Answer:
You must remove [tex]\text{50.6 kJ}[/tex] .
Explanation:
There are three heat transfers in this process:
Total heat = cool the vapour + condense the vapour + cool the liquid
q = q₁ + q₂ + q₃
q = nC₁ΔT₁ + nΔHcond + nC₂ΔT₂
Let's calculate these heat transfers separately.
Data:
You don't give "the data below", so I will use my best estimates from the NIST Chemistry WebBook. You can later substitute your own values.
C₁ = specific heat capacity of vapour = 90 J·K⁻¹mol⁻¹
C₂ = specific heat capacity of liquid = 115 J·K⁻¹mol⁻¹
ΔHcond = -38.56 kJ·mol⁻¹
Tmax = 300 °C
b.p. = 78.4 °C
Tmin = 25.0 °C
n = 0.782 mol
Calculations:
ΔT₁ = 78.4 - 300 = -221.6 K
q₁ = 0.782 × 90 × (-221.6) = -15 600 J = -15.60 kJ
q₂ = 0.782 × (-38.56) = -30.15 kJ
ΔT = 25.0 - 78.4 = -53.4 K
q₃ = 0.782 × 115 × (-53.4) = -4802 J = 4.802 kJ
q = -15.60 - 53.4 - 4.802 = -50.6 kJ
You must remove [tex]\text{50.6 kJ}[/tex] of heat to convert the vapour to a gas.
To find the total heat needed to convert the gaseous ethanol to liquid, one must first consider the cooling of the gaseous ethanol, then the condensation of the gaseous ethanol, and lastly cooling the liquid ethanol to 25 degrees Celsius. Each step requires a specific calculation, and the final heat value is the sum of all energies calculated in these three steps, with all values converted to the same energy unit for accuracy.
Explanation:We first need to handle the cooling of the gaseous ethanol. For this, we'll use the specific heat capacity ... Given that the heat capacity (cv) of ethanol is about 75 J/mol*K (approximated because the exact value can vary), the heat loss (q1) could be calculated in this way:
q = cv * n * ΔT = 75J/mol*K * 0.782mol * (300-25)K
Subsequently, for condensation, we'll use the heat of condensation ... Assuming the heat of condensation of ethanol to be around 38.56 kJ/mol (procured from a standard table or book), we get:
q = ΔHvap * n = 38.56 kJ/mol * 0.782 mol
Lastly, we need to consider cooling the liquid ethanol to 25°C ... Therefore, knowing that the specific heat of liquid ethanol is about 112 J/mol*K:
q = c * n * ΔT = 112J/mol*K * 0.782mol * (78.37-25)K
Summing all these energies, then converting to an identical energy unit, gives you the total energy required.
Learn more about Heat Calculations for Ethanol here:https://brainly.com/question/20039043
#SPJ12
What will be the cell potential for a cu−zn galvanic cell with [zn2+]=0.1 m and the [cu2+]=0.01 m? view available hint(s)?
Answer: 1.07 V
Explanation: [tex]E^0_{[Zn^{2+}/Zn}=-0.76V[/tex]
[tex]E^0_{[Cu^{2+}/Cu]}=+0.34V[/tex]
The metal with negative reduction potential will easily lose electrons and thus is oxidized and the one with positive reduction potential will easily gain electrons and thus is reduced.
[tex]Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu[/tex]
[tex]E^o_{cell}[/tex] = standard electrode potential =[tex]E^0_{cathode}- E^0_{anode}=0.34-(-0.76)=1.1V[/tex]
Using Nernst equation:
[tex]E_{cell}=E^o_{cell}-\frac{0.0592}{n}\log \frac{[Zn^{2+}]}{[Cu^{2+}]}[/tex]
where,
n = number of electrons in oxidation-reduction reaction = 2
[tex]E_{cell}=1.10-\frac{0.0592}{2}\log \frac{[0.1]}{[0.01]}[/tex]
[tex]E_{cell}=1.07V[/tex]
A balanced chemical equation shows the proportions of reactants and products necessary for a. the reaction to occur. c. energy use to be minimized. b. mass to be conserved. d. electrolysis to occur.
Answer:
a
Explanation:
Answer: Option (b) is the correct answer.
Explanation:
A balanced equation is defined as the equation where number of atoms of the reactant equal to the number of atoms of the product.
This also means that mass of the reactants is equal to the mass of products in a chemical equation.
For example, [tex]2Na + Cl_{2} \rightarrow 2NaCl[/tex]
Total mass of reactants = [tex][(2 \times 23) + (35 \times 2)] g/mol[/tex]
= 116 g/mol
Total mass of products = [tex]2 \times (23 + 35)[/tex] g/mol
= 116 g/mol
Hence, mass if conserved in a chemical reaction.
thus, we can conclude that a balanced chemical equation shows the proportions of reactants and products necessary for mass to be conserved.
Which are true comparisons of alpha and beta decay? Check all that apply.
A. Beta radiation damages a cell more than alpha radiation.
B. Beta radiation can damage a higher number of cells than alpha
radiation.
C. Beta particles can travel farther than alpha particles.
D. Beta particles are bigger than alpha particles.
Answer:
See below
Explanation:
A. False. Alpha radiation is more damaging to the cell than beta radiation.
B. True. Beta radiation is less damaging, but it has greater penetrating power, so it can damage more cells.
C. True. Beta particles have greater penetrating power than alpha particles.
D. False. Beta particles are electrons. Alpha particles are much larger helium nuclei.
Answer:
False
True
True
False
Explanation:
Option A is False. Alpha radiation transfers more energy to the absorbing material than a beta particle. So alpha rays damage more cells than beta radiation.
Option B is True. Beta cells are more penetrating than alpha cells, hence they wreck more havoc.
Option C is True. Having smaller mass beta particles can travel farther, they penetrate through the skin and are absorbed by the body tissues. Alpha particles are heaver and don’t go past the skin cells.
Option D is False. Beta particles are fast moving electrons with a negative charge where alpha particles are made up of two neutrons and two protons and so it is a +2 charged helium nucleus.
A sample of pure calcium fluoride with a mass of 15.0 g contains 7.70 g of calcium. How much calcium is contained in 40.0 g of calcium fluoride?
To find how much calcium is contained in 40.0 g of calcium fluoride, calculate the moles of calcium fluoride and then determine the moles of calcium using its mass. 40.0 g of calcium fluoride contains 0.192 mol of calcium.
Explanation:To calculate the amount of calcium in 40.0 g of calcium fluoride, we need to first determine the molar mass of calcium fluoride (CaF2), which is 78.08 g/mol. Next, we can calculate the moles of calcium fluoride in 40.0 g using the formula:
Moles = Mass / Molar mass = 40.0 g / 78.08 g/mol = 0.512 mol
Since the calcium fluoride contains 7.70 g of calcium, we can determine the moles of calcium using its molar mass (40.08 g/mol):
Moles of calcium = Mass of calcium / Molar mass of calcium = 7.70 g / 40.08 g/mol = 0.192 mol
Therefore, 40.0 g of calcium fluoride contains 0.192 mol of calcium.
Learn more about Calcium fluoride here:https://brainly.com/question/28947194
#SPJ3
How many grams of potassium chloride are produced from 5 mol of potassium and excess chlorine?
Answer: 372.5 g KCl
Explanation: balanced equation
2K + Cl2-------> 2KCl
2 mol K produce 2 mol Kcl
5 mol K produce = 5x2/2=5 mol Kcl
Then moles = mass/molar mass
Mass = moles x molar mass= 74.5x5=372.5 g Kcl
The main difference between aerobic respiration and anaerobic respiration is that A. anaerobic respiration requires oxygen, and aerobic respiration does not. B. anaerobic respiration generates ATP, and aerobic respiration does not. C. aerobic respiration requires oxygen, and anaerobic respiration does not. D. aerobic respiration generates ATP, and anaerobic respiration does not.
Answer:
the anwser is c
Explanation:
aerobic = air
anerobic= does not
Answer: Option (C) is the correct answer.
Explanation:
In a cell, when glucose breaks down by the use of oxygen and yields carbon dioxide, water along with release of energy is known as aerobic respiration.
For example, in the mitochondria aerobic respiration takes place.
On the other hand, in a cell when glucose breaks down without the use of oxygen then it yields alcohol, carbon dioxide along with release of energy is known as anaerobic respiration.
For example, yeasts respire anaerobically.
Therefore, we can conclude that the main difference between aerobic respiration and anaerobic respiration is that aerobic respiration requires oxygen, and anaerobic respiration does not.
The reactant side of a balanced chemical equation is shown below.
PCl5 + 4H2O →
How many hydrogen atoms should there be on the product side in the equation?
8
6
4
2
Answer: There are 8 hydrogen atoms on the product side in the reaction.
Explanation:
Every balanced chemical equation follows law of conservation of mass.
This law states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form. This law also states that total number of individual atoms on the reactant side must be equal to the total number of individual atoms on the product side.
For the given reaction, the balance chemical equation follows:
[tex]PCl_5+4H_2O\rightarrow H_3PO_4+5HCl[/tex]
On reactant side:
Number of Phosphorus atoms = 1
Number of Chlorine atoms = 5
Number of Hydrogen atoms = 8
Number of Oxygen atoms = 4
On Product side:
Number of Phosphorus atoms = 1
Number of Chlorine atoms = 5
Number of Hydrogen atoms = 8
Number of Oxygen atoms = 4
Hence, there are 8 hydrogen atoms on the product side in the reaction.
Answer: The correct option is 8 hydrogen atoms
Explanation:
I did the test and got it right
What is peroxide (H2O2) oxidized to during redox reactions?
Answer:
H2O2 - - - - - -> H2O + O2
+1 +2 0
Oxidation O. S.
state of of Oxygen
Oxygen
[tex]2H_{2}O_{2}[/tex]---------> [tex]2H_{2}O+O_{2}[/tex] is the equation given for the oxidation of peroxide during a redox reaction.
What is a redox reaction?The reaction in which both oxidation and reduction can simultaneously occur to give raise to product is called as redox reaction.
The term redox is from 2 different words namely reduction and oxidation.Oxidation means the loss of electrons or increase in the oxidation state, reduction means the gain of electrons and decrease in the oxidation state.Redox reactions generally involve the transfer of electrons.To learn more about redox reactions, refer:
https://brainly.com/question/13293425
#SPJ2
How much o2 reacts completely with 4.0 moles of ch3oh in the reaction 2 ch3oh + 3 o2 → 2 co2 + 4 h2o ?
Answer:
= 6.0 moles
Explanation:
The equation for the reaction is;
2 CH3OH + 3 O2 → 2 CO2 + 4 H2O
We are given 4.0 moles of CH3OH.
From the reaction; 2 moles of CH3OH requires 3 moles of O2,
Therefore; moles of Oxygen will be;
= 4.0 moles × 3/2
= 6.0 moles
Therefore; 6.0 moles of Oxygen gas are required to react completely with 4.0 moles CH3OH.
if the solubility of a gas in water is 4.0g/l when pressure of the gas above the water is 3.0 atm what is the pressure of the gas above the water when the solubility of the gas is 1.0g/l
Answer:0.75 atm
Explanation: 0.75 atm is the pressure if the gas
Dr. Martin is an ophiologist, or a scientist who studies snakes. During one experiment, Dr. Martin fed a snake a whole mouse and compared the mass of the snake before it consumed the mouse to the snake's mass immediately after it was fed. According to the law of conservation of mass, how should the masses compare?
A. The mass of the snake after feeding should be the same as the original mass of the snake.
B. The mass of the snake after feeding should be equal to the mass of the mouse. C. The mass of the snake after feeding should be equal to the original mass of the snake minus the mass of the mouse.
D. The mass of the snake after feeding should be equal to the original mass of the snake plus the mass of the mouse.
D) mass of snake after feeding is equal to orginal mass of snake plus mouse since the mass is conserved
The law of conservation for the feeding of mice by snake by Dr. Martin states the mass of snake after feeding being equivalent to the mass of snake before plus the mass of mice. Hence, option D is correct.
What is the law of conservation?The law of conservation is given as the state in which the quantity can neither be created nor be destroyed.
The mass as the physical quantity in the chemical reaction founds to be conserved and not lost.
Thus, for the consumption of the mice by the snake according to the law of conservation stated by Dr. Martin, that the mass of snake after feeding mice will be the sum of the mass of snake before and the mass of mice. Thus, option D is correct.
Learn more about law of conservation, here:
https://brainly.com/question/20635180
#SPJ2
The ksp for cobalt (ii) phosphate (mm = 366.73 g/mol) is 2.05 * 10-35. what is the solubility of this salt (ng/l) in a 0.029 m sodium phosphate solution?
Answer:
[tex]\boxed{\text{3.54 ng/L}}[/tex]
Explanation:
At equilibrium we have
[tex]\begin{array}{cccccc} &\text{Co}_{3}\text{(PO}_{4})_{2} & \rightleftharpoons &3\text{Co}^{2+}&+ & 2\text{PO}_{4}^{3-}\\\text{I:}& & & 0 & & 0.029\\\text{C:}& & & +3s & & 0.029 + 2s \\\text{E:}& & & 3s & &0.029+2s\\\end{array}[/tex]
[tex]K_{sp} = [\text{Co}^{2+}]^{3}[\text{PO}_{4}^{3-}]^{2}= 2.05\times10^{-35}\\\\(3s)^{3}\times (0.029 + 2s)^{2} = 2.05\times10^{-35}[/tex]
Assume that s ≪ 0.029. Then
[tex]27s^{3}\times (0.029)^{2} = 2.05\times10^{-35}\\\\2.27 \times 10^{-2}s^{3} = 2.05\times10^{-35}\\\\s^{3}= 9.028\times10^{-34}\\\\s = \sqrt[3]{9.028\times10^{-34}}= 9.665\times10^{-12}[/tex]
[tex]s = \dfrac{9.665\times10^{-12}\text{ mol}}{\text{1 L}}\times \dfrac{ \text{366.73 g} }{\text{1 mol}}\\\\ = 3.54\times 10^{-9} \text{g/L} = \text{ 3.54 ng/L}[/tex]
The solubility of cobalt(II) phosphate is [tex]\boxed{\textbf {3.54 ng/L}}[/tex].
What effect does super critical mass have on a nuclear reaction The reaction rate increases b The reaction produces less energy c The reaction involves increased fusion dThe reaction produces fewer neutrons
Answer:
It's a.
Explanation:
The reaction will proceed at an increasing rate.
The effect that does super critical mass have on a nuclear reaction, the reaction to have on a nuclear reaction, the reaction rate increases. The correct option is a.
What are nuclear reaction?Nuclear reaction is the reaction in which two nuclei are combined to form nuclides or one nuclei combine with a subatomic particle to form nuclides.
There are four types of nuclear reaction, fission, fusion, decay and transmutation.
Thus, the correct option is a, the reaction rate increases.
Learn more about nuclear reaction
https://brainly.com/question/12649087
#SPJ2
Do all titrations of a strong base with a strong acid have the same ph at the equivalence point?
Answer:
Yes, all titrations of a strong base with a strong acid have the same pH at the equivalence point.This pH is 7.
Explanation:
Strong acids and strong bases ionize completely in aqueous solutions. The ionization of strong acids produce hydronium ions, H₃O⁺, and the ionization of strong bases produce hydroxide ions, OH⁻.
Since the ionization of strong acids and bases progress until completion, there is not reverse reaction.
The definition of pH is pH = - log [H₃O⁺]. Acids have low pH (below 7, and greater than 0) and bases have high pH (above 7 and less than 14). Neutral solutions have pH = 7.
Acid-base titrations are a method to determine the concentration of an acid from the known concentration of a base, or the concentraion of a base from the known concentration of an acid.
The equivalence point of the titration is the point at which the the number of moles of hydronium ions and hydroxide ions are equal.
Then, at that point, the hydronium and hydroxide ions will be in the stoichiometric proportion to form a neutral solution, i.e. the pH of the solution wiill be 7.
Not all titrations of a strong base with a strong acid have the same pH at the equivalence point. The pH value will be different when a weak acid is titrated with a strong base due to the presence of the weak conjugate base in the reaction mixture.
Explanation:No, not all titrations of a strong base with a strong acid have the same pH at the equivalence point. For instance, the titration of 25.00 mL of 0.100 M HCl (a strong acid) with 0.100 M NaOH (a strong base) has a pH of 7.00 at the equivalence point. However, when a weak acid, such as acetic acid, is titrated with a strong base like NaOH, the pH at the equivalence point is 8.72, because the reaction mixture contains a weak conjugate base (acetate ion). The pH value at the equivalence point is dependent on whether the acid is strong or weak, and the presence of its conjugate base.
Learn more about Titration here:https://brainly.com/question/38139486
#SPJ12
Which of the following statements supports the one gene-one enzyme hypothesis?A) A mutation in a single gene can result in a defective protein.B) Alkaptonuria results when individuals lack multiple enzymes involved in the catalysis of homogentisic acid.C) Sickle-cell anemia results in normal hemoglobin.D) Multiple antibody genes can code for different related proteins, depending on the splicing that takes place post-transcriptionally.
Answer: its A
Explanation:
Answer: Option A
Explanation:
One gene one enzyme hypothesis was proposed by George Wells Beadle in which he stated that one gene directly affects the production of the single enzyme.
This consequently affects the individual step in the whole metabolic pathway.
So, a mutation in the single gene will lead to the production of the faulty protein. The step of the metabolism will be affected in which the faulty enzyme will participate.
Using the information provided in the chart determine which of these would have the highest pOH level? A) urine B) toothpaste C) rainwater D) household ammoni
Answer:
The answer is urine (A)
Explanation:
The strong acid and strong base has high rate constant of dissociation. The rate constant for weak acid and base for the dissociation is low, they do not easily dissociate in water. Therefore, option A is the correct option.
What are acid and base?Acid is a solution which releases H⁺ hydrogen ion when dissolved in water. Base releases hydroxide ion OH⁻ ion when dissolved in water.
pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. Strength of acidic nature is directly proportional to the concentration of hydronium ion.
On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. Temperature affect the pH. At room temperature pH scale is between 0 to 14. 7 is the pH of neutral solution. Urine among all the given option would have the highest pOH level.
Therefore, option A is the correct option.
To know more about acid and bases, here:
https://brainly.com/question/27228111
#SPJ5
6. What is the oxidation number for the atom indicated in the following compounds.
a. S in BaSO4
b. P in PO4-3
c. Cl in HCIO2
Answer:
a. +6;
b. +5;
c. +3.
Explanation:
Start with elements with well-known oxidation states.
The oxidation state on oxygen O in compounds is mostly -2. Common exceptions include:
-1 in peroxides andpositive when oxygen bonds to fluorine.The oxidation state on group 1 metals (Li, Na, K, etc.) in compounds is mostly +1.
The oxidation state on group 2 metals (Be, Mg, Ca, etc.) in compounds is mostly +2.
Barium Ba is a group 2 metal. The oxidation state on Ba in the compound BaSO₄ is expected to be +2.
The oxidation state on hydrogen H in compounds is mostly +1. The oxidation state on H might be negative when it is bonded to metals.
The oxidation state on halogens (F, Cl, Br, etc.) is mostly -1. The oxidation state may vary when the halogen is bonded to oxygen or another halogen element.
Compounds are neutral. The oxidation state on all atoms in a compound shall add up to 0. Both BaSO₄ and HClO₂ are neutral.
BaSO₄Oxidation states:
Ba: +2;The oxidation state on sulfur S is to be determined;O: -2.Let the oxidation state on S be x.
2 + x + 4 × (-2) = 0;
x = 6.
Hence, the oxidation state on S in BaSO₄ is +6.
HClO₂Oxidation states:
H: +1;Cl here is bonded to oxygen. The oxidation state on chlorine Cl is to be determined;O: -2.Let the oxidation state on Cl be x.
Refer to the equation in BaSO₄ as an example. Try setting up the equation on your own.
x = 3.
Hence, the oxidation state on Cl is +3.
PO₄³⁻Ions carry charge. Oxidation states on atoms in an ion shall add up to the charge of the ion. The superscript of an ion shows its charge. The superscript 3- in the phosphate ion shows that the ion carries a charge of -3.
Oxidation states:
The oxidation state on P is to be found;O: -2.Let the oxidation state on P be x.
x + 4 × (-2) = -3;
x = 5.
Hence, the oxidation state on P is +5.
Based on the chemical equation, use the drop down menu to choose the coefficients that will balance the chemical equation:
()O2—> ()O3
The answers would be 3 and 2 so the subscripts would both equal 6.
Answer: [tex]3O_2(g)\rightarrow 2O_3(g)[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical equation for the given reaction will be:
[tex]3O_2(g)\rightarrow 2O_3(g)[/tex]
where the (g) stands for the state of reactants and products which is gaseous.
Which component of an atom would you not expect to find in the nucleus, but might be orbiting around it?
Answer: Electrons orbit the nucleus
Final answer:
In an atom, electrons are not found in the nucleus but in orbitals around it. These orbitals represent regions of high probability for the electron's location, and their shapes are determined by quantum mechanical wave functions.
Explanation:
The component of an atom that you would not expect to find in the nucleus but might be orbiting around it is the electron. Electrons are found in orbitals, which are regions in space surrounding the nucleus where they are likely to be located. Unlike the Bohr model's simple orbits, these areas are defined by mathematical equations from quantum mechanics, reflecting the dual wave-particle nature of electrons.
The structure of an atom includes a central nucleus, composed of protons and neutrons, which houses most of the atom's mass, with electrons distributed in the space surrounding the nucleus.
Pure water at 25°C
ionizes in the presence of acid to form an equilibrium in which
ionizes in the presence of acid to form an equilibrium in which
self-ionizes to form an equilibrium in which
self-ionizes to form an equilibrium system in which
Answer:
The correct answer is option C
Explanation:
Pure water at 25°C self-ionizes to form an equilibrium in which. Option C is correct. This is further explained below.
What is ionization?Generally, ionization is simply defined as any process that turns electrically neutral atoms or molecules into electrically charged ones.
In conclusion, At 25°C, pure water self-ionizes to establish an equilibrium in which
Read more about ionization
https://brainly.com/question/1602374
#SPJ6
How many additional grams of KOH are required to increase the concentration of the solution to 0.500 m? G
Answer: 21.9
Explanation:
I got it right
Which one of the following bonds would you expect to be the most polar? a) B–H b) N–H c) P–H d) Al–H e) C–H
Answer:
Option b) N–H is the bond that you can expect to be the most polar.Explanation:
A polar covalent bond is the result of uneven distribution of the electrons involved in the covalent bond.
The polar character of a covalent bond is determined by the difference in the electronegativities of the atoms bonded.
The higher the electronegativity difference of the two bonded atoms the more polar the covalent bond is.
Then, you need to find and compare the electronegativies of the atoms bonded.
This is the list of electronetativities of every atom in the question:
H: 2.20B: 2.04N: 3.04P: 2.19Al: 1.61C: 2.55Using that list you can do these calculations:
Bond Electronegativity difference
a) B–H 2.20 - 2.04 = 0.16
b) N–H 3.04 - 2.20 = 0.84
c) P–H 2.20 - 2.19 = 0.01
d) Al–H 2.20 - 1.61 = 0.59
e) C–H 2.55 - 2.20 = 0.35
Thus, the greatest electronegativity difference is that of N - H, 0.84, which indicates that this is the most polar bond from the choices.
The most polar bond among the given options is N-H.
Explanation:The most polar bond among the given options is N–H.
The polarity of a bond is determined by the difference in electronegativity between the two atoms involved. Nitrogen (N) has a higher electronegativity compared to the other elements in the choices, and hydrogen (H) has a lower electronegativity. The greater the electronegativity difference, the more polar the bond.
For example, in a N–H bond, nitrogen attracts the shared electrons more strongly than hydrogen, resulting in a partial negative charge on nitrogen and a partial positive charge on hydrogen.
Learn more about polarity of bonds here:https://brainly.com/question/32841252
#SPJ6
Which gas law could be used to solve just about any gas law problem?
Charles Law
Combined gas law
Ideal gas law
Gay-Lussacs Law
The ideal gas law has the power to unravel any enigmatic gas law enigma. The captivating gas law intertwines the connections between pressure, volume, temperature, and the multitude of moles of gas.
It is conveyed through the equation PV = nRT, where P symbolizes pressure, V signifies volume, n represents the count of moles, R stands for the ideal gas constant, and T embodies temperature.
This equation empowers us to compute any of the four variables (pressure, volume, temperature, and number of moles) if we possess knowledge of the other three. It bestows a comprehensive framework for comprehending and prophesying the conduct of gases in diverse circumstances.
The spellbinding gas law can be employed to crack riddles concerning modifications in volume, pressure, or temperature of a gas, as well as enigmas involving the calculation of the number of moles of gas. It is an elemental instrument in the exploration of gases and is extensively applicable in domains such as chemistry, physics, and engineering.
In summary, the ideal gas law is an adaptable equation that encompasses the bonds between pressure, volume, temperature, and the multitude of moles of gas, rendering it the paramount preference for unraveling a vast array of gas law enigmas.
To learn more about Ideal gas law:
https://brainly.com/question/6534096
#SPJ4
Two samples of carbon come into contact. Heat will transfer from Sample A to Sample B if the average kinetic energy of Sample A's atoms is _______ the average kinetic energy of Sample B's atoms.
Answer:
The right word to fill the blank space is GREATER THAN.
Explanation:
In nature, heat in form of temperature is usually transfer from the region of higher temperature to the region of lower temperature. Thus, for heat to be transfer from one substance to another one, the temperature will flow from the body with the higher temperature to that which has a lower temperature, the substance that is giving out the heat must have a higher temperature.
Explanation:
When two substances of different temperature are in contact with each other then heat will flow from hot object to cold object until a thermal equilibrium is maintained between them.
Kinetic energy is the energy obtained due to the motion of an object is known as kinetic energy. Total kinetic energy of all the particles present in a system is known as average kinetic energy.
Thus, we can conclude that when two samples of carbon come into contact. Heat will transfer from Sample A to Sample B if the average kinetic energy of Sample A's atoms is greater than the average kinetic energy of Sample B's atoms.
The calculation of quantities in chemical equations is called
Answer:
The calculation of quantities is chemical equations is called stoichiometry.Explanation:
In a chemical reaction, as a result of the law of conservation of mass, reactants combine in fixed proportions to form the products.
Then, a chemical reaction is characterized by cuantitative relations between the atoms and compounds, which permit to make predictions on how much product can be obtained from certain amounts of reactants or how much of each reactant you would need to obtain a desired amount of product.
Stoichiometry is the use of the mole coefficients of a chemical equation to state ratios and set proportions, and, so, determine the number of moles or masses of reactants and products.
The calculation of quantities in chemical reactions is referred to as stoichiometry. It's about using a balanced chemical equation to figure out the quantitative relationships between the amounts of reactants and products. This process can be used in situations like quantitative chemical analysis.
Explanation:The calculation of quantities in chemical reactions is referred to as stoichiometry. This means using a balanced chemical equation to determine the quantitative relationships between the quantities of reactants and products. In this process, chemical species' coefficients, derived from the balanced chemical equation, are used to provide the relative numbers, allowing a quantitative assessment of the relationships between the substances consumed and produced by the reaction.
Applying stoichiometry becomes particularly essential when dealing with more realistic situations, such as when reactants are not present in stoichiometric amounts. For instance, it is used in quantitative chemical analysis, such as titrations, where the volume of a titrant solution required to fully react with a sample solution is measured. This volume is subsequently used to calculate the concentration of analyte in the sample.
In other words, stoichiometry is the cornerstone of chemical calculations, providing a method to predict yields, determine reaction efficiencies, and understand the fundamental aspects of the reaction's reaction's stoichiometry. Quite simply, stoichiometry is a powerful tool that provides important insights into the world of chemistry.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ6
Is the equation below balanced? Explain your answer. Zn(OH)2 + NaOH → Na2ZnO2 + H2O
Answer:
No, it is not balanced.
The balanced equation is: Zn(OH)₂ + 2NaOH → Na₂ZnO₂ + 2H₂O.
Explanation:
To balance the equation, you should apply the law of conservation of mass for the equations. The law of conservation of mass states that the no. of each atom is equal in both sides (reactants and products). For the given equation: Zn(OH)₂ + NaOH → Na₂ZnO₂ + H₂O.The no. of Na atoms in reactants side is 1 but in products side is 2.
The no. of H atoms in reactants side is 3 but in product side is 2.
So, the equation is not balanced.
The balanced equation is:
Zn(OH)₂ + 2NaOH → Na₂ZnO₂ + 2H₂O.
The no. of all atoms is the same in both of reactants and products side.Zn (1), O (4), H (4), and Na (2).
The modern-day quantum model of the atom is better than john dalton’s model because it
Answer:
The correct answer from the choices, which are included in the comments section, is:
D. Answers many questions about atomsExplanation:
Let's go through every choice from the list:
A. Easier to understand:
Incorrect.
Quantum model is not quite easy to understand. On the contrary, it is complex and quite hard to understand.
John Dalton's model was the first scientific model of the atom. It depicted the atom as indivisible, extremely tiny particles that constitute all matter.
Many facts were discovered later: the atom is not indivisible, there are some subatomic particles (electrons, protons and neutrons), the electrons are not in fixed positions (orbits) that were progresively explained by new models: J.J Thomson's model, Ernest Rutherford's model, Niels Bohr's model, and, the last and current one, the quantum model/
So. it is not easier to understand but more complete.
b. is a more recent theory
Incorrect.
As said, John Dalton's theory was the first scientific theory of the atom. It was developed in the first half of XIX century. It is, definetly, no a more recent theory. Modern-day quantum model is the most recent theory of the atom.
C. Can be represented in two dimensions
Incorrect.
Modern-day quantum model represents the electrons in a 3-D arrangement around the atom's nucleus, like a "cloud" without definite size. Two dimensional representation is not a characteristic that defines how the modern-day quantum model of the atom is better than other models.
D. Answers many questions about atoms
Correct. Indeed, every model of the atom after John Dalton's model explains more facts about the atoms: J.J Thomson's explained that the negative charges are particles inside the atom (electrons); Ernest Rutherford's model explained the existence of the nucleus with protons, while the electrons are surrounding the atom; Bohrs model explained that the electrons cannot decay into the atoms' nuclei, because they can only have certain enery levels; and the modern-day quantum model explains much more facts than any previous one, specially about the behaviour of the subatomic particles.
While working in the chemistry lab, you dissolve 2.5g of sodium hydroxide chips into a beaker containing 50mL of water. As you pick up the beaker to add it to a separate solution, you notice the outside of the beaker is very warm. What explains this rise in temperature?
Answer:
Energy was released when the sodium and hydroxide ions formed new bonds with the water.
Explanation:
Answer:
The lattice enthalpy of sodium hydroxide is less than the sum of hydration enthalpies of hydroxide ions and sodium ions.
Explanation:
Lattice enthalpy is defined as heat energy required to break 1 mole of crystal lattice.
Hydration enthalpy is defined as amount energy released when 1 mole of ions undergo hydration (surrounding of water molecules).It is always negative.
Enthalpy of solution = Lattice enthalpy + hydration enthalpy
If amplitude of lattice enthalpy > hydration enthalpy , enthalpy of solution will positive.Hence, solution will feel cool.If magnitude Lattice enthalpy < hydration enthalpy, enthalpy of solution will negative.Hence solution will feel warm or hot.Reaction between sodium hydroxide and water is an example of an exothermic reaction. During this process sodium hydroxide dissociates into sodium ions and hydroxide ions into the water.
The rise in temperature is due to hydration enthalpy of hydroxide ions and sodium ions is greater than that of the lattice enthalpy of the sodium hydroxide. This is the reason behind the warmth of the sodium hydroxide solution.
A 55.0g sample of iron (III) filings is reacted with 23.8g of powdered sulfur (S8). How much iron (III) sulfide in moles would be produced in this reaction?
Equation:
Convert to moles
of iron:
Convert to moles
of sulfur:
Calculate the
limiting reagent:
Solve the problem:
Answer:
0.744 mol
Explanation:
the balanced equation for the reaction is
8Fe + S₈ ---> 8FeS
molar ratio of Fe to S₈ is 8:1
number of moles of Fe - 55.0 g / 56 g/mol = 0.98 mol
number of moles of S - 23.8 g / 256 g/mol = 0.093 mol
if we are to assume that S₈ is the limiting reactant
if 1 mol of S₈ reacts with 8 mol of Fe
then 0.093 mol of S₈ reacts with - 8 x 0.093 mol = 0.744 mol of Fe
however there's 0.98 mol of Fe present but only 0.744 mol of Fe is needed
therefore Fe is in excess and S₈ is the limiting reagent
molar ratio of S₈ to FeS is 1:8
then 0.093 mol of S₈ reacts with - 8 x 0.093 = 0.744 mol of FeS
number of FeS moles produced is 0.744 mol
Answer:
0.74 moles iron (III) sulfide
Explanation:
From the balanced equation of reaction:
[tex]Fe + S --> FeS[/tex]
1 mole of Fe reacts with 1 mole of S to give 1 mole of FeS.
moles = [tex]\frac{mass}{molar mass}[/tex]
mole of Fe = 55/55.8 = 0.99 moles
mole of S = 23.8/32.07 = 0.74 moles
Sulfur is limited in quantity and will therefore determine the rate of reaction.
1 mole of sulfur gives 1 mole of FeS
0.74 moles of sulfur will therefore give 0.74 moles of FeS.
0.74 moles iron (III) sulfide will be produced.
The atomic number of an element is the total number of which particles in the nucleus?
Number of your protons in an atom
The number of Protons