Answer: 2N in Daniel's direction.
Explanation:
Since, both of them are playing a game of tug and war, the resultant(net) force consists of opposing forces.
Net force= 12N-10N = 2N
And the net force is in Daniel's direction because Daniel exerted greater force.
In the tug-of-war scenario between John and Daniel, the net force is 2 N in Daniel's direction, as his force is 12 N compared to John's 10 N. The forces are unbalanced with the larger force determining the direction of the net force.
When John and Daniel play tug-of-war, John exerts a force of 10 N while Daniel exerts a slightly higher force of 12 N. To find the net force, we consider the direction of the forces as well. Since they are exerting forces in opposite directions, the net force is the difference between the two forces. Therefore, the net force is 12 N (Daniel's force) - 10 N (John's force) = 2 N in the direction of the larger force, which is Daniel's direction.
Understanding tug-of-war forces is an interesting way to conceptualize the principles of balanced and unbalanced forces. In this case, the forces are unbalanced because one player is exerting more force than the other, causing the net force to shift in one direction.
if a mint is on a turn table that is rotating at 34 RPM’s, and is 23 (cm) away from the center of the record, what is the Tangential Acceleration?
Answer:
The tangential acceleration is zero
Explanation:
Tangential Acceleration
It's a measure of how fast is the tangential velocity changing when the object has rotational motion. It's perpendicular to the centripetal acceleration and equal to the product of the angular acceleration by the radius of rotation. In a uniform circular motion, the angular speed is constant, i.e. the angular acceleration is zero.
If the tangential acceleration was different from zero, the rotating object would change its angular and tangential velocities.
The turntable is rotating at a constant speed, so, regardless of the position of the mint, its tangential acceleration is zero
A wave with a high pitch and a quiet sound will have
Group of answer choices
a short wavelength and a low amplitude
a short wavelength and a high amplitude
a big wavelength and a high amplitude
a big wavelength and a low amplitude
Answer:
A)- SHORT WAVELENGTH AND LOW AMPLITUDE.
Explanation:
high pitch sound waves possess low wavelength and
quiet sound means that amplitue of the sound wave is low.
therefore option A matches the answer most.
Answer:
A)- SHORT WAVELENGTH AND LOW AMPLITUDE.
Explanation:
high pitch sound waves possess low wavelength and
quiet sound means that amplitue of the sound wave is low.
therefore option A matches the answer most.
why is it important for digestive system functions that mucous membranes can secrete and absorb susbstances?
Answer:
It pushes food through the GI tract. The inside of GI tract is lined with mucous membranes. Mucous membranes are moist tissues that can secrete and absorb substances. The ability to secrete and absorb substances is necessary for the functions of the digestive system.
Explanation:
Can I have brainliest?
Mucous membranes in the digestive system secrete mucus and absorb nutrients, which is vital for its functioning.
Explanation:The mucous membranes lining the digestive system have the ability to secrete and absorb substances, which is important for the functioning of the digestive system.
They secrete mucus that lubricates and protects the digestive tract, preventing damage from harsh stomach acids and facilitating the smooth movement of food.
They also absorb nutrients and water from the digested food, allowing the body to efficiently extract energy and essential substances.
Learn more about mucous membranes in the digestive system here:https://brainly.com/question/7117483
#SPJ2
Please help I don't know how to answer these questions!
discuss how energy conservation applies to a pendulum.
Where is the potential energy the most?
Where is the potential energy the least?
Where is kinetic energy the most?
Where is kinetic energy the least?
1) The potential energy is the most at the highest position and the least at the equilibrium position
2) The kinetic energy is the most at the equilibrium position and the least at the highest position
Explanation:
1)
The potential energy of an object is the energy possessed by the object due to its position in a gravitational field; mathematically, it is given by
[tex]PE=mgh[/tex]
where
m is the mass of the object
g is the strength of the gravitational field
h is the height of the object relative to the ground
For the pendulum in this problem, m is the mass of the bob, and h is the height of the above relative to the ground. We see from the formula that the potential energy is directly proportional to the height:
[tex]PE\propto h[/tex]
This means that:
The potential energy is the most when the bob is at the highest positionThe potential energy is the least when the bob is at the equilibrium position, which is the lowest position2)
We can solve this part by applying the law of conservation of energy: in fact, the total mechanical energy of the pendulum (sum of potential and kinetic energy) is constant at any time during the motion,
[tex]E=KE+PE=const.[/tex]
where KE is the kinetic energy.
From the equation above, we observe that:
When PE is maximum, KE must be at minimumWhen PE is minimum, KE must be maximumTherefore, this implies that:
The kinetic energy is the most when the potential energy is the least, i.e. at the equilibrium positionThe kinetic energy is the least when the potential energy is the most, i.e. at the highest positionLearn more about kinetic and potential energy:
brainly.com/question/6536722
brainly.com/question/1198647
brainly.com/question/10770261
#LearnwithBrainly
A new ride being built at an amusement park includes a vertical drop of 71.6 meters. Starting from rest the ride vertically drops that distance before the track curves forward. If the velocity at the bottom of the drop is 10.0 m/s and the mass of the cart and passengers is 3,5x10^4kg, how much potential energy was converted into thermal energy? 2.3x10^7, 2.6x10^7, 4.3x107, 6.7x10^7
Answer:
We can conclude 2.3x10^7 J was converted to thermal energy
Explanation:
Energy Conservation
According to the law of conservation of energy, the total energy of an isolated system must be constant. If some kind of energy is 'lost', we know it was transformed into another type.
Let's check the conditions of the problem. The ride vertically drops a distance of 71.6 m starting from rest, and at the bottom of the drop, its speed is 10 m/s. Knowing the mass of the cart plus passengers is 3.5X10^4 kg, we compute the total energy at the top of the drop.
[tex]E=U+K[/tex]
Where E is the total energy (which must be conserved) at the top of the drop, U is the gravitational potential energy and K is the kinetic energy. We use the equations for each:
[tex]U=m.g.h[/tex]
[tex]\displaystyle K=\frac{mv^2}{2}[/tex]
[tex]\displaystyle E=m.g.h+\frac{mv^2}{2}[/tex]
At the top, the speed is 0, thus
[tex]\displaystyle E=m.g.h=(35000)(9.8)(71.6)=2.5X10^7\ J[/tex]
Now we compute the 'total' energy at the bottom (quoted because we know there is some mechanical energy loss in the drop)
[tex]\displaystyle E'=m.g.h'+\frac{mv'^2}{2}[/tex]
This time h'=0 and v=10 m/s, thus
[tex]\displaystyle E'=\frac{(35000)10^2}{2}=1.8x10^6\ J[/tex]
The mechanical energy at the top and the bottom are not the same, thus we can know part of it was converted to heat or thermal energy. We compute the difference
[tex]2.5x10^7\ J-1.8x10^6\ J=2.3x10^7\ J[/tex]
We can conclude 2.3x10^7 J was converted to thermal energy
Picture attached please help! 2 different questions!
Wave A would have higher amplitude
Hope this helps :D
Wave A has higher amplitude because it is stretched out and the energy of the sound wave is loud
P.S. hope this is helpful
Explanation:
A cart rolling down an incline for 5.0 seconds has an acceleration of 4.0 m/s .If the cart has an initial speed of of 2.0 m/s ,what’s its final speed.
Applying
v=u+a.t
(all the symbols are bearing their conventional meaning)
Here,u=2ms−1,t=5,a=4ms−2
So,v=2+4⋅5=22ms−1
Mark as BrainliestAnswer:
22m/s
Explanation:
V = u + at
= 2 + ( 4x5)
= 2 + 20
= 22m/s
Sally and Conrad were arguing over the difference between a transverse wave and a longitudinal wave. Sally said that mechanical waves could be either transverse or longitudinal. Conrad said that sound waves were longitudinal and not transverse. Who is correct and why?
Group of answer choices
Neither are correct.
Only Conrad is correct because sound waves are not transverse waves.
Only Sally is correct because longitudinal waves and transverse waves are mechanical waves.
Both are correct since sound waves are mechanical waves.
Both are correct since sound waves are mechanical waves.
Option: D.
Explanation:
A wave is a recurring event that transfers energy through vibrations. It caused by the disturbance movement in a medium. The medium can be solid, liquid or gas and it can come in many forms and shapes.
If the particles in the medium moved in the perpendicular direction to the wave is called transverse wave and if those particles moved in the parallel direction to the wave then it is a longitudinal wave.
Mechanical waves require a medium to transfer that energy. Moreover, based on the medium properties ( inertial and elastic) it can be changed as either transverse or longitude.
In, sound wave the particles will move in the parallel direction to the wave. Also, it comes under mechanical wave since it requires an air medium to travel.
A motorcycle is traveling along a highway at 26 m/s. How far does the motorcycle travel in 15 s?
The total distance travelled will be 390 m.
We have a motorcycle travelling on a Highway.
We have to find the distance travelled by the motorcycle in 15 seconds.
What is distance ?The distance covered by the body moving with speed 's' in time 't' is given by the relation -
Distance (d) = s x t
According to the question -
Average speed = s = 26 m/s
Time = t = 15 s
Distance = s x t = 26 x 15 = 390 m
Therefore, the total distance travelled will be 390 m.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/21092131
#SPJ2
What is the mass of a baseball thrown at 25 m/s resulting in a momentum of 10 kg·m/s?
Answer: m = 0.4 kg
Explanation: Momentum is the product of mass and velocity also expressed in this equation:
p = m x v
Derive to find m
m = p / v
= 10 kg•m/s / 25 m/s
= 0.4 kg
The mass of baseball is 0.4 kg.
Given data:
The velocity of the baseball is, v = 25 m/s.
The resulting momentum of baseball is, p = 10 kg-m/s.
The momentum of any object is defined as the impact produced by the applied force. Hence it is expressed at the product of mass and velocity. The expression for the momentum is,
[tex]p = mv[/tex]
here, m is the mass of baseball.
Solving as,
[tex]10 = m \times 25\\\\m = 0.4 \;\rm kg[/tex]
Thus, we can conclude that the mass of baseball is 0.4 kg.
Learn more about the momentum here:
https://brainly.com/question/19689434
4. A ball has 17J of kinetic energy (KE) and its mechanical energy is 25J. What is the speed of the
ball? The ball has a mass of 3.2 kg.
Answer:3.25914099112
Explanation:
Do you have the formula? I pretty sure this is correct but I’m not sure
Speed of ball is 3.2 m/s (Approx.)
Given that;
Kinetic energy (KE) = 17 J
Mechanical energy = 25 J
Mass of ball = 3.2 kg
Find:
Speed of ball
Computation:
Kinetic energy (KE) = [1/2][mv²]
17 = [1/2][(3.2)v²]
17 = [1.6][v²]
v² = 17 / 1.6
v² = 10.625
v = √10.625
v = 3.2596
Speed of ball (v) = 3.2 m/s (Approx.)
Learn more:
https://brainly.com/question/12669551?referrer=searchResults
In which of these situations, is mechanical energy being conserved? (Neglect, air resistance, friction and breaking) Check all that apply.
Child on a swing
Pendulum
Bow and Arrow
Roller Coaster
Mechanical energy is conserved in all the four situations
Explanation:
The law of conservation of energy states that in absence of non-conservative forces (such as air resistance of friction), the mechanical energy of an object is conserved.
The mechanical energy of an object is the sum of its potential energy (PE) and its kinetic energy (KE):
E = PE + KE = const.
In all the situations described, there are no air resistance or friction acting on the system, therefore mechanical energy is conserved in all the four situations described.
Learn more about kinetic and potential energy:
brainly.com/question/6536722
brainly.com/question/1198647
brainly.com/question/10770261
#LearnwithBrainly
If the sine of an angle is 4/7 what is the cosine of its complement.
Answer: 0.57
Explanation:
Let's begin by explaining that two angles are complementary when they sum is [tex]90\°[/tex]:
[tex]\theta + \alpha=90\°[/tex]
Having this clear, let's find [tex]\theta[/tex] from the following trigonometric function:
[tex]sin \theta=\frac{4}{7}[/tex]
[tex]\theta=sin^{-1} (\frac{4}{7})=34.84 \°[/tex]
Now that we have the value of [tex]\theta[/tex], let's find [tex]\alpha[/tex]:
[tex]\alpha=90\°-\theta[/tex]
[tex]\alpha=90\°-34.84 \°[/tex]
[tex]\alpha=55.15\°[/tex] This is the complement of angle [tex]\theta[/tex]
Then, the cosine of the complement [tex]\alpha[/tex] is:
[tex]cos \alpha=cos(55.15\°)[/tex]
[tex]cos \alpha=0.57[/tex] This is the answer
Plate A and Plate B are both made of continental plate material where they touch. What will happen as the plates press together?
Answer:
Plate A and Plate B are both made of continental plate material where they touch. What will happen as the plates press together? The edges of both plates will be pushed upward as the plates continue to move toward each other.
Explanation:
When two continental plates collide with each other and they fold the rock at the boundary, lifting up, and leading to the formation of mountains and mountain ranges.
What are continental plates?Tectonic plates are pieces of the crust of the earth and the uppermost mantle, together referred to as the lithosphere. The plates are around 100 km thick and consist of two types of material: oceanic crust and continental crust which generally have silicon and aluminum.
When two continental plates collide, the edge of one plate is thrust onto that of the other plate. The rocks in the lower slab undergo changes in their mineral content due to heat and pressure and will probably become exposed at the surface.
Rocks changed to new mineral assemblages due to changing temperatures and pressures are known as metamorphic. The regions of the crust undergo melting and subsequent extrusion of melt magma appears at the surface as volcanic rocks that rise to form granites at high crustal levels lead to the formation of mountains.
Learn more about the continental plate, here:
https://brainly.com/question/3994513
#SPJ2
A remote control car is traveling at a velocity of 0.50 m/s when it hits a wall and comes to a stop in 0.050 seconds. What is the acceleration of the car?
Answer:0.50m/s divide by 0.050sec = 10m/s
Explanation: dividing the meter per second [m/s] by the second [s
What is the fuel of an aeroplane.?
Answer: Jet fuel
Explanation:
Jet fuel is a clear to straw-colored fuel, based on either an unleaded kerosene (Jet A-1), or a naphtha-kerosene blend (Jet B). Similar to diesel fuel, it can be used in either compression ignition engines or turbine engines.
Answer:
the fuel of an aeroplane is called gasoline
Two golf balls with the same mass were hit at the same time. Golf ball A went a shorter distance than golf ball B. What could be a reason that this happened?
Golf ball B experienced more friction.
Golf ball A experienced less friction.
Golf ball B was hit with a weaker force.
Golf ball A was hit with a weaker force.
Answer:
Golf ball A was hit with a weaker force
Explanation:
Golf ball B went a larger distance than golf ball A, so we could think friction affected golf ball A rather than golf ball B. That is why the first two choices are wrong.
The strongest forced applied made golf ball B go further.
Golf ball A went a shorter distance than golf ball B because Golf ball A was hit with a weaker force. Therefore, option D is correct.
What is acceleration?The rate of change of an object's velocity with respect to time is known as acceleration. The acceleration exhibits both magnitude and direction so it is a vector.
The second derivative of position w.r.t. time can be used to calculate the acceleration and the 1st derivative of the object's velocity w.r.t. time.
The net of all external forces acting in magnitude is directly proportional to this net resulting force. The magnitude of the acceleration is inversely proportional to the object's mass. From Newton's second law of motion we can deduce the acceleration:
F = ma ⇒ a = F/m
As both balls have the same mass so the ball hit with lesser force will have less acceleration and cover a shorter distance.
Learn more about acceleration, here:
brainly.com/question/3046924
#SPJ3
A test taker makes an estimate for a 30–second time interval. The estimate is 34.5 seconds. What is the percent error in this example?
Answer:
Its a 30 second interval
Explanation:
Two cans of spam with identical masses collide. Before the collision, the hickory smoke flavor is moving to the left at 4m/s while the hot and spicy flavor is moving to the right at 2 m/s. After the collision, the hickory smoke is moving to the left at 1.2 m/s. What is their final velocity of the hot and spicy? Is this collision elastic?
1) Final velocity: 0.8 m/s to the left
2) This is not an elastic collision
Explanation:
1)
We can solve this problem by applying the law of conservation of momentum: in fact, if there are no external forces, the total momentum of the two cans must be conserved before and after the collision.
Mathematically:
[tex]p_i = p_f\\mu_1 + mu_2 = mv_1 + mv_2[/tex]
where:
m is the mass of each can
[tex]u_1 = -4 m/s[/tex] is the initial velocity of the first can (we take to the left as negative direction)
[tex]u_2 = 2 m/s[/tex] is the initial velocity of the second can (to the right, positive)
[tex]v_1 = -1.2 m/s[/tex] is the final velocity of the first can (the hickory one)
[tex]v_2[/tex] is the final velocity of the 2nd can (the hot and spicy one)
Re-arranging the equation and solving for v2, we find:
[tex]v_2 = u_1 + u_2 - v_1 = (-4) + (+2) - (-1.2)=-0.8 m/s[/tex]
So, the final velocity of the hot and spicy can is 0.8 m/s to the left.
2)
There are two types of collisions in physics:
Elastic collision: the total kinetic energy is conservedInelastic collision: the total kinetic energy is not conservedIn order to check if this collision is elastic or not, we need to compare the kinetic energy before the collision to the kinetic energy after the collision.
Before the collision:
[tex]K_i = \frac{1}{2}mu_1^2 + \frac{1}{2}mu_2^2 = \frac{1}{2}m(-4)^2+\frac{1}{2}m(2)^2=10m[/tex]
After the collision:
[tex]K_f = \frac{1}{2}mv_1^2 + \frac{1}{2}mv_2^2 = \frac{1}{2}m(-1.2)^2+\frac{1}{2}m(-0.8)^2=1.04m[/tex]
We see that the final kinetic energy is less than the initial kinetic energy: part of the kinetic energy has been converted into other forms of energy during the collision, therefore this is NOT an elastic collision.
Learn more about collisions:
brainly.com/question/13966693#
brainly.com/question/6439920
#LearnwithBrainly
Which forces affect a baseball's speed as it rises after being hit by a bat?
A. net force and drag
B. applied force and net force
C. gravity and drag
D. applied force and gravity
C) Gravity and drag
Explanation:
Here we are considering the ball after it has been hit by a bat.
When the ball is in the air, there are only two forces acting on it:
The weight of the ball (force of gravity), acting downward. Its magnitude is given by [tex]F_g = mg[/tex], where m is the mass of the ball and g is the acceleration of gravityThe air drag, which is the resistance of the air on the ball, acting downward as well (it acts against the direction of motion of the ball). The magnitude of this force is proportional to the speed of the ballThere is no applied force on the ball, since that one only acts on the ball when it is in contact with the bat - however, when the ball is in the air, the applied force no longer acts on the ball.
Therefore, the correct answer is
C. gravity and drag
Learn more about forces:
brainly.com/question/11179347
brainly.com/question/6268248
#LearnwithBrainly
Answer:
C) Gravity and drag
Explanation:
Here we are considering the ball after it has been hit by a bat.
When the ball is in the air, there are only two forces acting on it:
The weight of the ball (force of gravity), acting downward. Its magnitude is given by , where m is the mass of the ball and g is the acceleration of gravity
The air drag, which is the resistance of the air on the ball, acting downward as well (it acts against the direction of motion of the ball). The magnitude of this force is proportional to the speed of the ball
There is no applied force on the ball, since that one only acts on the ball when it is in contact with the bat - however, when the ball is in the air, the applied force no longer acts on the ball.
Therefore, the correct answer is
C. gravity and drag
What is the relationship between the masses of the objects and the gravitational force between them?
Answer:
Gravitational force is directly proportional to the masses of the objects.
Explanation:
AS AIRPLANE WENT FROM 120 m/s to 180 m/s in 4.0 seconds what is the acceleration
Answer:15metre per second squ
I
Explanation:
acceleration=(final velocity-initial velocity)÷t
acceleration=(180-120)÷4
acceleration=60÷4
acceleration=15 metre per second square
A plastic-foam container used as a picnic cooler contains a block of ice at 0°C. If 225g of ice melts, how much heat passes through the walls of the container?
To determine the amount of heat passing through the walls of the container, we can calculate the rate of heat transfer through conduction using the formula q = k * A * (T2 - T1) / d. Once we have the rate of heat transfer, we can multiply it by the time to find the total heat transferred.
Explanation:To determine how much heat passes through the walls of the container, we need to calculate the heat transfer through conduction. The rate of heat transfer can be calculated using the formula q = k * A * (T2 - T1) / d, where q is the heat transfer, k is the thermal conductivity of the material, A is the surface area, T2 is the temperature outside the container, T1 is the temperature inside the container, and d is the thickness of the walls. We can then multiply the rate of heat transfer by the time to find the total heat transferred. In this case, the temperature outside the container is 35.0°C and the temperature inside the container is 0°C.
Let's calculate the heat transfer rate:
q = k * A * (T2 - T1) / d
Assuming the thermal conductivity of the plastic-foam material is known and given, we can substitute the values into the equation and calculate the rate of heat transfer. Once we have the rate of heat transfer, we can multiply it by the time to find the total heat transferred.
The Carbon-Oxygen cycle is regulated by three great reservoirs _____.
organisms
the atmosphere
the solar system
oceans
rocks.
multiple choice
The Carbon-Oxygen cycle is regulated by three great reservoirs "Organisms, Oceans and Rocks".
Answer: Option A, D and E
Explanation:
The steps of the carbon and oxygen cycle are:
In a process known as photosynthesis, plants consume carbon dioxide. The plants give off oxygen as a waste product during photosynthesis,thus respiration occur. The natural combustion processes are "volcanic eruptions" responsible for releasing carbon dioxide into the atmosphere due to burning, thus combustion occurs. After the death of unicellular or multicellular organism, finally decomposition take place.The atmosphere is the reservoir and regulated by the terrestrial biosphere freshwater bodies and non-living organic material like soil carbon, the sediments like fossil fuels and the oceans which involve dissolved inorganic carbon also living and non-living marine biota.
Answer:
a
d
e
Explanation:
The amount of gravity between 1kg of lead and Earth is ___ the amount of gravity between 1kg of marshmallows and Earth.
a. greater than
b. less than
c. the same as
d. none of the above
The amount of gravity between 1 kg of lead and Earth is the same as the amount of gravity between 1 kg of marshmallows and Earth.
Answer: Option C
Explanation:
According to universal law of gravity, the gravitational force is directly proportionate to the product of masses of the interacting objects and inversely proportionate to its distance squared between them.
Since the mass of Earth is very high compared to the mass of the other objects, be it lead or marshmallows, and the distance will be mostly same. Thus, there will be no change in the amount of gravity acting between them. Thus, the amount of gravity between 1 kg of lead and Earth is the same as the amount of gravity between 1 kg of marshmallows and Earth.
The amount of gravity between 1kg of lead and the Earth is the same as between 1kg of marshmallows and the Earth. The amount of gravity depends on the mass and distance, not on the material of the objects. This is based on Newton's law of universal gravitation.
Explanation:The amount of gravity that the Earth exerts on an object doesn't depend on the material of the object, but it does depend on the mass. Since both the 1kg of lead and the 1kg of marshmallows have the same mass, then the amount of gravity between them and the Earth is the same.
This principle is reflected in Newton's universal law of gravitation, expressed as F=G*(m1*m2)/r^2, where F is the force of gravity, m1 and m2 are the masses of the two objects, r is the distance between their centers, and G is the gravitational constant. Regardless of whether the object is made of lead or marshmallows, if the mass remains the same as 1kg, then the gravitational force, hence the gravity between the Earth and the object, will also be the same.
So, to answer your question, the amount of gravity between 1kg of lead and Earth is the same as the amount of gravity between 1kg of marshmallows and Earth.
Learn more about Newton's law of gravitation here:https://brainly.com/question/32884029
#SPJ2
Which two Bible verses state that Jesus Christ holds together everything in the universe by His power?
John 3:16
Colossians 1:17
Psalm 119:56
Hebrews 13
Answer:
Colossians 1:17
Explanation:
He is before all things, and in him all things hold together.
Answer:
John 3:16
Colossians 1:17
Explanation:
A ball is being thrown straight upward and rises to a maximum height of 12.0m above its launch point. At what height above it’s launch point has the speed of the ball decreased to one-half of its initial value
To determine the height at which the speed of the ball decreases to one-half of its initial value, we need to consider the vertical motion of the ball. By finding the time it takes for the ball to reach its maximum height and the time it takes for the speed to decrease on its way down, we can calculate the height above the launch point.
Explanation:The question is asking at what height above its launch point the speed of the ball decreases to one-half of its initial value. To determine this, we need to consider the vertical motion of the ball. Let's assume the launch point is at a height of 0 m.
Using the given information, we can find the time it takes for the ball to reach its maximum height using Equation 4.22. Then, we can calculate the time it takes for the speed of the ball to decrease to one-half of its initial value by finding the time it takes for the ball to reach the same height on its way down.
By considering the time it takes for the ball to reach its maximum height and the time it takes for the speed to decrease, we can determine the height above the launch point at which the speed is one-half of its initial value.
Learn more about Vertical motion of a thrown ball here:https://brainly.com/question/35881589
#SPJ12
Heated air moves from baseboard heaters to the rest of a room in a process called a radiation b conduction c insulation d convection
D. convection
Hope this helps :D
The graph below shows the force required to stretch a spring various distances. Review the graph below.
A graph of Force versus Elongation. Elongation (m) is on the x axis and Force (N) is on the y axis. A straight line passes through the points 0 comma 0 and 10 comma 15.
What is the best approximate value for the elastic potential energy (EPE) of the spring elongated by 7.0 meters?
1.5 J
11 J
37 J
74 J
Answer:
37 J
Explanation:
Given:
A graph of force versus elongation in which a line passes through the points (0, 0) and (10, 15).
The x-axis represents elongation and y-axis represents force.
Elongation (x) = 7.0 m
Now, we know that the slope of a line of force versus elongation graph is the value of the spring constant.
Therefore, finding the slope of the line passing through (0, 0) and (10, 15), we get:
[tex]k=\frac{15-0}{10-0}=1.5\ N/m[/tex]
Therefore, the spring constant (k) = 1.5 N/m.
Now, the elastic potential energy (EPE) of the spring is given as:
[tex]EPE=\frac{1}{2}kx^2[/tex]
Plug in 1.5 for 'k' and 7.0 for 'x'. Solve for EPE.
[tex]EPE=\frac{1}{2}\times 1.5\times (7.0)^2\\\\EPE=\frac{1.5\times 49}{2}\\\\EPE=36.75\approx 37\ J[/tex]
Therefore, the best approximate value for the elastic potential energy (EPE) of the spring elongated by 7.0 meters is 37 J.
What does the electron do in an atom?
Answer:
Electrons are the negatively charged particles of an atom.Together,all of the electrons of a atom create a negitive charge that balances the positive charge of the protons
Explanation: