PCl3(g) + Cl2(g) ⇋ PCl5(g) Kc = 91.0 at 400 K. What is the [Cl2] at equilibrium if the initial concentrations were 0.24 M for PCl3 and 1.50 M for Cl2 and 0.12 M PCl5.

Answer:

Ca(OH)₂ and HCl(aq)

Explanation:

We have the products of a reaction, CaCl₂ and H₂O. Since the products are a salt and water, this is likely to be a neutralization reaction. In such a reaction, an acid and a base react to form a salt and water.

The complete molecular equation is:

Ca(OH)₂ + 2 HCl(aq) → CaCl₂ + 2 H₂O

Answer:

We need 19.8 grams of butane

Explanation:

Step 1: Data given

Mass of CO2 produced = 59.8 grams

Molar mass CO2 = 44.01 g/mol

Molar mass butane =     58.12 g/mol

Step 2: The balanced equation

2 C4H10 + 13 O2 → 8 CO2 + 10 H2O

Step 3: Caclulate moles CO2

Moles CO2 = mass CO2 / Molar mass CO2

Moles CO2 = 59.8 grams / 44.01 g/mol

Moles CO2 = 1.36 moles

Step 4: Calculate moles butane

For 2 moles butane we need 13 moles O2 to produce 8 moles CO2 and 10 moles H2O

For 1.36 moles CO2 we need 1.36/4 = 0.34 moles butane

Step 5: Calculate mass butane

Mass butane = moles butane * molar mass butane

Mass butane = 0.34 moles * 58.12 g/mol

Mass butane = 19.76 grams ≈ 19.8 grams

We need 19.8 grams of butane

Answer:

See answer for details

Explanation:

In this case, we have the following substract:

Ph-CH2 - O - CH2CH3

That's the benzyl ethyl ether.

When this compound reacts with a concentrated Solution of HI, as we have an acid medium, we will have an SN1 reaction, where the Hydrogen will attach to the oxygen and the iodine will go to the most stable carbon, in this case, the carbon next to the ring is the most stable (because of the double bond of the ring, charges can be stabilized better this way), so product A will be the benzyl with the iodine and product B, will be the alcohol:

A: Ph - CH2 - I

B: CH3CH2OH

When B reacts again with HI, it's promoting another SN1 reaction, where the OH substract the H from the HI, the OH2+ will go out the molecule, leaving a secondary carbocation (CH2+) and then, the Iodine (I-) can go there via SN1 and the final product would be:

C: CH3CH2I

See picture for mechanism:

Final answer:

The student's question pertains to the reaction of benzyl ethyl ether with concentrated aqueous HI, following an SN1 mechanism. The reaction generates a halogenated product (A) and an alcohol (B), with the alcohol further reacting to form a reduction product (C). Specific structures cannot be provided without more information on the starting compound.

Explanation:

The student is inquiring about the reaction of benzyl ethyl ether with concentrated aqueous HI and the subsequent products. The reaction is characteristic of the SN1 mechanism of ether cleavage, particularly with ethers that have benzylic, allylic, or tertiary alkyl groups. In such reactions, the benzyl or allylic group forms a relatively stable carbocation, leading to the formation of a halogen product (product A), while the ether's other alkyl substituent becomes an alcohol (product B).

Further reaction of product B with HI would lead to the formation of product C, which is typically the reduction of the alcohol to an alkane or a similar process depending on the specific structure of product B. Without the detailed structure of benzyl ethyl ether, we cannot provide the exact structures of the final products A, B, and C.

Answer: 2.38 grams of silver forms when 3.00g of zinc metal is placed in an aqueous solution containing 3.75g of silver nitrate.

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ....(1)

[tex]\text{Number of moles of zinc}=\frac{3.00g}{65g/mol}=0.0462mol[/tex]

[tex]\text{Number of moles of silver nitrate}=\frac{3.75g}{170g/mol}=0.0220mol[/tex]

The chemical equation is:

[tex]Zn(s)+2AgNO_3(aq)\rightarrow Zn(NO_3)_2(aq)+1Ag(s)[/tex]

By stoichiometry of the reaction;

2 moles of silver nitrate reacts with 1 mole of zinc

Thus 0.0220 moles silver nitrate react with=[tex]\frac{1}{2}\times 0.0220=0.0110[/tex] moles of zinc

Thus silver nitrate will acts as limiting reagent and zinc acts as excess reagent.

2 moles of silver nitrate produces 2 mole of silver

Thus 0.0220 moles silver nitrate react with=[tex]\frac{2}{2}\times 0.0220=0.0220[/tex] moles of silver

[tex]0.0220mol=\frac{\text{Mass of silver}}{108g/mol}\\\\\text{Mass of silver}=2.38g[/tex]

Thus 2.38 grams of silver forms when 3.00g of zinc metal is placed in an aqueous solution containing 3.75g of silver nitrate.

To calculate the molality of a solution, divide the moles of solute by the mass of solvent (in kg). In this case, the molality of the NH4Cl solution is 7.45 m.

To calculate the molality of a solution, we need to first calculate the moles of NH4Cl and water.

Calculate the moles of NH4Cl by dividing the given mass by the molar mass of NH4Cl (53.49 g/mol): 4.40 g NH4Cl / 53.49 g/mol = 0.082 mol NH4Cl.

Calculate the moles of water by dividing the given mass by the molar mass of water (18.015 g/mol): 11.0 g H2O / 18.015 g/mol = 0.61 mol H2O.

Now we can calculate the molality using the moles of solute and the mass of the solvent:

Molality = moles of solute / mass of solvent (in kg)

Molality = 0.082 mol NH4Cl / 0.011 kg H2O = 7.45 m NH4Cl.

For more such question on molality visit:

https://brainly.com/question/13200956

#SPJ3

Answer:  96500 Coulombs are there in a Faraday.

Explanation:-

It is given that 1 mole of electrons has charge of 1 Faraday.

Moles of electron = 1 mole

According to mole concept:

1 mole of an atom contains [tex]6.022\times 10^{23}[/tex] number of particles.

We know that:

Charge on 1 electron = [tex]1.6\times 10^{-19}C[/tex]

Charge on 1 mole of electrons = [tex]1.6\times 10^{-19}\times 6.022\times 10^{23}=96500C[/tex]      

Thus 96500 C= 1 Faraday

Thus 96500 Coulombs are there in a Faraday.

There are approximately 96,485.33289 Coulombs in one Faraday.

The Faraday constant, denoted by F, is the charge of one mole of electrons. It is a fundamental physical constant with a value that has been experimentally determined. The Faraday constant is defined as the amount of charge carried by one mole of electrons, and its value is approximately 96,485.33289 Coulombs per mole.

The relationship between the Faraday constant and the charge in Coulombs can be expressed as:

[tex]\[ 1 \text{ Faraday} = 1 \text{ mole of electrons} \times \frac{6.022 \times 10^{23} \text{ electrons}}{1 \text{ mole of electrons}} \times \frac{1.602 \times 10^{-19} \text{ Coulombs}}{1 \text{ electron}} \][/tex]

Here, [tex]\(6.022 \times 10^{23}\)[/tex] is Avogadro's number, which is the number of particles (in this case, electrons) per mole, and [tex]\(1.602 \times 10^{-19}\)[/tex] is the elementary charge, which is the charge of a single electron in Coulombs.

Multiplying these values together gives:

[tex]\[ 1 \text{ Faraday} = 6.022 \times 10^{23} \times 1.602 \times 10^{-19} \text{ Coulombs} \] \[ 1 \text{ Faraday} = 96,485.33289 \text{ Coulombs} \][/tex]

Therefore, one Faraday is equivalent to approximately 96,485.33289 Coulombs. This is the standard value used in chemistry and physics for calculations involving the charge of electrons on a molar scale.

Answer:

The structure is shown below!

1. Ketone

2. Secondary alcohol

3. Ether

4. Primary alcohol

Explanation:

The molecule of zoapatanol is shown below, each oxygen is marked by a number. The functional group represents the organic function of the substance. Some substances can have more than one function.

The oxygen is presented in several organic compounds, such as alcohol, aldehyde, ketone, ether, ester, carboxyl acid, and others. The structure of each is different, so an alcohol has the oxygen bonded to a carbon and to a hydrogen (called hydroxyl); an aldehyde has the oxygen bonded to a terminal carbon; a ketone has the oxygen bonded to nonterminal carbon; the ether has an oxygen between carbons; the ester has an oxygen between carbons, and one of these carbons has a double bond with other oxygen, and a carboxyl acid has the terminal carbon bonded to an oxygen and to a hydroxyl.

If the hydroxyl is bonded to a primary carbon (which is bonded to only one carbon), then it's a primary alcohol, if it's bonded to a secondary carbon (which is bonded to 2 carbons), then it's a secondary alcohol, and if it's bonded to a tertiary carbon (which is bonded to 3 carbons), then it's a tertiary alcohol.

Analyzing the structure, the oxygens are:

1. Ketone

2. Secondary alcohol

3. Ether

4. Primary alcohol

Answer:

The mass of reactants and products are equal hence the reaction obeys law of conservation of mass

Explanation:

The law of mass conservation states that for a closed system to all transfer of mass, the mass of system must remain constant over time. This means for a chemical reaction, the mass of reactants must equal the mass of products.

if 2.796g of Zn reacts with 2.414g of sulphur to produce 4.169g of ZnS ad 1.041g of unreacted sulphur, then it means that accorfing to the law of mass conservation, the mass of reactants (zinc and sulphur), must be equal to mass of products (zinc sulfide and unreacted sulphur)

Mass of reactants = 2.796g + 2.414g =5.21g

Mass of products = 4.169g + 1.041g=5.21g

In accordance with the Law of Conservation of Mass, the total mass of the reactants (5.21g) is equal to the total mass of the products (5.21g). Therefore, the student's results obey the Law of Conservation of Mass.

The Law of Conservation of Mass states that matter can neither be created nor destroyed. Therefore, the total mass of the reactants should be equal to the total mass of the products in a chemical reaction.

Let's add up the mass of the reactants:

Total mass of reactants = 2.796g + 2.414g = 5.21g

Now, let's add up the mass of the products:

Total mass of products = 4.169g + 1.041g = 5.21g

As we can see, the total mass of the reactants is indeed equal to the total mass of the products. Thus, the student's results obey the Law of Conservation of Mass.

https://brainly.com/question/32183542

#SPJ3

Answer:

Explanation:

Melting range is one of the properties of solid that can help to identify its purity. It is necessary to note the whole range of temperature through which the transition takes place. The change in this range of melting temperature is indicative of impurity in the sample.

The lower end is the starting temperature at which solid starts to melt while the upper end is the temperature at which the last trace of solid converts to liquid.

Answer:

The temperature of the system once equilibrium is reached, is 292 Kelvin

Explanation:

Step 1: Data given

Mass of H2O = 34.05 grams  

⇒ temperature = 273 K

Mass of H2O at 310 K = 185 grams

Pressure = 1 bar = 0.9869 atm

Step 2: Calculate the final temperature

n(ice)*ΔH(ice fusion) + n(ice)*CP(H2O)(Tfinal- Ti,ice) + n(H20)*CP(H2O)*(Tfinal-Ti,H2O) = 0

Tfinal = [n(ice)*CP(ice)*Ti(ice) + n(H2O)*CP(H2O)*Ti(H20) - n(ice)*ΔH(ice fusion)] / [n(ice)*CP(ice) +n(H2O)*CP(H2O)]

⇒ with n(ice) = moles of ice = 34.05 grams / 18.02 g/mol = 1.890 moles

⇒ with CP(ice) = 75.3 J/K*mol

⇒ with Ti(ice) = the initial temperature of ice = 273 K

⇒ with n(H2O) = the moles of water = 185.0 grams / 18.02 g/mol = 10.27 moles

⇒ with CP(H2O) = CP(ice) = 75.3 J/K*mol

⇒ with Ti(H2O) = the initial temperature of the water = 310 K

⇒ with ΔH(ice, fusion) = 6010 J/mol

Tfinal = [1.890 moles * 75.3 J/K*mol * 273 + 10.27 mol * 75.3 J/K*mol * 310 K - 1.890 moles * 6010 J/mol] / [1.890 moles *75.3J/k*mol + 10.27 mol * 75.3 J/K*mol]

38852.541 + 239732.61  - 11358.9 = 267226.251

Tfinal= 291.8 ≈ 292 Kelvin

The temperature of the system once equilibrium is reached, is 292 Kelvin

We must use the principle of conservation of energy to equate the heat gained by the ice to the heat lost by the water, in a given equation, to calculate the final equilibrium temperature.

The topic here is thermodynamics, specifically calculating the final equilibrium temperature when two substances are mixed. Given the information, we can apply the principle of conservation of energy, which in this context is the heat gained by one substance is equal to the heat lost by the other. In this case, the heat gained by the ice (H2O(s)) as it melts and increases in temperature is equal to the heat lost by the water (H2O(l)). Therefore, we have the equation 34.05 g * 1 kcal/kg * K *(T - 273 K) + 34.05 g * 80 Cal/g = 185 g * 1 kcal/kg*K *(310 K - T) where T is the final temperature to be solved.

https://brainly.com/question/34419089

#SPJ3

Answer:

3500

Explanation:

The equilibrium constant of the reaction which has to be calculated is:-

2 NO2 (g) ⇋ N2(g) + 2 O2(g)

The given chemical equation follows:

1/2 N2 (g) + 1/2 O2 (g) ⇋ NO (g)

The equilibrium constant for the above equation is 0.004.

We need to calculate the equilibrium constant for the reverse equation of above chemical equation and also double of the above chemical equation, which is:

2NO (g) ⇋ N2 (g) + O2 (g)

The equilibrium constant for the reverse double reaction will be the reciprocal of the initial reaction.

If the equation is multiplied by a factor of '2', the equilibrium constant of the reverse reaction will be the square of the equilibrium constant  of initial reaction.

The value of equilibrium constant for reverse reaction is:

[tex]K_{eq}'=(\frac{1}{0.004})^2[/tex]  = 62500

The given chemical equation follows:

2NO2 (g) ⇋ 2NO (g) + O2 (g)

The equilibrium constant for the above equation is 0.056.

Thus, adding the both reaction gives the original reaction. So, equilibrium constant is:- 62500 x 0.056 = 3500

Final answer:

By manipulating and combining the equilibrium constants of related reactions, we find that the Kc for the reaction 2 NO2 (g) ⇋ N2(g) + 2 O2(g) is approximately 3500.

Explanation:

To calculate the equilibrium constant Kc for the reaction 2 NO2 (g) ⇌ N2(g) + 2 O2(g), we need to relate it to the known Kc values of the related reactions:

To find the Kc for the desired reaction, we use the concept of reaction quotients, where the product of the equilibrium constants of two related reactions that gives the target reaction when added together, equals the equilibrium constant of the target reaction. Mathematically, if the second reaction is reversed, its Kc is inverted. Then we can combine the two equations:

The equilibrium constant for the reverse double reaction will be the reciprocal of the initial reaction.

If the equation is multiplied by a factor of '2', the equilibrium constant of the reverse reaction will be the square of the equilibrium constant  of initial reaction.

The value of equilibrium constant for reverse reaction is

K_(eq)'=((1)/(0.004))^2  = 62500

The given chemical equation follows:

2NO2 (g) ⇋ 2NO (g) + O2 (g)

The equilibrium constant for the above equation is 0.056.

Thus, adding the both reaction gives the original reaction. So, equilibrium constant is:- 62500 x 0.056 = 3500

Answer:

The syringe should be at 2.50

Final answer:

To administer a 2.46 mL dose, draw up slightly more than this amount into the syringe and then adjust to the precise volume by expelling any excess. Ensure the plunger aligns with the 2.46 mL marking on the syringe for an accurate dose.

Explanation:

When administering medication in a clinical setting, it's important to measure the dosage accurately. If you've calculated that the correct dose is 2.46 mL, you should first draw up the liquid into the syringe to a volume slightly greater than needed, then carefully adjust down to the exact amount. For instance, you might withdraw 3-4 mL and then expel the excess until you have the precise 2.46 mL required for administration.

The technique of drawing up more than needed and then adjusting allows for removing air bubbles and ensuring an accurate dose. In practice, syringes often have volume marks in increments of 0.1 mL or 0.01 mL, depending on the syringe size. It is critical to use these markings and ensure that the top of the plunger aligns exactly with the marking for 2.46 mL when viewed at eye level.

Answer:

B = CHCl2 + Cl2 --> CHCl3 + Cl

Explanation:

Free radical halogenation is a chlorination reaction on Alkane hydrocarbons. This involves the splitting of molecules into radicals/ unstable molecules in the presence of sunlight/ U.V light which ensures bonding of the molecules.

Free radical chlorination is divided into 3 steps which are:

The initiation step

The propagation step

The termination step

So in reference to the question, propagation step involves two steps.

The first step is where the molecule in this case the methylene chloride(CH2Cl2) loses a hydrogen atom and then bond with a chlorine atom radical to give a nethylwnw chloride radical and HCl.

The second step involves the reaction of this methylene chloride got in the first step with chlorine molecule to form trichloride methane and a chlorine radical.

You would find in the attachment the 2 step mechanism.

The propagation steps in the monochlorination of methylene chloride (CH2Cl2) are option b and d. Propagation steps are characterized by the reaction of two radicals to form a non-radical species and a new radical, which will then enter the chain cycle. These steps occur after initiation and before termination in a radical chain reaction.

The question asks which options represent a propagation step in the monochlorination of methylene chloride (CH2Cl2). The correct answer is option b and d. These steps depict the reaction of CHCl2 with Cl2 with chlorine radical (.) or molecular chlorine (Cl2) to generate either CHCl3 and Chlorine radical (.) in option b or CHCl3 in option d, which are required for the propagation process in a halogenation reaction. It is essential to distinguish between initiation, propagation and termination steps in radical chain reactions, like this one, where a hydrogen atom on the methylene chloride is replaced by a chlorine atom.

Propagation steps are the 'middle' steps of these reactions. They are characterized by two radicals reacting to form a non-radical species and a new radical, which re-enters the propagation cycle. Both initiation and termination steps involve either the creation or removal of radicals, respectively. Radical chain reactions, halogenation, and methylene chloride are key concepts for understanding this question.

https://brainly.com/question/29731038

#SPJ11

Answer:

0.246 kg

Explanation:

There is some info missing. I think this is the original question.

A chemist adds 370.0mL of a 2.25 M iron(III) bromide (FeBr₃) solution to a reaction flask. Calculate the mass in kilograms of iron(III) bromide the chemist has added to the flask. Be sure your answer has the correct number of significant digits.

We have 370.0 mL of 2.25 M iron(III) bromide (FeBr₃) solution. The moles of FeBr₃ are:

0.3700 L × 2.25 mol/L = 0.833 mol

The molar mass of iron(III) bromide is 295.56 g/mol. The mass corresponding to 0.833 moles is:

0.833 mol × 295.56 g/mol = 246 g

1 kilogram is equal to 1000 grams. Then,

246 g × (1 kg/1000 g) = 0.246 kg

To identify the gas above the liquid in the cup, you can use a flaming splint and a glowing splint. If the gas supports combustion, it is oxygen.

The gas above the liquid in the cup can be identified using a flaming splint and a glowing splint. If the gas supports combustion and allows the flaming splint to burst into full flame, it is oxygen. If the gas extinguishes the glowing splint, it is a gas that does not contain oxygen. Oxygen is the only gas that will support combustion.

Answer:

[tex]CH_{3}CO_{2}H(aq.)+OH^{-}(aq.)\rightarrow CH_{3}CO_{2}^{-}(aq.)+H_{2}O(l)[/tex]

Explanation:

Acetic acid is an weak acid. Therefore it does not dissociate completely in aqueous solution.

Potassium hydroxide is a strong base. Therefore it dissociates completely in aqueous solution.

An acid-base reaction occurs between acetic acid and potassium hydroxide.

Molecular equation: [tex]CH_{3}CO_{2}H(aq.)+KOH(aq.)\rightarrow KCH_{3}CO_{2}(aq.)+H_{2}O(l)[/tex]

Total ionic: [tex]CH_{3}CO_{2}H(aq.)+K^{+}(aq.)+OH^{-}(aq.)\rightarrow K^{+}(aq.)+CH_{3}CO_{2}^{-}(aq.)+H_{2}O(l)[/tex]

Net ionic:[tex]CH_{3}CO_{2}H(aq.)+OH^{-}(aq.)\rightarrow CH_{3}CO_{2}^{-}(aq.)+H_{2}O(l)[/tex]

The net ionic equation for the reaction between aqueous acetic acid (CH3COOH) and aqueous potassium hydroxide (KOH) is CH3COOH + OH- --> CH3COO- + H2O. The K+ ions are spectator ions and thus removed from the net ionic equation.

To write a net ionic equation, we need to first balance the chemical reaction equation and then omit the spectator ions to get the net ionic equation. The balanced chemical reaction between aqueous acetic acid (CH3COOH) and aqueous potassium hydroxide (KOH) is: CH3COOH + KOH --> CH3COOK + H2O. After balancing the equation, we split the compounds into their ions: CH3COOH + K+ + OH- --> K+ + CH3COO- + H2O. Because K+ ions are present at both sides of the equation, they can be considered as spectators and therefore removed from our net ionic equation. Thus, the net ionic equation for the reaction is: CH3COOH + OH- --> CH3COO- + H2O.

https://brainly.com/question/36522237

#SPJ3

Answer:

The answer is granitic or felsic rocks

Explanation:

Felsic is a term used in geology applied to silicate minerals, magmas and rocks, rich in light elements such as silicon, oxygen, aluminum, sodium and potassium (describs igneous rocks that are relatively rich in elements that form feldspar and quartz). This term is a combination of the words "feldspar" and "silica". Felsic minerals are generally light in color and have a specific gravity of less than 3. The most common felsic minerals are quartz, muscovite, alkaline feldspars (eg orthoclase) and feldspars from the plagioclase series. The most common felsic rock is granite. At the opposite end of the rock spectrum are mafic (rich in iron) and ultramafic (rich in magnesium) rocks and minerals.

Final answer:

An igneous rock with quartz and potassium feldspar has a felsic mineralogic content, rich in silica and light-colored minerals, and typically has a lighter color due to low ferromagnesian content.

Explanation:

An igneous rock containing quartz and potassium feldspar would most likely be classified within the range of felsic igneous rocks. Felsic rocks are rich in silica and characteristically contain light-colored minerals such as quartz and feldspar. Specifically, the presence of quartz, a pure silica mineral, and potassium feldspar, which includes silica along with aluminum and potassium, indicates a felsic composition.

These rocks generally have high silica content (65-75%), and they also commonly include minor amounts of mafic minerals such as biotite mica and amphibole.

Felsic igneous rocks can be further understood by their mineral proportions which can include around 25% K-feldspar and 30% quartz, with additional albitic plagioclase and biotite or amphibole. Their color is generally lighter due to the predominance of light-colored minerals and their low content of ferromagnesian components like iron and magnesium.

Answer: Option A. forward rate = reverse rate

Explanation: for a system to be in dynamic equilibrium, it means that the rate of formation of product is the same as the rate of formation of reactant.

Answer:

See explanation below

Explanation:

This mechanism of polimerization is of one type. This mechanism goes through free radical polimerization, which means that we use a initiator as the radical source, then, the polimerization begins with the breaking of the covalent bonds of that initiator. In this case the benzoyl peroxide. And this mechanism is given in three steps.

In the picture you have the mechanism in the 3 steps:

Answer:

oxidation occurs at the cathode.

Explanation:

In a voltaic cell electrons move from anode to cathode. At the anode, species give up electrons. This is an oxidation reaction depicted by the oxidation half equation. At the cathode, species accept electrons and become reduced. This is depicted by the reduction half equation. In summary; in a Voltaic cell, oxidation occurs at the anode while reduction occurs at the cathode.

In a voltaic cell, oxidation does not occur at the cathode.

A voltaic cell is an electrochemical cell that converts chemical energy to electrical energy, hence it can be used as a source of energy.  It consists of two separate half-cells. There is a salt bridge between the two half cells allowing for the  free flow of ions from one cell to another.

There are two electrodes, the anode undergoes oxidation and the cathode undergoes reduction. Electrons flow from the anode to the cathode.

Find out more at: https://brainly.com/question/1370699

The question is incomplete. The complete question is stated below:

Two point charges are held at the corners of a rectangle as shown in the figure. The lengths  of sides of the rectangle are 0.050 m and 0.150 m. Assume that the electric potential is defined  to be zero at infinity.

a. Determine the electric potential at corner A.

b. What is the electric potential energy of a +3 µC charge placed at corner A?

Answer / Explanation:

a )V(A) = 1 / 4πe° ( - 5 5x10∧6C / 0.150m + 2x10∧6C / 0.050m )

The answer to the equation above is : = +6.0x10∧4 j/c

b) U(A) = qV(A)= (3.0x10∧6C) (6.0x10∧4 . j/c)  =

The answer to the equation above is : =0.18 J

Explanation:

Where V(A) is equivalent to the electric potential

U(A) is equivalent to the electric potential energy

Final answer:

Explanation of electric potential energy in physics.

Explanation:

Electric potential energy is the energy a charge possesses due to its position in an electric field. It is given by the formula U = k * Q1 * Q2 / r, where k is Coulomb's constant, Q1 and Q2 are the charges, and r is the distance between them.

)V(A) = 1 / 4πe° ( - 5 5x10∧6C / 0.150m + 2x10∧6C / 0.050m )

The answer to the equation above is : = +6.0x10∧4 j/c

b) U(A) = qV(A)= (3.0x10∧6C) (6.0x10∧4 . j/c)  =

The answer to the equation above is : =0.18 J

Answer:

The rank is: C₆H₁₂O₆ < NaBr < CaCl₂ < Cr(NO₃)₃

Explanation:

To take into account, the greater the number of ions that are produced in a solution, the entropy will be greater. In this case, we have that the number of ions of each compound is:

Cr(NO₃)₃ → Cr³⁺ + 3NO⁻₃ (it has 4 ions)

CaCl₂ → Ca²⁺ + 2Cl⁻ (it has 3 ions)

NaBr → Na⁺ + Br⁻ (it has 2 ions)

C₆H₁₂O₆ (does not ionize)

The concentration of benzene is 10 mg/L or 10 ppm. To find molarity, we convert the mass of benzene to moles using its molar mass and then divide by the volume of the solution in liters. The molarity of the benzene is 1.28 x 10^-4 M.

The concentration of benzene in the liter of water is 10 mg/L. This is because the question states that 10 mg of benzene is dissolved in one liter of water, and this is directly the concentration in mg per liter. To express this concentration in parts per million (ppm), we recall that 1 ppm is equivalent to 1 mg of substance per liter of water, since the density of water is approximately 1 g/mL, and there are 1000 g in a liter of water. Therefore, the concentration in ppm is also 10 ppm.

To calculate the molarity of benzene, we must first determine the molar mass of benzene, which is 78.11 g/mol (C6H6: 6 x 12.01 for carbon + 6 x 1.008 for hydrogen). The number of moles of benzene in 10 mg can be found using the formula: moles = mass (g) / molar mass (g/mol). Since we have 10 mg, we must first convert this to grams: 10 mg = 0.01 g. Thus, the number of moles of benzene is 0.01 g / 78.11 g/mol = 1.28 x 10-4 moles. Given that this is the amount in 1 liter, the molarity is 1.28 x 10-4 M.

Final answer:

The concentration of benzene is 10 mg/L, which is equivalent to 10 ppm as 1 L of water is approximately 1 kg. To find molarity, convert mass to moles using the molar mass of benzene, resulting in a molarity of 1.28 x 10⁻⁴ M for benzene in the solution.

Explanation:

The concentration of benzene in the water is already provided in mg/L, which is 10 mg/L. To express this concentration in parts per million (ppm), we use the fact that ppm is equivalent to mg/kg. Since the density of water is approximately 1.00 g/mL, 1 L of water weighs 1000 g, or 1 kg. Therefore, 10 mg of benzene in 1 kg of water is also 10 ppm.

To calculate the molarity of benzene (C₆H₆), we need the molar mass of benzene which is approximately 78.11 g/mol. Using the formula molarity = moles of solute / liters of solution, we first convert mg to grams: 10 mg = 0.010 g. The number of moles of benzene is calculated as 0.010 g / 78.11 g/mol which gives us 1.28 x 10⁻⁴ moles. Therefore, the molarity of benzene in the solution is 1.28 x 10⁻⁴ M.

Explanation:

According to the collision theory the rate of chemical reaction directly proportional to number of reaction between the reactant molecules. More the number of collision between the reactant molecules, more would  be the changes of reaction to occur that reactant converting into product.

Moreover, with an increase in concentration of reactant molecules, the chances of collision between the molecules increase and hence the rate of reaction also increase. Thus, we can say higher the concentration higher will be the rate of reaction.

Thus the above response about the theory is correct.

Learn more about Collision theory here:

https://brainly.com/question/24110608

Answer: Histones, DNA methylation

Explanation:

The double stranded DNA are wrapped twice around a histone protein and depending on how loosely or tightly DNA are wounded around histion, DNA can be either read or not. The nature of histones have the ability to control which sections of DNA get copied and expressed. Histone synthesis stops when DNA synthesis ceases, histone are modified by acetylation, methylation ADP--ribosylation and phosphorylation. It has shown that environmental factors such as diet can have an effect on protein structure. Alteration of the histone protein structure can affect the expression of some genes.

DNA methylation can also inhibit the expression of some genes, which can be caused by environmental factit's.

Environmental factors can influence DNA and its packaging at the molecular level through epigenetic regulation and histone modification.

Environmental factors can have an influence on DNA and its packaging at the molecular level. One way is through epigenetic regulation, where environmental factors can cause chemical modifications to DNA and histone proteins. For example, certain environmental factors can lead to the addition of methyl groups to specific cytosine nucleotides in DNA, which can affect gene expression. Another way is through the modification of histone proteins, such as acetylation and deacetylation, which can influence the packaging state of DNA and its accessibility for transcription.

The question is incomplete, here is the complete question:

A student sets up the following equation to convert a measurement. (The stands for a number the student is going to calculate.) Fill in the missing part of this equation.

[tex]23.Pa.cm^3=?kPa.m^3[/tex]

Answer: The measurement after converting is [tex]23\times 10^{-9}kPa.m^3[/tex]

Explanation:

We are given:

A quantity having value [tex]23.Pa.cm^3[/tex]

To convert this into [tex]kPa.m^3[/tex], we need to use the conversion factors:

1 kPa = 1000 Pa

[tex]1m^3=10^6cm^3[/tex]

Converting the quantity into [tex]kPa.m^3[/tex], we get:

[tex]\Rightarrow 23.Pa.cm^3\times (\frac{1kPa}{1000Pa})\times (\frac{1m^3}{10^6cm^3})\\\\\Rightarrow 23\times 10^{-9}kPa.m^3[/tex]

Hence, the measurement after converting is [tex]23\times 10^{-9}kPa.m^3[/tex]

Answer:

71.2 %

Explanation:

This is a problem we can solve by making use of the stoichiometry of the balanced  ( very important !) chemical reaction:

CaCO3(s) + 2HCl(aq) → CO2(g) + CaCl2(aq) + H2O(l)

Now  determine  the moles of CaCO3 and CO2 and perform the calculations

# mol CaCO3 = 10.51 g / 100.09 g/mol = 0.105 mol

From the stoichiometry of the reaction, we know 1 mol CO2 is produced per mol of CaCO3, thus whe should expect

0.105 mol CaCO3 x 1 mol CO2/ mol CaCO3 = 0.105 mol

lets compare this theoretical value with the one obtained:

mol CO2 obtained = 3.29 g / 44 g/mol = 0.075

Therefore our yield is

(0.075mol / 0.105 mol) x 100 = 71.2 %

The initial pH of buffer C can be determined using the Henderson-Hasselbalch equation. Upon addition of NaOH, the buffer seeing less change in pH has greater buffer capacity, a measure of its resistance to pH changes upon addition of acid or base. Buffer solutions are most effective when the concentration of the weak acid and its conjugate base are equal.

The topic you're dealing with pertains to buffer solutions in chemistry. In your given example with buffer C, you've mixed 8.203 g of sodium acetate with 100.0 ml of 1.0 M acetic acid. Here, the initial pH of the buffer can be calculated using the Henderson-Hasselbalch equation.

This equation states that pH = pKa + log([A-]/[HA]), where [A-] is the molar concentration of the base (sodium acetate) and [HA] is the molar concentration of the acid (acetic acid). You need to find the values of [A-] and [HA] and insert it in this formula to get the initial pH of buffer C.

Upon addition of NaOH solution to buffers B and C, the buffer whose pH changes less will be the one with the greater buffer capacity. This is because buffer capacity is a measure of the resistance of a buffer solution to pH change upon the addition of an acid or a base. Buffer capacity is maximized when [A-] = [HA], and a buffer solution loses its effectiveness when one component (either A- or HA) is less than about 10% of the other.

https://brainly.com/question/30467257

#SPJ11

Answer:

[tex]Cr_2O_3 (s) + 2Al (l)[/tex] ⇒ [tex]2Cr (l) + Al_2O_3 (l)[/tex]

The balanced chemical equation (including the states of matter) is

Cr₂O₃(s) + 2Al(l) ⇒ 2Cr(l) + Al₂O₃(l)

Solid chromium(III) oxide reacts with liquid aluminum to give liquid

chromium and liquid aluminum oxide. This reaction occurs at high

temperature because the reactivity is increased under this condition.

TYhe liquid aluminium is oxidized to form liquid aluminum oxide and the

Solid chromium(III) oxide is reduced to form liquid chromium and can be

referred to as  a redox reaction.

Read more about Redox reaction here https://brainly.com/question/21851295

Answer:

NaHCO3 + HCl --> NaCl + CO2 + H2O

Explanation:

NaHCO3 which is an acidic salt because of the replaceable H+ (Bronste lowry acid), by definition acid dissociates in water to release a proton.

NaHCO3 dissociates in water to give Na+, H3O+ and HCO3-

Stomach acid which is HCl also dissociates in water to give H3O+ and Cl-

The H3O+ and HCO3- combines briefly to form a weak carbonic acid almost immediately, which then further dissociates to form H2O and CO2. CO2 is burped out from the mouth.

Na+ and Cl- combines to form NaCl in water which is a table salt solution.

Below is an attachment containing the step by step reactions

One of the ingredients in Alka-Seltzer, sodium bicarbonate, reacts with stomach acid (HCl) to produce salt, water, and carbon dioxide, neutralizing the acid. This is represented by the equation NAHCO3 + HCl -> NaCl + H2O + CO2.

The antacid Alka-Seltzer® contains an active ingredient called NAHCO3, also known as sodium bicarbonate. When Alka-Seltzer is taken, the sodium bicarbonate reacts with the stomach acid, or hydrochloric acid (HCl), to neutralize it. This chemical reaction can be represented by the equation: NAHCO3 + HCl -> NaCl + H2O + CO2. Thus, Alka-Seltzer works to relieve symptoms caused by excess stomach acid by producing salt, water, and carbon dioxide.

https://brainly.com/question/32758314

#SPJ3