Answer:
c
Explanation:
heatmass*density*temp. difference=
In the sample, the mass of water is "225 g".
Given:
Heat energy,
[tex]Q = 1.13\times 10^4 \ J[/tex]Specific heat,
[tex]c = 4.186 \ J/g.^{\circ} C[/tex]The change in temperature,
[tex]\Delta T =boiling \ point - 88.0^{\circ} C[/tex][tex]= 100-88[/tex]
[tex]= 12 ^{\circ} C[/tex]
As we know,
→ [tex]Q = mc \Delta T[/tex]
→ [tex]1.13\times 10^4=m\times 4.186\times 12[/tex]
→ [tex]m = \frac{1.13\times 10^4}{4.186\times 12}[/tex]
→ [tex]= 224.956 \ g[/tex]
or,
→ [tex]= 225 \ g[/tex]
Thus the answer above is appropriate.
Learn more about mass here:
https://brainly.com/question/2447372
ASAP help with these please.
Answer:
1. See explanation below
2. Density
3. Masses
Explanation:
1. Your picture is a bit too small to see the values but maybe this will help you.
To determine the maximum maximum mass in grams that triple beam balance can measure all you have to do is add up the maximum of each beam. So all you need to do is see the value at the last notch of each beam.
However, if you are referring to the picture that is attached in the bottom: The answer would be 610g. Because the last notches of each beam are as follows:
100 g
500 g
10 g
So we add that we get 610g.
2. density can be computed using the formula:
D = M/V
where:
D = density
M = mass
V = volume
As you can see in the both figures A and B measure 20 g, this means that their masses are the same. The density of objects can be different when either their masses, or their volumes are different. So even if they have the same mass, they can have different densities because they have different volumes.
3. Force of gravitational attraction between two objects is dependent on the masses of the two objects and the distance. The larger the mass, the stronger the gravitational force of attraction. This means that they have a direct relationship. Now when it comes to distance, the further apart they are the weaker the gravitational force of attraction, or in other words, they are indirectly related.
PLS HELP: CHEMISTRY
How many C8H18 molecules are in 0.83 mL of
C8H18, the mass of which is 0.68 g?
Answer in units of molec.
Answer:
3.59x10^21 molecules
Explanation:
1mole of a substance contains 6.02x10^23 molecules.
Therefore, 1mole of C8H18 will also contain 6.02x10^23 molecules
1mole of C8H18 = (12x8) +(18x1) = 96 + 18 = 114g.
1mole (i.e 114g) oh C8H18 contains 6.02x10^23 molecules.
Therefore, 0.68g of C8H18 will contain = (0.68 x 6.02x10^23)/114 = 3.59x10^21 molecules
To find the number of C8H18 molecules in 0.83 mL of C8H18 with a mass of 0.68 g, calculate the number of moles based on the molar mass and then multiply by Avogadro's number to get approximately 3.58 x 10^21 molecules.
To calculate the number of C8H18 molecules in 0.83 mL of C8H18 with a mass of 0.68 g, we can follow these steps:
Find the molar mass of C8H18. The molar mass of C8H18 (octane) is 114.23 g/mol.
Calculate the number of moles of C8H18 using the mass provided. Number of moles = mass / molar mass = 0.68 g / 114.23 g/mol.
Convert the number of moles to molecules using Avogadro's number (6.02 x 1023 molecules/mol).
The calculation will be as follows:
Number of moles = 0.68 g / 114.23 g/mol ≈ 0.00595 moles
Number of molecules = 0.00595 moles x 6.02 x 1023 molecules/mol ≈ 3.58 x 1021 molecules
Which of the following statements is true?
A. The freezing and boiling temperatures of a substance are the same.
B. The freezing and condensation temperatures of a substance are the same.
C. The freezing and melting temperatures of a substance are the same.
D. The freezing, melting, and boiling temperatures of a substance are the same.
The answer is likely to be A
Answer: The awnser us B
Explanation: Because both of the temperatures for condensing and freezing are the same thing 32 degrees.
Draw the structure for 2,4,6-trimethylphenol
Answer:
Attached.
Explanation:
I'm assuming Lewis structure is fine.
Cresol or trimethylhydroquinone, commonly known as 2,4,6-trimethylphenol, is an organic molecule with the chemical formula C9H12O. Because a hydroxyl group (-OH) is attached to a benzene ring, it is classified as a phenol.
The benzene ring serves as the main structural component of 2,4,6-trimethylphenol, which also has three methyl groups (CH) bonded to the carbon atoms at the 2, 4, and 6 positions. The chemical nomenclature, which refers to the exact locations of the substituents on the ring, is influenced by these methyl groups. At position 1, the hydroxyl group is attached to the benzene ring. 2,4,6-trimethylphenol is a phenolic chemical because it contains a hydroxyl group and exhibits some of the characteristics of phenols.
Learn more about benzene ring, here:
https://brainly.com/question/31763415
#SPJ6
The science student wants to find the mass of a wooden block. What is its appropriate name and use of the equipment
Answer:
A measuring balance can be used to find the mass of a wooden block.
Mass can simply be defined as the amount of matter which is present in an object. The mass of wooden objects is measured with a measuring balance such as the triple beam balance.
The object to be measured is placed in the left side of the balance. Then the mass is leveled off.
The balanced reaction equation for combustion of heptane, C7H16, is
C7H16+11O2⟶7CO2+8H2O
If the reaction produced 34.5 g CO2,
how many grams of heptane were burned?
Answer: m = 11.2 g C7H16
Explanation: First convert the mass of CO2 to moles. Then do the mole ratio between CO2 and C7H16 which is 7:1. Finally convert the moles of C7H16 to the mass of C7H16.
Solution attached.
The grams of heptane were burned is 88.8 grams .
Explanation:The balanced reaction equation for the combustion of heptane, C7H16, is:
C7H16 + 11O2 → 7CO2 + 8H2O
To find out how many grams of heptane were burned, we can use the stoichiometry of the reaction. The molar ratio between heptane and CO2 is 1:7. So, we can set up a simple proportion to solve the problem.
Let 'x' be the mass of heptane:
(34.5g CO2) / (44.01g/mol CO2) = x / (114.22g/mol heptane)
Using this formula, we find that x = 88.8g. Therefore, 88.8 grams of heptane were burned.
Learn more about heptane combustion here:https://brainly.com/question/35909313
#SPJ3
a chemist measured 75.00g of HCL into a volumetric flask and added water until the volume was 1.000 L. what is the molarity of the resulting hydrochloric acid solution?
Answer: M = 2.08 M
Explanation: Molarity is expressed as the number of moles per unit volume in liters. First convert the mass of HCl to moles using its molar mass. Then substitute the variables to the formula for molarity.
75.00 g HCl x 1 mole HCl / 36 g HCl
= 2.08 moles HCl
For Molarity.
M = n / L
= 2.08 moles HCl / 1.000 L
= 2.08 M
Compare heat vs. temperature
Answer:
See the answer beloew, please.
Explanation:
The concepts of heat and temperature are related, but they are not the same. Temperature refers to a physical quantity which indicates the amount of heat. The latter corresponds to the energy that moves from one body to another, thus being able to raise or lower the temperature.
Final answer:
Heat refers to the transfer of thermal energy, measured in joules, while temperature measures the kinetic energy of particles, observed via a thermometer. Temperature influences chemistry by affecting states of matter and reaction rates.
Explanation:
Many often confuse heat with temperature, yet they refer to different aspects of thermal energy. Temperature is a measure of the average kinetic energy of the particles in a substance and is what we measure with a thermometer. On the other hand, heat is the transfer of thermal energy due to a temperature difference between objects. It is a form of energy flow from a warmer object to a cooler one and is measured in joules or calories. A high temperature might make us feel 'hot', but it is the flow of heat to or from our bodies that we truly sense.
Temperature plays a critical role in chemistry; it affects the state of matter and the rate of chemical reactions. For instance, when ice turns into water, it is because of an increase in temperature. Similarly, many chemical reactions speed up with higher temperatures, and keeping unstable materials like enzymes at lower temperatures can prolong their stability.
For an element such as sodium, how many ionization energies are there?
Answer:
Sodium has 496KJ/mol ionization energy.
Explanation:
Ionization energy is the process in which electron which is present in the outermost shell is removed with the absorption of energy by the electron. Different atoms have different ionization energies. When we go from left to the right in the periodic table, ionization energy increases due to atomic size decrease. When we go from top to bottom in the periodic table, ionization energies decreases due to increase the atomic size. Sodium has 496KJ/mol ionization energy which means the outermost electron needs 496KJ/mol energy for removal.
Final answer:
Sodium, with atomic number 11, has 11 ionization energies, each corresponding to one of its 11 electrons. The first ionization energy involves removing the loosely held valence electron, resulting in the formation of a sodium ion (Na+). Each subsequent ionization energy is higher due to greater electrostatic attraction after each electron removal.
Explanation:
For an element such as sodium, the number of ionization energies corresponds to the number of electrons an atom has, which is 11 for sodium. Each removal of an electron from an atom requires more energy than the last due to the increased electrostatic attraction between the remaining electrons and the nucleus. This means for sodium there are 11 ionization energies, each removal corresponding to one of sodium's electrons - starting with the outermost electron, which is in the 3s orbital.
The first ionization energy is typically the smallest because it involves removing the most loosely held electron. As you proceed to remove more electrons, the ion becomes more positively charged and the remaining electrons are more strongly attracted to the nucleus. Hence, each successive ionization energy is greater than the previous one, often with a significant jump observed when starting to remove core electrons that are closer to the nucleus and more tightly bound.
The alkali metal sodium, with atomic number 11, has an electronic configuration of [Ne]3s¹. This 3s electron is the valence electron and is the easiest to remove. Once this electron is removed, sodium becomes a sodium ion (Na+) with a +1 charge.
How many grams of magnesium are needed to completely react
with 2.00 mol of O2 in the synthesis reaction that produces
magnesium oxide?
97.22 grams of magnesium is needed.
Explanation:
The molar ratio of Mg to O2 to make MgO is 2:1
Here, we have 2 moles of O2, therefore we need 4 moles of Mg.
1 mol of Mg = 24.305 g
Therefore
4 moles of Mg = 4 [tex]\times[/tex] 24.305 g
= 97.22 g
Hence we need 97.22grams of magnesium are needed to completely reactwith 2.00 mol of O2 in the synthesis reaction that producesmagnesium oxide.
If a woman has brown eyes with the recessive allele for blue eyes (Bb), each of her sex cells will have
The correct answer is 50% of her eggs will carry the allele B, and the remaining 50% will carry the allele b.
If a woman has the genotype Bb for eye color, where B represents the dominant allele for brown eyes and b represents the recessive allele for blue eyes, each of her sex cells (eggs or ova) will have one of the two possible alleles, either B or b.
During the process of meiosis, which is the cell division that produces gametes (sex cells) in humans, the two alleles for a particular gene separate and end up in different gametes.
Specifically, in the case of this woman with the genotype Bb:
1. During meiosis, the homologous chromosomes carrying the alleles for eye color will separate, resulting in two different types of gametes (eggs).
2. Half of her eggs will contain the allele B (for brown eyes), and the other half will contain the allele b (for blue eyes).
Therefore, if a woman has the genotype Bb (brown eyes with the recessive allele for blue eyes), each of her sex cells (eggs) will have either the allele B or the allele b, but not both.
In other words, 50% of her eggs will carry the allele B, and the remaining 50% will carry the allele b.
This is known as the law of segregation, which states that during gamete formation, the two alleles for a particular gene separate, and each gamete receives only one of the two alleles.
Question 4 (1 point)
In an endothermic reaction products are _
than reactants.
in potential energy and
stable
higher, more
Answer:
In an endothermic reaction, products are higher than reactants in potential energy and less stable
Explanation:
An endothermic reaction is a reaction that needs energy to happen. The energy needed from the endothermic reaction is taken from the system. In this reaction, the reactant will absorb the energy so they will make a product with higher energy.
Since energy moves from a higher potential to lower potential, the product of the endothermic reaction is less stable.
What does a magnetic field look like?
Final answer:
Magnetic fields are depicted by magnetic field lines that indicate the direction and strength of the field around a magnet, which can be visualized with compasses or iron filings. The lines form closed loops and originate at the magnet's North pole, looping to the South pole.
Explanation:
Magnetic fields can be described and visualized through the use of magnetic field lines. These lines start at the North pole of a magnet and end at the South pole, forming closed loops that indicate the direction and strength of the magnetic field. To map out magnetic field lines, one might employ a small compass and trace the direction at multiple points around the magnet, or sprinkle iron filings to observe the lines directly. Magnetic field lines have specific properties, such as always forming closed loops and being tangent to the direction of the magnetic field at any given point.
In terms of visual representations, one commonly sees patterns where the field lines emerge from the North pole, loop around to the South pole, and continue through the magnet, indicating continuity. For electric currents, such as in a wire, the direction of the magnetic field can be determined using the right-hand rule, and it can be visualized using a circle of compasses or iron filings that align tangentially to the field lines created by the current.
Real-world examples include the Earth's magnetic field, which resembles the field of a giant bar magnet with a North and South pole, as well as the magnetic fields around solenoids and bar magnets shown through the distribution of iron filings.
What occurs in solvation?
A.) Solvent molecules surrounds solute ions.
B.) Ionic compounds are formed
C.) Solute ions separate from solvent molecules.
D.) Solvent molecules bind covalently to solute molecules.
Answer:
Choice A
Explanation:
Solvation describes the surrounding of solute ions by solvent molecules.
Final answer:
Solvation involves the intermolecular interactions of a solute with the surrounding solvent. In the case of ionic solutes, solvent molecules surround each ion and separate it from the rest of the solid. In the case of molecular solutes, each particle of the solute is surrounded by solvent particles, forming a solution. The correct option is A.
Explanation:
Chemically, a solvent will dissolve or "solvate" a solute. Solvation describes the intermolecular interactions of a molecule or ion in solution with the surrounding solvent. In the case of solvation in polar solvents, such as water, solvent molecules surround each ion of the ionic solute and separate it from the rest of the solid. This process is also referred to as hydration. On the other hand, in the case of solvation of a molecular solute like sucrose, each particle of the solute is surrounded by particles of the solvent, forming a solution.
Nitrogen has a proton number of 7, it also hos 7 neutrons What is the nucleon number of nitrogen?
Answer:
Nitrogen has an atomic number of 7
Explanation:
Answer:
14
Explanation:
nucleon number= number of protons+ number of neutrons
The purpose of controlling an experiment is to _____. A. double-check your own work B. compare one theory to another theory C. prevent the question from being testable D. make sure the results of the experiment are useful
D
Make sure the results of the experiment are useful
Explanation:
In an experiment, certain variables (independent variables) are controlled to check how they affect other variables (dependent variables) and understand the relationship between them. Also, these experiments usually have a control experiment, of no change, to help compare results and increases their reliability.
Please show full working out 50 points :)
Answer:
The answer is-2168kj/mol
Explanation:
Formula is product-reactant
Product is B2O3+3H2O
B2O3=-1274kj/mol
3H2O=3(-286)=-858kj/mol
Reactant is B2H6
B2H6=36kj/mol
Product-reactant=-858-1274-36
=-2168kj/mol
Answer:
first you subtract then you divide the equation an the you get your ansewe
Explanation:
Show a correct numerical setup for calculating the
number of moles of CO2 (gram-formula mass =
44 g/mol) present in 11 grams of CO2.
Final answer:
To calculate the number of moles of CO2 present in 11 grams of CO2, divide the mass of CO2 by the molar mass of CO2.
Explanation:
To calculate the number of moles of CO2 present in 11 grams of CO2, we need to use the molar mass of CO2, which is 44 g/mol. We can set up the calculation as follows:
Number of moles = Mass of CO2 / Molar mass of CO2
Number of moles = 11 g / 44 g/mol
Number of moles = 0.25 mol
Therefore, there are 0.25 moles of CO2 present in 11 grams of CO2.
Describe the energy transformation when a match burns.
Your answer should include at least 2 complete sentences.
How does the position of a constellation change seasonally? Choose the two correct answers.
A.
It shifts from west to east.
B.
It shifts from east to west.
C.
It rotates around Earth.
D.
It revolves around the sun.
E.
It may be higher in the sky during winter.
Answer:
C,A
Explanation:
Answer:
c and a
Explanation:
If a lake became too acidic, which of the following describes the best way that scientists could determine how to make the lake more
neutral?
A. Dump a large quantity of a base, such as sodium hydroxide, into the lake.
B. Use samples of the lake water as models for testing the results of adding various chemicals.
C. Siphon off the acidic portions of the lake and leave the rest of the water alone.
D. Double the amount of water in the lake, so the acidity will be diluted.
Answer:
B
Explanation:
well it can be D cause doubling the water wont fix things for the future and may not be done. C wont fix it cause you arent solving the problem jus holding it off and it cant A causing dumping bad stuff into the lake started the problem. Its deff B
What is the mass in grams of 2.6 moles of angelic acid?
Answer:
260.34g
Explanation:
First, you need to know what angelic acid is comprised of. It is written as C₅H₈O₂.
In order to solve for the mass of 2.6 moles of angelic acid, you need the mass of 1 mole of angelic acid. This can be found by adding the masses from the periodic table, like shown below:
5 carbon atoms = (5)(12.01g) = 60.05g
8 hydrogen atoms = (8)(1.01) = 8.08g
2 oxygen atoms = (2)(16) = 32g
angelic acid = 60.05 + 8.08 + 32 = 100.13g
Then, set up a basic stoichiometric equation and solve. The units should cancel out.
[tex](\frac{2.6mol}{1} )(\frac{100.13g}{1mol} )=260.34g[/tex]
The mass in grams of 2.6 moles of angelic acid is 296.78 g.
Explanation:To find the mass in grams of 2.6 moles of angelic acid, we need to use the molar mass of the compound. The molar mass of angelic acid is the sum of the atomic masses of all the elements present in the compound. According to the chemical formula of angelic acid (C6H10O2), the atomic masses of carbon, hydrogen, and oxygen are 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol respectively.
So, the molar mass of angelic acid can be calculated as:
Molar mass = (6 x atomic mass of carbon) + (10 x atomic mass of hydrogen) + (2 x atomic mass of oxygen)
Molar mass = (6 x 12.01 g/mol) + (10 x 1.01 g/mol) + (2 x 16.00 g/mol)
Molar mass = 72.06 g/mol + 10.10 g/mol + 32.00 g/mol
Molar mass = 114.16 g/mol
The mass in grams of 2.6 moles of angelic acid can be calculated using the following conversion factor:
Mass (g) = Moles x Molar mass
Mass (g) = 2.6 moles x 114.16 g/mol
Mass (g) = 296.78 g
Learn more about molar mass here:https://brainly.com/question/31327254
#SPJ3
A television set changes electrical energy to sound and light energy.In this process, some energy is
Final answer:
In the transformation of electrical energy to sound and light by a television set, some energy is lost as heat due to the inefficiency of the device.
Explanation:
A television set changes electrical energy into sound and light energy. During this energy transformation process, some energy is usually lost as heat. This loss is primarily due to the inefficiency of electrical devices, where not all the incoming electrical energy is converted into the desired forms of energy.
The excess energy frequently dissipates as heat, which is released into the surroundings. This process aligns with the laws of thermodynamics, specifically the second law, which states that energy transformations are never 100% efficient.
What is the relationship between mass, distance and gravity?
Answer:
Mass is the measure of the amount of matter in an object. We see that the gravitational force between objects increases as the masses of the objects increase. With distance, we see that the strength of gravity decreases if the distance between two objects increases.
Explanation:
The amount of gravity affecting an object depends on two things: the masses of the objects being attracted and the distance between the objects. Mass is the measure of the amount of matter in an object. ... With distance, we see that the strength of gravity decreases if the distance between two objects increases
Final answer:
Mass, distance, and gravity are interconnected in physics through Newton's law of gravitation.
Explanation:
The relationship between mass, distance, and gravity is described by Newton's law of universal gravitation. This law states that every point mass attracts every other point mass by a force acting along the line intersecting both points. This force is directly proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between their centers.
Mathematically, the force of gravity (F) between two objects with masses m1 and m2 separated by a distance r is given by:
F = G * (m1 * m2) / r^2
where G is the gravitational constant, approximately equal to 6.674 × 10^-11 N m^2/kg^2.
From this equation, we can see that:
1. The force of gravity (F) is directly proportional to the product of the masses (m1 * m2). This means that if the masses of the objects increase, the force of gravity between them also increases.
2. The force of gravity (F) is inversely proportional to the square of the distance (r^2) between the centers of the objects. This means that as the distance between the objects increases, the force of gravity between them decreases rapidly.
what is the molar mass of calcium?
Answer:
Molar mass of calcium is 40,078 g / mol
Explanation:
Molar mass (M) is the ratio of the mass to the mass of the substance and is expressed in grams per mole (g / mol).
The molar mass of a substance corresponds/it is equal to the relative atomic or relative molecular mass with the addition of the unit g/mol.
The relative atomic mass as well as the relative molecular mass are the basis for expressing the molar mass (M), the mass of one mole of a substance.
How would you describe (in general) the Lewis Dots Diagram for a Cation
Answer:
Explanation -
A Lewis electron dot symbol is a representation of the valence electrons around an atom that uses dot around the symbol of the element. Cations are formed when atoms lose electrons represented by fewer Lewis dots.
The Lewis Dot Diagram for a cation is a representation of the electron configuration after an atom loses one or more electrons. It shows the symbol of the atom with brackets and the number of valence electrons that have been removed.
Explanation:The Lewis Dot Diagram for a cation is a representation of the electron configuration of the cation. In general, cations are formed when an atom loses one or more electrons, resulting in a positive charge. The Lewis Dot Diagram for a cation shows the symbol of the atom with brackets and the number of valence electrons that have been removed. For example, the Lewis Dot Diagram for a sodium cation (Na+) would show the symbol Na with brackets and the number 10 inside the brackets, indicating that one electron has been removed.
Learn more about Cation's Lewis Dot Diagram here:https://brainly.com/question/12520172
#SPJ11
What is Delta.S for the reaction N2(g) +O2(g) Right arrow. 2NO? Use Delta.G = 173.3 kJ at 303.0 K and Delta.H = 180.7 kJ. Use Delta.G = Delta.H – TDelta.S.
7.4 J/K
7.4 kJ/K
24.42 kJ/K
24.42 J/K
Answer:
24.42 J/K
Explanation:
i got it right
Answer:
d
Explanation:
Count the number of each type of atom in the equation below, and then balance the equation. Write in
the numbers of atoms and coefficients. Add a 1 if there should be no coefficient.
CS2D +0266) - C02G) + S026)
so-csco
DONE
CS210) +_0269) ►
00269) +
S029)
DONE
) Intro
The balanced equation is given as, 1 CS₂ + 3 O₂ → 1 CO₂ + 2 SO₂
Explanation:
CS₂ + O₂ → CO₂+ SO₂
Atoms Before balancing After balancing
LHS RHS LHS RHS
C 1 1 1 1
S 2 1 2 2
O 2 4 6 2+4=6
First we have to put 2 in front of SO₂, so the number of S atoms becomes equal on both sides, but the number of O- atoms gets increased as 6 on RHS, to balance that we have to put 3 infront of O₂, so that every atom on both sides of the equation gets balanced.
So the balanced equation is
1 CS₂ + 3 O₂ → 1 CO₂ + 2 SO₂
• 24Pu has a half-life of 14 years. If we start with 100 grams of 241Pu how much will remain
after 42 years and how much would have decayed?
Answer:
The amount of sample remain after 48 years is 12.5 g.
Amount of sample decayed = 100 g- 12.5 g = 87.5 g
Explanation:
Given data:
Half life of Pu²⁴¹ = 14 years
Total amount of sample = 100 g
Sample remain after 42 years = ?
Sample decayed = ?
Solution:
First of all we will calculate the number of half lives.
Number of Half lives = T elapsed / half life
Number of Half lives = 42 years / 14 years
Number of Half lives = 3
At time zero = 100 g
At first half life = 100 g /2 = 50 g
At second half life = 50 g/2 = 25 g
At third half life = 25 g/ 2 = 12.5 g
So the amount of sample remain after 48 years is 12.5 g.
Amount of sample decayed = 100 g- 12.5 g = 87.5 g
How can I find the solution needed for amount of reaction?
Answer:
0.48L of NaOH
Explanation:
Data obtained from the question include:
Number of mole of NaOH = 0.725mol
Molarity of NaOH = 1.50M
Volume of NaOH =?
Molarity = mole /Volume
Volume = mole /Molarity
Volume = 0.725/1.5
Volume = 0.48L
Therefore, 0.48L of NaOH is needed for the reaction