Help please!

What is the fundamental (smallest) unit of charge possible and where does it come from?

Answer:

784 N.

Explanation:

The expression for the Normal reaction acting on a body inside an elevator that is moving upward is given as

R = m(g+a)................. Equation 1

Where R = normal reaction, g = acceleration due to gravity, a = acceleration, m = mass .

Given: m = 70 kg, a = 2 m/s²

Constant: g = 9.8 m/s²

Substitute into equation 1

R = 70(2+9.2)

R = 70(11.2)

R = 784 N.

Hence the normal force = 784 N.

Answer: c*m on now

Explanation:

u dumb b***h

Answer:

The amplitude of wave increases by a factor of 20

Explanation:

The Sound level in decibel β is described as

[tex]\beta =(10dB)log(\frac{I}{I_{o} })[/tex]

Where I₀=10⁻¹²W/m² is reference intensity

Suppose β₁ is initial sound intensity and β₂ is final sound intensity.Therefore the change in sound intensity is given as

β₁-β₂=26.0 dB

[tex](10dB)log(\frac{I_{2} }{I_{o}} )-(10dB)log(\frac{I_{1} }{I_{o}} )=26.0dB\\(10dB)[log(\frac{I_{2} }{I_{o}} )-log(\frac{I_{1} }{I_{o}} )]=26.0dB\\log(\frac{\frac{I_{2}}{I_{o}} }{\frac{I_{1}}{I_{o}} })=\frac{26dB}{10dB}\\ log\frac{I_{2}}{I_{1}}=2.6\\ \frac{I_{2}}{I_{1}}=10^{2.6}[/tex]

The intensity of sound is directly proportional to the amplitude of wave squared

So

I∝A²

[tex]\frac{I_{1}}{I_{2}}=(\frac{A_{1}}{A_{2}})^{2}\\ (\frac{A_{1}}{A_{2}})=\sqrt{(\frac{I_{1}}{I_{2}})}\\ (\frac{A_{2}}{A_{1}})=\sqrt{(\frac{I_{2}}{I_{1}})}\\ (\frac{A_{2}}{A_{1}})=\sqrt{10^{2.6} }\\ (\frac{A_{2}}{A_{1}})=20[/tex]

Therefore the amplitude of wave increases by a factor of 20

Answer:

Fraction of the nickel atoms removed = 1.02 x 10 raised to power -11

Explanation:

The detailed and step by step derivation with appropriate substitution is as shown in the attached files.

To calculate the fraction of nickel atoms' electrons needed to support the weight of a nickel coin when placed 1 meter above it, we use the weight of the coin and Coulomb's law to determine the necessary charge. This charge divided by the elementary charge gives us the number of electrons needed, providing the fraction when compared to the total number of electrons in the coin.

To calculate what fraction of a nickel coin's electrons would need to be removed and placed 1.00 m above it to support its weight, we should use the concept of electrostatic force. We'll begin by determining the weight of the coin in newtons (since weight is a force). Next, we will determine the number of moles of nickel in the coin using its atomic mass, and from that, calculate the number of nickel atoms. With the atomic structure of nickel, we find the total number of electrons in the coin. Using Coulomb's Law, we can equate the electrostatic force due to the separated charges to the weight of the coin to solve for the fraction of electrons needed.

First, we need to convert the mass of the coin into weight using the formula weight (W) = mass (m) * gravity (g). Since the coin has a mass of 5.00 g (which is 0.005 kg) and the gravitational constant is approximately 9.8 m/s², the weight W is 0.049 N. Next, we use the atomic mass of nickel (58.7 u) to find the number of moles in 5.00 g of nickel. This number is given by the mass of the coin divided by the atomic mass of nickel. The number of atoms is the number of moles times Avogadro's number (approximately 6.022 × 10²³ atoms/mole).

Therefore, the total number of electrons in the 5.00 g of nickel is the number of atoms times the number of electrons per atom, which for nickel is 28. To support the coin at a distance of 1.00 m, the electrostatic force (Felectrostatic) should be equal to the weight of the coin, or 0.049 N. Using Coulomb's law, Felectrostatic = k * |q₁ * q₂| / r², where k is Coulomb's constant (approximately 8.988 × 10⁹ N·m²/C²), q₁ and q₂ represent the charges, and r is 1.00 m in our case. By solving this equation for q (assuming both q₁ and q₂ would be the same since it's the same electrons that have been separated), we can find the necessary charge to create a force equal to the weight of the coin.

After finding this charge, we divide by the elementary charge (approximately 1.602 × 10⁻¹⁹ C) to get the number of electrons needed. Dividing this number by the total number of electrons in the coin gives us the fraction of the nickel atoms' electrons needed to support the weight of the coin.

Answer:

the launched cannonball

Explanation:

In a cannon firing a cannonball, while the total momentum is conserved, the cannonball has greater kinetic energy than the recoiling cannon due to its higher velocity and the relationship between kinetic energy and velocity.

The subject of this question is Physics, specifically dealing with momentum conservation and kinetic energy in the context of a cannon firing a cannonball. The law of conservation of momentum states that the total momentum before and after an event is constant if no external forces are acting on the system. When a cannon fires a cannonball, the momentum is conserved, meaning the cannon and the cannonball together possess the same total momentum post-explosion as the stationary cannon had before firing (which is zero). Though both the cannon and the cannonball have momentum of equal magnitude but opposite direction, the distribution of kinetic energy between them is not equal.

Kinetic energy, which depends on both mass and the square of velocity, will not be conserved in the same way as momentum. The kinetic energy is given by the relation KE = (1/2)mv2. Considering the masses of the two objects, a lighter cannonball and a heavier cannon, if both the cannon and cannonball have the same magnitude of momentum, the cannonball will have a much higher velocity due to its smaller mass. Since kinetic energy depends on the square of velocity, the cannonball, with a higher velocity, will have greater kinetic energy than the heavier, slower-moving cannon. Thus, even though momentum is conserved, the kinetic energies will differ, with the cannonball gaining more kinetic energy than the recoiling cannon.

In summary, the law of conservation of energy applies, but kinetic energy is not conserved like momentum. The chemical energy stored in the gunpowder is converted into heat and the kinetic energy of both the cannon and the cannonball. Although the cannon has a larger mass, it will recoil with less velocity than the fired cannonball, which means the cannonball will have a greater kinetic energy.

Answer:

While the Applied Force (force exerted) is decreasing, the velocity is decreasing

Explanation:

From Newton's second law of motion, which states that the rate of change of linear momentum is directly proportional to the applied force, and takes place in the direction of the applied force.

Momentum (P) = MV

Thus, F ∝ MV/t

where;

F is the applied force

M is the mass of the object

V is the velocity of the object

From the equation above, force is directly proportional to the velocity of the refrigerator (F∝V). That is, as the applied force is decreasing, the velocity is decreasing and vice versa.

Therefore, while the Applied Force (force exerted) is decreasing, the velocity is decreasing.

Answer:

on mastering physics its b.increasing

Explanation:

Answer:

2.5m

Explanation:

PE = MGH

50 = 2*10*H

50 = 20H

H = 2.5m

Answer:

[tex]\displaystyle V_l=V\ \frac{\rho_o -\rho_w }{\rho_l-\rho_w}[/tex]

Explanation:

Density

It's a physical magnitude that relates the mass of an object with the volume it occupies. The formula is

[tex]\displaystyle \rho = \frac{m}{V}[/tex]

Equivalently

[tex]m=\rho V[/tex]

The density of water is 1 gr/ml, 1 Kg/lt, 1000 kg/m^3 or any equivalent unit.  

Assume the wood sphere has a volume V and a density [tex]\rho_w[/tex], thus

[tex]m_w=\rho_w V[/tex]

A hole is to be drilled inside the wood so it means part of its volume will be filled with lead, which mass will be

[tex]m_l=\rho_l V_l[/tex]

The volume of wood is the total volume V minus the (unknown) volume of lead, thus

[tex]V_w=V-V_l[/tex]

The total mass of the modified sphere is

[tex]m_s=m_w+m_l=\rho_w V_w+\rho_l V_l[/tex]

Substituting Vw

[tex]m_s=m_w+m_l=\rho_w (V-V_l)+\rho_l V_l[/tex]

Operating

[tex]m_s=m_w+m_l=\rho_w V-\rho_w V_l+\rho_l V_l[/tex]

[tex]m_s=m_w+m_l=\rho_w V+ V_l(\rho_l -\rho_w)[/tex]

The total volume of the sphere doesn't change, which means  

[tex]V_s=V[/tex]

The new density of the modified sphere is

[tex]\displaystyle \rho_s = \frac{m_s}{V}[/tex]

[tex]\displaystyle \rho_s = \frac{\rho_w V+ V_l(\rho_l -\rho_w)}{V}[/tex]

This density must be equal to the density of water [tex]\rho_o[/tex]

[tex]\displaystyle \rho_o = \frac{\rho_w V+ V_l(\rho_l -\rho_w)}{V}[/tex]

Operating and solving for vl

[tex]\displaystyle V_l=\frac{\rho_o V-\rho_w V}{\rho_l-\rho_w}[/tex]

Or equivalently

[tex]\displaystyle \boxed{V_l=V\ \frac{\rho_o -\rho_w }{\rho_l-\rho_w}}[/tex]

The equation would be enough for the volume of wood to keep the sphere neutrally buoyant would be [tex]Vt= Vp0-Pw/Pt-Pw[/tex]

The formula for the physical magnitude is p= m/v

Given that the density of water is 1 gr/ml, 1 Kg/lt, 1000 kg/m^3 or any equivalent unit.  

We would assume the wood sphere has a volume V and a density Pw,

[tex]Mw= PwV[/tex]

Since a hole is to be drilled inside the wood so it means part of its volume will be filled with lead, the mass will be [tex]Mt= PtVt[/tex]

The volume of wood is the total volume V minus the (unknown) volume of lead, thus

[tex]Vw= V- Vt[/tex]

Hence, after further evaluation, the density would be [tex]Vt= V Po- Pw/Pt- Pw[/tex]

Read more about density here:

https://brainly.com/question/1354972

Answer: Hello! Apparently, your question is incomplete. Those were sentences in which you had to complete with missing information, so here we go:

1- Our entire solar system orbits around the center of the MILKY WAY GALAXY about once every 230 million years.

2- The Milky Way and Andromeda galaxies are among a few dozen galaxies that make up our LOCAL GROUP.

3 - The Sun appears to rise and set in our sky because Earth ROTATES once each day.

4 - You are one year older each time Earth ORBITS about the Sun.

5 - On average, galaxies are getting farther apart with time, which is why we say our UNIVERSE is expanding.

6 - Our SOLAR SYSTEM is moving toward the star Vega about 70,000 km/hr.

Answer:

1.3m/s

Explanation:

Data given,

Mass,m=1.0kg,

Amplitude,A=0.10m,

Frequency,f=2.0Hz.

From the equation of a simple harmonic motion, the displacement of the object at a given time is define as

[tex]x=Acos\alpha \\[/tex]

we can express the velocity by the derivative of the displacement,

Hence

[tex]V=-Awsin\alpha \\[/tex]

at equilibrium, the velocity becomes

[tex]V=wA\\w=2\pi f[/tex]

Hence if we substitute values we arrive at

[tex]V=2\pi fA\\V=2\pi *2*0.1\\V=1.3m/s[/tex]

Answer:

haha lol

Explanation:

sorry but i dont know this

Answer:

Explanation:when a tape is moved past a small coil of wire due to a non uniform field,the voltage is induced in the coil. A practical example of this is a tape recorder in which a moving tape produces sound energy..

The phenomenon in question describes charging by induction. The presence of a negative charge induced a redistribution of charges in two uncharged metal balls, and grounding allowed excess charges to move away. The two uncharged balls ended up positively charged after the negatively charged ball was removed and the balls separated.

The subject of this question relates to the concept of charging by induction, a common concept in Physics. When the third ball, which carries a negative charge, was brought near Ball Y and X, it caused the redistribution of charges in both balls due to the phenomenon of induction. As Ball Y was grounded, it provided a path for the electric charges to move away, thus becoming neutral again. However, Ball X retained the overall net positive charge due to the negative charge being near earlier.

After the ground wire is disconnected and the negatively charged ball removed, Ball Y and X still have net positive charges. This happens because the negative charge in the vicinity induced a redistribution of charges earlier, and when they were removed, there weren't any free charges nearby to neutralize this charge.

The separation of Ball Y and X made their charges apparent. Both balls are left with a positive charge as the excess electrons moved to the earth during grounding.

https://brainly.com/question/10254645

#SPJ2

Ball Y ends up with a positive charge, and Ball X with a negative charge due to induction caused by a nearby negatively charged ball. Grounding Ball Y neutralizes any negative charge, leaving it positively charged. The scenario exemplifies charging by induction.

Charging by Induction

This question deals with the concept of charging by induction in physics. Let's break down the scenario step-by-step:

To address the specific parts of the question:

a. Charges on Each Ball

Ball Y will have a positive charge, and Ball X will have a negative charge. This distribution occurs due to the transfer of electrons from Y to X when the negatively charged third ball is near.

b. How the Balls Get These Charges

The negatively charged third ball induces a redistribution of charges in Balls Y and X. Electrons are repelled from Ball Y towards Ball X, leaving Ball Y positively charged and Ball X negatively charged.

c. Effect of Grounding Ball Y

When Ball Y is grounded while the negatively charged ball is close, the excess electrons on Ball Y will flow into the ground, neutralizing any negative charge and leaving it positively charged. When the ground connection is removed, Ball Y remains positively charged.

This process illustrates induction as the primary method of charging without direct contact.

Answer: Blanks in order are: Right, Left

Explanation:

The moon rotates around the Earth. It completes its rotation in roughly 29.5 days which is known as the lunar cycle. The first half of rotation is known as waxing and in this the moon starts to become a full moon so bright side of the moon appears on the left side of Earth. After this ends, the waning part starts which means the decreasing of light of moon so bright side is on the left side of the Earth.

During the first half of the lunar cycle, the bright part of the moon (waxing moon) appears on the right side and after the full moon, the lit part of the moon (waning moon) appears on the left side.

According to the animation, in the first half of the lunar cycle, the waxing, or growing, bright part of the moon appears on the right side (from an observer in the northern hemisphere). This phase is known as a waxing moon. After the full moon when the moon starts to shrink, or wane, the illuminated part of the moon appears on the left side. This phase is known as a waning moon.

Answer

given,

initial speed = 18 m/s

distance, d = 130 m

reaction time, t_r = 0.50 s

a) distance traveled in the reaction time

   d= s x t_r

   d=18 x 0.5

  d = 9 m

distance of the traffic light, d = 130 - 9 = 121 m

b) deceleration

  [tex]a = \dfrac{v^2-u^2}{2s}[/tex]

  [tex]a = \dfrac{0^2-18^2}{2\times 121}[/tex]

         a = -1.34 m/s²

c) Using equation of motion

   v = u + a t

   0 = 18 - 1.34 t

    t = 13.43 s

Total time, T = 13.43 + 0.5 = 13.93 s

Part A. The distance from the intersection is 121 m.

Part B. The acceleration required is 1.34 m/s2

Part C. The total time to stop at the signal is 13.93 s.

Given that the initial speed is 18 m/s. The distance is 130 m from an intersection when the traffic light turns red. The rejection time is 0.50 s.

Part A

The distance traveled in rejection time is given below.

distance traveled in rejection time =  speed [tex]\times[/tex] rejection time

[tex]d_r = s\times t_r[/tex]

[tex]d_r = 18\times 0.50[/tex]

[tex]d_r = 9\;\rm m[/tex]

Hence the distance from the traffic light is given below.

[tex]d = 130 -d_r[/tex]

[tex]d = 130 -9[/tex]

[tex]d = 121\;\rm m[/tex]

The distance from the intersection is 121 m.

Part B

The acceleration can be calculated as given below.

[tex]a = \dfrac {v^2 - u^2}{2s}[/tex]

Where u is the initial speed, v is the final speed and s is the distance from the intersection.

[tex]a = \dfrac {0^2 - (18)^2}{2\times 121}[/tex]

[tex]a = - 1.34 \;\rm m/s^2[/tex]

The acceleration required is 1.34 m/s2. Here negative sign shows that this is deacceleration.

Part C

The time to stop at the signal can be calculated as given below.

[tex]v = u +at[/tex]

[tex]0 = 18 - 1.34 \times t[/tex]

[tex]t = \dfrac {18}{1.34}[/tex]

[tex]t = 13.43 \;\rm s[/tex]

Total Time = [tex]13.43 + 0.5[/tex]

Total Time =  13.93 s

Hence the total time to stop at the signal is 13.93 s.

To know more about speed and acceleration, follow the link given below.

https://brainly.com/question/14363745.

Answer:

0.2448 point²

Explanation:

1 gry = 1/10 line

1 line = 1/12 inch

=> 1 gry in inches = 1/10 * 1/12 = 1/120 inch

=> 1 inch = 120 gry

1 point = 1/72 inch

=> 1 inch = 72 points

Therefore,

120 gry = 72 points

=> 1 gry = 3/5 point

Therefore,

1 gry² = (3/5)² point²

1 gry² = 9/25 point²

This means that 0.68 gry² will be:

0.68 gry² = 0.68 * 9/25 point²

=> 0.68 gry² = 0.2448 point²

The area of 0.68 gry2 is 0.2448 point2.

Given that A gry is an old English measure for length, defined as 1/10 of a line. We can write this as given below.

[tex]1 \;\rm gry = \dfrac {1}{10}\;\rm line[/tex]

A line is another old English measure for length, defined as 1/12 inch. We can write this as given below.

[tex]1 \;\rm line = \dfrac {1}{12}\;\rm inch[/tex]

Thus the value of 1 gry in inches will be,

[tex]1 \;\rm gry = \dfrac {1}{10}\times \dfrac {1}{12} \;\rm inch[/tex]

[tex]1 \;\rm gry = \dfrac {1}{120}\;\rm inch[/tex]

[tex]120 \;\rm gry = 1\;\rm inch[/tex]

A common measure for length in the publishing business is a point, defined as 1/72 inch. We can write this as given below.

[tex]1 \;\rm point = \dfrac {1}{72}\;\rm inch[/tex]

[tex]72 \;\rm point = 1 \;\rm inch[/tex]

Now we can equate the values of 1 inch, we get the expression as,

[tex]120 \;\rm gry = 72 \;\rm point[/tex]

[tex]1 \;\rm gry = \dfrac {72}{120}\;\rm point[/tex]

[tex]1 \;\rm gry = 0.6 \;\rm point[/tex]

[tex](1\;\rm gry )^2 = (0.6 \;\rm point)^2[/tex]

[tex]1\;\rm gry ^2 = 0.36 \;\rm point^2[/tex]

We have the value of 1 gry2 in terms of point2. Thus,

[tex]0.68 \;\rm gry^2 = 0.68 \times 0.36 \;\rm point^2[/tex]

[tex]0.68\;\rm gry^2 = 0.2448 \;\rm point^2[/tex]

Hence we can conclude that the area of 0.68 gry2 in points squared is 0.2448.

To know more about the area, follow the link given below.

https://brainly.com/question/16151549.

The relationship between the amount of stretch or compression  in an elastic object and the amount of force that is applied to that object is directly proportional to each other.

Answer:

Option B

Explanation:

Ideal elastic objects are those which will retain its original form after the removal of external force on it. So this specialty of retaining their original form after deforming due to external force is termed as elasticity. And the objects exhibiting this property is termed as elastic object. The most important law in the field of elasticity which is obeyed by all elastic object is the Hooke's law. As per Hooke's law, the external force applied on any object for deformation will be directly proportional to the changes or deformation exhibited by the object due to force. In other or simple words, the strain produced due to the external force is directly proportional to the stress acting on that object.

Stress ∝ Strain

Stress is the measure of force applied on that object and strain is the measure of amount of stretch or compression due to stress or applied force.

So option B is the correct option.

Thus, the relationship between the amount of stretch or compression  in an elastic object and the amount of force that is applied to that object is directly proportional to each other.

The amount of stretch or compression in an elastic object is directly proportional to the force applied, based on the principle known as Hooke's Law. This relationship is linear, meaning that changes in force result in proportional changes in deformation.

The amount of stretch or compression in an elastic object is directly proportional to the amount of force that is applied. This principle is captured by Hooke's Law, which states when you apply force to stretch or compress a spring, the resulting spring force is proportional, and in the opposite direction, to the displacement or deformation from its position of equilibrium. Essentially, if you double the force, the amount of stretch or compression doubles, and if you halve the force, the stretch or compression is halved as well. This relationship can be represented by the equation F = -kx, where F is the force, k is the spring's force constant, and x is the displacement from the equilibrium position.

Tension and compression play a role here, where tension forces stretch the object while compression forces push the object together. Hooke's Law applies to ideal springs and other elastic objects provided the deformation does not exceed the material's elastic limit.

Answer:

78.4 m

Explanation:

Using newton's equation of motion,

S = ut + 1/2gt²......................... Equation 1

Where S = Height, t = time, u = initial velocity, g = acceleration due to gravity.

Note: Taking upward to be negative, and down ward positive

Given: u = 49 m/s, t = 2.0 s, g = -9.8 m/s²

Substitute into equation 1

S = 49(2) - 1/2(9.8)(2)²

S = 98 - 19.6

S = 78.4 m

Hence the height of the ball two seconds later = 78.4 m

Answer:

(a) [tex]V_{avg}=2.868m/s[/tex]

(b) [tex]V_{avg}=5.352m/s[/tex]

(c) [tex]V_{avg}=7.836m/s[/tex]

Explanation:

Given data

x(t)=αt²-βt³

α=1.53m/s²

β=0.0480m/s³

First we need to find distance x at these time so

x(t)=1.53t²-0.0480t³

at t=0

x(0)=1.53(0)²-0.0480(0)³=0m

at t=2

x(2)=1.53(2)²-0.0480(2)³=5.736m

at t=4s

x(4)=1.53(4)²-0.0480(4)³=21.408 m

For(a) Average velocity at t=0s to t=2s

The average velocity is given as

Vavg=Δx/Δt

[tex]V_{avg}=\frac{x_{f}-x_{i} }{t_{f}-t_{i}}\\ As\\x(0)=0m\\x(2)=5.736m\\V_{avg}=\frac{5.736m-0m }{2s-0s}\\V_{avg}=2.868m/s[/tex]

For(b) Average velocity at t=0s to t=4s

The average velocity is given as

Vavg=Δx/Δt

[tex]V_{avg}=\frac{x_{f}-x_{i} }{t_{f}-t_{i}}\\ As\\x(0)=0m\\x(4)=21.408m\\V_{avg}=\frac{21.408m-0m }{4s-0s}\\V_{avg}=5.352m/s[/tex]

For(c) Average velocity at t=2s to t=4s

The average velocity is given as

Vavg=Δx/Δt

[tex]V_{avg}=\frac{x_{f}-x_{i} }{t_{f}-t_{i}}\\ As\\x(2)=5.736m\\x(4)=21.408m\\V_{avg}=\frac{21.408m-5.736m }{4s-2s}\\V_{avg}=7.836m/s[/tex]

Final answer:

The average velocity of the Honda Civic over the time intervals from t=0 to t=2.00 s is 2.868 m/s, from t=0 to t=4.00 s is 5.352 m/s, and from t=2.00 s to t=4.00 s is 7.836 m/s, calculated using the given equation and the variables α and β.

Explanation:

To find the average velocity of the Honda Civic over specific time intervals using the equation x(t) = α t^2 - β t^3, where α = 1.53 m/s^2 and β = 4.80×10^-2 m/s^3, we must calculate the change in position (Δx) over the change in time (Δt) for each interval.

a) t = 0 to t = 2.00 s

Initial position, x(0) = 0 (since any term with t = 0 results in 0).
Final position, x(2) = 1.53×2^2 - 4.80×10^-2×2^3 = 6.12 - 0.384 = 5.736 m.
Δx = 5.736 - 0 = 5.736 m, Δt = 2 s.
Average velocity = Δx/Δt = 5.736 m / 2 s = 2.868 m/s.

b) t = 0 to t = 4.00 s

Final position, x(4) = 1.53×4^2 - 4.80×10^-2×4^3 = 24.48 - 3.072 = 21.408 m.
Δx = 21.408 - 0 = 21.408 m, Δt = 4 s.
Average velocity = Δx/Δt = 21.408 m / 4 s = 5.352 m/s.

c) t = 2.00 s to t = 4.00 s

Using the previously calculated final positions for t = 2 and t = 4:
Δx = 21.408 - 5.736 = 15.672 m, Δt = 4 s - 2 s = 2 s.
Average velocity = Δx/Δt = 15.672 m / 2 s = 7.836 m/s.

Answer:

Venus observation.

Explanation:

Galileo had learned regarding the  heliocentric (Sun-centered) idea of Copernicus, and acknowledged it. However, the theory was proven by Galileo's observations of Venus. Galileo concluded that Venus should travel round the Sun, sometimes passing behind and then beyond, instead of directly rotating around the Earth.

Answer:

The solution is in the attached files below

Explanation:

ANSWER: 2 hours

EXPLANATION: After three hours Austin has traveled 12 miles. Wyatt will start up and in an hour will be at 10 miles, but by that time Austin will be at 16 miles. One more mile and Wyatt will be at 20 miles and so will Austin. So that would make the answer 2 hours.

Answer:

XeF₄

Explanation:

Dalton law's of partial pressure states that the total pressure equal to the sum of the partial pressure of the individual gases that make up the mixture.

Pt = Pxe + Pf₂

0.72 = 0.12 + Pf₂

0.72 - 0.12 =  Pf₂

0.60 atm = Pf₂

after the the reaction was complete, the pressure of F₂ remaining = 0.36 atm

pressure of the consumed F₂ = 0.60 - 0.36 = 0.24 atm

Pxe / total pressure = number of mole / total number of mole of gas present

0.24 / 0.72 = nf / nt

0.12 / 0.72 = nxe / nt

comparing the two

(1/ 3) / ( 1/6) = (nf/ nt) / ( nxe/ nt)

nf / nxe = 2 / 1

the emperical formula = XeF₄

The empirical formula of the xenon fluoride is :

 -XeF₄

It states that the Total pressure break even with to the whole of the fractional weight of the person gasses that make up the blend.

Pressure of F₂ remaining = 0.36 atm

Pressure of the consumed F₂ = 0.60 - 0.36 = 0.24 atm

Pxe / total pressure = number of mole / total number of mole of gas present

0.24 / 0.72 = nf / nt

0.12 / 0.72 = nxe / nt

comparing the two:

(1/ 3) / ( 1/6) = (nf/ nt) / ( nxe/ nt)

nf / nxe = 2 / 1

The emperical formula = XeF₄

Learn more about "Emperical Formula" :

https://brainly.com/question/11588623?referrer=searchResults

Answer:

v = 11.0 m/s at 198.6° (18.6° south of west)

ΔKE = -145 kJ

Explanation:

I assume you want to find the final velocity and the change in kinetic energy.

Take east to be +x and north to be +y.

Momentum is conserved in the x direction:

(1050 kg) (0 m/s) + (750 kg) (-25.0 m/s) = (1050 kg + 750 kg) vₓ

vₓ = -10.4 m/s

Momentum is conserved in the y direction:

(1050 kg) (-6.00 m/s) + (750 kg) (0 m/s) = (1050 kg + 750 kg) vᵧ

vᵧ = -3.50 m/s

The magnitude of the final velocity is:

v² = (-10.4 m/s)² + (-3.50 m/s)²

v = 11.0 m/s

The direction of the final velocity is:

θ = atan(-3.50 m/s / -10.4 m/s)

θ = 198.6°

The initial kinetic energy is:

KE₀ = ½ (1050 kg) (6.00 m/s)² + ½ (750 kg) (25.0 m/s)²

KE₀ = 253,275 J

The final kinetic energy is:

KE = ½ (1800 kg) (11.0 m/s)²

KE = 108,682 J

The change in kinetic energy is:

ΔKE = 108,682 J − 253,275 J

ΔKE ≈ -145,000 J

Answer:

Toxicity is a quantitative property

Explanation:

.

Answer:

B. When the racket hits the tennis ball with a force, the tennis ball applies an equal but opposite force to the racket

Explanation:

Newton's third law of motion states that for every action there is an equal and opposite reaction. Therefore, when Krista's racket hits the tennis ball with a force, the tennis ball applies an equal but opposite force to the racket.

When the racket hits the tennis ball with a force, the tennis ball applies an equal but opposite force to the racket. Therefore option B is correct.

According to Newton's third law of motion, for every action, there is an equal and opposite reaction.

In this scenario, when Krista hits the tennis ball with her racket (the action), the tennis ball exerts an equal but opposite force back onto the racket (the reaction).

This is depicted by option B, which correctly states that the tennis ball applies an equal but opposite force to the racket. This law underscores the idea that forces always come in pairs, and the forces are exerted on two different objects.

The force Krista applies to the ball is met with an equal force from the ball back onto her racket, causing the ball to fly in the opposite direction.

Therefore option B is correct.

Know more about Newton's law:

https://brainly.com/question/34706880

#SPJ3

The time period of the mass attached to a spring that oscillates and completes 51 full cycles in 35 seconds is approximately 0.686 seconds, and the frequency is about 1.458 Hz.

To determine the time period (T) and frequency (f) of the oscillating mass attached to a spring, we can use the relationship between the number of cycles (n), total time (t), and the time period (T = t/n). If the mass completes 51 full cycles in 35 seconds, the time period (T) is calculated as:

In conclusion, the time period of the system is approximately 0.686 seconds, and the frequency is about 1.458 Hz.

Answer:

Explanation:

Maximum height of a projectile

[tex]H_{max}=\frac{u^2\sin ^2\theta }{2g}[/tex]

(1)[tex]u=30.7\ m/s[/tex]

[tex]\theta =35.7^{\circ}[/tex]

[tex]H_1=\frac{30.7^2\times \sin ^2(35.7)}{2\times 9.8}[/tex]

[tex]H_1=16.37\ m[/tex]

(2)[tex]u=47.9\ m/s[/tex]

[tex]\theta =33.2^{\circ}[/tex]

[tex]H_2=\frac{47.9^2\times \sin ^2(33.2)}{2\times 9.8}[/tex]

[tex]H_2=35.09\ m[/tex]

(3)[tex]u=21.8\ m/s[/tex]

[tex]\theta =67.7^{\circ}[/tex]

[tex]H_3=\frac{21.8^2\times \sin ^2(67.7)}{2\times 9.8}[/tex]

[tex]H_3=20.75\ m[/tex]

(4)[tex]u=7.7\ m/s[/tex]

[tex]\theta =62.1^{\circ}[/tex]

[tex]H_4=\frac{7.7^2\times \sin ^2(62.1)}{2\times 9.8}[/tex]

[tex]H_4=2.36\ m[/tex]      

Therefore height reached by pumpkin can be arranged as

[tex]H_4<H_1<H_3<H_2[/tex]

Final answer:

The maximum height reached by the pumpkin depends on the vertical component of the initial velocity, which is highest for the trial with a speed of 21.8m/s and angle of 67.7 degrees and lowest for the speed of 7.7m/s at an angle of 62.1 degrees.

Explanation:

To rank the maximum height reached by the pumpkin in each trial, we can rely on the principle of projectile motion. The maximum height depends primarily on the vertical component of the initial velocity and can be compared by isolating this component using the initial speeds and angles given.

Using the formula for the vertical component of velocity: [tex]Vy = V * sin(\(\theta\)),[/tex] where V is the initial speed and [tex]\(\theta\)[/tex] is the launch angle. Then, the maximum height H can be roughly compared using [tex]H \(\propto Vy^2[/tex], assuming gravitational acceleration is constant and air resistance is negligible.

Answer:

Option A & B

Explanation:

This is cause the compass needle is magnetized anointed in such a way that it responds to magnetic field strength.

Answer:

Dehydration reactions assemble polymers, and hydrolysis reactions break down polymers.

Explanation:

dehydration reaction is a conversion that involves the loss of water from the reacting molecule or ion.

Hydrolysis is defined as any chemical reaction in which a molecule of water ruptures one or more chemical bonds.

Dehydration reactions link monomers together into polymers by releasing water, and hydrolysis breaks polymers into monomers using a water molecule. Monomers are just single unit molecules and polymers are chains of monomers.

Dehydration reactions and hydrolysis have opposite roles in relation to polymers. Dehydration reactions involve the removal of a water molecule to assemble polymers, while hydrolysis involves the addition of a water molecule to break down polymers.

The relationship between dehydration reactions and hydrolysis is that they essentially have opposite roles in relation to polymers. Dehydration reactions are processes that involve the removal of a water molecule, which allows for the formation or assembly of polymers. This occurs because a hydroxyl group (OH) is removed from one molecule and a hydrogen (H) from another, enabling the two molecules to bond and form a polymer.

In contrast, hydrolysis is a reaction that involves the addition of a water molecule, which results in the breakdown of polymers into monomers. During hydrolysis, a water molecule is split into a hydroxyl group and a hydrogen, and these are used to break the bonds within a polymer, resulting in monomers.

So, to summarize, the best choice that describes the relationship between these two processes is: Dehydration reactions assemble polymers, and hydrolysis reactions break down polymers.

https://brainly.com/question/34331091

#SPJ3