Answer:
The Correct Answer is C
Fossil A is younger than the index fossil.
Explanation:
Fossil A is younger than the index fossil is correct statement. Hence option 3 is correct.
What are fossils?Fossils are defined as an animal or plant relic, impression, or trace that has survived in the Earth's crust over time. A living object, such an animal or plant, dies and is quickly buried by debris, like mud, sand, or volcanic ash, which results in the creation of fossils. Important evidence for evolution and the environmental adaptation of plants and animals can be found in fossils.
Index fossils are fossils that are common yet were only present for a brief time. By comparing a rock layer to other rock layers, index fossils enable scientists to determine the relative age of a rock layer. Organisms that are still alive today yet have undergone little alteration over millions of years are known as living fossils.
Thus, fossil A is younger than the index fossil is correct statement. Hence option 3 is correct.
To learn more about fossils, refer to the link below:
https://brainly.com/question/6867325
#SPJ2
4) How many grams are there in 7.40 moles of AgNO37
Answer:
1258 grams of AgN03
Explanation:
We calculate the weight of 1 mol of AgN03:
Weight 1 mol AgN03= Weight Ag + Weight N +( Weight 0)x3=108g+ 14g+16gx3=170 g/mol
1 mol----170 g AgN03
7,4mol---x= (7,4 mol x170 g AgN03)/1 mol=1258 g AgN03
A sample of water drops from an initial temperature of 67.5 C to a final temperature of 25.2 C. If -4425 J of heat were released from this sample of water, what is the mass of the sample?
Answer:
mass = 25.03 g
Explanation:
Given data:
Initial temperature = 67.5°C
Final temperature = 25.2°C
Heat released = -4425 j
Mass of water = ?
Solution:
Specific heat capacity:
It is the amount of heat required to raise the temperature of one gram of substance by one degree.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 25.2°C - 67.5°C
ΔT = -42.3°C
Specific heat of water = 4.18 j/g.°C
Q = m.c. ΔT
-4425 j = m × 4.18 j/g.°C × -42.3°C
-4425 j = m × -176.81 j/g
m = -4425 j / -176.81 j/g
m = 25.03 g
The mass of the sample of water is approximately 250 grams.
To find the mass of the water sample, we can use the formula for the heat released or absorbed by a substance undergoing a temperature change:
[tex]\[ q = m \cdot c \cdot \Delta T \][/tex]
where:
[tex]- \( q \)[/tex] is the heat released or absorbed (in joules),
[tex]- \( m \)[/tex] is the mass of the substance (in grams),
[tex]- \( c \)[/tex] is the specific heat capacity of the substance (in joules per gram per degree Celsius),
[tex]- \( \Delta T \)[/tex] is the change in temperature (in degrees Celsius).
For water, the specific heat capacity [tex]\( c \)[/tex] is approximately [tex]\( 4.184 \, \text{J/g}^\circ \text{C} \)[/tex].
Given:
[tex]- \( q = -4425 \, \text{J} \)[/tex] (the negative sign indicates heat is released),
[tex]- \( \Delta T = 67.5^\circ \text{C} - 25.2^\circ \text{C} = 42.3^\circ \text{C} \),[/tex]
[tex]- \( c = 4.184 \, \text{J/g}^\circ \text{C} \).[/tex]
We can rearrange the formula to solve for [tex]\( m \)[/tex]:
[tex]\[ m = \frac{q}{c \cdot \Delta T} \][/tex]
Now, plug in the values:
[tex]\[ m = \frac{-4425 \, \text{J}}{4.184 \, \text{J/g}^\circ \text{C} \cdot 42.3^\circ \text{C}} \] \[ m = \frac{-4425}{4.184 \times 42.3} \] \[ m \approx \frac{-4425}{177.3172} \] \[ m \approx -25 \][/tex]
Since mass cannot be negative, we take the absolute value of the result:
[tex]\[ m \approx 250 \, \text{g} \][/tex]
Therefore, the mass of the sample of water is approximately 250 grams.
a. Write a balanced chemical equation for this reaction below.
Fe(s) + H2O2(aq) produces FeO3(s) + H2O (l)
Answer:
Fe(s) + 3H2O2(aq) ................. FeO3(s) + 3H2O (l)
Explanation:
Fe(s) + H2O2(aq) ---------------- FeO3(s) + H2O (l)
To balance the equation put coefficient of 3 at back of H2O and H2O2
Fe(s) + 3H2O2(aq) ................. FeO3(s) + 3H2O (l)
To check, the number of atoms of each element on the left must be equal to that of the right.
Element Left. Right
Fe. 1 1
H. 3×2=6 2×3=6
O. 3×2 =6. 3+3 = 6
This shows that the equation is balanced
I hope this was helpful, please mark as brainliest
Room has a dimension of 10ft x 20 ft x 8 ft. What is the volume of the room in cubic yards if 1 yard = 3ft
Answer:
1600/27 cubic yards
Explanation:
Convert each of the dimensions into yards, getting 10/3, 20/3, and 8/3. Multiply them all to get 1600/27
A gas has a volume of 490. mL at a temperature of -35.0 degrees C. What volume would the gas occupy at 42.0 degrees Celsius? Please show work so I can understand it. Will Mark Brainlest for the best answer : )
Answer:
V₂ = 648.53 mL
Explanation:
Given data:
Initial volume of gas = 490. mL
Initial temperature = -35°C (-35 + 273 = 238 k)
Final temperature = 42°C = (42+273 = 315 k)
Final volume = ?
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ = 490 mL × 315 K / 238 k
V₂ = 154350 mL.K / 238 K
V₂ = 648.53 mL
What is the difference between Electron Geometry and Molecular Geometry?
Answer:
Electron Geometry describes arrangement is electron groups & Molecular Geometry describes the arrangement of atoms
Explanation:
The picture above better explains it, hopefully this helps :)
A boy makes a small snowball and then pushes it around in the snow to make it bigger. He pushes it at a constant speed as the snowball gets bigger. If the snowball doubles in mass, what will happen to the kinetic energy ( Motion energy) of the snowball?
Answer:
It will decrease
Explanation:
As the snowball gets bigger, the kinetic energy of the body begins to reduce appreciably.
The condition given in this problem is constant speed.
At constant speed, the snowball is not accelerating and there is no external force acting appreciably on the ball.
Now, we know that;
K.E = [tex]\frac{1}{2}[/tex] m v²
m is the mass of the ball
v is the velocity of the ball
In this scenario, the velocity of the ball is constant and not changing. But the mass of the ball begins to increase, eventually, the kinetic energy of the ball will reduce.
The increasing mass without an appreciable increase in velocity will bring the body to rest as a result of increase inertia of the body.
Find the molar mass of Strontium nitride, Sr3N2.
Final answer:
The molar mass of Strontium nitride (Sr3N2) is calculated by multiplying the molar masses of strontium and nitrogen by their respective number of atoms in the formula and adding the products together, resulting in 290.88 g/mol.
Explanation:
To find the molar mass of Strontium nitride (Sr3N2), you must first determine the molar masses of strontium (Sr) and nitrogen (N) from the periodic table. The molar mass of strontium is 87.62 g/mol. Since there are three strontium atoms in Sr3N2, you would multiply 87.62 g/mol by 3. The molar mass of nitrogen is 14.01 g/mol, and there are two nitrogen atoms in Sr3N2, so multiply 14.01 g/mol by 2.
Then you add the molar masses of strontium and nitrogen together:
3 x 87.62 g/mol for Sr = 262.86 g/mol2 x 14.01 g/mol for N = 28.02 g/mol
Finally, sum these values to find the molar mass of Sr3N2:
Molar mass of Sr3N2 = 262.86 g/mol + 28.02 g/mol = 290.88 g/mol.
The form of energy that is stored in large objects because of its position above the ground is ____________ _________ energy.
Answer:
gravitational potential
Explanation:
Fill in the blanksThe form of energy that is stored in large objects because of its position above the ground is gravitational potencial energy.
the blank is a structure in a cell that contains information that controls a cells function
Answer:
The nucleus
Explanation:
The nucleus controls the metabolic functions of the cell by producing mRNA which encodes for enzymes e.g. insulin. The nucleus controls the structure of the cell by transcribing DNA which encodes for structural proteins such as actin and keratin.
To what pressure must a gas be compressed in order to get into a 3.00 cubic foot tank
the entire weight of a gas that occupies 400.0 cu. ft. at standard pressure?
Answer:
101333.33mmHg
Explanation:
The following were obtained from the question:
P1 = at stp = 760mmHg
V1 = 400.0cu.ft
V2 = 3cu.ft
P2 =?
Using Boyle's law equation, we obtained:
P1V1 = P2V2
760 x 400 = P2 x 3
Divide both side by the 3
P2 = (760 x 400) /3
P2 = 101333.33mmHg
The gas must b compressed to a pressure of 101333.33mmHg
1. What is the mass of 25.0 L of neon at STP?
Answer: m= 22.2 g Ne
Explanation: First find the moles of Ne using Ideal Gas Law and derive for n. So from PV= nRT the mole is derived as n = PV /RT
n = PV / RT
= 1 atm ( 25 L ) / 0.0821 L.atm /
mole.K ( 273 K )
= 1.11 moles Ne
Convert it to mass using the molar mass of Neon
1.11 moles Ne x 20 g Ne / 1 mole Ne
= 22.2 g Ne
Final answer:
The mass of 25.0 L of neon at STP is approximately 22.43 grams, calculated by using the molar volume of a gas at STP and the molar mass of neon.
Explanation:
To calculate the mass of neon at standard temperature and pressure (STP), we can use the molar mass of neon and the ideal gas law. At STP, one mole of any ideal gas occupies 22.4 L. Since we are given the volume of neon gas as 25.0 L, we can calculate the number of moles (n) of neon first:
n = Volume / Molar Volume at STP
n = 25.0 L / 22.4 L mol⁻¹ = 1.116 mol
The molar mass of neon (Ne) is approximately 20.11 g mol⁻¹. We use the calculated moles to find the mass:
mass = n × molar mass
mass = 1.116 mol × 20.11 g mol⁻¹ = 22.43 g
So, the mass of 25.0 L of neon at STP is approximately 22.43 grams.
Plants grow in many different shapes and sizes. Much of their shape depends on an internal structure that is composed of carbon-containing molecules such as cellulose and lignin. Plants that have a strong internal structure can grow larger than other plants because their structure can support their size.
Plants obtain the majority of the carbon necessary for building these structural molecules from —
A) air
B) microorganisms
C) soil
D) water
Answer:
A. Air
Explanation:
Lignin which has a glucos link is a unique hydrocarbon comprising 8-20% of the cell wall of plants. It is a complex, dense, amorphous, secondary cell wall polymer found in the trachea elements and sclerenchyma of terrestrial plants.
Since plant absorbs carbon dioxide from air to form glucose and hence, starch; That is the source of carbon to build other macromolecules.
Water which it absorbs from soil is not of carbon content neither do plant take in microorganisms.
Plants obtain the majority of the carbon necessary for building these structural molecules from air
General, plants that have a very strong internal structure can grow larger than other plants because their structure can support their size. They absorbs carbon dioxide from air to form those carbon-containing molecules
Learn more about plants:
https://brainly.com/question/25832580
What is the gfm of CO2?
Answer:
44.01 g/mol because its basically the weight
Explanation: 12.0107 + 15.9994*2
The gfm (Gram Formula Mass) or molar mass of CO₂ (Carbon Dioxide) is calculated by adding the atomic masses of its constituents: one Carbon atom (12.01 g/mol) and two Oxygen atoms (32 g/mol). This adds up to 44.01 g/mol.
Explanation:You asked for the gfm (Gram Formula Mass) of CO₂. Gram Formula Mass is another term for molar mass, which is calculated by adding up the atomic masses of all the atoms in the molecule. In the case of CO₂, we have one atom of Carbon and two atoms of Oxygen.
The atomic mass of Carbon (C) is approximately 12.01 g/mol, and that of Oxygen (O) is approximately 16.00 g/mol. Since there are two Oxygen atoms, their combined mass is 2 * 16.00 = 32.00 g/mol.
Adding the atomic masses of Carbon and Oxygen together gives us the total gfm of CO2: 12.01 g/mol (Carbon) + 32.00 g/mol (Oxygen) = 44.01 g/mol (for CO₂).
Learn more about Gram Formula Mass of CO₂ here:https://brainly.com/question/35851636
#SPJ12
how to balance Na + FeBr3 →
Hey there!
Na + FeBr₂ → NaBr + Fe
Firstly, balance Br.
Two on the left, one on the right. Add a coefficient of 2 in front of NaBr.
Na + FeBr₂ → 2NaBr + Fe
Next, balance Na.
One on the left, two on the right. Add a coefficient of 2 in front of Na.
2Na + FeBr₂ → 2NaBr + Fe
Lastly, balance Fe.
One on the left, one on the right. Already balanced.
Our final balanced equation:
2Na + FeBr₂ → 2NaBr + Fe
Hope this helps!
1a. A spring takes a force of 5.ON to extend it by 2.0cm. What is the spring
constant in N/m?
Answer:
Use Hooke's law
Explanation:
Apply formula: F = kxSub values in: 5 = 0.02kUse algebra: k = 250The spring constant is 250 N/mA simple of helium measuring 6L was kept at a pressure is of 1.5 atm ,if pressure is doubled what would be its new volume ?
Answer:
3L
Explanation:
The following data were obtained from the question:
V1 (original volume) = 6L
P1 (original pressure) = 1.5 atm
P2 (new pressure) = 2 x P1 ( since the new pressure is doubled)
P2 = 2 x 1.5
P2 = 3 atm
V2 (new volume) =?
Using the Boyle's law equation P1V1 = P2V2, the new volume can be obtain as follow:
P1V1 = P2V2
1.5 x 6 = 3 x V2
Divide both side by 3
V2 = (1.5 x 6)/3
V2 = 3L
From our calculations, the new volume will be half the original volume and this will be 3L
What does a low solubility product constant indicate about a compound?
It conducts electricity in a solution.
It does not dissolve readily.
It readily dissociates in water.
Answer:
It does not dissolve readily.
Explanation:
What best describes the path of the gas particles in a given
sample of gas?
straight path, unaffected by collisions with other
particles
straight path which changes upon collisions with
other particles
curved path which changes upon collisions with
other particles
curved path, unaffected by collisions with other
particles
The statement which best describes the path of the gas particles in the sample of gas is the straight path which changes upon collisions with other particles.
What are gaseous state?Gaseous state is one of the state of matter in which particles are present at great distance from each other with random arrangement.
In a sample of gas, firstly gases particles will move in a straight line till then collision with another gas particle takes place. After the collision path of the gas particle changes and keeps on changes with the additional collision.
Hence firstly gas particles are move in a straight line.
To know more about gaseous state, visit the below link:
https://brainly.com/question/16982523
Which of the following combinations would produce a neutralization reaction?
A. a substance with a pH of 7 and a substance with a pH of 9.
B. a substance with a pH of 2 and a substance with a pH of 10.
C. a substance with a pH of 12 and a substance with a pH of 8.
D. two solutions with the same pH levels.
Explain please, i don't want rushed answers
Answer:
it is option b
Explanation:
this is because neutralisation reaction takes place only between a base and an acid.
now, in OPTION A it is a neutral and base
OPTIONB it is acid and base
OPTION C both are base
OPTION D IT IS NOT POSSIBLE
A neutralization reaction involves an acid and a base, with pH levels generally below and above 7 respectively. To identify a combination that would result in such a reaction, we require an acidic and a basic substance. Thus, the correct combination would be option B: a substance with a pH of 2 (acid) and a substance with a pH of 10 (base).
Explanation:The subject in question pertains to neutralization reactions in chemistry. A neutralization reaction typically involves a strong acid and a strong base reacting to form water and a type of salt. The pH scale measures how acidic or basic a solution is, and ranges from 0 to 14. If we remember that a pH of 7 is neutral, acids are typically represented with a pH less than 7, and bases are represented with a pH greater than 7, we can use that to find our answer.
Based on these principles, options A and C wouldn't yield a neutralization reaction because they both involve a neutral or basic substance with another base. Option D does not guarantee a neutralization reaction either as the two solutions could be both acidic or basic. Therefore, the correct choice would be option B: a substance with a pH of 2 (which would be an acid) and a substance with a pH of 10 (which would be a base). The acid-base combination would result in a neutralization reaction.
Learn more about Neutralization Reactionshttps://brainly.com/question/us15211597
#SPJ2
name the metal with valency 3
Gallium, because is a post-transition metal
A baseball is thrown high into the air. As it travels upwards it loses speed and slowly comes to a stop high above the grove what is it converting to
Answer:
Potential energy
Explanation:
The thrown baseball is converting from kinetic energy into potential energy. When it finally stops at a particular height, it attains its maximum potential energy at the position or point.
Potential energy is the energy at rest of body. Kinetic energy is the energy due to the motion of body.The more a body speeds, the higher its kinetic energy attained.
As a body comes to rest, at a height, it attains potential energy.
The body during flight decreases in kinetic energy but increases its potential energy due to gravity pulling it to rest.
The answer is Potential Energy.
Reasoning:
The thrown baseball is converting from kinetic energy into potential energy. When it finally stops at a particular height, it attains its maximum potential energy at the position or point. Potential energy is the energy at rest of body. Kinetic energy is the energy due to the motion of body. The more a body speeds, the higher its kinetic energy attained. As a body comes to rest, at a height, it attains potential energy. The body during flight decreases in kinetic energy but increases its potential energy due to gravity pulling it to rest.
calculate the mass in grams of a single water molecule
Final answer:
The mass of a single water molecule is approximated to be 2.99 × 10^-23 grams, using its molar mass of 18.015 g/mol and Avogadro's number, which indicates the number of molecules in one mole.
Explanation:
To calculate the mass in grams of a single water molecule, we first look at the molar mass of water (H2O) which is 18.015 g/mol. This is because one mole (6.022 × 1023 entities) of water molecules weighs 18.015 grams. The mass of a single water molecule is therefore:
(1 molecule / 6.022 × 1023 molecules/mol) × 18.015 g/mol
Performing the calculation, we find the mass of a single water molecule to be approximately:
(1 / 6.022 × 1023) × 18.015 g
= 2.99 × 10-23 g
The mass of a single water molecule is 2.99 × 10-23 grams.
Enter a chemical equation for NaOH(aq) showing how it is an acid or a base according to the Arrhenius definition. Consider that strong acids and bases dissociate completely.
Answer:
NaOH(aq) is a Base.
Explanation:
Those substances which give or release [tex]OH^{-}[/tex] ions in aqueous solution are called as the Arrhenius Bases.
In the aqueous solution, NaOH dissociates as follows -
[tex]NaOH^{}[/tex] ↔ [tex]Na^{+} + OH^{-}[/tex]
If it reacts with a strong acid HCl, the chemical equation for this reaction will be as follows -
[tex]HCl + NaOH = NaCl + H_{2} O[/tex]
The chemical equation that shows how NaOH is a base according to the Arrhenius definition is
NaOH(aq) → Na⁺(aq) + OH⁻(aq)
According to Arrhenius definition
An acid any substance that ionizes when it dissolves in water to give the hydrogen ion (H⁺) A base is any substance that ionizes when it dissolves in water to give the hydroxide ion (OH⁻)Now, we will write a chemical equation that shows the dissociation of NaOH in water.
The chemical equation for the dissociation of NaOH in water is
NaOH(aq) → Na⁺(aq) + OH⁻(aq)
Since, NaOH dissociates in water to the hydroxide ion (OH⁻), then it is a base according Arrhenius definition.
Hence, the chemical equation that shows how NaOH is a base according to the Arrhenius definition is
NaOH(aq) → Na⁺(aq) + OH⁻(aq)
Learn more here: https://brainly.com/question/15062109
What volume of 12 molar hydrochloric acid could be needed to create 1 L of a 1 molar solution of hydrochloric acid?
80 ml or 0.08 L of 1M HCl is needed to make 12 M HCl.
Explanation:
We have to use the law of Volumetric Analysis, to find the volume of the 12M solution using the volume and the molarity of the known solution of hydrochloric acid, using the law as,
V₁M₁ = V₂M₂
The above equation can be rewritten to find the volume as,
[tex]$ V2 = \frac{V1M1}{M2}[/tex]
Plugin the given values as,
[tex]$ V2 = \frac{1L\times 1M}{12 M}[/tex] = 0.08 L or 80 ml
How much power was used by a cyclist when it took them 2.5 hours to finish their race. The cyclist exerted a force of 32N and the race was 75km long. Must convert km to m prior to calculations. Must show all work, have correct sig figs, and include correct units for full credit.
Answer:
266.67 J/s
Explanation:
Work is said to be done when a force is applied to a certain object. It is given by the expression:
Workdone = Force × distance
However, the power (P) is the quantity or amount of work-done per time which is mathematically expressed as:
P = [tex]\frac{Workdone}{time}[/tex]
Given that:
time = 2.5 hours = (2.5 × 3600) seconds = 9000 seconds
Force = 32 N
distance = 75 km = (75 × 1000) m = 75, 000 m
∴ Workdone = 32 × 75, 000
Workdone = 2,400,000 Joules
Power = [tex]\frac{2,400,000}{9000}[/tex]
Power = 266.67 J/s
Answer:
Explanation:
Given:
Force, f = 32 N
Distance, d = 75 km
1 km = 1,000 m
75 km × 1000 m/1 km
= 75,000 m
Time, t = 2.5 hours
60 secs = 1 min
60 mins = 1 hour
2.5 hours × 60 mins/ 1 hour × 60 sec/1 min
= 9,000 secs
Power = energy/time
Energy = force × distance
Power = (32 × 75,000)/9,000
= 266.67 W
How many cups do you need for 4 moles rock salt (NaCl)? Rock salt weighs 520g per 1 cup
How many cups do you need for 1 kg of ice? Ice cubes weigh 220g per 1 cup
Answer :
(1) The number of cups needed are, 0.45 cups.
(2) The number of cups needed are, 5 cups.
Explanation :
Part 1:
First we have to calculate the moles of NaCl.
[tex]\text{Moles of NaCl}=\frac{\text{Mass of NaCl}}{\text{Molar mass of NaCl}}[/tex]
[tex]\text{Moles of NaCl}=\frac{520g}{58.5g/mol}=8.89mol[/tex]
Now we have to calculate the number of cups needed.
As, the number of cups needed for 8.89 mole of NaCl = 1 cups
So, the number of cups needed for 4 mole of NaCl = [tex]\frac{4}{8.89}=0.45[/tex] cups
Thus, the number of cups needed are, 0.45 cups.
Part 2:
Given:
Mass of ice cubes = 1 kg = 1000 g
Now we have to calculate the number of cups needed.
As, the number of cups needed for 220 g of ice = 1 cups
So, the number of cups needed for 1000 g of ice = [tex]\frac{1000}{220}=4.5\approx 5[/tex] cups
Thus, the number of cups needed are, 5 cups.
What pressure will be exerted by 0.57 moles of CO2 at a temperature of 25°C and a volume of 500 ML? _____atm
The pressure exerted by 0.57 moles of CO2 at a temperature of 25°C and a volume of 500 ml is 28 atm.
Explanation:
According to ideal gas law,
PV = nRT
where P represents the pressure of a gas,
V represents the volume of a gas,
n represents the number of moles,
R represents the gas constant = 0.0821 L atm / mol K.
T represents the temperature of a gas.
Given V = 500 ml = 0.5 l, T = 25°C = 298 K, n = 0.57 mol
PV = nRT
P = nRT / V
= (0.57 [tex]\times[/tex] 0.0821 [tex]\times[/tex] 298) / 0.5
P = 28 atm.
The pressure of a gas is 28 atm.
Final answer:
Using the ideal gas law, the pressure exerted by 0.57 moles of CO₂ gas at a temperature of 25°C and a volume of 500 mL is calculated to be 28.56 atm.
Explanation:
To calculate the pressure exerted by 0.57 moles of CO₂ gas at a temperature of 25°C (which is 298K when converted to Kelvin) and a volume of 500 mL (which is 0.5 L), we can use the ideal gas law equation PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/K·mol), and T is temperature in Kelvin.
To find the pressure (P), we rearrange the equation to P = nRT/V.
n (number of moles) = 0.57 moles R (ideal gas constant) = 0.0821 L·atm/K·mol T (temperature) = 298 K V (volume) = 0.5 LSubstituting the values into the equation we get: P = (0.57 · 0.0821 · 298) / 0.5
Now, we perform the calculation:
P = (0.57 · 0.0821 · 298) / 0.5 = 28.56 atm
Therefore, the pressure exerted by the CO₂ gas is 28.56 atm.
In an endothermic reaction, gaseous water decomposes to form hydrogen and oxygen gas.
2H2O (g) ----> 2H2 (g) + O2 (g) ∆H = 483.6 kJ
If the ∆H decreases to 241.8 kJ, how many grams of gaseous water decomposed?
Answer:
18 g of gaseous water
Explanation:
We are given the equation;
2H2O (g) ----> 2H2 (g) + O2 (g) ∆H = 483.6 kJ
We are required to determine the mass of gaseous water decomposed when the amount of heat absorbed is 241.8 kJ.
From the equation;
2 moles of water are decomposed when 483.6 kJ is absorbed
Therefore;
241.8 kJ will be absorbed to decompose;
= (2 × 241.8 kJ) ÷ 483.6 kJ
= 1 mole
But; molar mass of water is 18 g /mol
Therefore;
Mass of gaseous water decomposed is 18 g
how do astronomers explain the formation of the milky way galaxy
Galaxy Formation. One says that galaxies were born when vast clouds of gas and dust collapsed under their own gravitational pull, allowing stars to form. The other, which has gained strength in recent years, says the young universe contained many small "lumps" of matter, which clumped together to form galaxies.