h(x)= 6-3x when x=-1/4

y = –4x + 33

y-33 = –4x

y-33/4 = x

X=y-33/4.

Answer: The answer to your question is (8.25, 0)

Step-by-step explanation:

Answer:

2 hours

Step-by-step explanation:

Given in the question that,

speed of Aja = 3 miles/h

speed of Pete  = 4 miles/h

we know that Aja is 2 miles away from Pete  

Both will have covered same distance at the time they will catch up.

suppose time = x

               distance covered = y

Formula to use

distance = speed x time

Equation 1

3x  = y - 2

3x + 2 = y

Equation 2

4x = y

Equate both equation

3x + 2 = 4x

2 = 4x -3x

2 = x

Answer:

Pete will catch up Aja after 2 hours

Step-by-step explanation:

We can represent thsi problem as as system of equations.

Let

x =  be the time in which both Aja and Pete starte biking, (in hours)

y = the number of miles traveled by each

Aja begins 2 miles ahead of Pete and bikes at an average speed of 3 miles per hour. This means

y_Aja =  3*x + 2

Pete bikes at an average speed of 4 miles per hour.

y_Pete =  4*x

Then, we can find the intersection point between the graphs, so we find the solution.

Please see attached picture below

Pete will catch up Aja after 2 hours

To simplify the expression (6.15x+0.24y)">">1.5 + 5.9x - 1.6y, divide the terms in the parenthesis by 1.5 and then combine like terms to yield the simplified expression 10.0x - 1.44y.

To simplify the expression (6.15x+0.24y)">">1.5 + 5.9x - 1.6y, first, divide the terms within the parenthesis by 1.5. This action distributes the division across each term:

This simplifies to:

Now, combine like terms with those outside the parenthesis:

Therefore, the simplified expression is:

10.0x - 1.44y

Answer:

C) 4ft3

Step-by-step explanation:

volume is measured in cubes and cubes are to the 3rd power

Answer: The smallest angle x is 75.5

Step-by-step explanation:

3x+x+58=360

4x=360-58

4x=302

x=302/4

x=75.5

Answer:

General equation of line : [tex]y = mx+c[/tex]   --1

Where m is the slope or unit rate

Table 1)

p    d

1      3

2     6

4     12

d = Number of dollars (i.e.y axis)

p = number of pound(i.e. x axis)

First find the slope

First calculate the slope of given points

[tex]m = \frac{y_2-y_1}{x_2-x_1}[/tex]   ---A

[tex](x_1,y_1)=(1,3)[/tex]

[tex](x_2,y_2)=(2,6)[/tex]

Substitute values in A

[tex]m = \frac{6-3}{2-1}[/tex]

[tex]m = 3[/tex]

Thus the unit rate is 3 dollars per pound.

So, It matches the box 1 (Refer the attached figure)

Equation 1 : [tex]p=3d[/tex]

[tex]\frac{p}{3}=d[/tex]

Since p is the x coordinate and d is the y coordinate

On Comparing with 1

[tex]m = \frac{1}{3}[/tex]

Thus the unit rate is [tex]\frac{1}{3}[/tex] dollars per pound

So, It matches the box 2 (Refer the attached figure)

Equation 2 : [tex]\frac{1}{3}d=3p[/tex]

[tex]d=9p[/tex]

Since p is the x coordinate and d is the y coordinate

On Comparing with 1

[tex]m =9[/tex]

Thus the unit rate is 9 dollars per pound

So, It matches the box 3 (Refer the attached figure)

Table 2)

p        d

1/9      1

1         9

2        18

d = Number of dollars (i.e.y axis)

p = number of pound(i.e. x axis)

[tex](x_1,y_1)=(\frac{1}{9},1)[/tex]

[tex](x_2,y_2)=(1,9)[/tex]

Substitute values in A

[tex]m = \frac{9-1}{1-\frac{1}{9}}[/tex]

[tex]m = \frac{8}{frac{8}{9}}[/tex]

[tex]m = 9[/tex]

Thus the unit rate is 9 dollars per pound

So, It matches the box 3 (Refer the attached figure)

Answer: See image attached

Step-by-step explanation:

The answer is 0.6 . 3 divide 5 is 0.6

.6 is correct . To get that u just divide the 3 by the 5

Answer:

A

Step-by-step explanation:

The equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = 5x + 2 ← is in slope- intercept form

with slope m = 5

• Parallel lines have equal slopes, hence

y = 5x + c ← is the partial equation of the parallel line

To find c substitute (- 6, - 1) into the partial equation

- 1 = - 30 + c ⇒ c = - 1 + 30 = 29

y = 5x + 29 → A

Answer:

99 cm^2

Step-by-step explanation:

Solution 1: Don't decompose and instead use the trapeziod area theorem. (b1+b2)/2 * h. Using this we plug in the two bases and get (23+10)/2 *6 -->

16.5*6=99cm2

Solution 2: You follow the rules and decompose the trapeziod. Split it into two triangles and a rectangle. The area of the triangle on the left is (b*h)/2 which is equal to (3*6)/2 which is 9 cm2. Spliting the trapeziod gives the rectangle dimensions of 10x6. 10*6= 60cm2. Finally we must find the area of the triangle on the right. The height is 6cm in the diagram and the base would be the full base of the trapeziod(20+3)-(10+3) --> 23-13=10. Using the area formula for the triangle gives us 10*6/2 = 30cm2. To find the full area we must add all the shapes up, 9+60+30 = 99cm2

The answer is:

The area of the base of the pyramid is:

[tex]BaseArea=108mm^{2}[/tex]

We are given the volume and the height of the hexagonal pyramid, so, to calculate the base of the area, we need to use the following formula:

[tex]Volume=\frac{1}{3}*BaseArea*Height[/tex]

So, we are given the following information:

[tex]Volume=144mm^{3}\\\\Height=4mm[/tex]

Then, substituting the given information and isolating the base area, we have:

[tex]Volume=\frac{1}{3}*BaseArea*Height[/tex]

[tex]144mm^{3} =\frac{1}{3}*BaseArea*4mm\\\\144mm^{3}*\frac{3}{4mm}=BaseArea\\\\BaseArea=108mm^{2}[/tex]

Hence, the area of the base of the hexagonal pyramid is equal to:

[tex]BaseArea=108mm^{2}[/tex]

Have a nice day!

Answer:

11.2 feet

Step-by-step explanation:

The width of the actual train car, to the nearest foot, is 11 feet.

To find the width of the actual train car, we need to use the scale factor provided.

Given:

- Width of the model train's car = 2.4 inches

- Scale = 1:56

To find the actual width, we'll use the scale factor:

[tex]\[ \text{Actual width} = \text{Model width} \times \text{Scale factor} \][/tex]

First, we need to convert the width of the model train's car from inches to feet because the scale factor is given as a ratio. There are 12 inches in a foot.

[tex]\[ \text{Model width} = \frac{2.4 \text{ inches}}{12 \text{ inches/foot}} = 0.2 \text{ feet} \][/tex]

Now, we can find the actual width:

[tex]\[ \text{Actual width} = 0.2 \text{ feet} \times 56 = 11.2 \text{ feet} \][/tex]

Answer:

[tex]48\ pieces[/tex]

Step-by-step explanation:

we know that

To find how many pieces can be made from the pipe, divide the total length of the pipe by 3/4 feet

so

[tex]\frac{36}{(3/4)} =\frac{36*4}{3}=48\ pieces[/tex]

Answer:

Dot Plot

Step-by-step explanation:

Just start marking off the numbers from left to right until you get to the middle.

Answer:

2/6

Step-by-step explanation:

There are 6 sides, and two are green. That makes it 2/6

Answer:

2/6

Step-by-step explanation:

Answer:

-1/3

Step-by-step explanation:

To find the slope you have to find the rise over run. Start at the first point then  go down 3 and over to the right 1. Your slope is -1/3.

Answer:

A

Step-by-step explanation:

Calculate the slope m using the slope formula

m = (y₂ - y₁ ) / (x₂ - x₁ )

with (x₁, y₁ ) = (1, 4) and (x₂, y₂ ) = (2, 1) ← 2 points on the line

m = [tex]\frac{1-4}{2-1}[/tex] = [tex]\frac{-3}{1}[/tex] = - 3 → A

Answer:

450pi

Step-by-step explanation:

The volume of this figure is just the sum of the volumes of two cones. They both have radius of 5 and one has a height of 7 and the other has a height of 11.

The easiest way (for me) to calculate the volume is to find the average of the heights (9) and multiply the volume of a cone with the same radius as the other two and the other height by two.

The volume for a cone is just (pi*r^2*h)/3, so the 'average' cone's volume is 25pi * 9/3 or 75pi.

Double this to get 150pi.

Alternatively, you could calculate the volumes of the two cones using separate heights, but here you will end up with non-whole numbers (times pi) for both cones if you use that method.

Answer:

471.24 in³

Step-by-step explanation:

Volume of the left cone

= 1/3 π (5)²(7)

= 175π/3 in³

Volume of the right cone

= 1/3 π(5)²(11)

= 275π/3 in³

Total volume

= 175π/3 + 275π/3  

= 150π

= 471.24 in³

Answer:

120°

Step-by-step explanation:

Answer:

D

Step-by-step explanation:

Given

11x = 11 - 55xz²

Collect the terms in x together by adding 55xz² to both sides

11x + 55xz² = 11 ← factor out x on the left side

x(11 + 55z²) == 11 ← divide both sides by 11 + 55z²

x = [tex]\frac{11}{11+55z^2}[/tex] ← factor out 11 on the denominator

x = [tex]\frac{11}{11(1+5z^2)}[/tex] ← cancel 11 on numerator/denominator

x = [tex]\frac{1}{1+5z^2}[/tex] → D

Answer:

y-1/3x=17/3

Step-by-step explanation:

ax+by=c is standard form

first I'll start with slope interecept form and then we can change it to standard

y=mx+b

y=1/3x+b

4=1/3(-5)+b

4=-5/3+b

12/3+5/3=b

17/3=b

y=1/3x+17/3

to change to standard

y-1/3x=17/3

The equation of the circle is (x - 1)^2 + (y - 2)^2 = 17.

The equation of a circle can be written in the form:

(x - h)2 + (y - k)2 = r2

Where (h, k) is the center of the circle and r is the radius.

In this case, the center of the circle is (1, 2) and it passes through the point (0, 6).

So, the distance between the center and the point is equal to the radius of the circle.

Using the distance formula, we can find the radius:

r = sqrt((0 - 1)2 + (6 - 2)2) = sqrt(1 + 16) = sqrt(17)

Therefore, the equation of the circle is:

(x - 1)2 + (y - 2)2 = 17

Answer:

1296.85 ft

Step-by-step explanation:

Answer:

The maximum distance riders travel in one full ride is:

                        1296.192 feet

Step-by-step explanation:

It is given that the diameter(d) of carousel is: 32 feet.

This means that the distance travelled in one revolution is equal to the circumference(C) of the circle.

We know that the circumference of circle is given by:

[tex]C=\pi\times d\\\\\\C=3.14\times 32\\\\\\C=100.48\ feet[/tex]

Also, Time of one full ride is:  3 minutes.

Speed of one full ride is: 4.3 revolutions per minute.

This means that the number of revolutions made is calculated as:

Number of revolution=Speed×Time

Number of revolution=4.3×3=12.9 revolutions.

Hence, total distance traveled in one full ride is:

Number of revolution made×Distance covered in one revolution

=  12.9×100.48

= 1296.192 feet

Answer:

will i dont know if this i right but there are 7 sets on the data table that has 2 1/4 on it so i hope this help i am not shore though the answer is 7

Step-by-step explanation:

The answer would be 7

Answer:

It's 0.90.

Step-by-step explanation:

Answer:

the answer is B

Step-by-step explanation:

(Table) Answer:

rice and chicken=20

rice and beef=10

total rice= 30

pasta and chicken=40

pasta and beef=30

total pasta=70

total chicken=60

total beef=40

total total=100

Answer:

If x=0, then f(0) = -15

If f(x) = 27, then x = 3

Step-by-step explanation:

Find where the x column on the table has a 0 and find the corresponding f(x) value which is -15.

Do then same for the other question but find where f(x) on the table is equal to 27 and find the corresponding x value which is 3

If x=0, then f(0) =  -15

If f(x) = 27, then x =  3

We are given a table of values as follows:

             x              f(x)

             -3              33

             -2              17  

              0              -15

              2               -7

              3               27

This means that x is the independent variable and f(x) is the dependent variable corresponding to the variable x.

Hence, from the table of values we have:

If x=0, then f(0) =  -15

If f(x) = 27, then x =  3

Luke's square mosaic increased in area by 3.25 square meters after he added a border, turning the side length from 3 meters to 3.5 meters.

Luke originally made a square mosaic with side lengths of three meters. The area of this original square is calculated by squaring the side length: 3 meters × 3 meters = 9 square meters. When Luke added a border to his mosaic, the side length became 3.5 meters. Calculating the new area, we square the new side length: 3.5 meters × 3.5 meters = 12.25 square meters.

The increase in the area of the mosaic is the difference between the new area and the original area, which is 12.25 square meters - 9 square meters = 3.25 square meters. Therefore, the area of Luke's mosaic has increased by 3.25 square meters after adding the border.

Answer:

819

Step-by-step explanation:

Givens

Formula

Sum = a(1 - r^n) / ( 1 - r)

Sum = -1(1 - (-4)^6 / (1 - -4)

Sum = -1 (1 - 4096) / 5

Sum = -1 (- 4095 ) / 5

Sum = 819

Answer:

7

Step-by-step explanation:

The wording of this question is ambiguous, but 7 * 7 = 49, at least that's my reasoning.

Answer:

Step-by-step explanation: 7 and -7 i learned about it the other day but i’m almost positive it’s -7

Answer:

If 10 minutes block, then it can be rented for 20 minutes. If no blocks, then 27.27 minutes

Step-by-step explanation:

Initial setup cost is $6.

Every 10 minutes, $5.5 is charges, so each minute  [tex]\frac{5.5}{10}=0.55[/tex] is charged.

Let time used be t, so we can set up an equation as:

21 = 6 + 0.55t

Where t is in minutes

we solve for t to find out how many minutes we can rent for $21:

[tex]21 = 6 + 0.55t\\21-6=0.55t\\15=0.55t\\t=\frac{15}{0.55}=27.27[/tex]

since it is charged PER 10 MINUTES, so we can rent it for 10, 20 , 30 minutes etc.

WE CANNOT RENT FOR 30 minutes as we dont have enough money (only for fractional amount of a little over 27 minutes). Thus, we will have to have some money left over and rent for 20 minutes.

For $21, you can rent approximately 20 minutes of time at the local copy center when there's a $6 setup charge and each 10-minute period costs an additional $5.50.

The question is asking how much time can be rented for $21 at a local copy center, where there's a $6 setup charge and an additional $5.50 for every 10 minutes. To figure this out, we first need to subtract the setup charge from the total amount of money that can be spent. So, $21 - $6 = $15. Next, we need to see how many 10 minute increments can be rented with $15. Since each 10 minute increment costs $5.50, we divide $15 by $5.50 to get approximately 2.72. Since we can't rent time in fractions of a minute, we round this down to 2. Therefore, we can rent about 20 minutes of time for $21.

https://brainly.com/question/34407434

#SPJ11

Answer:

a = 0

b = 2

Step-by-step explanation:

Synthetic division gives rise to two equations:

b -2a = 2

b +2a = 2

The solution to these equations is (a, b) = (0, 2).

___

The remainder from the division is the lower-right sum shown in the attached tables. For the factor x+2, the remainder from dividing your cubic by x+2 is (4b-8a-8). Setting this to zero and putting it into standard form gives the first equation shown above.

The remainder from division by (x-2) is (4b+8a-4). Setting this to 4 and putting the result into standard form gives the second equation above.

___

Pen skips and chocolate smudges make the first attachment less "professional" than it might otherwise be. Please forgive. The graph in the second attachment verifies this result.