How many c atoms are in 2 mol of sucrose?

To precipitate all the bromide ions present in the final solution of KBr, 12.061g of silver nitrate is needed. The calculation is based on molarity, volume and reaction stoichiometry.

The first step to finding the answer is to calculate the amount of KBr in each solution. The amount of solute in a solution is given by the formula: Volume (L) × Molarity (M). So for the 35.0 mL sample of 1.00 M KBr, that would be 0.035 L × 1.00 mol/L = 0.035 moles of KBr. For the 60.0 mL sample of 0.600 M KBr, the calculation is 0.060 L × 0.600 mol/L = 0.036 moles of KBr. Thus, a total of 0.035 + 0.036 = 0.071 moles KBr is present in the final solution.

The reaction between KBr and silver nitrate (AgNO3) is a one-to-one reaction: KBr + AgNO3 → AgBr + KNO3. Therefore, 0.071 moles of AgNO3 are required to precipitate all the bromide ions. The molar mass of AgNO3 is approximately 169.87 g/mol, therefore the total mass of AgNO3 needed is 0.071 moles × 169.87 g/mol = 12.061 g.

Hence, 12.061 g of silver nitrate are required to precipitate out silver bromide in the final solution.

https://brainly.com/question/33416260

#SPJ12

The amount of silver nitrate required is approximately 10.53 grams. This is calculated by first determining the total moles of KBr in the solution and then using the 1:1 stoichiometry of the reaction to find the equivalent moles (and thus mass) of AgNO3 required.

This is a stoichiometry problem that involves determining the amount of silver nitrate needed to precipitate out silver bromide in a solution. First, we need to determine the number of moles of KBr in the final solution. The original solutions have volumes of 35.0 ml and 60.0 ml and molarities of 1.00 M and 0.600 M respectively, so the number of moles of KBr is (35.0 ml x 1.00 mol/L) + (60.0 ml x 0.600 mol/L) = 0.062 mol. After evacuating some water, the volume decreases to 50.0 ml.

Now, since silver nitrate and potassium bromide react in a 1:1 ratio to form silver bromide, the moles of silver nitrate needed will be equal to the moles of KBr. Thus, we need 0.062 moles of AgNO3. The molecular weight of AgNO3 is 169.87 g/mol, so the mass of AgNO3 needed is (0.062 mol) x (169.87 g/mol) = 10.53 g. So, you will need about 10.53 grams of silver nitrate to precipitate out silver bromide in this solution.

https://brainly.com/question/30215297

#SPJ2

(a) We know that work is the product of Force and Distance so: (in this case Distance is negative since going down so –d)

work = force * distance

work = M * (g - g/4) * -d

work = -3Mgd/4 

(b) The work by the weight of the block is simply:

work = Mgd 

(c) The kinetic energy is simply equivalent to the net work, therefore:

KE = net work

KE = Mgd/4 

(d) The velocity is:

v = √(2*KE/M)

Plugging in the value of KE from c:

v = √(2*Mgd / 4M)

v = √(gd / 2) 

Filter paper may prematurely clog, glassware could crack, volatile components may be lost, and vapor release can occur if a hot solution is vacuum filtered.

If a hot solution is filtered by vacuum filtration, several problems might arise:

1. Glassware Damage: The sudden temperature change when hot solution comes into contact with cold filtration equipment can cause glassware to crack or shatter, leading to potential injuries and loss of materials.

2. Reduced Filtration Efficiency: Hot solutions can cool rapidly during filtration, causing the solute to crystallize or solidify before the filtration is complete. This can lead to clogged filter paper or reduced filtration efficiency.

3. Loss of Volatile Components: Some volatile components in the hot solution may evaporate during vacuum filtration, altering the composition of the filtrate and potentially leading to inaccurate results.

4. Vapor Release: The application of vacuum pressure to a hot solution can lead to the rapid release of vapor, which can be hazardous if not properly managed, posing a risk of burns or exposure to harmful substances.

Learn more about vacuum filtration here:

https://brainly.com/question/31839425

#SPJ12

Problems that may arise from filtering a hot solution via vacuum filtration include rapid vaporization, potential damage to the filtration equipment, altered interactions between the solution and the filter, inefficient filtration, and potential negative effects on heat-sensitive components of the solution.

If a hot solution is filtered by vacuum filtration, several problems could arise. One issue is that the increased temperature might result in rapid vaporization, causing the solution to bump and lead to an incomplete or inefficient filtration. Another problem could be the conductivity of heat from the hot solution could damage the filtration setup. For example, materials such as the membrane filters and flasks used in filtration may not withstand high temperatures, causing them to crack or break.

Furthermore, heat can modify the interactions between the solution and the membrane filter. The reduced viscosity might speed up the flow through the filter, which can lead to a drastic decrease in filtration efficiency, and making it hard to separate the desired products. Also, depending on the nature of the substance being filtered, a hot solution could impact negatively its heat-sensitive components, rendering the filtered solution unfit for the intended purpose. Therefore, it’s best to allow a hot solution to cool before vacuum filtration, except the membrane filters are designed to handle such conditions.

https://brainly.com/question/31827193

#SPJ11

To solve this, we need the solubility constant for Hg2Cl2, which is:

Ksp = 1.4 x 10^-18

The ionic formula would be:

Hg2Cl2(s)  --->  Hg2 2+(aq) + 2Cl-(aq)

 

Therefore the total amounts of ions produced = x M Hg2 2+ and 2x M Cl- 

The formula for Ksp in this case is:

Ksp = [Hg2 2+] [Cl-]^2

1.4 x 10^-18 = (x) * (2x)^2

1.4 x 10^-18 = 4x^3
x = 7.0 x 10^-7 M = [Hg2 2+]

2x = 14 x 10^-7 M = [Cl-]

Answer:

the answer is a

Explanation:

can i pls get brainliest

The ionic compound formed from Fe3+ and Cl- is FeCl3, called iron(III) chloride. For dissociation in water, FeCl2 separates into Fe2+ and Cl-. The complete ionic equation for the reaction between FeCl2 and AgNO3 includes all ions present with AgCl precipitating out, and the net ionic equation shows just the ions involved in the formation of the precipitate.

Naming the Ionic Compound Formed from Fe3+ and Each Anion

To name the ionic compound formed from Fe3+ and an anion, you follow a set of rules. Firstly, you write the name of the cation including the charge in roman numerals enclosed in small brackets, followed by the name of the anion. For Fe3+, we use the name Iron(III), and for a chloride ion (Cl-), the name is chloride. The compound's formula is FeCl3, which is called iron(III) chloride. Remember that the subscript in the chemical formula indicates the number of anions needed to balance the charge of the cation.

Compound Dissociation in Water

To write a balanced equation for how an ionic compound like FeCl2 dissociates in water, you would represent it as follows:

FeCl2(s) -> Fe2+(aq) + 2 Cl-(aq)

This shows the separation of the ionic compound into its individual ions when dissolved in water.

Complete Ionic Equation for FeCl2 and AgNO3

The complete ionic equation for the reaction between FeCl2(aq) and AgNO3(aq), consulting solubility rules, would look like this:

Fe2+(aq) + 2 Cl-(aq) + 2 Ag+(aq) + 2 NO3-(aq) -> 2 AgCl(s) + Fe2+(aq) + 2 NO3-(aq)

Net Ionic Equation for FeCl2 and AgNO3

The net ionic equation, after removing the spectator ions, for the same reaction would be:

2 Cl-(aq) + 2 Ag+(aq) -> 2 AgCl(s)

Answer : The correct option is, (C) a single component that can’t be separated.

Explanation :

Substance : It is the pure form of matter or we can say that it is a matter that contains only one type of molecule of atom. It can not be separated by physical process.

For example : Water is a substance.

Mixture : It is a combination of different type of atoms or molecules and it is an impure form.

For example : Sodium chloride with water is a mixture.

Hence, the correct option is, (C) a single component that can’t be separated.

The mass of a sulfur-32 atom is approximately 8.01 x 10^-23g. There are approximately 5.97 x 10^23 neutrons in one gram.

The mass of a sulfur-32 atom, which is a type of nuclear atom, can be determined by summing the masses of its protons, neutrons, and electrons. Since a sulfur-32 atom has 16 protons, 16 neutrons, and 16 electrons, and given that the mass of a proton or neutron is approximately 1.67 x 10^-24 g, the total mass of the atom would be 48 x 1.67 x 10^-24g, which equals approximately 8.01 x 10^-23g.

Furthermore, to determine the number of neutrons that would equal a mass of one gram, we divide one gram by the mass of a single neutron. This results in approximately 5.97 x 10^23 neutrons.

https://brainly.com/question/32442642

#SPJ6

Final answer:

Heterogeneous mixtures can be separated by physical means such as filtration, which removes solids from liquids, or distillation, which separates components based on boiling points. Chromatography is another method used for separating complex mixtures like inks based on differential adsorption.

Explanation:

Heterogeneous mixtures are characterized by a non-uniform composition and can often be separated by simple physical means. One common method of separation is filtration, which uses a barrier to separate solid particles from a liquid. For instance, sand in water can be separated by passing the mixture through filter paper, which allows water to pass through while retaining the sand particles.

Another separation technique is called distillation, which relies on the differences in boiling points of substances to separate a homogeneous mixture into its components. For example, when distilling a saltwater solution, the water, being more volatile, evaporates first and is collected after condensation, leaving the salt behind.

Moreover, chromatography is a technique used to separate mixtures based on the differential adsorption of compounds to a medium. It is often employed to separate complex mixtures such as inks, where different ink components travel at various speeds through a medium, resulting in separation.

The average atomic mass of lead, will be approximately 207.2 g/mol.

To calculate the approximate atomic mass of lead using the isotopic masses and their relative abundances. The atomic mass is a weighted average based on the abundances of each isotope.

For lead (Pb), the calculation using given isotopes would look like this:

Thus, the approximate atomic mass of Pb is 207.2 g/mol.

The complete question is:

The four isotopes of lead are shown below, each with its percent by mass abundance and the composition of its nucleus. using these data, calculate the approximate atomic mass of lead.  82p 122n 1.37% 82p 124n 26.26% 125n 20.82 82p 126n 51.55% 24 Mass # 81 37 6.

The turbine in a turbojet engine drives the compressor, converting exhaust gas energy into mechanical work to compress incoming air, a critical step in the jet propulsion system.

The main purpose of the turbine in a turbojet engine is to drive the compressor. In a turbojet engine, the turbine converts some of the kinetic and thermal energy of the exhaust gases into mechanical work, which is then used to power the compressor at the front of the engine. The compressor's function is to compress the incoming air, increasing its pressure and temperature, before it enters the combustion chamber where the air-fuel mixture ignites. This cycle is an essential part of the jet propulsion system and follows principles similar to those of heat engines and internal combustion engines which utilize heat transfer, expansion, and compression processes to generate power.

Answer:

Hydrogen fuel cells create less pollution.

Burning fossil fuels relies on outdated devices and technology.

Hydrogen fuel cells have a higher energy efficiency.

Explanation:

Hello,

The first option - Hydrogen fuel cells create less pollution - is selected due to the fact that fuel cell consists of an electrolyte sandwiched  between two electrodes, an anode and a cathode, so electrical energy is used instead of the burning of a fossil fuel which gives off pollutant gases such as carbon, nitrogen and sulfur oxides.

The second option - Burning fossil fuels relies on outdated devices and technology - is selected due to even when new technologies are being developed to enhance the extraction of energy from the combustion of fossil fuels, they are based on the same idea, combustion which contributes to pollution.

The third option - Hydrogen fuel cells have a higher energy efficiency - is selected because a typical combustion process converts the 35% of the total fuel into usable energy meanwhile the hydrogen fuel cells reach the up to the 60% or more.

Best regards.

To calculate the molality of oxygen in water under a partial pressure of 0.20 atm, apply Henry's law with the given constant (773 atm mol⁻¹kg H₂O), resulting in a molality of 154.6 mol kg⁻¹.

The question asks to calculate the molality of oxygen in water at a specific temperature (25 °C) and partial pressure, using the given Henry's law constant. To find the molality, we need to apply Henry's law, which states that the concentration of a dissolved gas in a liquid is directly proportional to the partial pressure of that gas above the liquid.

Hence, the formula for Henry's law is:

C = kP

where:

C is the molar concentration of the dissolved gas (molality in this case),

k is the Henry's law constant,

P is the partial pressure of the gas above the liquid.

Using the given Henry's law constant for oxygen in water (773 atm mol⁻¹kg H₂O) and the partial pressure of oxygen (0.20 atm), we can solve for C as follows:

C = kP

C = 773 atm mol⁻¹kg H₂O × 0.20 atm

C = 154.6 mol kg⁻¹

So, the molality of oxygen in water under a partial pressure of 0.20 atm is 154.6 mol kg⁻¹.

beryllium and magnesium is your answer

The two elements which have the most similar chemical properties are: Beryllium and Magnesium.

Discussion:

The two elements are present in the Alkali earth metals group of the periodic table.

They are both characterized by the possession of 2 Valence electrons on their outermost shell and as such are able to undergo similar chemical reactions.

Ultimately, beryllium and magnesium have the most similar chemical properties.

Read more on alkaline earth metals;

https://brainly.com/question/131901

Answer : The density of an object is 1.2 g/mL

Explanation :

Density : It is defined as the mass contained per unit volume.

Formula used :

[tex]Density=\frac{Mass}{Volume}[/tex]

Given :

Mass of object = 0.03 kg = 30 g

conversion used : (1 kg = 1000 g)

Volume occupied by object = 25 mL

Now put all the given values in the above formula, we get :

[tex]Density=\frac{30g}{25mL}=1.2g/mL[/tex]

Therefore, the density of an object is 1.2 g/mL

Answer:The pH of the water is 7.

Explanation;

The pH of the solution is defined as negative logarithm of [tex]H^+[/tex] or hydronium ions ions in the solution.

[tex]pH=-\log[H^+][/tex]

So, [tex]H^+[/tex] concentration of water = [tex]1.0\times 10^{-7} m[/tex]

[tex]pH=-\log[1.0\times 10^{-7}]=7[/tex]

The pH of the water is 7.

6.11×10²² oxygen atoms are present in 4.24 grams of ZnCO₃. The molar mass of ZnCO₃ is 125.34 g/mol.

Given information:

The molecular weight of ZnCO₃ = 125.34 g/mol

Number  of oxygen atoms = 6.11×10²²

1 mole of ZnCO₃ → 3 moles of oxygen atoms

1 mole of ZnCO₃ → atoms

125.34 g/mol ZnCO₃ → 3 × 6.023 × 10²³ atoms

Mass is a measure of the amount of matter in an object. It is a fundamental property of matter, and it does not change with the object's location or motion. The SI unit of mass is the kilogram (kg).

Now, the mass of ZnCO₃ is:

[tex]\rm Mass = \frac{6.11 \times 10^{22} \times 125.4}{3 \times 6.023 \times 10^{23}}\\\rm Mass = \frac{6.11 \times 10^{22} \times 125.4\times 10^{-23}}{3 \times 6.023 }\\Mass = \frac{766.194}{18.069}\times10^{-1}\\Mass = \frac{76.62}{18.069}\\[/tex]

Mass = 4.24 grams

Therefore, the mass of ZnCO₃ is 4.24 grams which contains 6.11×10²² oxygen atoms.

Learn more about molar mass, here:

https://brainly.com/question/31545539

#SPJ12

To find the mass of ZnCO3 that contains 6.11×10^22 O atoms, we can calculate the molar mass of ZnCO3, use it to convert the number of oxygen atoms into moles, and then calculate the mass of ZnCO3. The mass of ZnCO3 is 12.73 g.

To find the mass of ZnCO3 that contains 6.11×10^22 O atoms, we need to calculate the molar mass of ZnCO3 and then use it to convert the number of oxygen atoms into moles. Finally, we can use the molar mass of ZnCO3 to calculate the mass of the compound.

The molar mass of ZnCO3 is calculated by summing the atomic masses of its constituent elements: Zn (65.38 g/mol), C (12.01 g/mol), and 3 O atoms (16.00 g/mol).

Molar mass of ZnCO3 = 65.38 g/mol + 12.01 g/mol + 3 * 16.00 g/mol = 125.38 g/mol

Now, let's calculate the number of moles of O atoms:

Number of moles of O atoms = (6.11×10^22) / (6.022×10^23)

= 0.1015 mol

Finally, we can calculate the mass of ZnCO3:

Mass of ZnCO3 = (0.1015 mol) * (125.38 g/mol)

= 12.73 g

https://brainly.com/question/30096298

#SPJ3

Answer : The number of moles of phosphorous are 354 moles.

Explanation :

The formula of given compound is, [tex]P_4O_{10}[/tex]

In [tex]P_4O_{10}[/tex] compound, there 4 moles of phosphorus and 10 moles of oxygen.

As we are given that the moles of [tex]P_4O_{10}[/tex] is 88.5 mole. Now we have to determine the number of moles of phosphorous (P).

As, 1 mole of [tex]P_4O_{10}[/tex] has 4 moles of phosphorous

So, 88.5 mole of [tex]P_4O_{10}[/tex] has [tex]4\times 88.5=354moles[/tex] of phosphorous

Therefore, the number of moles of phosphorous are 354 moles.

88.5 mol of [tex]P_4O_{10}[/tex] contains 354 moles of P. A mole is a unit of measurement used in chemistry to represent how much of a substance is present.

In chemistry, a mole is a unit of measurement that is used to express how much a material is present. It is described as the quantity of a substance that has exactly the same number of atoms, molecules, or ions as there are in exactly 12 grammes of pure carbon-12. The mole idea is essential to chemistry because it enables researchers to connect a substance's mass to its particle count. The idea of molar mass, or the mass of one mole of a substance, is used to describe this relationship. The unit of molecular mass is grammes per mole (g/mol).

88.5 mol [tex]P_4O_{10}[/tex] × (4 mol P / 1 mol P4O10) = 354 mol P

88.5 mol of [tex]P_4O_{10}[/tex] contains 354 moles of P

To know more about mole, here:

https://brainly.com/question/29724957

#SPJ6