Answer:
Turbines in coal factories
Explanation:
Turbines in coal factories use steam power to move the turbine flaps and generate static electricity as energy output.
Explanation:
a machine or a device that transfers the motion of a hot gas to motion of an object is a rocket ship.
Which of these waves CANNOT travel through the vacuum of space?
If the energies sound in the device is microphone what is the energy out
Answer:
Microphones are a type of transducer - a device which converts energy from one form to another. Microphones convert acoustical energy (sound waves) into electrical energy (the audio signal). Different types of microphone have different ways of converting energy but they all share one thing in common: The diaphragm.
Explanation:
010 10.0 points
Calculate the depth in the ocean at which the
pressure is three times atmospheric pressure.
Atmospheric pressure is 1.013 x 10° Pa. The
acceleration of gravity is 9.81 m/s2 and the
density of sea water is 1025 kg/m”.
Answer in units of m.
Answer:
Therefore the depth in the ocean at which the presser is three times atmospheric presser is 20.15 m.
Explanation:
The pressure at some depth
[tex]P=P_\circ +\rho gh[/tex]
[tex]P_\circ=[/tex] atmospheric presser = [tex]1.013\times 10^5[/tex] Pa
[tex]\rho=[/tex] density of the sea [tex]= 1025 kg / m^3[/tex]
g = gravity = 9.81 m/s²
h = depth of the ocean
P= atmospheric presser at depth = [tex]3P_\circ[/tex]
Therefore
[tex]3P_\circ=P_\circ +\rho gh[/tex]
[tex]\Leftrightarrow \rho gh=2P_\circ[/tex]
[tex]\Leftrightarrow h=\frac{2P_\circ}{\rho g}[/tex]
[tex]\Leftrightarrow h=\frac{2 \times 1.013 \times 10^5}{1025 \times 9.81}[/tex]
[tex]\Leftrightarrow h= 20.15[/tex]
Therefore the depth in the ocean at which the presser is three times atmospheric presser is 20.15 m.
Which of the following is an effect of increasing the wavelength of an
electromagnetic wave?
Effect of increasing the wavelength of an electromagnetic wave
Explanation:
1.Wavelength = speed of light/frequency.
2.The frequency of an electromagnetic wave increases as wavelength decreases.
3.As wavelength decreases (and frequency increases) energy increases.
4.When frequency increases more wave crests pass a fixed point each second. That means the wavelength shortens. So, as frequency increases, wavelength decreases. The opposite is also true—as frequency decreases, wavelength increases.
Answer:
Energy decrease
Explanation:
While frequencies increase, energy increase
while wavelength increase, energy decrease
What is the force that holds protons together in the nucleus? (They should repel each other since they are positively charged)
The force is the strong nuclear force.
Explanation:
Every atom has a nucleus and various orbits surrounding it. The protons and neutrons are present in the nucleus while the electrons orbit around the nucleus. Protons are held together in the nucleus by the strong nuclear force. It is also called as the strong force. It holds together the subatomic particles within the nucleus. The nuclear force is the strongest of the four fundamental forces. Although it is the strongest, it can only act over short distances which are nuclear in length.Simple Harmonic Motion
Assignment Acire
Analyzing the Motion of a Spring
At which point(s) is the net force the greatest?
At which points) is the net force zero?
muman
- The net force is greatest at the position of maximum displacement
- The net force is zero when at the equilibrium position
Explanation:
The motion of a spring is a Simple Harmonic Motion, in which the displacement of the end of the spring is given by a periodic function of the form
[tex]x=Asin (\omega t)[/tex]
where A is the amplitude (the maximum displacement), and [tex]\omega[/tex] the angular frequency of the motion.
We can analyze the net force acting on the spring by looking at Hooke's law:
[tex]F=kx[/tex]
where
F is the net force
k is the spring constant
x is the displacement
From the equation, we notice immediately that:
The net force is the greatest when the displacement x is the greates, so at the position in which the spring has maximum compression or stretchingThe net force is zero when the displacement x is zero, so when the spring crosses the equilibrium positionLearn more about forces:
brainly.com/question/8459017
brainly.com/question/11292757
brainly.com/question/12978926
#LearnwithBrainly
Answer:
An illustration of a mass on a vertical spring with a transverse wave showing the position of the mass on the spring will make a transverse wave shape if bouncing up and down and moving horizontally. The shortest spring has the mass at the top of each crest and are labeled A and E respectively. The position where the mass in in the trough of the transverse wave would be labeled C and stretches the spring the farthest. The middle length springs has masses where the equilibrium of the material of the medium containing the transverse wave would be at the equilibrium of the material would be and are labeled B and D.
At which point(s) is the net force the greatest?
A,C, and E
At which point(s) is the net force zero?
B and D
Explanation:
Got it from engenuity
What is the defenition of mass
Answer:
the total matter contained in a body is called mass
Study the scenario.
A box is initially at the top of a slide, storing 80 J of gravitational energy. The isolated system includes the box, slide and earth.
As the box slides down the frictionless slide, what happens to the total energy of the system?
a) The total energy of the system increases to more than 80 J of energy as it gains other forms of energy
b) The isolated system stores 80 J of total energy, but it is converted to a different form of energy.
c) The isolated system stores slightly less than 80 J of total energy, and it is converted to a different form of energy
d) The total energy of the isolated system decreases to 0 once the box reaches the bottom of the slide.
Answer:
b) The isolated system stores 80 J of total energy, but it is converted to a different form of energy.
Explanation:
The Law of Conservation of Energy states that in an isolated system the total energy always remains constant. In our context this means that the box's energy cannot disappear from the isolated system of the box, slide, and the earth. Abiding the Law of Conservation of Energy, as the box slides down the friction-less table, its gravitational potential energy is converted into its kinetic energy.
Thus, in accord with the Law of Conservation of Energy, the energy of the system can neither decrease or increase, but is converted from one from to another. This rules of choices A, B, and C, leaving only choice B as correct.
A wave oscillates 5.0 times a second and has a speed of 4.0m/s what is the frequency of this wave
The frequency of a wave oscillates 5.0 times a second and has a speed of 4.0m/s is F=5Hz
what is the frequency of this wave?Question Parameters:
A wave oscillates 5.0 times a second and has a speed of 4.0m/s
Generally, the equation for the Frequency is mathematically given as
F=v/\lambda
Or
F=1/T
Therefore
Frequency is simply the amount of times the wave oscillates
In conclusion, The frequency of the wave is
F=5Hz
Read more about Time
https://brainly.com/question/4931057
Final Answer:
The frequency of the wave is 5.0 Hz.
Explanation:
The frequency of a wave is the number of oscillations it makes per second. In this case, the wave oscillates 5.0 times a second, so the frequency is 5.0 Hz. The frequency of a wave is a fundamental characteristic determined by the number of oscillations it completes in one second. This measurement, expressed in hertz, represents the cycles or oscillations per second. It is a crucial parameter in understanding wave behavior and is essential in various fields such as physics, telecommunications, and engineering. The relationship between frequency, speed, and wavelength is described by the wave equation, where frequency and speed are inversely proportional.
What is the amount of work done when a force of 10N moves a 20kg mass of 8 meters?
Yo sup??
we should know that
work done=force*displacement
W=F.s
F=10 N
s=8 m
therefore
W=10*8
=80 N
Hope this helps.
Final answer:
The work done when a 10 N force moves a 20 kg mass 8 meters is 80 Joules.
Explanation:
The work done can be calculated using the formula: Work = Force x Distance
Given that the Force is 10 N and the Distance is 8 meters, the work done is:
Work = 10 N x 8 m = 80 Joules.
ionic bonds form between what
if a substance cannot be separated physically or chemically it is?
Answer:
it would be an element as elements can not be broken down into something else
A sprinf has a potential energy of 84.08 J and a constant of 342.25 N/m. How far it been stretched? Use potential energy elastic equation (1/2kx^2)
The spring has been stretched 0.701 m
Explanation:
The elastic potential energy of a spring is the potential energy stored in the spring due to its compression/stretching. It is calculated as
[tex]E=\frac{1}{2}kx^2[/tex]
where
k is the spring constant
x is the elongation of the spring with respect to its equilibrium position
For the spring in this problem, we have:
E = 84.08 J (potential energy)
k = 342.25 N/m (spring constant)
Therefore, its elongation is:
[tex]x=\sqrt{\frac{2E}{k}}=\sqrt{\frac{2(84.08)}{342.25}}=0.701 m[/tex]
Learn more about potential energy:
brainly.com/question/1198647
brainly.com/question/10770261
#LearnwithBrainly
How much physical activity do adults need?
A. 60 minutes per day
B. 150 minutes per week
C. 20 minutes every other day
D. 90 minutes per week
Answer:
B. 150 minutes per week
Explanation:
American Heart Association suggests at least 150 minutes per week of moderate-intensity aerobic activity to adults.
A force of 40 N is applied to a 6 kg box of books. If the frictional force acting on the box is 16 N, and the box was initially at rest, what is the velocity of the box 10 s later? What is the box’s displacement over the 10 s period?
The final velocity is 40 m/s. The box will undergo a displacement of 200 m over the period of 10 s.
Answer:
Explanation:
So the net force acting on the box of books will be the difference of normal force and frictional force acting on the box. As the normal force acting on the box is 40 N and the frictional force is 16 N, then the net force is
Net force = 40 N - 16 N = 24 N.
Also, the mass of the box is given as 6 kg. So as per second law of motion, the acceleration can be found by ratio of net force to mass of the object.
Acceleration of the box = Net force/Mass = 24/6=4 m/s².
Then velocity can be determined using the first equation of motion.
v = u + at =0 + (4× 10 s) = 40 m/s.
So the final velocity is 40 m/s.
Similarly, by using the second equation of motion,
s = ut +1/2 at²
s = (0×10)+(0.5×4×10×10)=200 m
And so, the box will undergo a displacement of 200 m over the period of 10 s.
Two double bonds means that the total number of electrons being shared in the molecule is.
A. two
B. four
C. six
D. eight
(PLEASE HURRY AND ANSWER THIS QUESTION!)
Answer:
(D) eight
Explanation:
In carbon dioxide (CO2), there are two oxygen atoms for each carbon atom. Each oxygen atom forms a double bond with carbon, therefore the molecule is formed by two double bonds. Two double bonds means that the total number of electrons being shared in the molecule is. eight.
Is hydrogen chloride a mixture
Johanna makes the table below to organize her notes about centripetal forces.
A 2 column table with 3 rows. The first column is labeled Circular Motion with entries a space station in orbit, a child in a swing, a ball on a string. The second column is labeled Centripetal Force with entries x, blank, blank.
Which type of force should she place in the cell marked X?
tension
gravity
friction
normal
Answer is gravity
Answer:
Gravity, or B should be placed in the Cell labeled “X”
Explanation:
2021, Edge
Gravity is the type of force should she place in the cell marked X.
What is meant by Gravity?Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.Newton came up with the idea that some unseen force must attract the apple towards the Earth. He named this force “gravity”.Gravity is the type of force should she place in the cell marked X.
To learn more about Gravity refer:https://brainly.com/question/9934704
#SPJ2
Can water and wind change the shape of a mountain
Yes, Water and wind can change the shape of a mountain through the process of erosion. The mountains' sharp peaks and edges evolve from these erosive forces rather than their initial formation. In contrast, the Moon's mountains remain smooth because of the lack of water and wind erosion.
Yes, water and wind can indeed change the shape of a mountain. Through the process of erosion, elements such as water and ice weather the rocks of mountain ranges, reshaping their profiles over time. For instance, the sharp peaks and serrated edges of mountains are not the direct result of the forces that initially upthrust the crust to form the ranges; instead, these features develop from erosional processes that gradually tear down the mountains. Ice erosion, in particular, acts as a powerful sculptor of mountainous terrain.
Additionally, mountain grasses are influenced by strong winds, which can bend them and alter the landscape over time. During different times of day, mountain-valley winds occur due to temperature variations that cause air to rise or fall along mountain slopes, which can also impact the mountain's shape gradually. The same is true for ocean waves, which wear away the land and change the shapes of coastlines. The formation of the 'The Wave' at Vermillion Cliffs, along the Utah and Arizona border, is an example of how erosion by water and wind can sculpt landforms.
Contrasting with the earth, the Moon provides an example of how mountains look when they are not sculpted by these erosive forces. The Moon's highlands have a smooth and dulled appearance due to the absence of water and wind erosion, offering a stark comparison to Earth's dynamic erosive processes.
Identify the method of thermal energy transfer.
Answer:
a: radiation
b: convection
c: conduction
Explanaa:tion:
Suppose you and a friend are standing at opposite ends of a gymnasium and one of you claps will the other person hear the clap at the same time she sees it happen explain why or why not
Answer:
she will not because when it bounces off that is when u hear it
Explanation:
Answer:
No. Your friend will not hear the clap when he/she sees it.
Explanation:
What is unique about Neptune's discovery?
A)It was discovered by Kuiper
B)It was the first planet located through mathematical calculations
C)It was the first planet located through a telescope.
D) It's located right after the asteroid belt.
Please help!!! i will give brainliest *If Right*
Answer:
the answer is
B)It was the first planet located through mathematical calculations
The correct answer to the question is B) It was the first planet located through mathematical calculations. Neptune's discovery is unique because it was the first planet located through mathematical calculations, based on the gravitational effects observed in Uranus' orbit. This innovative approach was a monumental achievement in astronomy.
What is unique about Neptune's discovery? The unique aspect of Neptune's discovery lies in its method. Neptune was the first planet located not by direct observation but through mathematical calculations. This groundbreaking approach marks Neptune's discovery as a significant achievement in the field of astronomy.
The deviation in Uranus' orbit puzzled astronomers. This irregularity was attributed to the gravitational pull of an unknown planet, later identified as Neptune. Following these calculations, Neptune was discovered in 1846, right where it was predicted. This method of discovery, using the principles of gravitational theory and mathematical predictions rather than direct observation or accidental sighting, set Neptune apart from the discoveries of other planets.
the base of a rectangular vessel measure 10m by 18cm. water is poured into a depth of 4cm. (a) what is the pressure on the base?. (b) what is the thrust on the base?.
Answer:
a) P =392.4[Pa]; b) F = 706.32[N]
Explanation:
With the input data of the problem we can calculate the area of the tank base
L = length = 10[m]
W = width = 18[cm] = 0.18[m]
A = W * L = 0.18*10
A = 1.8[m^2]
a)
Pressure can be calculated by knowing the density of the water and the height of the water column within the tank which is equal to h:
P = density * g *h
where:
density = 1000[kg/m^3]
g = gravity = 9.81[m/s^2]
h = heigth = 4[cm] = 0.04[m]
P = 1000*9.81*0.04
P = 392.4[Pa]
The force can be easily calculated knowing the relationship between pressure and force:
P = F/A
F = P*A
F = 392.4*1.8
F = 706.32[N]
a). The pressure that lies on the base would be:
[tex]P =392.4[Pa][/tex]
b). The thrust that exists on the base would be:
[tex]F = 706.32[N][/tex]
a). Given that,
Length of the rectangular vessel [tex]= 10m[/tex]
The Breadth of the rectangular vessel [tex]= 18cm or 0.18m[/tex]
Area of the vessel [tex]= L[/tex] × [tex]B[/tex]
[tex]= 10[/tex] × [tex]0.18[/tex]
[tex]= 1.8m^2[/tex]
To find the pressure,
Pressure(p) = Density × g × h
With
Density [tex]= 1000 kg/m^3[/tex]
Gravity(g) = [tex]9.81m/s^2[/tex]
Height(h) = [tex]4 cm[/tex] or [tex]0.04m[/tex]
So,
P [tex]= 1000[/tex] × [tex]9.81[/tex] × [tex]0.04[/tex]
∵ [tex]P = 392.4[/tex]
b). Since,
Pressure [tex]= F/A[/tex]
⇒ [tex]F = P[/tex] × [tex]A[/tex]
⇒ [tex]F = 392.4[/tex] × [tex]1.8[/tex]
∵ Thrust or Force [tex]= 706.32 N[/tex]
Learn more about "Pressure" here:
brainly.com/question/23358029
24. a. Calculate the work needed to lift a 90-N
block of ice a vertical distance of 3 m. What
PE does it have?
Answer:
270J
Explanation:
Work = force x distance
Force =90N
Distance =3m
Work = 90 x 3
Work = 270J
P. E= 270J
I hope this was helpful, Please mark as brainliest= work / time
The work needed to lift the 90-N block of ice 3 m vertically is 270 J, and the block possesses 270 J of potential energy.
Work Done: To calculate the work done in lifting a 90-N block of ice 3 m vertically, you use the formula: Work = force x distance. So, Work = 90 N x 3 m = 270 J. The potential energy (PE) of the block at that height is equivalent to the work done, so the block has 270 J of potential energy.
Can u guys please answer this. And explain ur answer pleaseeeeeee❗️❗️❗️❗️
Answer:
Imp = -4 [kg*m/s]
Explanation:
To determine the impulse we must know the initial speed and final velocity of the ball, that is before and after hitting the wall. As these data are given in the input information, we can very easily find the value of the impulse given during the hit on the wall.
[tex]m*v_{1}+Imp=mv_{2} \\Imp= m*v_{2}-m*v_{1}\\Imp = (2*4)-(2*6)\\Imp = -4[kg*\frac{m}{s} ] \\[/tex]
The negative sign means that the impulse is given in the opposite direction to the one that the ball was thrown.
0. A 1700-W machine operates at 120 V. What i
machine operates at 120 V. What is the resistance in the machine?
A. 7.1 x 1022 ohms
B. 1.2 x 1021 ohms
C. 1.4 ohms
D. 8.5 ohms
Option D
The resistance in machine is 8.5 ohms
Solution:
Given that,
Power = 1700 W
Voltage = 120 V
We have to find the resistance in machine
The formula used is:
[tex]P = \frac{V^2}{R}[/tex]
Where,
"P" is the electric power and "V" is the voltage and "R" is the resistance
Substituting the given values we get,
[tex]1700 = \frac{120^2}{R}\\\\1700 = \frac{14400}{R}\\\\R = \frac{14400}{1700}\\\\R = \frac{144}{17}\\\\R = 8.47 \approx 8.5[/tex]
Thus resistance in machine is 8.5 ohms
What kind of line on a distance vs. time graph indicates that the object is accelerating?
Answer: a curved line
Explanation: a straight line indicates that the object is moving at a constant velocity because it has one slope, but a curved line on a distance-time graph indicates that the velocity is constantly changing because the slope is changing, which is acceleration. the line could be curved in any direction, as long as it shows a change in slope.
Final answer:
A curved line on a distance vs. time graph indicates that the object is accelerating. For constant acceleration, this curve will be parabolic. Acceleration is the slope of the tangent on the velocity vs. time graph derived from the distance-time graph.
Explanation:
On a distance vs. time graph, an object that is accelerating will not have a straight line but rather a curved line. This curve represents the change in speed over time. If the object is speeding up, the curve will be getting steeper, which indicates positive acceleration. In the case of constant acceleration, the distance-time graph is a parabola. The acceleration can be determined from the slope of the velocity vs. time graph, which in turn can be derived as the derivative of the position function from the distance-time graph. In conclusion, an accelerating object will be represented by a curved line on a distance vs. time graph, with the curvature indicating the acceleration's direction and magnitude.
Consider the gravity of the four spheres. If we wanted sphere C to attract the other three spheres, what is one feature of sphere C we must change?
A) Increase its mass.
B) Make it less dense.
C) Increase its diameter.
D) Change its composition.
Answer:
The correct answer is A.
Explanation:
A greater mass means a greater gravitational pull. To give Sphere C more gravitational pull you mus increase its mass
Find the total kinetic energy of a 10 kg object traveling at 5 m/s to the right and a 15 kg object traveling at 10 m/s to the left?
Answer:875joules
Explanation:
A 0.17 kg hockey puck slows down trom 54 m/s to 35 m/s when it slides on horizontal ice surface. Find the change in momentum of the puck?
Answer:
D_momentum = 3.23[kg*m/s]
Explanation:
The change of moment can be easily determined by applying the principle of momentum and amount of movement
initial data are:
[tex]m_{1}=0.17[kg]\\ m_{2}=0.17[kg]\\v_{1}=54[m/s]\\v_{2}=35[m/s]\\D_{momentum}= m_{1}*v_{1}-m_{2}*v_{2}\\D_{momentum}=0.17(54-35)\\D_{momentum}= 3.23[kg*m/s][/tex]
Given values,
Mass,
[tex]m_1 = 0.17 \ kg[/tex][tex]m_2 = 0.17 \ kg[/tex]Velocity,
[tex]v_1 = 54 \ m/s[/tex][tex]v_2 = 35 \ m/s[/tex]We know,
→ [tex]D_{momentum } = m_1\times v_1-m_2\times v_2[/tex]
By putting the values,
[tex]= 0.17\times 54-0.17\times 35[/tex]
[tex]= 0.17(54-35)[/tex]
[tex]= 0.17\times 19[/tex]
[tex]= 3.23 \ kg.m/s[/tex]
Thus the above approach is right.
Learn more about momentum here:
https://brainly.com/question/22161504