Particles are arranged in a crystal structure in a sample of

Answer: 6.25 L (6L if sig figs)

Explanation:

The relationship between pressure and volume is inverse when temperature is constant, where P1V1=P2V2

P1 = 100

P2 = 40

V1 = 2.5

Plug in to get 100(2.5) = 40v2

Solve for v2 = 250/40 = 6.25 L

This makes sense because if the pressure decreases the volume increases.

if your teacher has you do sig figs and you kept the sig figs from the problem, then there should be 1 sig fig (from 40 kPa) so the answer would be 6 L.

The volume of the gas when temperature is constant is 6.25 L.

Relation between the pressure and volume of the gas by using the ideal gas equation will be represented as:

P₁V₁ = P₂V₂, where

P₁ & V₁ are the initial pressure and volume.

P₂ & V₂ are the final pressure and volume.

On putting values from the question, we get

V₂ = (100)(2.5) / (40) = 6.25 L

Hence required volume is 6.25 L.

To know more about ideal gas equation, visit the below link:
https://brainly.com/question/25290815

#SPJ2

Answer:

Explanation:

Radioactive material can leave the patient’s body through saliva, sweat, and urine

Answer:

Radioactive material can leave the patient's body through saliva, sweat, and urine.......

Explanation:

Answer:

[tex]\boxed{\text{donate electrons}}[/tex]

Explanation:

An atom with one to three valence electrons would have to gain seven to five valence electrons, respectively to get a stable octet.

It is easier for it to donate electrons and expose the stable octet of electrons in the shell below..

(A) is wrong. You can't move electrons to a lower shell, because it's already full.

(B) is wrong. The atom will donate electrons.

(C) is wrong. Moving electrons to a higher shell will make the atom more unstable.

Answer:

153.8 g/mol.

Explanation:

The molar mass of a compound = ∑ atomic masses of atoms.

∴ The molar mass of CCl₄ = 1(atomic masss of C) + 4 (atomic mass of Cl) = (12.0 g/mol) + 4 (35.45 g/mol) = 153.8 g/mol.

From the information provided in question, the metal is copper.

The specific heat capacity of a substance is an intrinsic property. It can be used to identify a substance. Intrinsic properties are characteristic of substances. From the information provided, we can obtain the specific heat capacity of the metal.

Using;

H = mcdT

Where;

H = Heat absorbed

m = mass of the metal

c = specific heat capacity of the metal

dT = temperature change

20 J = 0.0052 Kg × c × ( 40.0°C - 30.0°C)

c = 20 J/0.0052 Kg × ( 40.0°C - 30.0°C)

c = 385 JKg-1°C-1

The metal is copper.

Learn more: https://brainly.com/question/1209542

Answer:

Heat flows from the coffee to the spoon through conduction

Explanation: I took did the lab assignment

Heat flows from the coffee to the spoon through conduction. Therefore, option C is correct.

Conduction is one of the three main modes of heat transfer, alongside convection and radiation. It refers to the transfer of heat energy through direct contact between objects or substances that are at different temperatures.

Conduction occurs more efficiently in materials that are good conductors of heat, such as metals, which have closely packed atoms and free electrons that can easily transfer thermal energy. Materials with poor conductivity, such as insulators like wood or plastic, impede the transfer of heat by conduction.

Learn more about conduction, here:

https://brainly.com/question/31201773

#SPJ4

Your question is incomplete, most probably the full question is this:

Which statement describes how heat flows from the coffee to the part of the spoon in the coffee?

A. Heat flows from the coffee to the spoon through radiation.

B. Heat flows from the coffee to the spoon through convection.

C. Heat flows from the coffee to the spoon through conduction.

D. Heat flows from the coffee to the spoon through radiation, convection, and conduction.

Answer:

A. because the wood is stored chemical energy and it is converting into heat energy

Answer:

Chemical potential energy converting to heat energy.

Explanation:

Burning of wood in a fire place or burning of any other compound in presence of oxygen involves combustion. During combustion there is breaking and making of bonds as combustion is a chemical reaction.

For example:

Combustion of carbon gives carbon dixoide:

[tex]C(s)+O_{2}(g)-->CO_{2}(g)[/tex]

Combustion is an exothermic reaction, it releases large amount of energy.

Thus in all we are converting the chemical energy of a substance to heat energy during combustion.

Hence combustion involves Chemical potential energy converting to heat energy.

Answer:

The gold sample will experience a greater increase in temperature.

Explanation:

Q = m.c.ΔT,

where, Q is the amount of heat absorbed by substance.

m is the mass of the substance.

c is the specific heat of the substance.

ΔT is the difference between the initial and final temperature.

∴ ΔT = Q /(m.c)

It is clear that ΔT is inversely proportional to the specific heat capacity of the object.

So, the object with the smallest specific heat capacity (gold) will have the greater increase in temperature.

For gold:

ΔT = Q /(m.c) = (25 cal)/(5.0 g)(0.03 cal/g°C) = 166.7°C.

For iron:

ΔT = Q /(m.c) = (25 cal)/(5.0 g)(0.11 cal/g°C) = 45.45°C.

The gold sample will experience a greater increase in temperature.

Answer:

The gold sample will experience a greater increase in temperature.

Explanation:

The answer is:

The percent yield of the reaction is 32.45%

To calculate the percent yield, we have to consider the theoretical yield and the actual yield. The theoretical yield as its name says is the yield expected, however, many times the difference between the theoretical yield and the actual yield is notorious.

We are given that:

[tex]ActualYield=37.6g\\TheoreticalYield=112.8g[/tex]

Now, to calculate the percent yield, we need to divide the actual yield by the theoretical and multiply it by 100.

So, calculating we have:

[tex]PercentYield=\frac{ActualYield}{TheoreticalYield}*100\\\\PercentYield=\frac{37.6g}{112.8g}*100=0.3245*100=32.45(percent)[/tex]

Hence, we have that the percent yield of the reaction is 32.45%.

Have a nice day!

We need to find what percent 37.6 is out of 112.8 .

First find what fraction of 112.8 it is:  (37.6/112.8) = 1/3

Change the number to a percentage:  (1/3 x 100) = (33 and 1/3) %

The gas particles squeeze closer together

B) the gas particles squeeze closer together.

Answer:

1. The amount required of H₂ = 11.0 g.

2. The amount required of O₂ = 88.0 g.

Explanation:

2H₂(g) + O₂(g) → 2H₂O,

It is clear that 2.0 moles of H₂ react with 1.0 mole of O₂ to produce 2.0 moles of H₂O.

Q1: How much hydrogen would be required to produce 5.5 mol of water?

Using cross multiplication:

2.0 mol of H₂ produce → 2.0 mol of H₂O, from stichiometry.

??? mol of H₂ produce → 5.5 mol of H₂O.

∴ the no. of moles of H₂ needed to produce 5.5 mol of water = (2.0 mol)(5.5 mol)/(2.0 mol) = 5.5 mol.

mass of H₂ = (no. of moles)(molar mass) = (5.5 mol)(2.0 g/mol) = 11.0 g.

Q2: How much oxygen would be required?

Using cross multiplication:

1.0 mol of O₂ produce → 2.0 mol of H₂O, from stichiometry.

??? mol of O₂ produce → 5.5 mol of H₂O.

∴ the no. of moles of O₂ needed to produce 5.5 mol of water = (1.0 mol)(5.5 mol)/(2.0 mol) = 2.75 mol.

mass of O₂ = (no. of moles)(molar mass) = (2.75 mol)(32.0 g/mol) = 88.0 g.

2H₂(g) + O₂(g) → 2H₂O

From the balanced equation above,

2 moles of H₂O were produced from the reaction of 2 moles of H₂ and 1 mole of O₂

From the balanced equation above,

2 moles of H₂O were produced from the reaction of 2 moles of H₂

Therefore,

5.5 moles of H₂O will also be produced from the reaction of 5.5 moles of H₂

Thus, 5.5 moles of H₂ is needed for the reaction

From the balanced equation above,

2 moles of H₂O were produced from the reaction of 1 mole of O₂

Therefore,

5.5 moles of H₂O will be produced from = 5.5 / 2 = 2.75 moles of O₂

Thus, 2.75 moles of O₂ is needed for the reaction

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ5

Answer:

1. Heat capacity is the ratio of the amount of heat energy transferred to an object to the resulting increase in its temperature.

2. Specific heat capacity is the amount of heat energy required to raise the temperature of a substance per unit of mass.

3. The gold will warm by ten degrees first because it needs a low amount of heat (12.9 J) while Aluminium needs (90.3 J).

4. The 20 gram piece of aluminum will warm first.

Explanation:

1. What is heat capacity?

Heat capacity is the ratio of the amount of heat energy transferred to an object to the resulting increase in its temperature.

2. What is specific heat?

Specific heat capacity is the amount of heat energy required to raise the temperature of a substance per unit of mass.

3. You have a 10 gram piece of aluminum and a 10 gram piece of gold sitting in the sun. Which metal will warm by ten degrees first?

Q = m.c.ΔT.

where, Q is the amount of heat absorbed by Aluminium or gold (Q = ??? J),

m is the mass of Aluminium or gold (m = 10.0 g),

c is the specific heat capacity of Aluminium or gold (c of Al = 0.902 J/g °C, c of Au = 0.129 J/g °C),

ΔT is the temperature difference (final T - initial T) (ΔT = 10.0°C).

So, the gold will warm by ten degrees first because it needs a low amount of heat (12.9 J) while Aluminium needs (90.3 J).

4. You have a 20 gram piece of aluminum and a 40 gram piece of aluminum sitting in the sun. Which piece will warm by ten degrees first?

∵ Q ∝ m.

∴ The piece of higher mass (40 g) will needs a heat larger twice than that needed to warm the (20 g) piece.

So, the 20 gram piece of aluminum will warm first.

Heat capacity is the amount of heat energy necessary to change the temperature of a substance, while specific heat is similar but normalized to the mass of the substance. Therefore, substances with higher specific heat heat up more quickly. Aluminum has a higher specific heat than gold, so it will heat up more quickly when exposed to the sun.

Heat capacity is the amount of heat energy required to raise the temperature of a substance by a given amount. It's measured in joules per degree Celsius (J/°C).

On the other hand, specific heat refers to the amount of heat energy required to raise the temperature of a specific quantity (typically 1 gram or 1 kilogram) of a substance by one degree Celsius. It's a characteristic property of a substance, and its units are usually Joules per gram degree Celsius (J/g°C).

Regarding the two 10 gram pieces of aluminium and gold sitting in the sun, aluminium will heat up faster. This is because aluminium has a higher specific heat compared to gold, meaning it requires less energy to increase its temperature.

For the 20 gram and 40 gram pieces of aluminium, the 20 gram piece will warm faster by ten degrees given that it has less mass and therefore needs less energy to increase its temperature.

https://brainly.com/question/28302909

#SPJ3

Answer:

The right choice is  V₂ = 195.7 L

Explanation:

where, P is the pressure of the gas in atm.

V: is the volume of the gas in L.

n: is the no. of moles of the gas in mol.

R:  is the general gas constant,

T: is the temperature of the gas in K.

If n is constant, and have different values of P, V and T:

(P₁*V₁) / T₁ = (P₂ * V₂) / T₂

Knowing that:  

V₁  =  225 L  ,         P₁ = 0.940 atm

T₁ = 25  °C + 273  =  298 K

V₂  =  ??? L,           P₂ = 0.990 atm  

T₂ = 0 °C + 273  =  273 K

applying in the above equation

(P ₁* V₁) / T₁ = (P₂ * V₂) / T₂

(0.940 atm * 225 L) / 298 K= (0.990 atm  * V₂) / 273 K

V₂ = (0.940 atm * 225 L * 273 K) / (298 K * 0.990 atm)

V₂ = 195.7 L

So, the right choice is:

V₂ = 195.7 L

By applying the combined gas law, the new volume of the air-filled balloon, considering changes in pressure and temperature, is approximately 188.2 L.

Given:

V1 = 225 L

P1 = 0.940 atm

T1 = 25 °C

P2 = 0.990 atm

T2 = 0 °C

To find: V2

We can use the combined gas law to solve this problem:

P1V1 / T1 = P2V2 / T2, where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

Rearranging the equation to solve for V2, we get:

V2 = V1 × (P1 / P2) × (T2 / T1)

Plugging in the given values, we get:

V2 = 225 L × (0.940 atm / 0.990 atm) × (273 K / 298 K)

V2 = 188.2 L

So, the new volume of the balloon is indeed 188.2 liters.

Answer:

Copper and aluminium nitrate

Explanation:

The reaction is a simple redox reaction. Where copper ions are reduced to copper atoms and the aluminium atoms oxidized to aluminium ions.

The equation for the reaction is as follows:

2Al₍s₎ + 3Cu(NO₃)₂₍aq₎ ⇒ 2Al(NO₃)₃ + 3Cu₍s₎

The ionic equation:

2Al₍s₎ + 3Cu²⁺₍aq₎⇒2Al³⁺₍aq₎ + 3Cu₍s₎

Answer:

copper and aluminum nitrate

Explanation:

Aluminum is more reactive than copper. So, aluminum will replace copper in the nitrate compound, and pure copper will be produced.

Answer:rubidium is the second most reactive metal so it is more reactive than hydrogen

Explanation:

Final answer:

Rubidium is more reactive than hydrogen, especially when reacting with water. It is part of the alkali metals that are highly reactive due to their position in the periodic table, while hydrogen, despite its reactivity, is less reactive with water and forms covalent compounds.

Explanation:

Between rubidium and hydrogen, rubidium is more reactive when it comes into contact with water. This is demonstrated by the vigorous and instantaneous reaction that occurs when rubidium solid is added to water, often resulting in an explosion. This reactivity is due to its position in the periodic table as an alkali metal, which are known for their high reactivity with water. In contrast, hydrogen, although reactive with some elements, has a lower reactivity towards water and forms covalent compounds with various elements.

The chemical equation 2 Rb(s) + 2 H₂O(l) → 2 RbOH(aq) + H₂ (g) depicts this reaction more accurately than a reaction in equilibrium with a low concentration of hydronium ions, as it conveys the fast and vigorous nature of the interaction between rubidium and water. The alkali metals, which include lithium, sodium, potassium, rubidium, cesium, and francium are part of Group 1 of the periodic table and are known for their reactivity, especially with water.

we have

work done (W)= force(F) × displacemen(s)

or, 80= F× 8

or, F= 10 N

therefore, 10 N force is required to lift the rock.

Final answer:

To calculate the force needed to lift a rock 8 m when 80 J of work is done, use the formula W = F × d, resulting in a force requirement of 10 N.

Explanation:

To find out how much force is required to lift a rock a vertical distance of 8 m when 80 J of work were done, we can use the relationship between work done, force, and distance. The work done when lifting an object is defined by the formula W = F × d, where W is the work, F is the force, and d is the distance. In this case, W = 80 J and d = 8 m. By rearranging the formula to solve for F, we get F = W/d. Therefore, the force required to lift the rock is F = 80 J / 8 m = 10 N.

Answer:

Dead fish, birds, dolphins, and many other animals often wind up on beaches, killed by pollutants in their habitat.

Answer:

2KClO₃ → 2KCl + 3O₂. "decomposition reaction"

Explanation:

2KClO₃ → 2KCl + 3O₂.

It is a decomposition reaction that 1.0 reactant is decomposed to 2 products.

That 2.0 mole of KClO₃ are decomposed to produce 2.0 moles of KCl and 3.0 moles of O₂.

K (2), Cl (2), and O (6).

Answer:

a0 = 2

a1= 9

a2= 6

a3= 8

Explanation:

The equation for the reaction is;

C3H7OH + O2 → CO2 + H2O

To balance the chemical equation we introduce coefficients;

Therefore the balanced chemical equation will be;

2C3H7OH + 9O2 → 6CO2 + 8H2O

Chemical equations are balanced to ensure the law of conservation of mass is obeyed, such that the mass of the reactants is equivalent to that of the products.

The problem is a chemistry problem which involves balancing a chemical equation. The given equation (C3H7OH + O2 → CO2 + H2O) can be balanced with coefficients: 1 for C3H7OH, 5 for O2, 3 for CO2, and 4 for H2O resulting in a balanced equation: 1C3H7OH + 5O2 → 3CO2 + 4H2O.

The problem you have presented is a classic chemistry problem involving balancing a chemical equation. In the given equation: a0C3H7OH + a1O2 → a2CO2 + a3H2O, these are the coefficients that will balance the equation: a0 = 1, a1 = 5, a2 = 3 and a3 = 4. This means, the balanced equation would be: 1C3H7OH + 5O2 → 3CO2 + 4H2O. Balancing a chemical equation is a fundamental aspect of stoichiometry in chemistry and is based on the law of conservation of mass.

https://brainly.com/question/7181548

#SPJ3

Answer:

sun

Explanation:

Final answer:

A moon orbits a planet, and a planet orbits the Sun, completing the analogy and indicating 'Sun' is the correct answer to fill in the blank.

Explanation:

The question requires drawing an analogy between celestial bodies based on their relationships within the solar system. A moon orbits a planet, and similarly, a planet orbits something else. The best answer to what a planet orbits is the Sun, which is at the center of our solar system.

We know that all the planets in our solar system, including Earth, revolve around the Sun. This is due to the Sun's gravitational pull, which keeps the planets in their respective orbits. Likewise, moons, including Earth’s moon, orbit their respective planets due to the gravitational pull of these planets.

Therefore, the analogy completes as follows: Moon is to planet as planet is to Sun. The correct choice is B. Sun.

Answer:

3 moles

Explanation:

This question is on stoichiometry of reactions

Given

2H₂ +O₂⇒2H₂O-------------------the equation is balanced

Find the mole ratio

2H₂ +O₂⇒2H₂O

2        1       2

O:H = 2:1---------------------------------every mole of hydrogen requires two moles of oxygen to complety react

Thus given 6 moles of hydrogen;

O:H

?:6

=6/2=3 moles

Answer:

The answer is A

Explanation:

An inherited behavior is a behavior that a creature has from birth.  The baby knows to peck out of the shell before it was even technically born

Answer:

rate = k[A]

Explanation:

The equation that relate reaction rate with reactant concentrations is known as the rate law.

for a reaction:

the rate law can be expressed as:  

The proportionality constant, k, is known as the rate constant, the powers a and b is the reaction order with respect to reactants A and B, respectively.

for this reaction doubling the concentration of A doubles the reaction rate that means

Rate₂ = 2 *Rate₁     and     [A]₂ = 2 [A]₁

Dividing eq. 2 by eq. 1 one can get

using

∴ (2 Rate₁ / Rate₁) = ( k [2]ᵃ[B]ᵇ) / (k[1]ᵃ[B]ᵇ)

∴ order of reaction with respect to A is first (=1)        →     (1)

Doubling the concentration of B does not affect the reaction rate.

that means

Rate₂ = Rate₁     and     [B]₂ = 2 [B]₁

Dividing eq. 2 by eq. 1 one can get

using

∴ (Rate₁ / Rate₁) = ( k [A]ᵃ[2]ᵇ) / (k[A]ᵃ[1]ᵇ)

∴ order of reaction with respect to B is zero         →     (2)

So, from 1 and 2  the right choice is rate = k[A]¹[B]⁰= k[A]

Answer:

11.66 L.

Explanation:

where, P is the pressure of the gas in atm.

V is the volume of the gas in L.

n is the no. of moles of the gas in mol.

R is the general gas constant,

T is the temperature of the gas in K.

(V₁n₂) = (V₂n₁).

V₁ = 25.5 L, n₁ = 3.5 mol.

V₂ = ??? L, n₂ = 3.5 mol - 1.9 mol = 1.6 mol.

∴ V₂ = (V₁n₂)/(n₁) = (25.5 L)(1.6 mol)/(3.5 mol) = 11.66 L.

Hello!

A 25.5 liter balloon holding 3.5 moles of carbon dioxide leaks. If we are able to determine that 1.9 moles of carbon dioxide escaped before the container could be sealed, what is the new volume of the container?​

V1 (initial volume) = 25.5 L

n1 (initial number of moles) = 3.5 mol

V2 (final volume) = ? (in L )

Note: there was a leak in the number of moles, so we have:

n2 (final number of moles) = 3.5 mol - 1.9 mol = 1.6 mol

By Avogadro's Law it is known that the volume is directly proportional to the number of gas particles, that is, the larger the number of moles of gas, the greater its volume, on which we have the following relation:

[tex]\boxed{\dfrac{V_1}{n_1} = \dfrac{V_2}{n_2}}[/tex]

We apply the data to the formula, we have:

[tex]\dfrac{V_1}{n_1} = \dfrac{V_2}{n_2}[/tex]

[tex]\dfrac{25.5}{3.5} = \dfrac{V_2}{1.6}[/tex]

multiply the means by the extremes

[tex]3.5*V_2 = 25.5*1.6[/tex]

[tex]3.5\:V_2 = 40.8[/tex]

[tex]V_2 = \dfrac{40.8}{3.5}[/tex]

[tex]V_2 = 11.657... \to \boxed{\boxed{V_2 \approx 11.66\:L}}\:\:\:\:\:\:\bf\green{\checkmark}[/tex]

Answer:

The new volume of the container is approximately 11.66 liters

________________________

[tex]\bf\blue{I\:Hope\:this\:helps,\:greetings ...\:Dexteright02!}\:\:\ddot{\smile}[/tex]

Answer:

[tex]AlCl_{3}_{(aq)}+H_{2}_{(g)}[/tex]

Aluminum Chloride and Hydrogen Gas

Explanation:

In a chemical equation the reactants are found on the left side of the equation and the products are found on the right side of the equation.

Reactants                 Products

 A + BC           →          AC + B

So in this reaction, AlCl₃ and H₂ are the products.

If we were to name the products, you have Aluminum chloride and Hydrogen gas.

Answer:

1.282 M.

Explanation:

M = (no. of moles of solute) / (V of solution (L))

M = (mass/molar mass)of NaCl / (V of solution (L))

mass of NaCl = 41.2 g, molar mass of NaCl = 58.44 g/mol, V of solution = 550 mL = 0.55 L.

∴ M = (mass/molar mass)of NaCl / (V of solution (L)) = (41.2 g / 58.44 g/mol) / (0.55 L) = 1.282 M.

Answer:

I believe the answer is 0.100.

Explanation:

Hope my answer has helped you!

Final answer:

To find the number of moles in 200 ml of a 0.500 M solution, convert the volume to liters (0.200 L) and multiply by the molarity to get 0.100 moles of solute.

Explanation:

To calculate the number of moles of solute in a 200 ml solution with a molarity of 0.500 M, you would use the formula:

Number of moles (mol) = Molarity (M)× Volume (L)

First, it is critical to convert the volume from milliliters to liters, knowing that there are 1000 ml in a liter:

Next, you would use the given molarity of the solution to determine the moles of solute:

So, the solution contains 0.100 mol of solute.

Diffraction is the bending of a wave around the edges of an opening or obstacle. Examples of diffraction include Young's double-slit experiment, where light passing through two slits produces a diffraction pattern, and waves diffracted off crystal planes according to the Bragg equation, resulting in constructive or destructive interference.

Diffraction is best described as a wave characteristic. It refers to the bending of a wave around the edges of an opening or an obstacle. This phenomenon is observed for all types of waves. When we pass light through smaller openings or slits, for instance, we observe that light behaves as a wave and bends just like sound does in a similar situation.

One example of such an occurrence is Young's double-slit experiment wherein light of a single wavelength passes through a pair of slits. As a result, we observe a diffraction pattern consisting of numerous vertical light and dark lines spreading out exponentially. In simple terms, if there were no diffraction or interference, the light would merely produce two direct lines on the screen.

Another example as illustrated in figure 10.64 is a phenomenon described by the Bragg equation. This refers to waves being diffracted off two different crystal planes at the Bragg angle resulting in constructive interference, or at a different angle causing destructive interference.

https://brainly.com/question/12290582

#SPJ12

Among the given options, the rainbow patterns found on a CD (Option D) are an example of diffraction, demonstrating the interference and bending of light waves as they interact with the grooves on the CD's surface.

Diffraction is a phenomenon related to the bending of waves as they encounter obstacles or pass through small openings. Among the options provided:

A. The blue color of the sky is primarily a result of Rayleigh scattering, not diffraction. Rayleigh scattering occurs when sunlight interacts with molecules and small particles in the Earth's atmosphere, causing shorter wavelengths (like blue) to scatter more than longer wavelengths.

B. The twinkling of the stars is caused by atmospheric turbulence, leading to changes in the refractive index of air. While this phenomenon is related to light passing through varying atmospheric conditions, it is not a direct example of diffraction.

C. The Tyndall effect is the scattering of light by colloidal particles in a transparent medium, making the beam of light visible. This effect is more associated with scattering than diffraction.

D. Rainbow patterns found on a CD are indeed an example of diffraction. The microscopic grooves on the surface of a CD act as a diffraction grating, causing the incident light to diffract into its spectral components, creating the colorful patterns observed.

Learn more about Diffraction here:

https://brainly.com/question/12290582

#SPJ6

The question probable may be:

Which of the following is an example of diffraction  

A.  The blue color of the sky

B. the twinkling of the stars

C. the tyndall effect

D. rainbow patterns found on a CD

Answer:

Cao,NaNo3,Nacl sucrose and cuo

Explanation:

Hygroscopic substances attract water from their surroundings with examples including saltwater, soap, and toothpaste, while deliquescent substances, such as KOH and CaCl₂, can absorb enough water to dissolve. Hygroscopic materials contain bound water, which is tough to remove and can cause shrinkage upon removal.

Hygroscopic substances are those that readily attract and absorb water from their surroundings. Examples include saltwater, soap, toothpaste, bleach, cleaning agents, limewater, and ammonia water. Deliquescent substances are a subset of hygroscopic materials but are so good at absorbing water that they can dissolve in the absorbed water and form a solution. Substances like potassium hydroxide (KOH) and calcium chloride (CaCl₂) are examples of deliquescent materials.

A hygroscopic material consists of all three phases: gas, liquid water, and solid, and it contains bound water, which is strongly bonded to the material and difficult to remove. In contrast to this bound water, free water can be removed through methods such as capillary diffusion and convection flow. When bound water is removed by drying or frying, hygroscopic materials often shrink.

Answer:

D.  Food poisoning, Bacteria Vomiting, loose stools