Answer:
The correct word for the blank space is: display it.
Explanation:
There are two levels of acting at work: deep level and surface level. Deep level implies recreating an emotion experienced so the acting can be displayed naturally. On the other hand, surface-level acting refers to faking the emotion to be displayed which could represent a psychological challenge for the worker.
Final answer:
Deep level acting is less psychologically costly as it involves truly experiencing the emotion, which leads to a more genuine portrayal of the character, fostering a closer bond with the audience through an emotionally authentic performance.
Explanation:
Deep level acting is less psychologically costly than surface level acting because in deep level acting, we are actually trying to experience the emotion, so we embody them truthfully through the character. When actors practice deep level acting, they tap into their own emotional reservoirs to authentically inhabit their roles, allowing them to live through the emotions rather than simply simulating them on the surface. This approach can lead to a more genuine connection between the actor and the character, which is essential for immersive and believable performances. Trust and safety in the acting environment, as well as a strong focus on the character's objectives, are necessary elements for an actor to comfortably engage in deep level acting. Furthermore, by connecting with their own vulnerabilities and authentically portraying those of the character, actors forge a strong bond with the audience, facilitating empathy and a shared emotional experience. Through deep level acting, actors can achieve a sense of freedom and authenticity in their performance, making it less psychologically expensive and more fulfilling artistically.
Data for an economy show that the unemployment rate is 6 percent, the participation rate 60 percent, and 200 million people 16 years or older are not in the labor force. How many people are employed in this economy? A. 300 million B. 30 million C. 188 million D. 282 million
Answer:
282 million
Explanation:
The unemployment rate is 6 %
the labor participation rate is 60%
200million are not in the labor force.
If 60 % is the participation rate and 200m m are not in the labor force, then 40% is not the labor force.
Therefore, 40% is equal to 200m
40% = 200m
100 % will be 200/40 X 100
=5 X 100 =500m
total population is 500 million
60% participation, is the labor force
60% of 500 million
=60/100 x 500
=300 million is the labor force.
Unemployment rate = unemployed people /labor x 100
employed people will labor force - unemployed people
= 6/100 x 300
=18million
employed people
=300 million -18 million
=282 million
Marketing Docs prepares marketing plans for growing businesses. For 2017, budgeted revenues are $1,500,000 based on 500 marketing plans at an average rate per plan of $3,000. The company would like to achieve a margin of safety percentage of at least 45%. The company’s current fixed costs are $400,000 and variable costs average $2,000 per marketing plan. (Consider each of the following separately.)
Required:
1. Calculate Marketing Docs breakeven point and margin of safety in units.
Answer:
Break even points = 400 units
margin of safety = $100
Explanation:
Given data:
budget revenue in 2017 = $1,500,000
Fixed cost =$400,000
total marketing plan = 500
take contribution margin/unit = Revenue - variable cost
= 3000 - 2000
contribution margin/unit = $1000
take break even sales $400
break even point [tex]= \frac{ Fixed cost}{contribution\ margin\ per\ unit}[/tex]
Break even point [tex]= \frac{400,000}{1000} = 400 units[/tex]
margin of safety is calculated as
margin of safety = total quantity to be sold - break even sales
= 500 - 400 = $100
According to the definition used by the U.S. Bureau of Labor Statistics, a person is not in the labor force if that person:
Group of answer choices:
O is going to school full time.
O is temporarily absent from a job because of illness.
O is out of a job and looking for work during the previous four weeks.
O has been temporarily laid off.
Answer:
The correct answer is A
Explanation:
The labor force is consist or comprise of the unemployed as well as employed people.
As per the U S Bureau of the statistics, the people who are neither looking for a job or work nor working are counted or considers as not in the labor force. Most of the people who are not involved in the labor force are the one who are going to school or are retired people. And the family responsibilities are out of the labor force.
Britney, Jewel, Colin, and Sheila are trying to form a band. They each have some basic skills on most instruments, so their current plan is for each of them to rotate among vocals, guitar, bass, and drums. After a year of practice and rehearsals the band still sounds awful. Britney cannot keep a steady beat when on bass or drums, Colin sounds terrible on everything except the bass, nobody except Jewel can remember all the chords on guitar, and even Sheila's own mother thinks her singing sounds like a dying cow. At their current rate, they expect it will be several years before they are good enough to land their first paid performance. None of them have enough money saved up to last that long.
Answer:
Tell each member to begin training in the roles they play better to gain from expertise benefits.
Explanation:
It's very clear that they are awful in the other parts. Colin should take the bass and jewel should take the guitar. Britney should sing and Sheila should play the drums. In this way they will all be focused on what they succeed at and practice till it makes perfect to save time before their cash runs out. Perhaps during the free time they might try their hands on other instruments they fancy.
Final answer:
The difficulties faced by a band in coordinating musical activities, the significance of shared identity and aspirations in the music community, and the importance of constructive criticism in the music industry.
Explanation:
Group musical activities or coordinated instrumental play can be challenging when individuals have difficulty performing on certain instruments or with specific skills. In this case, the band members face obstacles such as Britney's inability to keep a steady beat, Colin's struggle on most instruments except the bass, and so forth, leading to a lack of progress in their musical journey.
Shared identity within the music community can influence perceptions of success and opportunities, as seen in the band's aspirations for free college education to support their passion for music. This illustrates a connection between artistic pursuits and practical considerations such as education and career options.
Constructive criticism is essential in the music industry, as seen in contexts like American Idol where contestants' self-perceptions may clash with feedback from judges, highlighting the importance of self-awareness and growth in pursuing musical endeavors.
For the following accounts used by a retail business, determine the normal balance of each account (i.e., does the account normally have a debit or a credit balance?).mark each either debit or credit
Debit Credit
Freight-out
Income Summary with Net Income
Sales Discounts
Sales
Answer:
Freight out - Debit
Income Summary with net income -Credit
Sales discounts -Debit
Sales -Credit
Explanation:
First, we consider the description of the listed items and then determine their placements
Freight-out represents an expense that is related to transporting goods out the organisation to customers who have made purchases. As such it will have a debit balance as an expense
Income summary with net income - this simply means the amounts reported in the income summary shows a credit side that is higher than the debit side, meaning income is higher than expenses. Hence, it will have a credit balance.
Sales Discounts is a figure or an amount that reduces sales, hence if sales goes on the credit side, sales discount will show on the debit side.
Final answer:
The normal balances of the accounts 'Freight-out,' 'Income Summary with Net Income,' 'Sales Discounts,' and 'Sales' for a retail business are debit for Freight-out and Sales Discounts, and credit for Income Summary with Net Income (with net income) and Sales.
Explanation:
The normal balance for various accounts used by retail businesses can be understood by knowing that debits and credits always balance. Each type of account has its normal balance which is either a debit or a credit balance, typically influenced by the nature of transactions that the account records. Here are the normal balances for the mentioned accounts:
Freight-out: Has a normal debit balance since it is considered an operating expense account.
Income Summary with Net Income: Has a normal credit balance if the business has net income because revenues exceed expenses.
Sales Discounts: Has a normal debit balance as it reduces total sales, and is considered a contra-revenue account.
Sales: Has a normal credit balance, as it records the revenue earned from selling goods or services.
The corporate charter of Martin Corporation allows the issuance of a maximum of 4,000, 000 shares of $1 par value common stock. During its first three years of operation, Martin issued 3,200,000 shares at $15 per share. It later acquired 30,000 of these shares as treasury stock for $25 per share.
Required:
a. How many shares authorized?
b. How many shares were issued?
c. How many shares are outstanding?
d. What is the balance of the Common Stock account?
e. What is the balance of the Treasury Stock account?
Answer:
(a) 4,000,000
(b) 3,200,000
(c) 3,170,000
(d) $3,200,000
(e) $750,000
Explanation:
(a) Number of shares authorized = 4,000,000
(b) Number of shares issued = 3,200,000
(c) Number of shares outstanding:
= Number of shares issued - Acquired shares as treasury stock
= 3,200,000 - 30,000
= 3,170,000
(d) Balance of the Common Stock account:
= Number of shares issued × Par value
= 3,200,000 × $1
= $3,200,000
(e) Balance of the Treasury Stock account:
= Acquired shares as treasury stock × Price per share
= 30,000 × $25
= $750,000
Final answer:
Martin Corporation is authorized to issue 4,000,000 shares, has issued 3,200,000 shares, and has 3,170,000 outstanding shares. The Common Stock account balance is $3,200,000, and the Treasury Stock account balance is $750,000.
Explanation:
The corporate charter of Martin Corporation specifies the relevant information for answering the student's question:
Authorized shares: The maximum number of shares that the corporation is legally permitted to issue according to its corporate charter.Issued shares: The actual number of shares that have been sold to shareholders.Outstanding shares: Issued shares that are held by shareholders, excluding any treasury stock.Common Stock account: This account reflects the par value of all issued shares of common stock.Treasury Stock account: This account reflects the company's own shares that it has reacquired.Answers to the student's questions:
Authorized shares: Martin Corporation is authorized to issue 4,000,000 shares.Issued shares: Martin Corporation issued 3,200,000 shares.Outstanding shares: There are 3,170,000 shares outstanding (3,200,000 issued - 30,000 treasury stock).Balance of the Common Stock account: The balance is $3,200,000 (3,200,000 shares × $1 par value).Balance of the Treasury Stock account: The balance is $750,000 (30,000 shares × $25 paid per share).A number of activities that are a part of a company's quality control system are listed below:
a. Product testing.
b. Product recalls.
c. Rework labor and overhead.
d. Quality circles.
e. Downtime caused by defects.
f. Cost of field servicing.
g. Inspection of goods.
h. Quality engineering.
i. Warranty repairs.
j. Statistical process control.
k. Net cost of scrap.
I. Depreciation of test equipment.
m. Returns and allowances arising from poor quality.
n. Disposal of defective products.
o. Technical support to suppliers.
p. Systems development.
q. Warranty replacements.
r. Field testing at customer site.
s. Product design.
Required:
1. Classify the costs associated with each of these activities into one of the following categories: prevention cost, appraisal cost, internal failure cost, or external failure cost.
2. Which of the four types of costs in (1) above are incurred in an effort to keep poor quality of conformance from occurring? Which of the four types or costs in (1) above are incurred because poor quality of conformance has occurred?
Answer:
Explanation:
A. Product testing - Appraisal cost
B. Product recalls - External Failure cost
C. Rework labor and overhead - Internal Failure cost
D. Quality circles - Prevention cost
E. Downtime caused by defects - Internal Failure cost
F. Cost of field servicing - External Failure cost
G. Inspection of goods - Appraisal cost
H. Quality engineering - Prevention cost
I. Warranty repairs - External Failure cost
J. Statistical process control -Prevention cost
K. Net cost of scrap - Internal Failure cost
L. Depreciation of test equipment - Appraisal cost
M. Returns and allowances arising from poor quality - External Failure cost
N. Disposal of defective products - Internal Failure cost
O. Technical support to suppliers - Prevention cost
P. Systems development - Prevention cost
Q. Warranty replacements - Internal Failure cost
R. Field testing at customer site - Appraisal cost
S. Product design - Prevention cost
2. Which of the four types of costs in (1) above are incurred in an effort to keep poor quality of conformance from occurring? Prevention costs and appraisal costs.
Which of the four types or costs in (1) above are incurred because poor quality of conformance has occurred? Internal failure costs and external failure costs
The costs associated with each activity can be classified into prevention cost, appraisal cost, internal failure cost, or external failure cost. Prevention costs are incurred to keep poor quality of conformance from occurring, while internal failure costs occur because poor quality of conformance has occurred within the organization.
Explanation:The costs associated with each activity can be classified as follows:
Prevention cost: Product design, Quality circles, Quality engineering, Statistical process control, Systems developmentAppraisal cost: Inspection of goods, Depreciation of test equipmentInternal failure cost: Rework labor and overhead, Downtime caused by defects, Cost of field servicing, Net cost of scrap, Depreciation of test equipment, Returns and allowances arising from poor quality, Disposal of defective products, Technical support to suppliers, Systems developmentExternal failure cost: Product recalls, Warranty repairs, Warranty replacements, Field testing at customer sitePrevention costs are incurred to keep poor quality of conformance from occurring, while appraisal costs are incurred to assess the conformance of products. Internal failure costs occur because poor quality of conformance has occurred within the organization, while external failure costs occur because poor quality of conformance has occurred outside of the organization.
Learn more about Quality Control System here:https://brainly.com/question/32955634
#SPJ11
What sum of money today is equivalent to $8,250 2 years from now, if annual interest rate is 4%, compounding semi-annually?
Answer:
$7,621.72
Explanation:
The equation that describes the future value (FV) of an investment (P) at an interest rate (r) for a period of n years, compounded semi-annually is:
[tex]FV = P*(1+\frac{r}{2})^{2n}[/tex]
The amount required to yield $8,250 after 2 years at a rate of 4% per year is:
[tex]8,250 = P*(1+\frac{0.04}{2})^{2*2} \\P=\$7,621.72[/tex]
Computer maker Dell tries to have the lowest prices for its computers in order to attract a large consumer group. In Porter's four competitive strategies, this would be an example of the _____ strategy.
Answer: Cost leadership strategy
Explanation:
Cost leadership strategy is a business strategy in which a business operates at the lowest possible cost within it's industry so as to create a competitive advantage. This strategy is controlled by size, scope and cumulative experience, efficiency, etc.
Cost leadership strategy helps to :
I. Reduce the rate of competition in the market.
II. Enhance business sustainability.
III. Yield more profit for businesses.
The Equality Company is now breaking even at sales of $400,000. The company has a total fixed cost of $150,000. The company’s budgeted sales for next period are $600,000. What profit can the company expect for the next period?
Answer:
$75,000
Explanation:
The computation of the expected profit is shown below:
We know that
Break even point in sales dollars = (Total fixed cost) ÷ (Profit volume Ratio)
$400,000 = $150,000 ÷ Profit volume Ratio
So, the Profit volume Ratio is
= 37.5%
Now the expected profit would be
= Sales × Profit volume Ratio - total fixed cost
= $600,000 × 37.5% - $150,000
= $225,000 - $150,000
= $75,000
3.10 What will be the amount accumulated by each of these present investments? (a) $5,000 in 5 years at 7% compounded annually. (b) $7,250 in 15 years at 9% compounded annually. (c) $9,000 in 33 years at 6% compounded annually. (d) $12,000 in 8 years at 5.5% compounded annually.
Answer:
1) FV =7012.76
2) FV =26408
3) FV ==61565.31
4) FV =18416.24
Explanation:
The formula used for calculation of future value for given present investment is given as
FV = PV ( 1 + I )ⁿ
1) for PV = 5000, n = 5 year, I = 7%
FV = 5000*(1.07)^5
FV =7012.76
2) for PV = 7200, n = 15 year, I = 9%
FV= 7250*(1.09)^15
FV =26408
3) for PV = 9000, n = 33 year, I = 6%
FV= 9000*(1.06)^33
FV ==61565.31
4) for PV = 12000, n = 8 year, I = 5.5%
FV = 12000*(1.055)^8
FV =18416.24
Sanford Co. sells $500,000 of 10% bonds on March 1, 2020. The bonds pay interest on September 1 and March 1. The due date of the bonds is September 1, 2023. The bonds yield 12%. Give entries through December 31, 2021. Prepare a bond amortization schedule using the effective-interest method for discount and premium amortization. Amortize premium or discount on interest dates and at year-end. (Round answers to 0 decimal places, e.g. 38,548.)
To prepare a bond amortization schedule using the effective-interest method, you need to calculate various components such as interest expense, interest payment, carrying amount, discount or premium amortization, and book value.
Explanation:To prepare a bond amortization schedule using the effective-interest method for discount and premium amortization, you need to calculate the bond's interest expense, interest payment, bond carrying amount, discount or premium amortization, and the bond's book value. Here is a step-by-step guide:
Calculate the bond's interest expense: Interest expense = Carrying amount × Effective interest rateCalculate the bond's interest payment: Interest payment = Face value × Coupon rateCalculate the bond's carrying amount: Carrying amount = Face value + Premium or - DiscountCalculate the bond's discount or premium amortization: Discount or premium amortization = Interest payment - Interest expenseCalculate the bond's book value: Book value = Carrying amount + Discount or - PremiumRepeat steps 1 to 5 for each interest payment date and year-endUsing these calculations, you can create a bond amortization schedule to track the changes in the bond's carrying amount, interest expense, discount or premium, and book value over time.
Learn more about Bond amortization schedule here:https://brainly.com/question/32674194
#SPJ3
The detailed answer provides entries for a bond amortization schedule using the effective-interest method for discount and premium amortization.
Bond Amortization Schedule using Effective-Interest Method:
MAR 1, 2020: Cash 500,000; Discount on Bonds Payable 50,000; Bonds Payable 500,000
SEPT 1, 2020: Interest Expense 28,500; Discount on Bonds Payable 1,500; Cash 30,000
DEC 31, 2020: Interest Expense 27,120; Discount on Bonds Payable 880; Bonds Payable 28,000
Johansen Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. The Corporation has provided the following estimated costs for the next year:Direct materials...................................$6,000Direct labor.........................................$20,000Rent on factory building......................$15,000Sales salaries.....................................$25,000Depreciation on factory equipment......$8,000Indirect labor.......................................$12,000Production supervisor's salary.............$15,000Jameson estimates that 20,000 direct labor-hours will be worked during the year. The predetermined overhead rate per hour will be:A) $2.50 per direct labor-hourB) $2.79 per direct labor-hourC) $3.00 per direct labor-hourD) $4.00 per direct labor-hour
Answer:
A) $2.50 per direct labor-hour
Explanation:
The computation of the predetermined overhead rate is shown below:
Predetermined overhead rate = (Total estimated manufacturing overhead) ÷ (estimated direct labor-hours)
where,
Estimated manufacturing overhead = Rent on factory building + Depreciation on factory equipment + Indirect labor + Production Supervisor's salary
= $15,000 + $8,000 + $12,000 + $15,000
= $50,000
And, the estimated direct labor hours is 20,000
So, the rate is
= $50,000 ÷ 20,000
= $2.5 per direct labor-hour
Explain how differences in allocations between the risk-free security and the market portfolio can determine the level of market risk.
Answer:
just as the name implies, risk-free security have zero risk attached to them.beta=0
while a market portfolio has market risk that is ,its Beta = 1. the question says explain the differences in allocations between the risk free security and market portfolio
see below for further explanation
Explanation:
Explain how differences in allocations between the risk-free security and the market portfolio can determine the level of market risk.
just as the name implies, risk-free security have zero risk attached to them.beta=0
while a market portfolio has market risk that is ,its Beta = 1. the question says explain the differences in allocations between the risk free security and market portfolio
Assuming 30% of the portfolio is invested in risk-free securities, while 70% of the portfolio is invested in the market, then the portfolio will have Beta = 70%.
risk free securities are those securities which have no risk,they don't get struck by economic turbulence eg the US treasury bill.
while market portfolio are series of investment with diffrent assets.
Analyzing and Determining Liability Amounts
For each of the following situations, indicate the liability amount, if any, that is reported on the balance sheet of Bloomington Inc. at December 31, 2016.
Next to each situation, enter the liability amount reported on Bloomington's balance sheet. If the amount is not reported as a liability, enter zero as your answer.
a. Bloomington owes $250,000 at year-end 2016 for inventory purchase. $____
b. Bloomington agreed to purchase a $31,000 drill press in January 2017. $____
c. During November and December of 2016, Bloomington sold products to a customer and warranted them against product failure for 90 days. Estimated costs of honoring this 90-day warranty during 2017 are $6,100. $____
d. Bloomington provides a profit-sharing bonus for its executive equal to 5% of reported pretax annual income. The estimated pretax income for 2016 is $950,000. Bonuses are not paid until January of the following year. $____
Answer:
a) $250,000
b) Zero
c) $6,100
d) $47,500
Explanation:
a) Bloomington owes $250,000 at year-end 2016 for inventory purchase.\
This relates to account payable and the amount to be reported as liability as at year-end 2016 is $250,000.
b)Bloomington agreed to purchase a $31,000 drill press in January 2017.
No liability will be recognized at year-end because the entity has no present obligation as there is no legal or constructive responsibility to pay $31,000. What occurred is just an agreement that can be altered.
c) During November and December of 2016, Bloomington sold products to a customer and warranted them against product failure for 90 days. Estimated costs of honoring this 90-day warranty during 2017 are $6,100.
The entity will recognized $6,100 as warranty payable as the entity has a present obligation as at year-end 2016 to compensate the customer.
d)Bloomington provides a profit-sharing bonus for its executive equal to 5% of reported pretax annual income. The estimated pretax income for 2016 is $950,000. Bonuses are not paid until January of the following year
The entity will report 5% of $950,000 ($47,500) as liability at year-end 2016 as the the entity has a present obligation to settle its executive.
GDP is the: a. market value of an economy's production of final goods and services in a one year period. b. sum of coins, bills, and demand deposits circulating in an economy one year period. c. total expenditures of the federal government over the period of one year. d. market value of an economy's production of all goods and services in a one year period.
Answer:
a. market value of an economy's production of final goods and services in a one year period.
Explanation:
GDP is the sum of all final goods and services produced in an economy within a given period which is usually a year.
GDP = Consumption spending + Investment spending + Government Spending + Net Export
GDP doesn't include intermediate goods. Therefore it is not the market value of an economy's production of all goods and services in a one year period.
Total expenditures of the federal government over the period of one year is known as government spending.
I hope my answer helps you
The IMF has: a. helped support some weaker European countries during the recent financial crisis. b. been very helpful in monitoring international terrorists. c. ignored the cause of income inequality. d. provided significant funding for business start-ups globally. e. provided support to least-developed nations.
Answer:
The correct answer is letter "A": helped support some weaker European countries during the recent financial crisis.
Explanation:
The International Monetary Fund (IMF) is a U.S. based part of the United Nations (UN) agency that promotes international economic prosperity by cooperating with least-favored nations to reduce their unemployment rates. The fund has 189 members and had a vital contribution in the Western European economic recovery after their recent financial crisis as a consequence of unemployment, drop of purchasing power and public debt.
Dimitrov Corporation, a company that produces and sells a single product, has provided its contribution format income statement for July.
Sales (6,800 units) $401,200
Variable expenses 265,200
Contribution margin 136,000
Fixed expenses 103,500
Net operating income $32,500
If the company sells 6,700 units, its net operating income should be closest to:
a. $31,979
b. $32,500
c. $28,000
d. $30,500
Answer:
Option (d) is correct.
Explanation:
Contribution margin per unit:
= Contribution margin ÷ No. of units sold
= 136,000 ÷ 6,800
= $20 per unit
If the company sells 6,700 units, then
Net operating income:
= Contribution margin - Fixed expenses
= (6,700 units × $20 per unit) - $103,500
= $134,000 - $103,500
= $30,500
Therefore, the net operating income of this company is closest to $30,500.
On August 31 of the current year, the assets and liabilities of Gladstone, Inc. are as follows:
Cash $31,800;
Supplies, $740;
Equipment, $11,300;
Accounts Payable, $10,100.
What is the amount of equity as of August 31 of the current year?
Answer:
The equity for this firm is $32,540
Explanation:
Using the accounting equation we can solve for the equity:
assets = Liabilities + Equity
Equity = Assets - Liabilities
Now, we need to determiante the totals for assets and liabilities and sovle for equity:
Cash 31,800
Supplies 740
Equipment 11,300
Total Assets 43,840
Liabilities 11,300
Equity = 43,840 - 11,300 = 32,540
If a country imposes a tariff on imported cars because the government is particularly concerned about the incomes of auto workers over the incomes of other American workers, it is probably using the ____ argument for protectionism.
Answer:
The correct word for the blank space is: Infant-Industry.
Explanation:
Proposed by Alexander Hamilton (1757-1804) and Friedrich List (1789-1846) the Infant-Industry argument for protectionism is a position a country takes by imposing duties, tariffs or quotas to import products so the domestic industry can be protected. This argument proposes the levies must be imposed at least until the domestic industries competing with the import products mature.
The marketing concept focuses on meeting the company's short-term sales, ________, and profit needs, though that doesn't always serve the future best interests of either customers or the business.
Answer:
The answer is growth
Explanation:
Answer:
Growth
Explanation:
The marketing concept involves meeting the immediate sales, growth and profit needs of an organization.
It also involves trying to satisfy the immediate needs of customers better than competitors can.
This short term perspective is however, not in the future best interest of the business or its customers.
did the state's denial of unemployment benfitis to Thomas violate the free exercise clause of the first amendement? explain
Answer:
NO
Explanation:
The Supreme Court of the United States were of the opinion that beliefs and practices of religious bodies need not be acceptable, rational, or extensive to other people for the protection from the First Amendment to cover them in terms of free exercise of religion. Whether they were right or wrong, the religious conviction of Thomas were open and honest and the conclusion of the Court to transfer him to a place where he was included in weapon manufacture, effectively placed Thomas in a situation where he had to pick one between his religion and his job. The fact that Thomas departed his company was due to the employers decision and thus he inherently deserves unemployment compensation.
Robert Egger started the DC Kitchen, which has a mission to address hunger by empowering systems, that are already in place, to meet the needs of those in poverty.
True or False?
Answer:
The answer is True
Explanation:
The DC Kitchen which was started by Robert Egger was meant to address hunger by empowering minds and to meet the needs of those who were in poverty.
The statement is true. Robert Egger started the DC Kitchen, which aims to address hunger and poverty by empowering existing systems.
Explanation:The statement "Robert Egger started the DC Kitchen, which has a mission to address hunger by empowering systems, that are already in place, to meet the needs of those in poverty." is True. Robert Egger is the founder of DC Central Kitchen, which was started in 1989 to combat hunger and poverty in Washington, D.C. The organization operates a variety of programs that provide culinary job training, healthy meals to low-income individuals, and support to local food systems. Egger's approach is focused on utilizing existing resources and systems to create sustainable solutions to hunger and poverty.
Say that you have invented a new snack food product and would like to market it to college students. What are some of the advertising messages you would create to entice consumers to purchase the product? What elements of existing student culture would you show and/or promise? How might your product change college culture moving forward?
Explanation:
The ideal would be to create an advertising message that would bring value and engagement to the target audience that you want to reach, which in this case are young university students. Use more modern and informal communication, elements of youth culture, such as music, films and series, which add value to advertising to attract the desired audience.
It would also be important that advertising communication be carried out in colleges, through advertising on student radio or as a sponsor of sports games.
If the product is well aimed at meeting the needs of university students and has a positive response, in the future it can grow and be consumed by other students and thus become a product of value for young people.
How would the role of a project manager be different in an agile project life cycle, versus a plan-driven or traditional project life cycle?
Explanation:
Flexible(Agile) projects are much more able to modify with the changing requirements and are more flexible in design and can be implemented by the project manager. With the implementation of plan-based projects, management is concerned more about the use of time, costs, and resources and managers would like to monitor the input more closely and have less scope or opportunity to consider the box. The project manager's behavior is more hierarchical in nature and has little versatility in the conventional project life cycle.
In agile projects, the project manager acts more as a facilitator focusing on adaptability and customer feedback, whereas in plan-driven projects, the manager is more directive with detailed upfront planning and control. Agile emphasizes continuous improvement and iterative delivery, whereas traditional emphasizes upfront comprehensive planning and strict adherence to scope.
Explanation:The role of a project manager in an agile project life cycle contrasts with that in a plan-driven or traditional project life cycle mainly regarding flexibility, planning, and stakeholder involvement. In an agile environment, a project manager serves more as a facilitator or coach focusing on team collaboration, iterative progress, and customer feedback. On the other hand, in a plan-driven project, the project manager assumes a more directive role, with a heavy emphasis on detailed upfront planning, strict adherence to the pre-defined project scope, and a linear progression through project phases.
In agile methodologies, the project manager's responsibilities are to ensure that the team adapts to changing project requirements, promotes constant communication among team members and stakeholders, and frequently delivers functional segments of the product. This is a stark contrast to the traditional approach where the project manager creates detailed schedules, budgets, and scope plans at the project's outset (such as depicted in the planning process group and is less involved in the day-to-day development activities.
A keen understanding of project management knowledge areas such as integration, scope, time, cost, quality, human resource, communication, risk, and procurement management is crucial in both methodologies. However, the focus and execution of these areas differ greatly between agile and traditional project management. In agile, the emphasis is on continuous improvement and flexibility, whereas in traditional project management, the emphasis is on comprehensive upfront planning and control.
If a company’s employees are found guilty of unethical behavior, the U.S. Sentencing Commission can impose a base fine and multiply that fine by up to times, based on the organization’s
Answer:
Yes
Explanation:
The first step is to compute the base fine by determining what level of offense has occurred. After a base fine, the judge computes a culpability score, which is a way of assigning blame to the company. (This is important because the total fine is computed by multiplying the base fine by the culpability score).
The essence of the guidelines is not just to punish companies after their employees break the law, but rather to encourage companies to take proactive measures that will prevent white-collar crime before it happens.
Brown Company provided services to a customer and immediately collected $1,900 cash. Show how to record the transaction to the T-accounts by completing the following sentence. Service Revenue would be
Answer:
credited; right; debited; left
Explanation:
The journal entry to record this transaction is shown below:
Cash A/c Dr $1,900
To Service revenue A/c $1,900
(Being the cash is collected)
It to be displayed in T accounts
For cash account
Cash
Debit side
Service revenue $1,900
For service revenue account
Service revenue
Credit side
Cash $1,900
So, the cash account would be debited and would be displayed on the left hand side while the service revenue would be credited and would be displayed on the right hand side
On January 1, 2011, Baird Company had beginning balances as follows: Assets = $1,475 Liabilities = $560 Common Stock = $510 During 2011, Baird paid dividends to its stockholders of $500. Given that ending retained earnings was $740, what was Baird's net income for the 2011 accounting period?
Answer:
$835
Explanation:
Given that,
Assets = $1,475
Liabilities = $560
Common Stock = $510
Dividends paid to stockholders = $500
Ending retained earnings = $740
Beginning retained earnings:
= Assets - Liabilities - Common Stock
= $1,475 - $560 - $510
= $405
Net income:
= Dividends paid to stockholders + Ending retained earnings - Beginning retained earnings
= $500 + $740 - $405
= $835
Recently, European Union (EU) governments approved a five-year EU trade protection against grain-oriented electrical steel (GOES) from Russia, Japan, China, South Korea, and the United States. The protection would consist of minimum import prices on shipments of GOES from any of the five listed countries. This measure was enacted as a punishment for exporters in these countries for allegedly dumping their product (i.e., selling below cost) on the European market. The European Steel Association lauded the plan, noting it would help protect an important subdivision of the steel industry. However, transformer manufacturers, who use GOES as an input to their production, have protested the minimum prices. They argue minimum prices will result in prices for GOES that are too high and lead to some of these manufacturers to downsize or move production facilities outside the EU. Describe the various rivalries depicted in this scenario, and then use the five forces framework to analyze the industry.
Answer:
A producer - producer rivalry exists between the European Steel Association (ESA) and the GOES producers from Russia, Japan, China, South Korea, and the US. Both the ESA and the foreign firms produce the same product (GOES) and therefore compete against each other.
A producer - consumer rivalry exists between the ESA ans the European transformer manufacturers, since the transformer manufacturers consume GOES and the lower the price the better for them. On the other hand, the ESA produces GOES and wishes to sell their products a higher prices.
In this specific case, the bargaining and political power of suppliers (ESA) was larger than the bargaining power of the buyers (European transformer manufacturers). The threat of substitute products was basically eliminated by imposing minimum prices on imported GOES. The threat of new entrants is also very limited since not very may countries produce GOES in large scale, probably Brazil and Argentina could start selling GOES there, but the major competitors have virtually been eliminated. In this market, it is basically the ESA against everyone, but in this specific case, ESA won at least for the next 5 years.
The scenario describes rivalries between the EU and exporting countries, as well as the European Steel Association and transformer manufacturers. Using the Five Forces Framework, effects on supplier and buyer power, the threat of substitution or new entrants, and rivalries among existing competitors in the GOES industry are analyzed.
Explanation:In the provided scenario, there are multiple rivalries. The first rivalry is between the European Union and the countries that are accused of dumping GOES (Russia, Japan, China, South Korea, the United States). The EU aims to prevent damage to its industries by enforcing a trade restriction. The countries accused of dumping, on the other hand, are potentially seeking a gain in international market shares through price undercutting.
The second rivalry is internal, between the European Steel Association who favors the plan, and transformer manufacturers who are against it. These manufacturers foresee the minimum import prices to have negative effects on their businesses.
Application of the Five Forces Framework to the GOES industry reveals:
Supplier Power: The power of foreign GOES suppliers would be constrained by the proposed minimum import prices.Buyer Power: Transformer manufacturers, as the buyers, may find their bargaining power diminished as prices are pushed upwards.Threat of Substitution: Depending on the availability and costs of alternative materials, the threat of substitution could be heightened.Threat of New Entrants: The trade protection may disincentivize new foreign suppliers, but also potentially encourage new domestic producers.Rivalry Among Existing Competitors: Domestic producers may gain an advantage, altering the balance of competition. Learn more about Trade Protection and Industry Analysis here:https://brainly.com/question/32220685
#SPJ3
Suppose that France and Germany both produce fish and olives. France's opportunity cost of producing a crate of olives is 4 pounds of fish while Germany's opportunity cost of producing a crate of olives is 10 pounds of fish. By comparing the opportunity cost of producing olives in the two countries, you can tell that __________ has a comparative advantage in the production of olives and _______ has a comparative advantage in the production of fish.
Answer:
France
Germany
Explanation:
A country has comparative advantage in production if it produces at a lower opportunity cost when compared with other countries.
France has a lower opportunity cost in the production of olives compared to Germany.
It means that Germany would have a lower opportunity cost in the production of fish when compared to France.
I hope my answer helps you
France has a comparative advantage in the production of olives because it gives up less fish to produce them than Germany does. Conversely, Germany has a comparative advantage in fish production as it sacrifices less to produce fish than olives.
Explanation:Comparative advantage is an economic concept that identifies the goods a country can produce in a cost-effective way compared to other countries. In the scenario where France's opportunity cost for producing one crate of olives is 4 pounds of fish and Germany's opportunity cost for the same crate of olives is 10 pounds of fish, we can deduce that France has a comparative advantage in olive production and Germany has a comparative advantage in fish production since it gives up less to produce the same amount of fish as opposed to olives.
Learn more about Comparative Advantage here:https://brainly.com/question/34399484
#SPJ3