Near the end of 2018, Byron realizes that he has a net short-term capital loss of $13,000 for the year. Byron has taxable income (not including the loss) of $123,000 and is single. He owns numerous stocks that could be sold for a long-term capital gain.
a. What should he do before the end of 2018?

Answers

Answer 1

Solution:

Short-term capital loss of $13,000

Taxable income (not including the loss) of $123,000

He has several inventories, which can be marketed for a long-term profit.

Since Byron can only deduct $3,000 for the capital loss he must sell stock at a capital gain of $10,000 to offset the amount over the $3,000 deduction maximum.


Related Questions

An automobile, having an original value of $18,000 when new, depreciates at a rate of 18% per year. Determine, to the nearest tenth of a year, how long it takes for the value of the automobile to decrease to $1,000.

Answers

Answer:

14.6 years

Explanation:

Applying an early depreciation rate 'r = 18%', the value of an automobile originally valued at $18,000, after 't' years, is given by:

[tex]V(t)=\$18,000*(1-r)^t}[/tex]

The number of years required for which V(t) = $1,000 is:

[tex]\$1,000=\$18,000*(1-0.18)^t\\ln(\frac{1,000}{18,000})=t*ln(0.82)\\ t=\frac{ln(0.05555555)}{ln(0.82)} \\t=14.6\ years[/tex]

It will take 14.6 years for the value of the automobile to decrease to $1,000.

Final answer:

To find out how long it takes for an automobile, originally valued at $18,000 and depreciating at 18% per year, to reach a value of $1,000, the formula for exponential decay is applied, revealing it would take about 16.7 years.

Explanation:

The question involves finding out how long it takes for the value of an automobile to decrease to $1,000, given that its original value is $18,000 and it depreciates at a rate of 18% per year. This can be solved using the formula for exponential decay, which is V = P[tex](1 - r)^t[/tex], where V is the final value, P is the principal amount (original value), r is the rate of depreciation, and t is the time in years. Plugging in the values gives us $1,000 = $18,000[tex](1 - 0.18)^t[/tex].

To solve for t, we rearrange the formula to t = log(V/P) / log(1 - r). Substituting the numbers in gives us t = log(1,000/18,000) / log(0.82), which calculates to t ≈ 16.7 years. So, it will take approximately 16.7 years for the automobile's value to decrease to $1,000.

What type of adjustment is Completed services that were paid for six months earlier, $1,070? The Service Revenue unadjusted balance as of December 31 is $10,300. The Unearned Revenue balance as of December 31 is $11,600

Answers

Answer:

Unearned Revenue Balance   $10530

Service revenue Balance    $11370

Explanation:

given data

time = 6 month

Completed services  paid =  $1,070

Service Revenue unadjusted = $10,300

Unearned Revenue balance = $11,600

solution

Unearned Revenue

31-Dec     $11,600    

31-Dec  $1070  

Balance   $11,600 - $1070

Balance   $10530

and

Service revenue

31-Dec      $10,300    

31-Dec      $1070

balance    $10,300  + $1070    

Balance    $11370

 

Final answer:

The question concerns an accounting adjustment of Unearned Revenue, which occurs when a service paid for in advance has been completed. This kind of adjustment involves moving a specified amount from 'Unearned Revenue' to 'Service Revenue'. In this example, that amount is $1,070.

Explanation:

The adjustment being referred to in this scenario would be for Unearned Revenue. Unearned revenue, also known as deferred revenue, refers to payments received by a company for goods or services that have yet to be provided. In this instance, the service was paid for six months earlier but has just been completed. Therefore, an adjustment must be made to move the $1,070 from Unearned Revenue (a liability account) to the Service Revenue (an income statement account).

The entries will be as follows:
Debit (decrease) Unearned Revenue - $1,070.
Credit (increase) Service Revenue - $1,070.

So after this adjustment, the balances in the accounts would be,
Service Revenue unadjusted balance as of December 31, would be $11,370 ($10,300 + $1,070).
The Unearned Revenue balance as of December 31, would be $10,530 ($11,600 - $1,070).

Learn more about Unearned Revenue Adjustment here:

https://brainly.com/question/30637807

#SPJ3

La Famiglia Pizzeria provided the following information for the month of October:
a. Sales are budgeted to be $157,000. About 85% of sales is cash; the remainder is on account.
b. La Famiglia expects that, on average, 70% of credit sales will be paid in the month of sale, and 28% will be paid in the following month.
c. Food and supplies purchases, all on account, are expected to be $116,000. La Famiglia pays 25% in the month of purchase and 75% in the month following purchase.
d. Most of the work is done by the owners, who typically withdraw $6,000 a month from the business as their salary. (Note: The $6,000 is a payment in total to the two owners, not per person.) Various part-time workers cost $7,300 per month. They are paid for their work weekly, so on average 90% of their wages are paid in the month incurred and the remaining 10% in the next month.
e. Utilities average $5,950 per month. Rent on the building is $4,100 per month.
f. Insurance is paid quarterly; the next payment of $1,200 is due in October.
g. September sales were $181,500 and purchases of food and supplies in September equaled $130,000.
h. The cash balance on October 1 is $2,147.
Required:
1. Calculate the cash receipts expected in October.
2. Calculate the cash needed in October to pay for food purchases.
3. Prepare a cash budget for the month of October.

Answers

Answer:

a

The cash receipts in October are as follows:

Cash Sales:

85% of $157,000

= 0.85 * $157,000

= $133,450

Payments on September credit sales:

$181,500 * 28% * (80 - 75)%

= $181,500 *0.28 * 15%

= $181,500 * 0.28 * 0.15

= $7,623

Payments on October credit sales** 16,485

$157,000 * 70% * (85 - 70)%

$157,000 * 0.7 * 15%

= $157,000 * 0.7 * 0.15

= $16,485

Total cash expected = $133,450 + $7,623 + $16,485 = $157,558

b.

Payments for food purchases is as follows:

September

($130,000 × 0.75) = $97,500

October

($116,000 × 0.25) = 29,000

Total cash needed for June = $97,500 + $29,000 = $126,500

c.

The inventory is as follows:

Beginning balance $2,147

Cash receipts $157,558

Cash available $159,705

The following items will be subtracted:

Food purchases $126,500

Shareholder's Dividend $6,000

Workers’ wages in September $730 ---- 10% of $7,300

Workers’ wages re: October $6,570 --- 90% of $7,300

Utilities $5,590

Insurance $1,200

Rent $4,100

Total disbursements $150,690

Ending balance

= $159,705 - $150,690

= $9,015

Final answer:

La Famiglia Pizzeria expects $149,935 in cash receipts for October, needs $29,000 to pay for food purchases, and a cash budget must include all expected cash inflows and outflows to determine the ending cash balance.

Explanation:

To calculate the cash receipts expected in October for La Famiglia Pizzeria, one must consider both the cash sales and the collections from sales on account. Given the sales are budgeted at $157,000 and 85% is in cash, the cash sales would be $157,000 × 85% = $133,450. The credit sales would be the remaining 15%, which is $157,000 × 15% = $23,550. Of the credit sales, 70% is expected to be collected in the same month, which amounts to $23,550 × 70% = $16,485. Therefore, the total cash receipts for October would be $133,450 (Cash Sales) + $16,485 (Collections from Credit Sales) = $149,935. To calculate the cash needed in October to pay for food purchases, consider that La Famiglia expects to make $116,000 of purchases on account, paying 25% in the month of purchase. Thus, cash needed for purchases in October would be $116,000 × 25% = $29,000. Creating a cash budget for October involves summarizing expected cash inflows and outflows. The beginning cash balance is $2,147, with expected cash sales and collections totaling $149,935. Cash outflows include food purchases ($29,000), salaries and wages to part-time workers (90% of $7,300), monthly withdrawals by the owners ($6,000), utilities ($5,950), rent ($4,100), and an insurance payment ($1,200). Total cash outflows are calculated by adding all these expenses. The ending cash balance will be the initial cash balance plus total cash inflows minus total cash outflows.

Use the appropriate command on a graphing utility to find the daily production level (to the nearest integer) at which the average cost per player is a minimum. What is the minimum average cost (to the nearest cent)?

Answers

Answer:

39: $182.46

Explanation:

In this problem, the daily production level at the lowest average cost per player and the average cost (in $) can be estimated by considering the graph (average cost (y) against production level (x)) in the previous question. By drawing the graph up to scale, it can be deduced from the graph that the lowest average cost is approximately $182.46 and the production level at that point is 39.

please find the answer below

The University of Chicago Press is wholly owned by the university. It performs the bulk of its work for other university departments, which pay as though the press were an outside business enterprise. The press also publishes and maintains a stock of books for general sale. The press uses normal costing to cost each job. Its job-costing system has two direct-cost categories (direct materials and direct manufacturing labor) and one indirect-cost pool (manufacturing overhead, allocated on the basis of direct manufacturing labor costs). The following data (in thousands) pertain to 2014:

Direct materials and supplies purchased on credit $800

Direct materials used 710

Indirect materials issued to various production departments 100

Direct manufacturing labor 1,300

Indirect manufacturing labor incurred by various production departments 900

Depreciation on building and manufacturing equipment 400

Miscellaneous manufacturing overhead incurred by various production departments (ordinarily detailed as repairs, photocopying, utilities, etc.) 550


Manufacturing overhead allocated at 160% of direct manufacturing labor costs?

Cost of goods manufactured 4,120

Revenues 8,000

Cost of goods sold (before adjustment for under- or over-allocated manufacturing overhead) 4,020

Inventories, December 31, 2013 (not 2014): Materials Control 100 Work-in-Process Control 60 Finished Goods Control 500

1. Prepare an overview diagram of the job-costing system at the University of Chicago Press.

2. Prepare journal entries to summarize the 2014 transactions. As your final entry, dispose of the year-end under- or over-allocated manufacturing overhead as a write-off to Cost of Goods Sold. Number your entries. Explanations for each entry may be omitted.

3. Show posted T-accounts for all inventories, Cost of Goods Sold, Manufacturing Overhead Control, and Manufacturing Overhead Allocated.

4. How did the University of Chicago Press perform in 2014?

Answers

Answer:(1) in the diagram, the manufacturing overhead is from indirect cost pool, direct manufacturing labour cost is from under cost allocation base,indirect and direct cost is from under cost object and direct materials and direct manufacturing labour is from under direct cost (2) journal entry total Dr : $25,060, Cr total $25,060 (3) materials inventory controlbalance c/d $90, work in process inventory control balance c/d $2,050, finished good inventory control balance c /d $600 (4) The university of Chicago press performed well in the period under review

Explanation:

Indirect cost pool. Manufacturing overhead

|

Cost Allocation Base. Direct manufacturing

Labour cost

|

Cost object. Allocated manufacturing overhead cost

Direct cost

|

Direct cost. Direct materials, Direct manufmanufacturing Labour

In this diagram, the manufacturing overhead is from indirect cost pool, direct manufacturing labour cost is from under cost allocation base, indirect and direct cost is from under cost object and direct manufacturing labour is from under direct cost

(2)

Journal entry will be

Dr: materials inventory control $800, Cr : Account payable control to record purchase of direct materials $800

Dr : work in process inventory control $710, manufacturing overhead $100, Cr: materials inventory control $810

Dr: work in process inventory control $1,300, manufacturing overhead control $900,Cr : wages payable $2,200 to record manufacturing labour

Dr: Manufacturing overhead control $400,Cr : Accumulated depreciation building and manufacturing equipment $400 to record depreciation of building and equipment

Dr: Manufacturing overhead control $550,Cr : miscellaneous account $550 to record miscellaneous factory overhead

Dr: work in process inventory control $2,080, Cr : Applied manufacturing overhead $2,080 to assign manufacturing overhead to work in process based on direct manufacturing labour

Dr:Finished goods inventory control $4,120,Cr: work in process control $4,120

Dr: Account Receivable inventory control or cash $8,000, Cr : Sales revenue $8,000 to record sales revenue

Dr: Cost of good sold $4,020, Cr: Finished good Inventory control $4,020 to record the cost of good sold

Dr: Applied manufacturing overhead $2,080, Cr: manufacturing overhead control $1,950, cost of good sold $130 to adjust for over application of manufacturing overhead

(3) The T Account is as follows

Materials inventory control

Dr. Cr

$ $

Material control 100. Materials inventory 810

Direct materials purchase 800. Balance c/d 90

----------- -----------

900. 900

--------------- ---------------

Work in process inventory control

Dr. Cr

$ $

Work in process control 60. Finished good Inventory 4,120

Work in process inventory control 710

Direct materials Labour. 1,300

Balance c/d 2,050

------------- -------------

4,120. 4,120

--------------- ----------------

Finished good Inventory control

Dr. Cr

$ $

Finished good control 500. Under or over allocated overhead 4,020

Cost of good manufactured 4,120. Balance c/d 600

--------- -----------

4,620. 4,620

------------ --------------

(4) in the period under review, the university of Chicago performed well.

Here's an outline of the information and the steps to complete the task:

Overview of the job-costing system at the University of Chicago Press:

Direct costs:

Direct materials and supplies

Direct manufacturing labor

Indirect costs:

Manufacturing overhead (allocated on the basis of direct manufacturing labor costs)

Cost of goods manufactured:

Beginning work-in-process inventory

Direct materials used

Direct manufacturing labor

Manufacturing overhead applied

Less: Ending work-in-process inventory

Cost of goods sold:

Beginning finished goods inventory

Cost of goods manufactured

Less: Ending finished goods inventory

Journal entries to summarize the 2014 transactions:

Record the purchase of direct materials and supplies on credit:

Debit: Direct materials and supplies (800)

Credit: Accounts payable (800)

Record the use of direct materials:

Debit: Work-in-process control (710)

Credit: Materials control (710)

Record the issuance of indirect materials to various production departments:

Debit: Other manufacturing overhead (100)

Credit: Materials control (100)

Record the incurrence of direct manufacturing labor:

Debit: Work-in-process control (1,300)

Credit: Manufacturing wages payable (1,300)

Record the incurrence of indirect manufacturing labor:

Debit: Other manufacturing overhead (900)

Credit: Manufacturing wages payable (900)

Record the depreciation on building and manufacturing equipment:

Debit: Other manufacturing overhead (400)

Credit: Accumulated depreciation (400)

Record the incurrence of miscellaneous manufacturing overhead:

Debit: Other manufacturing overhead (550)

Credit: Accounts payable (550)

Allocate manufacturing overhead at 160% of direct manufacturing labor costs:

Debit: Work-in-process control (2,080)

Credit: Other manufacturing overhead (2,080)

Close the Work-in-Process Control account to the Finished Goods Control account:

Debit: Finished goods control (1,970)

Credit: Work-in-process control (1,970)

Close the Cost of Goods Manufactured account to the Finished Goods Control account:

Debit: Finished goods control (2,150)

Credit: Cost of goods manufactured (2,150)

Record the cost of goods sold:

Debit: Cost of goods sold (4,020)

Credit: Finished goods control (4,020)

Dispose of the year-end under- or over-allocated manufacturing overhead as a write-off to Cost of Goods Sold:

Debit: Cost of goods sold (130)

Credit: Manufacturing overhead applied (130)

These journal entries provide a comprehensive overview of the University of Chicago Press's job-costing system and summarize the 2014 transactions accurately.

Read more about journal entries here:

https://brainly.com/question/28390337

#SPJ3

(a) Fully depreciated equipment costing $60,000 was scrapped, no salvage, and new equipment was purchased for $183,200. (b) Bonds payable for $100,000 were retired by payment at their face amount. (c) 5,000 shares of common stock were issued at $13 for cash. (d) Cash dividends declared and paid, $25,000. Prepare a statement of cash flow, using the indirect method of reporting cash flows from operating activities

Answers

Final answer:

The Statement of Cash Flows captures the cash transactions for equipment scrapping (non-effective), bond retirement (-$100,000), stock issuance (+$65,000), and dividends (-$25,000). The net cash flow from financing activities is calculated as -$60,000, an outflow. Note that operating and investing activities are not included due to lack of information.

Explanation:

Statement of Cash Flows Preparation

When constructing a statement of cash flows using the indirect method, we start with the net income and adjust it for non-cash transactions and changes in working capital. However, as a net income figure is not provided, we'll focus on the given cash flow information:

(a) Equipment with a cost of $60,000 was scrapped with no salvage value. This transaction does not affect the cash flow because the equipment was fully depreciated.(b) $100,000 in bonds payable were retired at face value. This is a cash outflow under financing activities and would be recorded as a decrease of $100,000.(c) 5,000 shares of common stock were issued at $13 per share for cash, resulting in a cash inflow of $65,000 under financing activities.(d) Cash dividends of $25,000 were declared and paid, which is a cash outflow under financing activities.

Calculation of Cash Flow from Financing Activities


Proceeds from issuing common stock: $13/share × 5,000 shares = $65,000 (Inflow)


Payment to retire bonds: -$100,000 (Outflow)


Dividends paid: -$25,000 (Outflow)

Net cash flow from financing activities: $65,000 - $100,000 - $25,000 = -$60,000 (Outflow)

Note: Since no beginning cash balance or other operating or investing cash flows are given, we have limited information and only show the cash flows from financing activities.

On January 1, 2020, Carter Company makes the two following acquisitions. 1. Purchases land having a fair value of $200,000 by issuing a 5-year, zero-interest-bearing promissory note in the face amount of $337,012. 2. Purchases equipment by issuing a 6%, 8-year promissory note having a maturity value of $250,000 (interest payable annually). The company has to pay 11% interest for funds from its bank. (a) Record the two journal entries that should be recorded by Carter Company for the two purchases on January 1, 2020. (b) Record the interest at the end of the first year on both notes using the effective-interest method.

Answers

Carter Company recorded two journal entries on January 1, 2020. The first entry was for the acquisition of land using a promissory note, and the second entry was for the acquisition of equipment using a promissory note. Both entries include discounts on the notes payable.

On January 1, 2020, Carter Company made two acquisitions. The first acquisition was the purchase of land with a fair value of $200,000 by issuing a 5-year, zero-interest-bearing promissory note with a face amount of $337,012. To record this acquisition, Carter Company would make the following journal entry:

Debit Land $200,000Credit Notes Payable $337,012Credit Discount on Notes Payable $137,012 ([$337,012 - $200,000])

The second acquisition was the purchase of equipment by issuing a 6%, 8-year promissory note with a maturity value of $250,000. To record this acquisition, Carter Company would make the following journal entry:

Debit Equipment $250,000Credit Notes Payable $250,000Debit Interest Expense $13,125 ([$250,000 x 6%])Credit Discount on Notes Payable $113,125 ([$250,000 - $136,875])

For more questions on Entries

https://brainly.com/question/32283266

#SPJ3

Final answer:

To record the land and equipment acquisitions on January 1, 2020, Carter Company would make two journal entries. They would also record the interest at the end of the first year using the effective-interest method.

Explanation:

To record the two purchases on January 1, 2020, Carter Company would make the following journal entries:

a) Land acquisition:

Debit: Land $200,000Credit: Notes Payable $337,012

b) Equipment acquisition:

Debit: Equipment $250,000Credit: Notes Payable $250,000

To record the interest at the end of the first year on both notes using the effective-interest method:

a) Interest on land note:

Debit: Interest Expense $16,851 ($337,012 x 11% x 1/12)Credit: Notes Payable $16,851

b) Interest on equipment note:

Debit: Interest Expense $15,000 ($250,000 x 6% x 1)Credit: Notes Payable $15,000

The future of cities in the United States and in other countries will be determined by their ability to benefit from the _________________ and to minimize or counterbalance the ______________________.

Answers

Answer:

The correct answer is letter "B": Economies of agglomeration; corresponding diseconomies.

Explanation:

Economies of agglomeration refer to a type of economy in which companies are located one close to another to take advantage of their core competencies. This economic structure typically helps businesses to reduce relocation and delivery costs increasing their profits but in some other cases, the costs could increase if some of the firms lost their economies of scale.

Thus, metropolises in the U.S. must find ways to boost the benefit of economies of agglomeration minimizing the negative effects of the diseconomies of scale in which some firms might fall.

The future of cities in the United States and in other countries will be determined by their ability to benefit from the economies of scale and to minimize or counterbalance the negative externalities.

 The term economies of scale refers to the cost advantages that enterprises obtain due to size, output, or scale of operation, with cost per unit of output generally decreasing with increasing scale as fixed costs are spread out over more units of output.

Cities can benefit from economies of scale in various ways, such as through more efficient public transportation systems, better use of infrastructure, and a larger pool of human capital.

These benefits can lead to increased productivity and economic growth, which are crucial for the future development of cities.

The future of cities is likely to be shaped by how effectively they can harness the advantages of being large population centers while also addressing and mitigating the adverse effects that come with urbanization.

By doing so, cities can become more sustainable, livable, and economically vibrant places.

Identify whether the statements are true or false by dragging and dropping the appropriate term into the bin provided. Long-run economic growth is unlikely to be sustainable because of finite natural resources. In the modern economy, countries that possess few domestic natural resources essentially have no chance to develop economically. Finding alternatives to natural resources will be very important to long-term economic growth. In the modern economy, human and physical capital are generally less important in productivity than natural resources. In the 19th century, countries with the highest per capita GDP were nearly always abundant in minerals and productive farming land.

Answers

Answer: Explanation:

Long run economic growth is unlikely to be sustainable because of finite natural resources.  Answer: False

In the modern economy, countries that possess few domestic natural resources essentially have no chance to develop economically.  - False

Finding alternatives to natural resources will be very important to long-term economic growth.  - True

In the modern economy, human and physical capital are generally less important in productivity than natural resources.  - False

In the 19th century, countries with the highest per capita GDP were nearly always abundant in minerals and productive farming land.  - True

Suppose an economist tests the theory that when the price of leather increases, fewer pairs of shoes are produced. He observes more shoes being produced when the price of leather increases. At the same time, a new production technology allowed for more shoes to be produced in less time.
He:

a. has confused association and causation.
b. cannot test his theory because his observations violate the ceteris paribus assumption.
c. used normative economics to answer a positive question.
d. built a model with too many variables.

Answers

Answer:

b. cannot test his theory because his observations violate the ceteris paribus assumption

Explanation:

As per the law of supply, when price of an input rises, quantity supplied of a good falls, keeping other factors affecting supply as constant (ceteris paribus).

Leather and Shoes are complimentary goods in the sense that leather serves as an input for the product i.e shoes. So if the price of leather rises, production of shoes would fall, keeping other factors constant.

When the price of an input rises, the quantity supplied falls, keeping other factors affecting supply as constant.

In the given case, the price of inputs has increased and yet the production of shoes has increased owing to an advancement in the technology. Technology is a different determinant of quantity supplied and considered as an other factor affecting supply.

Final answer:

The economist's observations were affected by an unnoticed variable - the new production technology. Therefore, the economist could not accurately test his theory about the relationship between the price of leather and shoe production due to violating the ceteris paribus assumption.

Explanation:

The economist in your question is trying to test the theory that when the price of leather increases, fewer pairs of shoes are produced. However, he observes the opposite. He observes an increase in shoe production when the price of leather increases. His observations may not necessarily be incorrect, but he has failed to consider a critical assumption in economics, called the ceteris paribus assumption.

This assumption implies that 'all other things being equal.' In reality, the economist identified that a new production technology was introduced which allows for more efficient production. Therefore, when trying to assess the impact of leather price increases on shoe production, not all things remain unchanged. As a result, the correct answer to your question would be: b. he cannot test his theory because his observations violate the ceteris paribus assumption.

Learn more about Ceteris paribus here:

https://brainly.com/question/32263743

#SPJ3

If current output is $40b less than Potential GDP, how much would congress need to decrease taxes by to correct this short-run economic fluctuation given that the MPC is 0.75?

Answers

Answer:

Reduction in Tax Needed = $ 13.33

Explanation:

Tax Multiplier shows magnitude of change (decrease) in income due to tax change (rise) .

Tax Multiplier = ΔY / ΔT = - MPC / (1- MPC)

Given : Change in Income needed [ΔY] = 40

MPC = 0.75

Putting in formula ;

40 / ΔT  = - 0.75 / (1- 0.75)

40 / ΔT = - 0.75 / 0.25

40 / ΔT  =  - 3

ΔT = - 40/ 3

ΔT = - 13.33

The congress will need to decrease the taxes by $13.33 billion to correct the short-run economic fluctuation.

Here, we will determine the how much of tax collection need to be reduced to correct the short-run economic.

Given Information

Current output = $40 billion < Potential GDP

MPC = 0.75

The tax multiplier shows the magnitude of changes (decrease) in income because of tax change (rise).

The Formula of Tax Multiplier = {ΔY / ΔT = - MPC / (1- MPC)}

40 / ΔT  = -0.75 / (1 - 0.75)

40 / ΔT = -0.75 / 0.25

40 / ΔT  =  -3

ΔT = -40/ 3

ΔT = -13.33

So, the congress will need to decrease the taxes by $13.33 billion to correct the short-run economic fluctuation.

See similar solution here

brainly.com/question/14194376

Adams Enterprises’ noncallable bonds currently sell for $1,120. They have a 15-year maturity, an annual coupon of $85, and a par value of $1,000. What is their yield to maturity? 5.84% 6.15% 6.47% 6.81% 7.17%

Answers

Answer: 7.17%

Explanation:

Given,

YTM = ?

Annual Coupon, C = $85

Par Value, F = $1000

Current Bond Price, p = $1120

Maturity Year, n = 15

The yield to maturity is 7.17% from the data given in the question above. We will use the yield to maturity formula which stated as YTM = C + [(F-P)/n] / [(F+P)/2] where YTM is the yield to maturity,

C is the annual coupon,

F is the par value,

p is the current bond price, and

n is the maturity year.

YTM = 85 + [(1000-1120)/15] / [(1000+1120)/2]

YTM = 7.17%

You have deposited $96,780 into an account that will earn an interest rate of 15% compounded semiannually. How much will you have in the account by the end of 14 years?

Answers

Answer:

After 14 years, the compounded value of the invested amount = $733,200.27

Explanation:

What the question is asking us to find is the future value of an amount that is invested over a period of 14 years, compounded at 15% semiannually.

The formula is:

[tex]FV= PV(1 + \frac{i}{n} )^{nt}[/tex]

where ;

FV = Future value

PV = present value (principal)

i = nominal interest

n = compounding frequency in a year

t = total number of years.

Note: for investments that are compounded annually, n = 1, because compounding is once in a year, for those compounded semiannually, n=2, because compounding is twice in a year, for compounding done quarterly, n = 4 because there are four quarters in a year and so on.

Putting, the values into the equation above;

[tex]FV=PV(1 + \frac{r}{n}) ^{nt} \\[/tex]

[tex]= 96,780(1 + \frac{0.15}{2} )^{(2*14)} = 96,780 (1 + 0.075)^2^8\\ = 96,780 (7.5759882436) = 733,200.27[/tex]

= $733,200 (to the nearest dollar)

Up-Town Express processed 89,233 packages this month. If this is 36.5% less than last month, how many packages did they process last month?A) 30,997

B) 38,567

C) 140,524

D) 130,230

Answers

Answer:

X=140.524.4≅140,524 Packages

Correct option is C (140,524)

Explanation:

Given Data:

Up-Town Express processed =89,233 packages this month

Less than last month=36.5%=0.365

Required:

Packages did they process last month=?

Solution:

Let say X is the number of Packages they process last month.

Equation from above data:

89233+0.365X=X

89233=X-0.365X

0.635X=89233

X=89233/0.635

X=140.524.4≅140,524 Packages

Correct option is C (140,524)

The number of packages Up-Town Express processed last month, we calculated the original amount before a 36.5% decrease that resulted in 89,233 packages this month. The calculation shows that last month, they processed option C. 140,524 packages.

To calculate the number of packages Up-Town Express processed last month given that they processed 89,233 packages this month, which is 36.5% less than last month.

To find the original number of packages processed last month, we can see this situation as a percentage decrease problem.

As 89,233 is 63.5% (100% - 36.5%) of the previous month's amount, we can set up a proportion to solve for the original amount.

Let x be the number of packages processed last month. So we have:

63.5% of x = 89,233 packages

To convert 63.5% to a decimal, we divide by 100: 63.5% = 0.635

Therefore:

0.635 × x = 89,233

To find x, divide both sides by 0.635:

x = 89,233 / 0.635

x = 140,524 packages

So the correct answer is C) 140,524, representing the number of packages processed by Up-Town Express last month.

The R&R Company's production costs for August are: direct labor, $13,000; indirect labor, $6,500; direct materials, $15,000; property taxes on production equipment, $800; heat, lights and power, $1,000; and insurance on plant and equipment, $200. R&R Company's factory overhead incurred for August is:

A-$2,000.
B-$6,500.
C-$8,500.
D-$21,500.
E-$36,500.

Answers

Answer:

The factory's overhead cost is $8,500

Explanation:

First, you have to know what an overhead cost is; An overhead cost is the cost incurred in production that is not direct labor, direct material cost or all direct expenses on production. In this case, let us identify all the direct costs involved in production;

indirect labor = $6,500

property taxes on production = $800

heat, light and power = $1,000

insurance on plant equipment = $200

Therefore, total overhead cost = 6,500 + 800 + 1,000 + 200 =  $8,500.

What is the maximum amount of write-downs (defaults) the bank could sustain without becoming insolvent (bankrupt)? Values are millions of dollars. Assets Liabilities Reserves $60 Transaction Deposits $500 Bonds $400 CDs $300 Loans $600 Equity _____

Answers

Answer:

The Equity for the bank will be $260

Explanation:

Assets of the banks are

Reserve = $60

Bond = $400

Loans = $600

Total Asset = $1,060

Liabilities of the banks are

Deposit = $500

CD's: = $300

Total Liabilities = $800

Equity = Asset - Liabilities

Equity = $1,060 - 800

Equity = 260

The maximum amount of the bank to sustain without becoming insolvent their Equity is $260

Under what conditions could a company artificially increase their current ratio at the end of their accounting reporting period by taking out a short term loan and placing the proceeds in the cash account

Answers

Answer:

1) Prompt Submission of invoice

2) Removal of unnecessary assets

3) Bargain for a longer payment period

Explanation:

Current ratio measures the capability of a business or organisation to meet up to its short-term obligations that are due within a period of one year.

Conditions in which a company can increase its current ratio at the end of their accounting period include:

A) Prompt invoice submission:

Invoice should be submitted early to the customers. The more your accounts receivables increase and the quicker money is derived from your sales,the better your current ratio be and you will have much more money.

B) Removal of unnecessary assets:

All business has unproductive assets. Resources that are just lying there and wasting,resources that is not earning anything. It is advisable to dispose them off since they are not adding to your income.

C) Bargain for longer payment period:

Try and negotiate for a longer payment periods with your vendors and ask if you can be given discounts.

Universal Containers (UC) wants its closed Won opportunities to be synced to a Data warehouse in near real time. UC has implemented Outbound Message to enable near real- time data sync. UC wants to ensure that communication between Salesforce and Target System is secure. What certificate is sent along with the Outbound Message?a) The default client Certificate or the Certificate and Key Management menu.b) The CA-signed Certificate from the Certificate and Key Management Menu.c) The default client Certificate from the Develop--> API menu.d) The Self-signed Certificates from the Certificate & Key

Answers

Final answer:

The certificate sent along with the Outbound Message to ensure secure communication between Salesforce and the Target System is the default client Certificate or the chosen one from the Certificate and Key Management menu.

Explanation:

When Universal Containers (UC) wants to securely communicate between Salesforce and their Target System using Outbound Message integration, UC needs to ensure the correct certificate is used. The certificate that is sent along with the outbound message is a) The default client Certificate or the Certificate and Key Management menu.

This option provides UC with the ability to use their default client certificate or select another from the Certificate and Key Management menu, ensuring the secure communication between Salesforce and the Target System.

It's essential for UC to manage these certificates effectively to ensure the sensitive data contained within the exchanges are secure and the data integrity is maintained. Hence, it's crucial to select the appropriate certificate when setting up the Outbound Message configuration.

Learn more about Outbound Message here:

https://brainly.com/question/30880749

#SPJ12

Charlie Corporation's adjusted trial balance included the following items (all account balances are normal): Accounts payable $65,000, Accounts receivable $33,000, Capital stock $100,000, Cash $50,000, Dividends $10,000, Goodwill $47,000, Interest expense $4,000, Interest payable $2,000, Inventory $36,000, Notes payable $80,000, Prepaid expenses $5,000, Property, plant & equipment $123,000, Retained earnings $46,000, Rent expense $18,000, Revenues $101,000, and Salary expense $60,000. How much are total assets?

Answers

Answer:

$294,000

Explanation:

Asset are resources controlled and owned by a company from which future economic benefits will flow to the entity.

Asset may be current or non current based on how soon they can be realized. Assets usually have debit balances and it is an element of the balance sheet.  Examples of assets include Accounts receivable, cash, land, equipment, prepayments, Inventory etc.

Total Assets

= $33,000 + $50,000 + $36,000 +$5,000 + $123,000 + $47,000

= $294,000

Beginning inventory $ 34,000 Inventory purchases (on account) 164,000 Freight charges on purchases (paid in cash) 19,000 Inventory returned to suppliers (for credit) 21,000 Ending inventory 39,000 Sales (on account) 259,000 Cost of inventory sold 157,000 Required: Applying both a perpetual and a periodic inventory system, prepare the journal entries that summarize the transactions that created these balances. Include all end-of-period adjusting entries indicated.

Answers

Answer:

Journal entries - Perpetual inventory system

Inventory purchases (on account) 164,000

Inventory $ 164000(debit)

Trade Payables $ 164000 (credit)

Freight charges on purchases (paid in cash) 19,000

Freight Charges $ 19000 (debit)

Bank $19000 (credit)

*****Freight Charges forms part of cost of Inventory (IAS 2) therefore write off freight cost to Inventory Account****

Inventory $19000 (debit)

Freight Charges $ 19000 (credit)

Inventory returned to suppliers (for credit) 21,000

Trade Payable $ 21000 (debit)

Inventory $21000(credit)

Sales (on account) 259,000,

Trade Receivables $ 259000 (debit)

Revenue $259000(credit)

Cost of inventory sold 157,000

Cost of Sales $157000 (debit)

Inventory $157000 (credit)

Journal entries - Periodic inventory system

Inventory purchases (on account) 164,000

Inventory $ 164000(debit)

Trade Payables $ 164000 (credit)

Freight charges on purchases (paid in cash) 19,000

Freight Charges $ 19000 (debit)

Bank $19000 (credit)

*****Freight Charges forms part of cost of Inventory (IAS 2) therefore write off freight cost to Inventory Account****

Inventory $19000 (debit)

Freight Charges $ 19000 (credit)

Inventory returned to suppliers (for credit) 21,000

Trade Payable $ 21000 (debit)

Inventory $21000(credit)

Sales (on account) 259,000,

Trade Receivables $ 259000 (debit)

Revenue $259000(credit)

Cost of inventory sold 157,000

Cost of Sales $157000 (debit)

Inventory $157000 (credit)

Explanation:

Inventory purchases (on account) 164,000

Recognise an Asset - Inventory and a liability - Account payable

Freight charges on purchases (paid in cash) 19,000

Recognise an expense - Freight Charges and de-recognise asset - Bank

*****Freight Charges forms part of cost of Inventory (IAS 2) therefore write off freight cost to Inventory Account****

Derecognise expense- Freight and recognise an asset - Inventory

Inventory returned to suppliers (for credit) 21,000

De-recognise Asset - Inventory and De-recognise Liability - Account Payable

Sales (on account) 259,000,

Recognise Asset - Trade Receivable and Recognise Revenue

Cost of inventory sold 157,000

Recognise expense - Cost of Sale in Profit and Loss and De-recognise Asset- Inventory

Howard, a salesperson for Kemco Sanitation Systems, told a purchasing agent, "Our new system can save your company $60,000 annually in energy, chemicals, and water use compared to the type of sanitation system you're using now." Howard's statement reflects _____ in this scenario.

Answers

Answer:

Benefits.

Explanation:

Benefits are what a person or group stand to gain by using a product or engaging in a process. It is different from the features of the product in that it focuses on what the consumer stands to gain from the use of various features of the product.

Howard told a purchasing agent, "Our new system can save your company $60,000 annually in energy, chemicals, and water use compared to the type of sanitation system you're using now."

Howard is focusing on the benefits to the client's company to get his buy in.

Answer: Benefits

Explanation: Benefits is defined as anything that proffers an advantage or profit to someone while minimizing wastage or loss. They are what a consumer hopes to get, feel or achieve when he/she uses a product; benefits also describes the qualities a product offers to satisfy the needs, desires and wants of its users. By highlighting the qualities of the product or system that the purchasing agent might find useful, Howard, the sales person's, statement reflects benefits.

On January 1, 2017, Eagle borrows $23,000 cash by signing a four-year, 9% installment note. The note requires four equal payments of $7,099, consisting of accrued interest and principal on December 31 of each year from 2017 through 2020. (Round your intermediate calculations and final answers to the nearest dollar amount.) Prepare the journal entries for Eagle to record the loan on January 1, 2017, and the four payments from December 31, 2017, through December 31, 2020.

Answers

Answer:

                                          Dr.                   Cr.

January 1, 2017

Cash                                $23,000

Account Payable                                    $23,000

December 31, 2017

Account Payable            $5,029

Interest Expense            $2,070

Cash                                                        $7,099

December 31, 2018

Account Payable            $5,482

Interest Expense            $1,617

Cash                                                        $7,099

December 31, 2019

Account Payable            $5,975

Interest Expense            $1,124

Cash                                                        $7,099

December 31, 2020

Account Payable            $6,514

Interest Expense            $585

Cash                                                        $7,099

Explanation:

Installment of $7,099 is divided in interest and principal payments. As Interest payment is decreasing with the balance due is reducing each year due to principal payment with interest payment after paying interest the loan amount is zero after 4th installment. Loan Amortization schedule shows the amortization of loan and interest payment each year and their balances.

                       Loan Amortization schedule

Date                        Opening   Interest @ 9%   Principal    Balance

January 1, 2017      $23,000                                                  $23,000

Dec 31, 2017          $23,000      $2,070           $5,029       $17,971

Dec 31, 2018          $17,971        $1,617              $5,482       $12,489

Dec 31, 2019          $12,489       $1,124              $5,975       $6,514

Dec 31, 2020         $6,514          $585              $6,514        $0

A common excuse for carrying out a morally questionable project is, "If I don’t do it somebody else will." This rationale may be tempting for engineers who typically work in situations where someone else might be ready to replace them on a project.
Do you view it as a legitimate excuse for engaging in projects that might be unethical? In your answer, comment on the concept of responsible conduct developed in this section.

Answers

Answer:

It is not a legitimate excuse for engaging in unethical projects

Explanation:

Ensuring scientific integrity and avoiding professional misconduct is a collective role of Scientists and Engineers. Every professional, engineers inclusive, must ensure they stay committed and faithful to the oath of practice they have sworn to. Engineering is an important and learned profession. As members of this profession, engineers are expected to exhibit the highest standards of honesty and integrity.  Engineers must perform under a standard of professional behavior that requires adherence to the highest principles of ethical conduct.

Every engineer must be familiar with the code of ethics of the profession, abide by it, and report erring professionals for punitive measures to be taken rather than giving excuses for carrying out an unethical project.

The concept of responsible conduct emphasizes ethical decision making, professional responsibilities, and strict adherence to professional standards and values. Every engineer and professional must take into cognizance all the responsible conducts required by their professions

Engaging into projects that are unethical is not a legitimate excuse as it is against work ethics. Every employee should adhere to high ethical standards. Thus, these are part of responsible conduct.

What do understand by responsible conduct?

The concept of responsible conduct focuses on ethical decision-making, professional obligations, and strict adherence to professional standards and values. All engineers and technicians should consider all the ethics required by their profession.

Ensuring scientific integrity and avoiding professional misconduct is a fundamental role of Scientists and Engineers. All professionals, including engineers, must make sure that they stay committed to their work and to the vows they have made.

Every engineer should familiarize himself with the code of conduct, adhere to it, and report any misconduct to the professional rather than giving excuses for doing wrong.

Engineers and technicians should follow the required code of conduct and ethical standards and be an example for society and for future generations.

Hence, it is not a legitimate excuse to engage in projects that might be unethical.

To learn more about responsible conduct, refer to the link:

https://brainly.com/question/24606527

Select the correct adjective or adverb in the following sentences.

Briana is a typist.

I’ve asked Taneesha to give the team a explanation of the mail merge procedure.

His rise to the top of corporate America was a ascent.

I was advised to read the Johnson expense report.

I do not like the carpet in my office.

Walk when you pass cubicles where people are working.

I can’t believe she is going to work for him.

We are done with this project.

Our new manager is a woman.

The presentation on the increase in business overseas was , but the speaker didn’t mention how our company was doing.

Answers

Final answer:

The question is asking for proper adjectives and adverbs to complete the sentences. The suggested words describe the sentences accurately and provide additional information to them.

Explanation:

The question is asking you to fill in the blanks in the sentences with appropriate adjectives or adverbs. Here are my suggestions:

Briana is a fast typist.I’ve asked Tanisha to give the team a detailed explanation of the mail merge procedure.His rise to the top of corporate America was a meteoric ascent.I was advised to carefully read the Johnson expense report.I do not like the gloomy carpet in my office.Walk quietly when you pass cubicles where people are working.I can’t believe she is actually going to work for him.We are almost done with this project.Our new manager is a competent woman.The presentation on the increase in business overseas was informative, but the speaker didn’t mention how our company was doing.

Learn more about adjectives and adverbs

https://brainly.com/question/31883559

#SPJ3

Bridgeport Company sold $8,780 of its specialty shelving to Elkins Office Supply Co. on account. Bridgeport estimates that an additional $215 in allowances will be granted to Elkins. Prepare the entries when (a) Bridgeport makes the sale. (If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts. Credit account titles are automatically indented when the amount is entered. Do not indent manually.) (b) Bridgeport grants an allowance of $722 when some of the shelving does not meet exact specifications but still could be sold by Elkins. (If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts. Credit account titles are automatically indented when the amount is entered. Do not indent manually.) (c) at year-end. (If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts. Credit account titles are automatically indented when the amount is entered. Do not indent manually.)

Answers

Answer:

Statement is given below.

Explanation:

Prepare the necessary journal entries as shown below:

Date Accounts Title and Explanation             Ref.      Debit      Credit

a Accounts Receivable                                               $ 8:780

Sales Revenue                                                                            $ 8380

(To record the sales made on account)

Sales Returns and Allowances                                   $  215

Provision for Sales Return and Allowances                                 $ 215

vTo record the estimated allowance on sales

b Sales Returns and Allowances ($722-$215)              $ 507

Provision for Sales Return and Allowances                  $ 215

Accounts Receivable                                                                       $ 722

(To record the allowance granted towards sales

returns)

c No entry

(Since the cash is not received and hence no

adjustment needed)

The sale of shelving is recorded by debiting Accounts Receivable and crediting Sales Revenue. An allowance is recorded by debiting Sales Returns and Allowances and crediting Accounts Receivable. At the year-end, an entry may be needed if additional allowances are anticipated.

When Bridgeport Company makes the sale of specialty shelving worth $8,780 to Elkins Office Supply Co., the corresponding accounting entries are as follows:

Debit Accounts Receivable for $8,780.

Credit Sales Revenue for $8,780.
Upon granting an allowance of $722 when some shelving does not meet specifications, the entries are:

Debit Sales Returns and Allowances for $722.Credit Accounts Receivable for $722.

Lastly, at year-end, if the previously estimated allowance of $215 has not been granted, no additional entry is needed beyond the $722 actual allowance already recorded. If Bridgeport still anticipates granting the additional $215 allowances, it would make the following entry:

Debit Sales Returns and Allowances for $215.Credit Allowance for Sales Returns and Allowances (a contra account to Accounts Receivable) for $215.

You are the supervisor of an employee who just learned that she did not receive the promotion she had anticipated. You call her into your office and ask her to discuss her reaction. What type of listening are you engaged in?
a. Casual listening
b. Listening for information
c. Intensive listening
d. Empathetic listening

Answers

Answer:

The correct answer is letter "D": Empathetic listening.

Explanation:

Empathetic listening is used in cases when people must be heard more than in a situation when two parties want to come up to a solution. Empathetic listening goes beyond active listening because it requires the listening party to put in the other party's shoes. Most often, empathetic listening has the mission of deeply understanding others' points of view.

Zapato Company produces two types of boots: vaquero and vaquera. There are four activities associated with the two products. Drivers for the four activities are as follows:

Vaquero Vaquera
Cutting hours 4,000 5,400
Assembly hours 2,850 4,650
Inspection hours 945 2,430
Rework hours 150 450

Required:
Calculate the consumption ratios for the four drivers. Round your answers to two decimal places.

Activity Driver Vaquero Vaquera
Cutting hours
Assembly hours
Inspection hours
Rework hours

Answers

Answer:

Attached is the complete questions containing the missing variables:

The activity rates for each activity are stated thus:

Cutting activity rate =$24/cutting hour

Assembly activity rate =$40/ assembly hour

Inspecting activity rate =$20/ inspecting hour

Reworking activity rate=$75/reworking hour

Explanation:

Cutting activity rate =$225600/(4000+5400)=$24/cutting hour

Assembly activity rate =$300000/(2850+4650)=$40/ assembly hour

Inspecting activity rate=$67500/(945+2430)=$20/ inspecting hour

Reworking activity rate=$45000/(150+450)=$75/reworking hour

Obviously you did not include the overheads incurred for each activity in your question,but I have the overhead for each activity in the attached full question with which I computed the required overhead activity rates

Answer:

                                 Vaquero               Vaquera

Cutting hours            42.55%                  57.45%

Assembly hours        38%                       62%

Inspection hours      28%                         72%

Rework hours         25%                           75%

Explanation:

The question is incomplete, it does not have total capacity for the four activities available but i will assume that the activities maximize consumption and shares it amongst themselves hence to get the consumption ratio from their total.

cutting hours 4000+5400 = 9400

Assembly Hours 2850 + 4650= 7500

Inspection hours 945 + 2430= 3375

Rework hours 150 + 450 = 600

consumption ratio = capacity per activity / total capacity per total activities

An engineer who is now 65 years old began planning for retirement 40 years ago. At that time, he thought that if he had $1 million when he retired, he would have more than enough money to live his remaining life in luxury. Assume the inflation rate over the 40-year time period averaged a constant 4.1% per year.a) What is the CV purchasing power of his $1 million at age 65

Answers

Answer:

The CV purchasing power of his $1,000,000 at age 65 is $200,433.74

Explanation:

The constant-value (CV) purchasing power of the $1 million is calculated using the following formula:

Current dollars = Future dollars / (1 + f)^n where

f = average inflation rate = 4.1% per year = 0.041

n = time period = 40 years

Future dollars = $1,000,000

Substituting these values in the above formula:

Current dollars = $1,000,000 / (1 + 0.041)^40

                         = $1,000,000 / 4.989

                         = $200,433.74

Hence, the CV purchasing power of his $1,000,000 at age 65 is $200,433.74.

shows Cost of Sales of $74,000, Administrative Expenses of $20,000, Rental Expenses of $12,000, Interest Revenue of $33,000, Interest Expense of $15,000, and Net Income after Taxes of $60,000. Assuming there are no other items to be considered and that the Income Taxes are 25% of Net Income before Taxes, what is sales revenue

Answers

Answer:

The Sales Revenue is $168,000

Explanation:

As we know Net income before tax is calculated by deducting the cost of sales and other operating expenses from sales. We will add back all the expenses to reach at sales amount.

Net incomes before tax then divided into two portion Tax and net income after tax on the basis of tax percentage.

Net income before tax = Net income after tax + Tax

Net income before tax  = $60,000 + ( 60,000 x 25% / 75% ) = $60,000 + $20,000 = $80,000

Net income before tax  = Sales + other income - Cost of Sales - ( Operating Expenses)

$80,000 = Sales + $33,000 - $74,000 - ( $20,000 + $12,000 + $15,000 )

$80,000 = Sales - $41,000 - $47,000

$80,000 = Sales - $88,000

Sales = 80,000 + $88,000

Sales = $168,000

ABC has bonds outstanding that has 25 years left to maturity. The coupon rate is 9%, and coupons are paid semiannually. The bond is currently selling for $908.72 per $1,000 bond. What is the cost of debt

Answers

Answer:

The cost of debt is 10.04%

Explanation:

The cost of debt is also another way of a yield to maturity of a bond so therefore we will calculate the yield to maturity for the following problem to get the cost of debt therefore using the following formula:

Yield to maturity =[(face value/current value)(1/period to maturity)] -1

where the face value is $1000 the original bond price

current value is the value of the bond which is $908.72 which its currently selling for.

period to maturity is the period of which the bond took to mature which is not specified but we know a bonds price is valuated every year so it will be 1 year.

now we substitute to the above mentioned formula :

Yield to maturity = ($1000/$908.72)(1/1) - 1 then compute

Yield to Maturity = 0.1004489832 then we multiply by 100 for percentage

Yield to maturity = 10.04% rounded off to two decimal places,

we know the cost of debt is the interest rate at which entities pay over their loans or debts, so in this case that is the yield to maturity of a bond therefore the cost of debt is 10.04%

Other Questions
What factors are important for the MIG owners to consider before making a decision on whether or not they should sell the restaurant to AECB? Why are these factors important? Originally, scientists predicted small asteroids to be hard and rocky, as any loose surface material (called regolith) generated by impacts was expected to escape their weak gravity. Aggregate small bodies were not thought to exist, because the slightest sustained relative motion would cause them to separate. But observations and computer modeling are proving otherwise. Most asteroids larger than a kilometer are now believed to be composites of smaller pieces. Those imaged at high-resolution show evidence for copious regolith despite the weak gravity. Most of them have one or more extraordinarily large craters, some of which are wider than the mean radius of the whole body. Such colossal impacts would not just gouge out a craterthey would break any monolithic body into pieces. In short, asteroids larger than a kilometer across may look like nuggets of hard rock but are more likely to be aggregate assemblagesor even piles of loose rubble so pervasively fragmented that no solid bedrock is left.The rubble hypothesis, proposed decades ago by scientists, lacked evidence, until the planetologist Schumaker realized that the huge craters on the asteroid Mathilde and its very low density could only make sense together: a porous body such as a rubble pile can withstand a battering much better than an integral object. It will absorb and dissipate a large fraction of the energy of an impact; the far side might hardly feel a thing. At first, the rubble hypothesis may appear conceptually troublesome. The material strength of an asteroid is nearly zero, and the gravity is so low one is tempted to neglect that too. The truth is neither strength nor gravity can be ignored. Paltry though it may be, gravity binds a rubble pile together. And anybody who builds sandcastles knows that even loose debris can cohere. Oft-ignored details of motion begin to matter: sliding friction, chemical bonding, damping of kinetic energy, etc. We are just beginning to fathom the subtle interplay of these minuscule forces.The size of an asteroid should determine which force dominates. One indication is the observed pattern of asteroidal rotation rates. Some collisions cause an asteroid to spin faster; others slow it down. If asteroids are monolithic rocks undergoing random collisions, a graph of their rotation rates should show a bell-shaped distribution with a statistical "tail" of very fast rotators. If nearly all asteroids are rubble piles, however, this tail would be missing, because any rubble pile spinning faster than once every two or three hours fly apart. Recently, several astronomers discovered that all but five observed asteroids obey a strict rotation limit. The exceptions are all smaller than about 150 meters in diameter, with an abrupt cutoff for asteroids larger than 200 meters. The evident conclusionthat asteroids larger than 200 meters across are rubble pilesagrees with recent computer modeling of collisions. A collision can blast a large asteroid to bits, but those bits will usually be moving slower than their mutual escape velocity (the lowest velocity that a body must have in order to escape the orbit of a planet). Over several hours, gravity will reassemble all but the fastest pieces into a rubble pile.How would the author of the passage most likely respond to the assertion of another scientist claiming that a crater greater than the radius of an asteroid is a result of an impact?A. Asteroids actually contain a significant amount of regolith despite the force of weak gravity.B. Because of a great degree of fragmentation such an asteroid would have to have a solid bedrock.C. Such a crater would most probably result from a series of small impacts over a period of time.D. Most asteroids are held together by a series of forces that are often unstable.E. This claim would constitute evidence that the asteroid is not monolithic. An eight-sided die, which may or may not be a fair die, has four colors on it; you have been tossing the die for an hour and have recorded the color rolled for each toss. What is the probability you will roll a brown on your next toss of the die? Express your answer as a simplified fraction or a decimal rounded to four decimal places. brown purple green yellow 35 50 44 23 Joe is buying a laptop computer to take on trips. Although she has looked at several brands, she refuses to buy a computer that weighs more than five pounds. Jordana is basing her decision on a. a compensatory decision rule. b. habitual decision making. c. a noncompensatory decision rule. d. social factors. e. temporal factors. please help with number 4!! Which of the following plants most likely grew in the dark? Bob volunteers for the Humane Society and helps take care of the animals on weekends. He greatly enjoys working with a pet grooming company because he enjoys taking good care of his clients pets. What type of commitment is Bob likely experiencing? How can I turn this into a thesis statement? The excerpt from Night shows the darkness of humanity because it describes the horrors of a concentration camp. Convert 375 m/s to ft/min Frost damage to apple blossoms can severely reduce apple yield in commercial orchards. It has been determined that the probability of a late spring frost causing blossom damage to Empire apple trees in the Hudson Valley of New York State is 0.6. In a season when two frosts occur, what is the probability of an apple tree being injured in this period In promoting free trade, the author seems to be supporting A) fair and responsive standards to reduce trade barriers. B) fair and responsive standards to increase trade barriers. C) higher standards on Chinese goods to reduce software piracy. D) lower standards on Chinese goods to decrease investment by U.S. companies in China. Antonio owns property on which a gasoline station once stood. Josh agrees to buy the land so that he can build an office on it. They include language in the contract making the purchase contingent on a determination that there are no environmental problems with the property. The contingency represents:__________.a. an implied conditionb. a condition precedentc. a condition subsequent d. a concurrent condition __ grams of sugar will dissolvein 100 g of solution at 90C.80.6191.76 who is the tallest in stray kids Write the expression 2x2x2x2+7-5x5x5 using exponents The primary deliverables from requirements determination include: A. sets of forms, reports, and job descriptions B. transcripts of interviews C. notes from observation and from analysis documents D. All of these Uneven distribution of natural resources often leads to countries trading with one another, explain how Choose the correct completion.Por qu no_________ t?1.viniste2.vinieron Which web sites typically have a proven track record of credibility? Question 3 options:Colleges and Universities Government Agencies Non-Profit Organizations All of the above. John paid $450 for a new mountain bicycle to sell in his shop. He wants to pnce it so that he can offer a 10% discount but still make 20% of the price he paid for it. At what price should the bike be marked? The bike should be marked for $(Round to the nearest dollar as needed)