Normal human body temperature is about 37°C. What is this temperature in kelvins? What is the peak wavelength emitted by a person with this temperature? In what part of the spectrum does this lie?

Answer:

The beat frequency is 2 Hz.

Explanation:

Given that,

Frequency of A = 440 Hz

Frequency of E = 659 Hz

Suppose, piano tuners tune pianos by listening to the beats between the harmonics of two different strings. When properly tuned, the note A should have a frequency of 440 Hz and the note E should be at 659 Hz.

We need to calculate the third harmonic of A

Using formula of harmonic

[tex]f_{3}=n\times f[/tex]

Put the value into the formula

[tex]f_{3} =3\times440[/tex]

[tex]f_{3}=1320\ Hz[/tex]

We need to calculate the second harmonic of E

Using formula of harmonic

[tex]f_{2}=n\times f[/tex]

Put the value into the formula

[tex]f_{2} =2\times659[/tex]

[tex]f_{2}=1318\ Hz[/tex]

We need to calculate the beat frequency

Using formula of beat frequency

[tex]f_{b}=f_{3}-f_{2}[/tex]

Put the value into the formula

[tex]f_{b}=1320-1318[/tex]

[tex]f_{b}=2\ Hz[/tex]

Hence, The beat frequency is 2 Hz.

The beat frequency indicating proper tuning of the E string relative to the A string tuned to 440 Hz should be zero. This corresponds to a situation where the harmonics of both strings match exactly, with the second harmonic of the E string (659.26 Hz) aligning with the third harmonic of the A string (660 Hz), reducing the beat frequency to zero.

To determine the beat frequency that indicates proper tuning for the E string of a guitar, we must consider the fundamental frequencies of the A and E strings. The A string is tuned to 440 Hz. The E string above it should be tuned to a fundamental frequency of 329.63 Hz.

When the A and E strings are played together, harmonics of these frequencies are heard. The second harmonic of the E string would be 2 * 329.63 Hz = 659.26 Hz. This is very close to the 660 Hz, which is the third harmonic of the A string (3 * 440 Hz = 1320 Hz). For the strings to resonate without beats, the harmonics should match as closely as possible. Any difference in these harmonic frequencies would cause beats corresponding to the frequency difference.

Therefore, if the second harmonic of the E string (659.26 Hz) matches the third harmonic of the A string (660 Hz) closely, there will be no beats. In this ideal case, the beat frequency would be 660 Hz - 659.26 Hz = 0.74 Hz. However, for the E string to be perfectly in tune, we would want the beat frequency to be zero, indicating no difference between the expected harmonic frequency and the actual harmonic frequency.

Answer:

The rate at which radar must rotate is 0.335 rad/s.

Explanation:

Given that,

Velocity = 65 m/h = 29.0576 m/s

Angle = 15°

Suppose, the radius given by

[tex]r=(100\cos2\theta)\ m[/tex]

We need to calculate the rate at which radar must rotate

Using formula of linear velocity

[tex]v=r\omega[/tex]

[tex]\omega=\dfrac{v}{r}[/tex]

Where, v = velocity

r = radius

Put the value into the formula

[tex]\omega=\dfrac{29.0576}{100\cos30}[/tex]

[tex]\omega=0.335\ rad/s[/tex]

Hence, The rate at which radar must rotate is 0.335 rad/s.

Answer:

130.165636364°C

Explanation:

P = Pressure

V = Volume

n = Number of moles

R = Gas constant = 0.082 L atm/mol K

From ideal gas law we have

[tex]PV=nRT\\\Rightarrow n=\dfrac{PV}{RT}\\\Rightarrow n=\dfrac{22\times 25}{0.082\times (25+273.15)}\\\Rightarrow n=22.496451696\ moles[/tex]

[tex]PV=nRT\\\Rightarrow T=\dfrac{PV}{nR}\\\Rightarrow T=\dfrac{48\times 15.5}{22.496451696\times 0.082}\\\Rightarrow T=403.315636364\ K[/tex]

The initial temperature is [tex]403.315636364-273.15=130.165636364\ ^{\circ}C[/tex]

Answer: 130 degrees Celsius

Explanation:

P1V1 / T1 = P2V2 / T2

Let the subscript 1 represent the initial 15.5L of gas and the subscript 2 represent the gas at the final volume of 25L. Rewrite the temperature in Kelvin by adding 273.

P1=48atm, V1=15.5L, P2=22atm, V2=25L, T2=298K, and T1 is unknown.

Substitute the known values into the combined gas law equation.

P1V1 / T1=P2V2 / T2 → (48atm)(15.5L) / T1 = (22atm)(25L) / 298K

Solve the equation for T1, simplify, and round to the nearest degree.

T1 = P1V1T2 / P2V2

T1 = (48atm)(15.5L)(298K)(22atm)(25L)

T1 = 403K

To get the temperature in Celsius, subtract 273.

T1 = 130∘C

From the work theorem, this is defined as the amount of force applied on an object displaced on a longitudinal unit. Mathematically this is

[tex]W = \vec{F} \times \vec{d}[/tex]

Here,

F = Force vector

d = Displacement vector

Of all the options presented, only in the last one there is no change in distance, so the work done there is zero.

The correct option is 5.

Work in Physics is when a force causes displacement. Of the choices, the example of a runner stretching by pushing against a wall does not involve work, as there is no displacement.

In the context of Physics, 'work' is defined as a force causing displacement on an object. Essentially, work is done when a force acts upon an object to cause or prevent motion. Among the options provided, 5. A runner stretches by pushing against a wall does not involve 'work'. This is because, despite the runner exerting a force against the wall, there is no displacement of the wall in response to this force.

Work (W) is calculated by multiplying the force (F) that is applied to an object and the distance (d) that the object is moved, i.e., W = F * d. In this case, since the displacement (d) is zero, the work done is also zero.

https://brainly.com/question/34765290

#SPJ11

Answer:

0.43 s

Explanation:

We have the following parameters:

Initial velocity, u = 7.4 m/s

Acceleration of gravity, g = 9.8 [tex]m/s^2[/tex]

Distance, s = 43 in + 10 ft = 1.092 m + 3.048 m = 4.14 m

Time, t = ?

Using the equation of motion [tex]s=ut +\frac{1}{2}gt^2[/tex], we have

[tex]4.14 = 7.4t + 0.5\times9.8t^2[/tex]

[tex]4.9t^2 + 7.4t - 4.14 =0[/tex]

Using the quadratic formula [tex]\dfrac{-b\pm\sqrt{b^2-4ac}}{2a}[/tex] where a = 4.9, b = 7.4 and c = - 4.14, and solving for the positive value of t only, we have

[tex]t = 0.43[/tex] s

Answer:

The mass of the asteroids is 0.000334896182184 times the mass of the Earth.

39929.4542466 m

Explanation:

Total mass of the asteroids

[tex]m_a20000\times 10^{17}=2\times 10^{21}\ kg[/tex]

[tex]m_e[/tex] = Mass of Earth = [tex]5.972\times 10^{24}\ kg[/tex]

The ratio is

[tex]\dfrac{m_a}{m_e}=\dfrac{2\times 10^{21}}{5.972\times 10^{24}}\\\Rightarrow \dfrac{m_a}{m_e}=0.000334896182184[/tex]

The mass of the asteroids is 0.000334896182184 times the mass of the Earth.

Volume is given by

[tex]V=\dfrac{m}{\rho}\\\Rightarrow \dfrac{4\pi}{3\times 8} d^3=\dfrac{m}{\rho}\\\Rightarrow d^3=\dfrac{3\times 8}{4\pi}\dfrac{m}{\rho}\\\Rightarrow d=(\dfrac{3\times 8}{4\pi}\dfrac{m}{\rho})^{\dfrac{1}{3}}\\\Rightarrow d=(\dfrac{3\times 8}{4\pi}\dfrac{10^{17}}{3000})^{\dfrac{1}{3}}\\\Rightarrow d=39929.4542466\ m[/tex]

The diameter is 39929.4542466 m

Answer:

a. 1.174 rad[/tex] or 67.3 degree

b. t = 49.28 s

Explanation:

Let [tex]v_v[/tex] be the vertical component of the boat velocity with respect the the river, pointing North. Let [tex]v_h[/tex] be the horizontal component of the boat velocity with respect to the river, pointing West, aka upstream. Since the total velocity of the boat is 4.4m/s

[tex]v_v^2 + v_h^2 = 4.4^2 = 19.36[/tex]

The time it takes for the boat to cross 200m-wide river at [tex]v_v[/tex] rate is

[tex]t = 200 / v_v[/tex] or [tex]v_v = 200 / t[/tex]

This is also the time it takes for the boat to travel 35m upstream, horizontally, at the rate of [tex] v_h - 0.99[/tex] m/s

[tex]t = \frac{35}{v_h - 0.99}[/tex]

[tex]v_h - 0.99 = 35/t[/tex]

[tex]v_h = 35/t + 0.99[/tex]

We can substitute [tex]v_v,v_h[/tex] into the total velocity equation to solve for t

[tex]\frac{200^2}{t^2} + (\frac{35}{t} + 0.99)^2 = 19.36[/tex]

[tex]\frac{40000}{t^2} + \frac{35^2}{t^2} + 2*0.99*\frac{35}{t} + 0.99^2 = 19.36[/tex]

From here we can multiply both sides by [tex]t^2[/tex]

[tex]40000 + 1225 + 69.3t + 0.9801t^2 = 19.36t^2[/tex]

[tex]18.38 t^2 - 69.3t - 41225 = 0[/tex]

[tex]t= \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}[/tex]

[tex]t= \frac{69.3\pm \sqrt{(-69.3)^2 - 4*(18.3799)*(-41225)}}{2*(18.38)}[/tex]

[tex]t= \frac{69.3\pm1742.31}{36.7598}[/tex]

t = 49.28 or t = -45.51

Since t can only be positive we will pick t = 49.28

[tex]v_h = 35 / t + 0.99 = 35 / 49.38 + 0.99 = 1.7 m/s[/tex]

The angle, relative to the flow of river direction is

[tex]cos(\alpha) = \frac{v_h}{v} = \frac{1.7}{4.4} = 0.3864[/tex]

[tex]\alpha = cos^{-1}(0.3864) = 1.174 rad[/tex] or 67.3 degree

Answer:

a) [tex]\Delta s=5\ m[/tex] is the distance between deer and the vehicle

b) [tex]u'=22.36\ m.s^{-1}[/tex] is the maximum speed the driver can be at and still not hit the deer.

Explanation:

Given:

a)

Now the distance travelled after application of the brakes till the vehicle stops:

[tex]v^2=u^2+2a_m.s[/tex]

(assuming that the brakes are applied with maximum acceleration)

where:

[tex]s=[/tex] displacement of the vehicle after braking till it stops

[tex]v=[/tex] final velocity of the vehicle = 0 (stops)

putting the values:

[tex]0^2=20^2-2\times 10\times s[/tex]

[tex]s=20\ m[/tex]

Now before the application of the brakes 0.5 second is taken to react and the vehicle travels during this time as well.

So, distance covered before applying the brakes:

[tex]s'=u.t'[/tex]

[tex]s'=20\times 0.5[/tex]

[tex]s'=10\ m[/tex]

The distance between the deer and the vehicle:

[tex]\Delta s=x-(s+s')[/tex]

[tex]\Delta s=35-(20+10)[/tex]

[tex]\Delta s=5\ m[/tex]

b)

The maximum speed the driver can have with the vehicle and still not hit the deer is given as:

[tex]v^2=u'^2+2. a_m.(x-s')[/tex]

because s' is the distance covered before braking during the reaction time.

[tex]0^2=u'^2-2\times 10\times (35-10)[/tex]

[tex]u'=22.36\ m.s^{-1}[/tex] is the maximum speed the driver can be at and still not hit the deer.

Using the equations of motion under constant acceleration, a) the distance between the driver and the deer when the car comes to a stop is 5 m and b) the maximum speed the driver could have and still not hit the deer is approximately 23.45 m/s.

The subject of the question, Problem-Solving Strategy 2.1 Motion with constant acceleration, involves using the equations of motion under constant acceleration. Let's break down the problem into two parts:

https://brainly.com/question/25307462

#SPJ3

Answer:

(a). differential relation becomes dρ/ρ = -τρV2 dV/V

(b). fraction change in density; dρ/ρ = -8.7 ˣ 10⁻⁶

(c).  dρ/ρ = -8.7 ˣ 10⁻²

Explanation:

Let us begin,

(a).  given from the question we have that dp = -ρVdV

where dρ = ρ τ dp, i.e.

dp = dρ/ρτ ...............(1)

replacing value of dp we have,

-ρVdV = dρ/ρτ

so that dρ = -τp2 VdV

finally, dρ/ρ = -τp V2 dV/V

(b). from the question here, we were given Velocity to be = 10 m/s

density (ρ) =  1.23 kg/m3

pressure (p) =  1.01 x 10⁵ N/m2

from formula,

dρ/ρ = τs ρ V2 dV/V .............(2)

but τs = 1/γp = 1/(1.4× 1.01×10⁵) = 7.07 ˣ 10⁻⁶ m²/N

substituting value of τs  into equation (2) we have

dρ/ρ = τs ρ V2 dV/V =  (7.07 ˣ 10⁻⁶) ˣ (1.23) ˣ (10ˣ2) (0.01) = -8.7 ˣ 10⁻⁶

dρ/ρ = -8.7 ˣ 10⁻⁶

(c). from we question we know that dρ/ρ has a large ratio of (1000/10)²

so dρ/ρ = -8.7 ˣ 10⁻⁶ × (1000/10)² = -8.7 ˣ 10⁻²

dρ/ρ = -8.7 ˣ 10⁻².

comparing this result with part (b). we can see that when we increase the velocity of a factor 100, there is an increased factorial change in the density by a factor 104.

Answer:

[tex]-70\hat{i} m+19\hat{j}m+21\hat{k} m[/tex]

Explanation:

We are given that

Displacement along x- axis =-[tex]70\hat{i}[/tex] m

Displacement along y-axis=[tex]19\hat{j}[/tex]m

Displacement along z-axis=[tex]21\hat{k} m[/tex]

Where [tex]\hat{i},\hat{j},\hat{k}[/tex] are unit vector along x, y and z-axis

We have to find the displacement from start to end in unit vector notation.

Total displacement from start to end=Displacement along x-axis+displacement along y-axis+displacement along z- axis

Total displacement from start to end=[tex]-70\hat{i} m+19\hat{j}m+21\hat{k} m[/tex]

Hence, the displacement of the sign from start to end=[tex]-70\hat{i} m+19\hat{j}m+21\hat{k} m[/tex]

Complete question:

A parallel-plate capacitor has plates with an area of 405 cm² and an air-filled gap between the plates that is 2.25 mm thick. The capacitor is charged by a battery to 575 V and then is disconnected from the battery.   (a) How much energy is stored in the capacitor? (b) The separation between the plates is now increased to 4.50 mm.   How much energy is stored in the capacitor now?

Answer:

The energy stored in the capacitor when the plates is increased to 4.50 mm is 1.32 X 10⁻⁵ J

Explanation:

Given:

Area of the plates = 405 cm² = 405 X (10⁻²)² m²= 405 X 10⁻⁴m² = 0.0405m²

Energy stored in a capacitor = CV²/2

Where;

V is the voltage across the plates = 575 V

C is the capacitor =?

C = Kε(A/d)

K is constant = 1.0

ε is permittivity of free space = 8.885 X 10⁻¹²

d is the diameter of the two plates = 2.25 mm = 0.00225m

C = 1.0 x 8.885 X 10⁻¹² x (0.0405/0.00225)

C = 1.5993 X 10⁻¹⁰ F

(a) Energy stored in a capacitor = 0.5 X 1.5993 X 10⁻⁹ X 575²

= 2.64 X 10⁻⁵ J

(b) The separation between the plates is now increased to 4.50 mm.

C = Kε(A/d)

New diameter, d = 4.5 mm = 0.0045 m

C = 1.0 x 8.885 X 10⁻¹² x (0.0405/0.0045)

C = 7.9965 X 10 ⁻¹¹ F

Energy stored in a capacitor = 0.5 X 7.9965 X 10 ⁻¹¹ X  575²

= 1.32 X 10⁻⁵ J

Therefore, the energy stored in the capacitor when the plates is increased to 4.50 mm is 1.32 X 10⁻⁵ J

Final answer:

The distance from the train station where the car catches up with the train is 250 miles.

Explanation:

To find the distance from the train station where the car catches up with the train, we need to determine the time it takes for the car to catch up.

Let's assume the car catches up with the train after t hours. Since the train leaves 2 hours before the car, the train has already been traveling for t + 2 hours.

Distance traveled by the train = speed of the train × time = 50t + 100 miles

Distance traveled by the car = speed of the car × time = 70t miles

Since the car catches up with the train, the distances traveled by both must be equal. Equating the distances, we get:

50t + 100 = 70t

20t = 100

t = 5

Now, substitute the value of t back into one of the distance formulas to find the distance from the train station:

Distance from the train station = speed of the train × time = 50 × 5 = 250 miles

Final answer:

The car catches up with the train in 5 hours, and they are 350 miles from the station when the car catches up.

Explanation:

The problem you presented is related to finding when two objects, moving at different constant speeds, meet. To solve this, we use the concept of relative speed.

The train travels for 2 hours before the car starts, so by that time, the train would have covered a distance of (50 mi/hr × 2 hr) = 100 miles. When the car starts, it has to cover not only the distance to the train but also the additional distance the train covers as the car approaches.

Let's consider the time it takes for the car to catch up with the train to be 't' hours. In that time, the car would travel 70t miles, and the train would travel an additional 50t miles.

Since the car needs to cover the initial 100 miles plus whatever distance the train covers in 't' hours, we can set up the equation:

70t = 100 + 50t

Subtracting 50t from both sides gives us:

20t = 100

Dividing both sides by 20:

t = 5

So, the car catches up with the train in 5 hours. To find out how far from the station they are when the car catches up with the train:

x = 70 mi/hr × 5 hr = 350 miles

To solve this problem we will make a diagram in the Cartesian plane that will allow us to find and understand more accurately the displacement and the angle of rotation.

According to Pythagoras, the distance traveled would be equivalent to

[tex]d = \sqrt{(2.7)^2+(3.5)^2}[/tex]

[tex]d = 4.4 miles[/tex]

The individual had a displacement of 4.4 thousand from the starting point.

Now the angle [tex]\theta[/tex] plus the previously given angle will allow us to find the direction of travel.

[tex]tan\theta = \frac{\text{Opposite side}}{\text{Adjacent side}}[/tex]

[tex]tan\theta = \frac{3.5}{2.7}[/tex]

[tex]\theta = tan^{-1} (\frac{3.5}{2.7})[/tex]

[tex]\theta = 52.35\°[/tex]

[tex]\angle =[/tex] [tex]\theta + 35 = 52.35+35 = 87.35\°[/tex]

Therefore the net direction of the man is S 87.35° W

To find the distance from the line where the electric field strength is 2000 N/C, we can use the formula for the electric field of an infinitely long charged wire. The distance from the line where the electric field strength is 2000N/C is d = lambda / 2 x 10^6 m.

To find the distance from the line where the electric field strength is 2000 N/C, we can use the formula for the electric field of an infinitely long charged wire:

E = k * (lambda / d)

Where E is the electric field strength, k is the Coulomb's constant, lambda is the charge density of the wire, and d is the distance from the wire. In this case, since the line of charge is infinite, the charge density is simply the charge per unit length.

To solve for the distance d, we can rearrange the formula: d = k * (lambda / E)

Plugging in the given values, the distance d is:

d = (9.0 x 10^9 Nm^2/C^2) * (lambda / 2000 N/C)

So, the distance from the line where the electric field strength is 2000 N/C is d = lambda / 2 x 10^6 m.

https://brainly.com/question/8971780

#SPJ12

Answer:

The net work produced is 30.37 KJ

The efficiency of cycle is 72.3%

Explanation:

For the net work produced, we have the formula:

Work = (Th - Tc)(Sh - Sc)(M)

Where,

Th = higher temperature = 800° C + 273 = 1073 k

Tc = lower temperature = 25° C + 273 = 298 k

Sh = specific entropy at higher temperature

Sc = specific entropy at lower temperature

M = molar mass of air

Using, ideal gas table to find entropy. The table is attached.

therefore,

Work = (1073 k - 298 k)(3.0485235 KJ/kg.k - 1.69528 KJ/kg.k)(0.02896 kg)

Work = (775 k)(1.3532435 KJ/kg.k)(0.02896 kg)

Work = 30.37 KJ

Now, for the efficiency (n), we have a formula:

n = 1 - Tc/Th

n = 1 - (298 k)/(1073 k)

n = 0.723 = 72.3 %

Explanation:

It is known that inside a sphere with uniform volume charge density the field will be radial and has a magnitude E that can be expressed as follows.

           E = [tex]\frac{q}{4 \p \epsilon_{o}R^{3}}r[/tex]

    V = [tex]-\int_{0}^{r}E. dr[/tex]

        = [tex]-\int_{0}^{r}\frac{q}{4 \p \epsilon_{o}R^{3}}r dr[/tex]

        = [tex](\frac{q}{4 \p \epsilon_{o}R^{3}})(\frac{r^{2}}{2})[/tex]

        = [tex]\frac{-qr^{2}}{8 \pi \epsilon_{o}R^{3}}[/tex]

At r = 1.45 cm = [tex]1.45 \times 10^{-2}[/tex]  (as 1 m = 100 cm)

     V = [tex]\frac{2.50 \times 10^{-15} \times 1.45 \times 10^{-2}}{8 \times 3.1416 \times 8.85 \times 10^{-12} \times 2.36 \times 10^{-2}}[/tex]

         = [tex]6.905 \times 10^{-6}[/tex] mV

Thus, we can conclude that value of V at radial distance r = 1.45 cm is  [tex]6.905 \times 10^{-6}[/tex] mV.

Explanation:

A.

Displacement,S; Θ = S/r

= 180/360 * 2π * 3500

= 10995.6 m

Θ = 10995.6/3500

= 3.142

B.

Angular speed,w = Θ/t

= 3.142/1.503102

= 2.09 rad/s

Velocity = w * r

= 2.09 × 3500

= 7315 m/s.

C.

The same as B.

The airplane's Motion in a Circle displacement is 7.0km, its average velocity is 0.0467 km/s, and its average speed is 0.0737 km/s.

The airplane is flying half a circle, which is essentially semi-circular motion. Under this condition, we can calculate the values asked in the question as follows:

(a) Displacement: Displacement is a vector quantity and represents the shortest distance between the initial and the final points of an object's path. But since the airplane is rounding half the circle, the displacement is essentially the diameter of the circular path. The diameter will be two times the radius, therefore 2*3.50km = 7.00 km.

(b) Average velocity: Average velocity is the total displacement divided by the total time. So, the average velocity would be 7.00km / (1.50*10^2) s = 0.0467 km/s.

(c) Average speed: Average speed is defined as the total distance traveled by the object divided by the total time taken. Here, the airplane travels half the circumference of the circle in the given time. The formula for the circumference of a circle is 2*pi*r, so half the circle's circumference will be pi*3.50 km. Then, Average speed = (pi*3.50 km) / (1.50*10^2) s = 0.0737 km/s.

For more such questions on Motion in a Circle, click on:

https://brainly.com/question/36406168

#SPJ3

Answer:

The distinction can be understood by their individual definitions given below.

Explanation:

A meteoroid is a small rocky/metallic body that can be found in outer space (space beyond the Earth's atmosphere). Their sizes are much smaller than asteroids (often called planetoids) and even more smaller than that of any planets or their moons. They generally originate from comets, asteroids (fragments of them) and even from planets or moons when there occurs heavy collisions.

A meteor is basically what we know to be "shooting stars". When a meteoroid, asteroid, etc. passes through the Earth's atmosphere, they heat up and begin to glow because of the frictional force experienced due to gas molecules in the atmosphere. But the important thing is that they do not reach the surface of the Earth as they completely burn out long before coming close. If some object does manage to reach the Earth's surface, we then call it a meteorite.

(These definitions are not restricted to the Earth but applies to all panets and moons.)

(Also check the gif provided here: https://en.wikipedia.org/wiki/Meteoroid)

To solve this problem we will apply the concept related to the Poisson ratio for which the longitudinal strains are related, versus the transversal strains.  First we need to calculate the longitudinal strain as follows

[tex]\epsilon_x = \frac{l_f-l_i}{l_i}[/tex]

[tex]\epsilon_x = \frac{(9.80554)-(9.8)}{9.8}[/tex]

[tex]\epsilon_x = 0.0005653[/tex]

Second we will calculate the lateral strain as follows

[tex]\epsilon_y = \frac{a_f-a_i}{a_i}[/tex]

[tex]\epsilon_y = \frac{2.59952-2.6}{2.6}[/tex]

[tex]\epsilon_y = -0.0001846153[/tex]

The Poisson's ratio is the relation between the two previous strain, then,

[tex]\upsilon = -\frac{\epsilon_y}{\epsilon_x}[/tex]

[tex]\upsilon = -\frac{(-0.0001846153)}{0.0005653}[/tex]

[tex]\upsilon = 0.3265[/tex]

Therefore the Poisson's ratio for the material is 0.3265

Answer:

(a) [tex]t=\frac{H}{v_0}[/tex]

(b) [tex]H=\frac{v_0^2}{g}[/tex]

Explanation:

Let the two balls collide at a height x from the ground. Therefore, ball 2 travels a distance of (H-x) before colliding with ball 1.

Using the following Newton's law of motion,

[tex]S=ut+\frac{1}{2}at^2[/tex]

where,

[tex]S[/tex] = displacement

[tex]u[/tex] = initial velocity

[tex]a[/tex] = acceleration

[tex]t[/tex] = time

we can write the equations of motion of the two balls(ball 1 and ball 2 respectively):

[tex]x=v_0t-\frac{1}{2}gt^2[/tex]     ......(1)   ([tex]a=-g[/tex], ball is moving against gravity)

[tex]H-x=\frac{1}{2} gt^2[/tex]      .......(2)    (initial velocity is zero; [tex]a=+g[/tex])

Substituting [tex]x[/tex] from equation (1) in (2),

[tex]H-v_0t+\frac{1}{2}gt^2=\frac{1}{2}gt^2[/tex]

or, [tex]t=\frac{H}{v_0}[/tex]      ......(a)

(b) Now, it is said that the collision will occur when ball 1 is at it's highest point. That is, it's final velocity must be zero.

This time we shall have to use another equation of motion given by,

[tex]v^2=u^2+2aS[/tex]

where, [tex]v[/tex] = final velocity

therefore, we get for ball 1,

[tex]0=v_0^2-2gx[/tex]       ([tex]u=v_0,v=0,a=-g[/tex])

or, [tex]x=\frac{v_0^2}{2g}[/tex]

Putting the value of [tex]x[/tex] in equation (2) and rearranging, we get,

[tex]\frac{g}{2v_0^2}H^2-H+\frac{v_0^2}{2g}=0[/tex]

which is a quadratic equation, whose solution is given by,

[tex]H=\frac{+1\pm\sqrt{(-1)^2-(4\times\frac{g}{2v_0^2} \times\frac{v_0^2}{2g}) } }{2\times\frac{g}{2v_0^2} }[/tex]

[tex]=\frac{v_0^2}{g}[/tex]

(a) The time at which the balls collide is H/[tex]v_{0}[/tex]

(b) The height H is equal to [tex]\frac{v_{0} ^{2} }{g}[/tex]

Let the balls collide at a height x above the ground.

Then the distance traveled by the ball thrown above is x.

And the distance traveled by the ball dropped from height H is (H-x).

(i) Both the balls will take the same time to travel respective distances in order to collide.

[tex]H-x=\frac{1}{2}gt^{2}[/tex]

[tex]x = v_{0}t - \frac{1}{2}gt^{2}[/tex]

We get:

[tex]x=v_{0}t-(H-x)[/tex]

[tex]t=\frac{H}{v_{0}}[/tex] , is the time after which the balls collide.

(ii) Let the ball thrown up attains its maximum height x at the time of thecollision

[tex]v^{2} = u^{2}-2gx[/tex] here v is the final velocity which is 0 when the ball attains maximum height

[tex]0=v_{0} ^{2}-2gx[/tex]

[tex]x=\frac{v_{0} ^{2} }{2g}[/tex] is the maximum height attained.

Now, the ball thrown downward travels distance (H-x) just before collision:

[tex]H-x=\frac{1}{2}gt^{2}[/tex]

[tex]H-\frac{v_{0} ^{2} }{2g}=\frac{1}{2}g\frac{H^{2} }{v_{0} ^{2} }[/tex]

Solving the quadratic equation we get:

[tex]H=\frac{v_{0} ^{2} }{g}[/tex]

Learn more about equations of motion:

https://brainly.com/question/20594939

Answer: Height of building = 17.69m, velocity of brick = 18.6m/s

Explanation: From the question, the body has a zero initial speed, thus initial velocity (u) all through the motion is zero.

By ignoring air resistance makes it a free fall motion thus making it to accelerate constantly with a value of [tex]a = 9.8m/s^{2}[/tex].

Time taken to fall = 1.90s

a)

thus the height of the building is calculated using the formulae below

[tex]H = ut + \frac{1}{2} gt^{2}[/tex]

but u = 0 , hence

[tex]H = \frac{1}{2} gt^{2}[/tex]

[tex]H = \frac{1}{2} *9.8* 1.9^{2} \\\\H = 17.69m[/tex]

b)

to get the value of velocity (v) as the brick hits the ground, we use the formulae below

[tex]v^{2} = u^{2} + 2aH[/tex]

but u= 0, hence

[tex]v^{2} = 2gH\\[/tex]

[tex]v^{2} = 2 * 9.8 * 17.69\\v = \sqrt{2 *9.8* 17.69} \\v = 18.62m/s[/tex]

find the attachment in this answer for the accleration- time graph, velocity- time graph and distance time graph

a. The height of building, in meters, is equal to 17.69 meters.

b. The magnitude of the brick’s velocity just before it reaches the ground is equal to 18.72 m/s.

Given the following data:

We know that acceleration due to gravity (a) for an object in free fall is equal to 9.8 meter per seconds square.

a. To determine the height of building, in meters, we would use the second equation of motion:

Mathematically, the second equation of motion is given by the formula;

[tex]S = ut + \frac{1}{2} at^2[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]S = 0(1.90) + \frac{1}{2} \times 9.8 \times 1.90^2\\\\S = 0 + 4.9 \times 3.61[/tex]

Distance, S = 17.69 meters.

b. To determine the magnitude of the brick’s velocity just before it reaches the ground, we would use the third equation of motion;

[tex]V^2 = U^2 + 2aS[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]V^2 = 0^2 + 2 \times 9.8 \times 17.69\\\\V^2 = 350.26\\\\V = \sqrt{350.26}[/tex]

V = 18.72 m/s

Read more: https://brainly.com/question/8898885

Answer:

a = (m₂-m₁) / (m₂ + m₁ + ½ m)

a = (m₂-m₁) / (m₂ + m₁ + 1)

Explanation:

An Atwood machine consists of two masses of different m1 and m2 value that pass through a pulley, in this case with mass. Let's use Newton's second law for this problem.

Assume that m₂> m₁, so the direction of descent of m₂ is positive, this implies that the direction of ascent of m₁ is positive

Equation of the side of m₁

              T₁ - W₁ = m₁ a

Equation of the side of m₂

              W₂ - T₁ = m₂ a

Mass pulley equation m; by convention the counterclockwise rotation is positive

              τ = I α

              T₁ R - T₂ R = I (-α)

The moment of inertia of a disk is

              I = ½ m R²

Angular and linear acceleration are related

             a = α R

             α = a / R

The rotation is clockwise, so it is negative

We replace

             (T₁ –T₂) R = ½ m R² (-a / R)

             T₁ -T₂ = - ½ m a

Let's write our three equations together

              T₁ - m₁ g = m₁ a

              m₂ g - T₂ = m₂ a

              T₁ –T₂ = -½ m a

Let's multiply the last equation by (-1) and add

               m₂ g - m₁ g = m₂ a + m₁ a + ½ m a

                a = (m₂-m₁) / (m₂ + m₁ + ½ m)

calculate

               a = (m₂ - m₁)/ (m₁ +m₂ + 1)

Based on the calculations, the acceleration of this system is equal to 0.58 [tex]m/s^2[/tex].

Given the following data:

First of all, we would determine the moment of inertia of this disk by using this formula:

[tex]I=\frac{1}{2} mr^2\\\\I=\frac{1}{2} \times 2 \times (0.248)^2\\\\I=0.0615\;Kgm^2[/tex]

Next, we would use a free body diagram to determine the tensional forces acting on the disk by applying Newton's Second Law of Motion as follows:

For the first force:

[tex]F_1g-F_{T1}=m_1a\\\\m_1g-F_{T1}=m_1a\\\\1.61(9.8)-F_{T1}=1.61a\\\\15.8-F_{T1}=1.61a\\\\F_{T1}=15.8-1.61a[/tex]

For the second force:

[tex]F_{T2}-F_2g=m_2a\\\\F_{T2}-m_2g=m_2a\\\\F_{T2}-1.38(9.8)=1.38a\\\\F_{T2}-13.5=1.38a\\\\F_{T2}=13.5+1.38a[/tex]

For the torque, we have:

[tex]\sum T =I\alpha \\\\F_{T1}r-F_{T2}r=I\alpha\\\\(F_{T1}-F_{T2})r=I\alpha\\\\(15.8-1.61a-[13.5+1.38a])0.248=0.0615 \times \frac{a}{0.248} \\\\(15.8-1.61a-13.5-1.38a)0.248=0.0615 \times \frac{a}{0.248} \\\\(2.3-2.99a)0.248=0.0615 \times \frac{a}{0.248}\\\\0.5704-0.7415a=\frac{0.0615a}{0.248}\\\\0.1415-0.1839a=0.0615a\\\\0.1839a+0.0615a=0.1415\\\\0.2454a=0.1415\\\\a=\frac{0.1415}{0.2454}[/tex]

Acceleration, a = 0.58 [tex]m/s^2[/tex]

Read more on acceleration here: brainly.com/question/24728358

Answer:

0 MN/C, 2.697 MV

4.1953 MN/C, 1.2586 MV

19.2642857143 MN/C, 2.697 MV

Explanation:

k = Coulomb constant = [tex]8.99\times 10^{9}\ Nm^2/C^2[/tex]

Electric field at r = 8 cm

E = 0 (inside)

Electric potential is given by

[tex]V=\dfrac{kq}{R}\\\Rightarrow V=\dfrac{8.99\times 10^{9}\times 42\times 10^{-6}}{0.14}\\\Rightarrow V=2697000\ V=2.697\ MV[/tex]

Electric potential is 2.697 MV

r = 30 cm

[tex]E=\dfrac{kq}{r^2}\\\Rightarrow E=\dfrac{8.99\times 10^{9}\times 42\times 10^{-6}}{0.3^2}\\\Rightarrow E=4195333.33\ MN/C=4.1953\ MN/C[/tex]

Electric field is 4.1953 MN/C

[tex]V=\dfrac{kq}{r}\\\Rightarrow V=\dfrac{8.99\times 10^{9}\times 42\times 10^{-6}}{0.3}\\\Rightarrow V=1258600\ V=1.2586\ MV[/tex]

Electric potential is 1.2586 MV

r = R = 14 cm

[tex]E=\dfrac{kq}{r^2}\\\Rightarrow E=\dfrac{8.99\times 10^{9}\times 42\times 10^{-6}}{0.14^2}\\\Rightarrow E=19264285.7143\ N/C=19.2642857143\ MN/C[/tex]

The electric field is 19.2642857143 MN/C

[tex]V=\dfrac{kq}{r}\\\Rightarrow V=\dfrac{8.99\times 10^{9}\times 42\times 10^{-6}}{0.14}\\\Rightarrow V=2697000\ V=2.697\ MV[/tex]

The potential is 2.697 MV

To calculate the electric field and electric potential at different distances from the center of a spherical conductor, use the equations for electric field and electric potential due to a point charge. At a distance of 8.0 cm, the electric field is 7.87 * 10^3 N/C and the electric potential is 5.25 kV. At a distance of 30.0 cm, the electric field is 1.26 * 10^3 N/C, but the electric potential cannot be calculated without a reference point. At 14.0 cm, the electric field and electric potential are zero.

To calculate the electric field and electric potential at different distances from the center of a spherical conductor with a radius of 14.0 cm and a charge of 42.0 µC, we can use the equations for electric field and electric potential due to a point charge.

(a) At a distance of 8.0 cm from the center, the magnitude of the electric field can be calculated using the equation:

E = k * (Q/r²)

Substituting the given values, we get:

E = (9 * 10^9 Nm²/C²) * (42 * 10^-6 C) / (0.08 m)² = 7.87 * 10^3 N/C

To calculate the electric potential at this distance, we can use the equation:

V = k * (Q/r)

Substituting the given values, we get:

V = (9 * 10^9 Nm²/C²) * (42 * 10^-6 C) / (0.08 m) = 5.25 kV

(b) At a distance of 30.0 cm from the center, the magnitude of the electric field can be calculated in the same way:

E = (9 * 10^9 Nm²/C²) * (42 * 10^-6 C) / (0.3 m)² = 1.26 * 10^3 N/C

But the electric potential at this distance cannot be calculated using the given information, as we need the reference point for potential measurement.

(c) At a distance of 14.0 cm (the radius of the conductor) from the center, the electric field and electric potential are zero, as the conductor is in electrostatic equilibrium.

https://brainly.com/question/34973156

#SPJ6

Answer:

Explanation:

Given

Cannon is fired with a velocity of [tex]u=72.50\ m/s[/tex]

Using Equation of motion

[tex]y=ut+\frac{1}{2}at^2[/tex]

where

[tex]y=displacement[/tex]

[tex]u=initial\ velocity[/tex]

[tex]a=acceleration[/tex]

[tex]t=time[/tex]

after time [tex]t=3.3 s[/tex]

[tex]y=72.50\times 3.3-\frac{1}{2}\times 9.8\times (3.3)^2[/tex]

[tex]y=239.25-53.36[/tex]

[tex]y=185.89\ m[/tex]

So after 3.3 s cannon ball is at a height of 185.89 m

Answer:

Mass of the silver will be equal to 46.70 gram

Explanation:

We have given heat required to raise the temperature of silver by 24°C is 269 J , so [tex]\Delta T=24^{\circ}C[/tex]

Specific heat of silver = 0.240 J/gram°C

We have to find the mass of silver

We know that heat required is given by

[tex]Q=mc\Delta T[/tex], here m is mass, c is specific heat of silver and [tex]\Delta T[/tex] is rise in temperature

So [tex]269=m\times 0.240\times 24[/tex]

m = 46.70 gram

So mass of the silver will be equal to 46.70 gram

Answer:

0.906

Explanation:

Let g = 9.81 m/s2. We can calculate the rate of change in potential energy when m = 201kg of water is falling down a distance of h = 131m per second

[tex]\dot{E_p} = \dot{m}gh = 201*9.81*131 = 258307 J/s (W) = 258.307 kW[/tex]

So the efficiency of the water turbine is the ratio of output power over input power:

[tex]\frac{234}{258.307} = 0.906[/tex]

This question involves the concepts of efficiency and potential energy.

The efficiency of the turbine is "90.6%".

The efficiency of the turbine can be given by the following formula:

[tex]Efficiency = \frac{Turbine\ shaft\ power}{Potential\ Energy\ power\ of\ Water}\\\\[/tex]

where,

Turbine shaft power = 234 KW

Potential energy power of water = mgh/t = (201 kg/s)(9.81 m/s²)(131 m)

Potential energy power of water = 258307.11 W = 258.31 KW

Therefore,

[tex]Efficiency=\frac{234\ KW}{258.31\ KW}[/tex]

Efficiency = 0.906 = 90.6%

Learn more about efficiency here:

https://brainly.com/question/5035443?referrer=searchResults

Answer

given,

length of tube = 120 cm

a) Open at both ends.

distance between two successive nodes or anti nodes = λ/2

for first possibility =  λ/2 = 120

                          λ  =2 x 120 = 240 cm

for second Possibility, distance between two node or antinode acting symmetrically

                       λ = 120 cm

for three nodes in the tube, distance between them is equal to

[tex]\dfrac{3}{2}\lambda = 120[/tex]

[tex]\lambda = 80 cm[/tex]

b) Open at one end

 First possibility, The distance between one node or anti node

  [tex]\dfrac{\lambda}{4} = 120[/tex]

             λ = 480 cm

 Second Possibility, distance between two node or anti node is equal to

[tex]\dfrac{3}{4}\lambda = 120[/tex]

    λ = 160 cm

Third possibility, distance between three nodes and three anti nodes is equal to

[tex]\dfrac{5}{4}\lambda = 120[/tex]

   λ = 100 cm

Answer:

0.212V

Explanation:

The induced emf in circular loop is [tex]\epsilon=-d\frac{\phi_B}{dt}=-NA\frac{dB}{dt}[/tex]

N = Number of loops = 15

A = Cross sectional Area = [tex]\pi[/tex][tex]0.03^{2}[/tex] = 0.0009[tex]\pi[/tex]

dB = change in magnetic Field = 0-0.5 = -0.5

dt = time taken = 0.1sec

[tex]\epsilon=-15*0.0009\pi *\frac{-0.5}{0.1}[/tex] = 0.212V

Answer:

[tex]\theta=119.8138^{\circ}[/tex]

Explanation:

Given:

a)

From the vector addition rule we know:

[tex]R^2={A^2+B^2+2A.B\cos\theta}[/tex]

where

[tex]\theta=[/tex] angle between the two vectors with their tail at common point.

b)

Putting respective values:

[tex]7.6^2=7.1^2+5^2+7.1\times 5\times \cos \theta[/tex]

[tex]\theta=119.8138^{\circ}[/tex]

To add the two vectors, draw them graphically and connect the tip of one vector to the tail of the other. The angle between the original two vectors can be determined using the adjacent and hypotenuse sides of a right triangle.

To add the two vectors, draw the first vector as a line segment with a length of 7.1 units and draw the second vector as a line segment with a length of 5.0 units. Place the tail of the second vector at the tip of the first vector. The sum of the two vectors is the line segment connecting the tail of the first vector to the tip of the second vector. This sum vector should have a length of 7.6 units, as mentioned in the question.

Using the sketch from Part (a), draw a horizontal line from the tail of the first vector to the tip of the second vector. Next, draw a vertical line from the tip of the first vector to the tip of the second vector. Connect the tail of the first vector to the tip of the second vector to form a right triangle. The angle between the original two vectors is the angle opposite to the horizontal line. To determine this angle, we can use the trigonometric inverse function. Let's call the angle 'theta'. We have the adjacent side as 5.0 units and the hypotenuse as 7.6 units. Using the arccosine function (inverse cosine), we can calculate theta using the equation: theta = arccos(5.0/7.6).

https://brainly.com/question/32196545

#SPJ3

Answer:

The change of the bar's length is [tex] 3.9\times10^{-4} m[/tex]

Explanation:

The bar length is a function of temperature T above room temperature:

[tex] L(T)=1.0000+2.4\times10^{-5} T[/tex]

So, if we evaluate at T= 16.1 C above room temperature

[tex]L(16.1)=1.0000+2.4\times10^{-5} (16.1)[/tex]

[tex]L=1.00039 m [/tex]

Now we can find the change of the bar length with the difference of L and Lo (the length at room temperature)

[tex]L- L_0=1.00039-1.0000 = 3.9\times10^{-4} m[/tex]