Jin walked 4 km on a straight path to get to the sandwich shop. He traveled 30° south of east.

What is the southern component of Jin’s component, rounded to the nearest tenth?

Answer:

B) Boiling it at its boiling point

Explanation:

As we know that the heat required to convert the given substance from liquid to vapor at its boiling point is known as latent heat of vaporization

So here we know that

[tex]Q = mL[/tex]

here we know that

[tex]L = \frac{Q}{m}[/tex]

so it is known as the heat required to boil the given substance of unit mass at its boiling point

so correct answer will be

B) Boiling it at its boiling point

Answer:

Explanation:

In our previous articles, we observed the theoretical formulas of Ohm’s law, its calculations in the lab report, and experiment. Today you’ll learn the verification of theory vs experimental results on a 1 kΩ resistor.

The theoretical results are obtained from the formula of Ohm’s law: V = IR. The experimental verification is provided for a metal film 1 kΩ (±0.05%). We have used a high-quality resistor with negligible tolerance value so as to reduce the tolerance error.

The little problem in our calculations arises due to improper handling of multimeter probes. You can learn the complete method to perform the Ohm’s experiment here and can calculate the current values by using the Ohm’s law calculator.

Air resistance is type of contact force as the air should be in contact with the surface of moving

object to ocure air resistance.

The force that is a contact force as listed from the option is air resistance (Option A)

A contact force is a force that results from the direct contact between the objects involved. Some examples of contact force includes:

Non contact force on the other hand requires no contact with the objects involved. These forces includes:

With the above information, we can conclude that the contact force in the options given is air resistance (Option A)

Learn more about contact and non contact force:

https://brainly.com/question/18451249

#SPJ6

Answer:

180 m

Explanation:

The rock follows a free-fall motion - so the vertical distance covered can be found by using the equation

[tex]h=\frac{1}{2}gt^2[/tex]

where

g = 10 m/s^2 is the acceleration due to gravity

t = 6.00 s is the time of the fall

Substituting these data, we find the height of the cliff:

[tex]h=\frac{1}{2}(10 m/s^2)(6.00 s)^2=180 m[/tex]

The height of the cliff from which the rock is dropped can be calculated using the formula h = 0.5*g*t². This gives us a calculated height of 180 meters.

The problem you're dealing with is related to one of the basic physics equations of motion, specifically for an object under constant acceleration - in this case, the acceleration due to gravity. To find the height of the cliff, we can use the formula h = 0.5*g*t², where 'h' is the height, 'g' is the acceleration due to gravity (10.0 m/s² as provided), and 't' is the time it takes for the rock to hit the ground (6.0 seconds in this problem).

Plugging in the known values into the equation gives us h= 0.5*10.0*(6.0)² = 180.0 meters. This means the cliff is approximately 180 meters high.

https://brainly.com/question/28554700

#SPJ3

Answer:

Explanation:

There are several differences between a physical and chemical change in matter or substances. A physical change in a substance doesn't change what the substance is. In a chemical change where there is a chemical reaction, a new substance is formed and energy is either given off or absorbed.

Answer:

Explanation:

ur right i think

Ur right gimme brainlyest

Answer:

344.8 Hz

Explanation:

The frequency of a wave is given by:

[tex]f=\frac{v}{\lambda}[/tex]

where

v is the speed of the wave

[tex]\lambda[/tex] is its wavelength

Here we have

v = 793 m/s

[tex]\lambda=2.3 m[/tex]

Substituting into the equation, we find

[tex]f=\frac{793 m/s}{2.3 m}=344.8 Hz[/tex]

This is true. The break handles and brakes are levers and the seat adjustment (raise or lower) is a screw.

Answer:

True.

Explanation:

A bicycle is a compound machine.

Answer:

The velocity

Explanation:

Kinetic energy of an object is directly proportional to the square of its velocity if mass if kept constant. Therefore, if the velocity is doubled the kinetic energy increases four times.

K.E= 1/2mv²

m is the mass of the object and v the velocity. This means that there must be motion for there to be kinetic energy.

Answer:

Explanation:

The question implies that the dimmer here is based on a resistor. For the dimmer to work properly, it needs to be connected to the lights in series. The total resistance of the series circuit is the sum of the resistance of

Reducing the resistance of the dimmer resistor will reduce the total resistance  of the circuit. The question states that voltage across the series circuit is "constant." There will not be a change in the voltage across the circuit. The voltage across the lights will increase but will not exceed the voltage of the power supply. The RMS voltage of power supply in the US is 120 volts. The voltage across the light will become closer to 120 volts. However, only reducing the resistance of the switch will not cause the voltage to exceed 120 volts.

[tex]\displaystyle \rm Current = \frac{Voltage}{Resistance}[/tex].

Resistance drops while voltage across the entire circuit stays the same. As a result, the current through the circuit will increase.

Current is the same for all appliances connected in series. The current in the lights will increase. Assume that the resistances of the lights stay the same,

[tex]\displaystyle \rm Power = Current^{2} \times Resistance[/tex].

Power dissipated in the lights will increase. More energy will be consumed to produce light in unit time. As a result, the lights will brighten.

Answer:

10

Explanation:

I = 2A.

The easiest way to solve this problem is using Ohm's Law equation I = V/R.

The battery in the circuit is V = 24V and the resistance R = 12Ω,  to calculate the current we use the equation above:

I = 24V/12Ω = 2A

Using Ohm's law, which states that current equals voltage divided by resistance, the current in a circuit with a 24-volt battery and a 12-ohm resistance is found to be 2 amperes.

To calculate the current in a circuit with a given voltage and resistance, we can apply Ohm's law, which states that current (I) equals voltage (V) divided by resistance (R). In this case, we are given a 24-volt battery and a resistance of 12 ohms.To calculate the current in a circuit with a given voltage and resistance, we can apply Ohm's law, which states that current (I) equals voltage (V) divided by resistance (R). In this case, we are given a 24-volt battery and a resistance of 12 ohms. Using Ohm's law:

I = V / R

I = 24 V / 12 Ω

I = 2 A

Therefore, the current flowing through the circuit is 2 amperes (A).

https://brainly.com/question/36009177

#SPJ2

The motion of an object thrown at an angle is projectile motion

Projectile(missile designed to be fired from rocket)

Answer:

392 J

Explanation:

Gravitational potential energy is:

PE = mgh

where m is mass, g is acceleration of gravity, and h is the height.

PE = (5 kg) (9.8 m/s²) (8 m)

PE = 392 J

Answer:

D

Explanation:

Remember that magnets only attract at different poles. If both poles are the same, they repel

When two magnets are placed side by side they can either attract or repel each other depending on the arrangement of their poles. Option B correctly shows the magnets attracting each other.

When two magnets are placed side by side they can either attract or repel each other depending on the arrangement of their poles. In option B, the magnets are oriented in a way that the south pole of one magnet is facing the north pole of the other magnet. This is the correct representation of what happens when two magnets are placed side by side because opposite poles attract, resulting in the magnets sticking together.

https://brainly.com/question/13026686

#SPJ2

Answer:

D. If it has coarse grains, then it cooled slowly beneath the surface of the Earth. If it has fine grains, then it cooled rapidly on the Earth's surface.

Explanation:

The easiest way for a geologist to identify where the igneous rocks have formed is to look at their grains. There's two types of igneous rocks, intrusive and extrusive. The intrusive igneous rocks have formed from the magma that has cooled off slowly deeper into the crust, thus their crystals had more time to grown, and they have coarse grains. The extrusive igneous rocks have formed from the lava that has cooled off quickly on the surface, thus their crystals had very little time to grow, so they have fine grains.

The correct option is D. If it has coarse grains, then it cooled slowly beneath the surface of the earth. If it has fine grains, then it cooled rapidly on the earth's surface.

To understand why option D is correct, let's consider the processes of igneous rock formation and the factors that influence grain size:

 1. Intrusive (plutonic) rocks are formed from magma that cools and solidifies within the Earth's crust. This slow cooling process allows for the formation of large crystals, resulting in coarse-grained rocks. Since the cooling is slow, the mineral ions have more time to move and form larger crystals. Examples of intrusive rocks include granite and gabbro.

2. Extrusive (volcanic) rocks are formed from lava that cools and solidifies on the Earth's surface. This rapid cooling process does not allow much time for crystal growth, resulting in fine-grained or aphanitic rocks. The rapid cooling rate traps the mineral ions before they can organize into larger crystals, leading to a rock with small, barely visible crystals. Examples of extrusive rocks include basalt and rhyolite.

Therefore, the identification of the environment in which an igneous rock was formed is based on the texture of the rock, which is indicative of the cooling rate:

 - Coarse grains (phaneritic texture): The rock cooled slowly, which typically occurs beneath the Earth's surface where the surrounding rock acts as an insulator, slowing down the cooling process. This is characteristic of intrusive rocks.

 - Fine grains (aphanitic texture): The rock cooled rapidly, which typically occurs on the Earth's surface where the lava is exposed to the atmosphere or water, leading to quick heat loss. This is characteristic of extrusive rocks.

Based on this understanding, the correct identification is:

- If an igneous rock has coarse grains, it cooled slowly beneath the surface of the earth (intrusive).

- If an igneous rock has fine grains, it cooled rapidly on the earth's surface (extrusive).

 Hence, option D is the correct answer.

Answer:In the similar way, a changing magnetic field produces an electric current in a wire or conductor. The relationship between electricity and magnetism is called electromagnetism.

Explanation:

Final answer:

Electricity and magnetism are closely related, where changing electric currents produce magnetic fields and changing magnetic fields induce electric currents. This principle, known as electromagnetism, is fundamental to many technologies and reflects an underlying symmetry in nature.

Explanation:

The interconnection between electricity and magnetism is a cornerstone of the field of electromagnetism. These two phenomena are so intertwined that a change in electric current can produce a magnetic field, and conversely, a change in a magnetic field can induce electric current. This concept is crucial to many technological advances such as generators, transformers, and various electronic devices that are essential to modern life.

For instance, when an electric current flows through a wire, it creates a surrounding magnetic field. If this magnetic field varies, it can induce a current in another nearby circuit, a principle known as magnetic induction. This is the fundamental process behind the operation of electrical generators and transformers. Historical experiments, including those by scientists such as Michael Faraday and Joseph Henry, have shown that electricity can produce magnetism and vice versa.

Answer:

An electric motor converts electrical energy into mechanical energy. The process is as follows:

D. When current flows through the motor, it powers electromagnets that are attracted and repelled by the poles of permanent magnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the mechanical energy available.

voltage = current * resistance

so

current = voltage/resistance

therefore,

current = 6/3 A = 2 A

Answer:

tratamento de lei ohm

Explanation:

Answer:

10 m/s²

Explanation:

Newton's second law:

∑F = ma

10 N = (1 kg) a

a = 10 m/s²

The change in the kinetic energy of the runner will be 1350 J. It is found by subtracting the kinetic energy during two different velocity.

The energy of the body by the virtue of its motion is known as the kinetic energy of the body. It is defined as the product of half of mass and square of the velocity.

According to the law of conservation of energy, the total energy is defined as the sum of kinetic energy and potential energy.

The change in the kinetic energy is found as;

[tex]\rm KE = \frac{1}{2} m(v^2-u^2)\\\\ KE = \frac{1}{2} \times 60 (9^2-6^2) \\\\ KE=1350 \ J[/tex]

Hence, the change in the kinetic energy of the runner will be 1350 J.

To learn more about kinetic energy, refer to the link;

brainly.com/question/999862

#SPJ2

Answer:

Gravity

Explanation:

For a space station in orbit, the centripetal force is the force of gravity.

For a child in a swing, the centripetal force is the normal force.

For a ball on a string, the centripetal force is the tension.

Answer:

Gravity

Explanation:

Gravity is one of four fundamental forces in nature. The other fundamental quantities are the electromagnetic interaction force, the weak force and the strong force. Simply put, gravity is the magnitude responsible for defining the weight of a body, being the centripetal force of orbiting objects (such as a space station, for example) and being the vertical and downward force that holds us together with the planet. Any object that moves in free fall is under the influence of gravity acceleration, which on Earth equals approximately 9.8 m / s2.

Mixing a base with an acid results in a chemical reaction called neutralization. The result is a perfectly balanced solution of salt and water with a pH of 7 if the acid and base are balanced properly. Depending on the bases and acids used, it can be a dangerous experiment.

Neutralization reaction happens when a base is mixed with an acid. Acid neutralize the base to form the salt and water.

Acid is a chemical substance that, when dissolved in water, produces a solution with higher H+ ion activity than pure water.

A base is an aqueous material that receives protons, contributes electrons, or releases hydroxide (OH-) ions. A proton donor is an acid. A base, on the other hand, is a proton acceptor.

Acid neutralize the base to form the salt and water.

Hence, neutralization reaction happens when a base is mixed with an acid.

To learn more about the acid and base, refer to the link;

https://brainly.com/question/23687757

#SPJ2

When there is direct relationship the car moves with respect to time.

The direct relationship in the graph shows that the position of the car positively changes as time elapses because there is a direct relationship between position and time.

Direct relationship means when one factor increases the other also increases whereas one decreases the other also decreases so we can conclude that when there is direct relationship the car moves with respect to time.

Learn more about relationship here: https://brainly.com/question/26152883

Learn more: https://brainly.com/question/12680874

Answer: Increases

This direct relationship graph shows that the position of the car

increases as time elapses.

Explanation:  got 100 percent on edge

A fly and an eagle could have the same kinetic energy if the fly compensates its smaller mass by flying at a much higher velocity, whereas the eagle, which has a larger mass, would fly at a slower speed to achieve the same kinetic energy. This is a direct result of the kinetic energy formula and the principle of conservation of energy.

The scenario where a fly and an eagle have the same kinetic energy is actually possible. Kinetic energy, which is the energy an object possesses due to its motion, can be calculated using the formula ½mv², where 'm' is the mass of the object and 'v' is its velocity. For the fly and the eagle to have the same kinetic energy, the fly, which has a much smaller mass compared to the eagle, must compensate by having a much higher velocity. Conversely, the eagle with a larger mass can have the same kinetic energy by flying at a lower velocity.

For example, if we consider the kinetic energy formula, a very light fly (let's say 0.002 kg) moving at a high speed (say 20 m/s) would have a kinetic energy of 0.4 Joules. In comparison, a massive eagle (for instance, 4 kg) would only need to fly at around 0.14 m/s to have the same kinetic energy of 0.4 Joules. This illustrates how mass and velocity can vary inversely for different objects to have equivalent kinetic energies.

While it might seem counterintuitive, this is a direct consequence of conservation of energy and the kinetic energy relationship. The concept that energy cannot be created or destroyed, but only transferred or transformed, means that two vastly different animals could have the same kinetic energy if their masses and velocities are complementary.

Answer:

the answer I think is A im so sorry if its wrong

Explanation:

Because yes we do have gases collapsing we also have dust collapsing with it and surrounding it to make a disk type of air flow that pushes it that makes it rotate if that makes sense. yet again super sorry if its wrong.

Answer:

the answer is actually B

Explanation:

When our solar system formed out of a gas cloud, called a nebula, there was lots of dust and gas coming together due to the force of gravity. The dust and gas was already moving around in a circle. As it all clumped together to form the Sun and planets, these new objects started to spin – and then spin faster.

i hope this helps!!!

The magnitude of the net force on the car and trailer system is 5000 N.

The magnitude of the net force on the car and trailer system can be calculated by subtracting the frictional force from the force exerted by the car's engine. In this case, the engine exerts a force of 6000 N and the frictional force is 1000 N. Therefore, the net force is 6000 N - 1000 N = 5000 N. So, the correct answer is c. 5000 N.

https://brainly.com/question/2902811

#SPJ2

Answer:

to absorb extra light- E.

Answer:

E.

Explanation:

Curved mirrors absorb more light that the flat ones, this means that the image you're gonna get it has more information, you can see more.

That's why curved mirror are also used to vigilance in stores for example. Because allows you to see a more panoramic view due to the extra light reflection.

Answer:

D

Explanation:

Orange juice at least is acidic and therefore not basic.

Toothpaste,bleach and shampoo are base. While orange has the acidic nature. Orange is not the base.

Acid is a chemical substance that, when dissolved in water, produces a solution with higher H+ ion activity than pure water.

A base is an aqueous material that receives protons, contributes electrons, or releases hydroxide (OH-) ions. A proton donor is an acid. A base, on the other hand, is a proton acceptor.

The important base and their uses;

1.sodium hydroxide, ------- Used in the manufacture of soaps

2.potassium hydroxide --------Used in the production of liquid soaps and soft soaps. Used in alkaline batteries.

Toothpaste,bleach and orange are base. While orange has the acidic nature. Orange is not the base.

Hence, option D is correct.

To learn more about the acid and base, refer to the link;

https://brainly.com/question/23687757

#SPJ2

Answer:

Distance, Brighter

Explanation:

Think of a flash light, one close and one far which is brighter and which is dimmer.  

Hope this is what your teacher put as the answer!

Answer:

Distance, brighter  

Explanation:

Brightness depends upon the amount of power that is radiated by a star

This in turn follows the inverse square law. That is, as the distance from the object increases, brightness decreases as the square of the distance.

Color depends on the composition of the star's radiation.

When the stars are bright, it can be understood that they are closer, compared to other stars.