How many moles of acetylene gas occupies a volume of 3.25 liters at STP?

Answer:

SORRY

Explanation:

jcuxicicciigxicixgsory

Answer:

80g

Explanation:

2H2 + O2 —> 2H2O

MM of H2O = (2x1) + 16 = 2 + 16 = 18g/mol

Mass conc. of H2O from the balanced equation = 2 x 18 = 36g

MM of O2 = 16 x 2 = 32g/mol

From the equation,

32g of O2 reacted to produce 36g of H2O.

Therefore Xg of O2 will react to produce 90g of H2O i.e

Xg of O2 = (32x90)/36 = 80g

Answer:

Potential Energy

Explanation:

Right now, the match is giving off no energy to it's environment.

Light it.

Now it's giving off a few kinds:

The match has the potential to have energy, but it currently has none.

Answer:D. 1013 g O2

Explanation: solution attached:

Convert mass of glucose to moles

Do the mole ratio of glucose and oxygen gas based on the balanced equation

Convert moles of O2 to mass using its molar mass

Answer:

60-20=40km west because the direction Will favour whichever direction is bigger

Final answer:

The average velocity of the car is the total displacement divided by time, which is 40 km to the west, direction included as velocity is a vector quantity.

Explanation:

The question asks for the average velocity of a car that has moved 20 km east and then 60 km west. To calculate the average velocity, we need to find the total displacement divided by the total time taken. However, the time is not given, so we assume the question seeks the average velocity in terms of displacement.

Since velocity is a vector quantity, it takes into account both magnitude and direction. The car's total displacement is the sum of the individual displacements taking direction into account: 20 km east (which we can denote as +20 km) and 60 km west (denoted as -60 km). Therefore, the total displacement is -40 km (20 km - 60 km), indicating a net displacement of 40 km to the west.

If we were given a time interval, we could divide the total displacement by this time to find the average velocity. However, since time is not provided, the average velocity in terms of displacement is simply -40 km divided by the given time. We need to include the direction in our answer, which is west in this case.

1. D

2. C

3. E

4. B

5. A

hope this helps

Answer:

                     True

Explanation:

                        Hydrocarbons are classified in to Unsaturated and Saturated classes.

                    Saturated Compounds:

                                                             These are those organic compounds which has only single bonds between the carbon atoms. For example, Alkane are the saturated compounds. The Carbon atom in these compounds are Sp³ hybridized and the geometry along carbon atom is tetrahedral.

                    Unsaturated Compounds:

                                                             These are those organic compounds which has either a double bond (alkenes) or triple bonds (alkynes) between the carbon atoms. The Carbon atom in alkenes is Sp² hybridized and the geometry along carbon atom is triangular while, The Carbon atom in alkynes is Sp hybridized and the geometry along carbon atom is linear.

                     The reaction in which alkanes (saturated) compounds are converted into alkenes are called as dehydrogenation reactions while, the reactions in which the unsaturated compounds (alkene and alkyne) are converted into saturated compounds are called as hydrogenation or reduction reactions. Hence, we can conclude that the dehydrogenation of alkanes results in the formation of unsaturated compounds.

Answer:true

Explanation: alkenes has a double bond

Answer:

D

Explanation:

Answer:

heat is absorbed by the reaction

Explanation:

By combining aqueous solutions of calcium chloride and sodium carbonate, a solid calcium carbonate is produced.  The  CaCO 3  is trapped by the paper which forms as a precipitate, but the  NaCl  passes through the filter paper with the water.

Explanation:

                CaCl 2 (aq) + Na 2 CO 3 (aq) → CaCO 3 (s) + 2NaCl(aq)

Answer:

5.46

Explanation:

Answer: 5.46

Explanation:

Answer:

C since however many times you repeat an experiment, it should give the exact same results or it wouldn't be accurate enough. ex if you measure a liquid to be 77ml in USA, it should give the same when measured in Germany, same with repeating experiments.

Different results from an experiment's repetition could be due to several reasons, such as changes in conditions, measurement errors, or random variations, and do not necessarily mean the experiment is flawed or a set of results should be ignored. Both sets of results should be compared to determine potential differences.

When an experiment is repeated and the new results are different from the original results, it's safe to assume that both sets of results may be inaccurate for a variety of reasons (Option C). This does not necessarily imply that the experiment is flawed and must be redesigned, nor that the results from the second experiment should be ignored.

In science, reproducibility and consistency are key. There could be various factors leading to differing results, such as changes in conditions, measurement errors, or random variations. It is crucial to carefully review both sets of experimental results and determine if any variables or factors might have considerably altered between the experiments. In some cases, multiple repeats of the experiment may be required to arrive at a consistent result.

https://brainly.com/question/38199898

#SPJ3

Answer:

c

Explanation:

Answer:

c

Explanation:

Here's a screenshot from the quiz. :)

Final answer:

The volume of a 2.0 M solution of LiF when 4.00 moles of LiF are added is 2.00 liters, calculated by dividing the moles of solute by the molarity.

Explanation:

To calculate the volume of a 2.0 M solution of LiF when you have added 4.00 moles of LiF, you can use the formula for molarity (M), which is moles of solute divided by liters of solution. Thus, the volume V (in liters) can be found using the equation M = moles of solute / V. When you rearrange the formula to find V, it becomes V = moles of solute / M.

Using the given values, the volume V of the LiF solution is:

V = 4.00 moles of LiF / 2.0 M

V = 2.00 liters

The coefficients in a chemical equation represent the number of molecules or formula units of the reactants and products involved in the reaction and are crucial for ensuring the conservation of mass and for stoichiometric calculations.

The coefficients in front of the reactants and products in a chemical reaction represent the relative numbers of molecules or formula units of those substances that participate in the reaction. When balancing chemical equations, these coefficients ensure that the equation adheres to the law of conservation of mass, meaning the number of atoms of each element is the same on both sides of the equation. For example, in the balanced equation for the combustion of methane, CH4 + 2O2 → CO2 + 2H2O, the coefficient '2' in front of O2 indicates that two molecules of oxygen are required for every molecule of methane (1CH4).

These coefficients also describe the mole ratio of reactants to products, which is essential for stoichiometric calculations in chemistry, enabling a quantitative assessment of the reaction. This quantification is necessary for applications such as determining the amounts of reactants needed or the amounts of products that will be formed in a given chemical reaction. Omitting a coefficient implies that the coefficient is '1', as in the molecule CO2 in the given equation.

Answer:

HBr + Mg(OH)2 —> MgBr2 + H2O.

To balance the above, we must do a head count of the individual atoms present to ensure they balance on both sides of the equation. To get the balance equation, add 2 in front of HBr and 2 in front of H2O as shown below:

2HBr + Mg(OH)2 —> MgBr2 + 2H2O

We can see clearly that the numbers of the individual atoms on the left side is the same on the right side

People firstly believe that the planets move in a circular orbit until Newton came up with his hypothesis by inventing calculus so that we could understood and calculated planetary orbits and their accuracy.

Explanation:

Answer:

Everyone assumed the planets were perfect circles until Newton came up with an idea. Slowly people would make maps of the orbits that added circles on circles, and they could never really explain about the movement of the planet. They simply say that planets move on circles but they lacked the math to explain or prove it. Then Newton came up with an idea of inventing calculus so that we could understood and calculated planetary orbits and their accuracy.

Firstly people used their observations and say that the orbits looked like circles, then they developed their models and did the math, and proposed their hypothesizes which were wrong, until Newton came along and tried to match a model that used elliptical orbits and invented the math that allowed him to make predictions with it. His model worked for most planets.

However he could not explain about the planet Mercury for instance since it was a very strange orbit. Then after the Einstein's theory of General Relativity he could also explain very deeply about it.

Scientists and Astronomers made hypothesizes that there was another planet orbiting too close to the sun to see with telescopes, called Vulcan, that explained mercury's orbit before Einstein's theory. Then long after we had telescopes which was good enough to see if there was a planet orbiting closer to the sun than mercury.

Answer:

Explanation:

Q = mcAT= should be mc(T2-T1)

for Aluminum

Q = 3  1000g Al x(0.897J/gC  x(23-18 C)= 16722 J

The correct answer is 13,455

[tex]Q=mc[/tex]Δ[tex]T[/tex]

What is meant specific heat?

Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree.

Does Aluminium have a high specific heat?

Aluminum also has a higher specific heat capacity, it takes more energy to raise a unit mass of aluminum by one degree Celsius than iron.

Learn more about specific Heat Capacity here: https://brainly.com/question/19053693

#SPJ2

Answer:

Heat

Explanation:

See above for the answer

nswer:

Heat

Explanation:

Heat is a form of energy (thermal energy) in transition, which is transferred by non-mechanical means due to a temperature difference.

Heat always flows from the higher temperature system to the lower temperature system.

Its nature is transitory, so it makes no sense to speak of heat stored in a system, but of heat flowing from one system or substance to another given a temperature difference.

If there is no difference in temperature, no heat will flow between systems or substances.

Strong electrolyte

hope this helps

Calcium hydroxide, Ca(OH)2, is classified as a strong electrolyte because it fully dissociates into ions when dissolved in water, despite its low solubility.

The question asks to classify Ca(OH)2 as a strong electrolyte, weak electrolyte, or nonelectrolyte. Calcium hydroxide, Ca(OH)2, is considered a strong electrolyte because when it dissolves in water, it dissociates completely into calcium ions (Ca²⁺) and hydroxide ions (OH⁻). Even though the solubility of Ca(OH)2 is relatively low, the portion that does dissolve dissociates 100% into ions, allowing it to conduct electricity well.

Answer:

The Answer is B

Explanation:

Because a cell is the small unit of life it is the one that help us.

A cell is the smallest unit of life, performing various functions in living organisms. Cells make up tissues in the human body.

According to Mike's mom, a cell is the smallest unit of life. It is a microscopic structure that makes up all living organisms, including plants and animals.

Cells perform various functions, such as energy production and protection. They contain different components, including a nucleus, cytoplasm, and cell membrane.

For example, in a human body, cells form different types of tissues, such as muscle tissue or nerve tissue, which have specific functions in the body.

https://brainly.com/question/31349292

#SPJ3

The molality is 0.54 M when 1.34 moles of NaCl is present in 2.47 kg of solvent.

Explanation:

Molality is the measure of how much of amount of solute is dissolved in the solvent. So it is calculated as the ratio of moles of solute to the grams of solvent.

         [tex]\text {Molality}=\frac{\text {Moles of solute}}{\text {Mass of solvent}}[/tex]

As in this case, the solute is NaCl and solvent is unknown. So the moles of solute is given as 1.34 moles and the mass of solvent is given as 2.47 kg.

Hence, [tex]\text { molality }=\frac{1.34}{2.47}= 0.54 \mathrm{M}[/tex]

Thus, the molality is 0.54 M when 1.34 moles of NaCl is present in 2.47 kg of solvent.

The molality of a solution containing 1.34 moles of NaCl in 2.47 kg of solvent is calculated by dividing the moles of NaCl by the kilograms of solvent, resulting in approximately 0.5425 moles per kilogram.

The molality of a solution is defined as the number of moles of solute per kilogram of solvent. In this case, we are asked to calculate the molality of a solution containing 1.34 moles of NaCl dissolved in 2.47 kg of solvent. To find the molality, we just need to divide the moles of solute by the kilograms of solvent.

The calculation would be:

Write down the molality equation: molality (m) = moles of solute / mass of solvent in kg.

Insert the given values into the equation: m = 1.34 moles NaCl / 2.47 kg solvent.

Calculate the result: m = (1.34 moles) / (2.47 kg) = approx. 0.5425 moles/kg. This is the molality of the NaCl solution.

Answer:The formula of magnesium argonide is H2MgO

Explanation:

Answer:

H2MgO that is the answer. have a nice day.

Answer:

a chemical formula

Explanation:

Answer:

structural formula

Explanation:

In chemical formula. Structural formulas identify the location of chemical bonds between the atoms of a molecule. A structural formula consists of symbols for the atoms connected by short lines that represent chemical bonds—one, two, or three lines standing for single, double, or triple bonds, respectively.

The welder will run out of Fe₂O₃ first. Even though the mass of aluminum is larger, the reaction requires twice as much of it, so Fe₂O₃ will be used up first.

To determine which reactant will run out first, you must look at the stoichiometry of the chemical reaction. The relevant reaction here is the thermite reaction, which is:

Fe₂O₃+ 2Al → 2Fe + Al₂O₃

In the balanced reaction, you can see that 1 mol of Fe₂O₃ reacts with 2 mol of Al. Calculating moles from a given mass, Fe₂O₃ has approximately 0.012 mol and Al has approximately 3.5 mol.

Therefore, even though there is more mass of Al, Fe₂O₃ will run out first because the reaction requires twice as much Al as Fe₂O₃. This condition is called a limiting reactant problem in chemistry.

https://brainly.com/question/33417913

#SPJ11

Answer:

The correct answer is 0, 235 mol

Explanation:

We use the formula PV =nRT. The normal conditions of temperature and pressure are 273K and 1 atm, we use the gas constant = 0, 082 l atm / K mol:

1 atm x 5, 25l = n  x 0, 082 l atm / K mol x 273 K

n= 1 atm x 5, 25l /0, 082 l atm / K mol x 273 K

n= 0, 235 mol

To calculate the number of moles of oxygen gas in 5.25 L at STP, divide the volume by the molar volume of a gas at STP, which is 22.4 L/mol. This results in approximately 0.2344 moles of oxygen gas.

The student is asking about the number of moles of oxygen gas in 5.25 liters at standard temperature and pressure (STP). To find this, we use the concept of molar volume which states that one mole of any gas at STP occupies 22.4 liters.

We can set up a conversion factor to calculate moles from volume:

Dividing 5.25 liters by 22.4 liters per mole gives us:

5.25 L / 22.4 L/mol ≈ 0.2344 moles of O2

Answer:

the correct answer would be A.

Explanation:

Answer:

Groundwater flow rates are controlled by the permeability of the aquifer through which the water is flowing and by the local hydraulic gradient (the drop in hydraulic head per unit distance; equal to the slope of the water table for unconfined aquifers).

Explanation:

I hope that helps you

Answer:

An example of a capital good is "the government will open another public school in the area".

Explanation:

A capital good or complicated products and systems or (CoPS) is a reliable commodity used in the manufacturing of goods and services. These are one of three kinds of consumer commodities, while the other two are property and labor.

The three are also commonly referred to as primary production factors.They are recorded on a company's balance sheet as assets, and can be depreciated over time. Capital goods instances include furniture, buildings, machinery, equipment and fixtures.

A capital good, like a factory building or a delivery van, is a tangible asset used by an organization to produce goods or services. It is part of the production process to provide consumer goods or services.

A capital good is any tangible asset that an organization uses to produce goods or services that are used in the production process to provide consumer goods or services. Common examples of capital goods include buildings, machinery, equipment, vehicles, and tools. By this definition, a factory building would be a capital good as it is used by companies to manufacture products. Other examples include a delivery van used by a courier service or a wood oven used by a bakery.

https://brainly.com/question/36979153

#SPJ3

The mass of aluminium hydroxide is 81.12 g.

Explanation:

The chemical equation for the decomposition of Aluminium hydroxide follows:

                    2 Al(OH)3 ------> Al2O3 + 3H2O

At STP:

22.4 L of volume is occupied by 1 mole of a gas.

So, 35 L of the  volume will be occupied by = (1 / 22.4) [tex]\times[/tex] 35 = 1.56 mol

By Stoichiometry of the reaction:

3 moles of water is produced by 2 moles of Aluminium hydroxide

So, 1.56 moles of water is produced by = (2 /3) [tex]\times[/tex] 1.56 = 1.04 mol.

To calculate the mass of Aluminium hydroxide, we use the equation:

         Number of moles = given mass / molar mass

Number of moles of Aluminium hydroxide = 1.04 mol

The Molar mass of Aluminium hydroxide = 78 g/mol

Putting values in above equation, we get:

           1.04 mol = mass of Aluminium hydroxide / 78

The mass of Aluminium hydroxide needed is 81.12 grams.