How many grams of sulfur dioxide (SO2) are there in a 3.50 L container at 100°C and a pressure of 2.00 atm?

Answers

Answer 1

Answer: The mass of sulfur dioxide is 14.6 grams

Explanation:

To calculate the number of moles, we use the equation given by ideal gas, which follows:

[tex]PV=nRT[/tex]

where,

P = pressure of the sulfur dioxide = 2.00 atm

V = Volume of the sulfur dioxide = 3.50 L

T = Temperature of the mixture = [tex]100^oC=[100+273]K=373K[/tex]

R = Gas constant = [tex]0.0821\text{ L. atm }mol^{-1}K^{-1}[/tex]

n = number of moles of sulfur dioxide = ?

Putting values in above equation, we get:

[tex]2.00atm\times 3.50L=n_{SO_2}\times 0.0821\text{ L atm }mol^{-1}K^{-1}\times 373K\\\\n_{SO_2}=\frac{2.00\times 3.50}{0.0821\times 373}=0.228mol[/tex]

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Moles of sulfur dioxide = 0.228 moles

Molar mass of sulfur dioxide = 64 g/mol

Putting values in above equation, we get:

[tex]0.228mol=\frac{\text{Mass of sulfur dioxide}}{64g/mol}\\\\\text{Mass of sulfur dioxide}=(0.228mol\times 64g/mol)=14.6g[/tex]

Hence, the mass of sulfur dioxide is 14.6 grams


Related Questions

In this lab you will need to prepare solutions using dilutions. Starting with the stock 0.300 M NaOH solution, how would you prepare a 0.050 M NaOH solution (using 0.300 M NaCl as the diluent)? To prepare 24 mL of 0.050 M NaOH solution, you would add mL of 0.300 M NaOH stock solution and mL of 0.300 M NaCl solution.

Answers

Answer:

To prepare 24 mL of 0.050 M NaOH solution, you would add 4 mL of 0.300 M NaOH stock solution and 20 mL of 0.300 M NaCl solution.

Explanation:

Molarity of the NaOH solution = [tex]M_1=0.300 M[/tex]

Volume of the NaOH solution = [tex]V_1=?[/tex]

Molarity of the NaOH solution after dilution= [tex]M_2=0.050 M[/tex]

Volume of the NaOH solution after dilution= [tex]V_2=24 mmL[/tex]

[tex]M_1V_1=M_2V_2[/tex] (Dilution )

[tex]V_1=\frac{M_2V_2}{M_1}=\frac{0.050 M\times 24 mL}{0.300 M}=4 mL[/tex]

Volume of NaCl solution of 0.300 M = 24 mL - 4 mL = 20 mL

To prepare 24 mL of 0.050 M NaOH solution, you would add 4 mL of 0.300 M NaOH stock solution and 20 mL of 0.300 M NaCl solution.

To prepare 24 mL of 0.050 M NaOH solution, you would add 4 mL of 0.300 M NaOH stock solution and 20 mL of 0.300 M NaCl solution

Determination of the volume of the stock solution of NaOH needed

•Molarity of stock solution (M₁) = 0.3 M

•Molarity of diluted solution (M₂) = 0.05 M

•Volume of diluted solution (V₂) = 24 mL

•Volume of stock solution needed (V₁) =?

Using the dilution formula, the volume of the stock solution needed can be obtained as follow:

M₁V₁ = M₂V₂

0.3 × V₁ = 0.05 × 24

0.3 × V₁ = 1.2

Divide both side by 0.3

V₁ = 1.2 / 0.3

V₁ = 4 mL

Determination of the volume of NaCl needed

•Volume of NaOH needed = 4 mL

•Volume of diluted solution of NaOH = 24 mL

•Volume of NaCl needed =?

Volume of NaCl needed = (Volume of diluted solution of Na) – (Volume of NaOH needed)

Volume of NaCl needed = 24 – 4

Volume of NaCl needed = 20 mL

Therefore, we can conclude as follow:

To prepare 24 mL of 0.050 M NaOH solution, you would add 4 mL of 0.300 M NaOH stock solution and 20 mL of 0.300 M NaCl solution.

Learn more about molarity of solution:

https://brainly.com/question/7429224

The rate constant for a certain reaction is k = 4.50×10−3 s−1 . If the initial reactant concentration was 0.400 M, what will the concentration be after 11.0 minutes?

Answers

Answer: The concentration of reactant after the given time is 0.0205 M

Explanation:

Rate law expression for first order kinetics is given by the equation:

[tex]k=\frac{2.303}{t}\log\frac{[A_o]}{[A]}[/tex]

where,  

k = rate constant  = [tex]4.50\times 10^{-3}s^{-1}[/tex]

t = time taken for decay process = 11.0 min = 660 s  (Conversion factor:  1 min = 60 s)

[tex][A_o][/tex] = initial amount of the reactant = 0.400 M

[A] = amount left after decay process =  ?

Putting values in above equation, we get:

[tex]4.50\times 10^{-3}s^{-1}=\frac{2.303}{660s}\log\frac{0.400}{[A]}[/tex]

[tex][A]=0.0205M[/tex]

Hence, the concentration of reactant after the given time is 0.0205 M

What does ""electron density in a particular tiny volume of space"" mean?

Answers

Explanation:

Electron Density is nothing but finding of some electron in a tiny space of per unit volume. It is rather a probability of finding electron in per unit volume, it should be called electron probability density. And there is function Ψ^2 that represent probability of finding electron in some tiny volume of of the atom.

Which of these are paramagnetic in their ground state?
(a) Ga (b) Si (c) Be (d) Te

Answers

Answer:

(a) Ga (b) Si (d) Te

Explanation:

Paramagnetic are those which has unpaired electrons and diamagnetic are those in which all electrons are paired.

(a) Ga

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^1[/tex]

The electrons in 4p orbital = 1 (Unpaired)

Thus, the element is paramagnetic as the electrons are unpaired.

(b) Si

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^2[/tex]

The electrons in 3p orbital = 2 (Unpaired)

Thus, the element is paramagnetic as the electrons are unpaired.

(c) Be

The electronic configuration is -  

[tex]1s^22s^2[/tex]

The electrons in 2s orbital = 2 (paired)

Thus, the element is diamagnetic as the electrons are paired.

(d) Te

The electronic configuration is -  

[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^64d^{10}5s^25p^4[/tex]

The electrons in 5p orbital = 4 (1 pair and 2 Unpaired)

Thus, the element is paramagnetic as the electrons are unpaired.

Draw a Lewis structure for SO 2 in which all atoms have a formal charge of zero. Do not consider ringed structures.

Answers

Answer :  The Lewis-dot structure of [tex]SO_2[/tex] is shown below.

Explanation :

Lewis-dot structure : It shows the bonding between the atoms of a molecule and it also shows the unpaired electrons present in the molecule.

In the Lewis-dot structure the valance electrons are shown by 'dot'.

The given molecule is, [tex]SO_2[/tex]

As we know that sulfur and oxygen has '6' valence electrons.

Therefore, the total number of valence electrons in [tex]SO_2[/tex] = 6 + 2(6) = 18

According to Lewis-dot structure, there are 8 number of bonding electrons and 10 number of non-bonding electrons.

Now we have to determine the formal charge for each atom.

Formula for formal charge :

[tex]\text{Formal charge}=\text{Valence electrons}-\text{Non-bonding electrons}-\frac{\text{Bonding electrons}}{2}[/tex]

[tex]\text{Formal charge on S}=6-2-\frac{8}{2}=0[/tex]

[tex]\text{Formal charge on }O_1=6-4-\frac{4}{2}=0[/tex]

[tex]\text{Formal charge on }O_2=6-4-\frac{4}{2}=0[/tex]

A 34.57 mL sample of an unknown phosphoric acid solution is titrated with a 0.127 M sodium hydroxide solution. The equivalence point is reached when 28.2 mL of sodium hydroxide solution is added. What is the concentration of the unknown phosphoric acid solution?

Answers

Final answer:

The concentration of the unknown phosphoric acid solution can be determined using the concept of stoichiometry in titrations. In this case, the concentration of the sodium hydroxide solution and the volume used at the equivalence point are known. By using the given information, the concentration of the unknown phosphoric acid solution can be calculated to be approximately 0.150 M.

Explanation:

The concentration of the unknown phosphoric acid solution can be determined using the concept of stoichiometry in titrations. In this case, the concentration of the sodium hydroxide solution and the volume used at the equivalence point are known. By using the equation:

NaOH (aq) + H3PO4 (aq) → NaH2PO4 (aq) + H2O (l)

the moles of sodium hydroxide can be determined. Then, by considering the volume and concentration of the phosphoric acid solution, the concentration of the unknown phosphoric acid solution can be calculated. In this case, the concentration of the unknown phosphoric acid solution is approximately 0.150 M.

Draw the structure of the aromatic compound para-aminochlorobenzene (para-chloroaniline). Draw the molecule on the canvas by choosing buttons from the Tools

Answers

Answer:

Explanation:

In the picture you have the answer.

Now, let's analize the structure, so you can know why the structure in the picture is the correct structure.

The aniline is the name that receives the benzene with a NH2 group as one of it's substituent. Now, This group is a really strong activating group and in the nomenclature priority, it has more order priority than any halide.

Now, it says that the chloro it's on the para position. The "para" position in a aromatic ring, in this case, the benzene, refers to the position of this substituent to the first substitued position. In this case, the NH2 it's on the position 1 or carbon 1, the para position, means that it's on position 4 of the ring. The ortho position is carbon 2, and meta position is carbon 3 of the benzene. So, according to this, the p-chloroaniline it's on picture attached.

Match the following aqueous solutions with the appropriate letter from the column on the right. 1. 0.27 m NH4I A. Highest boiling point 2. 0.11 m FeCl3 B. Second highest boiling point 3. 0.16 m CaI2 C. Third highest boiling point 4. 0.50 m Sucrose(nonelectrolyte) D. Lowest boiling point Submit AnswerRetry Entire Group9 more group attempts remaining

Answers

Answer:

1. 0.27 m [tex]NH_4I[/tex]  : Highest boiling point

2.  0.11 m

: Lowest boiling point

3. 0.16 m

: Third highest boiling point

4.  0.5 m sucrose : Second highest boiling point

Explanation:

[tex]\Delta T_b=i\times k_b\times m[/tex]

[tex]\Delta T_b[/tex] =  elevation in boiling point

i = Van'T Hoff factor  

[tex]k_b[/tex] = boiling point constant

m = molality

1. For 0.27 m [tex]NH_4I[/tex]

[tex]NH_4I\rightarrow NH_4^{+}+I^{-}[/tex]  

, i= 2 as it is a electrolyte and dissociate to give 2 ions. and concentration of ions will be [tex]2\times 0.27=0.54m[/tex]

2.  For 0.11 m [tex]FeCl_3[/tex]

[tex]FeCl_3\rightarrow Fe^{3+}+3Cl^{-}[/tex]  

i= 4 as it is a electrolyte and dissociate to give 4 ions. and concentration of ions will be [tex]4\times 0.11=0.44m[/tex]

3.  For 0.16 m [tex]CaCl_2[/tex]

[tex]CaCl_2\rightarrow Ca^{2+}+2Cl^{-}[/tex]  

, i= 3 as it is a electrolyte and dissociate to give 3 ions, concentration of ions will be [tex]3\times 0.16=0.48m[/tex]

4. For 0.5 m sucrose

, i= 1 as it is a non electrolyte and does not dissociate to give ions, concentration will be 0.5 m

Thus as concentration of solute follows the order : [tex]NH_4I[/tex]  > sucrose > [tex]CaCl_2[/tex]  > [tex]FeCl_3[/tex], the boiling point will also follow the same order.

Plasmid DNA and a gene of interest are cut with the enzyme PpuMI. Write a possible sequence of bases for the sticky end of the gene in the 5' to 3' direction.

Answers

The possible 5' to 3' sequence of bases for the sticky end of the gene cut by PpuMI is: 5'-ACGGA-3'.

The enzyme PpuMI cuts DNA at recognition sequences. In the 5' to 3' direction, "ACGGA." might be the sticky end of the gene snipped by PpuMI. This indicates that one DNA strand reads 5'-ACGGA-3' and the other 3'-TGCCT-5'.

These overhanging single-stranded ends are called "sticky ends" because they can base-pair with complementary sequences in another DNA fragment cut with the same enzyme. In genetic engineering, like cloning, DNA fragments with matching sticky ends can be joined to form recombinant DNA. PpuMI-generated sticky ends with the sequence "ACGGA" allow scientists to insert genes of interest into plasmids or other DNA molecules for study and practical applications.

Learn more about Plasmid DNA, here:

https://brainly.com/question/34824901

#SPJ12

Final answer:

The possible sequence of bases for the sticky end of the gene in the 5' to 3' direction after being cut with PpuMI is 5'-GAAC (gene) TTGC-3'.

Explanation:

The sequence of bases for the sticky end of the gene in the 5' to 3' direction after being cut with the enzyme PpuMI can be determined from the given information. The restriction enzyme PpuMI leaves a 2- to 4-nucleotide single-stranded overhang on each strand of the DNA after cutting. The sequence that is recognized by PpuMI is a palindrome, meaning it reads the same forward and backward. Therefore, the possible sequence of bases for the sticky end of the gene in the 5' to 3' direction is: 5'-GAAC (gene) TTGC-3'

Learn more about DNA after cutting here:

https://brainly.com/question/29306702

#SPJ11

How is the molar heat of sublimation related to the molar heats of vaporization and fusion? On what law are these relationships based?

Answers

Answer: Hsub=Hfus+Hvap

Explanation:

The molar heat of vaporization measured in kilojoules per mole, or kJ/mol is the energy needed to make vapor one mole of a liquid. .

The molar heat of sublimation measured in kilojoules per mole, or kJ/mol is the energy needed to sublime one mole of a solid,

the molar heat of fusion measured in kilojoules per mole, or kJ/mol is the energy needed to melt one mole of a solid.

Hess law helps to explain the relationship in physical chemistry stating that the total enthalpy change during the complete course of a reaction is the same whether the reaction is made in one step or in several steps.

In this context Hess’s law helps to see the several steps involved as the heat of sublimation energy is equal to the sum of vaporization energy and fusion energy.

The molar heat of sublimation is the sum of the molar heats of vaporization and fusion, based on Hess's Law. This law enables understanding that sublimation is similar to a sequential process of melting followed by vaporization, reflecting the energy required to overcome intermolecular forces.

The molar heat of sublimation is directly related to the molar heats of vaporization and fusion. The relationship between these heats is guided by the Hess's Law, which asserts that the total enthalpy change during a chemical reaction is the same no matter how many steps the reaction is carried out in.

Thus, for a given substance, the molar heat of sublimation can be approximated by the sum of its molar heat of fusion (solid to liquid transition) and molar heat of vaporization (liquid to gas transition). This is because when fusion is followed by vaporization at the temperature and pressure of the triple point, the net change corresponds to sublimation.

The molar enthalpies related to phase changes are all positive for endothermic processes (where heat is absorbed). Conversely, negative enthalpy changes are associated with the reverse, exothermic processes. The differences in these heats reflect the extent to which intermolecular forces must be overcome going from one phase to another.

Which element in each of the following sets would you expect to have the highest IE₂?
(a) Na, Mg, Al (b) Na, K, Fe (c) Sc, Be, Mg

Answers

Explanation:

Ionization energy is defined as the energy required to remove the most loosely bound electron from a neutral gaseous atom.

With increase in atomic size of the atom, there will be less force of attraction between the nucleus and the valence electrons of the atom. Hence, with lesser amount of energy the valence electrons can be removed easily.

Since, Na, Mg and Al are all period 3 elements. And, when we move across a period from left to right then there occurs a decrease in atomic size of the atoms. Hence, smaller is the size of an atom more energy is required to remove an electron.

Therefore, out of Na, Mg, the highest [tex]IE_{2}[/tex] will be that of Na. This is because when sodium will lose one electron then it forms [tex]Na^{+}[/tex] ion which is stable in nature.

Hence, in order to remove another electron from [tex]Na^{+}[/tex] will be difficult. Therefore, it will have high [tex]IE_{2}[/tex].

Similarly, Na will have highest [tex]IE_{2}[/tex] as compared to K and Fe. Also because sodium is smaller in size than K.

Since, beryllium is smallest in size as compared to Mg and Sc. Hence, Be will have the highest [tex]IE_{2}[/tex].

Final answer:

The elements expected to have the highest second ionization energy (IE₂) from the given sets are Mg for set (a), Fe for set (b), and Be for set (c), based on their electronic configurations and positions on the periodic table.

Explanation:

The student is asking about the second ionization energy (IE₂) for various sets of elements. Ionization energy is the energy required to remove an electron from an atom or ion. The second ionization energy specifically refers to the energy required to remove a second electron after one has already been removed. Generally, this energy is greater than the first ionization energy because the remaining electrons feel a greater effective nuclear charge.

For the sets given:

(a) Na, Mg, Al: Mg (Magnesium) expected to have the highest IE₂ because it will be removing an electron from a full s-orbital, which requires more energy.

(b) Na, K, Fe: Fe (Iron) is likely to have the highest IE₂ as it is a transition metal with more protons in the nucleus, resulting in a stronger attraction to the remaining electrons.

(c) Sc, Be, Mg: Be (Beryllium) should have the highest IE₂ because removing the second electron will remove a completely filled s-orbital, which is a stable configuration requiring more energy to disrupt.

The vapor pressure of diethyl ether (ether) is 463.57 mm Hg at 25 °C. A nonvolatile, nonelectrolyte that dissolves in diethyl ether is testosterone. Calculate the vapor pressure of the solution at 25 °C when 7.752 grams of testosterone, C19H28O2 (288.4 g/mol), are dissolved in 208.0 grams of diethyl ether. diethyl ether = CH3CH2OCH2CH3 = 74.12 g/mol.

Answers

Answer: The vapor pressure of solution is 459.17 mmHg

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]      .....(1)

For testosterone:

Given mass of testosterone = 7.752 g

Molar mass of testosterone = 288.4 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of testosterone}=\frac{7.752g}{288.4g/mol}=0.027mol[/tex]

For diethyl ether:

Given mass of diethyl ether = 208.0 g

Molar mass of diethyl ether = 74.12 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of diethyl ether}=\frac{208.0g}{74.12g/mol}=2.81mol[/tex]

Mole fraction of a substance is calculated by using the equation:

[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex]

[tex]\chi_{\text{testosterone}}=\frac{n_{\text{testosterone}}}{n_{\text{testosterone}}+n_{\text{diethyl ether}}}[/tex]

[tex]\chi_{\text{testosterone}}=\frac{0.027}{0.027+2.81}\\\\\chi_{\text{testosterone}}=0.0095[/tex]

The formula for relative lowering of vapor pressure will be:

[tex]\frac{p^o-p_s}{p^o}=i\times \chi_{\text{solute}}[/tex]

where,

[tex]p^o[/tex] = vapor pressure of solvent (diethyl ether) = 463.57 mmHg

[tex]p^s[/tex] = vapor pressure of the solution = ?

i = Van't Hoff factor = 1 (for non electrolytes)

[tex]\chi_{\text{solute}}[/tex] = mole fraction of solute (testosterone) = 0.0095

Putting values in above equation, we get:

[tex]\frac{463.57-p^s}{463.57}=1\times 0.0095\\\\p^s=459.17mmHg[/tex]

Hence, the vapor pressure of solution is 459.17 mmHg

Which element would you expect to be more metallic?
(a) S or Cl (b) In or Al (c) As or Br

Answers

Explanation:

When we move across a period from left to right then there will occur an increase in electronegativity and also there will occur an increase in non-metallic character of the elements.

As sulfur (S) is a group 16 element and chlorine (Cl) is a group 17 element. Hence, sulfur (S) is more metallic in nature than chlorine.

This means that chlorine (S) is less metallic than chlorine (Cl).

Both indium (I) and aluminium (Al) are group 13 elements. And, when we move down a group then there occur an increase in non-metallic character of the elements. As indium belongs to group 13 and period 5 whereas aluminium belongs to group 13 and period 3.

Therefore, aluminium (Al) is more metallic than indium (In).

Arsenic (Ar) is a group 15 element and bromine (Br) is a group 17 element. Therefore, arsenic is more metallic than bromine.

Final answer:

The most metallic element can be determined by looking at their positions in the periodic table.

Explanation:

The most metallic element can be determined by looking at their positions in the periodic table. Metallic character generally increases going down a group and decreases going across a period. Using this information, we can predict that:

(a) S is more metallic than Cl because S is below Cl in the same group and is further down the periodic table.

(b) In is more metallic than Al because In is below Al in the same group and is further down the periodic table.

(c) Br is more metallic than As because Br is to the left of As in the same period and closer to the metals in the periodic table.

You have a freshly prepared 1 M (molar) solution of glucose in water. You carefully pour out a 100 mL sample of that solution. How many glucose molecules are included in that 100 mL sample?

Answers

Answer:

[tex]6.022\times 10^{22} [/tex]glucose molecules are included in that 100 mL sample.

Explanation:

Concentration of freshly prepared glucose solution = 1 M = 1 mol/L

1 L = 1000 ml

This means that 1 mole of glucose is present in 1000 mL of water.

If we have 100 mL of solution. then number of moles of glucose will be L;

[tex]\frac{1}{1000}\times 100 mL=0.1 mole[/tex]

1 mole =  [tex]N_A=6.022\times 10^{23} [/tex] molecules/atoms

Number of molecules of glucose in 0.1 mole :

= [tex]0.1 mol\times 6.022\times 10^{23} molecules=6.022\times 10^{22} moleules[/tex]

The equilibrium constant, Kc, for the following reaction is 83.3 at 500 K. PCl3(g) Cl2(g) PCl5(g) Calculate the equilibrium concentrations of reactant and products when 0.400 moles of PCl3 and 0.400 moles of Cl2 are introduced into a 1.00 L vessel at 500 K.

Answers

Answer:

 [PCl₅]  = 0.336 M

  [Cl₂]  = [PCl₃]  = 0.064 M

Explanation:

We are given the equilibrium constant, kc ,  and the moles of reactants and products. Thus, our strategy here sholud be to express the quantities at equilibrium in terms of its constant by setting up our ICE table helper.

First lets  start by writing the expression for the equilibrium constant:

PCl₃ (g) + Cl₂ (g) ⇄ PCl₅(g)

Kc = [PCl₅] / [Cl₂] / [PCl₃] =83.3

and setup the ICE table

We are given the moles introduced in the 1.00 L vessel, so we can calculate the molarities as M = mol/L

                            [Cl₂]                     [PCl₃]                       [PCl₅]  

i                       0.400 M                 0.400 M                       0

c                          -x                            -x                            +x

e                     0.400 - x                 0.400 - x                     x

x / (0.400 - x )²  = 83.3

(0.16 - 0.8x + x²) x 83.3 = x

13.33 -66.66x + 83.3x² = x

13.33 - 67.66 x + 83.3 x² = 0

Solving the quadratic equation we have x₁ =  0.476 and x₂ = 0.336

The first solution is phisically impossible, since it will give us a negative quantity at equilibrim for the reactants.

With the second solution  x = 0.336, the equilibrium concentrations are:

 [PCl₅]  = 0.336 M

  [Cl₂]  =   [PCl₃]    = 0.400 - 0.336 = 0.064 M

     

Diethyl ether is a commonly used solvent for GC analyses because of its low boiling point. In this experiment, why was heptane used as the solvent instead? a. Diethyl ether will react with the alkenes that were formed in the experiment. b. Diethyl ether has a similar boiling point to that of the product. c. Heptane will not evaporate as fast as diethyl ether will. d. Heptane has a lower boiling point than that of diethyl ether.

Answers

Final answer:

Heptane was used as the solvent instead of diethyl ether because it has a lower boiling point, does not react with the alkenes formed in the experiment, and does not evaporate as fast.

Explanation:

In this experiment, heptane was used as the solvent instead of diethyl ether for several reasons:

Heptane has a lower boiling point than that of diethyl ether. This means that it will evaporate at a slower rate, allowing for better separation and detection of the analytes in the gas chromatography analysis.Diethyl ether will react with the alkenes that are formed in the experiment. This can lead to the formation of unwanted by-products and inaccurate results.Heptane does not evaporate as fast as diethyl ether, which can be advantageous in GC analyses where longer retention times are desired.

n acid with a pKa of 8.0 is present in a solution with a pH of 6.0. What is the ratio of the protonated to the deprotonated form of the acid?

Answers

Answer : The ratio of the protonated to the deprotonated form of the acid is, 100

Explanation : Given,

[tex]pK_a=8.0[/tex]

pH = 6.0

To calculate the ratio of the protonated to the deprotonated form of the acid we are using Henderson Hesselbach equation :

[tex]pH=pK_a+\log \frac{[Salt]}{[Acid]}[/tex]

[tex]pH=pK_a+\log \frac{[Deprotonated]}{[Protonated]}[/tex]

Now put all the given values in this expression, we get:

[tex]6.0=8.0+\log \frac{[Deprotonated]}{[Protonated]}[/tex]

[tex]\frac{[Deprotonated]}{[Protonated]}=0.01[/tex]  

As per question, the ratio of the protonated to the deprotonated form of the acid will be:

[tex]\frac{[Protonated]}{[Deprotonated]}=100[/tex]  

Therefore, the ratio of the protonated to the deprotonated form of the acid is, 100

The ratio of the protonated to the deprotonated form of the acid in the solution is 100:1.

The ratio of the protonated to the deprotonated form of the acid is given by the equation:

[tex]\[ \text{Ratio} = \frac{[\text{A}^-]}{[\text{HA}]} = 10^{(\text{pH} - \text{pKa})} \][/tex]

Given that the pKa of the acid is 8.0 and the pH of the solution is 6.0, we can plug these values into the equation:

[tex]\[ \text{Ratio} = \frac{[\text{A}^-]}{[\text{HA}]} = 10^{(6.0 - 8.0)} \] \[ \text{Ratio} = \frac{[\text{A}^-]}{[\text{HA}]} = 10^{-2} \] \[ \text{Ratio} = \frac{[\text{A}^-]}{[\text{HA}]} = \frac{1}{100} \][/tex]

Therefore, the ratio of the deprotonated form to the protonated form of the acid is 1:100. To find the ratio of the protonated to the deprotonated form, we take the reciprocal of this value:

[tex]\[ \text{Ratio of protonated to deprotonated} = \frac{[\text{HA}]}{[\text{A}^-]} = 100:1 \][/tex]

The answer is: 100:1.

Calculate the concentration of hydronium in a solution that contains 5.5x10-5 M OH- at 25C. Indentify the solution as acidic, basic, or neutral.

Answers

Answer:

pH = 9.74

The solution is basic

Explanation:

To find the pH of the solution, we need to find the pOH of the solution.

From the question, the concentration of OH^- = 5.5x10^-5 M

pOH = - Log[OH^-]

pOH = - Log 5.5x10^-5

pOH = 4.26

Recall,

pH + pOH = 14

pH = 14 — pOH

pH = 14 — 4.26

pH = 9.74

Since the pH is above 7, the solution is alkaline ie basic

(a) Write the rate law for the reaction 2A + B → C if the reaction (1) is second order in B and overall third order, –rA = ______ (2) is zero order in A and first order in B, –rA = ______ (3) is zero order in both A and B, –rA = ______ (4) is first order in A and overall zero order. –rA = ______ (b) Find and write the rate laws for the following reactions (1) H2 + Br2 → 2HBr (2) H2 + I2 → 2HI

Answers

Answer:

A. Write the rate law for this reaction

2A + B -----> C

Rate law is expressed as

-rA = kaCa^αCb^β

n = α + β

Where, ka is the rate constant;

Ca is the concentration of reactant A, Cb is the conversation of reactant B, α is the rate order for reactant A, β is the rate order for reactant B, n is the overall order.

1. β = 2, n = 3; α = 3-2 = 1

Rate law is;

-rA = ka[A][B]^2

2. α = 0, β = 1

-rA = ka[A]^0[B]

-rA = ka[B]

3. α=β=0

-rA = ka[A]^0[B]^0

-rA = ka

4. α=1, n = 0

The reaction is zero order as it is independent of the reactants.

-rA = ka

B. Rate law for the following;

a. H2+ Br2 ------>2HBr

-rA1 = ka[H2] . [Br2]

-rA2 = kb[HBr]^2

Comparing both rate, rA1= rA2

ka.[H2][Br2] = kb[HBr]^2

ka/kb = K = [HBr]^2 / [H2] [Br2]

b. H2 + I2 ------>2HI

K = [HI]^2 / [H2] [I2]

Final answer:

The rate laws for different reaction scenarios and specific reactions.

Explanation:

(a) The rate law for the reaction 2A + B → C can be determined by examining the reaction orders for each reactant. For the given scenarios:

When the reaction is second order in B and overall third order, the rate law is -rA = k[A]2[B].When the reaction is zero order in A and first order in B, the rate law is -rA = k[B].When the reaction is zero order in both A and B, the rate law is -rA = k.When the reaction is first order in A and overall zero order, the rate law is -rA = k[A].

(b) The rate laws for the given reactions are:

The rate law for the reaction H2 + Br2 → 2HBr is -rH2 = k[H2][Br2].The rate law for the reaction H2 + I2 → 2HI is -rH2 = k[H2][I2].

Learn more about Rate laws here:

https://brainly.com/question/35884538

#SPJ11

Indicate whether the substance exists in aqueous solution (a) entirely in molecular form, (b) entirely as ions, (c) or as a mixture of molecules and ions. HF, CH3CN, NaClO4, Ba(OH)2

Answers

Answer:

In aqueous solution, HF is an acid, exist as a mixture of molecules and ions

CH3CN is none of the above, entirely in molecular form

NaCIO4 is a salt, entirely as ions

Ba(OH)2 is a base, entirely as ions

The substance exists in aqueous solution entirely in molecular form is Methyl cyanide, entirely as ions is NaClO₄ & Ba(OH)₂ and HF as a mixture of molecules and ions.

What is aqueous solution?

Aqueous solutions are those solution in which water is present as a solvent and we know that nature of water is polar in water means it consist positive or negative charges.

HF is a weak acid and it shows partial dissociation only, so it is present in the mixture form of molecules and ions.Methyl cyanide is a covalent molecule not dissolve in aqueous solution and present in the molecular form.NaClO₄ is a salt and it is completely dissolve in aqueous solution and present in the ions form.Ba(OH)₂ is a strong base and it is also completely dissociates into their ions.

Hence NaClO₄ & Ba(OH)₂ is completely dissociates into ions.

To know more about aqueous solution, visit the below link:
https://brainly.com/question/14554879

Which of the following does not affect the rate of a reaction? Question 1 options: A) volume B) catalyst C) temperature D) nature of reactant g

Answers

Answer: option A. volume

Explanation:

i wanna say it’s b. i could b wrong

Which functional group does not contain an oxygen atom? Group of answer choices amine amide aldehyde ketone ether ester alcohol carboxylic acid

Answers

Answer: Amine does not contain an oxygen atom

Explanation:

amine is represented by -NH2

amide is represented by -CONH2

aldehyde is represented by -CHO

ketone is represented by -CO

ether is represented by -CO

ester is a represented by -COOR

alcohol is represented by -OH

carboxylic acid is represented by -COOH

You will observe that the only functional group without an oxygen atom is amine with -NH2

Amines are the functional group that does not contain an oxygen atom, distinguishing them from aldehydes, ketones, carboxylic acids, esters, ethers, alcohols, and amides. Option A is correct.

The functional group that does not contain an oxygen atom among the listed options is the amine group. Functional groups like aldehydes, ketones, carboxylic acids, esters, ethers, alcohol, and amide are characterized by the presence of oxygen in their structures.

Notably, the carbonyl group common to aldehydes, ketones, carboxylic acids, and esters features a carbon-oxygen double bond. Amines, on the other hand, are compounds containing nitrogen atoms bonded to alkyl or aryl groups, and they do not incorporate oxygen within their functional group.

Hence, A. is the correct option.

The complete question is:

Which functional group does not contain an oxygen atom? Group of answer choices

A) amine

B) amide

C) aldehyde

D) ketone

E) ether

F) ester

G) alcohol

H) carboxylic acid

If the exact outer limit of an isolated atom cannot be measured, what criterion can we use to determine atomic radii? What is the difference between a covalent radius and a metallic radius?

Answers

Answer:

Calculate the atomic radii of two touching or overlapping atoms.

Explanation:

No doubt, we can't find the atomic boundary of a single atom, but when atoms are in the form of pairs it becomes very easy to measure the atomic radii of two and then dividing it by 2 to get an estimate of atomic radius of a single atom.

It is also called as covalent radius which is half of the total inter-nuclear distance between two same bonded atoms (Homo-nuclear).

If two adjacent mettalic ions are joined by such pairing then the same half of the distance between the nucleus is termed as metallic radii.

If the pH of a phosphoric acid (H3PO4) solution is adjusted to 6.50, what is the most abundant species and which is the second most abundant species? For H3PO4 Ka1 = 7.11 x 10-3, Ka2 = 6.34 x 10-8, and Ka3 = 4.22 x 10-13.

Answers

Explanation:

For the given values of [tex]K_{a}[/tex] we will have the values of [tex]pK[/tex] as follows.

As,        [tex]pK_{a} = -log K_{a}[/tex]

Therefore,

     [tex]pK_{a1}[/tex] = 2.15,     [tex]pK_{a2}[/tex] = 7.20

      [tex]pK_{a3}[/tex] = 12.38

Now, at pH 6.50

      [tex]H_{3}PO_{4} \rightarrow H_{2}PO^{-}_{4} + H^{+}[/tex];   [tex]K_{a1}[/tex]

At pH = 2.15;  [tex]H_{3}PO_{4} = H_{2}PO^{-}_{4}[/tex]

       [tex]H_{2}PO^{-}_{4} \rightarrow HPO^{2-}_{4} + H^{+}[/tex];  [tex]K_{a2}[/tex]

At pH 7.20;  [tex]H_{2}PO^{-}_{4} = HPO^{2-}_{4}[/tex]

        [tex]HPO^{2-}_{4} \rightarrow PO^{3-}_{4} + H^{+}[/tex];     [tex]K_{a3}[/tex]

Hence, we can conclude that most abundant species is [tex]H_{2}PO^{-}_{4}[/tex] and the second most abundant species is [tex]HPO^{2-}_{4}[/tex].

PJ’s unknown solid 1) dissolves in hot ethanol, 2) is essentially insoluble in hexane, and 3) is insoluble in cold water, but sparingly soluble in warm water. Outline the recrystallization procedure you would suggest she use here.

Answers

Answer:

1. The solid is dissolved in the hot solvent (ethanol or water);

2. If the impurities are not dissolved, they are separated by filtration;

3. The solution is then cold, and the crystals of the solid are formed;

4. The solution is filtrated and the pure solid is obtained.

Explanation:

The recrystallization is a process to separate impurities from a solid. The solid with the impurities is dissolved in a hot solvent, and, is insoluble in the cold one. But the impurities must be soluble in the cold solvent, or insoluble in the hot one.

If the impurities are soluble in the cold solvent, then, the crystals of the analyte will be removed, and if they are insoluble in the hot solvent, then its crystal is removed first.

So let's assume that the solid is insoluble in hot ethanol, and soluble in hot water. Because its insoluble in hexane, the recrystallization is not possible with it. So the procedure would be:

1. The solid is dissolved in the hot solvent (ethanol or water);

2. If the impurities are not dissolved, they are separated by filtration;

3. The solution is then cold, and the crystals of the solid are formed;

4. The solution is filtrated and the pure solid is obtained.

The exponents in a rate law can be found:
Select the correct answer below:
O from the stoichiometric coefficients of the reaction
O from the molar masses of the compounds
O by experiment only
O none of the above

Answers

Answer:

by experiment only

Explanation:

According to the law of mass action:-

The rate of the reaction is directly proportional to the active concentration of the reactant which each are raised to the experimentally determined coefficients which are known as orders. The rate is determined by the slowest step in the reaction mechanics.

Order of in the mass action law is the coefficient which is raised to the active concentration of the reactants. It is experimentally determined and can be zero, positive negative or fractional.

The order of the whole reaction is the sum of the order of each reactant which is raised to its power in the rate law.

Thus, the exponents in the rate law, the order is determined by experiment only.

Final answer:

Exponents in a rate law can only be determined by experiment, not from the stoichiometric coefficients of the reaction or the molar masses of the compounds.

Explanation:

The exponents in a rate law cannot be determined from the stoichiometric coefficients of the reaction or the molar masses of the compounds. The correct answer is that they can be determined by experiment only. This is because the rate law and its exponents are indicative of the reaction mechanism, or the step-by-step sequence of elementary reactions by which overall chemical change occurs. These can't usually be predicted just from the overall reaction equation (which provides the stoichiometric coefficients) and require experimental data for determination.

Learn more about Rate Law here:

https://brainly.com/question/35884538

#SPJ3

15.2 g of NO2(g) is placed in a sealed 10.0 L flask at room temperature. The total pressure of the system is found to be 0.50 atm. What are the partial pressures of NO2and N2O4are present?

Answers

Answer:

Partial pressure of NO2 = 0.37 atm

Partial pressure of N2O4 = 0.13 atm

Explanation:

Number of moles of NO2 = mass/MW = 15.2g/46g/mole = 0.33 mole

Volume of flask = 10L

1 mole of the mixture of gas contains 22.4L of the gas

10L of the gas contains 10/22.4 mole = 0.45 mole

Total mole of gas mixture in the tank = 0.45 mole

Total pressure of the system = 0.5atm

Partial pressure of NO2 = 0.33mole/0.45mole × 0.5atm = 0.37 atm

Partial pressure of N2O4 = 0.5atm - 0.37atm = 0.13atm

At 39.5 o C, the vapor pressure of pure acetone (MM = 58.08 g/mol) is 400.0 torr. If 15.0 grams of an unknown molecule is dissolved in 485.0 g acetone, the vapor pressure decreases to 361.8 torr. What is the molar mass of the solute?

Answers

Answer: The molar mass of unknown molecule is 157.07 g/mol

Explanation:

The equation used to calculate relative lowering of vapor pressure follows:

[tex]\frac{p^o-p_s}{p^o}=i\times \chi_{solute}[/tex]

where,

[tex]\frac{p^o-p_s}{p^o}[/tex] = relative lowering in vapor pressure

i = Van't Hoff factor = 1 (for non electrolytes)

[tex]\chi_{solute}[/tex] = mole fraction of solute = ?

[tex]p^o[/tex] = vapor pressure of pure acetone = 400 torr

[tex]p_s[/tex] = vapor pressure of solution = 361.8 torr

Putting values in above equation, we get:

[tex]\frac{400-361.8}{400}=1\times\chi_{A}\\\\\chi_{A}=0.0955[/tex]

This means that 0.0955 moles of unknown molecule is present in the solution

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]  

Moles of unknown molecule = 0.0955 moles

Mass of unknown molecule = 15.0 grams

Putting values in above equation, we get:

[tex]0.0955mol=\frac{15.0g}{\text{Molar mass of unknown molecule}}\\\\\text{Molar mass of unknown molecule}=\frac{15.0g}{0.0955mol}=157.07g/mol[/tex]

Hence, the molar mass of unknown molecule is 157.07 g/mol

What is penetration? How is it related to shielding? Use the penetration effect to explain the difference in relative orbital energies of a 3p and a 3d electron in the same atom.

Answers

Answer: penetration is the ability of an electron in a given orbital to approach the nucleus closely. Shielding refers to the fact that core electrons reduce the degree of nuclear attraction felt by the orbital electrons. Shielding is the opposite of penetration. The most penetrating orbital is the least screening orbital. The order of increasing shielding effect/decreasing penetration is s<p<d<f.

Explanation:

The order of penetrating power is 1s>2s>2p>3s>3p>4s>3d>4p>5s>4d>5p>6s>4f....

Since the 3p orbital is more penetrating than the 3d orbital, it will lie nearer to the nucleus and thus possess lower energy.

An experiment calls for you to use 100 mL of 0.25 M HNO3 solution. All you have available is a bottle of 3.4 M HNO3. How many milliliters of the 3.4 M HNO3 solution do you need to prepare the desired solution?

Answers

Answer: 7.35mL

Explanation:

C1 = 3.4M

V1 =?

C2 = 0.25M

V2 = 100mL

C1V1 = C2V2

3.4 x V1 = 0.25 x 100

V1 = (0.25 x 100) /3.4

V1 = 7.35mL

Final answer:

To prepare the desired 100 mL of 0.25 M HNO3 solution, approximately 7.35 mL of the 3.4 M HNO3 stock solution is required, with the remaining volume filled with water for dilution.

Explanation:

To prepare 100 mL of a 0.25 M HNO3 solution from a 3.4 M HNO3 stock solution, we use the dilution formula M1V1 = M2V2, where M1 is the concentration of the stock solution, V1 is the volume of the stock solution needed, M2 is the desired concentration, and V2 is the final volume of the solution.

Here, M1 = 3.4 M, M2 = 0.25 M, and V2 = 100 mL. We need to find V1. Plugging the values into the equation:

V1 = (M2 x V2) / M1

V1 = (0.25 M x 100 mL) / 3.4 M

After calculating, we find that V1 ≈ 7.35 mL. Therefore, you need approximately 7.35 mL of the 3.4 M HNO3 stock solution to prepare the desired 100 mL of 0.25 M HNO3 solution. The rest of the volume up to 100 mL should be filled with distilled water to achieve the correct dilution.

Other Questions
Cultural context would be especially important for a reader trying tounderstand theOA. values of the characters. AOB. author's use of onomatopoeia.C. likeability of a character.OD. sequence of a plot's events. . In most cases, a volunteer must review photo identification for every taxpayer to deter the possibility of identity theft. True False What sentence(s) is/are true when we talk about equipotential lines? a. Electric potential is the same along an equipotential line b. Work is necessary to move a charged particle along these lines. c. They are always perpendicular to electric field lines d. They are always parallel to electric field lines As part of a proactive TNA approach, analysts at McKee Paper factory are attempting to determine whether the factory needs to employ more workers to meet ISO 9000 standards. This means that the analysts are conducting _______ analysis.A. organizationalB. personC. operationalD. performance Green design, sustainable packaging, waste management, and energy efficiency are aspects of the ______ segment of the general environment that companies have sought to address with environmental sustainability initiatives. Calculate the distanceBenjamin rideshis scooter if he rides 3/5mileeach dayfor 10 days. How is a solid substance affected by adding heat energy to it?O A) Its mass increases.OB) Its temperature decreases.OC) The motion of its particles increases.OD) The motion of its particles decreases. ASAP Please help, I am asking this question since last week. WILL MARK BRAINLIESTWrite a 100-word informative essay about the role of women on the frontier. Evaluate the contributions of one particular woman. Combine the like to simplify the expression: -5y + 12 + 8y 6 2 = The second metaphor in Psalm 23 compares God to a generous host. (In the ancient Middle East, it was a sign of hospitality to anoint a guest's head and dusty feet with oil.) How does the speaker extend this metaphor of God as a gracious host, with the speaker as his guest? The population of lengths of aluminum-coated steel sheets is normally distributed with a mean of 30.05 inches and a standard deviation of 0.2 inches. What is the probability that a sheet selected at random from the population is between 29.75 and 30.5 inches long? what is uno, a a card game b history c nothing d a black person Read the following two sentences. (1) Gre eng rass gr ow son themoun tain. (2) Green g explain why the second sentence makes sense immediately, but the first sentence does not? grass grows a) The first sentence is encoded, and the second sentence is decoded between each word d) We read the first sentence as practice and the second sentence as real. by We group letters of a given word together because there are no spaces between the letters, and we perceive words because there are spaces c We learn the first sentence subliminaly which lets us translate the meaning of the second sentence quicker QUESTION 8 or vestitiar sese oortributes to our ability to ) distinguish the fat conbent of food b feel pain c) maintain balance and body posture d) regulate bodty sempernture QUESTION What is described by the concept of perception? a) nterpretation of sensations is intuurced by avalable knowledge, experences, and th rts b) how sensory information interpreted and consciously experienced c) the change in stimulus detection as a function of current mental state Od) what happens when sensory information is detected by a sensory receptor QUESTION 10 What does the place thecry of pitch perception suggest? a) Different amplitudes of the basilar membrane are sensitive to sounds of different waves b) Dilerent portions of the baslar membrane are sensitive to sounds of different frequencies O c) Different portions of the ear are sensitive to sounds of different decibels d) Different sections of the cochlea are sensitive to sounds of different frequencies Chek Save and Subrnit to save and submit. Click Sove All Ansivers to save all ansuers 2. Alicia makes the statement that every time she eats chocolate, she gets acne. By ignoring the possibility that there may be another factor that causes Alicia to eat chocolate and which also causes her acne, Alicia is committing the:a. fallacy that association is causationb. mistake of rejecting a null hypothesisc. fallacy of segmentationd. fallacy of compositione. mistake of ignoring secondary effects To make a soup, 2 cups of chicken broth are needed for each 1/4 cup of dried lentils. How many cups of chicken broth are needed if 2 1/4 cups of dried lentils are used? When a certain basketball player takes his first shot in a game he succeeds with probability 1/2. If he misses his first shot, he loses confidence and his second shot will go in with probability 1/3. If he misses his first 2 shots then his third shot will go in with probability 1/4. His success probability goes down further to 1/5 after he misses his first 3 shots. If he misses his first 4 shots then the coach will remove him from the game. Assume that the player keeps shooting until he succeeds or he is removed from the game. Let X denote the number of shots he misses until his first success or until he is removed from the game. a. Calculate the probability mass function of X.b. Compute the expected value of X. Determine whether a figure with the given vertices is a parallelogram. A(4,5), B(-7,-10), C(-4,-9), D(7,6) distance and slope formula Suppose 4/5 of a different box of oranges weighs 8 pounds how many pounds of oranges are in the full box The Properties dialog boxhelps designers precisely control elements in DTP layoutsprovides the designer's name and organizationenables designers to resize objectsoffers a way for designers to enter text into a layout Debt Book Equity Market Equity Operating Income Interest Expense Firm A 500 300 400 100 50 Firm B 80 35 40 8 7 1. What is the market debt-to-equity ratio of each firm? 2. What is the book debt-to-equity ratio of each firm? 3. What is the interest coverage ratio of each firm? 4. Which firm will have more difficulty meeting its debt obligations?