Need help !!!!! Stuck asap

Need Help !!!!! Stuck Asap

Answers

Answer 1
Hello!

The answer is:

Hence, the new pressure will be 2.07 atm.

[tex]P_{2}=2.07atm[/tex]

Why?

Since we know that the gas is inside of a rigid container, meaning that the volume will be kept constant, we can solve the problem using the Gay-Lussac's Law.

The the Gay-Lussac's Law establishes that when an ideal gas is kept at the same volume, the pressure and the temperature will be proportional.

We need to pay special attention when we are working with the Gay-Lussac's Law since its equaitons works with absolute temperatures (Kelvin ), so, if we are working with relative temperatures such as Celsius degrees or Fahrenheit degrees, we need to convert the temperatures to Kelvin.

We can convert from Celsius degrees to Kelvin using the following formula:

[tex]Temperature(K)=Temperature(C\°)+273[/tex]

So, we have the Gay-Lussac's equation:

[tex]\frac{P_{1}}{T_{1}}=\frac{P_{2}}{T_{2}}[/tex]

Also, we are given the following information:

[tex]T_{1}=30\° \\P_{1}=2atm\\T_{2}=40\°[/tex]

Therefore, converting the temperature to Kelvin, we have:

[tex]T_{1}=30C\°=30+273K=303K\\\\T_{1}=40C\°=40+273K=313K\\[/tex]

Now, calculating we have:

[tex]\frac{P_{1}}{T_{1}}=\frac{P_{2}}{T_{2}}[/tex]

[tex]P_{2}=\frac{P_{1}}{T_{1}}*T_{2}\\\\P_{2}=\frac{2atm}{303K}*313K=2.07atm[/tex]

Hence, the new pressure will be 2.07 atm.

[tex]P_{2}=2.07atm[/tex]

Have a nice day!


Related Questions

25) If an object’s density is greater than 1.00 g/mL, it will ______________ in water.

A) Sink
B) Float
__________________________________________

If an object’s density is less than 1.00 g/mL, it will ______________ in water.

A) Sink
B) Float
_______________________________________________________

26) What is the density of a rock if it has a mass of 50 g and a volume of 10 mL? (You must show your work!)

Answers

Answer:

1- Option A = Sink

2- Option B = Float

Explanation:

1- If an object’s density is greater than 1.00 g/mL, it will sink in water.

For example, the density of aluminum is 2.7g/cm³. That is why it will sink in water.

2- If an object’s density is less than 1.00 g/mL, it will float in water.

For example, the density of oak is 0.7 g/cm³. That is why oak will float in water.

3-  Given data:

Mass, m = 50 g  

Volume, v = 10 cm3 ( 1ml = 1cm3)

Formula of density :          

Density = mass/ volume

          d = m/v

          d = 50g/10cm3

          d = 5 g/cm3

           

Look at the graph below. Will mark brainliest

A graph is shown with Absolute Brightness shown on y axis and Surface temperature in degree Celsius shown on x axis. The Dwarf stars are shown along a slanting line from coordinates 30,000 and minus 3 to 10,000 and minus 4. The Main Sequence stars are shown along a slanting line from coordinates 20,000 and minus 2 to 2,000 and minus 6. The giants are shown along a line parallel to the x axis from coordinates 5,000 and 2 to 2,000 and 3. The supergiants are shown along a line parallel to the x axis from coordinates 7,500 and 4 to 2,500 and 4. Point A has coordinates 20,000 and minus 4. Point B has coordinates 2,500 and minus 4. Point C has coordinates 5,000 and 2. Point D has coordinates 7,000 and 4.

Which of the following stars is most likely to be blue?

Star A
Star B
Star C
Star D

Answers

Answer:

Star A

Explanation:

Based on the information provided, we can determine that the color of a star is related to its surface temperature, with hotter stars appearing more blue and cooler stars appearing more red.

Looking at the graph, we can see that the stars along the left side of the graph (with negative values on the x-axis) are hotter than the stars on the right side of the graph. Therefore, Star A, which has coordinates of 20,000 and -4, is hotter than Star B, which has coordinates of 2,500 and -4.

Comparing the coordinates of Star A to the lines representing the different types of stars, we can see that it falls on the line for main sequence stars. Main sequence stars are typically white or blue-white in color, so Star A is most likely to be blue.

Mark me brainliest

Star D is most likely to be blue, as it has a high surface temperature compared to the other stars listed (7,000 degrees Celsius) and aligns with the typical characteristics of blue stars.

The color of a star is closely related to its surface temperature. Hotter stars tend to appear bluer, while cooler stars appear redder.

Looking at the provided coordinates for the stars:

- Star A has coordinates (20,000, -4), indicating a high surface temperature.

- Star B has coordinates (2,500, -4), indicating a lower surface temperature.

- Star C has coordinates (5,000, 2), indicating a moderate surface temperature.

- Star D has coordinates (7,000, 4), indicating a relatively high surface temperature.

Among the given stars, Star A and Star D have the highest surface temperatures, making them more likely to appear blue. However, between these two, Star D has an even higher temperature, making it the most likely to be blue. Therefore, Star D is the star most likely to be blue.

Learn more about surface temperature here:

https://brainly.com/question/28226438

#SPJ2

which of the following is not a base?
A. bleach
B.toothpaste
C.shampoo
D.orange

Answers

Answer:

c. shampoo

Explanation:

which two traits best help a cactus conserve water in the dry conditions of a west texas desert ecosystem?​

Answers

The answer is sharp spines and waxy stems. Hope this helped.

What products are formed in the electrolysis of 1.0 M
aqueous HBr?

Answers

Final answer:

In the electrolysis of 1.0 M aqueous HBr, hydrogen gas is formed at the cathode, while bromine gas and hydroxide ions are formed at the anode.

Explanation:

In the electrolysis of 1.0 M aqueous HBr, the following products are formed: hydrogen gas (H2) at the cathode, and bromine gas (Br2) and hydroxide ions (OH-) at the anode.

At the cathode, reduction occurs where two hydrogen ions (H+) gain electrons to form hydrogen gas:

2H+ + 2e- -> H2

At the anode, oxidation occurs where bromide ions (Br-) lose electrons to form bromine gas and hydroxide ions:

2Br- - 2e- -> Br2

2H2O - 4e- -> 4OH- + O2

Learn more about Electrolysis here:

https://brainly.com/question/33301115

#SPJ3

What is the number of moles in 500 L of He gas at STP

Answers

Answer:

22.3 mol

Explanation:

He is in STP conditions

This means that it is in standard conditions of temperature and pressure, under these conditions the pressure has a value of 1 atm and the temperature has a value of 273 K

To calculate the number of moles in 500L of He gas we use the ideal gas equation

[tex]P.V=n.r.T\\r(constant of ideal gases)= 0.082\frac{atm.L}{K.mol}[/tex]

We cleared the moles (n)

[tex]P.V=nr.T\\\frac{P.V}{r.T}=n\\\frac{1atm.500L}{0.082atm.L/K.mol.273K}=n\\\\22.3 mol=n[/tex]

The number of moles in 500 L of He gas at STP 22.3 mol

Final answer:

The number of moles in 500 L of helium (He) gas at standard temperature and pressure (STP) is approximately 22.32, based on the standard molar volume concept of chemistry.

Explanation:

The number of moles in 500 L of He gas at STP can be determined using the standard molar volume, which states that at standard temperature and pressure (STP), one mole of any ideal gas occupies a volume of 22.4 L. In this case, to find the moles of helium gas, you would use the formula n = V/V_m, where n is the number of moles, V is the volume of the gas, and V_m is the molar volume at STP.

Substituting the given values into the equation: n = 500 L/22.4 L/mol = 22.32 moles.So, there are approximately 22.32 moles of helium gas in 500 L at STP.

Learn more about Moles of Gas here:

https://brainly.com/question/35565270

#SPJ12

If 10.0 L of oxygen gas at STP are heated to 512 Celsius what will be the new volume of the gas if the pressure is also increased to 1.75 ATM?

Answers

Answer:

16.4 L

Explanation:

we can use the combined gas law equation that gives the relationship among volume, temperature and pressure conditions of gases.

P1V1/T1 = P2V2/T2

STP conditions are standard temperature and pressure conditions

P1 is standard pressure = 1 atm , T1 is standard temperature = 273 K

and V1 is the volume

P2 is pressure, T2 is temperature and V2 is volume at the second instance

temperature is in kelvin scale,

512 ° + 273 = 785 K

substituting the values in the equation

1 atm x 10.0 L / 273 K = 1.75 atm x V / 785 K

V = 16.4 L

new volume is 16.4 L

Snow forms when clouds cool to the dew point. True False

Answers

Answer:

False.

Explanation:

Snow forms when tiny ice crystals in clouds stick together to make snowflakes.

Answer:

what he said lol.

Explanation:

What is calcium used for in our body?

Answers

Answer:

It is necessary for contracting muscles, forming and strengthening bones and teeth, conducting nerve impulses throughout the body, clotting blood, maintaining a normal heartbeat

Answer:

calcium is essential for living organisms.  it is vital for the body's good health.

Bone health

Vitamin D is helps the body absorb and retain calcium

it helps with muscle contraction

helps in normal blood coagulation (clotting)

it is a co-factor for many enzymes

helps the smooth muscles that surrounds the blood vessels; causes it to relax

Explanation:

Gases are easily compressible, but other states of matter are not. Which statement best helps to explain the statement above? Their particles are more lightweight than the particles of the other states. Their particles are more spread out than the particles of the other states. Their particles are more flexible than the particles of the other states. Their particles are smaller in size than the particles of the other states.

Answers

Answer:their particles are more spread out than others

Explanation:

Answer:

Number 2

Explanation:

Their particles are more spread out than the particles of the other states

what are the main risk and main benefit when a society uses energy from nuclear fission?

a. risk of harm to flying animals; benefit of reducing greenhouse gases
b. risk of high greenhouse gas and particle emissions; benefit of reducing short-term costs
c. risk of groundwater contamination; benefit of using a renewable resource
d. risk from radioactive material; benefit of obtaining low-cost energy

Answers

Answer:

D.

Explanation:

Nuclear energy does not have greenhouse gas emissions. The emissions produced by nuclear fission plants are similar to renewable energy sources.The generation of power using nuclear energy does not affect air quality thus providing a clean source of energy.Nuclear energy originates from radioactive material which are harmful to living organisms.

Answer:

D. risk from radioactive material; benefit of obtaining low-cost energy

Explanation:

I just took the test. Ap*x

34. Given the fact that the concentrations of reactants and
products are not changing, why is the word dynamic
used to describe chemical equilibrium?

Answers

Answer:

The word dynamic is used to describe chemical equilibrium because even though the concentration of reactants and products remains constant, the reaction does not stop, but still continues with the rate of forward reaction equal to the rate of backward reaction. This is opposed to static equilibrium where there is no reaction at all.

Hope this helps you out!

The word dynamic is used to describe chemical equilibrium because, despite concentrations of reactants and products being constant, reactions continue in both directions at the same rate, indicating continuous exchange.

Given the fact that the concentrations of reactants and products are not changing, the word dynamic is used to describe chemical equilibrium because, at this state, the forward and reverse reactions are happening at the same rate. Even though there is no net change in the concentrations of reactants and products, reactions continue to occur in both directions. This means that molecules of reactants are constantly being converted into products at the same rate as products are being converted back into reactants, maintaining a constant concentration of both. Therefore, the equilibrium is dynamic because the reactants and products are in a state of continuous, but balanced, exchange.

Need help !!!!! ASAP

Answers

Hello!

The answer is:

The new temperature will be equal to 4 K.

[tex]T_{2}=4K[/tex]

Why?

We are given the volume, the first temperature and the new volume after the gas is compressed. To calculate the new temperature after the gas was compressed, we need to use Charles's Law.

Charles's Law establishes a relationship between the volume and the temperature at a gas while its pressure is constant.

Now, to calculate the new temperature we need to assume that the pressure is kept constant, otherwise, the problem would not have a solution.

From Charle's Law, we have:

[tex]\frac{V_{1}}{T_{1}}=\frac{V_{2}}{T_{2}}[/tex]

So, we are given the following information:

[tex]V_{1}=500mL\\T_{1}=20K\\V_{2}=100mL[/tex]

Then, isolating the new temperature and substituting the given information, we have:

[tex]\frac{V_{1}}{T_{1}}=\frac{V_{2}}{T_{2}}[/tex]

[tex]T_{2}=\frac{T_{1}}{V_{1}}*V_{2} \\[/tex]

[tex]T_{2}=\frac{20.00K}{500mL}*100mL\\[/tex]

[tex]T_{2}=4K[/tex]

Hence, the new temperature will be equal to 4 K.

[tex]T_{2}=4K[/tex]

Have a nice day!

If the amount of CFCs in the atmosphere decreases, then __.

Plato users: ozone holes could begin to shrink in size

Answers

Answer:

Ozone holes could begin to shrink in size.

Explanation:

The use of CFCs today is one of the anthropogenic causes of ozone depletion. CFCs are found in Air conditioners, refrigerators and are excellent coolants.

When CFCs are released into the atmosphere, they react spontaneously with ozone.

Ozone is made up of 3 oxygen atoms and it serves as a protective covering for the very harmful ultraviolet rays from reaching the earth. Ozone cuts off these radiation and it reflects them back into space.

Chloroflurocarbons release Chlroine atoms when they get broken down by ultraviolet rays. The Cl released produces a series of reactions in the presence of ozone.

Chlorine is very reactive as it is an halogen. It requires just an electron to complete its octet.

Chlorine freely reacts with the ozone producing a range of compounds. Most of the ozone becomes oxygen molecules.

This would deplete the ozone greatly. The increasing use of CFCs leaves holes in the ozone layer. The holes allow for harmful UV rays to reach the earth surface. This can lead to various harm on human lives on the earth surface.

This is why CFCs are not permitted in appliances again.

Which property describes how much energy must be added to an atom to remove an outermost election

Answers

Answer:

By definition, the first ionization energy of an element is the energy needed to remove the outermost, or highest energy, electron from a neutral atom in the gas phase. The process by which the first ionization energy of hydrogen is measured would be represented by the following equation.

Explanation:

PLZ SOMEBODY MUST HELP
BRAINLYEST JUST HELP
PLEASE IMMEDIATELY
JUST HELP PLZ
30 POINTS CAN YOU PLZ
HELP

Strong conductivity of plasma allows it to act and react as ______________ and ____________ fields

Answers

Answer:

I think it is high and electric

Explanation:

Answer:

strong conductivity of plasma allows it to act and react as electric and magnetic fields.

When 2 grams of powdered lead (IV) oxide was added to 100 cm3 of hydrogen peroxide, water and oxygen were produced. Lead (IV) oxide was not used up in the reaction. Based on the information, which of the following is likely to decrease the rate of formation of the products?

Replacing the powdered lead oxide with its large crystals
Removing lead (IV) oxide from the reaction mixture
Using 50 cm3 of hydrogen peroxide
Using 1.0 gram of lead (IV) oxide

Answers

Answer:

The right answer is:

Replacing the powdered lead oxide with its large crystals

Removing lead (IV) oxide from the reaction mixture

Using 1.0 gram of lead (IV) oxide

Explanation:

Based on the given information this reaction is the catalytic decomposition of H₂O₂ into water and oxygen  using Lead (IV) oxide as a catalyst.

The catalyst surface area is directly proportional to the reaction rate So, Replacing the powdered lead oxide with its large crystals would decrease the reaction rate due to the has larger surface area than its large crystals.

     2. Also, Removing lead (IV) oxide from the reaction mixture  the reaction rate decreased because as the catalyst is removed.

     3.  Using 50 cm³ of hydrogen peroxide  doesn't affect the rate because the concentration of the reactant doesn't change.

     4. Using 1.0 gram of lead (IV) oxide would decrease the reaction rate because the amount of catalyst decreased

So, The right answer is:

Replacing the powdered lead oxide with its large crystals

Removing lead (IV) oxide from the reaction mixture

Using 1.0 gram of lead (IV) oxide

How to remember the first 20 elements of the periodic table?

Answers

The way the brain works is that you learn from repetition, the more you do something the better you get at it. So the more you review the first 20 elements on the periodic table, the more often you'll be able to remember it until you're about to recount them without hardly thinking of it.

My advice to you is to grab some pieces of paper. Cut them up into sixths until you have twenty of them, then write down on each smaller piece of paper the numbers 1 up to 20. Then on the other side of the paper, write down the element. Do this in accordance to their position on the periodic table. Then spend some time guessing as to what element is on the other side of the numbered paper. You'll start guessing, "the first element is Hydrogen. The second element is Helium." And so on. Rinse and repeat until you're able to guess the element depending on its placement on the periodic table. Good luck!

Happy. – H Hydrogen

Henry – He Helium

Lives – Li Lithium

Beside – Be Beryllium

Born – B Boron

Cottage – C Carbon

Near – N Nitrogen

Our – O Oxygen

Friend – F Fluorine.

Nelly – Ne Neon

Nancy – Na Sodium

Mg – Mg Magnesium

Allen – Al Aluminum

Silly – Si Silicon

Patrick – P Phosphorus

Stays – S Sulphur

Close – Cl Chlorine

Arthur – Ar Argon

Kisses – K Potassium

Carrie – Ca Calcium

Hope this helps :)

(Show your work please)

Answers

Answer:

[tex]\boxed{\text{bp =100.106 }^{\circ}\text{C; fp = -0.387 }^{\circ}\text{C; bp =101.68 }^{\circ}\text{C}}[/tex]

Explanation:

Q8. Boiling point

Data:

m(KOH) = 53.1 g

m(H₂O) = 9.10 kg

    K_b = 0.512 °C·kg·mol⁻¹

Calculations:

(a) Moles of KOH

[tex]\text{Moles of KOH} = \text{53.1 g KOH} \times \dfrac{\text{1 mol KOH}}{\text{56.11 g KOH}} = \text{0.9464 mol KOH}[/tex]

(b) Molal concentration

The formula for molal concentration (b) is

[tex]b = \dfrac{\text{moles of solute}}{\text{kilograms of solvent}} = \dfrac{0.9464}{9.1} = \text{0.104 mol/kg}[/tex]

(c) Boiling point elevation

The formula for the boiling point elevation ΔTb is

[tex]\Delta T_{b} = iK_{b}b[/tex]

i is the van’t Hoff factor: the number of moles of particles you get from a solute.

For KOH,

 KOH(s)  ⟶     K⁺(aq) + OH⁻(aq)

1 mol KOH ⟶ 2 mol particles   i = 1

[tex]\Delta T_{b} = 2 \times 0.512 \times 0.104 = \text{0.106 }^{\circ}\text{C}[/tex]

(d) Boiling point

[tex]T_{b} = T_{b}^{\circ} + \Delta T_{b} = 100.000 + 0.106 = \text{100.106 }^{\circ}\text{C}[/tex]

Q9. Freezing point  

[tex]\Delta T_{f} = iK_{f}b = 2 \times 1.86 \times 0.104 = \text{0.387 }^{\circ}\text{C}\\\\T_{f} = T_{f}^{\circ} - \Delta T_{f} = 0.000 - 0.387 = \text{-0.387 }^{\circ}\text{C}[/tex]

Q10. Boiling point

[tex]\text{Kilograms of phenol} = 645 \times \dfrac{1}{1000} = \text{0.645 kg phenol}\\\\b = \dfrac{0.910}{0.645} = \text{1.411 mol/kg}\\\\\Delta T_{b} = 1\times 1.19 \times 1.411 = \text{1.68 }^{\circ}\text{C}\\T_{b} = 100.00 + 1.68 = \text{101.68 }^{\circ}\text{C}[/tex]

Arrange the levels of ecological organization from smallest to largest. (ecosystem, population, community, organism)

Answers

Answer:

organism, population, community, ecosystem

Explanation:

Answer: Organism, Population, Community, and lastly Ecosystem

Explanation: Organism is one living thing. Population is a group of organisms of one type that live together. Communities are populations that live together in an area. Ecosystem is a community with its non living surroundings.

Hope this helps :)

What will the final volume of a gas be if it is heated from 9 K to 117 K, and the initial volume is 85.5 L?

Answers

Answer:

1111.5L

Explanation:

if a gas occupies at 5.40 L at a pressure of 1.25atm, what will be its volume at a pressure of 3.00 atm? (Show work)

Answers

Answer:

Explanation:

Givens

P = 1.25 atm

V = 5.4 L

P1 = 3 atm

V1 = ??

Formula

The basic formula is P*V = P1 * V1

Solution

1.25 * 5.4 = 3 * V1

6.75 = 3*V1

6.75 /3 = 3*V1/3

2.25 = V1

-Material A has a melting point of 34°C whereas Material B has a melting point of 56°C. Both materials have been placed in an oven at 50°C Describe the state of each material after being being in the oven for a period of time.
I'm confused, if material B is on for the same amount of time does that mean that it has liquified and material A has melted slightly?

Answers

Answer:

Explanation:

Material A has a melting point of 34°C

Material B has a melting point of 56°C

Both materials, lets say a metal have been subjected to a temperature of 50°C

After a period of time, both of them would have melted to their liquid state.

The atoms of the solids would vibrates and the bonds would begin to break to form melt.

Material A would be the first to melt as it has a lower melting point. The lower the melting point, the faster and quicker it would reach its melting temperature.

Material B would need to accumulate more heat and its temperature would continue to rise for the phase change to occur. As it reaches the 50°C mark, the bonds are set free and a melt forms.

Excess magnesium reacts with 165.0 grams of hydrochloric acid in a single displacement reaction.
What volume of hydrogen gas is produced at STP?

Answers

Answer:

The volume of hydrogen gas produced will be approximately 50.7 liters under STP.

Explanation:

Relative atomic mass data from a modern periodic table:

H: 1.008;Cl: 35.45.

Magnesium is a reactive metal. It reacts with hydrochloric acid to produce

Hydrogen gas [tex]\rm H_2[/tex], andMagnesium chloride, which is a salt.

The chemical equation will be something like

[tex]\rm ?\;Mg\;(s) + ?\;HCl \;(aq)\to ?\;H_2 \;(g)+ [\text{Formula of the Salt}][/tex],

where the coefficients and the formula of the salt are to be found.

To determine the number of moles of [tex]\rm H_2[/tex] that will be produced, first find the formula of the salt, magnesium chloride.

Magnesium is a group 2 metal. The oxidation state of magnesium in compounds tends to be +2.

On the other hand, the charge on each chloride ion is -1. Each magnesium ion needs to pair up with two chloride ions for the charge to balance in the salt, magnesium chloride. The formula for the salt will be [tex]\rm MgCl_2[/tex].

[tex]\rm ?\;Mg\;(s) + ?\;HCl\;(aq) \to ?\;H_2 \;(g)+ ?\;MgCl_2\;(aq)[/tex].

Balance the equation. [tex]\rm MgCl_2[/tex] contains the largest number of atoms among all species in this reaction. Start by setting its coefficient to 1.

[tex]\rm ?\;Mg\;(s) + ?\;HCl\;(aq) \to ?\;H_2 \;(g)+ {\bf 1\;MgCl_2}\;(aq)[/tex].

The number of [tex]\rm Mg[/tex] and [tex]\rm Cl[/tex] atoms shall be the same on both sides. Therefore

[tex]\rm {\bf 1\;Mg}\;(s) + {\bf 2\;HCl}\;(aq) \to ?\;H_2 \;(g)+ {1\;\underset{\wedge}{Mg}\underset{\wedge}{Cl_2}}\;(aq)[/tex].

The number of [tex]\rm H[/tex] atoms shall also conserve. Hence the equation:

[tex]\rm {1\;Mg}\;(s) + {2\;\underset{\wedge}{H}Cl}\;(aq) \to {\bf 1\;H_2 \;(g)}+ {1\;MgCl_2}\;(aq)[/tex].

How many moles of HCl are available?

[tex]M(\rm HCl) = 1.008 + 35.45 = 36.458\;g\cdot mol^{-1}[/tex].

[tex]\displaystyle n({\rm HCl}) = \frac{m(\text{HCl})}{M(\text{HCl})} = \rm \frac{165.0\;g}{36.458\;g\cdot mol^{-1}} = 4.52576\;mol[/tex].

How many moles of Hydrogen gas will be produced?

Refer to the balanced chemical equation, the coefficient in front of [tex]\rm HCl[/tex] is 2 while the coefficient in front of [tex]\rm H_2[/tex] is 1. In other words, it will take two moles of [tex]\rm HCl[/tex] to produce one mole of [tex]\rm H_2[/tex]. [tex]\rm 4.52576\;mol[/tex] of [tex]\rm HCl[/tex] will produce only one half as much [tex]\rm H_2[/tex].

Alternatively, consider the ratio between the coefficient in front of [tex]\rm H_2[/tex] and [tex]\rm HCl[/tex] is:

[tex]\displaystyle \frac{n(\text{H}_2)}{n(\text{HCl})} = \frac{1}{2}[/tex].

[tex]\displaystyle n(\text{H}_2) = n(\text{HCl})\cdot \frac{n(\text{H}_2)}{n(\text{HCl})} = \frac{1}{2}\;n(\text{HCl}) = \rm \frac{1}{2}\times 4.52576\;mol = 2.26288\;mol[/tex].

What will be the volume of that many hydrogen gas?

One mole of an ideal gas occupies a volume of 22.4 liters under STP (where the pressure is 1 atm.) On certain textbook where STP is defined as [tex]\rm 1.00\times 10^{5}\;Pa[/tex], that volume will be 22.7 liters.

[tex]V(\text{H}_2) = \rm 2.26288\;mol\times 22.4\;L\cdot mol^{-1} = 50.69\; L[/tex], or

[tex]V(\text{H}_2) = \rm 2.26288\;mol\times 22.7\;L\cdot mol^{-1} = 51.37\; L[/tex].

The value "165.0 grams" from the question comes with four significant figures. Keep more significant figures than that in calculations. Round the final result to four significant figures.

What is the rate law for the reaction?​

Answers

Answer:

The correct answer option A.

Explanation:

The reaction rate is determined experimentally for different concentrations of the reactants. These data indicate that by changing the concentration of Nh4 + or NO2-, the reaction rate changes. If the concentration of Nh4 + is doubled, keeping constant at NO2- the reaction rate is doubled, and if the concentration of that same reactant is changed by a factor of 4, it is quadrupled, and so on. If the concentration of NO2- is now modified in the same way as the previous one, it is observed that it also changes the reaction rate in this way. And he overall dependence of the reaction on the concentration will be the same for both reactants.

Therefore the reaction rate is proportional to the concentration of Nh4 + and NO2-.

What is true about the relative concentrations of hydrogen ions or hydroxide ions in an acidic solution?

a
Hydrogen-concentration is less
b
Hydroxide-ion concentration is greater
c
The concentrations are equal
d
Hydroxide-ion concentration is less

Answers

Hydroxide ion concentration is less this statement is true about the relative concentration of hydrogen ions or hydroxide ions in an acidic solution.

Hence, Option (D) is correct answer.

What is pH ?

pH is used to measure whether the substance is acidic, basic or neutral and the range is 0 - 14. If the pH is less than 7 then the solution is acidic in nature. If the pH is more than 7 then the solution is basic in nature. If the pH is equal to 7 then the solution is neutral in nature.

What is concentration of hydrogen ion or hydroxide ion in acidic solution ?

Acidic solution means the pH of the solution is less than 7. When the solution has pH less than 7 it shows that the hydrogen ion concentration is higher than the hydroxide ion concentration.

Thus, from the above conclusion we can say that Hydroxide ion concentration is less this statement is true about the relative concentration of hydrogen ions or hydroxide ions in an acidic solution.

Hence, Option (D) is correct answer.

Learn more about the pH here: brainly.com/question/172153

#SPJ2

Final answer:

In an acidic solution, the concentration of hydrogen or hydronium ions is greater, and as a result, the concentration of hydroxide ions is less.

Explanation:

In an acidic solution, the concentration of hydrogen ions (H+) or hydronium ions (H3O+) is greater than the concentration of hydroxide ions (OH-). This is due to the ionization of the acid in water, which adds more hydrogen ions into the solution, leading to a proportionally lower concentration of hydroxide ions. As per Le Châtelier's principle, the reaction equilibrium of water autoionization shifts to the left, which reduces the concentration of hydroxide ions. Therefore, the correct answer is d: Hydroxide-ion concentration is less.

The temperatures of the two glasses of water shown in the photograph above are 30°C and 0°C. Which of the following is a correct statement about two glasses of water?
A. The cold water has a higher average kinetic energy
B. The warmer water has lower thermal energy
C. The molecules of the cold water move faster
D. The molecules of the warm water have more kinetic images

Answers

d! the molecules of the warmer water would have a higher average kinetic energy :)

A weather balloon contains 1.10X10 to the power of 5 mol of helium and has a volume of 2.70x10 to the power of 6 L at 1.00 atm pressure. Calculate the temperature of the helium

Answers

Answer:

299.14 K or 26°C

Explanation:

The ideal gas law, also called the general gas equation, is the equation of state of a hypothetical ideal gas.

The ideal gas law is often written as

PV = nRT

where P ,V and T are the pressure, volume and absolute temperature;

n is the number of moles of gas and  R is the ideal gas constant.

n=1.10 x 10^5 mol  

V= 2.70 x 10^6 L  

P= 1.00 atm= 101.325 kPa  

R= 8.314 kPa*L/ mol*K

when the formula is  rearranged, T=PV/ nR  

T = (101.325kPa * 2.70 x 10^6 L)/ (1.10 x 10^5 mol * 8.314 kPa*L/ mol*K)  

T = 299.1421917 K

or

T = 299.14 - 273.15 = 25.99 =  26°C

Final answer:

Using the Ideal Gas law, we find the temperature T = ((1.00 atm)*(2.70x10^6 L))/((1.10x10^5 mol)*(0.0821 L.atm/K.mol)). Calculating that gives you the temperature (in Kelvin) of the helium in the balloon.

Explanation:

In that case, you're being asked to find the temperature of helium inside a weather balloon. The Ideal Gas Law (PV=nRT) will be useful here, where P is the pressure (1 atm), V is the volume (2.7x10 to the power of 6 L), n is the number of moles of helium (1.10x10 to the given power of 5 mol), R is the gas constant (0.0821 L.atm/K.mol) and T is the temperature which we need to calculate.

So, the Ideal Gas Law becomes: (1.00 atm)*(2.70x10^6 L) = (1.10x10^5 mol)*(0.0821 L.atm/K.mol)*T

Solving for T by isolating it on one side gives T = ((1.00 atm)*(2.70x10^6 L))/((1.10x10^5 mol)*(0.0821 L.atm/K.mol))

Calculating that should give you the temperature (in Kelvin) of the helium in the balloon.

Learn more about Ideal Gas Law here:

https://brainly.com/question/30458409

#SPJ3

calculate the empirical formula 9.1 g of lithium and 10.4 g of oxygen

Answers

Final answer:

To find the empirical formula of a compound with 9.1 g of lithium and 10.4 g of oxygen, we calculate the moles of each element and express their ratio in the simplest whole numbers. The empirical formula is determined to be Li₂O.

Explanation:

To calculate the empirical formula of a compound formed from lithium and oxygen, we need to determine the moles of each element present in the 9.1 grams of lithium and 10.4 grams of oxygen. The molar mass of lithium (Li) is approximately 6.94 g/mol, and the molar mass of oxygen (O) is about 16.00 g/mol.

First, we calculate the moles of lithium:
Moles of Li = mass (g) ÷ molar mass (g/mol) = 9.1 g ÷ 6.94 g/mol = 1.31 moles of Li

Next, we calculate the moles of oxygen:
Moles of O = mass (g) ÷ molar mass (g/mol) = 10.4 g ÷ 16.00 g/mol = 0.65 moles of O

Now we determine the simplest whole number ratio of the elements in the compound:
Li to O ratio = 1.31 moles of Li ÷ 0.65 moles of O = 2:1

Therefore, the empirical formula is Li₂O

A gas occupies 318 liters at 10.0 atm. What is the pressure if the volume becomes 662.5 L?

Answers

Answer:

4.8 atm.

Explanation:

We can use the general law of ideal gas: PV = nRT.

where, P is the pressure of the gas in atm.

V is the volume of the gas in L.

n is the no. of moles of the gas in mol.

R is the general gas constant,

T is the temperature of the gas in K.

If n and T are constant, and have two different values of V and P:

P₁V₁ = P₂V₂

P₁ = 10.0 atm, V₁ = 318.0 L.

P₂ = ??? atm, V₂ = 662.5 L.

∴ P₂ = P₁V₁/V₂ = (10.0 atm)(318.0 L)/(662.5 L) = 4.8 atm.

Other Questions
Which of the following is a physiological benefit of exercising equivalent 0f 2(2a-5)-(a-3) Can someone please help me on these 3 questions please thank you (Two questions)The temperature in an office is controlled... PLEASE Solve log 60 - log 30 The Cooking Club made some pies to sell during lunch to raise money for an end-of-year banquet. The Cafeteria contributed pies to the club. Each pie was then cut into four pieces to the club. Each pie then cut into four pieces and sold. There were a total of 36 pieces to sell. How many pies did the club make? How do musical instruments vary pitch? by changing the frequency of standing waves by increasing the amplitude of standing waves by interrupting sound waves by changing the wavelength of standing waves The MOST accurate way to determine the evolutionary relationship between two animals is through the examination ofA)common behaviors.B)similar physical features.C)DNA or protein sequences of shared genes.D)fossilized ancestors that they may have in common Please help me.... (: Which category of drugs does LSD belong to? Please help me outWhich of these inequalities are equivalent to r > -11? Check all that apply.-r < 113r < -333r > -33-3r < 33-3r > 33 What is the value of3ab + 5b-6 whena=-1 and b=3? 2/3m-4/5-3/5m need answer ASAP Calculate the force between charges of 5.0 x 10^-8 c and 1.0 x 10^-7 if they are 5.0 feet apart the 1968 Democratic National Convention in Chicago was the target of protests by...A] Pro-war Republicans.B] Pro-war Democrats. C] Anti-war Republicans.D] Anti-war Democrats. Write the standard equation of a circle with the center (2,5) and a radius 16 Henry works at a computer store. He is paid $14.00 per hour, plus 5% commission. He worked 8 hours and sold 6 computers today for a total of $5,790. Henry wants to determine how much he earned. To calculate his pay, Henry multiplies 14 8, then adds the product to 5,790, then multiplies the sum by 0.05. Is his calculation correct?A)Yes, Henry's calculation is correct.B)No, he should have multiplied $5,790 by 0.05.C)No, he should have added $112 to $5,790.D)No, he should have multiplied 112 by 0.05. Snapdragons show co-dominance for red and white flower color. which of these would you expect to have dark red flowers? look at picture and plzz help Your friend can clap his hands 28 times in 12 seconds. How many times can your friend clap his hands in 1.75 minutes?