is there carbon atoms in the compound Ca3N2​

The correct answer is option C. The hydrogen bonding between the water molecules is much stronger than the dipole induced dipole forces between the water and nonpolar oil molecules.

Option C is correct because water’s hydrogen bonding is much stronger than the dipole induced dipole interactions between water and nonpolar oil molecules.

Why other options are incorrect:

The complete question is:

Which of the following best explains why oil and water don't mix?

a) Oil molecules can't dissociate into ions on dissolution into water.

b) The dispersion forces between the oil molecules are much stronger than the dipole induced dipole forces between the water and nonpolar oil molecules.

c) The hydrogen bonding between the water molecules is much stronger than the dipole induced dipole forces between the water and nonpolar oil molecules.

d) Water is too dense to allow the oil to dissolve in it  of the water is too oil is.

Answer:2500kg

Explanation:

Weight of car(w)=25000N

Acceleration due to gravity approximately(g) 10m/s^2

Mass=w/g

Mass=25000/10

Mass=2500kg

Answer: The force of a magnetic field on a particle with spin causes the particle to rotate it's spin to align with the magnetic field. ... Taking these two ideas together, then, the Earth's magnetic field will cause the magnet to align north to south. That's why people named them the north and south poles.

Explanation: Hope i could help please mark as brainliest!

The acceleration of the car is 3.3 m/s²

Explanation:

Given-

Speed of the car, (we can  represent as s) = 60 km/hr = 60 × [tex]\frac{5}{18}[/tex] = 16.67 m/s

Time,(we can  represent as  t) = 5 s

Acceleration, (we can represent as a) = ?

We know,

a = [tex]\frac{s}{t}[/tex]

a = [tex]\frac{16.67}{5}[/tex]

a = 3.334 m/s²

The acceleration of the car  is 3.3 m/s²

Answer:

Desiree should collect data, which may support or refute her hypothesis.

Explanation:

The next step Desiree must take is to collect data which might likely support or refute her hypothesis.

This is usually done by carrying out experiments or field studies.

Desiree should proceed to the step of collecting data, which may support or refute her hypothesis. Therefore option B is correct.

Collecting data is a crucial stage in the scientific inquiry process. It involves conducting experiments or observations to gather information that can either confirm or contradict the hypothesis she has formulated.

By systematically collecting and analyzing data, Desiree can draw conclusions based on empirical evidence. This step forms the backbone of scientific investigation as it provides the tangible information required to validate or revise her hypothesis.

Once she has sufficient data, Desiree can move on to analyzing her results and drawing meaningful conclusions, paving the way for the interpretation and potential communication of her findings.

Therefore option B is correct.

Know more about Desiree:

https://brainly.com/question/22086651

#SPJ3

Final answer:

The change in momentum of the hockey puck is 1 kg·m/s.

Explanation:

The change in momentum of an object can be calculated using the equation: change in momentum = force x time.

In this case, the force applied to the hockey puck is 10 N and the time period over which the force is applied is 0.1 s. Therefore, the change in momentum of the hockey puck is 10 N x 0.1 s = 1 kg·m/s.

Answer:

I = 4.28 [amp]

Explanation:

To solve this type of problems we must have knowledge of the law of ohm, which tells us that the voltage is equal to the product of resistance by current.

Initial data:

v = 1.5 [volt]

R = 0.35 [ohms]

v = I * R

therefore:

I = 1.5 / 0.35

I = 4.28 [amp]

Final answer:

Using Ohm's Law, the current in the circuit with a voltage of 1.5 volts and a resistance of 0.35 ohms is calculated to be approximately 4.286 amperes.

Explanation:

To determine the current in the circuit, we can use Ohm's Law, which is stated as I = V/R, where I is the current in amperes, V is the voltage in volts, and R is the resistance in ohms. Given that the voltage (V) is 1.5 volts and the resistance (R) is 0.35 ohms, we can substitute these values into the equation to calculate the current.

Thus, the current (I) can be calculated as follows:

I = 1.5V / 0.35Ω = 4.286 amperes (approx).

This means that the current flowing through the circuit is approximately 4.286 amperes.

Answer:

[tex]1.67\cdot 10^{-5} T[/tex]

Explanation:

The magnitude of the magnetic field produced by a current-carrying wire is given by the equation:

[tex]B=\frac{\mu_0 I}{2\pi r}[/tex]

where:

[tex]\mu_0=4\pi \cdot 10^{-7} H/m[/tex] is the vaacuum permeability

I is the current in the wire

r is the distance from the wire

The direction of the magnetic field lines is tangential to concentric circles around the wire.

In this problem, we have:

[tex]I=37.9 A[/tex] is the current in the wire

[tex]r=45.5 cm = 0.455 m[/tex] is the distance  from the wire

Solving for B, we find the magnitude of the magnetic field:

[tex]B=\frac{\mu_0 I}{2\pi r}=\frac{(4\pi \cdot 10^{-7})(37.9)}{2\pi (0.455)}=1.67\cdot 10^{-5} T[/tex]

Answer:

a) [tex]1209.6 kg m^2/s[/tex]

b) [tex]302.4 kg m^2/s[/tex]

Explanation:

a)

The angular momentum of an object in circular motion is given by the formula

[tex]L=m\omega r^2[/tex]

where

m is its mass

[tex]\omega[/tex] is its angular velocity

r is the distance of the object from the axis of rotation

For the child in this problem, we have:

m = 60 kg is his mass

r = 4 m is the radius of the merry-go-around

Here the child completes 1 revolution every 5 seconds; so his frequency is

[tex]f=\frac{1}{5}=0.2 Hz[/tex]

And so his angular speed is

[tex]\omega=2\pi f=2\pi 0.2=1.26rad/s[/tex]

Therefore, the angular momentum is

[tex]L=(60)(1.26)(4)^2=1209.6 kg m^2/s[/tex]

b)

For a child sitting halfway of the merry-go-around, his distance from the axis of rotation is

[tex]r=\frac{4 m}{2}=2 m[/tex]

The mass of the child is the same as before,

m = 60 kg

And the angular speed is the  same as well: in fact, the merry go around is a rigid body, so all its points cover the same angle in the  same time; so, they all have the same angular speed. Therefore,

[tex]\omega=1.26 rad/s[/tex]

Therefore, the angular momentum here is:

[tex]L=m\omega r^2 = (60)(1.26)(2)^2=302.4 kg m^2/s[/tex]

Answer:

Solids

Explanation:

Aluminum

Explanation:

Answer:

I would strongly recommend Exploring Quantum Physics through Hands-on Projects for physics practicals.

Explanation:

The best book for physics practicals, particularly for university-level students, is often considered to be 'Principles and Practice of Physics' by Eric Mazur due to its clear examples and structured sequence. OpenStax's 'University Physics I' is an excellent alternative with open-source availability. A balance of textbooks, resources, and instructor guidance can provide a robust physics learning experience.

When searching for the best book for physics practicals, the University Physics I by Eric Mazur, entitled Principles and Practice of Physics, comes highly recommended. This book is known for its clear explanations, terminology consistency with other resources, and its sequence of content presentation. It is packed with worked-out examples and offers self-quiz conceptual questions that are crucial for understanding practical aspects of physics.

Alternatively, students looking for online and open-source textbooks can turn to resources like University Physics I at OpenStax, which offers an abundance of exercises and a more traditional presentation style. For computational physics enthusiasts, texts like A Practical Introduction to Computational Physics and Scientific Computing could be explored.

Ultimately, these books along with different ways to digest physics concepts, such as discussions with instructors and accessing resources in the Physics library, can cater to the diverse needs of physics students. It's important to consider one's own learning style and curriculum requirements when choosing the right practical physics text.

Answer: 945 joules

Explanation:

Given that:

mass of volleyball = 2.1kg.

Speed at moving volleyball = 30m/s. Energy possessed by volleyball = ?

Recall that the energy possessed by a moving object is known as kinetic energy. Thus, the moving volleyball has kinetic energy.

So, apply the formula for kinetic energy

K.E = 1/2 x mass x speed^2

K.E = 1/2 x 2.1kg x (30m/s)^2

K.E = 0.5 x 2.1kg x 900

K.E = 945 Joules

Thus, the volleyball has kinetic energy of the 945 joules

A heavy object falls with the acceleration as a light object during free fall because of acceleration due to gravity.

Explanation:

A motion can be termed as free fall when the object is completely under the influence of gravity. So in this case, no other force will be acting on the object other than the gravitational force. As the gravity influences the object in free fall, the acceleration attained by any object in free fall is same. And this acceleration is termed as acceleration due to gravity. Since, the gravity gives the acceleration to every object experiencing free fall, then the acceleration should be constant. Thus, a heavy object and a light object will have same acceleration during free fall.

Answer:

Your center of gravity

Explanation:

like everyone has there own center of gravity by there weight because that is going to see hows your balance, if I'm right

The center of gravity is the point where the total weight of a body is concentrated, but it may not always be on the body itself. This can be observed in situations like an unbalanced car wheel or a human standing, where the center of mass does not align with the geometric center.

The center of gravity of a body is the point where the total weight of the body is assumed to be concentrated. However, it does not necessarily need to be located on the body itself. This concept is particularly important in understanding the balance and stability of objects. For instance, a car wheel that has not been balanced properly has a center of mass that does not coincide with its geometrical center. Moreover, in a situation like a human standing, by shifting their weight, they can cause the center of mass to hang in space - a point that might not correspond with any actual material part of the body.

Three-dimensional bodies demonstrate this when they are in motion, such as when a stick is thrown in the air and seems to rotate around a single point. This occurs because the center of mass carries the whole mass of the body, contributing to the observed motion. Even large structures, such as buildings or cruise ships, despite their size, are located in a uniform gravitational field on Earth, which means the acceleration due to gravity is constant and the center of gravity and center of mass coincide.

Objects with odd shapes or missing parts can also have a center of gravity outside their physical form. Imagine a horseshoe where the center of gravity would be somewhere near the bottom, even though there's no material there.

Consider a hollow ring, the mass is concentrated around the rim, not in the center. As a result, the center of gravity would lie somewhere within the ring, not necessarily on the actual body.

Answer:

The object will travel at a constant rate in along a straight line.

Explanation:

In the given situation, it is mentioned that there is no external force acting on the given object. Thus, it will retain its initial velocity along a straight path.

An object given an initial velocity and no other forces acting on it will move at a constant rate in a straight line.

The object will move at a constant rate in a straight line.

If an object is given an initial velocity and no other forces act on it, it will continue to move at a constant speed in a straight line. This concept is a fundamental principle in physics known as Newton's first law of motion or the law of inertia. According to this law, an object in motion continues in motion with the same speed and in the same direction unless acted upon by an unbalanced force. In reality, there are usually forces like gravity and friction that can affect an object's movement, but, in theory (or in a vacuum), without those forces, an object's motion would remain unchanged.

https://brainly.com/question/35591666

#SPJ2

Answer:The answer is tennis ball

Explanation:

i know this cause I'm good at math and why wouldn't you trust a random guy off the internet.

Answer:

Explanation:

Field lines are lines of forces around a bar magnet. The show the direction of force field in a magnet.

Usually, around a bar magnet, the field lines originates and spreads out from the north pole.

Then they converge and enter through the south pole.

Therefore, we can make our choice by inspecting the given diagram. If the lines enters through the pole, it is the south pole.

Where they originate or leave is the north pole.

In a magnet, the lines (forces) always enter through the south pole and leave through the north pole.

I hope that helps ya'll.

- sincerelynini

Answer:

land scaping

Explanation:it makes your yard look lit imfao

Answer:

class #3

Explanation:

The soils are deep, well-drained, easily worked, hold water well and are either fairly well supplied with plant nutrients or highly responsive to the application of fertilizers.

Answer:

    Actinide series     : All the elements in the actinides series are radiactive

Explanation:

The question is to fill in the blank which series of elements in the periodic table are radiactive.

The answer is the actnide series.

The actinide series is the elements in the same row as actinide since the same actnide (atomic number 89)  to the lawrencium (atomic number 103).

Among other elements, this series include thorium, uranium and plutonium which are very known as radiactive elements, since they are used in nuclear reactors, which use  nuclear fission reactions.

The reason for the radioactivity of these elements is the massive unstable nucleus.

A heavy nucleus means a large amount of positive charge (protons)  concentrated in a tiny region (the nucleus of the atom).

The electrostatic repulsion among those so many protons is not balanced by the strong nuclear force (from the neutrons) resulting in the unstability (radioactivity) of the nucleus.

In a radioactive decay series, not all elements are radioactive. The series includes most of the naturally radioactive elements, but each series concludes with a stable, non-radioactive end-product, typically a stable isotope of lead.

The question you've asked relates to Radioactive Decay Series. Naturally occurring radioactive isotopes of the heaviest elements fall into decay series. These series include most of the naturally radioactive elements of the periodic table such as the uranium series, the actinide series, and the thorium series. However, not all elements in these series are radioactive; each chain ultimately concludes with a stable end-product. For example, for all three mentioned series, the end-product is a stable isotope of lead. The concept of a decay series results from heavy nuclei decaying to a lighter one, with the lighter, daughter nucleus becoming the parent nucleus for the next decay.

https://brainly.com/question/34726525

#SPJ6

Answer:

34.62m/s^2

Explanation:

Force = mass x acceleration

Given

Force = 1800N

Mass = 52kg

Therefore

1800 = 52 x a

Divide both sides by 52

1800/52 = 52/52 x a

34.62 = a

a = 34.62m/s^2

The refractive index of the liquid is 1.52. The substance is a crown glass.

Explanation:

Given:

Velocity of light through the substance, v = 1.97 X 10⁸ m/s

Refractive index of the liquid, μ = ?

We know,

μ = [tex]\frac{c}{v}[/tex]

where, c = velocity of light in air

            v = velocity of light in the substance

speed of light in air is 3 X 10⁸m/s

[tex]= \frac{3 X 10^8}{1.97 X 10^8} \\\\= 1.52\\[/tex]

Therefore, refractive index of the liquid is 1.52. The substance is a crown glass.

n = 1.52

Index of the liquid = 1.52

The type of the liquid is Crown glass.

Explanation:

In finding the index of refraction, we use this formula

n = c/v

where n is the index of refraction

c is velocity of light in vacuum which is constant and is equivalent to [tex]3 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

v is the velocity of light in a particular medium

Here we use [tex]1.97 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

Using the formula,

n = c/v

n = [tex]3 \times 10^{8} / 1.97 \times 10^{8}[/tex]

n = 1.52284264

n = 1.52

Thus, the index of the liquid is 1.52

Answer:

c I hope this helpssssss :)

The acceleration of the block is 4 m/s².

To find the acceleration of the 1kg block in the given diagram, we need to calculate the total force acting on the block and then divide it by the mass of the block.

Since there are three forces acting on the block, we can find the resultant force by adding these forces together.

In this case, the forces are 5N, 4N, and 5N in different directions.

Combining these forces, we get a net force of 4N in the horizontal direction.

Since the mass of the block is 1kg, the acceleration can be calculated using Newton's second law of motion: F = ma.

Therefore, the acceleration of the block is 4 m/s².

Answer:

The correct statements  are:

Explanation:

The answer choices are:

The electric field is the electrostatic force per unit of charge,  

         [tex]\vec E=\dfrac{\vec F}{Q}[/tex]

around around a charge, where another charge would experience the electrostatic force.

The electric field lines are shown in a diagram with arrows ditributed radially away from a positive charge and radially toward a negative charge.

Since the arrows are away from Q, Q is a positive charge: statement D.

Since the size of the arrows decreases as you move away  from Q the stregth of the field is not uniform: statement A.

Since the charge Q is positive, a negative charge would be attracted toward it: statement E.

(a) The magnitude of force that the positive charge exerts on the negative charge is - 2.209 N.

(b) If the negative charge is doubled, then the force will also get doubled.

The new force will be F = -4.418 N.

Explanation:

The force acting between two charged particles separated by a distance is termed as Coloumb's force or electrostatic force. It can be termed as electrostatic force of attraction if the the force acting between the charges are oppositely charged. And it can be termed as electrostatic force of repulsion if the charges are similar or like charges.

In the present case, there is a positive and negative charge, so electrostatic force of attraction will be acting between them. As per Coloumb's law, the electrostatic force of attraction is directly proportional to the product of charges and inversely proportional to the square of distance of separation.

[tex]F = \frac{kQq}{d^{2} }[/tex]

Here, k is the constant of proportionality which is equal to 9 ×[tex]10^{9}[/tex] and Q, q are the two charges, d is the distance of separation.

So here Q = 5.5 ×[tex]10^{-6} C[/tex] and q = - 3.5 ×[tex]10^{-6} C[/tex] and d = 0.28 m

Then, [tex]F=-\frac{9*10^{9}*5.5*10^{-6} * 3.5 * 10^{-6} }{(0.28)^{2} } = 2209.82*10^{-3}[/tex]

So the magnitude of force that the positive charge exerts on the negative charge is - 2.209 N.

(b) If the negative charge is doubled, then the force will also get doubled.

The new force will be F = -4.418 N.

The question requires the calculation of the electric force between two point charges using Coulomb's law and understanding how changes in the magnitude of one charge affect the force.

The question involves understanding and applying Coulomb's law, which describes the electric force between two point charges.

a) Magnitude of the Force

To find the magnitude of the force that one charge exerts on another, we use the formula given by Coulomb's law:

[tex]F = k * |q1 * q2| / r^2[/tex]

Where:

Plugging in the values, we calculate F.

b) Effect of Doubling the Negative Charge

If the negative charge was doubled, the new charge would become [tex]-7.0 x 10^-6 C.[/tex] Since the force is directly proportional to the product of the two charges, doubling one of the charges would double the force as well.

According to the USDA, 40% of our food worth $161 billion is not even harvested, lost in processing, thrown away in restaurants and homes or ended up rotting in America’s landfills. It is also reported that 50% of the produce is never consumed.

Disparities in food distribution and availability imply that numerous communities and neighborhoods have very constrained access to fresh affordable food. Also, a significant number of those with a bounty of food choose to toss it rather than donate it.  

Another type of food waste comes from produce discarded by millions of backyard cultivators due to their gardens producing far more fruits and vegetables than they might use, preserve or give to friends and neighbours.

Answer:

.

Explanation:

Answer:

d. A voltage causes electric charges to move from higher to lower potential.

Explanation:

Answer:

[tex]ME=459,364J[/tex]

Explanation:

Mechanical Energy=Potential Energy+ kinetic Energy

[tex]m=82kg,g=9.8N/kg,h=490m,v=40m/s[/tex]

To calculate Kinetic Energy:-

[tex]KE=\frac{1}[2}mv^2\\=\frac{1}{2}\times82kg \times(40m/s)^2\\=65600J[/tex]

To calculate Potential Energy:-

[tex]PE=mgh\\=82kg \times9.8N/kg \times490\\=393764[/tex]

therefore,

[tex]ME=KE+PE\\=65600+393764\\=459364J[/tex]

The skydiver's total mechanical energy is 459365J

Final answer:

The total mechanical energy of an 82-kg skydiver moving at 40 m/s at an altitude of 490 m above the ground is calculated as 458876 Joules, which includes both kinetic and potential energy.

Explanation:

Calculating Total Mechanical Energy of a Skydiver

To calculate the total mechanical energy of a 82-kg skydiver moving at a speed of 40 m/s at an altitude of 490 m above the ground, we need to consider both kinetic and potential energy.

Kinetic energy (KE) is given by the formula: KE = 0.5 Times m times v2

Gravitational potential energy (PE) is given by the formula: PE = m  times g Times h

Where:

m is the mass of the skydiver (82 kg)

v is the velocity (40 m/s)

g is the acceleration due to gravity (9.8 m/s2)

h is the height above the ground (490 m)

Now we perform the calculations:

KE = 0.5  imes 82 kg times (40 m/s)2 = 0.5 times 82 times 1600 = 65600 J

PE = 82 kg times 9.8 m/s2 times 490 m = 82 times 9.8 times 490 = 393276 J

The total mechanical energy (Etotal) is the sum of kinetic and potential energy:

Etotal = KE + PE = 65600 J + 393276 J = 458876 J

Therefore, the total mechanical energy of the skydiver is 458876 Joules.

Answer:

Maximum magnetic force on current carrying wire when wire is placed at 90 degree with magnetic field

Explanation:

As we know that the magnetic force on current carrying conductor is given as

[tex]\vec F = i(\vec L \times \vec B)[/tex]

here we have

[tex]F = i L Bsin\theta[/tex]

here we know that

[tex]\theta [/tex] = angle between length vector and magnetic field vector

so if we would like to have maximum magnetic force on the current carrying wire then

[tex]\theta = 90 [/tex]

so we have

[tex]F_{mex} = iLB[/tex]

Answer:

40.6 N/m

Explanation:

From Hooke's law we relate the extension of a spring and the applied force by the formula F=kx where F is the applied force, k is spring constant and x is extension of spring.

Making k the subject of the formula then we have

[tex]k=\frac {F}{x}[/tex]

We also know that F=gm where g is acceleration due to gravity which we take as 9.81 m/s2 while m is the mass. Substituting F with gm into the formula we get that

[tex]k=\frac {gm}{x}[/tex]

Substituting m for 5.8 kg and x for 1.4 m we get the spring conatant as

[tex]k=\frac {9.81\times 5.8}{1.4}=40.641428571428\ N/m\approx 40.6\ N/m[/tex]

Therefore, the spring constant is approximately 40.6 N/m