Answer:
[tex]\boxed{\text{12 p, 12 n, and 12 e}}[/tex]
Explanation:
No atoms of Mg have a mass of 24.3050 u. That is the average mass of all the isotopes of Mg.
However, the most common isotope of Mg is ₁₂²⁴Mg (mass = 23.99 u)
The atomic number of Mg is 12. It has 12 protons.
The atomic mass of ²⁴Mg is 24. That's the total number of protons and neutrons.
p + n = 24
12 + n = 24
n = 12
An atom of ²⁴Mg has 12 neutrons.
If the atom is neutral, the number of electrons equals the number of protons.
e = p = 12
[tex]\text{An atom of }$^{24}$\text{Mg contains }\boxed{\textbf{12 p, 12 n, and 12 e}}[/tex]
Top answer
it seems most correct
Given 6193 mL of a gas at 62.3 °C. What is its volume at 38.1 °C?
Answer:
5746.0 mL.
Explanation:
We can use the general law of ideal gas: PV = nRT.
where, P is the pressure of the gas in atm.
V is the volume of the gas in L.
n is the no. of moles of the gas in mol.
R is the general gas constant,
T is the temperature of the gas in K.
If n and P are constant, and have two different values of V and T:
V₁T₂ = V₂T₁
V₁ = 6193.0 mL, T₁ = 62.3°C + 273 = 335.3 K.
V₂ = ??? mL, T₂ = 38.1°C + 273 = 311.1 K.
∴ V₂ = V₁T₂/T₁ = (6193.0 mL)(311.1 K)/(335.3 K) = 5746.0 mL.
Which title is most appropriate for this table?
A: uses of functional groups involving oxygen
B: Natural sources of functional groups involving oxygen
C: Uses of functional groups involving halides and amines
D: Natural sources of functional groups involving halides and amines
a.uses of functional groups involving oxygen
Answer : The correct option is, (A) uses of functional groups involving oxygen.
Explanation :
(1) [tex]R-OH[/tex] : It belongs to an alcoholic functional group in which the the [tex]-OH[/tex] group is directly attached to the alkyl group of carbon.
(2) [tex]R-O-R^'[/tex] : It belongs to an ether functional group in which the the oxygen is directly attached to the two alkyl group of carbon.
(3) [tex]R-CO-R^'[/tex] : It belongs to ketone functional group in which the the [tex]-CO[/tex] group is directly attached to the two alkyl group of carbon.
(4) [tex]R-CHO[/tex] : It belongs to an aldehyde functional group in which the the [tex]-CHO[/tex] group is directly attached to the alkyl group of carbon.
(5) [tex]R-COOH[/tex] : It belongs to carboxylic acid functional group in which the the [tex]-COOH[/tex] group is directly attached to the alkyl group of carbon.
(6) [tex]R-COO-R^'[/tex] : It belongs to ester functional group in which the the [tex]-COO[/tex] group is directly attached to the two alkyl group of carbon.
[tex]R-NH_2[/tex] : It belongs to an amine functional group in which the the [tex]-NH_2[/tex] group is directly attached to the alkyl group of carbon.
[tex]R-X[/tex] : It belongs to halide functional group in which the the [tex]-X[/tex] group (all the halogens) is directly attached to the alkyl group of carbon.
From the above and from the question we conclude that, some uses of functional groups are given in which the an oxygen are present in all the functional groups.
Hence, the correct option is, (A) uses of functional groups involving oxygen.
A scientist is sitting in her living room and hears the wind rushing past her front door.
Based on her knowledge of Bernoulli's principle, what does the scientist know even without opening the door?
The air outside has less volume than the air inside.
There is less air pressure outside the door than inside the door.
The air outside has more mass than the air inside.
There is more air pressure outside the door than inside the door.
I think the second choice but I might be wrong
Answer:
B
Explanation:
There is less air pressure outside the door than inside the door.
Gregor Mendel used pea plants that were heterozygous for each of two traits
Answer:
Explanation:
C
if mars is located an average of 228 million km from earth, and radio waves travel at 300,000 km/s, how many minutes does it take a communication to reach earth from mars ?
It takes approximately 12.67 minutes for a communication to travel from Mars to Earth, calculated by dividing the average distance of 228 million km by the speed of light (300,000 km/s) and then converting the time from seconds to minutes.
Explanation:To calculate the time it takes for a communication to reach Earth from Mars, you can use the formula for the speed of light:
Time = Distance / Speed. With Mars being an average of 228 million km away from Earth and radio waves traveling at the speed of light, which is approximately 300,000 km/s, you can compute the time in seconds and then convert the result into minutes.
First, find the time in seconds:
Time = 228,000,000 km / 300,000 km/s = 760 seconds.
Then, convert seconds into minutes:
Time = 760 s / 60 s/min = 12.67 minutes.
Therefore, it takes approximately 12.67 minutes for a communication to reach Earth from Mars.
Learn more about Communication Time from Mars to Earth here:https://brainly.com/question/31420377
#SPJ2
calculate the molarity of a solution if there are 1.5 mol of NaCl in 2.3 L of solution
Answer:
Molarity≅0.6522 mol/L
Explanation:
The solutions are homogeneous mixtures (that is, their properties and composition are uniform) of two or more substances. The substance that is in greater proportion is called solvent, and the substance or substances that are in a smaller proportion, solute.
The mole is an International Unit used to measure the amount of a substance.
Molarity (M) or Molar Concentration is the number of moles of solute that are dissolved in a given volume of solution. It is expressed in the units (moles / liter).
[tex]Molarity=\frac{number of moles of solute}{solution volume}[/tex]
In this case, the solute is NaCl,and you know:
number of moles of solute: 1.5 molsolution volume: 2.3 LThen:
[tex]Molarity=\frac{1.5 mol}{2.3 L}[/tex]
Molarity≅0.6522 mol/L
The molarity of a solution if there are 1.5 mol of NaCl in 2.3 L of solution is 0.652M
HOW TO CALCULATE MOLARITY:The molarity of a solution can be calculated by dividing the number of moles in the solution by its volume. That is;Molarity = no. of moles (n) ÷ volume (L)
According to this question, there are 1.5 moles of NaCl in 2.3L of solution. The molarity can be calculated as follows:Molarity = 1.5mol ÷ 2.3L
Molarity = 0.652M
Therefore, the molarity of a solution if there are 1.5 mol of NaCl in 2.3 L of solution is 0.652M.
Learn more about molarity at: https://brainly.com/question/12127540
What is the balanced equation for Fe+O2—->Fe3O4
Answer:
3Fe2O2---> Fe3O4
Explanation:
You need to add three to the left side to make it equal to the one on the right, and add a 2 since you can't change the subscripts
Answer:
The balanced chemical reaction is:
[tex]3Fe+2O_2\rightarrow Fe_3O_4[/tex]
Explanation:
Balanced chemical reaction : It is defined as the reaction in which the number of atoms of individual elements present on reactant side must be equal to the product side.
While balancing the chemical equation balance all the atoms of elements except oxygen atom which will be done in the last.
[tex]Fe+O_2\rightarrow Fe_3O_4[/tex]
Step 1: Write three in front of iron;
[tex]3Fe+O_2\rightarrow Fe_3O_4[/tex]
Step 2: Now write two in front of oxygen gas;
[tex]3Fe+2O_2\rightarrow Fe_3O_4[/tex]
The balanced chemical reaction is:
[tex]3Fe+2O_2\rightarrow Fe_3O_4[/tex]
According to reaction, 3 moles of iron reacts with 2 moles of oxygen gas to give 1 mole of ferric oxide.
What is the correct order of steps for the students to take?
Answer:
B.
Explanation:
Need help will
Give 55 points
D, L, A, L,?, j, b, ,, ,, ,,
Answer: um nose
Explanation:
What is the balanced equation for Al+FeN2>AlN+Fe
Answer:2 AL + FEN2 = 2 ALN + FE
Explanation: AL might be an improperly capitalized: Al. One of your compounds is AL (A and L). Did you mean Al (aluminum)?
FEN2 might be an improperly capitalized: FeN2. ALN might be an improperly capitalized: AlN
FE might be an improperly capitalized: Fe
In a solution with a pH of 4, the [OH-] is:
1x 10-10
1x 10-4
10
- 1x 10-8
For a solution with a pH of 4, the hydroxide ion concentration [OH-] is calculated by subtracting the pH from 14 to get the pOH, and then finding 10^-pOH, resulting in [OH-] = 1 x 10⁻¹⁰ M.
So, the correct answer is option 1) 1 x 10⁻¹⁰.
Explanation:The question resolves around finding the hydroxide ion concentration ([OH-]) in a solution with a specific pH. To calculate the [OH-] for a solution with a pH of 4, we use the relationship where the sum of the pH and pOH equals 14. First, we find the pOH by subtracting the given pH from 14:
pOH = 14 - pH = 14 - 4 = 10.
Then, we use the pOH to determine the hydroxide ion concentration:
[OH-] = 10^-pOH[OH-] = 10⁻¹⁰The [OH-] in a solution with a pH of 4 is therefore 1 x 10⁻¹⁰ M.
So, the correct answer is option 1) 1 x 10⁻¹⁰.
What is the percent by mass of oxygen in carbon dioxide (CO2)?
Use
%ELEMENT=TOTAL MASS OF ELEMENT IN COMPOUND/MOLAR MASS OF COMPOUND -X100
27.29%
57.12%
72.71%
79.99%
Answer:
= 72.73%
Explanation:
The percentage by mass of an element is given by;
% element = total mass of element in compounds/molar mass of compound × 100
The mass of oxygen in carbon dioxide = 32 g
Molar mass of CO2 = 44 g
Therefore;
% of O2 = 32/44 × 100%
= 72.73%
Answer:
C
Explanation:
72.71%
A sample of helium gas in a balloon is compressed from 4.0 L to 3.2 L at a constant temperature. If the pressure of the gas in the 4.0 L volume is 229 kPa, what will the new pressure?
Answer:
286 kPa
Explanation:
Boyles law states that volume of gas is inversely proportional to pressure o gas for a fixed amount of gas at constant temperature
P1V1 = P2V2
where P1 is pressure and V1 is volume at first instance
P2 is pressure and V2 is volume at the second instance
substituting the values in the equation
229 kPa x 4.0 L = P2 x 3.2 L
P2 = 286.25 kPa
the new pressure is 286 kPa
Calculate the mass percent of calcium chloride in 8.87 g of calcium chloride in 65.1 g of water
Answer:
11.99 % ≅ 12.0%.
Explanation:
∵ mass % = [mass of solute/mass of solution] x 100.
mass of solute (CaCl₂) = 8.87 g & mass of solution = 8.87 g + 65.1 g = 73.97 g.
∴ mass % of (CaCl₂) = [mass of solute/mass of solution] x 100 = ( 8.87 g/ 73.97 g) x 100 = 11.99 % ≅ 12.0%.
How do you write 145,000,000 in scientific notation?
Answer:
[tex]\boxed{1.45 \times 10^{8}}[/tex]
Explanation:
A number in scientific notation has the form N × 10ⁿ
where N is a decimal number called the mantissa and n is an integer called the exponent.
We must have 1 ≤ N < 10
Step 1. Determine the mantissa
Move the decimal place to the left to create a new number between 1 and 10.
145 000 000 ⟶ 1.450 000 00; N = 1.45
Step 2. Determine the exponent.
The exponent is the number of times you moved the decimal to get the mantissa.
You moved the decimal eight places to the left, so the exponent n = 8.
Step 3. Write the number in scientific notation
The number in scientific notation is [tex]\boxed{1.45 \times 10^{8}}[/tex].
Need help in this problems
Answer:
Q1: 2.068 atm.
Q2: 0.7346 atm.
Q3: 336.7 mm Hg.
Q4: 393.7 K = 120.7 °C.
Q5: 694.1 mm Hg.
Q6: 397.1 K.
Q7: 676.5 mm Hg.
Q8: 72.68 kPa.
Explanation:
Gay-Lussac's law states that the pressure of a given mass of gas varies directly with the absolute temperature of the gas (K), when the volume is kept constant.It can be written as: P/T = constant.So, for two different T and P we can express the relation as:P₁T₂ = P₂T₁.
Q1:
P₁ = 2.0 atm, T₁ = 20.0°C + 273 = 293 K.
P₂ = ??? atm, T₂ = 30.0°C + 273 = 303 K.
∴ P₂ = P₁T₂/T₁ = (2.0 atm)(303 K)/(293 K) = 2.068 atm.
Q2:
P₁ = 0.55 atm, T₁ = 25.0°C + 273 = 298 K.
P₂ = ??? atm, T₂ = 125.0°C + 273 = 398 K.
∴ P₂ = P₁T₂/T₁ = (0.55 atm)(398 K)/(298 K) = 0.7346 atm.
Q3:
P₁ = 87.0 mm Hg, T₁ = 77.0 K.
P₂ = ??? atm, T₂ = 25.0°C + 273 = 298.0 K.
∴ P₂ = P₁T₂/T₁ = (87.0 mm Hg)(298 K)/(77 K) = 336.7 mm Hg.
Q4:
P₁ = 248.0 kPa, T₁ = 10.0°C + 273 = 283 K.
P₂ = 345.0 kPa, T₂ = ??? K.
∴ T₂ = P₂T₁/P₁ = (345.0 kPa)(283 K)/(248.0 kPa) = 393.7 K - 273 = 120.7 °C.
Q5:
P₁ = 750.0 mm Hg, T₁ = 22.0°C + 273 = 295 K.
P₂ = ??? mm Hg, T₂ = 0.0°C + 273 = 273 K.
∴ P₂ = P₁T₂/T₁ = (750.0 mm Hg)(273 K)/(295 K) = 694.1 mm Hg.
Q6:
P₁ = 599.0 mm Hg, T₁ = 40.0°C + 273 = 313 K.
P₂ = 760.0 mm Hg, T₂ = ??? K.
∴ T₂ = P₂T₁/P₁ = (760.0 mm Hg)(313 K)/(599 mm Hg) = 397.1 K.
Q7:
P₁ = 800.0 mm Hg, T₁ = 323 K.
P₂ = ??? mm Hg, T₂ = 273.15 K.
∴ P₂ = P₁T₂/T₁ = (800.0 mm Hg)(273.15 K)/(323 K) = 676.5 mm Hg.
Q8:
P₁ = 30.0 kPa, T₁ = - 150.0°C + 273 = 123 K.
P₂ = ??? kPa, T₂ = 25.0°C + 273 = 298 K.
∴ P₂ = P₁T₂/T₁ = (30.0 kPa)(298 K)/(123 K) = 72.68 kPa.
Which term names the main class of the chemical that makes up bread.
Answer:
yeast
Explanation:
What is one similarity between the lungs and capillaries? (5 points) They are both activated by inhalation. They are both involved in gas exchanges. They are both part of the circulatory system. They are both regulated by the heart.
Answer:
They are both involved in gas exchanges.
Explanation:
This is the answer because:
1) Gas exchange takes place in the millions of alveoli in the lungs and the capillaries that envelop them. Inhaled oxygen moves from the alveoli to the blood in the capillaries, and carbon dioxide moves from the blood in the capillaries to the air in the alveoli.
2) Also, capillaries are located inside the lungs. Therefore, whenever we breathe in air we exchange gasses.
Hope this helps! :D
One similarity between the lungs and capillaries is that they are both involved in gas exchanges.
What do you mean by Capillaries?Capillaries may be defined as a network of blood vessels that supplies blood as well as oxygen throughout the body.
Both the lungs and the capillaries are actively involved in the exchange of gases in and out of the body. The capillaries are connected to the walls of the alveoli where oxygen and carbon dioxide diffuse. Carbon dioxide is exhaled outside by the lungs, while the oxygen is attached to the RBCs and travels to the heart.
Therefore, one similarity between the lungs and capillaries is that they are both involved in gas exchanges.
To learn more about Gaseous exchanges, refer :
brainly.com/question/8606959
#SPJ2
in cement manufacturing industry the material calcium carbonate is decomposed to calcium oxide and carbon dioxide using high temperature however due to temperature distribution difference the raw material is not decomposed with one pass operationin the reactor. the recycle of unconverted raw material is needed and a portion of reactor out put is recycled. carbon dioxide is only removed from the reactor in one stream and the overall product is collected in the product stream. the feed flow rate is 10000kg/h and the overall conversion is in product stream assume that the mass flow rate ratio of the recycle stream to product stream is 0.1
the reaction is CaCo3 → CaO + Co2
a. determine the mass flow rates of gas stream and product stream
b.the mass fractions of the product stream
c.the mass flow rates of the product stream.
Bigtcuvpifyvipycrx txeZzerxtuciutesrc
if 2.0 g of hydrogen sulfide, H2S(g) reacts with 5.0 g of sodium hydroxide what mass of the excess reactant is present when the reaction is complete
Answer: iits 9.g
Explanation:
The planets closest to the Sun are the inner, or terrestrial, planets and are similar to Earth in some ways. They are rocky and dense, have few moons, no rings, and are relatively small. These planets also differ in many ways, as shown in the chart. For example, Venus is the hottest planet on the chart, even though Mercury is closer to the Sun. The temperature difference between Venus and Earth is significantly greater than the difference between Venus and Mercury, even though Venus lies close to midway between those two planets. Which statement elaborates on the cause of this wide range of temperatures between terrestrial planets? 45 POINTS!!!
A) The dense atmosphere of Venus traps the Sun's heat, known as the greenhouse effect, resulting in high temperatures.
B) The farther away from the Sun, the thinner a planet's atmosphere. Closer planets need more protection from the heat.
C) The temperature of Mars is so low because its atmosphere is mostly made of carbon dioxide, which does not trap heat well.
D) Venus is more than twice as large as Mercury, so it absorbs more of the Sun's heat, even though Mercury is closer to the Sun.
Answer:
B) The farther away from the Sun, the thinner a planet's atmosphere. Closer planets need more protection from the heat.
Explanation:
The planets closest to the Sun are the inner, or terrestrial, planets and are similar to Earth in some ways. They are rocky and dense, have few moons, no rings, and are relatively small. These planets also differ in many ways, as shown in the chart. For example, Venus is the hottest planet on the chart, even though Mercury is closer to the Sun. The temperature difference between Venus and Earth is significantly greater than the difference between Venus and Mercury, even though Venus lies close to midway between those two planets.
Answer:
[tex]\Huge \boxed{\mathrm{A}}[/tex]
Explanation:
The terrestrial planets are the planets closest to the Sun.
Venus is the hottest planet, the temperature on Venus is higher than the temperature on Mercury and Earth.
Venus has a thick dense atmosphere, composed of primarily carbon dioxide and clouds of sulfuric acid, that traps the Sun’s heat, resulting in high temperatures. The atmosphere of Venus is more denser than the atmosphere of Mercury and Earth.
How much does the density of water decrease when it is in a frozen state?
The density of water is decreases by about 9% when it is in a frozen state.
Water expands when it freezes because of the unique structure of the water molecule. Water molecules are polar, meaning that they have a positive and negative end. The positive end of one water molecule is attracted to the negative end of another water molecule, forming hydrogen bonds.
When water is in a liquid state, the hydrogen bonds are constantly breaking and reforming. This allows the water molecules to move around freely. However, when water freezes, the hydrogen bonds become more rigid and the water molecules form a crystalline structure. This structure is less dense than the liquid state, which is why ice expands when it freezes.
The hydrogen bonds in ice force the water molecules to be further apart than they are in liquid water. This is because the hydrogen bonds have a specific angle and length that they must be in order to be stable. As a result, the water molecules cannot pack as tightly together in ice as they can in liquid water.
The expansion of water when it freezes has a number of important implications. For example, it allows ice to float on water, which is essential for life in cold climates. It also helps to protect plants and animals from freezing damage.
To know more about density here
https://brainly.com/question/29775886
#SPJ12
In this illustration, the rings around the Sun represent
A)
orbits.
B)
sun rays.
C)
radiation.
D)
dust particles.
Answer:
Ok so its not dust particles i have proof i choose it and it was wrong but i have been working and the answer is sun rays i looked at images online and i found the same image so its sun rays i hope this helps.
In this illustration, the rings around the Sun represent sun rays. Sunlight, or radiation from the Sun, is a bundle of electromagnetic waves that range from infrared (IR) to ultraviolet rays (UV)
What are sun rays?Crepuscular rays are produced when sunlight passes through gaps in clouds and continues into an environment that contains dust and/or haze. They are also known as sun rays and sunbeams.
Sunlight, specifically infrared, visible, and ultraviolet light, is a type of electromagnetic radiation emitted by the Sun.
On Earth, sunlight is reflected and filtered by the atmosphere, and when the Sun is above the horizon, it is seen as daytime.
Sunlight, or radiation from the Sun, is a bundle of electromagnetic waves that range from infrared (IR) to ultraviolet rays (UV). The electromagnetic spectrum naturally includes visible light, which lies between IR and UV.
To learn more about sun rays, refer to the below link:
https://brainly.com/question/335235
# SPJ2
In ionic bonds what happens to electrons
A: nonmetals donate electrons to metals
B: nonmetals share electrons
C: metals donate electrons to non metals
Answer:
C: metals donate electrons to non metals
Explanation:
Answer : The correct option is, (C) metals donate electrons to non metals
Explanation :
Covalent compound : Covalent compounds are the compound in which the atoms are covalently bonded. The covalent bonds are formed by the equal sharing of the electrons and these bonds are formed between two non-metals.
Ionic compound : Ionic compounds are the compound in which atoms are bonded through the ionic bond. The ionic bonds are formed by the complete transfer of electrons. That means the bond is formed when the metals donate electrons to the non-metals.
These bonds are formed between one metal and one non-metal.
Hence, the correct option is, (C) metals donate electrons to non metals
which two body systems deliver oxygen to your cells and take away carbon dioxide
Body systems associated with gases(particularly that which was asked):
• Respiratory System.
• Cardiovascular System or Circulatory System or Vascular System.
Note: All these three are the names of the same thing i.e cardiovascular system, circulatory system and vascular system.
Why is helium less reactive than hydrogen?
A.
Each helium atom has four neutrons, but each hydrogen atom only has one neutron.
B.
Each helium atom has a full protonic power level, but each hydrogen atom only has one proton.
C.
Each helium atom has two electron energy levels, but each hydrogen atom only has one electron energy level.
D.
Each helium atom has a full valence electron shell, but each hydrogen atom only has one valence electron.
Answer:
D.
Each helium atom has a full valence electron shell, but each hydrogen atom only has one valence electron.
Explanation:
Atoms are made of protons, neutrons and electrons. Protons and neutrons are in the nucleus and electrons orbit in energy levels. Chemical properties of elements depend mostly on the number of electrons in the valence / outermost energy shell.
Elements that have an incomplete energy shell are more reactive as they try to gain a complete outer shell electron configuration either by losing electrons or gaining electrons from the valence energy shell.
He is a noble gas, which means it has a full valence electron shell therefore it is inert. H has one electron in the outer shell therefore its reactive by gaining or losing the outermost electron.
therefore H is more reactive than He as it has an incomplete valence electron shell.
PLEASE for the love of god answer these questions for me!!!! It’s urgent.
1. Some igneous rock forms from magma that cools slowly within Earth’s crust. Briefly describe the most likely crystallization and texture of the rock.
2. Other igneous rock forms from lava that cools quickly on Earth’s surface. Classify the rock as either intrusive or extrusive, and identify another word used to describe this type of rock.
3. You are studying a sample of igneous rock. The rock formed on the surface of Earth. It’s made mostly of light-colored minerals. The sample has just a few specks of dark-colored minerals. Classify the rock by type and composition.
4. You are studying a sample of igneous rock. The rock formed within Earth’s crust. The sample contains a very high concentration of dark-colored, high-density minerals. Classify the rock by type and composition.
5. A scientist shows you a sample of rock called gabbro. The scientist explains that gabbro is an intrusive mafic igneous rock. Explain what this means.
Igneous rocks that cool slowly inside the Earth's crust have coarse-grained textures. Rocks that cool quickly on the Earth's surface are called extrusive or volcanic. Extrusive rocks with primarily light-colored minerals are felsic, likely rhyolite, while intrusive rocks with dark, high-density minerals are mafic, possibly gabbro.
Explanation:1. When magma cools slowly within the Earth’s crust, it gives the crystals in the forming igneous rock time to grow, creating a coarse-grained texture often visible to the nake-d eye. This is known as phaneritic texture.
2. The rock that forms from lava cooling quickly on the Earth's surface would be classified as extrusive. Another term used to describe this type of igneous rock is volcanic.
3. The rock sample described is likely an extrusive igneous rock of felsic composition, possibly a rhyolite. This type of rock is primarily composed of light-colored minerals with few dark-colored minerals present.
4. The rock described is likely an intrusive igneous rock with a mafic composition. This might be a gabbro, which typically contains a high concentration of dark-colored, high-density minerals.
5. If gabbro is classified as an intrusive mafic igneous rock, it means that it was formed by magma cooling slowly within the Earth's crust (intrusive) and it is composed primarily of dark colored, high-density minerals (mafic).
Learn more about Igneous Rock Classification here:https://brainly.com/question/38148412
#SPJ11
Igneous rocks are classified as intrusive or extrusive based on whether they cool slowly within Earth's crust or quickly on the surface, resulting in coarse-grained or fine-grained textures, respectively. A light-colored, surface-formed rock is likely extrusive and felsic, while a dark-colored, crust-formed rock is likely intrusive and mafic. Gabbro is an intrusive mafic igneous rock, meaning it has a coarse-grained texture and is composed of dark, dense minerals.
Explanation:Igneous rocks are classified into two main types based on their formation process and resultant textures: intrusive (or plutonic) and extrusive (or volcanic).
1. When igneous rock forms from magma that cools slowly within Earth's crust, it is likely to have a coarse-grained texture due to the slow crystallization process that allows larger mineral crystals to form. This type of igneous rock is referred to as intrusive or plutonic.
2. Igneous rock that forms from lava cooling quickly on Earth's surface is classified as extrusive. This type of rock is also known as volcanic igneous rock, and it typically has a fine-grained texture due to the rapid cooling that allows only small crystals to form.
3. An igneous rock sample that formed on the surface of Earth and is composed mostly of light-colored minerals is likely an extrusive rock with a felsic composition, which means it is rich in silica. Common examples of this type include rhyolite or dacite.
4. An igneous rock that formed within Earth's crust and contains a high concentration of dark-colored, high-density minerals is likely an intrusive rock with a mafic composition, which means it is rich in magnesium and iron. This would typically correspond to a rock like gabbro.
5. Gabbro being an intrusive mafic igneous rock means that it formed within the crust from slowly cooled magma, and it is composed primarily of dark minerals like pyroxene and olivine, which are higher in density compared to the minerals that compose felsic rocks.
Learn more about Igneous Rocks here:https://brainly.com/question/30989504
#SPJ3
How is an organism related to a population?
A population is all the organisms of a single species in a given area
Answer:
Explanation:
A population is a group of organisms of the same type. A population is a group of members that belong to the same species.
Therefore, an organism is a part of a population.
How do cells reproduce? ∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵∵
Answer:
Cells divide to reproduce. There are two primary methods used, one for somatic cells, which compose the organism’s body, and one for reproductive cells, or gametes.
Scientists call the process of somatic cell division mitosis. Mitosis has six distinct steps in which the cell organizes and copies the DNA in the nucleus. Once copied, each new cell has its own copy of the DNA. The six steps of mitosis are prophase, prometaphase, metaphase, anaphase, telophase and cytokinesis. Some authorities consider the non-dividing portion of the cell’s lifecycle, known as interphase, to be one of seven steps involved in mitosis; however, interphase cells are not actively dividing.
Sex cells, such as sperm or eggs, must divide differently. Sex cells only possess one-half of the DNA that makes up a new animal. That way, when they combine, the resulting organism gets half of its DNA from its mother and half from its father. Because sex cells only want half of the DNA in each cell, they go through a different division process called meiosis. In meiosis, the cells split a second time, which yields four daughter cells rather than two as with mitosis; however, this provides each daughter cell with 23 chromosomes in contrast to the 46 chromosomes in somatic cells.
Hydrogen bonds between adenine & thymine or guanine and cytosine form ______ _______ that join the two strands of the DNA double helix. What is the blank? (Hint: the third letter of the first word is an S & both words combined can only be 9 letters) Please help! I have no idea :(
Base pairs.
Four + Five = Nine
The third letter in base is S.
IT ADDS UP.
In DNA, hydrogen bonds form base pairs between adenine and thymine or guanine and cytosine, which stabilize the double helix structure.
Explanation:The hydrogen bonds between adenine (A) and thymine (T) or guanine (G) and cytosine (C) form base pairs that join the two strands of the DNA double helix. In DNA, adenine forms a base pair with thymine and guanine forms a base pair with cytosine. These base pairs are fundamental in the structure of the DNA double helix. The arrangement was suggested by Chargaff's Rules and is consistent with Watson and Crick's proposed model of DNA. Two hydrogen bonds form in an A-T base pair and three in a G-C base pair, maintaining the stability of the DNA structure.
Learn more about Base pairs here:https://brainly.com/question/31452456
#SPJ11