If the concentration of H+ is 1 x 10 ^-3 M, what is the pH? Is the solution acidic, neutral or basic? Be sure to include the formula and show your work for each step in the calculation.

Answer:

D

Explanation:

Petroleum is one of the top ingredients that makes of gas. When it burns it releases exhaust made of carbon dioxide into the atmospere which has a wide range of effects.

More petroleum would be burned, which would cause the amount of carbon dioxide in the atmosphere to increase. Hence, option D is correct.

Petroleum, also known as crude oil, or simply oil, is a naturally occurring yellowish-black liquid mixture of main hydrocarbons.

Petroleum is one of the top ingredients made of gas. When it burns it releases exhaust made of carbon dioxide into the atmosphere which has a wide range of effects.

Hence, option D is correct.

Learn more about petroleum here:

https://brainly.com/question/8647954

#SPJ2

Answer:

= 97.44 Liters at S.T.P

Explanation:

The reaction between Iron (iii) oxide and Carbon monoxide is given by the equation;

Fe2O3(s)+ 3CO(g) → 3CO2(g) + 2Fe(s)

From the reaction when the reactants react, 2 moles of Fe and 3 moles of CO2 are produced.

Therefore; Mole ratio of Iron : Carbon dioxide is 2:3

Thus; Moles of Carbon dioxide = (2.9/2)×3

                                                   = 4.35 moles

But; 1 mole of CO2 at s.t.p occupies 22.4 liters

Therefore;

Mass of CO2 = 22.4 × 4.35 Moles

                     = 97.44 L

The volume of carbon dioxide produced is  97.44 L.

The equation of the reaction is;

Fe2O3 + 3CO --> 2Fe + 3CO2, we can see that the ratio of iron to carbon dioxide produced is 2:3.

From the reaction equation

3 moles of carbon dioxide is produced when 2 moles of iron is produced

x moles of carbon dioxide is produced when 2.9 moles of iron is produced

x = 3 moles ×  2.9 moles/2 moles

x = 4.35 moles

If 1 moles of carbon dioxide occupies 22.4 L

4.35 moles of carbon dioxide occupies 4.35 moles × 22.4 L/ 1 moles = 97.44 L

Learn more: https://brainly.com/question/20339399

NH4NO3 is the molecular formula

The molecular formula for ammonium nitrate is NH4NO3. It is a salt derived from the reaction of ammonia (NH3) and nitric acid (HNO3), resulting in the formation of the ammonium ion (NH4+) and the nitrate ion (NO3-).

The molecular formula for ammonium nitrate is NH4NO3. This compound is a salt of ammonia (NH3) and nitric acid (HNO3). The formula can be deduced from the process by which it is formed: The ammonia molecule's nitrogen atom (N) combines with three hydrogen atoms (H) to form NH3, and the nitric acid molecule's nitrogen (N) combines with one hydrogen (H), one nitrogen (N), and three oxygen (O) atoms to form HNO3.

In a reaction between these two compounds, the hydrogen in the nitric acid becomes attached to the nitrogen in the ammonia, forming the ammonium ion (NH4+), and the remaining NO3 molecule forms the nitrate ion (NO3-). These two ions come together to form ammonium nitrate.

https://brainly.com/question/5148461

#SPJ12

chemical equations: describe chemical reactions

Answer: a

I think this is the answer

Chemical equations describe chemical reactions. The correct option is a.

Chemical equations are a representation of a reaction in its numerical and chemical formula form.

For example ; [tex]\rm CH_4 + 2O_2 = CO_2 + 2O_2[/tex]

Thus, the correct option is a. describe chemical reactions.

Learn more about chemical equation

https://brainly.com/question/11297584

#SPJ2

Answer: option B

Explanation: since nuclear fission involves the decay of larger nuclide into smaller nuclei along with Neutron when it is collide with Neutron.

Example Decay of U-235 into Kr and Ba along with 3 neutrons

Answer:

By presuming n denotes neutron, A is an atom and B & C are lighter nuclei, a reaction model of nuclear fission can be represented as follows:

n + A → B + C + n

Explanation:

A nuclear fission reaction is a process where a neuron collide with an atom and split it into two lighter nuclei and at the same time, a neuron and a large amount of energy will be released. The released neuron will then induce another nuclear fission on the next atom and repeat the same reaction process.

The understanding of nuclear fission play an important role in developing nuclear energy technology.

Answer:

Explanation:

Solutions are homogeneous mixtures.

A solution contains at least one solute component and one solvent component all in the same phase.

The term solubility is used to express the maximum amount of solute that can be dissolved in certain amount of solvent, and is measured at a given temperature and pressure.

You may refer to a solution as concentrated or diluted. These are kind of vague terms, in the sense that they do not express how much solute is dissolved. They just tell if there are many dissolved particles (molecules or ions), which is expressed as concentrated, or just a few particle, which is express as diluted.

Other more specific terms used to refer the amount of solute dissolved in a solution are: unsaturated solution, saturated solution, and supersaturated solution.

Unsaturated solution: the solution contains less solute than what it can have. The solution may dissolve more solute.

Saturated solution: the solution has the maximum amount of solute that it can dissolve, at certain temperature and pressure. If you add more solute to a saturated solution, it will not get dissolved (unless you change the temperature or pressure).

Supersaturated solution: a special condition where the solution contains more solute than the saturated solution, at the same temperature and pressure. This is a very unstable situation and any perturbation will make that the excess solute precipitate.

Final answer:

A solution with many dissolved molecules in a fixed amount of solvent is called a concentrated solution, characterized by its large solute-to-solvent ratio and uniform composition.

Explanation:

A solution that contains many dissolved molecules in a fixed amount of solution is called a concentrated solution. This type of solution has a relatively large amount of solute in a given amount of solvent. A solution is a homogeneous mixture of two or more pure substances. In the case of a concentrated solution, the ratio of solute to solvent is greater compared to a dilute solution, which contains a smaller amount of solute relative to the solvent.

The substance present in the larger amount is the solvent, which can dissolve other substances called solutes. During the process of dissolving, the solute particles are evenly distributed throughout the solvent creating a uniform composition. This even distribution makes the resulting solution homogeneous, meaning that the composition is the same throughout. The molarity of a solution refers to its concentration, providing a measure of the number of moles of solute per liter of solution.

Answer:

A

Explanation:

I believe it is negative 1.

Answer:

(A) -1

Explanation:

I just did it on edge :)

This is true. You don’t want them to be bored

Answer:

The given statement on extended guest is false. The extended pay guest demand comfort and proper diet, not a schedule of daily activities.

Explanation:

The term extended stay guest refers to those people who live in hotels and other private lodges as guest for more span of time. The purpose of stay may include tour, medical issues, etc. These people demand comfort as well as first class food.

The main function of people who are offering such type of service must provide them with places and room which are more spacious and provides comfort as well as chefs who have good cooking talent. There is no need for planning daily activities as it is the hands of the guest to do it.

Answer:

37.5 mL.

Explanation:

where, P is the pressure of the gas in atm.

V is the volume of the gas in L.

n is the no. of moles of the gas in mol.

R  is the general gas constant,

T is the temperature of the gas in K.

(V₁n₂) = (V₂n₁)

Knowing that:

V₁  =  75 mL, n₁ = 3.0 mol,

V₂  =  ??? mL, n₂ = 1.5 mol.

(V₁n₂) = (V₂n₁)

∴ V₂ = (V₁n₂)/n₁ = (75 mL)(1.5 mol)/(3.0 mol) = 37.5 mL.

Answer:

4.5 ML that is what i think

Explanation:

Answer:

The rocket is now too heavy to reach its destination.

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Thus the rocket has become too hefty to get to its destination.

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

So as we saw that matter has some mass so mass can be measured in gram only. Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. A rocket is designed to drop its first stage mid-flight. Due to a malfunction, this does not occur. The  possible result of this malfunction is that the rocket has become too hefty to get to its destination.

Thus the rocket has become too hefty to get to its destination.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ5

Answer:

Explanation:

1) Ksp stands for product solubility constant.

2) The product solubility constant is the equilibrium constant used for the aqueous ionization (dissolution) of low soluble ionic compounds.

3) The ionization or equilibrium reaction for the PbBr₂ is:

4) Sotichiometry:

       Ao -  x moles                   x                 2x

5) Calculations:

Per definition of Ksp:

The molar solubility of PbBr₂ in pure water is solved from the solubility product constant (Ksp) and the dissolution stoichiometry. It involves setting up and solving the equation Ksp = 4s³ for the molar solubility 's'. The solution yields the molar solubility as approximately 1.12 x 10⁻² M.

The molar solubility of PbBr₂ in pure water can be determined from its solubility product constant (Ksp). According to dissolution stoichiometry, the molar concentrations of Pb²⁺ and Br⁻ ions are equal and can be represented by 's' for molar solubility. The Ksp of PbBr₂ is therefore s * (2s)² (considering that there are two Br- ions for every PbBr₂ molecule that dissolves).

So Ksp = 4s³. Given Ksp is 6.60×10⁻⁶, we can solve the equation 4s³ = 6.60×10⁻⁶ for 's', the molar solubility.

The molar solubility 's' is a cube root of (6.60 × 10⁻⁶/4), which calculates approximately 1.12 x 10⁻² M.

https://brainly.com/question/28170449

#SPJ3

Answer:

NaNH2 is the answer

Explanation:

Answer: Option (c) is the correct answer.

Explanation:

An organic compound that contains the functional group "[tex]-CONH_{2}[/tex]" is known as an amide.

General chemical formula of an amide is [tex]RCONH_{2}[/tex], where R can be alkyl or aryl group.

For example, [tex]CH_{3}CH_{2}CONH_{2}[/tex] is a primary amide whose name is ethanamide.

A compound that contains a functional group "-NCO" is known as an isocyanate group.

And, "-CN" functional group is known as cyanate group.

[tex]NaNH_{2}[/tex] is a compound called sodamide and it is a specific formula.

Hence, we can conclude that the most basic general formula for the amide is [tex]RCONH_{2}[/tex].

Answer:

Choice 5.: -1397.6 kJ/mol rxn.

Explanation:

Here's how to find the enthalpy change of a reaction [tex]\Delta H_\text{rxn}[/tex] from the standard enthalpy of formation [tex]\Delta H_\text{f}\textdegree{}[/tex] of each species.

[tex]\Delta H_\text{f}\textdegree{} = 0[/tex] for the most stable allotrope of each elements under their standard state. For example,

As a result, [tex]\Delta H_\text{f}\textdegree{} = 0[/tex] for [tex]\text{O}_2\;(g)[/tex]. Note the gaseous state symbol. This value is implied such that it's not provided in the question.

For this reaction:

[tex]\Sigma \left[\Delta H_f\textdegree{}(\textbf{Products})]\right = 4 \times (+33.2) + 6\times (-285.83) = -1582.18\;\text{kJ}\cdot\text{mol}^{-1}[/tex].

[tex]\Sigma \left[\Delta H_f\textdegree{}(\textbf{Reactants})]\right = 4 \times (-46.11) + 7\times 0 = -184.44 \;\text{kJ}\cdot\text{mol}^{-1}[/tex].

Apply the equation:

[tex]\begin{aligned} \Delta H_\text{rxn} &= \Sigma \left[\Delta H_f\textdegree{}(\textbf{Products})]\right - \Sigma \left[\Delta H_f\textdegree{}(\textbf{Reactants})]\right\\ &= -1582.18\;\text{kJ}\cdot\text{mol}^{-1} - (-184.44 \;\text{kJ}\cdot\text{mol}^{-1})\\ &= -1397.74\;\text{kJ}\cdot\text{mol}^{-1}\end{aligned}[/tex].

The enthalpy of the given reaction is close to -1766 kJ/mol rxn. This is calculated by subtracting the total enthalpy of formation of the reactants from that of the products.

To determine the enthalpy of the given reaction, we need to calculate the total enthalpy of formation of the products and subtract the total enthalpy of formation of the reactants from it.

The general formula for calculating enthalpy (∆H) in a reaction is: ∆H = Σ ∆Hf(products) - Σ ∆Hf(reactants).

For the products: 4 mol of NO2(g) and 6 mol of H2O(l), ∆Hf = [4(-33.2 kJ/mol) + 6(-285.83 kJ/mol)] = -1980.92 kJ.

For the reactants: 4 mol of NH3(g) and 7 mol of O2(g), ∆Hf = 4(-46.11 kJ/mol) = -184.44 kJ (Note: The enthalpy of elements in their standard state, like O2(g), is zero).

Finally, the enthalpy of the reaction (∆H) = -1980.92 kJ - (-184.44 kJ) = -1796.48 kJ. Hence the closest option is -1766 kJ/mol rxn.

https://brainly.com/question/29254242

#SPJ11

Answer:

Explanation:

Just as context, write the chemical equation and the mole ratios

1) Balanced chemical equation:

2) Therotetical (stoichiometric) mole ratios:

You can calculate the percent yield from the amount of CuSO₄ obtained and the theoretical yield

3) Percent yield

         Percent yield = (actual yield / theoretical yield)×100

Substitute the values in the formula:

Answer:

did you ever find the answer

Explanation:

Answer: [tex]0.75\times 10^{-12}[/tex]

Explanation:

Formula used :

[tex]a=\frac{a_o}{2^n}[/tex]

where,

a = amount of reactant left after n-half lives = ?

[tex]a_o[/tex] = Initial amount of the reactant = [tex]6\times 10^{-12} g[/tex]

n = number of half lives = 3

Putting values in above equation, we get:

[tex]a=\frac{6\times 10^{-12} }{2^3}[/tex]

[tex]a=\frac{6\times 10^{-12} }{8}[/tex]

[tex]a=0.75\times 10^{-12}[/tex]

Therefore, the amount of carbon-14 left after 3 half lives will be [tex]0.75\times 10^{-12}g[/tex]

2HNO3+3H2S ——>2S+4H2O+2NO

Answer:

14.434 r.a.m.

Explanation:

∵ The atomic mass of N = ∑(atomic mass of each isotope)(its abundance)

∴ The atomic mass of N = (atomic mass of N-14)(abundance of N-14) + (atomic mass of N-16)(abundance of N-16)

atomic mass of N-14 = 14.0 r.a.m, abundance of N-14 = percent of N-14/100 = 78.3/100 = 0.783.

atomic mass of N-16 = 16.0 r.a.m, abundance of N-16 = percent of N-16/100 = 21.7/100 = 0.217.

∴ The atomic mass of N = (atomic mass of N-14)(abundance of N-14) + (atomic mass of N-16)(abundance of N-16) = (14.0 r.a.m)(0.783) + (16.0 r.a.m)(0.217) = 14.434 r.a.m.

Answer:

Explanation:

The coefficients are the numbers that you put in front of each chemical formula that represents the reactants and products in the chemical equation. They indicate the mole ratio in which the elements or compounds react to form the products, as per the chemical equation.

See an example:

      This equation is not balanced: the  number of atoms of oxygenin the reactant side is 2 while the number of atoms of oxygen isn the product side is 1. In order to balance the equation you need to add some coefficients.

When no coefficients are shown it is understood that the coefficient is 1.

The coefficients 2 in front of H₂ and 1 (understood) in front of O₂, in the reactant side, and 2 in front of H₂O, in the product side, balance the equation.

Those coefficients mean that the 2 molecules (or mole of molecules) of H₂ react with 1 molecule (or mole of molecules) of O₂ to form 2 molecules (or moles) of H₂O (product side).

That is the mole ratio: 2 H₂ : 1 O₂ : 2 H₂O.

Notice that, in spite of the aboslute numbers may change, the mole ratio is unique for any chemical reaction.  For example 4 : 2 : 4 is the same ratio that 2 : 1 : 2, or 8 : 4 : 8, but the most common practice is to use the most simple form of the ratio, i.e. 2: 1: 2.

The representation that coefficients that are found in a chemical equation provide, is :  number of moles that is present in the reactants as well as products.

Learn more at:

https://brainly.com/question/12271256?referrer=searchResults

Answer:

D. Solid state

Explanation:

In solid state the particles of  a substance, vibrate in fixed positions though they posses less kinetic energy. This is the reason as to why the particles do not move far apart from each other making the solids remain in fixed shapes unless an extra energy is added.

Since solids cannot move and can only fluctuate around their mean position, they have the lowest kinetic energy. Despite the fact that liquids have more kinetic energy than solids. Here the correct option is D.

Solids are composed of the least energy particles. They are packed close together, giving them little room to maneuver. The energy of a gas's particles is the highest, with a liquid's particles having higher energy than a solid's.

A pure substance has more energy in its gaseous state than it does in its liquid state, which has more energy than it does in its solid state. When particles are in a gaseous form, their kinetic energy is at its maximum.

Thus the correct option is D.

To know more about states of matter, visit;

https://brainly.com/question/9402776

#SPJ6

Answer:

c

Explanation:

usa test prep

Answer:

Helium is created from hydrogen in the sun's core.

Four hydrogen-1 nuclei fuse to produce

Explanation:

Step One:

[tex]{\rm ^1_1 H + ^1_1 H\to ^2_1 H + e^{+}} + v_e[/tex].

Two hydrogen-1 nuclei fuse. One proton will convert to a neutron. The products will be

Step Two:

[tex]\rm ^1_1 H +^2_1 H \to ^3_2 He[/tex].

There are plenty of hydrogen-1 nuclei available in the core of the sun. The hydrogen-2 nucleus from step one will fuse with a hydrogen-1 nucleus. The product is

Step Three

[tex]\rm ^3_2 He + ^3_2 He \to ^4_2 He + ^1_1 H + ^1_1 H[/tex].

Two helium-3 nuclei from step two react with each other. The products are:

The overall reaction will be:

[tex]{\rm 6\; ^1_1 H \to ^4_2 He + 2\; ^1_1 H+2\; e^{+}}+v_\text{e}[/tex].

[tex]{\rm 4\; ^1_1 H \to ^4_2 He + 2\; e^{+}} + v_\text{e}[/tex]

In other words, hydrogen nuclei in the core of the sun fuse together to form helium.

Answer : The correct options is, [tex]H_2O\text{ and }H_3O^+[/tex]

Explanation :

According to the Bronsted Lowry conjugate acid-base pair concept, an acid is a substance which donates protons and a base is a substance which accepts protons.

From the given options, [tex]H_2O[/tex] and [tex]H_3O^+[/tex] represents a base-conjugate acid pair.

The balanced reaction will be :

[tex]H_2O+H^+\rightleftharpoons H_3O^+[/tex]

In this, [tex]H_2O[/tex] is a base which accepts a proton to form conjugate acid [tex]H_3O^+[/tex].

Hence, the correct options is, [tex]H_2O\text{ and }H_3O^+[/tex]

H₂PO₄⁻ and HPO₄²⁻ is a base–conjugate acid pair

In a chemical reaction, a base and its conjugate acid are related through the transfer of a proton (H⁺). In the given options, H₂PO₄⁻ (dihydrogen phosphate ion) can act as a base and HPO₄²⁻ (hydrogen phosphate ion) can act as its conjugate acid.

When H₂PO₄⁻ accepts a proton (H⁺), it forms HPO₄²⁻, gaining a positive charge. This is the process of protonation, where a base accepts a proton to become its conjugate acid.

H₂PO₄⁻ + H⁺ → HPO₄²⁻

Conversely, when HPO₄²⁻ donates a proton (H⁺), it forms H₂PO₄⁻, losing a positive charge. This is the process of deprotonation, where an acid donates a proton to become its conjugate base.

HPO₄²⁻ → H₂PO₄⁻ + H⁺

Therefore, H₂PO₄⁻ and HPO₄²⁻ form a base-conjugate acid pair. The other options do not represent a base-conjugate acid relationship. H₂O and H₃O⁺ are related as a base and its conjugate acid in the reverse reaction of H₃O⁺ donating a proton to form H₂O. H₂O and H₂PO₄⁻ are not related as a base-conjugate acid pair, as H₂O is a neutral molecule and H₂PO₄⁻ is a base. H₂PO₄⁻ and H₃O⁺ are not a base-conjugate acid pair as they both represent acids.

To learn more about base–conjugate acid pair, here

https://brainly.com/question/32311417

#SPJ6

Answer:

10 mol/L

Explanation:

Molarity or concentration is given by the formula;

Molarity = Number of moles/Volume in Liters

In this case; number of moles = 100 and Volume = 10 L

Therefore;

Molarity = 100 moles/10 L

             = 10 mol/L

The answer is 10 mol/L

The half-life of cobalt-60, based on the provided information and the calculation method where the sample mass decreases to a quarter over two half-lives (10.5 years), is confirmed to be 5.27 years. This example illustrates how the half-life concept helps in understanding the decay rate of radioactive isotopes.

To calculate the half-life of cobalt-60 given that the mass of a cobalt-60 sample decreased from 0.800g to 0.200g over a period of 10.5 years, we use the concept of half-lives. The question implies that the sample underwent two half-lives for its mass to decrease to 0.200g from 0.800g.

Here's why: after one half-life, the mass would decrease to 0.400g (half of 0.800g), and after another half-life, it would decrease to 0.200g (half of 0.400g), totaling a decrease over two half-lives.

Given the provided information that the half-life of cobalt-60 is 5.27 years, this aligns perfectly with our calculation method. After 10.54 years (which is approximately the given time span of 10.5 years), two half-lives would have passed, confirming the half-life of cobalt-60 as 5.27 years.

This demonstrates a practical application of understanding radioactive decay and the significance of half-life in measuring how quickly unstable isotopes decline to half their original amount.

Answer:

14 g.

Explanation:

the solubility of lead(II) nitrate, Pb(NO₃)₂, in 100 grams of water has a temperature of 30ºC is (66 g).

When beaker containing 80 grams of lead(II) nitrate, Pb(NO₃)₂, in 100 grams of water has a temperature of 30ºC.

∴ The grams of the salt are undissolved, on the bottom of the beaker are (14 g).

80 grams of lead(II) nitrate in 100 grams of water at 30ºC results in 66 grams (option c) of undissolved lead(II) nitrate.

To solve this problem, we need to know the solubility of lead(II) nitrate (Pb(NO₃)₂) in water at 30 ºC.

The solubility of Pb(NO₃)₂ in water at 30 ºC is approximately 122 g/100 mL.

Since we have 100 grams of water, we can calculate the maximum amount of Pb(NO₃)₂ that can dissolve:

Maximum soluble Pb(NO₃)₂ = 122 g/100 mL × 100 g / 1000 mL = 12.2 g

We started with 80 grams of Pb(NO₃)₂, so the amount of undissolved salt is:

Undissolved Pb(NO₃)₂ = 80 g - 12.2 g = 67.8 g ≈ 66g

Therefore, approximately 66 grams of lead(II) nitrate remain undissolved at the bottom of the beaker.

Complete Question - A beaker containing 80 grams of lead(II) nitrate, Pb(NO₃)₂, in 100 grams of water has a temperature of 30 ºC. Approximately how many grams of the salt are undissolved, on the bottom of the beaker?

a) 20 grams

b) 80 grams

c) 66 grams

d) 14 grams

Answer:

D. are transmitted equally through a fluid

Explanation:

1988 was when it was first introduced

Final answer:

DNA evidence was first introduced in 1988 and has since revolutionized forensic science. Its discovery by Miescher in 1869 and subsequent research paved the way for its pivotal role in modern biology and criminal justice.

Explanation:

DNA evidence was first introduced in 1988. This introduction of DNA for forensic purposes marked a monumental advancement in the field of criminal investigations and legal proceedings. The science of DNA was discovered by Friedrich Miescher in 1869, and significant developments unfolded over the years, leading to our contemporary understanding of DNA as the genetic material responsible for heredity. Experiments by scientists such as Oswald Avery, Colin MacLeod, and Maclyn McCarty in the 1940s, and the discovery of the 3D-double-helix structure by James Watson and Francis Crick in 1953, set the stage for the many applications of DNA science we see today, including forensic analysis.

Answer:

3

Explanation:

Answer:

warming up the solution.

Explanation:

The solubility of solid solutes in liquid solvents increases as the solvent is warmed up.

A supersaturated solution can be converted back to a saturated solution by perturbing the solution through methods like adding a seed crystal or mechanical agitation, which facilitate the precipitation of excess solute.

To turn a supersaturated solution back into a saturated solution, you could either add more solute, warm the solution, or both. In a supersaturated solution, the concentration of solute exceeds its solubility, unbalancing the state of equilibrium and resulting in the precipitation of solutes when disturbed. This happens because the temperature dependence of solubility allows solutions to be supersaturated at an elevated temperature and then cooled to a lower temperature without resulting in solute precipitation.

One method by which you can induce this precipitation is by adding a seed crystal, which serves as a template for the excess solute to crystallize onto. Mechanical agitation is another method that can be used, disturbing the stability and equilibrium of the supersaturated solution and causing the precipitate to form, effectively turning the solution back into a saturated one.

https://brainly.com/question/15445010

#SPJ3

Answer:

[tex]\boxed{\text{The line spectra of stars indicate which elements are present.}}[/tex]

Explanation:

Each element has a characteristic spectrum, so analyzing the line spectra of stars tell you what elements are present.

A is wrong. The statement is true, but its not the reason why astronomers study stars.

B is wrong. The colour is a function of the star's temperature.

D is wrong. Line spectra give no information on the size of stars.

The study of metals in chemistry is called inorganic metals.

The correct option is C.

Each metal when burns give the color due to the replacement of the electron because the amount of energy is increased due to heat.

According to the question, the rest of the option is wrong because they don't have any link with the hint.

Hence, the correct option is C that is the line spectra of stars indicating which elements are present.

For more information, refer to the link:-

https://brainly.com/question/22810476