if you were trying to heat 1g water from temperature of 5C to 6 C, how much heat would be required to do so?

Answer: option C. 120°

Explanation:

Answer: the relative molecular mass of the compound

Explanation:

Answer:

Yes

Explanation:

Sulfur in its pure do not have any taste and odor but many foods rich in sulfur can have a distinct odor and taste. The foods contains sulfur in very small amounts but some of the foods which are known for rich in sulfur are onion, garlic, egg, flex seeds, walnuts, meat, red bell pepper, cheese, green vegetables etc.

The foods rich in sulfur helps in fighting skin acne and fights skin infection which makes our skin brighter because of this property of sulfur it is used in skin antiseptic creme and medicines.

The intake of the excess sulfur can cause burning sensation, diarrhea, tonsils and even can cause brain damage if taken in too excess and death of the brain cells. So, the sulfur is good for health and is a remedy for our skin if taken by the natural source of food in a healthy amount.

Answer:

He is right, sulfured food dose taste different

Question: A 14.630 g milk chocolate bar is found to contain 9.315 g of sugar

How many milligrams of sugar does the milk chocolate bar contain

Answer:

"9315 mg" of sugar has the milk chocolate bar

Explanation:

Given that the  14.630 g milk chocolate has  9.315 g of sugar

We have to convert 9.315 grams to milligrams

We know that 1 gram  =  1000 mg

So

9.315 gram =  [tex]9.315 \times 1000[/tex]

9.315 gram =  9315 mg                          

Therefore, the milk chocolate bar has 9315 mg of sugar.

Answer:

:Grassland

Explanation:

Explanation: Grasslands have too little water to support trees as it does not rain very often in more temperate Grasslands

Grasslands are the biome that receives insufficient water for tree growth, making them dominated by grasses instead of trees. Boreal forests, or taigas, are inaccurately described by the statement claiming they are dominated by deciduous trees, as they are in fact dominated by coniferous trees.

The grassland biome is characterized by receiving too little water to support the growth of large trees. In a grassland, the dominant vegetation consists of grasses which are adapted to environments with less precipitation. Unlike deciduous forests, which have moderate rainfall and temperatures to support tree growth, and taigas (boreal forests) and rainforests, which have significant precipitation that fosters dense tree growth, grasslands are more suited for grasses and herbaceous plants.

It's noteworthy that one of the statements about biomes might be false. Specifically, statement c. Boreal forests are dominated by deciduous trees is incorrect because boreal forests, also known as taiga, are actually dominated by coniferous trees, not deciduous trees.

Answer:

I think the answer is D a ray of violet light

Hope it helps!

Answer:

They’re correct it is 10 seconds

Explanation:

Answer: 10 seconds

Explanation:

Explanation:

Mutations on DNA create genetic variation and diversity on which natural selection acts upon. Mutation can be advantageous, disadvantageous or neutral. Those mutations that confer advantage are preserved in the population while those that are DISadvantageous are weeded out. This occurs because advantageous traits that give a particular advantage to individuals in the environment, however slightest, give them an increased chance of survival and passing their genes to subsequent generations.

An example is mutation that causes sickle cell-shaped blood cells. Individuals with sickle cell blood are less likely to contract malaria. Therefore in an environment where malaria is endemic, the population will have a higher allele frequency for sickle cell alleles that populations in non-endemic areas.

Learn More:

For more on mutations check out;

https://brainly.com/question/11938701

https://brainly.com/question/13612138

#LearnWithBrainly

The electron configuration for Boron (B) is given as [tex]1s^2 2s^2 2p^1[/tex] or [tex][He] 2s^2 2p^1[/tex]

Answer:

Boron (B) has an atomic number equal to 5 and is an element from Group 13 of the periodic table. It has a total of 5 electrons of which 3 are valence electrons.

The electron configuration for Boron can be written with the first two electrons in the 1s orbital. Since 1s orbital can hold only two electrons, out of the remaining three electrons; two electrons will go in the 2s orbital. The remaining one electron in the 2p orbital. Therefore the Boron electron configuration will be [tex]1s^2 2s^2 2p^1[/tex]

Since [tex]1s^2[/tex] is the electron configuration for Helium, Electron configuration for Boron can also be written as [tex][He] 2s^2 2p^1[/tex]

(Refer attached figure)

Standard Molar Volume is the volume occupied by one mole of any gas at STP. Remember that "STP" is Standard Temperature and Pressure. Standard temperature is 0 &176:C or 273 K. Standard pressure is 1 atmosphere or 760 mm Hg (also called "torr"). 1 mole of any gas at STP occupies 22.4 liters of volume.

Answer: 4.5 L

Explanation: Ideal gas at STP standard temperature and pressure: at STP

P = 1 atm

T = 1 °C convert to K (273 K)

Solution:

PV= nRT

Derive the equation to find V

V= nRT / P

Substitute the values

V= 0.2 moles x 0.082 L.atm/ mol. K x 273 K / 1 atm

Cancel out the units of moles, atm and K so the remaining uni is in L.

Answer:

its b

Explanation:

Answer:

                   Radon is the heaviest Noble Gas

Explanation:

                    This statement is very easy to be solved. As we know that Noble Gases are group of Elements which have complete valence shell and are stable elements and don't react easily and hence, are found in mono-atomic form in nature. These elements can be found on the extreme right of the periodic table in group 8 or group 18. Following are the Noble elements,

                             (i) Helium

                             (ii) Neon

                             (iii) Argon

                             (iv) Xenon

                             (v) Radon

Now,

In statement we are provided with only two noble gases i.e. Helium and Radon. Therefore, it is easy among them to finalize the heaviest one as Radon having atomic mass of 222.02 g/mol and atomic radii of 0.22 nm is much denser/heavier than Helium having atomic mass of 4.0 g/mol and atomic radii of 0.122 nm.

Answer:

Mass of CO₂ = 135.96 g

Mass of  TiCl₄ = 586.11 g

Mass of chlorine = 438.78 g

Explanation:

Given data:

Moles of TiO₂ = 3.09 mol

Mass of Chlorine = ?

Mass of all product from 3.09 mol of TiO₂ = ?

Solution:

Chemical equation:

TiO₂ +C + 2Cl₂  →  TiCl₄ + CO₂

Now we will compare the moles of chlorine with TiO₂.

                                TiO₂        :       Cl₂

                                   1            ;        2

                                   3.09     :        2×3.09 = 6.18 mol

Mass of chlorine:

Mass = number of moles × molar mass

Mass = 6.18 mol × 71 g/mol

Mass = 438.78 g

Now we will compare the moles of   TiCl₄ and CO₂ with TiO₂

                                  TiO₂           :          CO₂

                                      1              :            1

                                     3.09         :         3.09

                                     TiO₂         :          TiCl₄

                                         1            :              1

                                      3.09        :            3.09

Mass of CO₂:

Mass = number of moles × molar mass

Mass = 3.09 mol× 44 g/mol

Mass = 135.96 g

Mass of  TiCl₄:

Mass = number of moles × molar mass

Mass = 3.09 mol× 189.68 g/mol

Mass = 586.11 g

Element 2 is more reactive than element 1 because element 2 does not have a fully filled valence shell, so it will attract electrons to complete it. Therefore, option (D) is correct.

Valence electrons are those electrons present in the outermost shell of an atom while the electrons occupied the inner shell are known as core electrons. Lewis structures can be useful to evaluate number of valence electrons and predict the nature of bonds.

Valence electrons are arranged in different types of shells and these electrons will decide the interaction between atoms and the formation of chemical bonds.

Only valence electrons present in the outermost shell can take part in the formation of a chemical bond or a molecule and are reason of the reactivity of the element such kind of electrons is called valence electrons.

Given, element 1 have electronic configuration of 2,8 while the electronic configuration of element 2 is given 2, 8, 18, 18, 6. Element 1 contains fully filled valence shell while element 2 has an incomplete valence shell of electrons. Therefore, element 2 will be more reactive to get nearednoblegas configuration.

Learn more about valence electrons, here:

https://brainly.com/question/18612412

#SPJ5

Answers:

a. Moles of oxygen formed: 0.670 mol

b. Moles of water formed: 1.34 mol

c. Mass of water formed: 24.1 g

d. Mass of oxygen formed: 21.4 g

Explanation:

Dihdyrogen dioxide is the chemical name for a compound made of two hydrogen atoms and two oxide atoms, i.e. H₂O₂, which is also known as hydrogen peroxide or oxygenated water.

The decomposition reaction of dihydrogen dioxide into water and oxygen gas is represented by the balanced chemical equation:

[tex]2H_2O_2(l)\rightarrow 2H_2O(l)+O_2(g)[/tex]

The mole ratios derived from that balanced chemical equation are:

a. Moles of oxygen formed

[tex]2\text{ mol }H_2O_2/1\text{ mol }O_2=1.34\text{ mol }H_2O_2/x[/tex]

When you solve for x, you get:

b. Moles of water formed

[tex]2\text{ mol }H_2O_2/2\text{ mol }H_2O=1.34\text{ mol }H_2O_2/x[/tex]

When you solve for x, you get:

c. Mass of water formed

Using the number of moles of water calculated in the part b., you calculate the mass of water formed, in grams, using the molar mass of water:

       ⇒ mass in grams = number of moles × molar mass

       ⇒ mass in grams = 1.34 mol × 18.015 g/mol = 24.1 g

d. Mass of oxygen formed

Using the number of moles of oxygen determined in the part a., you calculate the mass in grams using the molar mass of O₂.

The resonance structures of ozone differ only in the location of electrons in the structure.

The idea of resonance structures are invoked when a single structure does not sufficiently explain the bonding characteristics of a chemical species. The resonance structures show the different possible bonding extremes in the substance.

In the resonance structures of ozone, all the contributing structures only differ in the location of the electrons in the structure.

Learn more: https://brainly.com/question/8155254

Final answer:

The ozone molecule has resonance structures that differ by the location of electrons around the oxygen atoms, with the positions of the atoms remaining unchanged.

Explanation:

The resonance structures for ozone (O3) differ because they have electrons in different locations. Both structures have the same number of atoms and the same total number of electrons, which is 18. However, what changes between the resonance structures of ozone is the arrangement of these electrons around the oxygen atoms. The positions of the oxygen atoms remain unchanged. The use of double-headed arrows is common to illustrate that the two structures are resonance forms of the same molecule, indicating the shifting of electron locations without altering the atomic positions.

Answer:

Option C

Explanation:

The answer to this question will be the third option "It is bendable." Malleable means to be able to change the shape of a object without damaging or breaking it. In this case a malleable solid would be for example drainage pipes. These pipes have curves and different shapes but still remain its product of a metal.

Hope this helps!

Final answer:

A malleable solid can be shaped under compression into thin sheets without breaking, a property typically found in metals, which also possess ductility, the ability to be drawn into wires.

Explanation:

If a solid is malleable, it means that it can be pounded into thin sheets or bent into shape without breaking. This property is commonly associated with metals, which are elements known for their ability to conduct electricity and heat, their shiny appearance, and their variable hardness and melting temperatures. At room temperature, metals are typically solid, with the well-known exception of mercury.

The ductility of a metal refers to its ability to be drawn into thin wires, and malleability refers to being shaped under compression, such as hammering or rolling into sheets. For instance, metals like copper are used in electrical wiring because they are both malleable and ductile; they don't break when being bent into the needed shapes and can be stretched into thin wires that conduct electricity efficiently.

Answer:

If a gas has experienced a small increase in volume but has maintained the same pressure and number of moles, the temperature of the gas will DROP.

Explanation:

According to Boyle’s law of ideal gases, volume and temperature of a gas is inversely related, as long as the pressure is kept constant;

P₁V₁/T₁ = P₂V₂/T₂

Therefore, if the volume of the gas increases, the temperature will definitely decrease due to the inverse relationship. The gas will get cooler.  

Learn More:

For more on Boyle's Law check out;

https://brainly.com/question/13362447

https://brainly.com/question/2568628

https://brainly.com/question/12049334

#LearnWithBrainly

Answer:

Choices:

A. It has increased two times.

B. It has increased slightly.

C. It has decreased slightly.

D. It has stayed the same.

Explanation:

The correct answer is B. Edge2021

i. Mercury

ii. copper

iii. Mercury

iv.Nitrogen becomes a liquid at -200°C. Liquid nitrogen looks like water

Mercury is a liquid at 0°C, Copper is solid at 1000°C, Nitrogen is a gas at 500°C, and Nitrogen is a gas at -200°C.

(i) The element that is a liquid at 0°C is Mercury. It has a melting point of -39°C and a boiling point of 357°C, so it is in liquid state at 0°C.

(ii) The element that is a solid at 1000°C is Copper. It has a melting point of 1085°C, which means it remains in solid state at 1000°C.

(iii) The element that is a gas at 500°C is Nitrogen. It has a boiling point of -196°C, so it has already changed into a gas at 500°C.

(iv) Nitrogen at -200°C is in the gas state. Its boiling point is -196°C, which means it has already changed into a gas at -200°C.

https://brainly.com/question/24712140

#SPJ3

Answer: 4.32g

Explanation:

MM of H2 = 1 x 2 = 2g/mol

2g of H2 contains 6.02x10^23 atoms.

Therefore Xg of H2 will contain 1.3 x 1024 atoms i.e

Xg of H2 = (2 x 1.3 x 1024) / 6.02x10^23 = 4.32g

Answer:

675 joule

Explanation:

mass of the branch=15 kg

gravity=9. 8 m/s^2

height=4. 5 m

now,

potential energy=mass×gravity×height

=15kg ×9. 8 m/s^2 ×4. 5 m

=675 j

Answer: PE = 662 J

Explanation: Potential Energy is the product of mass, gravity and height.

PE = mgh

= 15 kg x 9.8 m/s² x 4.5 m

= 662 J

Answer:

2.26 g

Explanation:

Data given:

mass of Sulfuric acid = 3.24 g

mass of Aluminum hydroxide = 0.945 g

Theoretical  yield of Aluminum sulfate = ?

Solution:

First we look for the balance reaction

Reaction

     3H₂SO₄ +  2Al(OH)₃ ----------> Al₂(SO₄)₃ + 6H₂O

Now we look for the limiting reactant on which the amount of aluminum sulfate depends

So,

       3H₂SO₄ +  2Al(OH)₃ ----------> Al₂(SO₄)₃ + 6H₂O

       3 mol          2 mol

from above reaction it is clear that 3 mole of H₂SO₄ combine with 2 mole of Al(OH)₃

Convert moles to mass

molar mass of Al(OH)₃  =  27 + 3(16 + 1)

molar mass of Al(OH)₃  = 27 + 45

molar mass of Al(OH)₃  =72 g/mol

molar mass of H₂SO₄ = 2(1) + 32 + 4(16)

molar mass of H₂SO₄ = 2 + 32 + 64

molar mass of H₂SO₄ = 98 g/mol

So,

      3H₂SO₄         +      2Al(OH)₃     ---------->   Al₂(SO₄)₃ + 6H₂O

   3 mol (98 g/mol)    2 mol (72 g/mol)

        294 g                      144 g

So its clear from the reaction that  294 g of H₂SO₄ react with 144 g of Al(OH)₃

now if we look at the given amounts the amount Al(OH)₃ is less then the amount of H₂SO₄

So, for Al(OH)₃ if we calculate the needed amount of H₂SO₄

So apply unity formula

            294 g H₂SO₄ ≅ 144 g of Al(OH)₃

             X g H₂SO₄ ≅ 0.945 of Al(OH)₃

Do cross multiplication

            X g H₂SO₄ = 294 g x 0.945 g / 144 g

            X g of H₂SO₄ ≅ 1.93 g

So, 1.93 g of H₂SO₄ will react out of 3.24 grams, the remaining amount of it will be in excess.

So,

Al(OH)₃ will be consumed completely an it will be limiting reactant.

-----------

Now to Calculate for the theoretical yield

First we look for the balance reaction

Reaction

     3H₂SO₄ +  2Al(OH)₃ ----------> Al₂(SO₄)₃ + 6H₂O

Now we look for the mole mole ration of Al(OH)₃ to the amount of aluminum sulfate produced

So,

       3H₂SO₄ +  2Al(OH)₃ ----------> Al₂(SO₄)₃ + 6H₂O

                          2 mol                       1 mole

from above reaction it is clear that 1 mole of Al₂(SO₄)₃ produce by 2 mole of Al(OH)₃

As we know that

2 mole of Al(OH)₃ = 144 g

So,

if 144 g of Al(OH)₃ gives 1 mole Al₂(SO₄)₃  then how many moles of Al₂(SO₄)₃  will be produces by 0.945 g Al(OH)₃

So apply unity formula

            144 g of Al(OH)₃ ≅ 1 mole of Al₂(SO₄)₃

            0.945 g of Al(OH)₃ ≅ X mole of Al₂(SO₄)₃

Do cross multiplication

           X mole of Al₂(SO₄)₃ = 0.945 g  x 1 mole / 144 g

            X mole of Al₂(SO₄)₃ = 0.0066 moles

So,

0.945 g of  Al(OH)₃ produce 0.0066 mole of Al₂(SO₄)₃

Now conver moles of Al₂(SO₄)₃ to mass

Formula used:

       mass in grams = no. of moles x molar mass . . . . . . (1)

molar mass of Al₂(SO₄)₃ =  2(27) + 3(32 +4(16))

molar mass of Al₂(SO₄)₃ = 54 + 3 (32 +64)

molar mass of Al₂(SO₄)₃ = 54 + 3 (96)

molar mass of Al₂(SO₄)₃ = 54 + 288

molar mass of Al₂(SO₄)₃  =342 g/mol

Put values in equation 1

        mass in grams = 0.0066 g x 342 g/mol

        mass in grams = 2.26 g

So the theoretical yield of Aluminum sulfate (Al₂(SO₄)₃ ) is 2.26 g

Answer: option D. 3:1

Explanation:

the answer to this question is C 2:1

Answer:

The pressure of the gas will  "increases by a factor of four."

Explanation:

The absolute zero in other words called as the absolute temperature. Whereas the absolute zero is the least possible temperature. In which nothing will remain cold and no heat can be released or present in the substance. When it is described in the figure it will be, –273.15 degrees Celsius on the Celsius scale. and  0 K on the Kelvin scale. This absolute temperature concept has been raised from the third law of the thermodynamics.

Answer:

Homogeneous mixture

Solution

Liquid-gas

Hope this helps, hope its not late.

Answer:

Homogeneous mixture

Solution

Liquid-gas

Explanation:

Answer:

the answer is A

Explanation:

The chemical formula is C₂H₅OH and the correct answer is C

A Chemical Formula is used to identify the constituent atoms / elements present in the sample and also the proportion in which the elements are mixed.

In the above figure given it can be seen that the colour of the molecules are being used to determine the Type of molecule

It can be easily observed that in the unknown molecule the carbon atom is connected to another carbon atom

The first Carbon atom is connected to 3 Hydrogen atom

and the second Carbon atom is connected to 2 Hydrogen and one Oxygen atom , The oxygen atom is connected to one Hydrogen atom.

So the chemical formula is C₂H₅OH and the correct answer is C

To know more about Chemical Formula

https://brainly.com/question/11995171

#SPJ2

Answer:

C

Explanation:

Cheese is rotten milk

Answer:

The answer is C, Cheddar Cheese

Full gas bottles, when involved in a fire, can experience a dangerous rise in internal pressure leading to potential explosions. Bottled gas is heavier than air and collects on the floor, creating significant fire hazards if it leaks. Proper storage and safety measures including seismic shut-off valves can help mitigate these risks.

Gas bottles, such as those containing propane or butane, are stored at high pressure typically around 200 atmospheres. These bottles have a safety factor where they are designed not to fail until reaching pressures around 400 atmospheres. However, if a fire exposes the gas bottle to high temperatures, the pressure inside the bottle will increase significantly. If the heat from the fire causes the internal pressure to exceed the safety limit of the bottle, it might no longer be able to contain the gas leading to a potential explosion or rupture.

Furthermore, gas bottles such as those containing propane or butane are denser than air. In the event of a leak, the gas would collect near the ground creating a severe fire hazard as it might be ignited by any nearby source of flame or heat. This is why warnings such as those on hairspray cans caution against exposure to heat or open flames, to prevent the dangerous increase in pressure and the risk of explosion or fire.

Additionally, during natural disasters like earthquakes, improperly secured gas tanks might be disturbed, causing leaks that can lead to fires. Installing seismic shut-off valves and flexible connections can mitigate this risk significantly.

The tail of a comet is on the opposite side of the comet from the sun, due to the influence of the sun's radiation pressure and solar wind.

The tail of the comet is on the opposite side of the comet from the sun. This happens because the sun's radiation pressure and solar wind push material away from the comet's nucleus, forming a tail that points away from the sun, regardless of the direction the comet is moving. Therefore, the tail of the comet always lies opposite to the direction of the sun.

https://brainly.com/question/36721282

#SPJ2

Answer:

The electron dot structure of [tex]Cl_2[/tex]

Explanation:

Step 1: First we have to know the number of valence electrons present in a molecule.

Chlorine is an element from group 17 with 7 nos. of valence electrons.

So, the given [tex]Cl_2[/tex] will have 7+7 = 14

Step 2: We, will begin by drawing the skeleton of the molecule.

Step 3: Then, we have to place the bonding pairs of the electrons in the middle atoms so that chemical bonds can be formed.

Step 4: The electrons left will be used as lone pairs for central and terminal atoms in order to achieve an octet and to finish the electron dot structure. The structural formula and electron dot structure has been attached below.