Each water molecule is joined to _____ other water molecules by ____ bonds.

b. deflects. A DC motor's magnet has a magnetic field that deflects the wire loop's magnetic field, therefore causing the loop to rotate.

When a conductor, through which an electric current passes, is immersed in a magnetic field, it experiences a deflects force according to the Law of Lorentz creating as result that the loop rotate.

A DC motor's magnet has a magnetic field that deflects the wire loop's magnetic field, therefore causing the loop to rotate.

Answer : Option B

Explanation:

It is said that electric field is always associated with the magnetic field and they influence each other. When a wire carrying current is placed near a magnetic compass, the needle present in the compass will deflect showing that there is a magnetic field associated with the set up. Every magnet has a magnetic field associated with it which causes deflection thereby making the loop to rotate.

Answer:

The atmosphere

Explanation:

Answer:

Volcanic lightning is created when a volcano erupts and lots of tiny fine particles of volcanic ash form a cloud. Friction between the particles of ash and the gases emitted from the eruption cause differentces that create lightning. Friction between the particles of ash and the gases emitted from the eruption cause differentces that create lightning. The lightning usually occurs between clouds and from the eruption column to the crater.

Explanation:

please mark brainliest if this helped :)

Answer: how the atomic scale structure of solids explains their large-scale properties

Explanation:

Solid state physics is a branch of physics (specifically condensed matter) that studies solids (rigid or semi-rigid matter), through its atomic description.

Then, it can be said that it studies the properties the solids present when they are gathered in a remarkable number of atoms.

This means, solid state physics fundamentally studies the properties due to the periodic ordering of the atoms in a solid.

Transformers only work with AC.

If you put DC into a transformer, all that comes out is smoke.

(a)

Transformers will not work on direct current in electrical systems.

Answer: Option A

Explanation:

Transformers work only on the alternate current of electrical system. And they are not suitable to work upon with the direct current. As the direct current has the property to transfer high voltage directly and is unable to direct the current with high and low voltages, causes the transformer to burn out the coil leading to burning of the transformer circuit and causing smoked transformers.

The sun produces energy through a process called fusion of hydrogen. This involves hydrogen nuclei fusing into helium nuclei in a series of reactions known as the proton-proton cycle. While nuclear fission can also produce energy, it requires larger, complex nuclei and is not the primary process in stars like the sun.

The process most commonly associated with the energy produced by our sun is B. Fusion of Hydrogen. The sun produces energy through a series of fusion reactions, specifically the proton-proton cycle, where protons or hydrogen nuclei fuse into helium nuclei. This energy production happens primarily at the boundary of the helium core of the sun, where temperature is highest, and sufficient hydrogen remains.

An important note to make is that heavy atomic nuclei can also produce energy when broken up into lighter ones, a process called nuclear fission. However, fission, familiar to us through its use in atomic bombs and nuclear reactors, requires big, complex nuclei, while stars like our sun are composed predominantly of small, simple nuclei, making fusion the primary source of energy for the sun and stars.

https://brainly.com/question/3834826

#SPJ3

Explanation:

An artificial satellite is one that is launched into space to orbit the Earth (or another body of the solar system) for various purposes.

In this sense, the characteristics of an artificial satellite will depend on its purpose and functionality. From there we can list: meteorological satellites (for weather) , telecommunications satellites, remote sensing satellites, global positioning systems satellites, environmental satellites, research satellites, among others.

In addition, their orbits can be classified according to their height and inclination, depending on the use they have.

On the other hand, one of the main conditions for a satellite to be considered as such is that it must be kept orbiting. This means, it must not touch land during its useful life, even if it remains in constant contact with its earth based control stations.

Therefore, a land-based is not a type of satellite.

Answer:

Ronald Regan

Explanation:

Ronald Regan is the president linked to the trickle-down theory of economics.

Answer:

The answer is President Ronald Reagan.

Explanation:

Reaganomics is the term used when refering to the economic policies instituted by former President Ronald Reagan.

Reaganomics was part of the Economic Recovery Tax Act of 1981-Title I: Individual Income Tax Provisions-Subtitle A-Tax Reductions.

The Economic Recovery Tax Act of 1981-Title I: Individual Income Tax Provisions-Subtitle A-Tax Reductions states the following:

"Economic Recovery Tax Act of 1981 - Title I: Individual Income Tax Provisions - Subtitle A - Tax Reductions - Amends the Internal Revenue Code to reduce individual and estate and trust income tax rates for 1982, 1983, 1984 and thereafter."

Hope this helps!!!

Please give me brainliest!!

Have a GREAT day and remember to take care of yourself!

Answer:

The answer that is most accurate would be the first one.

Explanation:

Actually, there are  2.54 centimeters in an inch. Use that as a tool for converting inches to centimeters:  

1 inch x 2.54 = 2.54 centimeters.

2 inches x 2.54 = 5.08 centimeters.

3 inches x 2.54 = 7.62 centimeters.

4 inches ...........

Answer:

Explanation:

Magnetic Confinement Fusion is studied to generate thermonuclear energy through fusion power, using magnetic fields to transform matter into plasma.

On the other hand, Inertial Confinement Fusion is a type of research aimed to produce nuclear fusion reactions through heat and compression of a fuel.

These two researches comprehend the Fusion Energy Research, which is aimed to produce and develop plasma as a energy resource.

The correct options are A). Inertial Confinement and B). Magnetic Confinement.

Magnetic Confinement Fusion, that is studied to generate thermonuclear energy through fusion power, using magnetic fields to transform matter into plasma.

Inertial Confinement Fusion is a type of research that aimed to produce nuclear fusion reactions through heat and compression of a fuel.

These two researches involves the Fusion Energy Research, which is aimed to produce and develop plasma as a energy resource.

Learn more about Magnetic Confinement here:-

https://brainly.com/question/12970728

#SPJ2

Answer: [tex]132cm^{3}[/tex]

Explanation:

The volume [tex]V[/tex] of a solid is given by the multiplication of its three dimensions:

[tex]V=(height)(widgth)(length)[/tex]

In this case we have two similar solids with volumes  [tex]V_{1}=88cm^{3}[/tex] and [tex]V_{2}[/tex], and we only have information about the height of each solid [tex]h_{1}=6cm[/tex] and [tex]h_{2}=9cm[/tex].

Now, there is a theorem for  similar solids, which establishes the ratio of their volume is [tex]\frac{V_{1}}{V_{2}}[/tex] and the ratio of one of their corresponding sides (the height in this case) is [tex]\frac{h_{1}}{h_{2}}[/tex].

Knowing this, we can write the following relation:

[tex]\frac{V_{1}}{V_{2}}=\frac{h_{1}}{h_{2}}[/tex]

Substituting the known values:

[tex]\frac{88cm^{3}}{V_{2}}=\frac{6cm}{9cm}[/tex]

Fially finding [tex]V_{2}[/tex]:

[tex]V_{2}=132cm^{3}[/tex]

Final answer:

The volume of the larger solid is found by cubing the linear dimension ratio (which is 2:3 for the heights of the two solids) and then multiplying by the volume of the smaller solid. This calculation results in a volume of 968 cm³ for the larger solid.

Explanation:

When comparing the volumes of two similar solids, the ratio of their volumes is the cube of the ratio of their corresponding linear dimensions. Since the heights of the two solids are 6 cm and 9 cm, we use the ratio of their heights (6:9) which simplifies to 2:3. The volume of the larger solid is then calculated by cubing the ratio (2:3) and multiplying it by the volume of the smaller solid:[tex]V_{smalller}[/tex]

[tex]V_{larger}[/tex] = (3/2)³ × [tex]V_{smalller}[/tex] = (27/8) × 88 cm³ = 11 × 88 cm³ = 968 cm³.

Therefore, the volume of the larger solid is 968 cm³.

Answer:

Work is equal to the change in kinetic energy.

Explanation:

Since energy cannot be created nor destroyed, and work is a form of energy, the work done by a force acting on an object must be equal to the kinetic energy gained by the object.

This is summarized by the work-energy theorem, which can be written as:

[tex]W=\Delta K = K_f - K_i = \frac{1}{2}mv^2 - \frac{1}{2}mu^2[/tex]

where

W is the work done on the object

m is the mass of the object

v is the final speed of the object

u is the initial speed of the object

Final answer:

The work done by a force on a body is equal to the change in that body's kinetic energy, according to the work-energy theorem.

Explanation:

In a system where only a single force is acting upon a body, the work done by that force is equal to the change in kinetic energy of the body. This is known as the work-energy theorem, which can be mathematically expressed as the total work done on the system being equal to the change in kinetic energy. If the force is in the direction of the motion, the work done on an object increases its kinetic energy. However, if the force is opposite the direction of motion, it does negative work, and the kinetic energy decreases. No other forms of energy, such as potential energy, are taken into account in this particular relationship.

Answer:

C

Explanation:

It has to travel 600 light years before we would be able to observe the explosion.

The star Betelgeuse is about 600 light-years away.

If it explodes tonight, we won't know about it until 600 years from now. (C)

(Maybe it already has.  If it exploded any time after the year 1419, we have no way to know it yet.)

In a simple DC motor, the Armature reverses the current every half revolution of the loop.

Answer : Option C

Explanation:

DC motor works on the principle of electromagnetic induction that when a current carrying conductor placed in a magnetic field is said to exert a mechanical force.

It converts electrical energy into mechanical energy. In dc motor, the armature rotates in clockwise or anti clockwise direction. When the armature rotates the current reverses its direction for every half rotation which then passes on to the commutators, brushes and slip rings.

Answer:

These are called isotopes.

Explanation:

Please mark brainliest and have a great day!

Answer:

A gas behaves more like an 'ideal' gas at a higher temperature and lower pressure.

Explanation:

do to intermolecular forces becomes less significant compared to kinetic energy and the size of the molecules become less significant to the empty space between them.

Gases are most likely to behave ideally at high temperature and low pressure.

Gases tend to operate ideally at low and high temperatures because potential energy is less important than kinetic energy due to intramolecular forces. Also, the size of the molecule is less important in relation to the free space between the molecules.

Gasworks very ideally at high temperatures and low pressures. High temperature means that the molecules move fast and do not stick together. Low pressure means that the molecules are farther apart and have less interaction.

Learn more about pressure here: https://brainly.com/question/26040104

#SPJ2

Explanation:

The first atomic model was the one proposed by Jhon Dalton, according to which it is postulated that:  

"Matter is made up of indivisible, indestructible and extremely small particles called atoms."  

That is, the atom is a solid and indivisible mass.  

However, at the end of 19th century  the physicist J.J. Thomson began experimenting with cathode ray tubes and found out that atoms contain small subatomic particles with a negative charge (later called electrons).

This means the atom was not indivisible as Dalton proposed. So, Thomson developed in 1904 a new atomic model that was called the raisin pudding atomic model.

Therefore:

IS INDIVISIBLE

Previously it was thought that atoms were indivisible, but his experiment exposed electrons to the world, disproving such a theory.

The "transit method" means doing very careful precise measurements as the planet passes in front of its star.  

It's too far away for us to see it directly, but when it "transits" the star, the brightness of the star decreases by a tiny tiny tiny bit, which we can measure.

If we can measure that dip with good enough precision, it tells us how much of the star's photosphere was blocked from our view when the planet temporarily got in the way.  From that, we can estimate the planet's size.

Explanation:

This situation is a good example of the projectile motion or parabolic motion, in which we have two components: x-component and y-component. Being their main equations to find the position as follows:

x-component:

[tex]x=V_{o}cos\theta t[/tex]   (1)

Where:

[tex]V_{o}=54.5m/s[/tex] is the projectile's initial speed

[tex]\theta=35\°[/tex] is the angle

[tex]t=2.80s[/tex] is the time since the projectile is launched until it strikes the target

[tex]x[/tex]  is the final horizontal position of the projectile (the value we want to find)

y-component:

[tex]y=y_{o}+V_{o}sin\theta t-\frac{gt^{2}}{2}[/tex]   (2)

Where:

[tex]y_{o}=0[/tex]  is the initial height of the projectile (we are told it  was launched at ground level)

[tex]y[/tex]  is the final height of the projectile (the value we want to find)

[tex]g=9.8m/s^{2}[/tex]  is the acceleration due gravity

Having this clear, let's begin with x (1):

[tex]x=(54.5m/s)cos(35\°)(2.8s)[/tex]   (3)

[tex]x=125m[/tex]   (4)  This is the horizontal final position of the projectile

For y (2):

[tex]y=0+(54.5m/s)sin(35\°)(2.8s)-\frac{(9.8m/s^{2})(2.8s)^{2}}{2}[/tex]   (5)

[tex]y=48.308m[/tex]   (6)  This is the vertical final position of the projectile

The x and y distances of projectile from the launching point to the landing point is 125  meters and 48.308 meters respectively.

Projectile motion is the motion of the body, when it is thrown in the air taking the action of gravity on it.

For the distance traveled by the object in a projectile motion, we use the following formula.

[tex]y=u_o+\dfrac{1}{2}gt^2[/tex]

Here, (g) is the gravity, ([tex]u_o[/tex]) is the initial velocity and (t) is time. The

In the given problem, projectile is launched at ground level with an initial speed of 54.5 m/s.

The initial angle of launching the projectile is 35.0° above the horizontal. The time taken to hit the target after the projectile launched is 2.80 seconds.

The x distance of the projectile is the distance traveled by the object in the horizontal direction. Thus the velocity of the projectile is,

[tex]v_x=54.5\cos (35^o)[/tex]

The x distance is the product of horizontal component of the velocity to the time taken by it. Therefore

[tex]x=54.5\cos(35)(2.8)\\x=125\rm m[/tex]

The y distance of the projectile is the distance traveled by the object in the vertical direction. Thus the initial velocity of the projectile is,

[tex]u_o=54.5\cos (35^o)[/tex]

Put this in the above formula  for the y distance, we get,

[tex]y=54.5\sin(35)+\dfrac{1}{2}(-9.81)(2.8)^2\\y=48.308\rm m[/tex]

Hence, the x and y distances of projectile from the launching point to the landing point is 125  meters and 48.308 meters respectively.

Learn more about the projectile motion here;

https://brainly.com/question/24216590

(a) 11500 W

The power required for the car's engine is given by

P = Fv

where

F is the force that the engine must apply

v = 23 m/s is the velocity of the car

In this situation,the car is moving at constant velocity: this means that its acceleration is zero, so the net force on the car must be zero. Since there is a drag force of 500 N against the motion of the car, this means that the force applied by the engine in the forward direction must also be 500 N:

F = 500 N

So the power erogated by the engine is

P = (500 N)(23 m/s)= 11500 W

(b) 17084 W

In this situation, there is not only the drag force opposing the motion of the car, but also the component of the weight which is parallel to the incline.

This component is given by

[tex]W_p = mg sin \theta[/tex]

where

m = 710 kg is the mass

g = 9.8 m/s^2 is the acceleration of gravity

[tex]\theta=2^{\circ}[/tex] is the slope of the incline

Substituting,

[tex]W_p = (710 kg)(9.8 m/s^2)sin 2^{\circ} =242.8 N[/tex]

So now the total backward force against the motion of the car is the sum of the drag force (500 N) and this force:

F = 500 N + 242.8 N = 742.8 N

And so the force applied by the engine must be the same; so the power erogated will be

P = (742.8 N)(23 m/s)= 17,084 W

To maintain its speed, the car's engine needs to provide power to overcome opposing forces. On level ground, the power needed is 11.5 kW, which is used to overcome the drag force. On a slope of 2°, the power needed is 17.23 kW, used to overcome both the drag force and the additional force due to the uphill angle.

To calculate the power required to maintain the car's constant speed, we need to use the formula for power, which is Power (P) = Force (F) x Velocity (v). In this scenario, the force is the drag force namely the air resistance opposing the car's motion.

(a) On level ground, the power required would be P = F x v = 500 N x 23 m/s = 11,500 W or 11.5 kW. So, the car's engine needs to provide a power of 11.5 kW to maintain its speed on level ground.

(b) When the car is driving uphill, the engine needs to work against the gravitational force as well. The additional force due to the uphill slope can be calculated using F = m x g x sin(θ), where m is the car's mass, g is the acceleration due to gravity, and θ is the slope angle.

Applying the values, F = 710 kg x 9.8 m/s² x sin(2°) = 249.2 N. Thus, the total force the engine needs to overcome is 500 N (drag) + 249.2 N (gravity) = 749.2 N. Using the power formula, P = F x v = 749.2 N x 23 m/s = 17,231.6 W or 17.23 kW. Therefore, the car's engine needs to provide a power of 17.23 kW to drive up a 2° hill.

https://brainly.com/question/33381197

#SPJ3

Answer:

at either point of the magnet

Explanation:

its equally strong at the north pole when compared with the south pole.

Hello There!

A magnet has two poles called the north pole and the south pole. The magnetic field is always strongest at the poles of the magnet.

The electric potential remains the same, while the electric potential energy of the ion is twice that of a single electron, because potential energy is proportional to the charge of the ion.

When a neutral atom gains two electrons at a negative terminal, it becomes a negative ion with a charge of -2e. The electric potential at a point is defined as the electric potential energy (EPE) per unit charge at that point. Since potential energy is related to the force and distance between charges, it is useful to refer to the formula for the Coulomb energy of two particles having opposite elementary charges Epot=-e2/(4πε0r). In this case, when the charge of an ion becomes -2e, the electric potential at the position of the ion remains the same, because it is dependent on the electric field and the distance from the charge, not on the amount of charge on the ion itself.

However, the electric potential energy is proportional to the amount of charge on the ion. Therefore, if a single electron has a certain potential energy, a negative ion with a charge of -2e will have twice that potential energy. Hence, the correct statement is that the electric potential remains the same, while the electric potential energy is twice as much as that of a single electron.

The mass ratio of the oxygen ion to the electron is irrelevant to this question, as it does not factor into the calculations of electric potential and electric potential energy in this context.

Undoubtedly because they lack the education, experience, subject knowledge, or raw brain cells to comprehend the evidence on which the theory rests.  OR they just haven't taken the time to READ the evidence yet.

It's the same thing that you find in the areas of the shape of the Earth, or the existence and causes of climate change.  It's always the people with the least to say who are doing the most, loudest talking.

Here's an example:  I'm writing this in early June, 2019.  There's a group of these people who, when Climate Change comes up for discussion and action,  beg themselves out of the discussion, saying "I'm not a scientist.".  But only a short time later, when it comes to debate and legislation on abortion rights, those are the SAME people who suddenly claim to possess the knowledge and informed judgement of competent gynecologists.    

Answer:

B. They are inversely proportional to the square of the distance.

Explanation:

The gravitational force between two objects is given by:

[tex]F_G = G \frac{m_1 m_2}{r^2}[/tex]

where

G is the gravitational constant

m1, m2 are the masses of the two objects

r is the distance between the two objects

While the electrical force is given by

[tex]F_E = k \frac{q_1 q_2}{r^2}[/tex]

where

k is the Coulomb's constant

q1, q2 are the charges of the two objects

r is the distance between the two objects

As we see from the two equations, both forces are inversely proportional to the square of the distance, so the correct option is

B. They are inversely proportional to the square of the distance.

Answer:

b

Explanation:

Both the electrical force and the gravitational force between two objects share which relationship?

They are directly proportional to mass.

They are inversely proportional to the square of the distance.

They are inversely proportional to charge.

They are directly proportional to the square of the distance.

Answer:

B

Explanation:

Let's say Da is the distance Al drives and Db is the distance Ben drives.  And let's say that t is the amount of time that Al drives.

Using the distance equation, we can say:

Da = 40t

Db = 20(t + 3)

We know that Da + Db = 240, so:

240 = 40t + 20(t + 3)

240 = 40t + 20t + 60

180 = 60t

t = 3

So Al had been driving for 3 hours when the dispatcher retrieved the data.  Al started driving at 11 AM, so the dispatcher must have retrieved the data at 2 PM.

Answer: violet!

Explanation:

Answer:

c. The book has potential energy and the bike has kinetic energy.

Explanation:

Answer:

C (third one down).

Explanation:

Always take a look at the formulas.

KE = 1/2 mv^2

PE = mgh

What the KE formula is telling you is that there is motion (v). Only one of the two objects is moving -- the bike.

The PE formula has a weight that (if it is helped) is capable of falling a distance h. The book has a PE value.

The answer is C

Answer:

4. The voltage is reduced by a factor of 2

Explanation:

The relationship between voltage, current and resistance in a circuit is given by Ohm's law:

V = RI

where

V is the voltage

R is the resistance

I is the current

In this problem,

the resistance in the circuit is halved: R' = R/2

the current is constant : I' = I

So the new voltage is

[tex]V' = I' R' = I (\frac{R}{2})=\frac{1}{2} (IR) = \frac{V}{2}[/tex]

so the voltage is reduced by a factor 2.