Given the following equation: 2 Ca + O2 --> 2 CaO How many moles CaO produced from 4 moles O2?

Answers

Answer 1

8 moles of CaO produced from 4 moles O2.

Explanation:

Balanced chemical equation for the reaction:

2 Ca + O2 --> 2 CaO

Data given:

moles of O2 = 4

Moles of CaO =?

From the reaction it is seen that 1 mole of O2 is used in the reaction to produce 2 moles of CaO

hence, 4 moles of O2 will give x moles of CaO

[tex]\frac{2}{1}[/tex] = [tex]\frac{x}{4}[/tex]

x =8

So, 8 moles of CaO will be produced when 4 moles of O2 will be used in the reaction. Since oxygen is the limiting reagent in the reaction.


Related Questions

The form of energy that is stored in large objects because of its position above the ground is ____________ _________ energy.

Answers

Answer:

gravitational potential

Explanation:

Fill in the blanks

The form of energy that is stored in large objects because of its position above the ground is gravitational potencial energy.

Which type of radioactive decay only releases energy?

A gamma rays
B beta particles
C helium nucleus
D alpha particles

Answers

Answer:

A gamma rays

Explanation:

Gamma rays unlike beta and alpha particles releases energy and they are actual rays and not particles.

A gamma ray is  form of electromagnetic radiation with no mass and charge. Its energy could range from 10KeV to 3MeV.

Its range is not definite in any medium but much longer than those of alpha and beta particles. Intensity of the rays diminishes exponentially from the source.

Enter a chemical equation for NaOH(aq) showing how it is an acid or a base according to the Arrhenius definition. Consider that strong acids and bases dissociate completely.

Answers

Answer:

NaOH(aq) is a Base.

Explanation:

Those substances which give or release [tex]OH^{-}[/tex] ions in aqueous solution are called as the Arrhenius Bases.

In the aqueous solution, NaOH dissociates as follows -

[tex]NaOH^{}[/tex] ↔ [tex]Na^{+} + OH^{-}[/tex]

If it reacts with a strong acid HCl, the chemical equation for this reaction will be as follows -

[tex]HCl + NaOH = NaCl + H_{2} O[/tex]

The chemical equation that shows how NaOH is a base according to the Arrhenius definition is

NaOH(aq) → Na⁺(aq) + OH⁻(aq)

According to Arrhenius definition

An acid any substance that ionizes when it dissolves in water to give the hydrogen ion (H⁺)

A base is any substance that ionizes when it dissolves in water to give the hydroxide ion (OH⁻)

Now, we will write a chemical equation that shows the dissociation of NaOH in water.

The chemical equation for the dissociation of NaOH in water is

NaOH(aq) → Na⁺(aq) + OH⁻(aq)

Since, NaOH dissociates in water to the hydroxide ion (OH⁻), then it is a base according Arrhenius definition.

Hence, the chemical equation that shows how NaOH is a base according to the Arrhenius definition is

NaOH(aq) → Na⁺(aq) + OH⁻(aq)

Learn more here: https://brainly.com/question/15062109

A balloon is filled with 2000 mL of air at a pressure of 2 atm. What is the volume of the balloon if the pressure is
changed to 5 atm?

Answers

Answer:

800mL

Explanation:

Using Boyle's law which states that the volume of a given mass of gas is inversely proportional to the pressure, provided temperature remains constant

P1V1= P2V2

P1 = 2 atm, V1 = 2000mL ,

P2 = 5atm , V2 = ?

2 × 2000 = 5 × V2

Divide both sides by 5

V2 = 4000 ÷ 5

V2 = 800mL

I hope this was helpful, please mark as brainliest

Final answer:

The volume of a balloon filled with 2000 mL of air at 2 atm will change to 800 mL when the pressure is increased to 5 atm, as per Boyle's Law, which states that pressure and volume are inversely proportional for a gas at constant temperature.

Explanation:

The principles of gas laws, specifically Boyle's Law, which implies that for a given mass and constant temperature of an ideal gas, the pressure and volume are inversely proportional. We can set up a direct application of Boyle's Law where P1 * V1 = P2 * V2. Given that a balloon is filled with 2000 mL of air at a pressure of 2 atm (P1 and V1), we want to find the new volume (V2) if the pressure is changed to 5 atm (P2).

Using the formula, we can solve for V2 as follows:

V2 = (P1 * V1) / P2

V2 = (2 atm * 2000 mL) / 5 atm

V2 = 4000 mL atm / 5 atm

V2 = 800 mL

Therefore, the volume of the balloon when the pressure is increased to 5 atm is 800 mL.

which of the following describes resistance?

completely stops electron flow

impedes the flow of electrons

is an insulator

has to do with the voltage in the circuit ​

Answers

Answer:

impedes the flow of electrons

Explanation:

When electricity flowing in a circuit, that means the electron is flowing there too. All objects have resistance which tells how much the material impedes the flow of electron, which in turn will lower the current flowing on the circuit. It won't stop the flow completely. Material with high resistance will be called insulator and material with low resistance called a conductor.

Identify each definition that applies to the compound in red. Check all that apply.
Arrhenius acid

Bronsted-Lowry acid

Arrhenius base

Bronsted-Lowry base

Answers

Answer:

C. Bronsted-Lowry base

Explanation:

Also the same answer is for...

The compound given in red Mg(OH)2 is Option(C) Arrhenius base and Option(D) Bronsted-Lowry base.

What is Arrhenius and Bronsted-Lowry theory ?

Arrhenius theory states that acids are substances that dissociate in water to yield electrically charged atoms or molecules, called ions, one of which is a hydrogen ion (H+), and that bases ionize in water to yield hydronium ions (OH−).

According to Bronsted-Lowry theory, acid is a substance which donates an H+ ion and forms its conjugate base and the base is a substance which accepts an H+ ion and forms its conjugate acid.

Checking the compound in red, Mg(OH)2 -

The compound given Magnesium Hydroxide Mg(OH)2 is an Arrhenius base therefore it is also a Bronsted-Lowry base. Magnesium Hydroxide accepts the hydronium ion from the product thereby forming the conjugate acid. Magnesium Hydroxide also dissolves in water in neutral medium to yield hydronium ions (OH−).

Therefore, the compound given in red Mg(OH)2 is Option(C) Arrhenius base and Option(D) Bronsted-Lowry base.

To learn more about Arrhenius and Bronsted-Lowry theory, refer -

https://brainly.com/question/12581092

#SPJ2

A man weighing 75 kg takes 5 minutes to reach a height of 5 m when he climbs a staircase. What is his power?
A) 1.250 W
B) 12.25 W
C) 31.25 W
D) 61.25 W

Answers

Answer: B. 12.25 W

please give brainliest!

Explanation:

1) Force = Weight = 75 x 9.8 = 735 N

2.)Work = Force x Height = 735 x 5 = 3675 J

3.)Power = Work / Time = 3675 / (5 x 60) = 12.25 W

Complete the following sentences:

a In an exothermic reaction, the energy transferred to the surroundings from forming new bonds is _______ than the energy needed to break existing bonds.  

b In an endothermic reaction, the energy transferred to the surroundings from forming new bonds is _______ than the energy needed to break existing bonds.  

c The energy change of an exothermic reaction has a ____________ sign.  

d The energy change of an endothermic reaction has a ____________ sign.  


Answers

Answer:

Explanation:

a) In an exothermic reaction, the energy transferred to the surroundings from forming new bonds is ___more____ than the energy needed to break existing bonds.  

b) In an endothermic reaction, the energy transferred to the surroundings from forming new bonds is ___less____ than the energy needed to break existing bonds.  

c) The energy change of an exothermic reaction has a _____negative_______ sign.  

d) The energy change of an endothermic reaction has a ____positive________ sign.

The energy changes occur during the bonds formation and bonds breaking.

There are two types of reaction endothermic and exothermic reaction.

Endothermic reactions:

The type of reactions in which energy is absorbed are called endothermic reactions.

In this type of reaction energy needed to break the bond are higher than the energy released during bond formation.

For example:

C + H₂O   →  CO  + H₂

ΔH = +131 kj/mol

it can be written as,

C +  H₂O  + 131 kj/mol  →  CO  + H₂

Exothermic reaction:

The type of reactions in which energy is released are called exothermic reactions.

In this type of reaction energy needed to break the bonds are less than the energy released during the bond formation.

For example:

Chemical equation:

C + O₂   →  CO₂

ΔH = -393 Kj/mol

it can be written as,

C + O₂   →  CO₂ + 393 Kj/mol

At what temperature will .07 moles of CL2 exert a pressure of 1.18 atm at a volume of 750 mL? ______K

Answers

Answer:

T = 154 K

Explanation:

Given data:

Number of moles of Cl₂ = 0.07 mol

Pressure = 1.18 atm

Volume = 750 mL

Temperature = ?

Solution:

The given problem will be solve by using general gas equation, which is,

PV = nRT

R = general gas constant (0.0821 atm.L/mol.K)

Now we will convert the mL to L.

Volume = 750 mL × 1 L/1000 mL

Volume = 0.75 L

Now we will put the values in formula.

T = PV/nR

T = 1.18 atm × 0.75 L / 0.07 mol ×0.0821 atm.L/mol.K

T = 0.885/0.00575 /K

T = 154 K

What is the difference between Electron Geometry and Molecular Geometry?

Answers

Answer:

Electron Geometry describes arrangement is electron groups & Molecular Geometry describes the arrangement of atoms

Explanation:

The picture above better explains it, hopefully this helps :)

 Find the molar mass of Strontium nitride, Sr3N2.​

Answers

Final answer:

The molar mass of Strontium nitride (Sr3N2) is calculated by multiplying the molar masses of strontium and nitrogen by their respective number of atoms in the formula and adding the products together, resulting in 290.88 g/mol.

Explanation:

To find the molar mass of Strontium nitride (Sr3N2), you must first determine the molar masses of strontium (Sr) and nitrogen (N) from the periodic table. The molar mass of strontium is 87.62 g/mol. Since there are three strontium atoms in Sr3N2, you would multiply 87.62 g/mol by 3. The molar mass of nitrogen is 14.01 g/mol, and there are two nitrogen atoms in Sr3N2, so multiply 14.01 g/mol by 2.

Then you add the molar masses of strontium and nitrogen together:

3 x 87.62 g/mol for Sr = 262.86 g/mol2 x 14.01 g/mol for N = 28.02 g/mol

Finally, sum these values to find the molar mass of Sr3N2:

Molar mass of Sr3N2 = 262.86 g/mol + 28.02 g/mol = 290.88 g/mol.

A neutral atom has the following electron configuration:

What is the chemical symbol for the atom?

[Ne] 3s^2 3p^2

How many electrons does the atom have?
How many electrons are in the atom?

Answers

Si  is the chemical symbol for the atom. 14 is the total number of electrons according to the given electron configuration.

chemical symbol, abbreviation for a chemical element's scientific name; for example, S for sulphur or Si for silicon. Sometimes the sign comes from the Latin term; for example, Au stands for aurum, or gold, and Na stands for natrium, or sodium. The current chemical symbols illustrate how the theory of atoms of matter has systematised chemistry. John Dalton, an English chemist who adopted the alchemists' practise of depicting the elements in pictures, achieved the significant advancement of allowing his symbols to be used.

The total number of electrons  2+2+6+2+2 = 14

atomic number =14.

Atomic number 14 is Silicon with symbol Si.

To know more about chemical symbol, here:

https://brainly.com/question/9249660

#SPJ6

Final answer:

A neutral phosphorus atom has 15 electrons. The electron configuration is 1s²2s²2p63s²3p³.

Explanation:

A neutral phosphorus atom has 15 electrons. Two electrons can go into the 1s subshell, 2 can go into the 2s subshell, and 6 can go into the 2p subshell. That leaves 5 electrons. Of those 5 electrons, 2 can go into the 3s subshell, and the remaining 3 electrons can go into the 3p subshell. Thus, the electron configuration of neutral phosphorus atoms is 1s²2s²2p63s²3p³.

If I have 21 liters of gas held at a pressure of 78 atm and a temperature of 900 K, what will
be the volume of the gas if I decrease the pressure to 45 atm and decrease the
temperature to 750 K?

Answers

Answer:

30.33L

Explanation:

Using Boyle's law which states that the volume of a given mass of gas is inversely proportional to the pressure, provided temperature remains constant  and Charles law states that the volume of a given mass of gas is directly proportional to the temperature provided the pressure remains constant

P1V1/T1 = P2V2/ T2

P1 =  78atm, V1 = 21L , T1 = 900K

P2 = 45atm, V2 = ? , T2 =750K

78× 21 / 900 = 45×V2 / 750

1638/900 = 45 V2 / 750

1638×750 = 900×45V2

1228500 = 40500V2

Divide both sides by 40500

1228500÷40500= V2

V2 = 30.33L

I hope this was helpful, please mark as brainliest

Using the combined gas law, we determined the final volume of the gas to be 30.33 liters.

To solve this problem, we'll use the combined gas law, which is expressed as:

(P₁ * V₁) / T₁ = (P₂ * V₂) / T₂

Here, P₁, V₁, and T₁ are the initial pressure, volume, and temperature, and P₂, V₂, and T₂ are the final pressure, volume, and temperature.

We are given the following values:

P₁ = 78 atm

V₁ = 21 liters

T₁ = 900 K

P₂ = 45 atm

T₂ = 750 K

We need to find V₂. Rearrange the combined gas law to solve for V₂:

V₂ = (P₁ * V₁ * T₂) / (T₁ * P₂)

Substitute the given values into the equation:

V₂ = (78 atm * 21 liters * 750 K) / (900 K * 45 atm)

Calculate the result step-by-step:

78 * 21 = 1638

1638 * 750 = 1228500

900 * 45 = 40500

V₂ = 1228500 / 40500 = 30.33 liters

Therefore, the final volume, V₂, is 30.33 liters.

how do astronomers explain the formation of the milky way galaxy

Answers

Galaxy Formation.  One says that galaxies were born when vast clouds of gas and dust collapsed under their own gravitational pull, allowing stars to form. The other, which has gained strength in recent years, says the young universe contained many small "lumps" of matter, which clumped together to form galaxies.

1. What is the mass of 25.0 L of neon at STP?

Answers

Answer: m= 22.2 g Ne

Explanation: First find the moles of Ne using Ideal Gas Law and derive for n. So from PV= nRT the mole is derived as n = PV /RT

n = PV / RT

= 1 atm ( 25 L ) / 0.0821 L.atm /

mole.K ( 273 K )

= 1.11 moles Ne

Convert it to mass using the molar mass of Neon

1.11 moles Ne x 20 g Ne / 1 mole Ne

= 22.2 g Ne

Final answer:

The mass of 25.0 L of neon at STP is approximately 22.43 grams, calculated by using the molar volume of a gas at STP and the molar mass of neon.

Explanation:

To calculate the mass of neon at standard temperature and pressure (STP), we can use the molar mass of neon and the ideal gas law. At STP, one mole of any ideal gas occupies 22.4 L. Since we are given the volume of neon gas as 25.0 L, we can calculate the number of moles (n) of neon first:

n = Volume / Molar Volume at STP
n = 25.0 L / 22.4 L mol⁻¹ = 1.116 mol

The molar mass of neon (Ne) is approximately 20.11 g mol⁻¹. We use the calculated moles to find the mass:

mass = n × molar mass
mass = 1.116 mol × 20.11 g mol⁻¹ = 22.43 g

So, the mass of 25.0 L of neon at STP is approximately 22.43 grams.

What purpose do cooling towers serve in a nuclear power plant?

A. to retain the nuclear gases emitted from the nuclear reactions
B. to provide a location for the heated water to cool and condense
C. to maintain the high temperatures required for the nuclear reactions
D. to act as a barrier to contain radiation in case of a possible meltdown

Answers

B. To provide a location for the heated water to cool and condense.

Answer:

B

Explanation:

Cooling towers provide an energy efficient and environmentally friendly way of removing heat from this circulating water before it is returned to its source.

More than three fourths of the air we breathe is oxygen

Answers

Answer:

False.

Explanation:

The Earth's atmosphere is composed of 78% Nitrogen & 21% Oxygen. The other 1% varies.

A sample of water drops from an initial temperature of 67.5 C to a final temperature of 25.2 C. If -4425 J of heat were released from this sample of water, what is the mass of the sample?

Answers

Answer:

mass = 25.03 g

Explanation:

Given data:

Initial temperature = 67.5°C

Final temperature = 25.2°C

Heat released = -4425 j

Mass of water = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 25.2°C - 67.5°C

ΔT = -42.3°C

Specific heat of water = 4.18 j/g.°C

Q = m.c. ΔT

-4425 j = m × 4.18 j/g.°C × -42.3°C

-4425 j = m × -176.81 j/g

m = -4425 j /  -176.81 j/g

m = 25.03 g

The mass of the sample of water is approximately 250 grams.

To find the mass of the water sample, we can use the formula for the heat released or absorbed by a substance undergoing a temperature change:

[tex]\[ q = m \cdot c \cdot \Delta T \][/tex]

where:

[tex]- \( q \)[/tex] is the heat released or absorbed (in joules),

[tex]- \( m \)[/tex] is the mass of the substance (in grams),

[tex]- \( c \)[/tex] is the specific heat capacity of the substance (in joules per gram per degree Celsius),

[tex]- \( \Delta T \)[/tex] is the change in temperature (in degrees Celsius).

For water, the specific heat capacity [tex]\( c \)[/tex] is approximately [tex]\( 4.184 \, \text{J/g}^\circ \text{C} \)[/tex].

Given:

[tex]- \( q = -4425 \, \text{J} \)[/tex] (the negative sign indicates heat is released),

[tex]- \( \Delta T = 67.5^\circ \text{C} - 25.2^\circ \text{C} = 42.3^\circ \text{C} \),[/tex]

[tex]- \( c = 4.184 \, \text{J/g}^\circ \text{C} \).[/tex]

We can rearrange the formula to solve for [tex]\( m \)[/tex]:

[tex]\[ m = \frac{q}{c \cdot \Delta T} \][/tex]

Now, plug in the values:

[tex]\[ m = \frac{-4425 \, \text{J}}{4.184 \, \text{J/g}^\circ \text{C} \cdot 42.3^\circ \text{C}} \] \[ m = \frac{-4425}{4.184 \times 42.3} \] \[ m \approx \frac{-4425}{177.3172} \] \[ m \approx -25 \][/tex]

Since mass cannot be negative, we take the absolute value of the result:

[tex]\[ m \approx 250 \, \text{g} \][/tex]

Therefore, the mass of the sample of water is approximately 250 grams.

Name another career that combines science with another interest .

Answers

Answer Archeology

Explanation:

You like to dig holes? ARCHEOLOGY

(DUE 4:00 AM PLEASE HELP!)
Carbon has an atomic number of 6 and an atomic mass of 12.011.

Carbon-12, Carbon-13, and Carbon-14 are all isotopes of carbon.


What is the difference between those three isotopes?

Answers

Answer:

Explanation:

Isotopes, by definition, are a set of elements having the same Atomic No. (# protons) but different Atomic Masses due to variations in number of neutrons.

Isotope       #p⁺       #n°    #e⁻ (neutral element)

C-12               6         6            6

C-13               6         7            6

C-14               6         8            6

Temperature is ____ related to the average kinetic energy of a gas.

inversely

directly

not

disproportionally

Answers

Answer:

directly

Explanation:

Temperature is defined as the average kinetic energy per particle of a gas, hence temperature and average kinetic energy are directly related meaning that if kinetic energy of a gas increases temperature will also increase.

Directly related to the average kinetic energy

What does a wave do?
O
A. It repels charges that are alike.
O
B. It converts matter into energy.
C. It attracts particles over a distance.
O
D. It moves energy through space.
SUBMIT

Answers

Answer:

D. It moves energy through space

Explanation:

i searched it

At equilibrium the partial pressures of N2O4 and NO2 are 0.35 atm and 4.3 atm. What is the Kp

Answers

Final answer:

The equilibrium constant, Kp, can be calculated using the formula Kp = (PNO2)^2 / PN2O4, where PNO2 and PN2O4 are the partial pressures of NO2 and N2O4 at equilibrium. In this case, the given partial pressures are 0.35 atm and 4.3 atm, respectively. By substituting these values into the formula, we find that Kp is approximately 52.37.

Explanation:

The equilibrium constant, Kp, is a measure of the ratio of the product pressures to the reactant pressures at equilibrium. In this case, we are given the partial pressures of N2O4 (0.35 atm) and NO2 (4.3 atm) at equilibrium. Since Kp is defined as the ratio of product pressures to reactant pressures, we can calculate Kp using the formula Kp = (PNO2)2 / PN2O4.


Substituting the given values into the formula gives Kp = (4.3)2 / 0.35 = 52.37. Therefore, the equilibrium constant Kp is approximately 52.37.

Learn more about Calculating Equilibrium Constant here:

https://brainly.com/question/32580244

#SPJ3

The equilibrium constant (Kp) for the equilibrium between [tex]NO_2[/tex] and [tex]N_2O_4[/tex] with given partial pressures is 0.0189.

The degree of thermodynamic activity of a gas corresponds to its partial pressure.

To calculate the equilibrium constant (Kp) for the reaction 2 [tex]NO_2[/tex](g) = [tex]N_2O_4[/tex] (g), we use the following equilibrium expression:

[tex]Kp = (PN_2O_4) / (PNO_2)2[/tex]

Given the partial pressures at equilibrium, [tex]PN_2O_4 = 0.35[/tex] atm and [tex]PNO_2 = 4.3[/tex] atm, we can substitute these values into the equation to find the Kp:

Kp = (0.35) / (4.3)2

After squaring the partial pressure of [tex]NO_2[/tex] and dividing by the partial pressure of [tex]N_2O_4[/tex], we get:

Kp = 0.35 / 18.49

Kp = 0.0189 (to four significant figures)

When energy is changed from one form to another, _____.
A. a physical change occurs
B. all of the energy can be accounted for
C. some of the energy is lost entirely
D. all of the energy is changed to a useful form
(please explain why)

Answers

Answer:

Since energy cannot be created or destroyed and it can only change form or be transferred from one object to another.

The total amount of energy and matter in the Universe remains constant, merely changing from one form to another. The First Law of Thermodynamics (Conservation) states that energy is always conserved, it cannot be created or destroyed. In essence, energy can be converted from one form into another.

Hope this helps! If so please mark brainliest and rate/heart to help my account if it did!!

The correct option is option B. All of the energy can be accounted for.

According to the energy conservation principle, no matter how energy is transformed, its overall quantity never changes. Energy can only be changed from one form to another; it cannot be created or destroyed. The law of conservation of energy is the term used to describe this idea.

According to the law of conservation of energy, the total energy before and after conversion is the same.

Therefore, all of the energy involved in a transformation can be accounted for.

Learn more about the conservation of energy here:

https://brainly.com/question/13949051

#SPJ 2

A gas has a volume of 490. mL at a temperature of -35.0 degrees C. What volume would the gas occupy at 42.0 degrees Celsius? Please show work so I can understand it. Will Mark Brainlest for the best answer : )

Answers

Answer:

V₂ = 648.53 mL

Explanation:

Given data:

Initial volume of gas = 490. mL

Initial temperature = -35°C (-35 + 273 = 238 k)

Final temperature = 42°C =  (42+273 = 315 k)

Final volume = ?

Solution:

The given problem will be solve through the Charles Law.

According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.

Mathematical expression:

V₁/T₁ = V₂/T₂

V₁ = Initial volume

T₁ = Initial temperature

V₂ = Final volume  

T₂ = Final temperature

Now we will put the values in formula.

V₁/T₁ = V₂/T₂

V₂ = V₁T₂/T₁  

V₂ = 490 mL × 315 K / 238 k

V₂ = 154350 mL.K / 238 K

V₂ = 648.53 mL

What is the mass of a piece of iron if it absorbs 5575 joules of heat and its specific heat capacity is 0.95 J/g°C? The initial temperature of the iron is 20.0°C and is raised to 30°C.



Only include numbers and the decimal point in your answer. If necessary, round to the hundredths (two spots to the right of the decimal point) place. For example "34.22."

Answers

Answer:

The mass of iron piece = 586.84

Explanation:

Given,

Heat absorbed by iron piece(Q) = 5575 Joules.

specific heat capacity(Cp) = 0.95 J/g°C.

initial temperature(T₁) = 20.0°C

Final temperature(T₂) = 30.0°C

Mass of iron piece(m) = ?

The mass of iron piece can be calculated by using the formula ,

Q = (mass) (ΔT) (Cp)

Here, ΔT = T₂ - T₁ = 30°C - 20°C = 10°C

Substituting values we get,

5575 = (m)(10)(0.95)

Solving, we get,

m = 586.84 grams.

Therefore, mass of iron piece = 586.84 grams.

What volume of 12 molar hydrochloric acid could be needed to create 1 L of a 1 molar solution of hydrochloric acid?

Answers

80 ml or 0.08 L of 1M HCl is needed to make 12 M HCl.

Explanation:

We have to use the law of Volumetric Analysis, to find the volume of the 12M solution using the volume and the molarity of the known solution of hydrochloric acid, using the law as,

V₁M₁ = V₂M₂

The above equation can be rewritten to find the volume as,

[tex]$ V2 = \frac{V1M1}{M2}[/tex]

Plugin the given values as,

[tex]$ V2 = \frac{1L\times 1M}{12 M}[/tex]  = 0.08 L or 80 ml

We dissolve 5g of sugar, C12H22O11, in water to make 1L solution. What is the concentration of this solution expressed as molarity.

Answers

Answer: M = 0.01 M C12H22O16

Explanation: First convert the mass of C12H22O16 into moles using the molar mass of the compound.

5 g C12H22O16 x 1 mole C12H22O16 / 342 g C12H22O16

= 0.01 mole C12H22O16

To calculate the molarity we will use the following formula.

M = n / L

= 0.01 mole / 1 L

= 0.01 M C12H22O16

Final answer:

To find the molarity of a sugar solution with 5g of sucrose in 1L of water, calculate the moles of sucrose and divide by the volume. The molarity of this solution is 0.01 M C12H22O16

Explanation:

The question asks to find the molarity of a sugar solution which is made by dissolving 5g of sucrose (C12H22O11) in enough water to make a 1L solution. First, we need to find the molar mass of sucrose, which is the sum of the atomic masses of its constituent elements: 12 carbons, 22 hydrogens, and 11 oxygens. The molar mass of sucrose is (12 × 12.011) + (22 × 1.008) + (11 × 15.999) = 342.30 g/mol. Now, we calculate the number of moles of sucrose present in 5g and then divide by the volume of the solution in liters to get the molarity.

First convert the mass of C12H22O16 into moles using the molar mass of the compound.

5 g C12H22O16 x 1 mole C12H22O16 / 342 g C12H22O16

= 0.01 mole C12H22O16

To calculate the molarity we will use the following formula.

M = n / L

= 0.01 mole / 1 L

= 0.01 M C12H22O16

Why does a metal spoon left on a bowl of hot soup become warm?

Answers

Explanation:

We know that metals are good conductor of heat. so it allows the heat to flow through them

. So as we know the spoon is a metal which is left on a bowl of hot soup allows heat to flow through it easily so if becomes warm.

Answer: A) metal is a conductor

Explanation:

What best describes the path of the gas particles in a given
sample of gas?
straight path, unaffected by collisions with other
particles
straight path which changes upon collisions with
other particles
curved path which changes upon collisions with
other particles
curved path, unaffected by collisions with other
particles

Answers

It would be straight path with changes upon collisions which other particles.

The statement which best describes the path of the gas particles in the sample of gas is the straight path which changes upon collisions with other particles.

What are gaseous state?

Gaseous state is one of the state of matter in which particles are present at great distance from each other with random arrangement.

In a sample of gas, firstly gases particles will move in a straight line till then collision with another gas particle takes place. After the collision path of the gas particle changes and keeps on changes with the additional collision.

Hence firstly gas particles are move in a straight line.

To know more about gaseous state, visit the below link:

https://brainly.com/question/16982523

Other Questions
Which is a rational number between -12 and -11.25?A.)-12.45B.)-11.45C.)11.45D.)not given What are the four primary traits that help determine the value of information? List the following aqueous solutions in order of decreasing boiling point. 0.120 mm glucose, 0.050 m LiBrm LiBr, 0.050 m Zn(NO3)2m Zn(NO3)2 . Rank items in order of decreasing boiling point. What did it take to get the State of North Carolina to finally stop its eugenics program in 1974? A chemistry student needs of isopropenylbenzene for an experiment. He has available of a w/w solution of isopropenylbenzene in acetone. Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button. 7 2/3 is the product of a number x and 2 1/8. Write the word sentence as an equation. Nearly all conventional piston engines have flywheels on them to smooth out engine vibrations caused by the thrust of individual piston firings. Why does the flywheel have this effect Which type of bank account typically offers the least interest? WILL MARK BRAINLIEST!To what extent do Sources B and C agree about the way Senator Douglas conducted his campaign? (I)how many atoms are present in 7g of lithium?(Ii)How many atoms are present in 24g of carbon?Calculate the number of moles in each of these substances 19g of fluorine, F222g of carbon dioxide, CO217g of hydroxide, OH- ions Cheese manufacturer Ashe Mountain Corp. started a new chain of movie theaters called Ashe Mountain's Movie World. The theaters have been a major success and significantly increased the revenues of Ashe Mountain Corp. This is an example of:___________________.A. DiversificationB. Market developmentC. Product penetrationD. DifferentiationE. Market penetration Puedo pagar mis facturas ____________ por internet. Slo me toma unos pocos minutos.Es importante que Eduardo lea los formularios del banco ____________ para entender bien las reglas del banco.____________ ella usa la banca en lnea porque no le gusta hacer transacciones en lnea.Es bueno usar la tarjeta de dbito, ____________ cuando uno va al supermercado. The _____________ is a system of universally accepted standards for storing, retrieving, formatting, and displaying information through a __________ architecture. Which type of ad agency is most likely to offer its clients an extensive range of marketing, communications, and promotions services, including planning, creating, and producing the advertising; performing research; and selecting media? A. A creative boutiqueB. A full-service agencyC. A media buying serviceD. A collateral agencyE. A switch marketing agency Although it can be expensive for businesses to implement operational efficiency, this cost produces greater quality results. For organizations with multiple divisions, developing processes once and repeating them saves time. True False HELPPPPPPPP PLEASEEE A tank contains 70 kg of salt and 1000 L of water. Water containing 0.4kgL of salt enters the tank at the rate 16 Lmin. The solution is mixed and drains from the tank at the rate 4 Lmin. A(t) is the amount of salt in the tank at time t measured in kilograms. If you know how many rings Kobe have comment below and a blessing will come to you. #824 what is the area of the shaded sector The declaration of independence is a formal statement written by Thomas Jefferson. This document was written in 1776 which the American colonists proclaimed their independence from Great Britain. T/F