How many valence electrons does chlorine have?
What country was overrun by the Japanese
Chemistry is defined as the study of the composition and structure of materials and
Chemistry is the study of matter, its properties, and transformations in various applications.
Chemistry is the branch of science that deals with the structure, composition, properties, and reactive characteristics of matter. It studies everything around us, from the liquids we use to the composition of materials like plastics and metals. Chemists play a crucial role in designing, predicting, and controlling chemical transformations for various applications.
A box has a weight of 120 lbs and the bottom of the box is 12 in2 . What is the pressure the box exerts on the floor?
The box exerts a pressure of 10 pounds per square inch (lbs/in²) on the floor, calculated by dividing the weight of the box (120 lbs) by the area of its bottom (12 in²).
The pressure exerted by the box on the floor can be calculated using the formula for pressure, which is the force applied (in this case, the weight of the box) divided by the area over which the force is distributed.
The weight of the box is given as 120 lbs, and the area of the bottom of the box in contact with the floor is 12 in². To find the pressure, we divide the weight by the area:
Pressure = Weight / Area
Pressure = 120 lbs / 12 in² = 10 lbs/in²
Therefore, the box exerts a pressure of 10 pounds per square inch (lbs/in²) on the floor.
The point where the blue line intercepts the temperature axis is…
the temperature where actual volume of gas reduces to zero
or
the theoretical zero volume temperature of a gas
Answer:
The theoretical zero volume temperature of a gas.
Explanation:
The experimental data for effect of temperature on Volume of a gas is plotted in the graph. The graph is a straight line. It has been extrapolated where dash line meets the temperature axis. This point shows the temperature that the gas would have if it had zero volume. Experimentally, this data is not obtained but theoretically measured by extrapolating the volume versus temperature curve.
Thus, the point where blue line meets is the theoretical zero volume temperature of a gas.
how do i calculate the mass of CO2 emitted per Kj of heat produced in a combustion reaction?
The method for calculation of the mass of CO2 emitted per Kj of heat produced in a combustion reaction has been explained below..
To answer this, let us use the combustion reaction of methanol which is;
CH3OH (l) + (3/2)O2 (g) = CO2 (g) + 2H2O (g)
We can find the enthalpy of combustion of this reaction from tables or it will be given to us. Let us use; ΔH = -638.54 KJ
This means for every 1 mole of CO2, the heat released is -638.54 KJ
Now, Molar mass of CO2 is 44 g/mol
Thus;
Mass of CO2 per Kj of heat produced is;
44 g/mol × 1 mol/-638.54 KJ
>> 6.89 × 10^(-2) g/kJ
Read more at; https://brainly.com/question/12996596
If the plum pudding model of the atom was correct, what should the results of Rutherford’s experiment be?
Most of the positively charged particles should bounce back at a range of angles as they collide with the atoms in the foil; only a few should pass straight through the foil.
Most of the positively charged particles should pass straight through the foil because they move easily through the positively charged matter in the gold atoms.
Most of the positively charged particles should collide with the foil and stay there because they stick to the negatively charged gold atoms.
only a few should pass
The result of Rutherford's experiment demonstrates that most of the positively charged particles should bounce back at a range of angles as they collide with the atoms in the foil; only a few should pass straight through the foil. Thus, the correct option is A.
Who was Ernest Rutherford?Ernest Rutherford was a British physicist who remarkably discovered the atomic nucleus first and proposed a nuclear model of the atom. He also performs an experiment on the Gold foil.
The nuclear model experiment of Rutherford showed that the atom is mostly empty space with a small, dense, positive charge. In the Gold foil experiment, most of the alpha particles did pass straight through the foil, while others bounce back at a range of angles.
Therefore, the correct option for this question is A.
To learn more about Ernest Rutherford, refer to the link:
https://brainly.com/question/17442623
#SPJ2
If the speed of light is 3.0 x 10(8) m/s, then what is the wavelength of a photon that has a frequency of 4.45 x 10(14) Hz?
the application of scientific knowledge to benefit people is___. A. technology B. society C. ethics D. economics
if an atom has a mass of 15 and an atomic number of 9. How many neutrons are in the atoms?
What occurs when a magnesium atom becomes a magnesium ion?
Final answer:
A magnesium atom becomes a magnesium ion by losing two electrons, forming a Mg²⁺ ion with a 2+ charge. This process results in the magnesium atom achieving the stable electron configuration of the noble gas, neon. The formation of a magnesium ion is an oxidation reaction and is vital in forming ionic compounds like magnesium oxide.
Explanation:
When a magnesium atom becomes a magnesium ion, it undergoes a process in which it loses two electrons. This occurs because magnesium is located in group 2 of the periodic table, indicating that it is a metal with two valence electrons. Metals tend to form positive ions, or cations, by losing electrons. As magnesium loses two electrons, it achieves the electronic configuration of neon, the preceding noble gas, resulting in a more stable electron arrangement. Consequently, the magnesium ion has a 2+ charge and is symbolized by Mg²⁺.
The formation of a magnesium ion involves oxidation, where the Mg atoms lose electrons and the electrons are accepted by another atom, such as oxygen, to form ionic compounds like magnesium oxide (MgO). In the case of magnesium and chlorine, when they form an ionic compound, magnesium provides two electrons, one to each chlorine atom, resulting in a Mg²⁺ ion and two Cl⁻ ions, making the ionic compound MgCl₂.
If every oxygen ion (combined with an aluminum ion) has a charge of –2, what must the charge of each aluminum ion be? How can you tell this? Also, what has to happen to an uncharged aluminum atom so that it will bond with oxygen?
Why does gas take the shape and volume on its container
Dopamine is a substance released into a synapse to carry an inhibitory message. It is therefore classified as a (n)
Inhibitory neurotransmitter
Explanation;Dopamine is a special neurotransmitter since it is considered to be both excitatory and inhibitory. The function of Dopamine depends on the location in the brain adn the particular receptor site it binds to. Excitatory neurotransmitters stimulate the brain while the inhibitory neurotransmitter balance mood and are easily depleted when the excitatory neurotransmitters are overactive.What happens to the atomic size of the elements as one goes from the bottom to the top of a group?
A) Atomic size stays the same as one moves from bottom to top in a group.
B) Atomic size decreases as one moves from bottom to top in a group.
C) Atomic size increases as one moves from bottom to top in a group.
D) Atomic size changes randomly as one moves from bottom to top in a group.
Answer: Option (B) is the correct answer.
Explanation:
When we move from top to bottom in a group then size of elements keep of increasing due to the addition of more number of electrons into new shells.
But when we move across a period then there occurs a decrease in size of the elements due to the addition of electrons into the same shell.
So, if we move from bottom to top then it means there is decrease in size of atoms as number of electrons decreases then.
Thus, we can conclude that atomic size decreases as one moves from bottom to top in a group.
N2(
g. 3h2(
g. 2nh3(
g., what will happen if more nitrogen gas is added?
Ammonia and sulfuric acid react to form ammonium sulfate. Determine the starting mass of each reactant if 20.3 g of ammonium sulfate is produced and 5.89g of sulfuric acid remains unreacted.
How much 10% solution and how much 45% solution should be mixed together to make 100 gallons of 25% solution?
To mix a 100 gallons of 25% solution from 10% and 45% solutions, create a system of equations representing total volume (x+y=100) and solute balance (0.10x+0.45y=25) to solve for x and y, which represent the volumes of 10% and 45% solutions needed.
Explanation:The question is asking how to mix different concentrations of a solution to achieve a desired concentration in a specific total volume. To find out how much 10% solution and how much 45% solution are needed to make 100 gallons of a 25% solution, we can use a system of linear equations based on the concept of mass balance. The total amount of the solute in the final solution must be equal to the sum of the amounts in the individual components before mixing.
Let's denote x as the volume of the 10% solution and y as the volume of the 45% solution to be mixed. The mass of solute in the mixture must equal the mass of solute from both parts added together. Since we want 100 gallons of 25% solution, we can create the following equations:
Equation 1 (total volume): x + y = 100Equation 2 (solute balance): 0.10x + 0.45y = 0.25(100)Solving this system of equations will give the values of x and y, the volumes of 10% solution and 45% solution needed respectively. This involves substitution or elimination methods to find the solution to the system.
Final answer:
To solve for the amounts of 10% solution and 45% solution needed to make 100 gallons of a 25% solution, set up a system of linear equations using the total volume and concentration equations and solve for the two unknowns.
Explanation:
This problem is an example of a classic mixture problem in algebra, where we aim to find the proportions of two solutions of different concentrations to mix together to end up with a specific final concentration. We have two different solutions with concentrations of 10% and 45%, and we want to combine them to make 100 gallons of a 25% solution.
To solve this problem, let's let x represent the number of gallons of the 10% solution and y the number of gallons of the 45% solution. The total volume should be 100 gallons, so:
x + y = 100 gallons ... (1)
Now, we need to set up an equation based on the concentrations:
0.10x + 0.45y = 0.25(100)
0.10x + 0.45y = 25 ... (2)
Now we have a system of two equations:
x + y = 100
0.10x + 0.45y = 25
You can solve this system using either the substitution or elimination method. The solution will give you the amounts of 10% solution and 45% solution needed to obtain 100 gallons of 25% solution.
Why is the half life of a radioactive substance independent of the initial amount of the substance that is present
suppose an atom has a mass number of 23. which statement is true beyond any doubt? A.the atom has an odd number of neutrons.
B.the atomic number is less then 11.
C.the atom is not an isotope.
D.the number of protons in the nucleus dose not equal the number of neutrons.
The formula K₂S indicates that _______.
The dipole moment (μ) of hbr (a polar covalent molecule) is 0.797d (debye), and its percent ionic character is 11.8 % . estimate the bond length of the h−br bond in picometers.note that1 d=3.34×10−30 c⋅m andin a bond with 100% ionic character, q=1.6×10−19
c.
The bond length of H-Br in the HBr molecule, estimated using the dipole moment and the percent ionic character, is approximately 159 picometers.
Explanation:The dipole moment (μ) of a molecule is given by the product of the charge (q) and the distance between the charges (d). In this case, you have been provided with the dipole moment, the physical constants, and the percent ionic character. Let's use these details to estimate the bond length. According to the given data, the dipole moment (μ) is 0.797 D, which is equivalent to 0.797 * 3.34*10^-30 C.m (as 1 D = 3.34*10^-30 C.m).
Since HBr has 11.8% ionic character, the effective charge (q_eff) is 11.8% of the charge of one electron, which is 1.6*10^-19 C. Therefore, q_eff = 0.118 * 1.6*10^-19 C. Thus, using the definition μ = q_eff . d (d = bond length), we can solve for d = μ / q_eff. Substituting the given and calculated values, we get d is approximately equal to 159 picometers.
Learn more about Bond Length here:https://brainly.com/question/35458389
#SPJ3
The estimated bond length of the [tex]\( \text{H-Br} \)[/tex] bond in picometers is approximately [tex]21 Pm[/tex].
To estimate the bond length of [tex]\( \text{HBr} \),[/tex] we will use the given dipole moment and percent ionic character.
Given.
- Dipole moment [tex](\( \mu \))[/tex] of [tex]\( \text{HBr} \)[/tex] = 0.797 d [tex](debye)[/tex]
- Percent ionic character = 11.8%
First, convert the dipole moment from debye to SI units coulomb meters.
[tex]\[ \mu = 0.797 \text{ d} \][/tex]
Since [tex]\( 1 \text{ d} = 3.34 \times 10^{-30} \text{ C} \cdot \text{m} \),[/tex]
[tex]\[ \mu = 0.797 \times 3.34 \times 10^{-30} \text{ C} \cdot \text{m} \][/tex].
[tex]\[ \mu = 2.66198 \times 10^{-30} \text{ C} \cdot \text{m} \][/tex].
Calculate the bond moment in a purely ionic bond [tex](\( \mu_{\text{ionic}} \)):[/tex]
For a bond with 100% ionic character, the dipole moment is given by.
[tex]\[ \mu_{\text{ionic}} = \sqrt{q \cdot r^2} \][/tex]
where [tex]\( q \)[/tex] is the charge in coulombs and [tex]\( r \)[/tex] is the bond length in meters.
Given [tex]\( q = 1.6 \times 10^{-19} \) C (charge for 100% ionic character),\[ \mu_{\text{ionic}} = \sqrt{1.6 \times 10^{-19} \cdot r^2} \][/tex]
Solve for [tex]\( r \):[/tex]
[tex]\[ \mu_{\text{ionic}} = 2.66198 \times 10^{-30} \text{ C} \cdot \text{m} \][/tex]
[tex]\[ \sqrt{1.6 \times 10^{-19} \cdot r^2} = 2.66198 \times 10^{-30} \][/tex]
[tex]\[ 1.6 \times 10^{-19} \cdot r^2 = (2.66198 \times 10^{-30})^2 \][/tex]
[tex]\[ 1.6 \times 10^{-19} \cdot r^2 = 7.0865 \times 10^{-60} \][/tex]
Divide both sides by [tex]\( 1.6 \times 10^{-19} \)[/tex].
[tex]\[ r^2 = \frac{7.0865 \times 10^{-60}}{1.6 \times 10^{-19}} \][/tex]
[tex]\[ r^2 = 4.42906 \times 10^{-41} \][/tex]
Take the square root to find [tex]\( r \)[/tex]
[tex]\[ r = \sqrt{4.42906 \times 10^{-41}} \][/tex]
[tex]\[ r \approx 2.105 \times 10^{-21} \text{ m} \][/tex]
Convert meters to picometers
[tex]\[ r \approx 2.105 \times 10^{-21} \text{ m} \times 10^{12} \text{ pm/m} \][/tex]
[tex]\[ r \approx 21.05 \text{ pm} \][/tex]
13C and 14C are isotopes of 12C, which has 6 electrons, 6 protons, and 6 neutrons. What is the arrangement of subatomic particles in 14C?
1.Which is a characteristic of nuclear fission?
-releases nonradioactive waste only
-involves the collision of two nuclei
releases small amounts of energy compared to -fossil fuels
-involves the splitting of an atom into two or more fragments
2.Both nuclear fusion and nuclear fission reactions
-release radioactive waste.
-involve the splitting of atoms.
-are utilized in nuclear power plants.
-release large amounts of energy.
3.Which type of reaction does this diagram represent? (see attachment)
1) The characteristics of nuclear fission reaction are [tex]\boxed{{\text{it involves splitting of an atom into two or more fragments}}}[/tex].
2) Both the nuclear fission and fusion reaction [tex]\boxed{{\text{release large amount of energy}}}[/tex].
3) The type of reaction shown in the diagram is [tex]\boxed{{\text{nuclear fission reaction}}}[/tex].
Further explanation:
Nuclear fission is defined as the splitting of heavy nucleus into two lighter ones. For example, a sample of uranium is bombarded with neutrons in an attempt to produce new elements with Z greater than 92. The lighter elements such as barium (Z = 56) were formed during the reaction and such products originate from the neutron-induced fission of uranium-235.
The reaction that shows nuclear fission is as follows:
[tex]_{{\text{92}}}^{{\text{235}}}{\text{U}} + _{\text{0}}^{\text{1}}{\text{n}} \to _{{\text{56}}}^{{\text{141}}}{\text{Ba}} + _{{\text{36}}}^{{\text{92}}}{\text{Kr}} +{\text{3}}_{\text{0}}^{\text{1}}{\text{n}}[/tex]
The krypton-92 is the fission product. In this, the nucleus usually divides asymmetrically rather than symmetrically dividing into two equal parts, and the fission of a given nuclide does not give the same products.
In a nuclear fission reaction, more than one neutron is released by each nucleus on division. When these neutrons collide and induce fission in other nuclei, a series of nuclear fission reactions known as a nuclear chain reaction occurs.
In nuclear fusion, two light nuclei join to produce a heavier and more stable nucleus. Nuclear fusion is the opposite phenomenon of nuclear fission. The reaction that shows nuclear fusion is as follows:
[tex]{\text{2}}_{\text{1}}^{\text{2}}{\text{H}} \to _{\text{2}}^{\text{3}}{\text{He}} + _{\text{0}}^{\text{1}}{\text{n}}[/tex]
Nuclear fission and fusion reactions both produce large amount of energy.
1)
The characteristics of nuclear fission reaction are that it involves splitting of an atom into two or more fragments because it is a process in which a heavy nucleus splits into two lighter ones.
2)
Both the nuclear fission and fusion reaction involves splitting and collision of atoms that produce large amount of energy. Hence, both the reaction releases a large amount of energy.
3)
The type of reaction shown in the diagram is nuclear fission. In the diagram, a large atom split into two small atoms and again the atom forms split into two smaller atoms include a series of reactions called nuclear chain reaction. The nuclear chain reaction is a series of nuclear fission reactions in which neutrons collide and induce fission in other nuclei.
Learn more
1. Identify the precipitate of compounds https://brainly.com/question/2094744
2. How many covalent bonds does nitrogen forms https://brainly.com/question/2094744
Answer details
Grade: Senior School
Subject: Chemistry
Chapter: Nuclear binding energy
Keywords: Nuclear fission, nuclear fusion, splits, bombardment, uranium, krypton, heavy nucleus, nuclear chain reaction.
For the reaction shown, calculate how many grams of each product form when the following amounts of reactant completely react to form products. Assume that there is more than enough of the other reactant.
2Al(s)+Fe2O3(s)→Al2O3(s)+2Fe(l)
4.3 gAl
Using stoichiometry, we find that when 4.3 g of Al reacts, 8.14 g of Aluminium Oxide and 8.89 g of Iron are formed.
Explanation:To calculate the grams of products formed in a reaction, we use stoichiometry, which is based on the law of conservation of mass. Here, for every 2 moles of Al (Aluminium, 26.98 g/mol) reacted, 1 mole of Al2O3 (Aluminium oxide, 101.96 g/mol) and 2 moles of Fe (Iron, 55.85 g/mol) are formed.
To calculate the amount in grams of each product for 4.3 g of Al reacted, we first need to convert this amount into moles of Al by dividing by its molecular weight. Then we use the stoichiometry of the reaction to find the amount of product formed.
(4.3 g Al) * (1 mol Al / 26.98 g Al) = 0.159 moles Al
For Aluminium oxide: (0.159 mol Al) * (1 mol Al2O3 / 2 mol Al) * (101.96 g Al2O3 / 1 mol Al2O3) = 8.14 g Al2O3
For Iron: (0.159 mol Al) * (2 mol Fe / 2 mol Al) * (55.85 g Fe / 1 mol Fe) = 8.89 g Fe
Learn more about Stoichiometry here:https://brainly.com/question/30215297
#SPJ12
The most important lab safety rule is
Final answer:
The most important lab safety rule is to follow all safety instructions and guidelines given by your teacher and lab instructions.
Explanation:
The most important lab safety rule is to follow all safety instructions and guidelines given by your teacher and lab instructions.
By following safety rules, you ensure your own safety as well as the safety of others in the laboratory.
For example, one important safety rule is to never eat or drink in the laboratory and to avoid using laboratory glassware for eating or drinking. This is because table tops and counters could have dangerous substances on them and leftover substances in glassware could interact with future experiments.
Which statement about crystal lattice energy is best supported by the information in the table?
A.The lattice energy increases as cations get smaller, as shown by LiF and KF.
B.The lattice energy increases as the charge of anions increases, as shown by LiF and LiCl.
C.The lattice energy decreases as anions get smaller, as shown by NaCl and NaF.
D.The lattice energy decreases as the charge of cations decreases, as shown by NaF and KF.
Answer:the answer is b
Explanation:got it right on ed
Is NaCi a metal or nonmetal
The effect acids have on most metals is called: dehydration coating corrosion ionization
Is sodium benzoate soluble in NaOH, NaHCO3
Answer:
It's slightly soluble in an aqueous solution of [tex]NaHCO_{3}[/tex], and almost insoluble in an aqueous solution of NaOH.
Explanation:
Sodium benzoate comes from benzoic acid, which is a weak acid. It means that in an aqueous solution benzoic acid does not ionize easily to form the ions [tex]H_{3}O^{+}[/tex] and [tex]C_{7}H_{5}O_{2} ^{-}[/tex]
It also implies, according to the Le Châtelier's principle, that the ion [tex]C_{7}H_{5}O_{2}^{-}[/tex] tends to form the acid [tex]C_{7}H_{6} O_{2}[/tex] more easily. It can be seen in the following equation:
[tex]C_{7}H_{6} O_{2}[/tex] ⇔ [tex]C_{7}H_{5}O_{2}^{-}[/tex] + [tex]H_{3}O^{+}[/tex]
In an aqueous solution, the equilibrium shifts to the left, thus letting water dissolve sodium benzoate. But why? Because water in that case would produce enough [tex]H_{3}O^{+}[/tex] ions to facilitate the disolution of sodium benzoate. It's shown by its solubility in water at 15°C (62.78g/100mL, according to Wikipedia).
In contrast, the presence of NaOH or [tex]NaHCO_{3}[/tex], both chemical species producing the [tex]OH^{-}[/tex] ions in aqueous solution, would make the equilibrium shift to the right because it would be a higher need of [tex]H_{3}O^{+}[/tex] ions to offset the presence of [tex]OH^{-}[/tex].
However, the effect of NaOH is not the same due to [tex]NaHCO_{3}[/tex], because the first is a strong base and the other is a weak one. Thereby it is reasonable to think that solubility of sodium benzoate is greater in water than in [tex]NaHCO_{3}[/tex] and NaOH.
Solubility in water > solubility in [tex]NaHCO_{3}[/tex]> solubility in NaOH.