Determine the number of molecules in 14.0 g of nitrogen dioxide (NO2).

Answer: Mass of diborane that would react with 7.5 mole of O2 is 70g

Explanation: The explanation is contained in the picture attached.

Answer:

147.473 g/mol

Explanation:

The correct option is C. Some of the absorbed energy is converted to potential energy and some is converted to kinetic energy

Explanation:

Thus by considering this above explanation it is clear that Option C can be consider as the opt answer

Answer:

Calcium oxide is ionic in nature. The Ca-O bond in CaO is formed by the transfer of electron from highly electropositive Ca to the highly electronegative oxygen atom.  The electronegativity difference should be high for the formation of ionic bond.

Explanation:

The ionic compound contains one highly electronegative atom and one highly electropositive atom. The ionic bond is formed by the transfer of electron from the more electropositive atom to electronegative atom.

In calcium oxide , Calcium is alkaline earth metal and it is highly electropositive atom while oxygen is highly electronegative atom. Calcium will transfer its 2 valence electrons to the oxygen atom. The electronegativity difference between calcium and oxygen is greater than 2.0. Hence, the bond in CaO is found to be ionic in nature.

CaO contains an ionic bond because calcium loses electrons to form a cation, and oxygen gains these electrons to form an anion. This electron transfer creates a strong attraction between the ions due to their opposite charges.

The compound CaO contains an ionic bond because of the difference in electronegativity between calcium (Ca) and oxygen (O). Calcium has a low electronegativity and tends to lose its two valence electrons easily, forming a [tex]Ca^{2+[/tex]  cation. Oxygen, having a much higher electronegativity, readily attracts these two electrons to complete its valence shell, forming an [tex]O^{2-[/tex] anion.

This transfer of electrons from calcium to oxygen results in the formation of ions, which attract each other due to opposite charges, resulting in a strong ionic bond that holds the CaO compound together. This bond is characteristic of the interaction between a metal like calcium (with low electronegativity) and a non-metal like oxygen (with high electronegativity).

Answer:

D alpha particles

Explanation:

Radioactive U-238 will decay into Thorium -232 by emitting alpha particles in the process of nuclear fission.

Nuclear fission is the radioactive decay process in which a heavy nucleus spontaneously disintegrates into two lighter ones and several other particles with a large release of energy.

     U-238      →     Th-232 + alpha particles +  2 neutrons + energy

This way the mass and atomic numbers are conserved;

According to the Arrhenius definition, Ca(OH)₂ is a Arrhenius base.

According to the Arrhenius theory, acids are those substance which gives H⁺ ion in the aqueous solution and bases are those substances which gives OH⁻ ion in the aqueous solution.

Chemical equation for the dissociation of Calcium hydroxide is:

Ca(OH)₂ → Ca²⁺ + 2OH⁻

From the above equation it is clear that Ca(OH)₂ is an Arrhenius base as it gives hydroxide ion.

Hence, Ca(OH)₂ is a Arrhenius base.

To know more about Arrhenius theory, visit the new link:
https://brainly.com/question/862975

#SPJ2

Calcium hydroxide, Ca(OH)₂, is a base according to the Arrhenius definition, as it produces hydroxide ions (OH-) when it dissolves in water. The equation representing this is Ca(OH)₂ (aq) → Ca²⁺ (aq) + 2OH- (aq). It is considered a strong base because it dissociates completely in water.

According to the Arrhenius definition, a base is a substance that releases hydroxyl ions (OH-) when it is dissolved in water. Calcium hydroxide, Ca(OH)₂, is considered to be a base because it dissociates in water to form calcium ions (Ca²⁺) and hydroxide ions (OH-). The chemical equation representing this process is: Ca(OH)₂ (aq) → Ca²⁺ (aq) + 2OH- (aq).

This depicts that calcium hydroxide is a base since it generates hydroxide ions (OH-) upon dissolution in water, which aligns with the countenance of a base as defined by Arrhenius. Because it dissociates completely in water solutions, it is acknowledged as a strong base.

The hydroxide ions (OH-) released into the solution are capable of combining with hydrogen ions (H+) to create water molecules. This reduces the solution's acidity and the concentration of free H+ ions, further signifying the behavior of a base.

https://brainly.com/question/34709118

#SPJ11

Answer

cation

Explanation:

If an atom losses electrons it forms a positively charged ion called the cation.

cation has more protons than electrons, thereby giving it a net positive charge.

To form a cation one or more electrons must be lost, typically pulled away by atoms with a stronger affinity for them.

The number of electrons lost, and so the charge of the ion, is indicated after the chemical symbol, e.g. zinc (Zn) loses two electrons to become Zn2+.

I hope this was helpful, please mark as brainliest

Answer:

NaClo3 is the reactant here.

Explanation:

In the reaction below:

                        [tex]H_{2} + O_{2}[/tex] ----------------------> 2[tex]H_{2} O[/tex]

Here       [tex]H_{2}[/tex] and [tex]O_{2}[/tex] are reactant, they take part in chemical reaction to form water as a product.

Answer:

Empirical formula is CH₂O.

Molecular formula = C₆H₁₂O₆

Explanation:

Given data:

Mass of hydrogen = 3.36 g

Mass of carbon = 20.00 g

Mass of oxygen = 26.64 g

Molar mass of compound = 180.156 g/mol

Empirical formula = ?

Molecular formula = ?

Solution:

Empirical formula:

It is the simplest formula gives the ratio of atoms of different elements in small whole number

Number of gram atoms of H = 3.36 / 1.01 = 3.3

Number of gram atoms of O = 26.64 / 16 = 1.7

Number of gram atoms of C = 20 / 12 = 1.7

Atomic ratio:

            C                      :        H            :         O

           1.7/1.7                :     3.3/1.7       :       1.7/1.7

              1                     :           2          :        1

C : H : O = 1 : 2 : 1

Empirical formula is CH₂O.

Molecular formula:

Molecular formula = n (empirical formula)

n = molar mass of compound / empirical formula mass

Empirical formula mass = CH₂O = 12×1 + 2× + 16

Empirical formula mass = 30

n = 180.156 / 30

n = 6

Molecular formula = n (empirical formula)

Molecular formula = 6 (CH₂O)

Molecular formula = C₆H₁₂O₆

Answer:

The right field is oceanography

Magnesium and calcium are more reactive with oxygen in the air than aluminum.

Magnesium and calcium are more reactive with oxygen in the air than aluminum.

Magnesium reacts with oxygen to form magnesium oxide (MgO), while calcium reacts with oxygen to form calcium oxide (CaO). Aluminum also reacts with oxygen, but it forms a thin layer of aluminum oxide (Al2O3) on its surface, which acts as a protective barrier to further reaction. This layer prevents aluminum from reacting as readily with oxygen compared to magnesium and calcium. Therefore, magnesium and calcium are more reactive with oxygen in the air than aluminum.

https://brainly.com/question/31871001

#SPJ3

Answer:

20m

Explanation:

mark brainliest

The density of ethanol is 0.78 g/mL and the density of benzene is 8.8 g/mL. Benzene is denser than ethanol.

The density of a substance is calculated by dividing its mass by its volume. To find the density of ethanol, divide its mass (3.9g) by its volume (5.0 mL). The density of ethanol is therefore 0.78 g/mL. To find the density of benzene, divide its mass (44g) by its volume (5.0 mL). The density of benzene is 8.8 g/mL. Since the density of benzene is higher than the density of ethanol, benzene is denser than ethanol.

https://brainly.com/question/34199020

#SPJ2

The density of ethanol is 0.78 g/mL and the density of benzene is 8.8 g/mL. Benzene is denser than ethanol.

To find the density of each liquid, the formula for density will be used:

[tex]\[ \text{Density} = \frac{\text{Mass}}{\text{Volume}} \][/tex]

Given:

Ethanol:

Volume [tex](\(V\))[/tex] = 5.0 mL

Mass [tex](\(m\))[/tex] = 3.9 g

Benzene:

Volume [tex](\(V\))[/tex] = 5.0 mL

Mass [tex](\(m\))[/tex]  = 44 g

Density of Ethanol:

[tex]\[ \text{Density of Ethanol} = \frac{3.9 \, \text{g}}{5.0 \, \text{mL}} \][/tex]

[tex]\[ \text{Density of Ethanol} = 0.78 \, \text{g/mL} \][/tex]

Density of Benzene:

[tex]\[ \text{Density of Benzene} = \frac{44 \, \text{g}}{5.0 \, \text{mL}} \][/tex]

[tex]\[ \text{Density of Benzene} = 8.8 \, \text{g/mL} \][/tex]

Answer:

(A) Removed and solid

Explanation:

Answer:

The equation is balanced

Explanation:

Before a equation can be said to be balanced the number of mole at the reaction side must be equal to number mole at the product side

Let's start with Zn at the reactant side 4 moles of Zn reacts and 4 moles of Zn was obtained from the product side which makes it balanced

Let's take HNO3

For H,10 moles react and 10 moles was obtained in the product side

For N,10 moles react and 8 moles was obtained initially and 2 moles was obtained as well which makes it 10 moles and it makes it balanced

For O,30 moles react and after calculating the total amount of O at the product side it was observed to be 30 which indicates that the equation is balanced...

The equation is absolutely well balanced

Temperature change would be 112.6° C.

Explanation:

We can find the amount or heat absorbed or emitted during any reaction by finding the product of their mass, specific heat, and change in temperature of the metal.

Mass of the iron, m = 50.0 g

Amount of heat absorbed, q = 2500 J

Change in temperature, ΔT = ?

Specific heat of Iron, C = 0.444 J/g °C

[tex]\boldsymbol{q}=\boldsymbol{m} \times \boldsymbol{C} \times \boldsymbol{\Delta} \mathbf{T}[/tex]

Plugin the values and rearrange the equation to get the change in temperature as,

[tex]\Delta \mathbf{T}=\frac{\mathbf{q}}{c \times m}[/tex]

[tex]\Delta \mathrm{T}=\frac{2500 \mathrm{J}}{0.444 \frac{J}{\mathrm{g}^{\circ} \mathrm{C}} \times 50 \mathrm{g}}=112.6^{\circ} \mathrm{C}[/tex]

The temperature of the iron sample would change by approximately [tex]\( 111.11 \, ^\circ \text{C} \)[/tex] as a result of absorbing 2500 J of thermal energy.

To determine the change in temperature of the iron sample, we need to use the specific heat capacity formula [tex]\[ q = m \cdot c \cdot \Delta T \][/tex]

where:

[tex]- \( q \)[/tex] is the amount of heat absorbed or released (in joules),

[tex]- \( m \)[/tex] is the mass of the substance (in grams),

[tex]- \( c \)[/tex] is the specific heat capacity of the substance (in joules per gram per degree Celsius),

[tex]- \( \Delta T \)[/tex] is the change in temperature (in degrees Celsius).

For iron, the specific heat capacity [tex]\( c \)[/tex] is approximately [tex]\( 0.450 \, \text{J/g}^\circ \text{C} \)[/tex].

Given:

[tex]- \( q = 2500 \, \text{J} \), - \( m = 50.0 \, \text{g} \), - \( c = 0.450 \, \text{J/g}^\circ \text{C} \).[/tex]

We can rearrange the formula to solve for [tex]\( \Delta T \)[/tex]:

[tex]\[ \Delta T = \frac{q}{m \cdot c} \][/tex]

Now, plug in the values:

[tex]\[ \Delta T = \frac{2500 \, \text{J}}{50.0 \, \text{g} \cdot 0.450 \, \text{J/g}^\circ \text{C}} \] \[ \Delta T = \frac{2500}{50.0 \times 0.450} \] \[ \Delta T = \frac{2500}{22.5} \] \[ \Delta T \approx 111.11 \, ^\circ \text{C} \][/tex]

The answer is: [tex]111.11 \, ^\circ \text{C}[/tex].

Answer:

322.1262g

Explanation:

This question is mole to mole reaction but the answer should be in gram.

4moles of Al gives 2 moles of Al2O3

3.1581 moles of Al gives x moles of Al2O3

Cross multiply

4x= 3.1581×2

4x=6.3162

X=6.3162/4

X=1.57905moles

To convert to gram

Moles ×molar mass

Molar mass of Al2O3 is 204g

Which means 1.57905×204= 322.1262g

Peloponnese: The mountainous southern peninsula of Greece, connected to central Greece by the Isthmus of Corinth. Greek name Pelopónnisos.

Answer:

A Peninsula

Explanation:

The Peloponnese is a peninsula and geographic region in southern Greece. It is connected to the central part of the country by the Isthmus of Corinth land bridge which separates the Gulf of Corinth from the Saronic Gulf. During the late Middle Ages and the Ottoman era, the peninsula was known as the Morea, a name still in colloquial use in its demotic form.

The peninsula is divided among three administrative regions: most belongs to the Peloponnese region, with smaller parts belonging to the West Greece and Attica regions.

Answer:

Explanation:

Any species that undergoes oxidation is itself a reducing agent or reductant.

The species that undergoes reduction in the course of a chemical reaction is an oxidant or reducing agent.

Any specie that loses electrons to another undergoes oxidation and is a reductant.

Species that gains electrons are called oxidant.

By integrating two or even more materials whose properties are quite distinctive is composite materials. The different materials work together to build special properties for the composite, but within the composite one can easily tell the various materials apart that they don't dissolve or mix together.

It is also recognized as Fiber-Reinforced Polymer (FRP) composites, which are constructed from a polymer matrix strengthened with engineered, man-made or natural fiber like glass, steel or aramid or other strengthening material.

Final answer:

The missing coefficient in the reaction Cl2O3 + H2O → HCIO3 is 2 in front of HCIO3, resulting in a balanced equation Cl2O3 + H2O → 2 HCIO3, which is a combination reaction.

Explanation:

The missing coefficient in the chemical equation Cl2O3 + H2O → HCIO3 should balance the number of atoms of each element on both sides of the equation. In this case, to balance chlorine and oxygen atoms, we should place a coefficient of 2 in front of HCIO3, resulting in Cl2O3 + H2O → 2 HCIO3. This is an example of a combination reaction, where two or more substances combine to form a single product. Below are several examples of different reaction types for context:

a. Combustion reaction: C6H5CH3 + 9O2 → 7CO2 + 4H2Ob. Decomposition reaction: 2NaHCO3 → Na2CO3 + H2O + CO2c. Synthesis reaction: C + 2H2 → CH4

To calculate the total heat absorbed by an 18g ice cube going from -10°C to water at 20°C, you sum the heat needed to raise the temperature of the ice to 0°C, the heat of fusion to melt the ice, and the heat needed to raise the temperature of the resulting water to 20°C.

The student is asking about the heat absorption process when an ice cube melts and warms up to ambient temperature. To find the total heat absorbed, you would calculate the heat needed to warm the ice from -10°C to 0°C, the heat required for the phase change from ice to water at 0°C, and then the heat needed to warm the water from 0°C to 20°C.

First, calculate the heat to warm the ice (Q1) using the formula Q = mcΔT, where m is the mass, c is the specific heat of ice, and ΔT is the temperature change. Then, calculate the heat to melt the ice (Q2) using the molar heat of fusion, given that the molar mass of water is approximately 18 g/mol. Finally, calculate the heat to warm the water (Q3) using the formula Q = mcΔT again, but this time with the specific heat of water.

The total heat (Qtotal) absorbed is the sum of Q1, Q2, and Q3. Note that in this example, the mass of ice and molar mass of water allows us to use a direct conversion from grams to moles for the heat of fusion calculation.

Answer:

The new volume will be 42, 7 L.

Explanation:

We use the gas formula, which results from the combination of the Boyle, Charles and Gay-Lussac laws. According to which at a constant mass, temperature, pressure and volume vary, keeping constant PV / T. The conditions STP are: 1 atm of pressure and 273 K of temperature.

P1xV1/T1 =P2xV2/T2

1 atmx 22,4 L/273K = 0,5atmx V2/260K

V2=((1 atmx 22,4 L/273K )x 260K)/0,5 atm= 42, 67L

The net force is the vector sum of all the forces acting on an object. If the net force is not zero, it means the forces are unbalanced. In this case, the net force is 303 N.

The net force is the vector sum of all the forces acting on an object. If the net force is zero, it means the forces are balanced and there is no change in the object's motion. If the net force is not zero, it means the forces are unbalanced and there will be an acceleration or deceleration of the object.

In this case, we have two forces given - 128 N and 175 N. To determine if the net force is balanced or unbalanced, we need to find the sum of these forces. Adding 128 N and 175 N gives us a net force of 303 N. Since the net force is not zero, the forces are unbalanced.

Answer:

0.45M

Explanation:

The following were obtained from the question:

C1 = 0.75M

V1 = 100mL

V2 = 165mL

C2 =?

Applying the dilution formula C1V1 = C2V2, the concentration of the diluted solution can be calculated for as follows:

0.75 x 100 = C2 x 165

Divide both side by 165

C2 = (0.75 x 100) /165

C2 = 0.45M

The concentration of the diluted solution is 0.45M

The new volume is 38 ml.

Explanation:

At NTP,

P1  = 760 mm,

P2 = 800 mm,

V1 = 40 ml

Boyle's law states that when a gas is held at a constant temperature and mass in a closed container, the volume and pressure vary inversely.

By applying Boyle's law,

                       P1  V 1  = P2  V2

where P1, P2 represents the pressure of a gas,

           V1, V2 represents the volume of a gas.

                        P1  V 1  = P2  V2

​              760×40 = 800×V  2

                          V 2   =  (760×40)  / 800

                           V2  = 38 mL.

The new volume of the gas at the increased pressure, while maintaining the same temperature, is 38 ml.

The correct formula to use in this situation is Boyle's Law, which states that for a given mass of gas at constant temperature, the pressure of the gas is inversely proportional to its volume. Mathematically, this can be expressed as:

[tex]\[ P_1V_1 = P_2V_2 \][/tex]

where [tex]\( P_1 \)[/tex] and [tex]\( V_1 \)[/tex] are the initial pressure and volume, and [tex]\( P_2 \)[/tex] and [tex]\( V_2 \)[/tex] are the final pressure and volume.

Given:

- Initial pressure, [tex]\( P_1 = 760 \)[/tex] mm Hg

- Final pressure, [tex]\( P_2 = 800 \)[/tex] mm Hg

- Initial volume, [tex]\( V_1 = 40 \)[/tex] ml

We want to find the final volume [tex]\( V_2 \)[/tex].

Using Boyle's Law:

[tex]\[ P_1V_1 = P_2V_2 \][/tex]

[tex]\[ 760 \times 40 = 800 \times V_2 \][/tex]

[tex]\[ V_2 = \frac{760 \times 40}{800} \][/tex]

[tex]\[ V_2 = \frac{30400}{800} \][/tex]

[tex]\[ V_2 = 38 \text{ ml} \][/tex]

The mass of water that should be added to 22.0 g of KCl to make a 5.50% by mass solution is 488.9 g.

To calculate the mass of water to be added, we can use the concept of mass percent. The mass percent is the mass of the solute divided by the mass of the solution, multiplied by 100%. We can set up the following equation:
Mass of KCl / (Mass of KCl + Mass of Water) = 5.50%
Let's solve for the mass of water:
Mass of Water = Mass of KCl / (0.055 - 1)
Mass of Water = 22.0 g / 0.045
Mass of Water = 488.9 g
Therefore,

488.9 g of water

should be added to 22.0 g of KCl to make a 5.50% by mass solution.

https://brainly.com/question/24441096

#SPJ12

Answer:

aluminum

Explanation:

i took the test

Answer:

Valence Electrons are transferred/exchanged

In ionic bonds, valence electrons are transferred from one atom to another, leading to the formation of oppositely charged ions that attract each other to create the bond.

In ionic bonds, valence electrons are transferred from one atom to another. This process involves the movement of electrons from an atom that has a relatively low number of electrons in its valence shell (often a metal) to an atom with a higher affinity for electrons (often a nonmetal), which has a relatively high number of electrons in its valence shell or a few electrons short of completing its shell. Through this transfer, the atom losing electrons becomes a positively charged ion (cation), and the atom gaining electrons becomes a negatively charged ion (anion). This electrostatic attraction between the oppositely charged ions forms the ionic bond. For example, in the formation of sodium chloride (NaCl), sodium (Na) loses one electron to become Na⁺, while chlorine (Cl) gains that electron to become Cl⁻, resulting in a stable ionic compound.

The complete question is:

Fill in the blanks:

In ionic bonds, valence electrons are _______.

its the oceam which is blue in color so