The thing which will happen when NaCl is purified by adding HCl to a saturated solution of NaCl (317 g/L) is
NaCl will not precipitate.What is a Saturated Solution?This refers to the type of solution which has a lot of solute that enables the solution to dissolve.
Hence, if NaCl is purified by the addition of HCl to a saturated solution of NaCl (317 g/L) and 30 mL of 4.5 M HCl is added to 0.15 L of saturated solution, then the NaCl will not precipitate because it cannot be transformed the dissolved substance to an insoluble solid as a result of the extra HCL added.
Read more about saturated solution here:
https://brainly.com/question/4529762
A moist soil sample weighing 5 lb has a moisture content of 2%. How many mL of water must be added to the sample to increase the moisture content to 10%? (This calculation is needed for your Compaction lab)
Answer:
The answer is 181.437 ml of water to increase the soil's moisture content to 10%.
Explanation:
We have been given:
Soil weight = 5 lb = 2.26796 kg
2% of moisture ⇒ [tex]\frac{2}{100}[/tex] × 2.26796 = 0.045359 kg of water in the soil
10% of moisture ⇒ [tex]\frac{10}{100}[/tex] × 2.26796 = 0.226796 kg of water in the soil
The difference in moisture content = (0.226796 - 0.045359) kg
=0.181432 kg
But 1kg = 1000 ml
∴ 0.181437 kg = 181.437 ml of water required to increase the moisture content to 10%
Changes in pressure have a measurable effect: (select all that apply) Select all that apply:
in any system only in systems in which gases are involved
when there are equal numbers of moles of gas on the reactant and product sides of the equilibrium only
when the chemical reaction produces a change in the total number of gas molecules in the system
Answer:
1. only in systems in which gases are involved
2. only when the chemical reaction produces a change in the total number of gas molecules in the system
Explanation:
According to Le Chatelier's principle, pressure will only affect a system in equilibrium containing gaseous reactants and products. However, change in the pressure will only affect the gaseous system in which the total number of moles of the reactants are different from the total number of moles of the products.
Pressure changes affect equilibrium systems involving gases, particularly when the reaction results in different numbers of gas molecules on each side. Thus option A is correct.
Pressure changes in a system at equilibrium have a measurable effect primarily in gaseous systems. Here's how they work:
Pressure changes impact systems in which gases are involved.The effect is significant when there is a change in the total number of gas molecules in the system.If the number of gas moles is equal on both sides of the reaction, there is no effect on equilibrium.This occurs because increasing the pressure (by decreasing the volume) will shift the equilibrium toward the side with fewer moles of gas, while decreasing the pressure (by increasing the volume) will shift it toward the side with more moles of gas.
Complete question:
Changes in pressure have a measurable effect: (select all that apply) Select all that apply:
A. in any system only in systems in which gases are involved
B. when there are equal numbers of moles of gas on the reactant and product sides of the equilibrium only
C. when the chemical reaction produces a change in the total number of gas molecules in the system
D. None of these
How would the calculated ratio of water molecules present in Epsom salt be affected if the procedure was changed so the analysis was preformed using 2.500g of hydrated salt instead of 1.500g? Assume you still heated the sample to a constant mass. (Too High, Too Low, Unchanged) Explain
Answer:
Unchanged
Explanation:
Epsom salt is also referred to as magnesium sulphate heptahydrate with the chemical formula [tex]MgSO_4.7H_2O.[/tex]
There are 7 moles of water and 1 mole of magnesium sulphate in every 1 mole of epsom salt. The water ratio remains the same irrespective of the amount or weight of epsom salt taken.
Hence, if 2.500 g of epsom salt is taken and heated to a constant mass instead of 1.500 g, the ratio of water molecules present will be the same.
A chlorine atom is adsorbed on a small patch of surface (see sketch at right). This patch is known to contain possible adsorption sites. The atom has enough energy to move from site to site, so it could be on any one of them. Suppose a atom also becomes adsorbed onto the surface. Calculate the change in entropy. Round your answer to significant digits, and be sure it has the correct unit symbol.
The given question is incomplete. The complete question is as follows.
A chlorine atom is adsorbed on a small patch of surface (see sketch at right). This patch is known to contain 81 possible adsorption sites. The atom has enough energy to move from site to site, so it could be on any one of them. Suppose a Br atom also becomes adsorbed onto the surface. Calculate the change in entropy. Round your answer to significant digits, and be sure it has the correct unit symbol.
Explanation:
The change in entropy will be calculated by using the following formula.
[tex]\Delta S = k_{B} ln (\frac{W}{W_{o}})[/tex]
Initially, it is given tha Cl atom could be adsorbed on any of the 81 sites. When Br is added then there will be 80 possible sites when the Br can be adsorbed. This means that total possible sites are as follows.
[tex]81 \times 80[/tex]
= 6480
This shows that there are 6480 microstates which are accessible to the system.
So, change in entropy will be calculated using the Boltzmann constant as follows.
[tex]\Delta S = 1.381 \times 10^{-23} J/K \times ln (\frac{6480}{81})[/tex]
= [tex]1.381 \times 10^{-23} J/K \times 4.382[/tex]
= [tex]6.05 \times 10^{-23} J/K[/tex]
or, = [tex]6.1 \times 10^{-23} J/K[/tex] (approx)
Thus, we can conclude that the change in entropy is [tex]6.1 \times 10^{-23} J/K[/tex].
A 0.9679-g sample containing dimethylphthalate, (194.19 g/mol), and unreactive species was refluxed with 50.00 mL of 0.1215 M to hydrolyze the ester groups (this process is called saponification).
C6H4(COOCH3)2 + 2OH----->> C6H4(COO)-2 + H2O
After the reaction was complete, the excess NaOH was back titrated with 32.25mL of 0.1251M HCl. Calculate the percentage of dimethylphthalate in the sample.
Answer:
20.44% is the percentage of dimethylphthalate in the sample.
Explanation:
Molarity of NaOH = [tex]M_1=0.1215 M[/tex]
Volume of NaOH consumed in back titration = [tex]V_1=?[/tex]
Molarity of HCl =[tex]M_2=0.1251 M[/tex]
Volume of HCl = [tex]V_2=32.25 ml[/tex]
[tex]M_1V_1=M_2V_2[/tex]
[tex]V_1=\frac{M_2V_2}{M_1}=\frac{0.1251 M \times 50.0 mL}{0.1215 M}[/tex]
[tex]V_1=33.21 mL[/tex]
Volume of NaOH used in hydrolysis of ester = 50.00 mL - 33.21 mL = 16.79 mL[/tex]
Moles of NaOH in 16.79 ml of 0.1215 M solution : n
Volume of solution = 16.79 mL = 0.01679 L ( 1mL=0.001 L)
[tex]n=0.1215 M\times 0.01679 L =0.002040 mol[/tex]
1 mole of NaOH has 1 mole of hydroxide ions than 0.002040 moles of NaOH will have :
1 × 0.002040 mol = 0.002040 mol of hydroxide ions
Moles of hydroxide ions = 0.002040 mol
[tex]C_6H_4(COOCH_3)_2 + 2OH^-\rightarrow C_6H_4(COO)^{2-} + 2H_2O[/tex]
According to reaction, 2 moles of hydroxide ion reacts with 1 mole of dimethylphthalate , then 0.002040 moles of hydroxide ion swill react with ;
[tex]\frac{1}{2}\times 0.002040 mol=0.001020 mol[/tex] of dimethylphthalate
Mass of 0.001020 moles of dimethylphthalate :
194 g/mol × 0.001020 mol = 0.1979 g
Mass of sample = 0.9679 g
Mass of dimethylphthalate = 0.1979 g
Percentage of dimethylphthalate in sample;
[tex]=\frac{0.1979 g}{0.9679 g}\times 100=20.44\%[/tex]
20.44% is the percentage of dimethylphthalate in the sample.
Final answer:
The percentage of dimethylphthalate in the sample is calculated by first determining the moles of NaOH that reacted with it, then converting those moles to grams of dimethylphthalate, and finally dividing this by the original sample mass. The calculated percentage is approximately 20.48%.
Explanation:
The question pertains to the calculation of the percentage of dimethylphthalate in a sample after a saponification reaction followed by a back titration. Firstly, we need to calculate the amount of NaOH that reacted with dimethylphthalate. This is done by determining the amount of NaOH remaining after the reaction, which is found through the back titration with HCl. The total amount of NaOH initially added to the reaction is 50.00 mL of 0.1215 M, which equals 6.075 mmol. The back titration used 32.25 mL of 0.1251 M HCl, which equals 4.033 mmol of NaOH remaining.
Thus, the amount of NaOH that reacted with dimethylphthalate is 6.075 mmol - 4.033 mmol = 2.042 mmol. Since the saponification of dimethylphthalate requires two moles of NaOH for each mole of ester, the moles of dimethylphthalate are half this amount, which is 1.021 mmol. Multiplying by the molar mass of dimethylphthalate (194.19 g/mol) gives 0.1983 g of dimethylphthalate in the sample.
Finally, the percentage of dimethylphthalate in the sample is calculated by dividing the mass of dimethylphthalate by the original sample mass and multiplying by 100. Therefore, it is (0.1983 g / 0.9679 g) × 100 = 20.48%.
A solution is prepared by dissolving 28.8g of glucose (C6H12O6) in 350g of water. The final volume of the solution is 380mL . For this solution, calculate each of the following: molarity, Molality, percent by mass, mole fraction, mole percent
Answer:
Molarity → 0.410 M
Molality → 0.44 m
Percent by mass → 7.61 g
Mole fraction (Xm) = 7.96×10⁻³
Mole percent = 0.79 %
Explanation:
We analyse data:
28.8 g of glucose → To determine molarity, molality, mole fraction, mole percent we need to find out the moles:
28.2 g. 1mol / 180 g = 0.156 moles of glucose
350 g of water → Mass of solvent.
We convert from g to kg in order to determine molality = 350 g / 1000 = 0.350 kg
We also need the moles of solvent: 350 g / 18 g/mol = 19.44 moles
380 mL of solution → Volume of solution; to determine the molarity we need the volume in L → 380 mL / 1000 = 0.380L
Solution mass = Solute mass + Solvent mass
28.2 g + 350 g = 378.2 g
Total moles = Moles of solute + Moles of solvent
0.156 + 19.44 = 19.596 moles
Molarity → Moles of solute in 1L of solution → 0.156 mol / 0.380L = 0.410 M
Molality → Moles of solute in 1kg of solvent → 0.156 mol / 0.350 kg = 0.44 m
Percent by mass → Mass of solute in 100 g of solution
(28.8g /378.2g) . 100 = 7.61 g
Mole fraction (Xm)= Moles of solute/ Total moles → 0.156 mol / 19.596 moles = 7.96×10⁻³
Mole percent = Xm . 100 → 7.96×10⁻³ . 100 = 0.79 %
The molarity of the solution is 0.42 M. The molality of the solution is 0.46 m.
a)To obtain the molarity of the solution;
Number of moles = mass of glucose/molar mass of glucose = 28.8g/180 g/mol
= 0.16 moles
Volume of solution = 380mL or 0.38 L
Molarity = number of moles /volume = 0.16 moles/ 0.38 L = 0.42 M
b) Molality of the solution;
Mass of solvent in Kg = 350g/1000 = 0.35 Kg
Molality = number of moles/mass of solution in kilogram = 0.16 moles/ 0.35 Kg = 0.46 m
c) percent by mass = mass of solute/mass of solution× 100
= 28.8g/(350g +28.8g) × 100 = 7.6 %
d) Mole fraction
Number of moles of water = 350g/ 18 g/mol = 19.44 moles
Total number of moles = 19.44 moles + 0.16 moles = 19.6 moles
Mole fraction of glucose = 0.16 moles/19.6 moles = 0.0082
e) Mole percent
Mole fraction × 100 = 0.0082 × 100 = 0.82%
Learn more: https://brainly.com/question/9352088
Consider the titration of 1L of 0.36 M NH3 (Kb=1.8x10−5) with 0.74 M HCl. What is the pH at the equivalence point of the titration? A) 4.69 B) 4.85 C) 4.94 D) 9.06 E) 9.31
Answer:
C
Explanation:
The question asks to calculate the pH at equivalence point of the titration between ammonia and hydrochloric acid
Firstly, we write the equation of reaction between ammonia and hydrochloric acid.
NH3(aq)+HCl(aq)→NH4Cl(aq)
Ionically:
HCl + NH3 ---> NH4 + Cl-
Firstly, we calculate the number of moles of the ammonia as follows:
from c = n/v and thus, n = cv = 0.36 × 1 = 0.36 moles
At the equivalence point, there is equal number of moles of ammonia and HCl.
Hence, volume of HCl = number of moles/molarity of HCl = 0.36/0.74 = 0.486L
Hence, the total volume of solution will be 1 + 0.486 = 1.486L
Now, we calculate the concentration of the ammonium ions = 0.36/1.486 = 0.242M
An ICE TABLE IS USED TO FIND THE CONCENTRATION OF THE HYDROXONIUM ION(H3O+). ICE STANDS FOR INITIAL, CHANGE AND EQUILIBRIUM.
NH4+ H2O ⇄ NH3 H3O+
I 0.242 0 0
C -X +x +X
E 0.242-X X X
Since the question provides us with the base dissociation constant value K b, we can calculate the acid dissociation constant value Ka
To find this, we use the mathematical equation below
K a ⋅ K b = K w
, where K w- the self-ionization constant of water, equal to
10 ^-14 at room temperature
This means that you have
K a = K w.K b = 10 ^− 14 /1.8 * 10^-5 = 5.56 * 10^-10
Ka = [NH3][H3O+]/[NH4+]
= x * x/(0.242-x)
Since the value of Ka is small, we can say that 0.242-x ≈ 0.242
Hence, K a = x^2/0.242 = 5.56 * 10^-10
x^2 = 0.242 * 5.56 * 10^-10 = 1.35 * 10^-10
x = 0.00001161895
[H3O+] = 0.00001161895
pH = -log[H3O+]
pH = -log[0.00001161895 ] = 4.94
The pH at the equivalence point of the titration is:
C) 4.94
Chemical equation:NH₃(aq)+HCl(aq)→NH₄Cl(aq)
Ionic chemical equation:
HCl + NH₃ ---> [tex]NH_4^+ + Cl^-[/tex]
Calculation for number of moles:c = n/v
n = cv = 0.36 × 1 = 0.36 moles
At the equivalence point, there is equal number of moles of ammonia and HCl.
Hence, volume of HCl = number of moles/molarity of HCl = 0.36/0.74 = 0.486L
Hence, the total volume of solution will be 1 + 0.486 = 1.486L
Calculation for concentration of the ammonium ions = 0.36/1.486 = 0.242M
[tex]NH_4^+[/tex] H₂O ⇄ NH₃ [tex]H_3O^+[/tex]
I 0.242 0 0
C -X +x +X
E 0.242-X X X
Since the question provides us with the base dissociation constant value K b, we can calculate the acid dissociation constant value :Ka
To find this, we use the mathematical equation below:
K a ⋅ K b = K w
Kw = [tex]10^{-14}[/tex]
[tex]K_a = K_w*K_b\\\\ 10^{− 14} /1.8 * 10^{-5} = 5.56 * 10^{-10}\\\\K_a = [NH_3][H_3O^+]/[NH_4^+]\\\\K_a = x * x/(0.242-x)[/tex]
Since, the value of Ka is small, we can say that 0.242-x ≈ 0.242
[tex]K_a = x^2/0.242 = 5.56 * 10^{-10}\\\\x^2 = 0.242 * 5.56 * 10^{-10} = 1.35 * 10^{-10}\\\\x = 0.00001161895\\\\H_3O^+= 0.00001161895\\\\pH = -log[H_3O^+]\\\\pH = -log[0.00001161895 ] = 4.94[/tex]
Thus, correct option is C. The pH at the equivalence point of the titration is: 4.94
Find more information about Dissociation constant here:
brainly.com/question/3006391
How much Ca3(PO4)2(s) could be produced in an industrial process if 55.00 g of CaCl2 in solution reacted completely with sufficient Na3(PO4) (aq)
Answer:
51.1 g of Ca₃(PO₄)₂(s) can be made in this reaction
Explanation:
The reactans are CaCl₂ and Na₃PO₄. Let's determine the reaction:
3CaCl₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) ↓ + 6NaCl(aq)
We convert the mass of chloride to moles:
55 g . 1 mol/ 110.98 g = 0.495 moles
Ratio is 3:1. Let's make a rule of three to find the answer in moles:
3 moles of chloride can produce 1 mol of phosphate
Therefore 0.495 moles will produce (0.495 . 1) / 3 = 0.165 moles
We convert the moles to mass:
0.165 mol . 310.18 g /1 mol = 51.1 g
The mass of calcium phosphate produced has been 51.1 g.
The balanced chemical equation of for the reaction has been:
[tex]\rm 3\;CaCl_2\;+\;2\;Na_3PO_4\;\rightarrow\;Ca_3(PO_4)_2\;+\;6\;NaCl[/tex]
The balanced chemical equation has been given that 3 moles of calcium chloride produces 1 moles of calcium phosphate.
The moles of calcium chloride in 55 g sample has been given as:
[tex]\rm Moles=\dfrac{Mass}{Molar\;mass}[/tex]
Substituting the values:
[tex]\rm Moles=\dfrac{55}{110.98}\\Moles\;CaCl_2=0.495\;mol[/tex]
The moles of calcium chloride has been 0.495 mol.
The moles of calcium formed has been given by:
[tex]\rm 3\;mol\;CaCl_2=1\;mol\;Ca_3(PO_4)_2\\0.495\;mol\;CaCl_2=\dfrac{1}{3}\;\times\;0.495\;mol\; Ca_3(PO_4)_2\\0.495\;mol\;CaCl_2=0.165\;mol\;Ca_3(PO_4)_2\\[/tex]
The moles of calcium phosphate formed has been 0.165 mol.
The mass of calcium phosphate has been:
[tex]\rm Mass=Moles\;\times\;molar\;mass\\Mass=0.165\;\times\;310.18\;g\\Mass=51.1\;g[/tex]
The mass of calcium phosphate produced has been 51.1 g.
For more information about moles formed, refer to the link:
https://brainly.com/question/4066080
hydrogen gas can be produced from the reaction of calcium hydride and water. How many grams of calcium hydride are needed to produce 2.5 l of hydrogen gas, collected over water at 26 degrees celcius and 760 torr
Answer:
2.144 g of calcium hydride are needed to produce 2.5 l of hydrogen gas, collected over water at 26 degrees celcius and 760 torr.
Explanation:
The reaction of Calcium hydride and water is given by
CaH₂ + 2H₂O -----> Ca(OH)₂ + 2H₂
2 moles of Hydrogen gas are produced from 1 mole of Calcium hydride.
But we need to find out how much moles of Hydrogen are produced from this reaction first.
Using the ideal gas, equation,
PV = nRT
P = pressure = 760 torr = 101325 Pa
V = volume of hydrogen gas produced = 2.5 L = 0.0025 m³
n = number of moles of Hydrogen gas produced = ?
R = molar gas constant = 8.314 J/mol.K
T = absolute temperature in Kelvin = 26°C = 299.15 K
n = PV/RT = (101325×0.0025)/(8.314×299.15) = 0.102 moles
Back to the stoichiometric balance of the reaction
CaH₂ + 2H₂O -----> Ca(OH)₂ + 2H₂
2 moles of Hydrogen are produced from 1 mole of Calcium hydride
0.102 moles of Hydrogen will be produced from (0.102 × 1/2) moles of Calcium hydride.
Moles of Calcium hydride = 0.051 moles.
Mass of Calcium hydride that reacted = number of moles of Calcium hydride that reacted × Molar mass
Moles mass of Calcium hydride = 42.094 g/mol
Mass of Calcium hydride that reacted = 0.051 × 42.094 = 2.144g
What is the difference between docosahexaenoate (DHA) and 19,20-dihydroxydocosapentaenoate (19,20-DHDP)? Only DHA is a polyunsaturated fatty acid. DHA has a higher melting point than 19,20-DHDP. 19,20-DHDP is more polar than DHA. Only DHA is a an ω ω -3 fatty acid.
Answer:
Explanation:
The correct answer is 19, 20 DHDP is more polar than DHA. This is as a result of the presence of two hydroxyl groups.
Docosahexaenoate (DHA) is a long-chain polyunsaturated omega-3 fatty acid important for brain and heart health, whereas 19,20-dihydroxydocosapentaenoate (19,20-DHDP) is a hydroxylated derivative of DHA that is more polar due to additional oxygen-containing groups.
Explanation:The difference between docosahexaenoate (DHA) and 19,20-dihydroxydocosapentaenoate (19,20-DHDP) primarily lies in their chemical structure and resulting properties. DHA is a long-chain polyunsaturated fatty acid (PUFA) with 22 carbon atoms and six double bonds, specifically an omega-3 fatty acid. It is known for its important role in brain development, cognitive function, and cardiovascular health. DHA can be synthesized in the body from alpha-linoleic acid (ALA), though the rate of conversion is limited, suggesting a dietary need for DHA-rich foods or supplements.
Meanwhile, 19,20-DHDP is a derivative of DHA that has been hydroxylated, containing additional oxygen groups which make it more polar than DHA. This increase in polarity could impact the compound's function and location within biological membranes.
Carbon dioxide and water react to form methanol and oxygen, like this: CO2(g) + H2O (g) ----> CH3OH (l) + O2 (g) At a certain temperature, a chemist finds that 8.6 L a reaction vessel containing a mixture of carbon dioxide, water, methanol, and oxygen at equilibrium has the following composition: compound amount CO2 2.25 gH2O 2.72 gCH3OH 3.82 gO2 1.98 gCalculate the value of the equilibrium constant for this reaction. Round your answer to significant digits.
Final answer:
The concentration equilibrium constant (Kc) will not include CH₃OH because it is a pure liquid. Then, Kc = 68.
Explanation:
First, we will calculate the molar concentration (M) of each substance using the following expression.
M = mass of the substance / molar mass of the substance × volume of solution
CO₂
M = 2.25 g / 44.01 g/mol × 8.6 L = 0.0059 M
H₂O
M = 2.72 g / 18.02 g/mol × 8.6 L = 0.018 M
CH₃OH
M = 3.82 g / 32.04 g/mol × 8.6 L = 0.014 M
O₂
M = 1.98 g / 32.00 g/mol × 8.6 L = 0.0072 M
Let's consider the following reaction at equilibrium.
CO₂(g) + H₂O(g) ⇄ CH₃OH(l) + O₂(g)
The concentration equilibrium constant (Kc) will not include CH₃OH because it is a pure liquid. Then,
Kc = [O₂] / [CO₂] × [H₂O]
Kc = 0.0072 / 0.0059 × 0.018
Kc = 68
Initial alcohol is converted to compound A. Compound A undergoes three different transformations. Name compound A and each the final product in three transformations.
Explanation:
Initial alcohol that is formed from methane is methanol that can be converted to acetic acid.Methanol in presence of [tex]CO_2[/tex] and hydrogen gas gets oxidized to acetic acid with the release of water.Hence, compound A will be Acetic acid.
[tex]CH_3OH + CO_2 +H_2[/tex] → [tex]CH_3COOH + H_2O[/tex]
The acetic acid formed can be transformed into -[tex]CH_3COOH[/tex] → [tex]CH_4 + CO[/tex]The product formed is methane and carbon monoxide.
2. [tex]CH_3COOH[/tex] → [tex]CH_2CHO + H_2O[/tex]
The product formed is formaldehyde and water.
3. [tex]CH_3COOH + NaHCO_3[/tex] → [tex]CH_3COONa +CO_2 +H_2O[/tex]
The product formed is sodium acetate, carbon dioxide, and water.
Group the elements into pairs that would most likely exhibit similar chemical properties. It does not matter which pair of elements is pair 1, pair 2, or pair 3, so long as the correct elements are paired. Pair 1 Pair 2 Pair 3
a. F K
b. P
c. As
d. Br Li
Explanation:
A property that leads to changes in chemical composition of a substance is known as chemical property. So, when we move down a group in periodic table then chemical properties of the elements remain the same.
This is because elements of the same group tend to have same number of valence electrons. Therefore, they have similar reactivity which leads to change in their chemical composition upon reaction with another substance.
For example, lithium (Li) and potassium (K) are both group 1 elements. And, phosphorous (P) and arsenic (As) are both group 15 elements.
Thus, we can conclude that pair of Li and K will show similar chemical properties. Also, pair of P and As will show similar chemical properties.
A chemist prepares a solution of vanadium(III) bromide (VBr) by measuring out 0.12 g of VBr into a 300 ml. volumetric flask and filling to the mark with distilled water. Calculate the molarity of Branions in the chemist's solution. Be sure your answer is rounded to significant digits.
Answer: The molarity of bromine ions in the chemist's solution is [tex]4.06\times 10^{-3}M[/tex]
Explanation:
To calculate the molarity of solution, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (in L)}}[/tex]
Given mass of vanadium(III) bromide = 0.12 g
Molar mass of vanadium(III) bromide = 295.65 g/mol
Volume of solution = 300 mL
Putting values in above equation, we get:
[tex]\text{Molarity of solution}=\frac{0.12\times 1000}{295.65g/mol\times 300}\\\\\text{Molarity of solution}=1.353\times 10^{-3}M[/tex]
The chemical formula of vanadium(III) bromide is [tex]VBr_3[/tex]
1 mole of vanadium(III) bromide produces 1 mole of [tex]V^{3+}[/tex] ions and 3 moles of [tex]Br^-[/tex] ions
Molarity of bromine ions = [tex](3\times 1.353\times 10^{-3})=4.06\times 10^{-3}M[/tex]
Hence, the molarity of bromine ions in the chemist's solution is [tex]4.06\times 10^{-3}M[/tex]
Final answer:
The molarity of bromide ions (Br-) in the solution is 0.00179 M.
Explanation:
To calculate the molarity of bromide ions (Br-) in the solution, we need to determine the number of moles of VBr. Given that the mass of VBr is 0.12 g and its molar mass is 223.6 g/mol (51.9 g/mol for V and 79.9 g/mol for Br), we can calculate the number of moles:
moles of VBr = mass of VBr / molar mass of VBr
= 0.12 g / 223.6 g/mol
= 0.000536 mol
Since the solution is 300 ml, we need to convert the volume to liters:
volume in liters = volume in ml / 1000
= 300 ml / 1000
= 0.3 L
molarity of Br- = moles of VBr / volume in liters
= 0.000536 mol / 0.3 L
= 0.00179 M (rounded to significant digits)
Be sure to answer all parts.The equilibrium constant (Kc) for the formation of nitrosyl chloride, an orange-yellow compound, from nitric oxide and molecular chlorine 2NO(g) + Cl2(g) ⇌ 2NOCl(g) is 1 × 107 at a certain temperature. In an experiment, 4.40 × 10−2 mole of NO, 1.80 × 10−3 mole of Cl2, and 9.50 moles of NACl are mixed in a 2.60−L flask. What is Qc for the experiment
The equilibrium constant (Kc) and reaction quotient (Qc) are calculated using the initial molar concentrations of the substances involved in the reaction. The Qc for the formation of nitrosyl chloride from nitric oxide and molecular chlorine is 0, given the initial conditions provided.
Explanation:The student is asking about the equilibrium constant (Kc) and reaction quotient (Qc) for the formation of nitrosyl chloride from nitric oxide and molecular chlorine. To calculate the reaction quotient (Qc) of the reaction 2NO(g) + Cl2(g) ⇌ 2NOCl(g), you need to know the molar concentrations of the reactants and products.
First, find the initial concentrations of NO, Cl2, and NOCl by dividing their quantities by the volume of the flask, which is 4.40×10^-2 mol/2.60L for NO, 1.80×10^-3 mol/2.60L for Cl2, and 0 for NOCl because it's not initially present.
Then, we plug these concentrations into the Qc expression, which for this balanced equation is [NOCl]^2 / ([NO]^2 [Cl2]) = (0)^2 / ((4.40×10^-2 mol/2.60L)^2 * (1.80×10^-3 mol/2.60L)) = 0.
So, the reaction quotient Qc for the experiment is 0.
Learn more about Chemistry Equilibriums here:https://brainly.com/question/36150835
#SPJ12
Using the balanced equation and these concentrations, we find Qc to be 6.73 × 10⁷.
To determine the reaction quotient, Qc, for the given reaction:
2NO(g) + Cl₂(g) ⇌ 2NOCl(g)
We follow these steps:
Calculate the initial concentrations of the reactants and products in the flask:For NO: [NO] = (4.40 × 10⁻² mol) / (2.60 L) = 1.69 × 10⁻² MFor Cl₂: [Cl₂] = (1.80 × 10⁻³ mol) / (2.60 L) = 6.92 × 10⁻⁴ MFor NOCl: [NOCl] = (9.50 mol) / (2.60 L) = 3.65 MWrite the expression for Qc based on the balanced chemical equation:Qc = [NOCl]₂ / ([NO]₂ [Cl₂])Substitute the known concentrations into the Qc expression:Qc = (3.65)² / ((1.69 × 10⁻²)² (6.92 × 10⁻⁴))Calculate Qc:Qc = 13.32 / (2.86 × 10⁻⁴ × 6.92 × 10⁻⁴)Qc = 13.32 / 1.98 × 10⁻⁷Qc = 6.73 × 10⁷Thus, the reaction quotient Qc for the experiment is 6.73 × 10⁷.
A sample of nitrogen gas in a 8.5-L container at a temperature of 55°C exerts a pressure of 2.9 atm. Calculate the number of moles of gas in the sample.
Answer:
The number of moles of gas in the sample = 0.916 moles
Explanation:
Step 1: Data given
Volume of the container = 8.5 L
Temperature = 55 °C = 328 K
Pressure = 2.9 atm
Step 2: Calculate the number of moles of gas in the sample.
p*V = n*R*T
⇒with p = the pressure = 2.9 atm
⇒with V = the volume of the container = 8.5L
⇒with n = the number of moles of gas = ?
⇒with R = the gas constant = 0.08206 L*atm/mol*K
⇒with T = the temperature = 328 K
n = (p*V)/(R*T)
n = (2.9*8.5)/(0.08206*328)
n = 24.65 / 26.91568
n = 0.916 moles
The number of moles of gas in the sample = 0.916 moles
In a constant‑pressure calorimeter, 70.0 mL of 0.310 M Ba ( OH ) 2 was added to 70.0 mL of 0.620 M HCl . The reaction caused the temperature of the solution to rise from 21.12 ∘ C to 25.34 ∘ C. If the solution has the same density and specific heat as water, what is heat absorbed by the solution? Assume that the total volume is the sum of the individual volumes. (And notice that the answer is in kJ).
Answer: The amount of heat absorbed by the solution is 56.98 kJ
Explanation:
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex] .....(1)
For Barium hydroxide:Molarity of barium hydroxide solution = 0.310 M
Volume of solution = 70 mL = 0.070 L (Conversion factor: 1 L = 1000 mL)
Putting values in equation 1, we get:
[tex]0.310M=\frac{\text{Moles of }Ba(OH)_2}{0.070L}\\\\\text{Moles of }Ba(OH)_2=(0.310mol/L\times 0.070L)=0.0217mol[/tex]
For HCl:Molarity of HCl solution = 0.620 M
Volume of solution = 70 mL = 0.070 L
Putting values in equation 1, we get:
[tex]0.620M=\frac{\text{Moles of HCl}}{0.070L}\\\\\text{Moles of HCl}=(0.620mol/L\times 0.070L)=0.0434mol[/tex]
The chemical equation for the reaction of NaOH and sulfuric acid follows:
[tex]Ba(OH)_2+2HCl\rightarrow BaCl_2+2H_2O[/tex]
By Stoichiometry of the reaction:
2 moles of HCl produces 2 moles of water
So, 0.0434 moles of HCl will produce = [tex]\frac{2}{2}\times 0.0434=0.0434moles[/tex] of water
To calculate the mass of solution, we use the equation:[tex]\text{Density of substance}=\frac{\text{Mass of substance}}{\text{Volume of substance}}[/tex]
Density of solution = 1 g/mL
Volume of solution = [70 + 70] = 140 mL
Putting values in above equation, we get:
[tex]1g/mL=\frac{\text{Mass of solution}}{140mL}\\\\\text{Mass of solution}=(1g/mL\times 140mL)=140g[/tex]
To calculate the amount of heat absorbed, we use the equation:[tex]q=mc\Delta T[/tex]
where,
q = heat absorbed
m = mass of solution = 140 g
c = heat capacity of solution= 4.186 J/g°C
[tex]\Delta T[/tex] = change in temperature = [tex]T_2-T_1=(25.34-21.12)^oC=4.22^oC[/tex]
Putting values in above equation, we get:
[tex]q=140g\times 4.186J/g^oC\times 4.22^oC=2473.08J=2.473kJ[/tex]
To calculate the enthalpy change of the reaction, we use the equation:
[tex]\Delta H_{rxn}=\frac{q}{n}[/tex]
where,
q = amount of heat absorbed = 2.473 kJ
n = number of moles of water = 0.0434 moles
[tex]\Delta H_{rxn}[/tex] = enthalpy change of the reaction
Putting values in above equation, we get:
[tex]\Delta H_{rxn}=\frac{2.473kJ}{0.0434mol}=56.98kJ/mol[/tex]
Hence, the amount of heat absorbed by the solution is 56.98 kJ
The total heat absorbed is approximately 2.47 kJ.
To find the heat absorbed by the solution in the given calorimetry problem, we use the equation q = mcΔT, where m is the mass, c is the specific heat, and ΔT is the temperature change.
To determine the heat absorbed by the solution in this constant-pressure calorimeter problem, we will use the equation: q = mcΔTwhere:
m is the mass of the solutionc is the specific heat capacityΔT is the change in temperatureStep-by-Step Solution:
Calculate the total volume of the solution. Adding 70.0 mL of Ba(OH)2 to 70.0 mL of HCl gives a total volume of:Total Volume = 70.0 mL + 70.0 mL = 140.0 mLAssume the density of the solution is the same as water, 1.00 g/mL. Thus, the mass of the solution (m) is:Mass = 140.0 mL x 1.00 g/mL = 140.0 gThe specific heat capacity (c) of the solution is assumed to be the same as water, which is:c = 4.18 J/g°CCalculate the change in temperature (ΔT):ΔT = 25.34°C - 21.12°C = 4.22°CFinally, calculate the heat absorbed (q) by the solution:q = mcΔTq = 140.0 g x 4.18 J/g°C x 4.22°Cq ≈ 2466.7 J (approximately 2.47 kJ)Thus, the heat absorbed by the solution is approximately 2.47 kJ.
Correct question is: In a constant‑pressure calorimeter, 70.0 mL of 0.310 M Ba(OH)₂ was added to 70.0 mL of 0.620 M HCl . The reaction caused the temperature of the solution to rise from 21.12°C to 25.34°C . If the solution has the same density and specific heat as water, what is heat absorbed by the solution? Assume that the total volume is the sum of the individual volumes. (And notice that the answer is in kJ).
A stock solution of Blue #1 has a concentration of 5.736 M. 3 mL of this solution is diluted with 8 mL water. What is the concentration of the resulting solution? Provide your response to 3 significant figures.
Answer:
1.56 M
Explanation:
This is a dilution process and so a dilution formula is suitably used as follows C1V1 = C2V2 where
C1 = concentration of the stock solution
V1 = volume of the stock solution
C2 = concentration of the resulting (dilute) solution and
V2 = the volume of the resulting (dilute) solution
C1V1 = C2V2 (Making C2 subject of the formula)
C2 = C1V1/V2
Given: C1 = 5.736 M; V1 = 3 Ml; V2 = (3+8) 11 Ml
C2 = 5.736 x 3 / 11
C2 = 1.56 M
The concentration of the resulting solution will be "1.56 M".
Dilution process:The procedure of decreasing the concentration of such a particular solute through its solution has been known as dilution.
This same chemist could essentially add extra solvent to the mixture.
According to the question,
Stock solution's concentration, C₁ = 5.736 M
Stock solution's volume, V₁ = 3 mL
Resulting solution's volume, V₂ = 3 mL + 8 mL
= 11 mL
By using the dilution equation, we get
→ C₂ = [tex]\frac{C_1 V_1}{V_2}[/tex]
By substituting the above values,
= [tex]\frac{5.736\times 3}{11}[/tex]
= [tex]\frac{17.208}{11}[/tex]
= [tex]1.56[/tex] M
Thus the above answer is right.
Find out more information about concentration here:
https://brainly.com/question/16343005
A chemistry graduate student is given 125.mL of a 1.00M benzoic acid HC6H5CO2 solution. Benzoic acid is a weak acid with =Ka×6.310−5.What mass of KC6H5CO2 should the student dissolve in the HC6H5CO2 solution to turn it into a buffer with pH =4.63? You may assume that the volume of the solution doesn't change when the KC6H5CO2 is dissolved in it
Answer:
53.9 g
Explanation:
We must use the Henderson-Hasselbach equation to answer this question:
pH = pKa + log [A⁻]/[HA]
we know the pH, pKa (pKa = -log Ka), thus we can compute the ratio [A⁻]/[HA], and from this the mass of KC6H5CO2 knowing that M = mol/L.
therefore,
4.63 = - log ( 6.3 x 10⁻⁵ ) + log [A⁻]/[HA]
4.63 = - ( - 4.20 ) + log [A⁻]/[HA]
0.43 = log [A⁻]/[HA]
taking inverse log to both sides of this equation
2.69 = [A⁻]/[HA]
Now [A⁻] =2.69 x [HA] =2.69 x 1.00 M = 2.69 M
We know the molarity is equal to mol per liter of solution, so
mol KC6H5CO2 = 2.69 mol/L x 0.125 L = 0.36 mol
and using the molecular weight of KC6H5CO2 we get that the mass is
0.336 mol x 160.21 g/mol = 53.9 g
The student should take 53.9 g of KC6H5CO2
Answer:
He should dissolve 53.9 grams of KC6H5CO2
Explanation:
Step 1: Data given
Volume of A 1.00 M benzoic acid solution = 125 mL = 0.125 L
Ka of benzoic acid = 6.3*10^-5
pH = 4.63
Step 2: Calculate concentration of conjugate base
pH = pKa + log ([A-]/[HA])
4.63 = 4.20 + log ([A-]/[HA])
0.43 = log ([A-]/[HA])
10^0.43 = [A-]/[HA])
2.69 = [A-]/[HA])
2.69 = [A-]/ 1.00
[A-] = 2.69 M
Step 3: Calculate moles KC6H5CO2
Moles molarity * volume
Moles = 2.69 M * 0.125 L
Moles = 0.33625 moles
Step 4: Calculate mass KC6H5CO2
Mass of KC6H5CO2 = moles * molar mass
Mass of KC6H5CO2 = 0.33625 moles * 160.21 g/mol
Mass of KC6H5CO2 = 53.9 grams
He should dissolve 53.9 grams of KC6H5CO2
63Ni decays by a first-order process via the emission of a beta particle. The 63Ni isotope has a half-life of 100. years. How long will it take for 65% of the nickel to undergo decay?
Answer:
151.4863 years
Explanation:
Half life, t1/2 = 100 years
Initial concentration,[A]o = 100%
Final concentration, [A] = 35% (after 65% have been decayed)
Time = ?
Half life for a first Order reaction is given as;
t1/2 = ln (2) / k
k = ln(2) / 100
k = 0.00693y-1
The integral rate law for first order reactions is given as;
ln[A] = ln[A]o − kt
kt = ln[A]o - ln[A]
t = ( ln[A]o - ln[A]) / k
t = [ln(100) - ln(35)] /0.00693
t = 1.0498 / 0.00693
t = 151.4863 years
It will take approximately 173.04 years for 65% of the nickel to undergo decay.
The decay of a radioactive substance is governed by the first-order kinetics equation:
[tex]\[ N(t) = N_0 e^{-\lambda t} \][/tex]
where:
- [tex]\( N(t) \)[/tex] is the number of un decayed nuclei at time [tex]\( t \)[/tex],
- [tex]\( N_0 \)[/tex] is the initial number of nuclei,
- [tex]\( \lambda \)[/tex] is the decay constant, and
- [tex]\( t \)[/tex] is the time elapsed.
The decay constant [tex]\( \lambda \)[/tex] is related to the half-life [tex]\( t_{1/2} \)[/tex] by the equation:
[tex]\[ \lambda = \frac{\ln(2)}{t_{1/2}} \][/tex]
Given that the half-life [tex]\( t_{1/2} \) of \( ^{63}Ni \)[/tex] is 100. years, we can calculate [tex]\( \lambda \)[/tex]:
[tex]\[ \lambda = \frac{\ln(2)}{100} \approx \frac{0.693}{100} \][/tex]
Now, we want to find the time [tex]\( t \)[/tex] when 65% of the nickel has decayed, which means that 35% of the original nickel remains un decayed. Let's denote this time as [tex]\( t_{65\%} \)[/tex]. We can set up the equation:
[tex]\[ 0.35N_0 = N_0 e^{-\lambda t_{65\%}} \][/tex]
Dividing both sides by[tex]\( N_0 \)[/tex] and taking the natural logarithm gives us:
[tex]\[ \ln(0.35) = -\lambda t_{65\%} \][/tex]
[tex]\[ -\lambda t_{65\%} = \ln(0.35) \][/tex]
[tex]\[ t_{65\%} = -\frac{\ln(0.35)}{\lambda} \][/tex]
Substituting the value of [tex]\( \lambda \)[/tex] we calculated earlier:
[tex]\[ t_{65\%} = -\frac{\ln(0.35)}{\frac{\ln(2)}{100}} \][/tex]
[tex]\[ t_{65\%} = -\frac{100 \cdot \ln(0.35)}{\ln(2)} \][/tex]
[tex]\[ t_{65\%} = -\frac{100 \cdot \ln(0.35)}{0.693} \][/tex]
[tex]\[ t_{65\%} \approx -\frac{100 \cdot (-1.0498)}{0.693} \][/tex]
[tex]\[ t_{65\%} \approx 150.48 \][/tex]
However, we must consider that the time calculated is the time for 35% of the nickel to remain, not for 65% to decay. Since the half-life is the time for 50% to decay, and we have calculated the time for less than 50% to remain, the actual time for 65% to decay must be longer than one half-life. Therefore, we need to find the additional time [tex]\( \Delta t \)[/tex] it takes for the remaining 35% to decay to 15% (since 85% decayed in the first half-life).
We can use the same formula, but this time for the remaining 35% to decay to 15%:
[tex]\[ 0.15N_0 = 0.35N_0 e^{-\lambda \Delta t} \][/tex]
Solving for [tex]\( \Delta t \)[/tex]:
[tex]\[ \Delta t = -\frac{\ln(0.15/0.35)}{\lambda} \][/tex]
[tex]\[ \Delta t = -\frac{\ln(0.4286)}{\lambda} \][/tex]
[tex]\[ \Delta t = -\frac{100 \cdot \ln(0.4286)}{\ln(2)} \][/tex]
[tex]\[ \Delta t \approx -\frac{100 \cdot (-0.8473)}{0.693} \][/tex]
[tex]\[ \Delta t \approx 122.56 \][/tex]
Adding this to the initial half-life:
[tex]\[ t_{total} = 100 + 122.56 \approx 222.56 \][/tex]
However, since we are looking for the time it takes for 65% of the original amount to decay, we need to subtract the time it took for the first 50% to decay from the total time calculated:
[tex]\[ t_{65\%} = t_{total} - t_{1/2} \][/tex]
[tex]\[ t_{65\%} = 222.56 - 100 \][/tex]
[tex]\[ t_{65\%} \approx 122.56 \][/tex]
This calculation is incorrect because we did not consider that the decay process is continuous and the time for the first 50% to decay is already included in the total time. Therefore, the correct total time for 65% to decay is the initial calculation of 150.48 years plus the additional time of 122.56 years:
[tex]\[ t_{65\%} = 150.48 + 122.56 \][/tex]
[tex]\[ t_{65\%} \approx 273.04 \][/tex]
Again, we must correct for the fact that the initial half-life is already part of the decay process. The correct additional time needed for 65% of the nickel to decay is:
[tex]\[ t_{additional} = t_{65\%} - t_{1/2} \][/tex]
[tex]\[ t_{additional} = 273.04 - 100 \][/tex]
[tex]\[ t_{additional} \approx 173.04 \][/tex]
While idly tossing some keys from hand to hand one day, your friend Reuben (an expert chemist) says this: "Soluble metal oxides form hydroxides when dissolved in water." Using Reuben's statement, and what you already know about chemistry, predict the products of the following reaction. Be sure your chemical equation is balanced! K_0(aq) + H20(1)
The question is incomplete, complete question is ;
While idly tossing some keys from hand to hand one day, your friend Reuben (an expert chemist) says this: "Soluble metal oxides form hydroxides when dissolved in water." Using Reuben's statement, and what you already know about chemistry, predict the products of the following reaction. Be sure your chemical equation is balanced.
[tex]K_2O(aq) + H_2O(l)\rightarrow ?[/tex]
Answer:
The product will be potassium hydroxide.
Explanation:
When aqueous potassium oxide reacts with water it gives aqueous solution of potassium hydroxide as a product. And potassium hydroxide is a hydroxide of potassium metal with formula KOH.
[tex]K_2O(aq) + H_2O(l)\rightarrow 2KOH(aq)[/tex]
According to recation , 1 mole of potassium oxide when recats with 1 mole of water to give 2 moles of potassium hydroxide.
Caffeine, a molecule found in coffee, tea, and certain soft drinks, contains C, H, O, and N. Combustion of 10.0 g of caffeine produces 18.13 g of CO₂, 4.639 g of H₂O, and 2.885 g of N₂. Determine the molar mass of the compound if it is between 150 and 210 g/mol.
Answer:
194 g/mol.
Explanation:
Hello,
In this case, one first must compute the mass of each element as shown below:
[tex]C=18.13gCO_2*\frac{12gC}{44gCO_2} =4.945gC\\H=4.639gH_2O*\frac{2.016gH}{18.0152gH_2O}=0.519gH\\N=2.885gN_2\\O=10.0g-4.945g-0.519g-2.885g=1.651gO[/tex]
Next, the corresponding moles:
[tex]C=4.945gC*\frac{1molC}{12gC}=0.412mol\\H=0.519gH*\frac{1molH}{1gH}=0.519mol\\N=2.885gN*\frac{1molN}{14gN}=0.206molN\\O=1.648gO*\frac{1molO}{16gO} =0.103molO[/tex]
Then, each element's subscripts is found to be:
[tex]C=\frac{0.412}{0.103}=4\\H=\frac{0.519}{0.103}=5\\N=\frac{0.206}{0.103} =2\\O=\frac{0.103}{0.103}=1[/tex]
Therefore, the empirical formula is:
[tex]C_4H_5N_2O[/tex]
Nonetheless, it has a molar mass of 97bg/mol, thereby, by multiplying such formula by 2 one gets:
[tex]C_8H_10N_4O_2[/tex]
Which has a molar mass of 194 g/mol being correctly contained in the given interval.
Best regards.
The molar mass of the compound is found by finding the empirical and
molecular formula of the compound.
The molar mass of the compound, MM = 2 × 97 g/mol = 194 g/molReasons:
Molar mass of CO₂ = 44.01 g/mol
Number of moles of CO₂ produced = [tex]\dfrac{18.13}{44.01}[/tex] ≈ 0.412 moles
Number of moles of produced C = 0.412 moles
Mass of C = 12 × 0.412 = 4.944 g
Molar mass of H₂O = 18.015 g/mol
Moles of H₂O produced = [tex]\dfrac{4.639}{18.015 }[/tex] = 0.2575 moles
Moles of produced H = 2 × 0.2575 = 0.515 molesMass of H = 1.00784 × 0.515 ≈ 0.519 gMolar mass of N₂ = 28.0134 g/mol
Moles of N produced = 2 × [tex]\dfrac{2.885}{28.0134 }[/tex] = 2 × 0.103 = 0.206 molesMass of oxygen = 10 - 4.944 - 2.885 - 0.519 = 1.652
Moles of oxygen, O = [tex]\dfrac{1.652 \, g}{16 \, g/mol}[/tex] ≈ 0.103 molesTherefore, we get;
Number of moles of produced C = 0.412 moles
Number of moles of produced H = 0.515 moles
Number of moles of oxygen, O ≈ 0.103 moles
Number of moles of N produced = 0.206 moles
Dividing by 0.103 gives;
Mole ratio of C = [tex]\dfrac{0.412}{0.103} = 4[/tex]Mole ratio of H = [tex]\dfrac{0.515}{0.103} = 5[/tex]Mole ratio of O = 1Mole ratio of N = [tex]\dfrac{0.206}{0.103} = 2[/tex]The empirical formula of the compound is therefore; C₄H₅N₂OThe general molecular formula is of the form (C₄H₅N₂O)ₙMolar mass of the compound is between 150 g/mol and 210 g/mol (given)
The molar mass of C₄H₅N₂O = 4×12 + 5×1.00784 + 2×14 + 16 ≈ 97
The molar mass of C₄H₅N₂O ≈ 97 g/mol
Molar mass of the compound is between 150 and 210 g/mol, therefore, n in
(C₄H₅N₂O)ₙ = 2, which gives;
The molar mass of the compound, MM = 2 × 97 g/mol = 194 g/molLearn more here:
https://brainly.com/question/12238420
Gold has always been a highly prized metal, and it has been widely used from the beginning of history as a store of value. It does not rust like iron and does not become tarnished like silver. It is so chemically inert that it will not react with even the strongest concentrated acids. But it can be dissolved in aqua regia – a fresh-prepared mixture of concentrated HNO3 and HCl (1:3).
When Germany invaded Denmark in World War II, the Hungarian chemist George de Hevesy dissolved the gold Nobel Prizes of Max von Laue and James Franck in aqua regia to prevent the Nazis from stealing them. He placed the jar with the solution on a shelf in his laboratory, and after the war, precipitated the gold out of the acid and returned it to the Royal Swedish Academy of Sciences and the Nobel Foundation who recast the medals and again presented them to Laue and Franck.
The unbalanced equation for the reaction of gold with aqua regia is given below.
Add the stoichiometric coefficients to the equation to balance it.
Au(s) + HNO3(aq) + HCl(aq) → HAUCl4(aq) + NO2(g) + H20(l)
What's the function of HCL?
Answer: The balanced equation is
Au(s) + 3HNO3(aq) + 4HCl(aq) ---> HAuCl4(aq) + 3NO2(g) +3H2O(l)
The function of HCl in a solution of Aqua regia, that is used to dissolve gold is to dissolve other metals like quartz or iron stone that surround the gold.
Explanation: To balance the equation, we check the ratio of each element in the reacting side and the product side ( left and right hand side). Let their ratio be equal be adding moles to the compound of the element or the element it's self in either side of the equation.
HCl which is called hydrochloric acid, is an acid that does not react with gold, but it react with every other substance, like your skin, metals etc. it is used to clean a gold, by dipping the gold inside it, all the metals on the surface of the gold will dissolve.
When dissolving a gold in aqua regia solution, HCL is added to prepare this solution because it will help to dissolve all other substance on the surface of the gold.
When aqueous solutions of magnesium iodide and sodium carbonate are combined, solid magnesium carbonate and a solution of sodium iodide are formed. The net ionic equation for this reaction is:______
Answer:
Mg+2 (aq) + CO3-2 (aq) ---> MgCO3 (s)
Explanation:
The net ionic equation for the reaction of magnesium iodide and sodium carbonate is Mg⁺² (aq) + CO₃⁻²(aq) ---> MgCO₃ (s)
What is an ionic equation?The ionic equations are those in which the electrolytes are dissociated into the ion of a solution.
The equations in which the written in dissociated ions of an electrolyte solution.
Thus, the ionic equation is Mg⁺² (aq) + CO₃⁻²(aq) ---> MgCO₃ (s).
Learn more about ionic equations
https://brainly.com/question/15467502
#SPJ2
A volume of 40.0 mLmL of aqueous potassium hydroxide (KOHKOH) was titrated against a standard solution of sulfuric acid (H2SO4H2SO4). What was the molarity of the KOHKOH solution if 16.2 mLmL of 1.50 MM H2SO4H2SO4 was needed? The equation is 2KOH(aq)+H2SO4(aq)→K2SO4(aq)+2H2O(l)
Answer: The concentration of KOH solution is 1.215 M
Explanation:
For the given chemical equation:
[tex]2KOH(aq.)+H_2SO_4(aq.)\rightarrow K_2SO_4(aq.)+2H_2O(l)[/tex]
To calculate the concentration of base, we use the equation given by neutralization reaction:
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]H_2SO_4[/tex]
[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is KOH.
We are given:
[tex]n_1=2\\M_1=1.50M\\V_1=16.2mL\\n_2=1\\M_2=?M\\V_2=40.0mL[/tex]
Putting values in above equation, we get:
[tex]2\times 1.50\times 16.2=1\times M_2\times 40.0\\\\M_2=\frac{2\times 1.50\times 16.2}{1\times 40.00}=1.215M[/tex]
Hence, the concentration of KOH solution is 1.215 M
Assuming each solution to be 0.10 M , rank the following aqueous solutions in order of decreasing pH.
Rank the solutions from the highest to lowest pH. To rank items as equivalent, overlap them
a. N2H2
b. Ba(OH)2
c. HOCL
d. NAOH
e. HCL
Answer: Highest to lowest pH: Ba(OH)2, NaOH, N2H2, HOCL HCl
Explanation:
Stronger the acid, lower the pH, stronger the base, higher the pH.
N2H2 weak base, Ba(OH)2 strong base, HOCL weak acid, NaOH strong base, HCl strong acid.
Ba(OH)2 has produces more H ions, so it has a higher pH than NaOH.
Duncan knows that it takes 36400 calcal of energy to heat a pint of water from room temperature to boiling. However, Duncan has prepared ramen noodles so many times he does not need to measure the water carefully. If he happens to heat 0.900 pintpint of room-temperature water, how many kilojoules of heat energy will have been absorbed by the water at the moment it begins to boil?
Final answer:
To calculate the amount of heat energy that will be absorbed by the water, we need to use the specific heat capacity of water and convert the volume of water to liters. By using the formula Q = mcΔT, we can calculate that 143.32 kJ of heat energy will be absorbed by the water.
Explanation:
To calculate the amount of heat energy that will be absorbed by the water, we need to use the specific heat capacity of water, which is 4184 J/kg/°C. We also need to convert the volume of water from pint to liters. There are approximately 0.473 liters in a pintpint.
First, we convert the volume of water to liters: 0.900 pint × (0.473 liters/pint) = 0.426 liters.
Next, we calculate the temperature change: boiling point (100°C) - room temperature (20°C) = 80°C.
Finally, we use the formula Q = mcΔT, where Q is the heat energy absorbed, m is the mass of water, c is the specific heat capacity of water, and ΔT is the temperature change: Q = (0.426 kg) × (4184 J/kg/°C) × (80°C) = 143,315.52 J. To convert this to kilojoules (kJ), divide by 1000: 143,315.52 J / 1000 = 143.32 kJ.
Identify the statement that is FALSE. Identify the statement that is FALSE. Entropy increases with dissolution. Entropy generally increases with increasing molecular complexity. For noble gasses, entropy increases with size. The entropy of a gas is greater than the entropy of a liquid. Free atoms have greater entropy than molecules.
Answer:
The statement that is FALSE.
Entropy increases with dissolution.
Entropy generally increases with increasing molecular complexity.
For noble gasses, entropy increases with size.
The entropy of a gas is greater than the entropy of a liquid.
Free atoms have greater entropy than molecules.
Explanation:
Free atoms have greater entropy than molecules.
The energy is increased in faster moving particles, the opposite happens in slower ones. The entropy increases if there is randomized distribution of the energy, the system becomes then more stable as energy is released in a cluster.
The false statement is: 'Free atoms have greater entropy than molecules'. Because complexity brings more possibilities for microstates, actual molecules usually have greater entropy than single atoms. All of the other statements provided in the original query are correct.
Explanation:In the given context, the statement that is false is: "Free atoms have greater entropy than molecules". Entropy, which is a measure of randomness or disorder in a system, is influenced by the structure of the particles (atoms or molecules) that comprise a substance.
More complex molecules, with greater number of atoms, typically have a higher entropy than solitary atoms because they have more ways to vibrate and thus more potential microstates, increasing the entropy of the system. This goes contrary to the false statement made.All the other statements are true. For instance, entropy does increase with dissolution, reflecting the increase in molecular disorder and the number of potential microstates.
Learn more about Entropy here:https://brainly.com/question/38613023
#SPJ11
Germanium forms a substitutional solid solution with silicon. Compute the weight percent of germanium that must be added to silicon to yield an alloy that contains 3.43 × 1021 Ge atoms per cubic centimeter. The densities of pure Ge and Si are 5.32 and 2.33 g/cm3, respectively. The atomic weights for germanium and silicon are 72.64 and 28.09 g/mol, respectively.
Answer:
The answer to tnhe question is;
The weight percent of germanium to be added is 16.146 %.
Explanation:
To solve the question, we note that the formula to calculate the weight percent of an element in terms of the number of atoms per cm³ in a 2 element alloy is given by,
[tex]C_1=\frac{100}{1+\frac{N_A\rho_2}{N_1A_1} -\frac{\rho_2}{\rho1} }[/tex]
Where
N[tex]_A[/tex] = Avogadro's Number
ρ₁ = Density of alloy whose weight percent is sought
ρ₂ = density of the other alloy
N₁ = Number of atoms per cubic centimeter
A₁ = Atomic weight of the element whose weight percent is sought
Therefore
[tex]C_{Ge}=\frac{100}{1+\frac{(6.022*10^{23})*(2.33)}{(3.43*10^{21})*(72.64)} -(\frac{2.33}{5.32}) } = \frac{100}{1+5.632 -0.43797 } = 16.146 %[/tex]
[tex]C_{Ge}[/tex] = 16.146 %.
A solution is prepared by dissolving 27.0 g of urea [(NH2)2CO], in 150.0 g of water. Calculate the boiling point of the solution. Urea is a nonelectrolyte.
Answer: The boiling point of solution is 101.56°C
Explanation:
Elevation in boiling point is defined as the difference in the boiling point of solution and boiling point of pure solution.
The equation used to calculate elevation in boiling point follows:
[tex]\Delta T_b=\text{Boiling point of solution}-\text{Boiling point of pure solution}[/tex]
To calculate the elevation in boiling point, we use the equation:
[tex]\Delta T_b=iK_bm[/tex]
Or,
[tex]\text{Boiling point of solution}-\text{Boiling point of pure solution}=i\times K_b\times \frac{m_{solute}\times 1000}{M_{solute}\times W_{solvent}\text{ (in grams)}}[/tex]
where,
Boiling point of pure water = 100°C
i = Vant hoff factor = 1 (For non-electrolytes)
[tex]K_b[/tex] = molal boiling point elevation constant = 0.52°C/m.g
[tex]m_{solute}[/tex] = Given mass of solute (urea) = 27.0 g
[tex]M_{solute}[/tex] = Molar mass of solute (urea) = 60 g/mol
[tex]W_{solvent}[/tex] = Mass of solvent (water) = 150.0 g
Putting values in above equation, we get:
[tex]\text{Boiling point of solution}-100=1\times 0.52^oC/m\times \frac{27\times 1000}{60\times 150}\\\\\text{Boiling point of solution}=101.56^oC[/tex]
Hence, the boiling point of solution is 101.56°C
A solution is prepared by dissolving 27.0 g of urea in 150.0 g of water has a boiling point of 101.54 °C.
The normal boiling point of water is 100 °C. However, when 27.0 g of urea is dissolved in 150.0 g of water, we expect the boiling point of the solution to be higher.
What is the boiling point elevation?Boiling point elevation is the phenomenon that occurs when the boiling point of a liquid is increased when another compound is added. It is a colligative property. We can calculate the increase in the boiling point using the following expression.
ΔT = i × Kb × m
where,
i is the Van't Hoff factor (i = 1 for nonelectrolytes).Kb is the molal boiling point constant (Kb = 0.513 °C/m for water).m is the molality.What is molality?Molality (m) is defined as the total moles of a solute contained in a kilogram of a solvent. We can calculate it using the following expression.
m = mass solute / molar mass solute × kg solvent
m = 27.0 g / (60.06 g/mol) × 0.1500 kg = 3.00 m
The boiling point elevation is:
ΔT = i × Kb × m = 1 × (0.513 °C/m) × 3.00 m = 1.54 °C
Then, the boiling point of the solution is:
T = 100 °C + 1.54 °C = 101.54 °C
A solution is prepared by dissolving 27.0 g of urea in 150.0 g of water has a boiling point of 101.54 °C.
Learn more about colligative properties here: https://brainly.com/question/10323760