

[tex]I_{hs} = \frac{2}{3} mr^2 = 0.67 mr^2[/tex]

The angular momentum of each sphere is calculated as follows;

[tex]L = I\omega \\\\L_{ss} = 0.4mr^2 \omega \\\\L_{hs} = 0.67 mr^2 \omega[/tex]

Thus, we can conclude that the angular momentum of the hollow sphere is greater than that of solid sphere.

Learn more about angular momentum of spheres: https://brainly.com/question/9252521

Answer:

Explanation:

Given

W amount of work is done on the system such that it acquires v velocity after operation(initial velocity)

According to work energy theorem work done by all the forces is equal to change in kinetic energy of object

[tex]W=\frac{1}{2}mv^2---1[/tex]

where m=mass of object

v=velocity of object

When the object is already have velocity v then the final speed is given by work energy theorem

[tex]W=\frac{1}{2}mv_f^2-\frac{1}{2}mv^2-----2[/tex]

From 1 and 2 we get

[tex]\frac{1}{2}mv^2=\frac{1}{2}mv_f^2-\frac{1}{2}mv^2[/tex]

[tex]2\times \frac{1}{2}mv^2=\frac{1}{2}mv_f^2[/tex]

[tex]v_f^2=2v^2[/tex]

[tex]v_f=\sqrt{2}v[/tex]                

Answer:

(a) [tex]I_{1}=3.2*10^{-3}W/m^{2}[/tex]

(b) [tex]\beta =95dB[/tex]

Explanation:

Given data

Distance r₁=50 m

Distance r₂=2 m

Intensity I₂=2.0 W/m²

To find

(a) The Sound Intensity I₁

(b) The Sound Intensity level β

Solution

For (a) the Sound Intensity I₁

[tex]\frac{I_{1} }{I_{2}}=\frac{(r_{2})^{2} }{(r_{1})^{2} }\\I_{1} =I_{2}(\frac{(r_{2})^{2} }{(r_{1})^{2} })\\I_{1}=(2.0W/m^{2} )(\frac{(2m)^{2} }{(50m)^{2} })\\I_{1}=3.2*10^{-3}W/m^{2}[/tex]

For (b) the Sound Intensity level β

The Sound Intensity level β is calculated as follow

[tex]\beta =(10dB)log_{10}(\frac{I}{I_{o} } )\\\beta =(10dB)log_{10}(\frac{3.2*10^{-3}W/m^{2} }{1.0*10^{-12} W/m^{2} } )\\\beta =95dB[/tex]

Answer:

1.2 cm

Explanation:

Thermal Expansion

It's the tendency that materials have to change its size and/or shape under changes of temperature. It can be in one (linear), two (surface) or three (volume) dimensions.

The formula to compute the expansion of a material under a change of temperature from [tex]T_o[/tex] to [tex]T_f[/tex] is given by.

[tex]\Delta L=L_o.\alpha .(T_f-T_o)[/tex]

Where Lo is the initial length and [tex]\alpha[/tex] is the linear temperature expansion coefficient, which value is specific for each material. The data provided in the problem is as follows:

[tex]L_o=30\ m,\ T_f-T_o=30^oC,\ \alpha=13\times 10^{-6}\ ^oC^{-1}[/tex]

Computing the expansion we have

[tex]\Delta L=30\times 13\times 10^{-6}(30)=0.0117=1.17\ cm[/tex]

The expansion gap should be approximately 1.2 cm

Answer:

Explanation:

Given

mass of vehicle [tex]m=1500\ kg[/tex]

Speed of vehicle [tex]u=50\ km/hr\approx 13.89\ m/s[/tex]

Kinetic Energy Possessed by mass

[tex]K_i=\frac{1}{2}mu^2[/tex]

[tex]K_i=\frac{1}{2}\times 1500\times (13.89)^2[/tex]

[tex]K_i=144.69\ kJ[/tex]

when vehicle is slowed down to speed of [tex]v=10\ km/hr\approx 2.78\ m/s[/tex]

Kinetic Energy at this speed

[tex]K_f=\frac{1}{2}mv^2[/tex]

[tex]K_f=\frac{1}{2}\times 1500\times (2.78)^2[/tex]

[tex]K_f=5.78\ kJ[/tex]

Energy Recovered [tex]=K_i-K_f[/tex]

Energy Recovered[tex]=144.69-5.78=138.9\ kJ[/tex]        

Answer:

T= 89.25 K

Explanation:

Given that

V= 590 mph

We know that

1 mph  = 0.44 m/s

That is why ,V= 263.75 m/s

We know that speed of the gas molecule is given as

[tex]V=\sqrt{\dfrac{3RT}{M}}[/tex]

R= 8.314 J/mol.k

M= 32 g/mol = 0.032 kg/mol

T=Temperature in Kelvin unit

[tex]V^2=\dfrac{3RT}{M}[/tex]

[tex]T=\dfrac{V^2\times M}{3R}[/tex]

[tex]T=\dfrac{263.76^2\times 0.032}{3\times 8.314}\ K[/tex]

T= 89.25 K

Therefore the average temperature ,T = 89.25 K

Answer:

temperature does the average speed of an oxygen molecule equal that of an airplane moving at 590 mph  = 89.24 K

Explanation:

Average speed of oxygen molecule is given by

[tex]v= \sqrt{\frac{3RT}{M} }[/tex]

[tex]590\times0.44704 = 263.75[/tex] m/s

R= 8.314 J/mol K = universal gas constant

M= molecular weight of oxygen = 32 g/mol =0.032 Kg/mol

now plugging these values to find T we get

[tex]263.75=\sqrt{\frac{3(8.314)(T)}{0.032}}[/tex]

solving the above equation we get

T= 89.24 K

Answer:

0.033 A

Explanation:

Current: This can be defined as the rate of flow of electric charge in a circuit.

The S.I unit of current is Ampere (A)

From Ohm's law.

V = IR ............................ Equation 1

Where V = Potential difference, I = current, R = resistance.

Making I the subject of the equation,

I = V/R................... Equation 2

Given: V = 52.3 V, R = 1570 Ω

Substitute into equation 2

I = 52.3/1570

I = 0.033 A.

Hence the current in the resistor = 0.033 A

Answer:

Yes it will slide down the ramp

Explanation:

Let m be the mass of the box and gravitational acceleration g = 9.81m/s2, we can calculate the gravity that affects the box

W = mg

When the box is at 35 degree incline, this gravity is split into 2 components, 1 parallel to the incline (Wsin35) and the other one perpendicular with the incline (Wcos35).

The one perpendicular with the incline has an equal and opposite normal force of Wcos35

This normal force would dictate the static friction force where coefficient = 0.5. So the static friction is 0.5mgcos35

The box would slide when the parallel component of gravity wins over static friction force

mgsin35 > 0.5mgcos35

Since mg is positive we can cancel them out on both sides

sin35 > 0.5cos35

0.57 > 0.5*0.82

0.57 > 0.41

This is true so we can conclude that the box slides down the ramp

Answer:

F=5618278.8 N

Explanation:

Given that

m = 970 kg

Initial speed ,u = 52 km/h

u = 14.44 m/s          ( 1 km/h = 0.277 m/s)

Distance d= 1.8 cm  = 0.018 m

The final speed ,v = 0 m/s

We know that

v² = u² + 2 a d

a=Acceleration

0² = 14.44² + 2 x a x 0.018

[tex]a=-\dfrac{14.44^2}{2\times 0.018}\ m/s^2[/tex]

a=5792.04 m/s²

We know that

Force = Mass x acceleration

F=  m a

F= - 5792.04 x 970 N

F= - 5618278.8 N

Therefore the magnitude of the force will be 5618278.8 N.

F=5618278.8 N

Answer:

Explanation:

Given

Electric Field Strength [tex]E=4.5\times 10^{3}\ V/m[/tex]

Potential Difference between Plates is given by [tex]V=12.5\ kV[/tex]

In conducting plates a Potential difference exist between two plate which accelerate the charge when put between the conducting plates

The potential difference is given by

[tex]\Delta V=Ed[/tex]

where E=Electric Field strength

d=distance between Plates

[tex]d=\frac{\Delta V}{E}[/tex]

[tex]d=\frac{12.5\times 10^3}{4.5\times 10^{3}}[/tex]

[tex]d=2.78\ m[/tex]

Answer:

Explanation:

initial speed, u = 19 m/s

(a) Let it rises upto height h.

Use third equation of motion

v² = u² - 2 gh

where, v is the final velocity and it is zero.

0 = 19 x 19 - 2 x 9.8 x h

h = 18.4 m

(c) Let the ball takes time t to reach to the maximum height.

use first equation of motion

v = u - gt

0 = 19 - 9.8 x t

t = 1.94 s

(c) The time taken by the ball to reach to the ground = 2 x time to reach to maximum height

T = 2 x t = 2 x 1.94 = 3.88 s

(d) When the ball reaches the ground, let the velocity is v.

Use third equation of motion

v² = u² - 2 gh

where, v is the final velocity

v² = 0 + 2 x 9.8 x 18.4

v = 19 m/s

(a) The ball reaches a height of approximately 18.68 meters. (b) It takes approximately 1.94 seconds to reach its highest point  (c) The time taken to hit the ground is 1.94 seconds. When the ball returns to the level from which it started, its velocity is -19.0 m/s.

(a) To find the height that the ball reaches, we can use the kinematic equation:
Δy = v2 / (2g)
where Δy is the change in height, v is the initial velocity, and g is the acceleration due to gravity. Plugging in the given values, we have:
Δy = (19.0 m/s)2 / (2 * 9.8 m/s2)
Calculating, we find that the ball rises to a height of approximately 18.68 meters.
(b) The time it takes for the ball to reach its highest point can be calculated using the equation:

t = v / g
where t is the time, v is the initial velocity, and g is the acceleration due to gravity. Substituting the given values, we get:
t = (19.0 m/s) / (9.8 m/s2)
Simplifying, we find that it takes approximately 1.94 seconds for the ball to reach its highest point.
(c) Since the time it takes for the ball to reach its highest point is the same as the time it takes for it to fall back down, the time it takes for the ball to hit the ground after reaching its highest point is also 1.94 seconds.
(d) When the ball returns to the level from which it started, its velocity is equal in magnitude but opposite in direction to its initial velocity. Therefore, the velocity when it returns is -19.0 m/s.

Learn more about Kinematics here:

https://brainly.com/question/35140938

#SPJ3

Answer:

Explanation:

Given

speed of Electron [tex]u=2\times 10^7\ m/s[/tex]

final speed of Electron [tex]v=4\times 10^7\ m/s[/tex]

distance traveled [tex]d=1.2\ cm[/tex]

using equation of motion

[tex]v^2-u^2=2as[/tex]

where v=Final velocity

u=initial velocity

a=acceleration

s=displacement

[tex](4\times 10^7)^2-(2\times 10^7)^2=2\times a\times 1.2\times 10^{-2}[/tex]

[tex]a=5\times 10^{16}\ m/s^2[/tex]

acceleration is given by [tex]a=\frac{qE}{m}[/tex]

where q=charge of electron

m=mass of electron

E=electric Field strength

[tex]5\times 10^{16}=\frac{1.6\times 10^{-19}\cdot E}{9.1\times 10^{-31}}[/tex]

[tex]E=248.3\ kN/C[/tex]                

Answer:

Power, [tex]P=3.93\times 10^{26}\ W[/tex]

Explanation:

Given that,

The distance from the earth to the sun is about, [tex]d=1.5\times 10^{11}\ m[/tex]

let us assume that the average intensity of solar radiation at the upper atmosphere of earth,. [tex]I=1390\ W/m^2[/tex]

We need to find the total power radiated by the sun. The intensity is defined as the total power divided by the area of a sphere of radius equal to the average distance between the earth and the sun. It is given by :

[tex]I=\dfrac{P}{4\pi r^2}[/tex]

P is total power

[tex]P=4\pi r^2\times I[/tex]

[tex]P=3.93\times 10^{26}\ W[/tex]

So, the total power radiated by the sun is [tex]P=3.93\times 10^{26}\ W[/tex]. Hence, this is the required solution.

Final answer:

The total power radiated by the Sun is calculated using the area of the Sun and the power radiated per square meter at its surface. The Sun's total power output is found to be 3.82×1026 W. This value is important for understanding the energy Earth receives from the Sun, known as the solar constant (1360 W/m²).

Explanation:

The distance from the Earth to the Sun is about 1.50×1011 meters. The total power radiated by the Sun can be determined by using the following physics principle: The Sun, behaving as a perfect black body with an emissivity of exactly 1, radiates power uniformly across its surface area. The power radiated per square meter on the Sun's surface is found to be 6.3×107 W/m². The sun's radius is approximately 7.00×108 meters. Using the formula Power = Area × Intensity, we calculate the Sun's total power output.

The area of a sphere is given by 4πR2, where R is the radius of the sphere. Therefore, the total power output of the Sun is 4πR2σT4, which calculates to 3.82×1026 W. This immense amount of power is what we refer to as the solar luminosity.

At the distance of the Earth, this power is spread over a spherical area with a radius equal to the Earth-Sun distance. We can find the power per square meter at this distance, known as the solar constant, which is approximately 1360 W/m².

Answer:

(a) 20.84 ft/s

(b) 11.24 ft

(c) -68160 N

Explanation:

Parameters given:

Mass of Bus, Mb = 12000 lb

Mass of car, Mc = 2800 lb

Initial speed of bus before collision, u(b) = 18 ft/s

Initial speed of car before collision, u(c) = 33 ft/s

Coefficient of friction, μk = 0.6

(a)Combined velocity after collision.

Since the bus and car are entangled and move together after the collision, they have the same velocity after collision.

Using the law of conservation of momentum, we have:

Mb*u(b) + Mc*u(c) = Mb*v(b) + Mc*v(c)

Where v(b) = velocity of the bus,L after collision,

v(c) = velocity of the car after collision.

Since v(b) = v(c) = v,

Mb*u(b) + Mc*u(c) = (Mb + Mc)*v

=> (12000 * 18) + (2800 * 33) = (12000 + 2800) * v

=> 308400 = 14800 * v

=> v = 20.84 ft/s

Combined velocity after collision is 20.84 ft/s

(b) The force acting on the bus and car after collision is given as:

F = m*a

Where F = force,

m = combined mass of bus and car,

a = acceleration of the bus and car after collision.

We know that the only force acting on the combined mass of the bus and car is the Frictional force, Fr and it is given as:

Fr = μk*m*g

Where g = acceleration due to gravity

Hence,

Fr = ma

=> - μk*m*g = m*a

The negative sign signifies that the fictional force is acting in the opposite direction to the lotion.

=> a = - μk*g

a = - 0.6 * 32.2

a = - 19.32 ft/s^2

Using one of the equations of linear motion, we can find the distance moved by the car and bus after collision:

v*v = u*u + 2*a*s

Where s = distance moved

The final velocity, v, of the car and bus is 0 because they come to rest and the initial velocity, u, is 20.84 ft/s, the velocity of the car and bus after collision.

Hence,

0 = (20.84*20.84) + (-2*19.32*s)

=> s = -434.3056/-38.64

s = 11.24 ft

(c) Impulsive force is the force that two bodies which are colliding exert on one another. It is given mathematically as

I. F. = (momentum change)/time

Momentum change of the bus is:

Momentum change = final momentum - initial momentum

Momentum change = Mb*v(b) - Mb*u(b)

Momentum change = (12000*20.84) - (12000*18)

Momentum change = 250080 - 216000

Momentum change = - 34080 kgft/s

=> I. F. = - 34080/0.5

I. F. = - 68160 N

The Impulsive force of the bus on the car is - 68160N

The negative sign means the force is acting opposite to the motion of the car.

Answer:

The right option is option E. None of the answer choices given are totally correct.

Explanation:

All insulators normally have an equal amount of positive and negative charges distributed on their surface.

The amber rod (an insulator) is called negative because after the coming together with fur (another insulator), the amber rod rubs off electrons from the fur onto itself and has an overall more negatively charged particles than positively charged particles on its surface.

The fur in turn becomes positive because it has more positive charges than negative on its surface.

So, the convention allows the now rubbed off amber rod to be called negative.

So, it is evident that none of the answer choices are totally correct, the right answer is more of a mix of some of the answer choices and more!

Hope this helps!!

Answer:

[tex] d = \frac{v^2_i}{2a}= \frac{(20m/s)^2}{2* 3.43 m/s^2}=58.309m [/tex]

Explanation:

For this case  we can use the second law of Newton given by:

[tex] \sum F = ma[/tex]

The friction force on this case is defined as :

[tex] F_f = \mu_k N = \mu_k mg [/tex]

Where N represent the normal force, [tex]\mu_k [/tex] the kinetic friction coeffient and a the acceleration.

For this case we can assume that the only force is the friction force and we have:

[tex] F_f = ma[/tex]

Replacing the friction force we got:

[tex] \mu_k mg = ma[/tex]

We can cancel the mass and we have:

[tex] a = \mu_k g = 0.35 *9.8 \frac{m}{s^2}= 3.43 \frac{m}{s^2}[/tex]

And now we can use the following kinematic formula in order to find the distance travelled:

[tex] v^2_f = v^2_i - 2ad[/tex]

Assuming the final velocity is 0 we can find the distance like this:

[tex] d = \frac{v^2_i}{2a}= \frac{(20m/s)^2}{2* 3.43 m/s^2}=58.309m [/tex]

The hockey puck will travel approximately 58.5 meters across the floor before it stops.

To solve this problem, we will use the concepts of kinetic energy and the work-energy theorem.

Initially, the hockey puck has a kinetic energy of KE1 = 0.5*m*v^2 = 0.5*0.3 kg*(20 m/s)^2 =60 J

As it travels across the floor, the friction does work on it until it stops. The work done by the friction force is W = μ*m*g*d, where: μ is the coefficient of kinetic friction (0.35), m is the mass (0.3 kg), g is the gravitational constant (9.8 m/s^2), and d is the distance traveled.

The work done by the friction is equal to the initial kinetic energy (work-energy theorem), so we can solve for d: 60 J = 0.35 * 0.3 kg * 9.8 m/s^2 * d. Simplifying this equation gives d = 60 J / (0.35 * 0.3 kg * 9.8 m/s^2) = 58.5 m

https://brainly.com/question/33783036

#SPJ3

The spring does 0.1 Joules of work when the object is released and travels back to its initial position.

We have,

The work done by the spring can be calculated using the formula for the potential energy stored in a spring:

Potential Energy (PE) = 0.5 * k * x²,

where k is the spring constant and x is the displacement from the equilibrium position.

Given:

Spring constant (k) = 20 N/m,

Displacement (x) = 0.10 m (10 cm).

Calculate the potential energy when the spring is stretched to 10 cm:

PE = 0.5 * k * x²

= 0.5 * 20 N/m * (0.10 m)²

= 0.5 * 20 * 0.01 J

= 0.1 J.

The spring stores 0.1 Joules of potential energy when stretched to 10 cm.

When the mass is released and returns to its initial position, this potential energy is converted back into kinetic energy as the mass accelerates.

Therefore,

The spring does 0.1 Joules of work when the object is released and travels back to its initial position.

Learn mroe about potential energy in a string here:

https://brainly.com/question/10574872

#SPJ12

Final answer:

The spring does 0.1 Joules of work when the mass travels back to its initial position.

Explanation:

To find the work done by a spring when an object is released and travels back to its initial position, we can use the formula:

Work = (1/2) * k * x^2

Where k is the spring constant and x is the displacement from the equilibrium position. In this case, the spring constant is 20 N/m and the displacement is 10 cm (which is 0.1 m). Plugging these values into the formula, we get:

Work = (1/2) * 20 N/m * (0.1 m)^2 = 0.1 J

So, the spring does 0.1 Joules of work when the mass travels back to its initial position.

Explanation:

Implicit techniques for the discovery of extra-solar planets are used by astronomers. Evidence from the radial velocity of a change in the rotation of the star indicates the presence of a planet. If, with reference to Earth, the inclination of the planet's orbit is viewed as an edge-on, the detection of light originating from the star throughout its planetary transit would then be a verification.

Answer:

No, the deviation in the path of asteroid is not by 22°

Explanation:

Given:

velocity of asteroid, [tex]v_a=21\ km.s^{-1}[/tex]

acceleration of the rocket, [tex]a=0.035\ km.s^{-2}[/tex]

time of acceleration, [tex]t=40\ s[/tex]

Now, the final velocity of the asteroid:

using the equation of motion,

[tex]v=u+a.t[/tex]

where:

[tex]v=[/tex] final velocity

[tex]u=[/tex] initial velocity in the direction

[tex]v=0+0.035\times 40[/tex]

[tex]v=1.4\ km.s^{-1}[/tex]

Now direction of the resultant velocity:

[tex]\tan\beta=\frac{v_a}{v}[/tex]

[tex]\tan\beta=\frac{21}{1.4}[/tex]

[tex]\beta=86.186^{\circ}[/tex]

So, the deviation in the asteroid:

[tex]\theta=90-\beta[/tex]

[tex]\theta=90-86.186[/tex]

[tex]\theta=3.814^{\circ}[/tex]

Answer:

C

Explanation:

Correct answer: C. Fly the approach to runway 26. The winds from the storm could suddenly gust up and you don’t want to be in a short final or even in the flare when a tailwind from a storm gusts up. No other traffic and calm winds currently means that you can land on any runway you want. Go for the safe bet and land on 26.

In this scenario, the pilot should fly a left hand approach to runway 08.

In this scenario, with a calm wind, the pilot should fly a left hand approach to runway 08.

Since the wind is calm, there is no need for the pilot to adjust the approach. Flying in a clockwise pattern to runway 08 is the normal procedure.

Choosing any other option would not be appropriate or necessary.

https://brainly.com/question/20298738

#SPJ3