Answer:
1. Sexual reproduction always requires two parents.
3. Asexual reproduction requires only one parent.
Explanation:
The statement which clearly distinguish two types of reproduction is option 1. Sexual reproduction always require two parents whereas, asexual reproduction.
What is asexual reproduction ?Asexual reproduction refers to a type of reproduction where a child is born to a single parent. The newly created people are clones of their parents since they have the same genetic makeup and physical characteristics.
Both multicellular and unicellular species can reproduce asexually. There will be no gamete fusion involved in this procedure, and the number of chromosomes will remain the same.
Sexual reproduction always requires two parents. The genetic traits from both parents are inherited to the offsprings. However , not all of them can be active traits some goes hidden. Hence, option 1 is correct.
Find more on inheritance:
https://brainly.com/question/14930526
SPJ6
Explain what needs to be done to the circuit so that the bell will make a sound
Answer:a switch
Explanation:because the electricity will go to the battery to the bell and it will make a sound
To activate the bell in the circuit, connect wire A from the battery to wire B leading to the bell, completing the circuit and allowing electric current to flow, resulting in the bell producing sound vibrations.
To make the bell sound in the circuit:
1. Connect wire A, currently attached to the battery, to wire B, which is connected to the bell.
2. This will complete the circuit and allow the electric current to flow continuously from the battery through the bell.
3. When the circuit is closed by connecting wires A and B, the electric current will pass through the bell, causing it to vibrate and produce a sound.
4. The completion of the circuit enables the electrical energy to power the bell, resulting in its functionality and the production of sound.
A sample of oxygen occupies 47.2 liters under a pressure of 1240 torr at 298K. What volume would it occupy at 303K if the pressure were decreased to 730 torr
Answer:
81.5 L
Explanation:
We can use the combined gas law equation that gives the relationship among pressure, temperature and volume of gases for a fixed amount of gas.
P1V1 / T1 = P2V2 / T2
where P1 - pressure, V1 - volume and T1 - temperature at the first instance
P2 - pressure, V2 - volume and T2 - temperature at the second instance
substituting the values in the equation
1240 Torr x 47.2 L / 298 K = 730 Torr x V2 / 303 K
V2 = 81.5 L
the new volume the gas would occupy when the conditions have changed is 81.5 L
The problem involves using the ideal gas law to find the volume of oxygen gas under different conditions of temperature and pressure. The initial volume of 47.2 liters at 1240 torr and 298K changes to approximately 79.4 liters when the conditions are changed to 730 torr and 303K.
Explanation:The subject of this question is the application of the ideal gas law, an equation used in physics and chemistry to calculate the properties of gases. The gas law equation is PV = nRT, where 'P' is the pressure, 'V' is the volume, 'n' is the number of moles, 'R' is the gas constant, and 'T' is the temperature. However, since the number of moles and the gas constant doesn't change in our problem, we can simplify it to P1*V1/T1 = P2*V2/T2. This equation is used to solve problems involving changes in pressure, volume, and temperature for a gas.
Given conditions: P1 = 1240 torr, V1 = 47.2 L, T1 = 298K; Required conditions: P2 = 730 torr, T2 = 303K. The volume V2 under the required conditions can be calculated by rearranging the formula to V2 = P1*V1*T2/(P2*T1).
Therefore, if you substitute the corresponding numbers into the formula, you will get V2 = 1240 torr * 47.2 L * 303K / (730 torr * 298K) which results in approximately 79.4 liters.
Learn more about Ideal gas law here:https://brainly.com/question/30458409
#SPJ3
The diagram above depicts an energy releasing process involving the uranium atom. Which form of energy does this process depict?
A)
nuclear energy
B)
magnetic energy
C)
electrical energy
D)
hydroelectric energy
A nuclear energy is the answer
The diagram above depicts an energy releasing process involving the uranium atom,Nuclear energy is the form of energy that the process depict.
What is Nuclear energy?Nuclear energy is the energy in the nucleus, or core, of an atom. Nuclear energy can be used to create electricity, but it must first be released from the atom. Nuclear power can be obtained from nuclear fission, nuclear decay and nuclear fusion reactions. An example of nuclear energy is the electricity generated by a nuclear reactor, which is the major power source used in Japan.Nuclear energy is the form of energy that depict from the time of above mentioned process.
To learn more about Nuclear energy refer:https://brainly.com/question/1013815
#SPJ2
Determine the moles of solute particles in 1.0 kg of a 3.0 m Ca(NO3)2 solution.
Answer:
3.0 mol.
Explanation:
Molaity (m) is defined as the no. of moles of solute per kg of solvent.
m = (no. of moles of solute Ca(NO₃)₂)/(kg of solvent).
∴ no. of moles of solute Ca(NO₃)₂ = (m)(kg of solvent) = (3.0 m)(1.0 kg) = 3.0 mol.
You are walking in a clear-cut section of forest a few days after a heavy rainstorm. A nearby stream is very muddy and has many dead fish. What might have happened?
The muddy water and dead fish can be due to soil erosion or sediment runoff, changes in photosynthesis due to excess organic material causing eutrophication, or changes in habitat conditions due to clear-cutting of forests.
Explanation:The muddiness of the stream and the presence of dead fish could be signs of a phenomenon called soil erosion or sediment runoff. This is where heavy rain washes soil, which can contain toxins or pollutants, into a water source such as a stream. The influx of silt can make the water muddy and unhealthy for aquatic life, leading to the death of fish. Changes or disruptions in the ecosystem such as clear-cutting of forests increase the risk of this erosion since trees and vegetation help to hold the soil in place and buffer waterways.
Another possibility is the change in the stream's photosynthesis processes due to the debris and excess organic materials like leaves being washed into the stream. The increase in organic material can lead to a process called eutrophication, where the decomposition of organic material uses up oxygen in the water, thus suffocating fish and other aquatic species.
The death of fish might also be due to changes in their habitat. Clearing of trees could have changed the temperature of the water as shadows from the tree cover, which kept temperatures lower, no longer exist. Aquatic life such as leeches, trout and other species that have adapted to the previous temperature conditions of the fast-moving water may not survive in the warmer, slower moving water.
Learn more about Aquatic Ecosystem Disruption here:https://brainly.com/question/31092061
#SPJ3
Increased sedimentation from soil erosion due to clear-cutting and heavy rainstorms can lead to murky water, which suffocates fish and disrupts the aquatic food web by reducing visibility needed for predators to find food.
You are in a clear-cut section of forest and you notice a nearby stream is very muddy with many dead fish. This could be due to sedimentation resulting from the recent heavy rainstorm. The clear-cutting of trees can exacerbate soil erosion, leading to increased sediment in the water, which can suffocate fish by clogging their gills or destroying their habitat. This also disrupts the ecosystem, as sediment-laden water can make it difficult for predators such as waterfowl, frogs, and fishes to find food, which often depend on clearer water to hunt using visual cues or chemical cues.
The mudflows and flash flooding caused by the monsoon, further compounded by deforestation, often introduce a large amount of sediment and organic material into waterways, degrading the aquatic environment and affecting the entire aquatic food web.
Sydney, Australia, Is in the Southern Hemisphere. Which choice describes the conditions in Sydney on or around December 21
Answer:warm
Explanation: because it is in the southern hemisphere so in the winter while the northern hemisphere is in a cold winter the southern hemisphere is in a warm winter due to it being in the southern hemisphere where temperatures are really warm in the southern hemisphere.
Answer:the answer is warm
Explanation:
Select the correct answer. Which is the most electronegative element? A. nitrogen B. fluorine C. sodium D. cesium E. hydrogen
Answer:
fluorine
Explanation:
fluorine is considered the most electronegative element
Final answer:
The correct answer is "flourine". The most electronegative element is fluorine due to its position at the top right of the periodic table and its electron configuration which is one electron short of a full octet.
Explanation:
The most electronegative element is fluorine. Electronegativity is a measure of an atom's ability to attract and hold onto electrons. In the periodic table, electronegativity increases as you move from left to right across a period and decreases as you move down a group. Therefore, fluorine, which is positioned at the top right of the periodic table (aside from the noble gases), exhibits the highest electronegativity.
Fluorine's high electronegativity is attributed to its atomic electron configuration of 1s² 2s² 2p⁵, making it one electron short of a full octet. This drives its strong tendency to gain electrons from other elements, making it a very strong oxidizing agent. In comparison, hydrogen, while being more electronegative than many other elements, such as carbon, does not approach the electronegativity of fluorine.
Thus, the correct answer to the question is B. fluorine.
what atom has twice as many protons in it as an oxygen atom?
the anwer is sulfer since its the only one that bonds with an oxygen atom
Sulfur atom has twice as many protons in it as an oxygen atom. The smallest unit of matter that may be divided without producing electrically charged particles is the atom.
What is atom?The smallest unit of matter that may be divided without producing electrically charged particles is the atom. It is also the smallest piece of substance with chemical element-like characteristics. As a result, the atom serves as the fundamental unit of chemistry.
Space makes up the majority of an atom. The rest is made up of a cloud of electrons that are negatively charged surrounding a positive charge nucleus made up of protons and neutrons. Compared to electrons, which have been the lightest positive ions in nature, the nucleus appears small but dense. Electric forces, which link electrons to a nucleus of atoms, cause them to be drawn to any positive charge. Sulfur atom has twice as many protons in it as an oxygen atom.
Therefore, Sulfur atom has twice as many protons in it as an oxygen atom.
To know more about atom, here:
https://brainly.com/question/29712157
#SPJ3
how a strontium salt emits colored light
Answer:
When excited electrons fall to lower energy levels, they can release energy in the form of light. metal ions in the salts used in the flame tests.
Waves that require a medium through which to travel are electromagnetic waves. True or False?
Answer:
True
Explanation:
Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate.
Waves that require medium through which to travel are “electromagnetic waves”? Yes this is “TRUE”
An explosive occurs when what expands?
A. Gases
B. Chemicals
C. Fire
D. Oxygen
An explosive occurs when Gases expands. Therefore, option A is correct.
What do you mean by explosion ?The term an explosion is defined as the rapid increase in volume and release of energy extremely.
An incendiary device or a chemical reaction that results in the rapid expansion of gas causes an explosion.
A very loud sound or a succession of noises and sensations, fire, heat, smoke, falling glass, or debris can all be indicators of an explosion.
Three general energy deposition techniques can lead to high explosive reactions, impact ignition by frictional and/or shear heating, bulk thermal heating and shock compression.
When there is a gas leak and a spark or flame are present, a gas explosion happens. Because they are frequently used for heating, gases including natural gas, methane, propane, and butane are the most frequent types of gases to cause explosions.
Thus, option A is correct.
To learn more about the explosion, follow the link;
https://brainly.com/question/8735140
#SPJ2
Predict which atom has the higher ionization energy. Mg Na
Answer:
Mg
Explanation:
The periodic trend of ionization energy is going from left to right of the periodic table, ionization energy increases. in the periodic table, both magnesium (Mg) and Sodium (Na) fall under the same period.
Na is the found in the left-most end of the period and Mg comes after it. This means that Mg has the higher ionization energy.
Explanation:
Ionization energy is defined as the energy required to remove most loosely bound electron from a gaseous atom or ion.
Larger is the size of atom less energy will be necessary to remove the valence electron because force of attraction will be less between the nucleus and outermost electron.
Hence, it is easy to remove the outermost electron.
Whereas smaller is the size of atom great amount of energy will be required by it to remove the loosely bound electron.
So, when we move down a group there will be increase in size of atoms. Hence, ionization energy decreases.
On the other hand, when we move across a period then there occurs decrease in size of atoms. Hence, ionization energy increases.
As, magnesium is smaller is size than sodium and both of then are same period elements.
Thus, we can conclude that magnesium (Mg) atom has the higher ionization energy.
Solutions are formed by_____.
a solution is two substances that are evenly mixed together. One of them is called the solute and the other is the solvent. A solute is the substance to be dissolved (ex: sugar). The solvent is the one doing the dissolving (ex: water).
i learned this in science last year i hope this helped :)
Answer: A solution is made when one substance called the solute “dissolves” into another substance called the solvent.
Explanation:
Dissolving is when the solute breaks up from a larger crystal of molecules into much smaller groups or individual molecules. They do this by pulling away the ions and then surrounding the salt molecules.
What is a salt? A compound formed from a(n) ____ from an acid and a(n) ____ from a base.
A salt is an ionic compound produced from the combination of a cation from a base and an anion from an acid, often during a neutralization reaction.
A salt is an ionic compound formed when an acid and a base neutralize each other. This chemical reaction typically produces a salt and water as products. In the reaction, a positive ion or cation from the base combines with a negative ion or anion from the acid. An example of this process is the formation of sodium chloride (NaCl), where sodium ions (Na+) from sodium hydroxide (NaOH) react with chloride ions (Cl-) from hydrochloric acid (HCl), resulting in table salt, NaCl.
The general equation for a reaction between an acid and a base is: acid + base → water + salt
Salts can be formed from these reactions even if the solution is not neutral; they can be either acidic or basic, depending on the strengths of the original acid and base. It's noteworthy that the term neutralization reaction is often used to describe the process, as it typically involves the neutralization of the acid and base properties.
What is chemical potential energy?
How is gasoline used as kinetic energy?
How is dynamite used as kinetic energy?
Chemical potential energy: chemical potential of a species is energy that can be absorbed or released due to a change of the particle number of the given species, in a chemical reaction or phase transition
Gasoline used as kinetic energy: the various chemicals that make up gasoline contain a large amount of chemical potential energy that is released when the gasoline is burned in a controlled way in the engine of the car. The release of that energy does two things. Some of the potential energy is transformed into work, which is used to move the car
Dynamite used as kinetic energy: the dynamite being used was most likely made of nitroglycerin. Once the dynamite explodes from a percussion force (then breaking of weak bonds to releasing the raw atom) the energy is then converted to thermal, kinetic, and sound energy.
Chemical potential energy, stored in molecules, is released during chemical reactions. Both gasoline and dynamite store this energy that, when ignited, is converted into kinetic energy. Gasoline propels cars, whilst dynamite causes explosions.
Explanation:Chemical potential energy is a form of energy stored in molecules that is released during a chemical reaction. For example, gasoline and dynamite both store chemical potential energy that can be converted into kinetic energy.
Consider gasoline put into a car's engine. It mixes with air and is ignited in the engine's combustion chamber, causing a chemical reaction that releases the gasoline's potential energy. This energy is transformed into kinetic energy, propelling the car forward.
Similarly, dynamite contains chemical potential energy. When ignited, a chemical reaction occurs, releasing this energy. This energy is quickly converted to kinetic energy, causing the explosive force that dynamite is known for.
Learn more about Chemical Potential Energy here:https://brainly.com/question/1907128
#SPJ3
what is the maximum number of electrons that can occupy one orbital
Answer:
2
Explanation:
Given the following thermodynamic data, calculate the lattice energy of LiCl:
Delta;H°f[LiCl(s)] = -409 kJ/mol
ΔH°sublimation [Li] = 161 kJ/mol
Bond energy [Cl-Cl] = 243 kJ/mol
IE1 (Li) = 520 kJ/mol
EA1 (Cl) = -349 kJ/mol
Answer:
[tex]\boxed{\text{-862 kJ/mol}}[/tex]
Explanation:
One way to calculate the lattice energy is to use Hess's Law.
The lattice energy U is the energy released when the gaseous ions combine to form a solid ionic crystal:
Li⁺(g) + Cl⁻(g) ⟶ LiCl(s); U = ?
We must generate this reaction rom the equations given.
(1) Li(s) + ½Cl₂ (g) ⟶ LiCl(s); ΔHf° = -409 kJ·mol⁻¹
(2) Li(s) ⟶ Li(g); ΔHsub = 161 kJ·mol⁻¹
(3) Cl₂(g) ⟶ 2Cl(g) BE = 243 kJ·mol⁻¹
(4) Li(g) ⟶Li⁺(g) +e⁻ IE₁ = 520 kJ·mol⁻¹
(5) Cl(g) + e⁻ ⟶ Cl⁻(g) EA₁ = -349 kJ·mol⁻¹
Now, we put these equations together to get the lattice energy.
E/kJ
(5) Li⁺(g) +e⁻ ⟶ Li(g) 520
(6) Li(g) ⟶ Li(s) -161
(7) Li(s) + ½Cl₂(g) ⟶ LiCl(s) -409
(8) Cl(g) ⟶ ½Cl₂(g) -121.5
(9) Cl⁻(g) ⟶ Cl(g) + e⁻ +349
Li⁺(g) + Cl⁻(g) ⟶ LiCl(s) -862
The lattice energy of LiCl is [tex]\boxed{\textbf{-862 kJ/mol}}[/tex].
Using the Born-Haber cycle and the provided thermodynamic data, the lattice energy of LiCl is calculated to be -1282 kJ/mol.
Explanation:The lattice energy of a compound is the energy required to break apart the compound into its constituent ions. It can be calculated using Born-Haber cycle, Hess’s Law and the given thermodynamic data.
ΔH°f[LiCl(s)] = Bond energy [Cl-Cl] + IE1 (Li) - EA1 (Cl) + ΔH°sublimation [Li] + Lattice energy
So, solving for Lattice Energy gives: Lattice energy = ΔH°f[LiCl(s)] - Bond energy [Cl-Cl] - IE1 (Li) + EA1 (Cl) - ΔH°sublimation [Li].
Substituting in the provided values gives: Lattice energy = -409 kJ/mol - 243 kJ/mol - 520 kJ/mol + (-349 kJ/mol) - 161 kJ/mol = -1282 kJ/mol. Therefore, the Lattice Energy of LiCl is -1282 kJ/mol.
Learn more about Lattice Energy here:https://brainly.com/question/34679410
#SPJ3
what is the molarity of a solution
Molarity is defined as the number of moles of solutions divided by the volume of the solution in liters
Answer:
Molarity is defined as the number of moles of solutions divided by the volume of the solution in liters
Explanation:
what is the mass of 4.56 moles of copper (ii) fluoride
Answer:
463.0 g.
Explanation:
We can use the following relation:n = mass/molar mass.
where, n is the mass of copper(ii) fluoride (m = 4.56 mol),
mass of copper(ii) fluoride = ??? g.
molar mass of copper(ii) fluoride = 101.543 g/mol.
∴ mass of copper(ii) fluoride = (n)(molar mass) = (4.56 mol)(101.543 g/mol) = 463.0 g.
What is climate. i need help with my project please help As Fast As Possible
Answer:Climate is defined as the average state of everyday's weather condition over a period of 30 years.[1][2] It is measured by assessing the patterns of variation in temperature, humidity, atmospheric pressure, wind, precipitation, atmospheric particle count and other meteorological variables in a given region over long periods of time. Climate differs from weather, in that weather only describes the short-term conditions of these variables in a given region.
Explanation:
What is the molecule name for 2H2S?
Answer:
Dihydrate.
Explanation:
It comprises 2 molecules of H2O (water). This is the correct answer to this question.
Hope this helps!!!
Kyle.
PLZ HELP ME!!! I'll give brainliest to whoever answers this along with 15 points!
Talc
(asphalt)
gypsum
(fingernail)
calcite
(copper coin)
fluorite
apatite
(knife blade)
feldspar
(steel file)
quartz
topaz
corundum
diamond
Which of the substances listed above are pure elements?
I would say diamond, because it consists only of carbon
Consider the following intermediate chemical equations.
What is the enthalpy of the overall chemical reaction
Image below
The enthalpy change for the overall reaction is 999 kJ.
To find the enthalpy change for the overall reaction [tex]PCl_{5}[/tex](g) → [tex]PCl_{3}[/tex](g) + [tex]Cl_{2}[/tex](g), we need to combine the given intermediate equations.
The first equation is: [tex]P_{4}[/tex](s) + 6 [tex]Cl_{2}[/tex](g) → 4 [tex]PCl_{3}[/tex](g), with an enthalpy change of Δ[tex]H_{1}[/tex] = -2,439 kJ.
The second equation is: 4 [tex]PCl_{6}[/tex](g) → [tex]P_{4}[/tex](s) + 10 [tex]Cl_{2}[/tex](g), with an enthalpy change of Δ[tex]H_{2}[/tex] = 3,438 kJ.
By reversing the first equation and multiplying the second equation by 4, we can cancel out [tex]P_{4}[/tex] (s) and [tex]Cl_{2}[/tex] (g) to obtain the overall reaction: [tex]PCl_{5}[/tex](g) → [tex]PCl_{3}[/tex](g) + [tex]Cl_{2}[/tex](g).
Since enthalpy change is a state function, we can sum up the enthalpy changes of the intermediate reactions to calculate the enthalpy change for the overall reaction:
Δ[tex]H_{overall}[/tex] = -2,439 kJ + 3,438 kJ = 999 kJ
explain why the first ionization energy of krypton is greater than the first ionization energy of bromine
Answer:
The atomic radius of krypton is similar to that of bromine. However, the effective nuclear charge of krypton is greater than that of bromine.
Explanation:
Ionizing an atom require moving an electron from the electron cloud of the atom to a point infinitely far away from the atom. The first ionization energy of this atom is the energy change in this process.
The electron and the nucleus are oppositely-charged. There is an electrostatic force between the two. Removing the electron requires overcoming this attraction. The size of the energy input depends on the electrostatic potential energy of the electron (the gravitational potential energy is much smaller than the electrostatic potential energy.) The separation between the electron and the nucleus is much larger than their radii. Both objects can be considered as point charges. Coulomb's Law gives the electrostatic potential energy of the two point charge that are close to each other.
[tex]\displaystyle \text{Electrostatic Potential Energy} = -\frac{k\cdot (q_1\cdot q_2)}{r}[/tex],
where
[tex]k[/tex] is Coulomb's constant,[tex]q_1[/tex] and [tex]q_2[/tex] are the two charges, and[tex]r[/tex] is the separation between the two charges.Krypton and bromine are right next to each other in the same period. Their atomic radii will be similar to each other. The separation [tex]r[/tex] between the outermost electron and the nucleus will also be similar for the two elements.
The first charge [tex]q_1[/tex] can be the electron. However, data show that for elements after helium, the second charge [tex]q_2[/tex] is smaller than the sum of charges on all protons in the nucleus. It turns out that the inner shell electrons (all of which are also negative) repel electrons in the outermost valence shell. The effective nuclear charge [tex]Z_\text{eff}[/tex] of a neutral atom is approximately the same as the number of protons minus the number of non-valence electrons. That number will be slightly larger for krypton than for bromine. As a result, the electrostatic potential energy on a 4p (the outermost orbital for both Kr and Br) electron of krypton will be more negative than that on a 4p electron in bromine. Removing that electron will take more energy in Kr than in Br. The first ionization energy of Kr is hence greater than that of Br.
Answer:
because if krypton has more protons, therefore it has a greater nuclear charge so the electron is harder to remove.
Explanation:
PLEASE HURRY WILL MARK BRAINLIEST
Of the planets listed, which planet is closes to the sun?
A. Saturn
B. Uranus (hehe)
C. Jupiter
D. Neptune
Answer:
C.) Jupiter
LOL ^_^
Explanation:
Answer: C) Jupiter
Explanation:
Which criterion is a requirement for naturalization as a US citizen? A. The person must be a lawful, permanent resident for five years. B. The person must read, write, and speak at least two languages. C. The person must be related to a natural or naturalized citizen. D. The person must be between the ages of 18 and 55 years old.
The person must be a lawful, permanent resident for five years.
Answer: A
The naturalization criterion that is a requirement for becoming a US citizen is being a lawful, permanent resident for five years. This is part of the naturalization process which includes being at least 18, having good moral character, and proficiency in English.
The requirement for naturalization as a US citizen is: A. The person must be a lawful, permanent resident for five years. This criterion is part of a multi-step naturalization process that most foreign citizens must undergo to become citizens of the United States. An applicant must be at least 18 years of age, be a lawful permanent resident (green card holder), have resided in the United States as a lawful permanent resident for at least five years, have been physically present in the United States for at least 30 months, be a person of good moral character, and be able to speak, read, write and understand the English language. These requirements have evolved over time, with current laws simplifying the process for non-citizens serving in the military and increasing the importance of English language proficiency in the application process.
QUICK CHEMISTRY QUESTION WORTH 15 POINTS WILL MARK BRAINLIEST!
if the amount of energy required to break bonds in the reactants is more than the amount of energy released in forming bonds in the products, The chemical reaction is endothermic.
TRUE OR FALSE
Answer:
False
Explanation:
Select the correct locations on the periodic table.
Which two elements have similar characteristics?
Explanation:
It is known that atoms that have same number of valence electrons will show similar chemical properties.
So, when we move from left to right across a period there occurs increase in number of valence electrons of each element. But when we move down a group then number of valence electrons remain the same.
Hence, elements of same group will show similar chemical properties.
Therefore, we can conclude that elements marked as 2 and 3 will have similar chemical properties.
Answer : The correct location on the periodic table of two elements have similar characteristics is, two elements present in the second column of the left side
Explanation :
The elements have similar characteristics when they are belong to the same family or group this means that when they are placed in the same column of the periodic table.
The elements of similar characteristics have same number of valence electrons.
In the given periodic table of the elements, the two elements present in the second column of the left side have similar characteristics because these two elements belong to the same family or group. While the other elements have different characteristics.
Energy travels from the sun to earth. Some of this energy is absorbed by particles in the atmosphere. The transfer of heat to particles in the atmosphere is an example of ___.
Answer:
radiation
Explanation:
Heat transfer is the process of propagating heat in different media. Three types of heat transfer are known: conduction, convection and radiation
The transfer by radiation is given at a distance. In fact, at any distance, as long as there is nothing that absorbs that energy along the way, and does not need a means to propagate.
What light color passes through the atmosphere and refracts toward the moon? A. Orange B. Blue C. Red D. Green
Red color passes through the atmosphere and refracts toward the moon
Further explanationWhat light color passes through the atmosphere and refracts toward the moon?
A. Green B. Blue C. Orange D. RedRed light color passes through the atmosphere and refracts toward the moon.
The straight red arrow passing from the surface through the atmosphere represents the fraction of the emitted infrared radiation that passes into space through the atmosphere without change. Red-colored light is scattered very little. However it is refracted or bent inward towards the Moon. Red light that hits the Moon is reflected back toward Earth, therefore we see the Moon glowing red during totality.
Red is the color at the end of the visible spectrum of light. It is next to orange and opposite violet. It has a dominant wavelength of approximately 625–740 nanometres. Red is a primary color in the RGB color model and the CMYK color model, and is the complementary color of cyan.
Hope it helps!
Learn moreLearn more about the atmosphere https://brainly.com/question/9566580Learn more about the moon https://brainly.com/question/8581626Learn more about light color https://brainly.com/question/9090729Answer details
Grade: 9
Subject: chemistry
Chapter: color
Keywords: the atmosphere, the moon, light color, refracts, Orange
Answer:
C. RED
Just took the test and got it right.
Explanation: