Identify the area where convection is taking place.

Answer:

The definitions of mass, energy, time and space as used in Physics are circular

The Conservation of Mass and Energy

The definition of zero is not sufficiently defined in Physics

Newton’s Laws of Motion are related by Calculus

Knowing the terms of Physics is most important.

Please mark as brainliest

Answer:

Generators may be set up to produce either direct or alternating current

Explanation:

Answer: Conduction

Explanation:

The atoms in the solid move together and create heat

Answer:

conduction

Explanation:

It was right on my quiz please mark brainliest

Answer:

Explanation:

Instantaneous speed is the speed of an object at a given point of time. While the speed we usually calculate is the average speed of the object throughout its journey, instantaneous speed can be determined by calculating the derivative of the average velocity of the object in question.

And the formula for average velocity is

V(avg)= Metre/ second, which is distance/time

Hence its derivative would be

dV(avg)=d(Distance)/d(time) which is the instantaneous speed of the object

Final answer:

Instantaneous speed is calculated by taking the absolute value of instantaneous velocity, which is the magnitude of velocity at a specific moment in time, without considering direction.

Explanation:

The calculation of instantaneous speed requires understanding that it is the magnitude of instantaneous velocity. Instantaneous velocity is a vector quantity that has both magnitude and direction, but when we are interested in the speed at an exact moment in time, we disregard the direction. To calculate the instantaneous speed, one typically takes the absolute value of the instantaneous velocity. For instance, if an object has an instantaneous velocity of -3.0 m/s, indicating motion towards the rear of a plane, its instantaneous speed is 3.0 m/s. Unlike average speed, which is calculated by dividing the total distance traveled by the total time taken, instantaneous speed is concerned solely with the rate of motion at a particular instant.

Instantaneous speed is a scalar quantity and, unlike velocity, does not include any directional information. The instantaneous speed can be determined from the instantaneous velocity by simply looking at its magnitude, without regard for its direction.

Answer:

1. (F) Increasing the frequency variable reduces the time required.

2. (I) Intensity variable can be related the the energy expended.

3.(T) Time variable would affect the speed.

Explanation:

1. (F) increasing the frequency variable implies that the distance would be covered in lesser time. As a wave of 250Hz cover more distance than that of 200Hz.

2. (I) Intensity variable. An increase in this variable implies that more energy is expended.

3.(T) Time variable can either give the required out come or not. As increasing the time would mean that the speed has reduced, while decreasing the time means the distance would be covered quickly. If the required speed is 20m/s, then increasing it to 30m/s imples that lesser time would be recorded. If the reverse is the case, then more time would be recorded. time = distance/speed

1. reduces the time required.

2.energy expended.

3.affect the speed.

Frequency, time period and intensity are quantitative dimensions which describe the amount of physical activity taking place during a given time.

1. (F) frequency variable - Frequency refers to the number of waves that pass a fixed point in unit time.

i.e. [tex]F =\frac{1}{T}[/tex]

When frequency is increased then distance would be covered in lesser time.

For example, a wave of 550Hz cover more distance than that of 500Hz.

2. (I) Intensity variable-  The quantity of energy the wave conveys per unit time across a surface of unit area.

i.e. [tex]I = \frac{P}{4\pi r^{2} }[/tex]

When Intensity increases it implies that more energy is expended.

3.(T) Time variable -It is define as the ratio of distance and time.

i.e. [tex]time = \frac{distance}{speed}[/tex]

When time variable is increased than  the quantity of energy the wave conveys per unit time across a surface of unit area, speed is reduced.

When time variable is decreased  the distance would be covered quickly.

For example : If the speed  of car is 80m/s, then by increasing the speed  to 100m/s shows that lesser time would be required.

Learn more about Frequency, time period and intensity:

https://brainly.com/question/14696244

#SPJ5

To calculate the height of the hill, use the formula h = GPE/Weight with the provided gravitational potential energy (10,500 J) and weight (539 N) of the object. The height equals the GPE divided by the weight, which, upon calculation, gives the height of the hill in meters.

The student is asking how to calculate the height of the hill, given the gravitational potential energy (GPE) and the weight of an object. In physics, the formula to calculate GPE is GPE = mgh, where m is the mass of the object, g is the acceleration due to gravity (approximately 9.8 m/s2 on Earth or 10 m/s2 for simplified calculations), and h is the height.

To find the height, one can rearrange the GPE formula to solve for h, which gives us h = GPE/(mg). The weight of an object is the force due to gravity acting on it, which can be calculated by multiplying the mass by the acceleration due to gravity (Weight = mg). Given that the weight (Weight) of the object is known, we can simplify the formula for height to h = GPE/Weight.

Using the information provided by the student, the GPE is 10,500 J, and the weight is 539 N. Substituting these values into our height formula gives us h = 10,500 J / 539 N, which results in an answer after calculation.

Let's calculate the height:

GPE = 10,500 J

Weight = 539 N

Height h = GPE / Weight = 10,500 J / 539 N

=19.48

A

Explanation:

The earth is spherical. So it's middle part is bulgjng outside. So more sunlight will be incident on the latitude near the equator. This will heat the air and it will rise up. This will cause high pressure difference and polar disturbances.

I hope this satisfies you. I hope u will follow me and make this the brainliest answer.

The Earth's spherical shape ensures that the equator receives the most direct sunlight, resulting in higher temperatures and a low-pressure system due to the rising warm air. This leads to the high precipitation in the equatorial region and plays a significant role in global atmospheric and oceanic circulation patterns.

The spherical shape of the Earth influences the way sunlight is distributed across different latitudes. At the equator, the sun's rays are most direct, resulting in a higher concentration of solar energy and higher temperatures. This intense sunlight is focused on a smaller area, leading to the warm conditions that are characteristic of equatorial regions. Due to the heat at the equator, the air warms up, becomes less dense and creates a low-pressure system.

As a consequence of the heat and low-pressure conditions, there is significant convection, which causes air to rise. This is part of the reason why the equatorial region, also known as the Intertropical Convergence Zone, is often characterized by high precipitation levels. The rising warm air can lead to cloud formation and frequent rainfall. In contrast, at higher latitudes, the sun's rays strike the surface at a more oblique angle, spreading the energy over a wider area and resulting in cooler temperatures and different atmospheric conditions.

Therefore, the correct answer to the question is: C. The latitudes near the equator receive direct sunlight, which causes a low-pressure system.

Complete Question:

A fully loaded Saturn V rocket has a mass of 2.92 x 106 kg. Its engines have a thrust of 3.34 x 107 N. (8 marks)

a) What is the downward force of gravity on the rocket at blast-off?

b) What is the unbalanced force on the rocket at blast-off?

c) What is the acceleration of the rocket as it leaves the launching pad?

d) As the rocket travels upwards, the engine thrust remains constant, but the mass of the rocket decreases. Why?

e) Does the acceleration of the rocket increase, decrease, or remain the same as the engines continue to fire?

Answer:

a) [tex]-2.8616 \times 10^{7} N[/tex] is the downward force of gravity on the rocket at blast-off.

b) [tex]4.784 \times 10^{6} N[/tex] is the unbalanced force on the rocket at blast-off

c) [tex]1.638 \mathrm{m} / \mathrm{s}^{2}[/tex] is the acceleration of the rocket as it leaves the launching pad

d) Because the propellant here is burned up, hence the mass of the rocket seems to be varied (total mass of all its parts). Thereby, the mass decreases when the rocket moves upward.

e) The acceleration of the rocket increases when engines continue to fire

Explanation:

Given:

Mass (m) =  [tex]2.92 \times 10^{6} \mathrm{kg}[/tex]

a) In physics, weight can be defined as the applied force on a body by gravity. It is the product of mass (m) and gravity [tex]\left(g=9.8 \mathrm{m} / \mathrm{s}^{2}\right)[/tex]

  [tex]\text { weight }(W)=m \times g=2.92 \times 10^{6} \times(-9.8)=28.616 \times 10^{6}=-2.8616 \times 10^{7} N[/tex]

The negative sign indicates the downward force of gravity.

b) To find the unbalanced force on the rocket at blast-off,

Accelerating force,

   [tex]F_{a}=F+W=3.34 \times 10^{7}+\left(-2.8616 \times 10^{7}\right)=(3.34-2.8616) \times 10^{7}[/tex]

   [tex]F_{a}=0.4784 \times 10^{7}=4.784 \times 10^{6} N[/tex]

c) Newton’s second law of motion states that the object’s acceleration depends on two variable:

The equation can be given as below,

    [tex]Force =m \times acceleration[/tex]

    [tex]\text { Acceleration }=\frac{F_{a}}{m}=\frac{4.784 \times 10^{6}}{2.92 \times 10^{6}}=1.638 \mathrm{m} / \mathrm{s}^{2}[/tex]

d) The pushing of rocket upward will happen as long as the engine gets fired. The propellant here is burned up, hence the mass of the rocket seems to be varied (total mass of all its parts). Thereby, the mass decreases (taotal mass) when the rocket moves upward.

e) The acceleration of the rocket increases when engines continue to fire

Let consider [tex]F_{a}[/tex] is constant, mass gets decreasing, then the acceleration would be increasing (as mass and acceleration are inversely proportionate to each other) .

Answer:

a)Kicking a ball; b) A car that gets hit

Explanation:

a)

A classic example is when a soccer player kicks a moving ball in another direction by modifying the original direction and speed that the ball brought.

b)

Another example is when a car goes on a highway and suddenly is hit by another car on its side modifying the original direction and speed.

Answer: y = R*sin(2.75*t - δ)

Here δ is just the time offset and for our purposes is pretty irrelevant.  You can in fact set it to zero since we can say we begin timing when the mass crosses equilibrium.  So

y = R*sin(2.75*t)

We want to find a way to use the information "At the equilibrium position, it moves 2.89 m/s."  I am going to use some calculus here since it makes things so much easier.  If you haven't taken calculus yet, most likely your course has given you a formula to use instead.

We know y=0 when t=0, so y is at equilibrium when t=0.  To say it moves 2.89 m/s is then to say that

y'(0) = 2.89.

From here we can differentiate the displacement function, set t=0 and solve for R.  Using the chain rule:

y'(t) = 2.75*R*cos(2.75*t)

y'(0) = 2.75*R

2.75*R = 2.89

R = 1.051

Explanation: Since this is harmonic motion we can assume there is no damping force.  The frequency of the oscillation is given by ω=√(k/m)=√(18.9/2.5)=2.75.  Keep in mind this is angular frequency, i.e. radians per second, not wavelengths per second.  

Answer:

700J

Explanation:

4) Potential energy: 784 J

5) Potential energy: 392 J

Explanation:

4)

The potential energy of an object is the energy possessed by the object due to its position in the gravitational field. It is given by

[tex]PE=mgh[/tex]

where

m is the mass of the object

g is the acceleration of gravity

h is the height of the object from the ground

Here, for the ball sitting on top of the building, we have:

m = 2 kg (mass)

[tex]g=9.8 m/s^2[/tex] (acceleration of gravity)

h = 40 m (height of the builiding)

So, the potential energy is

[tex]PE=(2)(9.8)(40)=784 J[/tex]

5)

As the ball is half way through the fall, the height of the ball is

h = 20 m

The potential energy of the ball now is

[tex]PE = mgh[/tex]

where

m = 2 kg is the mass  of the ball

[tex]g=9.8 m/s^2[/tex] is  the acceleration of gravity

Therefore, the potential energy now is

[tex]PE=(2)(9.8)(20)=392 J[/tex]

And we see that the potential energy has halved: this is because part of the potential energy, during the fall, has been converted into kinetic energy, increasing the speed of the ball (which is in fact accelerating).

Answer:

120J

Explanation:

Work done = Force (N) X Distance (m)

Answer:

Work = 120Nm or 120J

Explanation:

Work is said to be done when a force moves a body over a distance, in the direction of force applied.

Work done = force x distance (in the direction of the force)

Therefore work = force x displacement

As displacement is distance in a specific or specified direction.

From the parameters given

Force = 30N

Displacement = 4m.

Therefore work = force x displacement

                         = 30N x 4m

Work = 120Nm or 120J

Note :J is joules which is the S. I unit of work

I hope this was helpful, Please mark as brainliest.

If you insert a crimp pin incorrectly, the ratcheted crimp tool will not sufficiently crimp the tabs. As a result, the wire may not fully conduct with the pin and the pin will be damaged.

Explanation:

The general theory for crimping all types of connectors is to strip a little bit of insulation off the wire. Then, put the connector into a suitably sized space in the jaws, insert the wire, and crimp it down. For non-ratcheting pliers, it's suggested the connector be re-crimped with the next smallest hole in the jaws.

A good crimp connection is gas tight and won't wick: it is sometimes referred to as a “cold weld”. Like the solder method, it can be used on solid or stranded conductors, and provides a good mechanical and electrical connection.

Inserting a crimp connector into a crimp tool incorrectly can lead to poorly fastened connections, resulting in signal loss, intermittent connectivity, or failure of the electrical connection and may create a safety hazard.

Inserting a crimp connector into a crimp tool facing the wrong way can result in a poor connection as the connector will not be properly fastened to the wire. The specific results depend on the type of crimp connector and tool, but generally, you may end up with a connector that is not adequately compressed, leading to signal loss, intermittent connectivity, or complete failure of the electrical connection. Additionally, it increases the risk of short-circuiting or creating a potential safety hazard since the contact between the conductor and the terminal may not be secure.

Answer:

sucking in air through the turbine.

Explanation:

When an airplane turbine operates, it sucks air through it, compresses the air, causes its pressure to increase in the same way as its temperature and ejects it at high speed through the nozzle-shaped output, creating a high output speed and push force capable of moving the plane horizontally.

Vehicles of the fire department are equipped with water pumps of high pressure, in such a way that, when operating, send a flow of water with high pressure and speed through the hose, this force output of the water is sometimes much greater than the force with which the fireman holds the hose, and hence the difficulty to maneuver the hose.

Now when the fireman points the hose with the water at high pressure and speed coming out of it, into a wall close enough. The Fireman will experience newton's third law in all its splendor, which says that every force of action leads to a reaction, so that the reaction could hurt the fireman operating the hose.

Magnitude of the force = 50N

Explanation:

Let one force be X

And the second force be Y

Both the forces are perpendicular, so α = 90°

The resultant R of the two forces = 100N

Angle between resultant and 1 force, α = 60°

We know,

R² = X² + Y² + 2XYcos 90

100² = X² + Y²

If X makes an angle of Φ = 60°

Then, tan Ф =  Y sin α / X + Y cos α

Putting the values we find,

tan 60 = Y/X

Y  = √3X

Putting Y = √3X in equation 1 we get,

(X)² + (√3X)² = 100 X 100

4X² = 100 X 100

X² = 2500

X = 50N

Therefore, magnitude of the force = 50N

Answer:

(a) -0.636 m/s²

(b) -19.08 N

Explanation:

Given:

Mass of the rocket (m) = 30.0 kg

Initial velocity of rocket (v) = 5.00 m/s

Initial time of rocket (t₁) = 3.00 s

Final velocity of the rocket (u) = -2.00 m/s

Final time of rocket (t₂) = 14.0 s

(a)

Acceleration is given as the rate of change of velocity. Therefore,

[tex]a=\frac{u-v}{t_2-t_1}\\\\a=\frac{-2.00-5.00}{14.00-3.00}\ m/s^2\\\\a=\frac{-7.00}{11.00}\ m/s^2\\\\a=-0.636\ m/s^2[/tex]

Therefore, the acceleration of the rocket is 0.636 m/s².

(b)

From Newton's second law, we know that, force acting on a body is equal to the product of its mass and acceleration.

So, the force acting on the rocket is given as:

[tex]F=ma\\\\F=(30.0\ kg)(-0.636\ m/s^2)\\\\F=-19.08\ N[/tex]

Therefore, the force acting on the rocket is -19.08 N.

The negative sign implies the force acts in the direction opposite to motion.

Explanation:

Work equals the force times the parallel distance.

a) Force gravity is in the downward direction.  The box is moving on flat ground, so there's no displacement in that direction.

W = Fd

W = (50 kg) (-9.8 m/s²) (0 m)

W = 0 J

b) This time, there is a displacement in the vertical direction.

W = Fd

W = (50 kg) (-9.8 m/s²) (5.00 m sin 15.0°)

W = -634 J

c) The force is parallel to the displacement.

W = Fd

W = (100. N) (5.00 m)

W = 500. J

d) Again, the force is parallel to the displacement.

W = Fd

W = (100. N) (5.00 m)

W = 500. J

Answer: 2.4 m/s

Explanation:use KE= 1/2 mv²

Derive to find v:

v = √ 2KE / m

= √ 2 ( 9 J ) / 3 kg

= 2.4 m/s

Answer:

The correct answer is D. wrapping an insulated wire around a metal with ferromagnetic properties and applying an electric current.

Explanation:

Final answer:

The slope of a line on the graph represents the amount of density. A steeper slope indicates a higher density, while a flatter slope indicates a lower density.

Explanation:

The slope of a line on the graph represents the amount of density in this scenario. A steeper slope indicates a higher density, while a flatter slope indicates a lower density.

For example, in the given graph, the steeper slope (green line) indicates a higher density, while the slope of the yellow line is not steep, indicating a higher density as well.

Therefore, the statement 'The steeper slope (green line) indicates a higher density' is correct.

Answer:

The boats are  934.65 feet apart

Explanation:

Given:

The angles of depression to the two boats are 42 degrees and 29 degrees

Height of the observation deck i =  1,353 feet

To Find:

How far apart are the boats (y )= ?

Solution:

Step 1 : Finding the value of x(Refer the figure attached)

We can use the tangent ratio to find the x value

[tex]tan(42^{\circ}) = \frac{1353}{x}[/tex]

[tex]x = \frac{1353}{tan(42^{\circ}) }[/tex]

x = 590.47 feet

Step 2 : Finding the value of  z (Refer the figure attached)

[tex]tan(29^{\circ}) = \frac{1353}{z }[/tex]

[tex]z = \frac{1353}{tan(29^{\circ})}[/tex]

z = 1525.12  feet

Step 3 : Finding the value of  y (Refer the figure attached)

y =  z -x

y = 1525.12 - 590.47

y = 934.65 feet

Thus the two boats are 934.65 feet apart

Answer:

The position of the image = 7.2 cm.

Explanation:

Given:

A Converging lens:

Object distance [tex](d_o)[/tex] = 12 cm = -12 cm (sign convention)

Focal length [tex](f)[/tex] = 18 cm

We have to find the position of the image.

Let the position of the image be [tex](d_i)[/tex] .

Sign convention:

The focal length of converging (convex) lens is always positive,while object distance is negative.

Using lens formula:

⇒ [tex]\frac{1}{object\ distance} + \frac{1}{image\ distance} =\frac{1}{focal\ length}[/tex]

⇒ [tex]\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f}[/tex]

⇒ [tex]\frac{1}{d_i} =\frac{1}{f} - \frac{1}{d_o}[/tex]

⇒ [tex]\frac{1}{d_i} =\frac{1}{f} - \frac{1}{-d_o}[/tex]

⇒ [tex]\frac{1}{d_i} =\frac{1}{f} + \frac{1}{d_o}[/tex]

⇒ [tex]d_i=\frac{d_o\times f}{d_o+f}[/tex]

⇒  [tex]d_i=\frac{12\times 18}{12+18}[/tex]

⇒ [tex]d_i=\frac{216}{30}[/tex]

⇒ [tex]d_i=7.2[/tex] cm

So the position of the image = 7.2 cm.

Answer:

Pressure applied by the man= 285103.125 [tex]Pa[/tex]  or 41.35 [tex]lb/in^{2}[/tex]

Explanation:

Pressure is defined as the perpendicular force applied per unit area.

i.e.  [tex]Pressure=\frac{Force}{Area}[/tex]

Now, [tex]Force= mg[/tex]

where, [tex]m[/tex] = mass of the body(man) = 93 kg

[tex]g[/tex] = acceleration due to gravity of Earth = 9.81 [tex]m/{s^{2}}[/tex]

[tex]Area[/tex] covered is equal to the area of both stilts(a man generally stands on two feet)

therefore [tex]Area=2(0.04)^{2}[/tex] [tex]m^{2}[/tex]

and putting in the values, we get,

[tex]Pressure=\frac{93\times9.81}{2\times(0.04)^{2}}Nm^{-2}=285103.125Nm^{-2}[/tex]

Now we need to convert to our required units:

[tex]1Nm^{-2}=1Pa\\1Pa=0.000145038lb/in^{2}[/tex]

(We can get the above result by individually converting kg to lb and meters to inches respectively)

Using the above relations we get,

[tex]Pressure=285103.125Pa=0.000145038\times285103.125lb/in^{2}=41.35lb/in^{2}[/tex]

Based on the formula for pressure, the pressure applied on the ground is 570206.25 N/m² or 82.7 pound per square inch

Pressure is defined as the perpendicular force applied per unit area.

Also,

where,

mass of the body = 93 kg

g = 9.81 m/s²

Force = 93 * 9,81

Force = 912.33 N

Area of square stilt = (0.04m)²

Area = 1.6 * 10⁻³ m²

Then;

Pressure = 912.33 N/1.6 * 10⁻³ m²

Pressure = 570206.25 N/m²

Converting to pounds per square inch:

1 pound per square inch = 6894.76 N/m²

570206.25 N/m² = 570206.25 N/m² * 1 pound per square inch/6894.76 N/m²

Pressure = 82.7 pound per square inch

Learn more about pressure at: https://brainly.com/question/25736513

Answer:

1). the sun at the center, with the earth and other planets orbiting the sun.

Explanation:

Newton believes that it's gravity between the sun and the other planets even at the large distances that cause them to orbit around the sun. This force build up by the masses of the sun and the planets which keeps the planets in their orbit.

Answer:the sun at the center, with the earth and other planets orbiting the sun.

Explanation:

The answer is Kevin's weight may change between Planet X and Planet Y.

Explanation:

Answer:

the answer is A

Explanation:

A. 0 N is the net force acting on the box

Explanation:

Answer:

Power = 30 [watts]

Explanation:

Initia data:

F = force = 30[N]

d = displacement = 2 [m]

By definition we know that work is equal to the product of force by the distance displaced

Therefore:

W = F * d = 30 * 2

W = 60 [J]

And power is defined as the amount of work done in a given time interval

time = t = 2 [sec]

Power = W / t

Power = 60 / 2

Power = 30 [W]

Answer:

YES THERE WILL BE A DIFFERENCE

Explanation:

THE THERMOMETER WHICH IS KEPT UNDER SUNLIGHT WILL BREAK DUE TO THE HEAT OF THE SUN

AND THE ONE KEPT UNDER SHADE WILL BE SAFE.

Final answer:

Yes, there will likely be a difference in temperature between a thermometer placed in direct sunlight and one placed in the shade due to the energy carried by sunlight that converts to heat when absorbed.

Explanation:

If a student places one thermometer in direct sunlight and another in the shade and records the temperatures over a period of one week, yes, there will likely be a difference in temperature readings between the two locations. Direct sunlight warms the surface it strikes more than an area in the shade does. This is due to the fact that sunlight carries energy which converts to heat when it is absorbed by objects, including thermometers. If the thermometer in the shade is shielded from this direct infusion of solar energy, it will generally record a lower temperature.

Several experiments suggested, such as shielding a thermometer with aluminum foil, wrapping it with a handkerchief soaked in nail polish remover, or simply measuring the air temperature in a sunny spot, all showcase the effects of sunlight on temperature readings. It is important to use an appropriate laboratory thermometer that can handle specific temperature ranges to avoid breakage and ensure accurate results. Additionally, when conducting the experiment, it is vital to ensure that the thermometer is upright to avoid incorrect readings.