Answer:
Duncan Solutions, a growing electronics firm, has recently installed an automatic service to respond to customer queries that can be resolved with minimal troubleshooting information. This system, which uses interactive voice response, has enabled them to significantly reduce the number of customer support employees they require. This reduced manpower requirement depicts the role of technology as an external factor that impacts forecasting in the company.
Explanation:
In recent times, there are so many giant strides that has been recorded in technology which has made life easier for everyone and also helps to reduce human power. From the analogy above, it is understood that the technology developed has helped to reduce the number of people that would have been employed to respond to customer also it has increase efficiency which is part of the advantages of technology as it aids efficiency and efficacy.
A problem with the utilitarian principle of ethical decision making is that:_______.
a. it focuses on the consequences of our actions, not on how we achieve those consequences.
b. there is no agreement on what activities are the greatest benefits to the affected.
c. it is difficult to predict the "trickle down" benefits to the least well off in society.
d. it is almost impossible to evaluate the benefits or costs of many decisions.
e. it chooses the option that provides the minimum acceptable degree of satisfaction to those affected.
Answer:
Option D
Explanation:
The Utilitarian Strategy analyses an intervention in consideration of its effects or results; that is, the net advantages and expenses to all different participants.
It aims to accomplish the maximum good for the greatest amount while producing the least amount of suffering or preventing the most suffering.
In a business setting, this method may focus on a statistical methods of likely results, a traditional cost / benefit calculation, or evaluation of the potential usefulness of a result for different group participants.
The utilitarian principle of ethical decision-making has several problems. It focuses on outcomes over processes, has varying interpretations of the 'greatest good', faces challenges in predicting outcomes, struggles in evaluating benefits or costs of decisions, and aims for maximum rather than minimum satisfaction.
Explanation:The utilitarian principle of ethical decision-making is associated with several problems, including these options. Option a: The principle largely focuses on outcomes rather than the means of achieving them, potentially neglecting ethical concerns in the process. Option b: Utilitarianism seeks to create the greatest good for the greatest number, but what constitutes this 'greatest good' can vary widely, leading to disagreement. Option c: It is indeed challenging to predict the broader implications of decisions, particularly their impact on the least well-off in society. Option d: Evaluating the benefits or costs of many decisions can be incredibly complex and almost impossible under the utilitarian principle. Option e: The utilitarian principle does not aim to provide the minimum acceptable degree of satisfaction, but rather seeks the maximum overall benefit.
Learn more about Utilitarian Principle here:https://brainly.com/question/33570873
#SPJ3
After using her Chevy Citation for 17 years, Tracey's mechanic told her that it would cost more to fix the transmission than what the car was worth. She decided it was time for a new car. In which stage of the buying process is Tracey involved?
A. Product selection
B. Need recognition
C. Information search
D. Product examination
E. Product purchase
Answer is B. Tracey is involved in the Need recognition
Explanation: The need recognition is the very first step a consumer takes in the consumer buying journey. It has to do with realising and admitting that there's a need to be met or fulfilled. This is not just a want or wish, but the fact that she recognises the importance of a particularly thing to satisfy her unmet need and decided to acquire it.
If she doesn't recognise and admit that need to acquire a new car, the buying process will hardly progress since she's yet to be motivated to acquire a new car.
I hope this helps you?
Final answer:
Tracey is in the need recognition stage of the buying process after her mechanic advised her that the cost to fix her car exceeds its value.
Explanation:
Given that Tracey's mechanic has informed her that the cost to fix her Chevy Citation's transmission exceeds the value of the car, and she has decided to get a new car, Tracey is in the need recognition stage of the buying process. This is the first step where she acknowledges the necessity for a product—in this case, a replacement vehicle. The subsequent steps of the buying process would involve determining her decision criteria, gathering information, evaluating alternatives based on those criteria, and making the purchase decision, but at this moment, she is at the stage of recognizing the need for a new car.
Manufacturing overhead is _______________if actual manufacturing overhead costs for a period are greater than the amount of manufacturing overhead cost that was applied to Work in Process.
Answer:
overapplied
Explanation:
When we say that manufacturing costs were overapplied, it means that at the beginning of the production process the estimated costs were too high. In other words, the budget considered that it would cost more money to produce the goods.
In this case, overhead costs tend to be overestimated and then overapplied because they rely on past data and efficiency can improve, which lowers costs; or the total production output can be lower than estimated, therefore the company incurred in less costs.
Depending on the cause of the actual lower costs it can be good or bad. If the costs were lower due to improved efficiency, then it is very good. But if the costs were lower due to a lower output, then that is not good.
Manufacturing overhead is overapplied when actual costs exceed the applied costs. This could arise from production inefficiencies or unexpected costs. The difference must be addressed for proper financial accounting.
Explanation:In the realm of managerial accounting, the term Manufacturing Overhead refers to all the indirect factory-related costs that are incurred when manufacturing a product. When the actual manufacturing overhead costs for a period are greater than the amount of manufacturing overhead cost that was applied to Work in Process, we say that the manufacturing overhead is overapplied.
This situation may arise when there is an inefficiency in production, or unexpected costs, such as unplanned machine maintenance or increased factory labor wages.
To correct this, the difference must be added back to the cost of goods sold, or distributed across remaining inventory accounts depending on the policy of the company.
Learn more about Manufacturing Overhead here:https://brainly.com/question/32717570
#SPJ6
Jacobs Company has inventory of 15 units at a cost of $12 each on June 1. On June 5, Jacobs purchased 10 units at $13 per unit. On June 12, it purchased 20 units at $14 per unit. On June 17, it sold 30 units. Using FIFO, what is the value of the inventory at June 17 after the sale? $140 $160 $210 $380
Answer:
$210
Explanation:
Date Description Units Price Total Balance
1-Jun Opening 15 $12 $180 $180
5-Jun Purchase 10 $13 $130 $310
12-Jun Purchase 20 $14 $280 $590
17-Jun *Sale -30 -$380 $210
*Working
Sale
Date Units Price Total
17-Jun -15 $12 $(180)
-10 $13 $(130)
-5 $14 $(70)
Total Sale -30 -$380
So, the correct answer is $210.
When solving systems of equations we have at least two unknowns. A common example of a system of equations is a price problem. For example, Jacob has 60 coins consisting of quarters and dimes. The coins combined value is $9.45. Find out how many of each (quarters and dimes) Jacob has. What do the unknowns in this system represent and what are the two equations that that need to be solved? Finally, solve the system of equations.
Answer:
a. The unknowns in the equation above are q and d that represent the number of quarters and dimes respectively.
b. The two equations that need to be solved are; q+d=60...equation 1, and
0.25 q+0.1 d=9.45...equation 2
c.
Number of dimes, d=37
Number of quarters, q=23
Explanation:
a.
Step 1: Derive equation for determining total number of coins.
The total number of coins can be derived using the expression below;
T=q+d
where;
T=total number of coins
q=number of quarters
d=number of dimes
In our case;
T=60 coins
q=unknown
d=unknown
replacing;
q+d=60...equation 1
The unknowns in the equation above are q and d that represent the number of quarters and dimes respectively.
b.
Step 2: Derive equation for determining combined value of coins.
V=(q×Q)+(d×D)
where;
V=total value of the coins
q=number of quarters
Q=unit value of a quarter in dollars
d=number of dimes
D=unit value of a dime in dollars
In our case;
V=$9.45
q=unknown
Q=$0.25
d=unknown
D=$0.10
replacing;
9.45=(0.25×q)+(0.10×d)
9.45=0.25 q+0.1 d
0.25 q+0.1 d=9.45...equation 2
Step 3: Combine equation 1 and 2 and solve simultaneously
(q+d=60)×0.25 >>>>>>>>>>>> 0.25 q+0.25 d=15
-
(0.25 q+0.1 d=9.45)×1>>>>>>> 0.25 q+0.1 d=9.45
(0.25 q-0.25 q)+(0.25 d-0.1 d)=15-9.45
0 q+0.15 d=5.55
0.15 d=5.55
d=5.55/0.15=37
d=37
Substitute the value of d in equation 1;
q+d=60
and q=37
37+q=60
q=60-37=23
q=23
Suppose the price elasticity of supply for minivans is 0.3 in the short run and 1.2 in the long run. If an increase in the demand for minivans causes the price of minivans to increase by 5%, then the quantity supplied of minivans will increase by about
a. 1.5% in the short run and 6% in the long run.
b. 16.7% in the short run and 4.2% in the long run.
c. 6% in the short run and 1.5% in the long run.
d. 4.2% in the short run and 16.7% in the long run.
Answer:
a. 1.5% in the short run and 6% in the long run
Explanation:
Price Elasticity of supply = percentage change in quantity supplied / percentage change in price
In the short run, the percentage change in quantity supplied = 0.3 = the percentage change in quantity supplied / 5% = 1.5%
In the long run : 1.2 = the percentage change in quantity supplied / 5% = 6%
I hope my answer helps you
Pare, Inc. purchased 10% of Tot Co.'s 100,000 outstanding shares of common stock on January 2, Year 1, for $50,000. On December 31, Year 1, Pare purchased an additional 20,000 shares of Tot for $150,000. There was no goodwill as a result of either acquisition, and Tot had not issued any additional stock during Year 1. Tot reported earnings of $300,000 for Year 1. What amount should Pare report in its December 31, Year 1, Balance Sheet as investment in Tot?A. $170,000B. $200,000C. $230,000D. $290,000
Answer:
B. $200,000
Explanation:
The amount of Tot's shares held by Pare are not enough to justify equity (below 20%) method so it will only adjust the amount for changes in the fair value not when net income and cash dividends are know or declared.
$ 50,000 first purchase
$ 150,000 second purchase
$ 200,000 total investment
___________An example of a campaign that uses integrated brand promotion is Taco Bell; they have simultaneously put out a commercial during the Super Bowl, print advertising, in-store promotions, and a hashtag that was all focused on a new product.
Answer:
Integrated marketing is an example of a campaign that uses integrated brand promotion is Taco Bell; they have simultaneously put out a commercial during the Super Bowl, print advertising, in-store promotions, and a hashtag that was all focused on a new product.
Explanation:
Marketing can be defined as all the strategies and activities put in place by a company to increase a company's product awareness. Once more potential customers know more about the product, they can then make a decision to either purchase or not. Marketing has been known to increase sales depending on how effective the marketing strategy is. Successful marketing strategies usually convert potential consumers to loyal customers thus increasing a product's market share.There are different types of campaigns that can be utilized to ensure that the target audience is sufficiently reached. Any company that wishes to improve the sale of it's products has to consider marketing strategies carefully. An example of marketing campaigns that is often considered is; integrated marketing.
Integrated marketing is a form of marketing that enables a unified experience for the customers to interact effectively with the products. It involves the use of various marketing vehicles that aim at improving a products awareness on many levels at the same time. In our case, Taco bell wanted to achieve three major marketing goals, namely; to put the brand on a national spotlight, build anticipation for a new product and also to encourage purchasing.
The Men's Wearhouse stocks over 350 different styles and colors of ties. This group of ties can be referred to as the store's _________.
a) breadth of variety
b) consignment merchandise
c) depth of assortment
d) closeouts
e) power perimeter
Answer:
c) depth of assortment
Explanation:
The Men's Wearhouse stocks over 350 different styles and colors of ties. This group of ties can be referred to as the store's depth of assortment.
Depth of assortment is the number of varieties and styles within the product line. Today retail industry uses this strategy to increase sales and to convince a customer to buy, instead of buying from other stores.
Assortment strategy basically has two concepts:
Depth of assortment: It is the number of styles and variety of the same line of product or of a particular style.
Width of assortment: It is the number of product lines in the store or in the company.
When the Sherman Antitrust Act banned businesses from "restraining trade," Samuel Dodd came up with the ______, a corporation of corporations that had the power to hold shares of other companies.
Answer:
Holding company.
Explanation:
A holding company normally does not have operations of its own but owns the share of other companies. They form corporate groups, so are referred to as corporate of corporates.
Holding companies work to reduce the risk of the companies they own shares in. For example the shares they hold are protected from the operations of the company, so in times of crisis there is a pool of funds the business can fall back on.
Samuel Dodd came up with the concept of a trust, a corporation that held shares of other companies, in response to the Sherman Antitrust Act that banned businesses from restraining trade. Trusts controlled large portions of the market and often monopolized specific industries.
Explanation:When the Sherman Antitrust Act banned businesses from 'restraining trade,' Samuel Dodd came up with the concept of a trust. The 'trust' was a corporation of corporations that had the power to hold shares of other companies. Basically, a trust was used to control a large portion of the market, often by monopolizing a specific industry. For instance, Rockefeller's Standard Oil Trust controlled most of the petroleum industry. However, this was later deemed illegal as it violated the terms of the Sherman Antitrust Act, which aimed to protect consumers from abusive business practices and ensure fair competition.
Learn more about Trusts here:https://brainly.com/question/33840232
#SPJ3
How does the ranking of spending by larger nations compare depending on which method is used to convert into a common currency?
Answer:
There are two basic ways of comparing spending between different countries:
By using the official exchange rate and their nominal value. Since the US dollar is the most "powerful" currency in the world, local currencies are exchanged to US dollars, then spending is measured in nominal US dollar values. Purchasing power party uses the US dollar as the base currency for the world and then compensates for changes in the exchange rates. This is usually more accurate since it compensates the fact that less developed nations are cheaper than rich developed countries. For example, a house in Switzerland is worth much more than a similar house in Mexico, therefore, the PPP compensates for this differences.Shawn works for Vance Steel Corporation. Shawn's duties include managing the overall processes for the company and transforming the steel resources into goods. Which department would Shawn most likely work in?
A. CIO.
B. Marketing.
C. Accounting.
D. Operations management.
Answer:
D. Operation management department / Operations department
Explanation:
The operations department is the department responsible for overseeing the production process of the department.
The operations department in a firm overlooks the production process. They must:
• Use the resources in a cost-effective and efficient manner
• Manage inventory effectively
• Produce the required output to meet customer demands
• Meet the quality standards expected by customers
Therefore Shawn's function of managing the overall processes for the company and transforming steel resources into goods shows that he most likely work in the operation department and serves as the operations manager
The managers of a popular software firm believe in trusting their subordinates to perform effectively rather than monitoring them closely and imposing rules on them. This company most likely follows _____.
Answer:
Decentralized control
Explanation:
Decentralized control -
It refers to the method adapted by the organisation or company , in which the lower level elements helps completely to attain certain goal or task , is referred to as decentralization control
In this case , the people in the higher post need not rule over the lower one to complete the project or task on time .
The company using this method is happy as the employees are hardworking and there is least number of arguments , and hence becomes successful in shorter run .
Hence , from the question ,
The correct term is decentralization control .
Jackson High School formed several teams to plan and execute the 150th anniversary celebrations of the school. Over a period of two months, the teams organized events, oversaw logistics and coordinated student activities. The events that were planned were on a large scale and required a lot of input from the teachers and students. This is an example of a(n) _________ team.A. project
B. management
C. work
D. action
E. parallel
Answer:
project team
Explanation:
The members belong to different groups (teacher and students)
They have difference functions and and they were dividend into sub-temas (one for each event)
And specially, after the celebration of the 150th annyversary ended the team are disbanded as the project is complete.
The student and teachers worker together for the goal of the 150th anniversary party.
Robert plans to invest $650 in a savings account at the beginning of each of the next seven years. If his opportunity cost rate is 5 percent compounded annually, how much will his investment be worth at the end of seven years?
Answer:
Amount after 7 years will be equal to $914.615
Explanation:
We have given initial investment P = $650
It is given it is compounded annually with rate 5%
So rate of interest r = 5%
Time period is given n = 7 years
We have to find the amount after 7 years
Future value is given by [tex]A=P(1+\frac{r}{100})^n[/tex], here A is future value P is initial investment r is rate of interest and n is time period
So [tex]A=650(1+\frac{5}{100})^7[/tex]
[tex]A=650\times 1.05^7[/tex]
[tex]A=650\times 1.4071[/tex]
[tex]A=914.615[/tex]
So the amount after 7 years will be $914.615
The operating system converts a basic user request into the set of detailed instructions that the computer hardware requires, thus acting as an intermediary between the application and the hardware.
A. True
B. False
Answer:
A
Explanation:
TRUE - The operating system converts a basic user request into the set of detailed instructions that the computer hardware requires, thus acting as an intermediary between the application and the hardware.
Craig is a salesperson for an industrial equipment company. Craig calls on factories and spends most of his time talking with equipment operators who work on the factory floor. While Craig is able to get the equipment operators interested in his products, he is often unable to make a sale. Craig needs to work on:________.
A. Determining other purchase decision influencers.
B. Improving his products.
C. Improving his attitude.
D. His cold canvassing ability.
E. His record keeping.
Answer:
The correct answer is letter "A": Determining other purchase decision influencers.
Explanation:
Sales are variable and require salespeople to adapt their speeches to their potential costumers. It is important to know in-deep the features of the product or service offered but that is not enough. Most sales are processed because of good closing strategies. There is when the sellers create a need for the product and convince consumers they must acquire whatever the salesperson is offering.
Thus, Craig should focus on other aspects of his sales strategy rather than only the technical features.
Salim files a case agaisnt nina for nonpayments of dues.before the trial. nina is examined under oath in the presense of salim's attorney. this process of examination is known as:_______.
Answer:
A) deposition
Explanation:
A witness or a party's deposition takes place before the actual trial starts, during discovery (or the investigation stage). During the deposition, the party or witness must answer the questions of the other party's attorney. Those questions are answered under oath, which means that lying is considered perjury and the party or the witness can be prosecuted for it.
Ken believes his company's overhead costs are driven (affected) by the number of direct labor hours because the production process is very labor intensive. During the period, the company produced 5,000 units of Product A requiring a total of 800 labor hours and 2,500 units of Product B requiring a total of 200 labor hours. What allocation rate should be used if the company incurs overhead costs of $20,000?
Answer:
The Absorption Overhead rate must be used which can be computed using the following formula:
Absorption Overhead Rate (OAR) = Total overhead / Absorption Basis
Here as we know that the absorption basis is labor hours because the overhead costs are driven by the direct labor hours and also that the total overhead is $20,000.
Putting values in the formula:
Absorption Overhead Rate (OAR) = $20,000 / (200 + 800)Hrs = $20 per Hr
Total Overheads share for Product A = $20 per hour * 800 Labor hrs worked on product A = $16,000
For unit Product A = $16000 / 5000 units of A = $3.2 per unit of product A
Similarly for Product B:
Total Overheads share for Product B = $20 per hour * 200 Labor hrs worked on product B = $4000
For unit Product B = $4000 / 2500 units of A = $1.6 per unit of prduct B
Hope Insurance Inc. customizes its marketing strategies to meet the needs of different customer groups. For its soon-to-be-retired customers, it advertises its insurance products as a means to a financially secure and comfortable old age. For customers aged 25 to 50 years, it promotes the same products as a means to a bright academic future for their children. Which of the following market segment approaches is best illustrated in this scenario? Total segment approach Niche market approach Concentration approach Mass market approach Multisegment approach
Answer:
Multisegment approach
Explanation:
Multi segment approach refers to a marketing strategy where a firm provides distinct offerings to different segments of it's target market. Every of the market segment is treated differently with regards to it's offerings and benefits to each market segment.
Liam is considering putting money in an investment plan that will pay him $52,000 in 12 years. If Liam’s opportunity cost rate is 7 percent compounded annually, what is the maximum amount he should be willing to pay for the investment today? Use a financial calculator to determine the amount.
a. $23,089
b. $25,526
c. $26,888
d. $28,685
e. $30,534
Answer:
a) The Maximum Liam should be willing to pay is $23,089
Explanation:
The maximum amount Liam should be willing to pay for the investment is the present value of the future amount of 52,000 discounted at 7%.
The present value of a future sum is its worth in today's terms.This represents how much Liam should be offered now to make him indifferent about the choice of receiving $52,000 in the future.
For example, It is the amount that should be invested today at 7% to become $52,000 in 12 years time.
The present value (PV) of a future sum (FV) can be ascertained using the formula below:
PV = FV × (1+r)^(-n)
PV = 52,000× (1+0.07)^(-12)
= 52,000×0.4440
= 23,088.62
= $23,089
The Maximum Liam should be willing to pay is $23,089
Final answer:
The maximum amount Liam should be willing to pay for the investment plan today is $23,089. This figure is found by calculating the present value of the projected $52,000 return, based on a 7% opportunity cost rate compounded annually over 12 years.
Explanation:
Liam is considering an investment plan that promises to pay him $52,000 in 12 years. To determine the maximum amount Liam should be willing to pay today, we need to calculate the present value of that future amount based on his opportunity cost rate of 7% compounded annually. Using a financial calculator or the present value formula, we perform the following calculation:
[tex]PV =\frac{ FV}{(1 + r)^n}[/tex]
Where PV is the present value, FV is the future value ($52,000), r is the annual interest rate (7% or 0.07), and n is the number of years (12).
The calculation will give us:
[tex]PV = \frac{\$52,000}{(1 + 0.07)^{12}}[/tex]
[tex]PV = \frac{\$52,000}{(07)^{12}}[/tex]
[tex]PV = \frac{\$52,000}{2.2523}[/tex]
PV = $23,089
Therefore, the maximum amount Liam should be willing to pay for the investment today is $23,089, which corresponds to option a.
Which e-commerce business model used in procurement and sourcing has a seller-operated service that consists of a number of electronic catalogs from suppliers within a market.
Answer:
The correct answer is: electronic marketplace.
Explanation:
An electronic marketplace gathers sellers and suppliers through the worldwide web who offer their products virtually to fasten the purchase process and reach a larger number of consumers. These characters have a well-structured business even if it is not physical. Their objective is to give consumers to shop online without the need of going to the store in person.
The cost of a completed job in a job-order costing system typically consists of the actual direct materials cost of the job, the actual direct labor cost of the job, and the manufacturing overhead cost applied to the job.A.TrueB.Flase
Answer:
True
Explanation:
For computing the cost of the completed jobs in a job-order costing system we have to consider the actual direct materials cost, actual direct labor cost, and the manufacturing overhead cost applied.
In mathematically,
The total cost of completed job = Direct Material cost + Direct labor cost + manufacturing overhead cost
Therefore, the given statement is true
Which is true about a process with a start event?
All paths in the process must end with an end event
Chosen paths in the process may end with an end event and the end events with incoming messages are shown as message events
Paths in the process reveal an end event and the end events optionally accept an incoming message
Paths with a start in the process must end with an end event
The end events must not accept an incoming messages
Answer:
All paths in the process must end with an end event
The end events must not accept an incoming messages
Explanation:
All paths in the process must end with an end event :
In a network of activity, all activity start with an event and end with an event. there must be an end to every activity that we undergo in a program.
The end events must not accept an incoming messages
An end event is an a single activity done to complete the intermediate and start activity. End event is the end of a process where no other activity or message is received. because for every message there must be a feedback.
In BPMN, for every process with a start event, all paths in that process must end with an end event, indicating the completion of a specific process or set of activities.
Explanation:In the context of Business Process Model and Notation (BPMN), which is a graphical representation for specifying business processes, the statement 'All paths in the process must end with an end event' is true about a process with a start event. This is primarily due to the existence of process flows where each initiated sequence flow (a path) must have a definitive start and end point for the purpose of clarity and completion of tasks. Hence, every start event initiates a path that must culminate in an end event, marking the completion of a specific process or a set of activities within the overall business process.
Learn more about BPMN here:https://brainly.com/question/31873282
#SPJ12
A registered representative works in the municipal finance department of a municipal securities firm in a large city and is defined as a Municipal Finance Professional (MFP). The firm recently completed a $100 million underwriting for the city and the firm is hosting a dinner to celebrate the closing of the deal. The event is expected to cost $300 per person, including the cost of a cocktail reception, dinner, and the cost transporting the group to and from the venue where the event is being held. The representative wishes to invite one of the town officials with whom he worked on the underwriting to the event. Which statement is TRUE about doing this?A. Taking this individual to dinner violates the MSRB $100 gift limit
B. Taking this individual to dinner is a violation because the $300 value exceeds the MSRB Political Contribution rule limit
C. Taking this individual to dinner is permitted because this is business entertainment
D. This individual cannot be taken to dinner because it is a conflict of interest
Answer:
C: Taking this individual to dinner is permitted because this is business entertainment
Explanation:
Had it been before the completion of underwriting that representative invited the town official, then it could lead to a conflict of interest. But the project is already complete and it seems purely a business entertainment, so there is no big deal in inviting the town official to the event to celebrate success.
Assume baseball player salaries are fully determined before the season starts. From the point of view of the baseball team owner, player salaries during the course of the season are then:______
A. variable costs.
B. marginal costs.
C. average costs.
D. fixed costs.
Answer:
The correct answer is option D.
Explanation:
Fixed costs incurred in the production process can be defined as the cost that does not change with the volume of output. It remains constant throughout the production process.
In the given example, the salaries of baseball players are fixed and will remain the same throughout the season. So, in the view of the team owner, it is a fixed cost as it remains constant.
Marcos launched a small business by inventing, patenting and commercializing a new hand tool. Big Co. has produced a cheaper knock-off version of the tool and is violating Marcos' patent. Litigating a patent will cost at minimum several hundreds of thousands of dollars, which Marcos cannot afford. In this situation, Marcos cana. a. Hire a litigator from a large law firm who will assemble a large and highly qualified team and charge hourly feesb. b. Hire a litigator from a small law firm who will charge hourly feesc. c. Hire a litigator who will agree to a contingent fee structure and require payment only if Marcos obtains a settlement or jury verdictd. d. Save the cost of hiring a lawyer by representing himself in court
Answer:
C) Hire a litigator who will agree to a contingent fee structure and require payment only if Marcos obtains a settlement or jury verdict.
Explanation:
Generally when lawyers agree to a contingent fee structure is because they are convinced their chances of winning are high. Lawyers will accept a fixed percentage of the amount recovered, usually this percentage is around 1/3 of the final settlement.
This type of agreement is very useful since you don't need to invest a lot of money, and the lawyer's pay comes from the money awarded by the jury (or a settlement).
Sam, an engineer, supervises the construction of a new bridge. When the bridge collapses due to faulty construction, Sam is sued by those injured in the collapse. As a professional, Sam is held to the same standard of care asa) ordinary persons.b) other professionals, including doctors, dentists, and lawyers.c) other engineers.d) those injured in the collapse of the bridge.
Answer: Other Engineers.
Explanation:
Sam is held responsible for the bridge collapse based on his role as the engineer in charge of the project. As an engineer care has to be taken in making accurate calculations and design to ensure there are no accidents or failure as a result of poor design.
At one time, most of the cars produced in Mexico were sold in Mexico. Today, however, Mexico both exports and imports cars. How can comparative advantage explain these data?
Answer:
Mexico's speciality is the manufacture of high-end vehicles and it exports those. They then import low-end vehicles that are usually manufactured at a low cost in other places.
Explanation:
Comparative advantage refers to the ability of an economy to create products and services at a reduced cost than that of the business partners.
Mexico's shift towards producing shoes, leveraging its comparative advantage, illustrates how trade benefits a country by allowing it to consume more goods. International trade also allows the merging of economies of scale with competition, leading to better products for consumers, exemplified by the global automotive industry.
The concept of comparative advantage explains how countries can gain from trade by specializing in the production of goods for which they have a lower opportunity cost relative to other goods. In Mexico's case, shifting toward producing more shoes, which they have a comparative advantage in, allows them to trade for more refrigerators than they could produce domestically. The numerical example showcases that by focusing on comparative advantage, Mexico can consume more goods than it could without trade.
Dynamic comparative advantage refers to changes in a country's comparative advantages over time, often due to factors such as technological advancements or changes in factor endowments. Through international trade and economies of scale, countries can benefit from improved competition and variety, leading to better quality and more choice for consumers, as seen in the diverse automotive industry.
What work-related tasks do you think would be appropriate to be delivered electronically, and what types do you feel would be better delivered in a more traditional setting?
Answer:
What I feel would be appropriate to be delivered electronically:
- Sending Daily report
- Requesting invoice for petty cash
- Working schedule
- Creating list of tasks.
I think every activities that does not necessarily need a lot of human communication should be delivered electronically . it just safe a lot of time and make it accessible anywhere you want.
What i feel would be better delivered in traditional setting:
- Brainstorming
- Firing people
I believe group brainstorming will be more efficient if team members spare their time to gather together in a private setting and focus on doing so. Doing it electronically will make it hard to communicate and some team members might not focusing on the task.
Firing people also should be done face-to-face. Even though this person is about to be kicked out of the team, we need to know that we appreciate what they've done to the team. Firing using electronic media just seems cold and impersonal.