Based upon the Aggie Honor System Rules and the Academic Integrity statement on the CHEM 111/112/117 syllabus, assess whether the statements are true or false.

Asking for and receiving a paper that someone who is in another lab section wrote is an honor violation.

An oral discussion with a classmate regarding a paper's topics and format is cheating.

Purchasing papers from tutoring companies is allowed.

Sending a paper that you wrote to a student who is currently in another section is an honor violation.

Misconduct in research or scholarship includes fabrication, falsification, or plagiarism in proposing, performing, reviewing, or reporting research. It does not include honest error or honest differences in interpretations or judgements of data.

Discussing an exam or laboratory practical with anyone prior to the conclusion of the week that final exams and laboratory practicals are given would be considered an honor violation.

Answers

Answer 1

Answer:

Asking for and receiving a paper that someone who is in another lab section wrote is an honor violation. True

An oral discussion with a classmate regarding a paper's topics and format is cheating. False

Purchasing papers from tutoring companies is allowed. False

Sending a paper that you wrote to a student who is currently in another section is an honor violation. True

Misconduct in research or scholarship includes fabrication, falsification, or plagiarism in proposing, performing, reviewing, or reporting research. It does not include honest error or honest differences in interpretations or judgements of data. True

Discussing an exam or laboratory practical with anyone prior to the conclusion of the week that final exams and laboratory practicals are given would be considered an honor violation. True

Explanation:

The Aggie code of honour is a code of academic integrity of the Texas A&M University. It spells out the codes of academic integrity and responsible research. Instructors are to include this code in all syllabi. It targets the application of the highest degree of integrity in academic research and forbids misconducts such as cheating, plagiarism, falsification et cetera.

Answer 2
Final answer:

The statements regarding the Aggie Honor System and Academic Integrity rules for CHEM 111/112/117 are generally correct, with exceptions for discussions about paper topics, which is not innately cheating, and purchasing of papers, which is not allowed.

Explanation:

Based on the Aggie Honor System Rules and the Academic Integrity statement on the CHEM 111/112/117 syllabus, the following assessments can be made about the statements:

True: Asking for and receiving a paper that someone who is in another lab section wrote is an honor violation.False: An oral discussion with a classmate regarding a paper's topics and format is not necessarily cheating, unless specific information about the paper is disclosed.False: Purchasing papers from tutoring companies is not allowed under the honor code's stipulations against plagiarism.True: Sending a paper that you wrote to a student who is currently in another section is an honor violation.True: Misconduct in research or scholarship includes fabrication, falsification, or plagiarism in proposing, performing, reviewing, or reporting research. It does not include honest error or honest differences in interpretations or judgements of data.True: Discussing an exam or laboratory practical with anyone prior to the conclusion of the week that final exams and laboratory practicals are given would be considered an honor violation.

Learn more about Academic Integrity here:

https://brainly.com/question/32196816

#SPJ11


Related Questions

Select the correct definition of a glycolipid. A glycolipid is: a lipid molecule that contains a glycerol backbone and three fatty acids a lipid molecule that contains at least one carbohydrate unit a lipid molecule produced during glycolysis a molecule produced during the breakdown of glycogen

Answers

Answer:

a lipid molecule that contains at least one carbohydrate unit

Explanation:

A glycolipid -

It refers to the lipid which consists of the carbohyde group attached via a glycosidic bond , which are basically covalent bonds , is referred to as a glycolipid .

They are present on the surface of the eukaryotic cell membranes .

Glycolipids are important to connect from one tissue to another and facilitate cellular recognition .

Hence , from the given information of the question ,

The correct answer is a lipid molecule that contains at least one carbohydrate unit .

A certain metal M crystallizes in a lattice described by a body-centered cubic (bcc) unit cell. The lattice constant (a, the edge of the unite cell) has been measured by X-ray crystallography to be 360. pm. Calculate the radius of an atom of M. Be sure your answer has 3 significant digits, and be sure it has the correct unit symbol.

Answers

Answer:

radius = 156 pm

Explanation:

The relation between radius and edge length of unit cell of BCC is

r=a[tex]\sqrt{3}[/tex]/4

Given

a = 360 pm

Therefore

r = r = radius = 360[tex]\sqrt{3}[/tex]/4= 155.88 pm

Or

156 pm

Did you notice a difference in the number of times your substrate underwent addition in the two Friedel-Crafts reactions? Why was there a difference or why was there no difference?

Answers

Answer:

a. Yes, there was a difference in the number of times your substrate underwent addition in the two Friedel-Crafts reactions.

b. There was a difference- due to the fact that the  first added alkyl group increaseD the electron density on benzene ring.

Explanation:

Yes, there was a difference in the number of times the substrate underwent addition in the two Friedel-Crafts reactions .

There was a difference - There was an increase in the  rate of second Friedel-Craft reaction due to the fact that the  first added alkyl group increaseD the electron density on benzene ring.

Therefore the rate of the addition reaction increases.

Friedel-Crafts reactions exhibit differences in substrate addition frequency due to the presence of electron-donating alkyl groups, which increase reactivity through polyalkylation, and activating groups that stabilize intermediates and affect reactivity.

The differences in the number of times your substrate underwent addition in the two Friedel-Crafts reactions can be attributed to the nature of the substituents added during the process. In the Friedel-Crafts alkylation, alkyl groups are introduced onto an aromatic ring which are electron-donating substituents. These alkyl groups render the product more reactive than the starting material, leading to the possibility of polyalkylation, where multiple alkyl groups can be added if additional reaction takes place. This is due to the alkyl groups' ability to activate the ring towards further electrophilic attack. Polyalkylation often results in a mixture of products and for synthetic purposes, this could be considered a disadvantage as it complicates purification and affects yield.

On the other hand, the presence of an activating group, such as a methoxy substituent, in Friedel-Crafts alkylation reactions can stabilize the ring carbocation intermediate and increase the rate of reaction, leading to a difference in reactivity compared to reactions without such group. Thus, the control of reactivity and selectivity in Friedel-Crafts reactions is critical and differences in the substrate or reaction conditions can have a significant impact on the outcome of the reaction.

In order to safely run a sample in a centrifuge, it is important to Select one: a. balance the sample with a counterweight of the same mass directly across from it. b. make sure the sample is free from impurities. c. ensure that the sample fills the centrifuge tube completely. d. do all of the given tasks.

Answers

Answer: Option (b) is the correct answer.

Explanation:

A laboratory device which is used to separate fluids, gases or liquid on the basis of their density is known as a centrifuge. When a vessel containing the sample is spins at a high speed then separation takes place as the centrifugal force pushes the heavier material out of the vessel during this process.  

So, if we want the sample to safely run through the centrifuge then it is important that it should be free from impurities.

Thus, we can conclude that in order to safely run a sample in a centrifuge, it is important to make sure the sample is free from impurities.

When the safety run sample should be in a centrifuge so the sample should be free from impurities.

Laboratory device:

It is used to distinguish gases or liquids that depend upon the density is called a centrifuge. At the time When a vessel comprised of the sample should be spinning at a high speed so the separation took place since the centrifugal force pushes the heavier material that should be out of the vessel at the time of the process.  

Learn more about the sample here: https://brainly.com/question/19669595

What is the enthalpy change (in kJ) of a chemical reaction that raises the temperature of 250.0 ml of solution having a density of 1.25 g/ml by 7.80°C? (The specific heat of the solution is 3.74 joules/gramK.) A. -7.43 kJ

Answers

Answer:

328.4KJ

Explanation:

Before we move on to calculate enthalpy change, we calculate the amount of heat Q

Q= mcΔT

m = density * volume = 250 * 1.25 = 312.5g

c = 3.74J/g.k

ΔT = 7.80 + 273.15K = 280.95K

Q= 312.5 * 3.74 * 280.95 = 328,360.312 J= 328.4KJ(1000J = 1KJ, so divide by 1000)

The enthalpy change in the reaction is same as amount of heat transferred = 328.4KJ

Spray drying_______________.a. converts solid foods to semi-solid foods b. atomizes liquids into small solid particles c. increases moisture content d. is similar to fluidized bed drying

Answers

Answer:

b. atomizes liquids into small solid particles

Explanation:

Spray drying -

It refers to the process of getting a dry powder from the liquid or the slurry ,with the help of hot gas , is referred to as spray drying .

The method is used in the field of pharmacy .

It is a type of atomizer or spray nozzle which helps to disperse the liquid into the controlled drop size spray .

Small solid particles are generated by this method .

Hence , from the given scenario of the question ,

The correct answer is b. atomizes liquids into small solid particles  .

For the oxidation–reduction reaction equation 2 Rb + Br 2 ⟶ 2 RbBr 2Rb+Br2⟶2RbBr indicate how many electrons are transferred in the formation of one formula unit of product.

Answers

For the given reaction between rubidium and Boron, only one electron will be transferred in the formation [tex]2 RbBr[/tex].

The potential difference between the two half-cells of an electrochemical cell is known as cell potential. The transfer of electrons from one-half cell to another produces the potential difference.

The given chemical reaction is:

[tex]2Rb_{(s)} + Br_{(l)}[/tex] ⇒ [tex]2RbBr_{(s)}[/tex]

The following electrochemical reaction can be divided into the reaction occurring at the cathode and the reaction occurring at the anode:

Oxidation reaction at the anode: [tex]2Rb_{(s)}[/tex] ⇒ [tex]2Rb^+_{(aq)} + 2e^-[/tex]

Reduction reaction at the cathode: [tex]Br_{2(l)} + 2e^-[/tex] ⇒ [tex]2Br^-_{(aq)}[/tex]

Since there are two units of RbBr in the aforementioned equation and two electrons were transported, only one electron is needed to generate one unit of RbBr.

Thus, only one electron is involved in the formation of RbBr.

Learn more about electrons here:

brainly.com/question/12001116

#SPJ12

Final answer:

In the formation of one formula unit of RbBr, one electron is transferred from rubidium (Rb) to bromine (Br), as Rb loses one electron to form Rb+ and Br gains one electron to form Br-.

Explanation:

The question regards the number of electrons transferred in the formation of one formula unit of RbBr from the reaction 2 Rb + Br2 → 2 RbBr. In order to determine the electron transfer, we need to consider the oxidation states of the elements involved. Rubidium (Rb) is oxidized, meaning it loses electrons, and bromine (Br2) is reduced, meaning it gains electrons.

Rubidium starts with an oxidation state of 0 and becomes Rb+ in RbBr. This indicates that each Rb atom loses one electron. Bromine starts with an oxidation state of 0 as diatomic Br2 and each Br atom gains one electron to become Br- in RbBr. Therefore, for each RbBr formula unit produced, one electron is transferred from Rb to Br.

A chemist prepares a solution of pottasium bromide KBr by measuring out 224.g of pottasium bromide into a 300.mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in mo/L of the chemist's pottasium bromide solution. Round your answer to 3 significant digits.

Answers

Explanation:

Below is an attachment containing the solution.

Answer:

The concentration of the KBr solution is 6.27 mol/L

Explanation:

Step 1: Data given

Mass of KBr = 224 grams

Molar mass KBr = 119.0 g/mol

Volume = 300 mL = 0.300 L

Step 2: Calculate moles KBr

Moles KBr = mass KBr / molar mass KBr

Moles KBr = 224 grams / 119.0 g/mol

Moles KBr = 1.88 moles

Step 3: Calculate concentration KBr solution

Concentration solution = moles KBr / volume

Concentration solution = 1.88 moles / 0.300 L

Concentration solution = 6.27 mol / L

The concentration of the KBr solution is 6.27 mol/L

In a reaction involving the iodination of acetone, the following volumes were used to make up the reaction mixture: 5 mL 4.0M acetone + 5 mL 1.0 M HCl + 5 mL 0.0050 M I2 + 10 mL H2O What was the molarity of acetone in the reaction mixture ? The volume of the mixture was 25 mL, and the number of moles of acetone was found to be 0.020 moles. MA = no. moles A / V of solution in liters

Answers

Explanation:

Below is an attachment containing the solution.

Final answer:

The molarity of acetone in the reaction mixture is 0.8 M.

Explanation:

To find the molarity of acetone in the reaction mixture, we need to use the molarity formula: Molarity (M) = Number of moles (n) / Volume of solution (V) in liters. Given that the number of moles of acetone is 0.020 and the volume of the mixture is 25 mL (0.025 L), we can substitute these values into the formula to find the molarity of acetone:

Molarity of acetone (MA) = 0.020 moles / 0.025 L = 0.8 M

At the end of the isomerization reaction, what chemical is used to quench the residual bromine?At the end of the isomerization reaction, what chemical is used to quench the residual bromine?

Answers

Answer: Cyclohexene

Explanation:

Cyclohexane belongs to the Alkenes family. Alkenes react in the cold with pure liquid bromine, or with a solution of bromine in an organic solvent like tetrachloromethane. The double bond breaks, and a bromine atom get attached to each carbon. The bromine loses its original red-brown color to give a colorless liquid. In the case of the reaction with ethene, 1,2-dibromoethane is formed. When bromine is added to cyclohexane in the dark room, there won't be any reaction. If the mixture is exposed to light however, free bromine radicals are generated. In this condition, polybrominated products can be produced as well.

Final answer:

The chemical used to quench the residual bromine at the end of the isomerization reaction is usually an organic compound containing a reducing agent, such as sodium bisulfite (NaHSO3) or sodium hydrogen sulfite (NaHSO3).

Explanation:

The chemical used to quench the residual bromine at the end of the isomerization reaction is usually an organic compound containing a reducing agent, such as sodium bisulfite (NaHSO3) or sodium hydrogen sulfite (NaHSO3). These compounds react with bromine to form non-toxic salts that can be easily removed. For example, NaHSO3 reacts with bromine to form sodium bromide (NaBr) and sodium sulfate (Na2SO4). This reaction effectively removes the residual bromine and prevents it from causing further reactions or harming the desired product.

Learn more about isomerization reaction here:

https://brainly.com/question/30897046

#SPJ12

Explain in detail the differences & similarities between Fission & Fusion

Answers

Fusion and Fission both are nuclear reactions where the major difference between them is Fusion is combining process whereas fission is a breaking process.

Explanation:

Similarity:

Both Fission and Fusion are nuclear reactions that releases vast amount of energy.

Difference:

Fission is the splitting of heavier nucleus into lighter nuclei which generates maximum amount of energy whereas fusion is the combining 2 lighter nuclei to form a heavier nucleus and makes a vast energy. The energy generated by fission reaction in these reactors heats up the water into steam. This steam is utilized to rotate a turbine to generate carbon-free electricity.  Fusion reactions are difficult to retain for longer period of time since it needs tremendous amount of temperature and pressure to combine the nuclei together.

An open tubular gas chromatography column is 35.7 m long and has an inner diameter of 0.250 mm. It is coated on the inside wall with a layer of stationary phase that is 1.8 µm (0.0018 mm) thick. Unretained solute, methane, passes through in 6.39 min, whereas toluene has a retention time of 16.35 min. Calculate the retention factor for toluene.

Answers

Answer:

The retention factor, k is 2.49

Explanation:

According to the theory of High-Performance Liquid Chromatography (HPLC), the retention factor (or capacity), k, of a column is the ratio of the retention time of a retained analyte (toluene) to that of the  un-retained solute (methane).

This implies that:

k = [tex]\frac{16.35 (mins)}{ 6.39 (mins)}[/tex]  =  [tex]\frac{995 (secs)}{399 (secs)}[/tex]

 retention factor, k  = 2.49.

Note that there is no unit for retention factor, as it is a ratio.

Final answer:

The retention factor for toluene in the given gas chromatography system, calculated using the retention times of toluene and methane, is approximately 1.56.

Explanation:

The question involves calculating the retention factor (k) for toluene using gas chromatography (GC) data. The retention time is the time a compound spends in the column before being detected, which varies by compound owing to differences in interaction with the stationary phase. The retention factor is a measure of this time relative to an unretained solute, providing insight into the compound's affinity for the stationary phase versus the mobile phase.

To calculate the retention factor (k) for toluene, we use the formula: k = (t-R - t-M) / tM, where tR is the retention time of the analyte (toluene) and tM is the retention time of an unretained solute (methane, in this case). For toluene, t-R = 16.35 min, and for methane, t-M = 6.39 min. Substituting these values into the equation, we find k for toluene as follows: k = (16.35 - 6.39) / 6.39 = 9.96 / 6.39 ≈ 1.56.

Given the reactions below, (1) Na(s) + H2O(l) → NaOH(s) + 1/2 H2(g) LaTeX: \Delta H^o_{rxn}Δ H r x n o = −146 kJ (2) Na2SO4(s) + H2O(l) → 2NaOH(s) + SO3(g) LaTeX: \Delta H^o_{rxn}Δ H r x n o = 418 kJ (3) 2Na2O(s) + 2H2(g) → 4Na(s) + 2H2O(l) LaTeX: \Delta H^o_{rxn}Δ H r x n o = 259 kJ Determine LaTeX: \Delta H^o_{rxn}Δ H r x n o for the following reaction: (4) Na2O(s) + SO3(g) → Na2SO4(s) LaTeX: \Delta H^o_{rxn}Δ H r x n o = ?

Answers

Answer:

   ΔrxnH  = -580.5 kJ

Explanation:

To solve this question we are going to help ourselves with Hess´s law.

Basically the strategy here is to work  in an algebraic way with the three first reactions so as to reprduce the desired equation when we add them together, paying particular attention to place the reactants and products in the order that they are in the desired equation.

Notice that in the 3rd reaction we have 2 mol Na₂O (s) which is a reactant but with a coefficient of one, so we will multiply this equation by 1/2-

The 2nd equation has Na₂SO₄ as a reactant and it is a product in our required equation, therefore we will reverse the 2nd . Note the coefficient is 1 so we do not need to multiply.

This leads to the first equation and since we need to cancel 2 NaOH, we will nedd to multiply by 2 the first one.

Taking  1/2 eq 3 + (-) eq 2 + 2 eq 1 should do it.

      Na₂O (s) + H₂ (g) ⇒ 2 Na (s) + H₂O(l)             ΔrxnHº = 259 / 2 kJ  1/2 eq3

+    2NaOH(s)  + SO₃(g) ⇒  Na₂SO₄ (s) + H₂O (l)   ΔrxnHº = -418 kJ     - eq 2

+    2Na (s) + 2 H₂O (l)  ⇒   2 NaOH (s) + H₂ (g)    ΔrxnHº = -146 x 2    2 eq 1

                                                                                                                                       

Na₂O (s) + SO₃ (g)  ⇒ Na₂SO₄ (s)    ΔrxnHº =  259/2 + (-418) + (-146) x 2 kJ

                                                          ΔrxnH  = -580.5 kJ

Final answer:

To find the enthalpy change for the reaction Na2O(s) + SO3(g) → Na2SO4(s), we apply Hess's Law and manipulate the given reactions to find that the enthalpy change is -288.5 kJ.

Explanation:

To determine the enthalpy change (\(\Delta H^o_{rxn}\)) for the reaction (4) Na2O(s) + SO3(g) → Na2SO4(s), we use Hess's Law which states that if a reaction is the sum of two or more other reactions, the enthalpy changes of the constituent reactions can be added to determine the enthalpy change of the overall process. We need to find a combination of reactions (1), (2), and (3) that will result in reaction (4).

Here are the given reactions with their enthalpy changes:

Na(s) + H2O(l) → NaOH(s) + 1/2 H2(g), \(\Delta H^o_{rxn} = -146 kJ\)

Na2SO4(s) + H2O(l) → 2NaOH(s) + SO3(g), \(\Delta H^o_{rxn} = +418 kJ\)

2Na2O(s) + 2H2(g) → 4Na(s) + 2H2O(l), \(\Delta H^o_{rxn} = +259 kJ\)

To solve for the enthalpy of reaction (4), we need to reverse reaction (2) and halve reaction (3) to cancel out unwanted substances and leave Na2O(s) + SO3(g) on the left-hand side and Na2SO4(s) on the right-hand side.

Reversed reaction (2):\[\text{Na2SO4(s) + H2O(l) → 2NaOH(s) + SO3(g)}\], \(\Delta H^o_{rxn} = -418 kJ\) (since we reversed it)

Halved reaction (3):\[\text{Na2O(s) + H2(g) → 2Na(s) + H2O(l)}\], \(\Delta H^o_{rxn} = +259 kJ / 2 = +129.5 kJ\) (since we halved it)

Finally, we add the modified reaction (2) and (3):

(4) Na2O(s) + SO3(g) → Na2SO4(s), the enthalpy change is \(\Delta H^o_{rxn} = (-418 kJ) + (+129.5 kJ) = -288.5 kJ\).

You want to determine the protein content in milk with the Kjeldahl method. You take 100 g whole milk and use 100 mL of 0.5 M hydrochloric acid to collect ammonia. You needed 34.50 mL of 0.3512 M NaOH for the back-titration. Calculate the percentage of protein in the sample?

Answers

Answer:

82.53 % protein in the milk.

Explanation:

Titration formula:

Conc (acid) × Vol (acid) = Conc (base) × Vol (base)

Beginning from back-titration:

0.5 M HCl × Vol  (HCl) = 0.3512 (conc of NaOH) × 34.50 mL (vol of NaOH)

=  [tex]\frac{12.1164}{0.5}[/tex] = 24.2328 mL

Vol of HCl used in initial titration is 24.2328 mL

So from Initial Titration:

Using same titration formula,

0.5 × 24.2328 = Conc. (base) × 100 ml

Conc (base) = 12.1164 ÷ 100

= 0.121164 M.

But concentration = mass ÷ molar mass

0.121164 = [tex]\frac{100 g}{ molar mass}[/tex]

= 825.3277 g/mol of protein

⇒ [tex]\frac{825.32765}{1000}[/tex] × 100

= 82.53 % protein in the milk.

Compare the system (still at 50 °C) with a volume of 1.0 L and with 3.0 L. What is the total amount of gas (mol) present in the container at each of these volumes?

Answers

Final answer:

At a constant temperature of 50 °C, a volume of 1.0 L would contain approximately 0.045 moles of gas, whereas a volume of 3.0 L would contain approximately 0.134 moles of gas. These values are based on the standard molar volume of 22.4 L/mol at Standard Temperature and Pressure (STP).

Explanation:

In order to make this comparison, we can use Avogadro's Law which states that equal volumes of gases, at the same temperature and pressure, will contain an equal number of molecules or moles. We would also use the standard molar volume of an ideal gas at Standard Temperature and Pressure (STP), which is about 22.4 L/mol.

Given that our system's temperature is constant at 50 °C and comparing volumes of 1.0 L and 3.0 L, we simply calculate the number of moles in each volume. For 1.0 L, if we stay consistent with molar volume at STP, it equates to about 0.045 moles of gas (1 L / 22.4 L per mole). For 3.0 L, it would equate to about 0.134 moles of gas (3 L / 22.4 L per mole).

Please note that this approximation is based on the standard molar volume at STP, and accuracy may vary at temperatures significantly different from STP (such as 50 °C).

Learn more about Gas mole calculations here:

https://brainly.com/question/18470626

#SPJ12

how many aluminum atoms are in 3.78g of aluminum?

Answers

Answer:

The molar mass of aluminum is 26.9 grams per mole. We start by converting the grams of aluminum to moles of aluminum.

m

o

l

 

A

l

 

=

 

3.78

 

g

 

A

l

×

1

 

m

o

l

 

A

l

26.9

 

g

 

=

 

0.1405

 

m

o

l

 

A

l

We use Avogadro's number to determine the number of aluminum atoms present in 0.1405 mol Al.

A

t

o

m

s

 

A

l

 

=

 

0.1405

 

m

o

l

 

A

l

×

6.022

×

10

23

1

 

m

o

l

 

A

l

 

=

 

8.46

×

10

22

 

a

t

o

m

s

 

A

l

Answer:

0.846×10²³

Explanation:

molar mass of aluminum is 26.9 g/mol.  

converting the grams of aluminum to moles of aluminum.

mol Al = 3.78 g ×1 mol Al÷26.9 g = 0.1405 mol of Al

to determine the number of aluminum atoms present in 0.1405 mol Al we use the Avogrado's number which is equal to 6.022×10²³

Atoms of  Al = 0.1405 mol Al×6.022×10²³

= 0.846×10²³

I hope this was helpful, please mark as brainliest

A hydrogen atom in an excited state can be ionized with less energy than when it is in its ground state. What is n for a hydrogen atom if 0.544 eV of energy can ionize it?

Answers

Explanation:

It is known that formula for the ionization energy of hydrogen atom is as follows.

               E = [tex]\frac{13.6 eV}{n^{2}}[/tex]

or,          n = [tex]\sqrt{\frac{13.6}{E}}[/tex]

The value of energy is given as 0.544 eV. Therefore, we will calculate the value of n as follows.

                   n = [tex]\sqrt{\frac{13.6}{E}}[/tex]

                      = [tex]\sqrt{\frac{13.6}{0.544 eV}}[/tex]

                      = 5

Thus, we can conclude that n equals to 5 for a hydrogen atom if 0.544 eV of energy can ionize it.

Final answer:

The principal quantum number n of a hydrogen atom that requires 0.850 eV of energy to ionize from an excited state is 4. This is calculated using the formula for the energy levels of hydrogen, En = -13.6 eV/n², and solving for n.

Explanation:

The question relates to the energy levels of a hydrogen atom and how much energy is required to ionize it when the electron is in an excited state. The ionization energy of hydrogen in the ground state (n = 1) is 13.6 eV. To find the principal quantum number n for a particular amount of energy required to ionize the hydrogen atom from an excited state, we use the formula: En = -13.6 eV/n². We can set this equal to the energy needed to ionize the atom, in this case, 0.850 eV, and solve for n.

First, we rearrange the formula so it looks like this:

-13.6 eV/n² = -0.850 eV
Then we solve for n:

n² = 13.6 eV / 0.850 eV
n² = 16
n = √16
n = 4

Thus, the hydrogen atom is in the n = 4 excited state when 0.850 eV of energy can ionize it.

A sample of 9.49 g of solid calcium hydroxide is added to 30.0 mL of 0.490 M aqueous hydrochloric acid. Write the balanced chemical equation for the reaction. Physical states are optional.

Answers

Answer:

Ca(OH)2(s) + 2HCl(aq) →  CaCl2(aq) + 2H2O(l)

Explanation:

Step 1: Data given

Mass of Ca(OH)2 = 9.49 grams

Volume of a 0.490 M HCl solution = 30.0 mL = 0.030 L

Step 2: The unbalanced equation

Ca(OH)2 + HCl →  CaCl2 + H2O

On the left side we have 2x O (in Ca(OH)2 )  and on the right side we have 1x O (in H2O). To balance the amount of O we have to multiply H2O, on the right side , by 2.

Ca(OH)2 + HCl →  CaCl2 + 2H2O

On the right side we have 4x H (in 2H2O), and on the left side we have 3x H  (2x in Ca(OH)2 and 1x in HCl). To multiply the amount of H, we have to multiply HCl on the left side by 2.

Ca(OH)2(s) + 2HCl(aq) →  CaCl2(aq) + 2H2O(l)

High-density polyethylene may be chlorinated by inducing the random substitution of chlorine atoms for hydrogen. Determine the concentration of Cl (in wt%) that must be added if this substitution occurs for 6% of all the original hydrogen atoms.

Answers

Explanation:

Let us assume that 50 carbon atoms are available with possible 100 site bondings. It is given here that 94% are occupied by hydrogen (94 out of 100) and 6% (6 out of 100) are occupied by chlorine atom.

Therefore, moles of carbon = 50

                  moles of hydrogen = 94

                  moles of chlorine = 6

Therefore,

  Mass of 50 carbon atoms = [tex]50 \times 12.01 g/mol[/tex] = 600.5 g/mol

  Mass of 94 hydrogen atoms = [tex]94 \times 1.008 g/mol[/tex] = 94.752 g/mol

  Mass of 6 chlorine atoms = [tex]6 \times 35.45 g/mol[/tex] = 212.7 g/mol

Therefore, concentration of chlorine is as follows.

              [tex]C_{cl} = \frac{m_{cl}}{m_{c} + m_{H} + m_{cl}}[/tex]

                         = [tex]\frac{212.7}{907.952} \times 100[/tex]

                         = 23.42%

thus, we can conclude that the concentration of Cl is 23.42%.

Final answer:

The calculation of Chlorine concentration in high-density polyethylene after 6% Hydrogen replacement involves determining the increased mass from Chlorine substitution, considering the significant difference in atomic masses of Hydrogen and Chlorine. Chlorine's contribution to the weight of the new compound would be considerable.

Explanation:

High-density polyethylene has a chemical formula of (C2H4)n, where 'n' denotes the number of repeating units in the polymer chain. Each molecule of ethylene contributes two hydrogen atoms. Therefore, if we assume 6% of all hydrogen atoms are replaced by chlorine atoms, we have to add the weight of chlorine into the composition.

Under normal conditions, Chlorine (Cl) has an atomic weight of approximately 35.45 g/mol, and Hydrogen (H) has an atomic weight of approximately 1.008 g/mol. Therefore, the introduction of Chlorine substitutes a weight of 35.45 g for every 1.008 g of Hydrogen.

To calculate the weight percent of Chlorine in the composition, we determine the total weight contributed by chlorine and divide it by the total weight of the new compound, then multiply by 100%. As a result, the weight percentage of Chlorine when 6% of hydrogen atoms are replaced, following the calculations and the Principle of Atomic Substitution, is quite significant due to the considerable difference in atomic weights of Chlorine and Hydrogen.

Learn more about Atomic Substitution here:

https://brainly.com/question/15001687

#SPJ3

The Fischer esterification mechanism is examined in the following two questions in the assignment. Part 1 involves MeOH addition to form the key tetrahedral intermediate. Part 2 will involve loss of H2O to form the ester. Part 1 of 2:

Answers

Final answer:

The Fischer esterification mechanism involves two main steps: the addition of methanol (MeOH) to a carboxylic acid to form a tetrahedral intermediate, and the loss of water (H2O) to create the ester.

Explanation:

The Fourier esterification is a fundamental mechanism in Chemistry and encompasses two main steps. Part 1 involves the Addition of Methanol (MeOH) to a carboxylic acid to form a tetrahedral intermediate. Here, the lone pair of electrons on the oxygen of the MeOH attacks the carbonyl carbon of the acid, pushing the electrons up onto the carbonyl oxygen and forming the tetrahedral intermediate. Part 2 is the Loss of water (H2O) to create the ester. The hydroxyl group of the intermediate acts as a leaving group, departing as a water molecule. The lone pair of electrons on the oxygen then comes back down and forms the pi bond, hence forming the ester.

Learn more about Fischer esterification here:

https://brainly.com/question/33904204

#SPJ6

Final answer:

In the Fischer esterification mechanism, a carboxylic acid and an alcohol react, leading to the formation of an ester and water. It's called a 'key tetrahedral intermediate' and the process involves the loss of a water molecule.

Explanation:

The Fischer esterification mechanism is a fundamental process in organic chemistry that involves the transformation of a carboxylic acid and an alcohol into an ester. This process is initiated by the addition of an alcohol, such as MeOH (methanol), to the carboxylic acid via a nucleophilic attack, forming a tetrahedral intermediate.

The carboxylic acid group of this intermediate subsequently loses a water molecule (H2O) in a dehydration process, resulting in the formation of the desired ester.

For example, when ethanol reacts with acetic acid (ethanoic acid), the ester known as ethyl acetate (methyl ethanoate) is produced. Notably, esters are recognized for their fragrant odors, deriving from various plants and their fruits, such as honey methyl phenylacetate.

Learn more about Fischer esterification mechanism here:

https://brainly.com/question/33904204

#SPJ6

Cyclohexane (C6H12) is a hydrocarbon (a substance containing only carbon and hydrogen) liquid. Which of the following will most likely dissolve in cyclohexane to form a solution?

a) NaBr
b) CH2Cl2
c) CH3CH2CH2CH2CH3
d) HI

Answers

Answer: Option (c) is the correct answer.

Explanation:

It is known that like dissolves like. As cyclohexane is a hydrocarbon and we know that hydrocarbons are non-polar in nature. So, a non-polar compound will be soluble in a hydrocarbon.

For example, NaBr is an ionic compound and when it i added to liquid cyclohexane then it will not dissolve. Similarly, [tex]CH_{2}Cl_{2}[/tex] and HI are polar covalent compounds and they will not dissolve in liquid cyclohexane.

But [tex]CH_3CH_2CH_2CH_2CH_3[/tex] is a non-polar compound. So, when it is added to liquid cyclohexane then it will readily dissolve.

Thus, we can conclude that pentane ([tex]CH_3CH_2CH_2CH_2CH_3[/tex]) will most likely dissolve in cyclohexane to form a solution.

Mirex(MW = 540) is a fully chlorinated organic pesticide that was manufactured to control fire ants. Due to its structure, mirex is very unreactive; thus, it persists in the environment. Lake Erie water samples have had mirex measured as high as 0.002 μg/L and lake trout samples with 0.002 μg/g. (a) (10 points) In the water samples, what is the aqueous concentration of mirex in units of (i) ppb, (ii) ppt, (iii) μM? (b) (10 points) In the fish samples, what is the concentration of mirex in (i) ppm, (ii) pp

Answers

Answer:

A) i) 0.002 ppb (ii) 2ppt (iii) 3.7 x 10^(-6) μM

B) i)0.002 ppm. (ii) 2ppb

Explanation:

A) We know that 1 ppb = 1 μgram per liter, and so the concentration of Mirex in ppb would be 0.002 ppb.

1 ppt = 1 nanogram per liter of water, so the concentration of Mirex in ppt would be 2 ppt;

(0.002 μg/L) (100ng/μg) (1ppt/ng/L) = 2ppt.

Now, MW of Mirex = 540 g/mol ≡ μg/μmol

Thus, 1 μmole = 540 μgram,

Hence, the concentration of Mirex in μmoles would be;

(0.002 μg/L)/(540 μg/μmol) = 3.7 x 10^(-6) μM

B) i) 1 ppm = 1 μgram per gram.

Thus, the concentration of Mirex in ppm would be = 0.002 ppm.

ii) Now, 1 ppb = 1 nanogram per gram.

Thus, concentration of Mirex in ppb would be = (0.002 μg/g) (100ng/μg) (1ppb ng/g) = 2ppb

Final answer:

The concentration of mirex in water samples is 0.002 ppb, 2 ppt, and approximately 3.70 x 10⁻³ μM. In fish samples, the concentration of mirex is 0.002 ppm and 2 ppb.

Explanation:

The student is asking about converting the concentration of a pesticide, mirex, in water and fish samples to various units. The concentration in water samples is given as 0.002 μg/L. The conversions are as follows:

Parts per billion (ppb) is equivalent to micrograms per liter (μg/L), so the concentration is 0.002 ppb.To convert to parts per trillion (ppt), we multiply the ppb value by 1,000. Thus, the concentration is 2 ppt.The concentration in micromolar (μM) can be found by dividing the microgram concentration by the molecular weight of mirex and then dividing by the volume of the solution in liters. Since the molecular weight (MW) of mirex is 540 g/mol, the calculation is 0.002 μg/L × (1 mg/1,000 μg) × (1 mol/540,000 mg) × (1,000,000 μM/1 M), resulting in approximately 3.70 x 10⁻³ μM.

For the fish samples:

The concentration as parts per million (ppm) is the same as micrograms per gram (ug/g), so it is 0.002 ppm.The parts per billion (ppb) value is 0.002 ppb, as 1 ppm is equal to 1,000 ppb, and the value for mirex in fish is already less than 1 ppm.

In the Haber reaction, patented by German chemist Fritz Haber in 1908, dinitrogen gas combines with dihydrogen gas to produce gaseous ammonia. This reaction is now the first step taken to make most of the world's fertilizer. Suppose a chemical engineer studying a new catalyst for the Haber reaction finds that liters per second of dinitrogen are consumed when the reaction is run at and. Calculate the rate at which ammonia is being produced.

Answers

The question is incomplete, complete question is :

In the Haber reaction, patented by German chemist Fritz Haber in 1908, dinitrogen gas combines with dihydrogen gas to produce gaseous ammonia. This reaction is now the first step taken to make most of the world's fertilizer. Suppose a chemical engineer studying a new catalyst for the Haber reaction finds that 348 liters per second of dinitrogen are consumed when the reaction is run at 205°C and 0.72 atm. Calculate the rate at which ammonia is being produced.

Answer:

The rate of production of ammonia is 217.08 grams per second.

Explanation:

[tex]N_2+3H_2\rightarrow 2NH_3[/tex]

Volume of dinitrogen used in a second = 348 L

Temperature of the gas = T = 205°C = 205+273 K = 478 K

Pressure of the gas = P = 0.72 atm

Moles of dinitrogen = n

[tex]n=\frac{PV}{RT}=\frac{0.72 atm\times 348 L}{0.0821 atm L/mol K\times 478 K}=6.385 mol[/tex]

According to reaction, 1 mole of dinitriogen gives 2 mole of ammonia.Then 6.385 moles of dinitrogen will give:

[tex]\frac{2}{1}\times 6.385 mol=12.769 mol[/tex]

Mass of 12.769 moles of ammonia;

12.769 mol 17 g/mol = 217.08 g

217.08 grams of ammonia is produced per second.So, the rate of production of ammonia is 217.08 grams per second.

How much heat is required to vaporize 31.5 gg of acetone (C3H6O)(C3H6O) at 25 ∘C∘C? The heat of vaporization for acetone at this temperature is 31.0 kJ/molkJ/mol.

Answers

Answer:

≅ 16.81 kJ

Explanation:

Given that;

mass of acetone = 31.5 g

molar mass of acetone = 58.08 g/mol

heat of vaporization for acetone = 31.0 kJ/molkJ/mol.

Number of moles = [tex]\frac{mass}{molar mass}[/tex]

Number of moles of acetone = [tex]\frac{31.5}{58.08}[/tex]

Number of moles  of acetone = 0.5424 mole

The heat required to vaporize 31.5 g of acetone can be determined by multiplying the number of moles of acetone with the heat of vaporization of acetone;

Hence;

The heat required to vaporize 31.5 g of acetone = 0.5424 mole × 31.0 kJ/mol

The heat required to vaporize 31.5 g of acetone = 16.8144 kJ

≅ 16.81 kJ

A magnesium hydroxide solution is prepared by adding 10.00 g of magnesium hydroxide to a volumetric flask and bringing the final volume to 1.00 L by adding water buffered at a pH of 7.0. What is the concen- tration of magnesium in this solution? (Assume that the temperature is 25◦C and the ionic strength is negligible).

Answers

Answer:

0.1724 M is the concentration of magnesium ions in this solution.

Explanation:

Mass of magnesium hydroxide gas = 10.00 g

Molar mass of magnesium hydroxide = 58 g/mol

Moles of magnesium hydroxide = [tex]\frac{10.00 g}{58 g/mol}=0.1724 mol[/tex]

Volume of the solution = V = 1.00 L

Molarity or concentration of the magnesium hydroxide:M

[tex]M=\frac{\text{Moles of solute}}{\text{Volume of solution in L}}[/tex]

[tex]M=\frac{0.1724 mol}{1.00 L}=0.1724 M[/tex]

1 mole of magnesium hydroxide contains 1 mole of magnesium ion.Then 0.1724 M of magnesium hydroxide will have :

[tex][Mg^{2+}]=1\times 0.1724 M=0.1724 M[/tex]

0.1724 M is the concentration of magnesium ions in this solution.

Final answer:

The concentration of magnesium hydroxide in the solution is 0.1714 Molar. This is calculated by dividing the number of moles of magnesium hydroxide by the volume of the solution in the volumetric flask.

Explanation:

The subject of this question falls under Chemistry, and it's asking about calculating concentration, specifically for a solution of magnesium hydroxide. In chemistry, concentration is commonly expressed in moles per liter (M). It's necessary to convert the mass of magnesium hydroxide to moles by using its molar mass.

First, to solve this question, we need to know the molar mass of magnesium hydroxide (Mg(OH)2), which is about 58.3197 grams/mole. Dividing the given mass of magnesium hydroxide (10.00g) by the molar mass gives us the number of moles. Thus, 10.00 g / 58.3197 g/mol ≈ 0.1714 mol of Mg(OH)2.

The whole solution was made up in a 1.00 L volumetric flask. Concentration is defined as the amount of solute per unit volume of solvent. Hence, the concentration of Mg(OH)2 is 0.1714 mol / 1.00 L = 0.1714 M (molar).

On note, the temperature given in the question (25◦C) does not affect the calculation of the concentration in this case, nor does the pH of the water used.

Learn more about Concentration of Solution here:

https://brainly.com/question/32147692

#SPJ11

What volumes of 0.200 M HCOOH and 2.00 M NaOH would make 500. mL of a buffer with the same pH as a buffer made from 475 mL of 0.200 M benzoic acid and 25 mL of 2.00 M NaOH? Look up Ka values on the formula sheet.

Answers

Explanation:

The given data is as follows.

      [HCOOH] = 0.2 M,       [NaOH] = 2.0 M,

         V = 500 ml,   [Benzoic acid] = 0.2 M

First, we will calculate the number of moles of benzoic acid as follows.

   No. of moles of benzoic acid = Molarity × Volume

                         = [tex]2 \times 0.475[/tex]

                         = 0.095 mol

And, moles of NaOH present in the solution will be as follows.

    No. of moles of NaOH = Molarity × Volume

                          = [tex]2 \times 0.025[/tex]

                          = 0.05 mol

Hence, the ICE table for the chemical equation will be as follows.

         [tex]C_{6}H_{5}COOH + NaOH \rightarrow C_{6}H_{5}COONa + H_{2}O[/tex]

Initial:        0.095           0.05            0             0

Equlbm:  (0.095 - 0.05)  0            0.05

        pH = [tex]pK_{a} + log \frac{Base}{Acid}[/tex]  

              = [tex]4.2 + log \frac{0.05}{0.045}[/tex]

              = 4.245

For,  

         [tex]HCOOH + NaOH \rightarrow HCOONa + H_{2}O[/tex]

Initial:       0.2x     2(0.5 - x)               0

Equlbm:   0.2x - 2(0.5 - x)                 0             2(0.5 - x)

As,

           pH = [tex]pK_{a} + log \frac{Base}{Acid}[/tex]  

          4.245 = 3.75 + [tex]log \frac{Base}{Acid}[/tex]

      [tex]log \frac{Base}{Acid}[/tex] = 0.5

    [tex]\frac{Base}{Acid}[/tex] = 3.162

Now,

        [tex]\frac{2(0.5 - x)}{0.2x - 2(0.5 - x)}[/tex] = 3.162

               x = 0.464 L

Volume of NaOH = (0.5 - 0.464) L

                             = 0.036 L

                             = 36 ml               (as 1 L = 1000 mL)

And, volume of formic acid is 464 mL.

                 

36 ml of NaOh and 464 ml of HCOOH would be enough to form 500 ml of a buffer with the same pH as the buffer made with benzoic acid and NaOH.

We can arrive at this answer through the following calculation:

Calculate the amount of moles in NaOH and benzoic acid. This calculation is done by multiplying molarity by volume.

Amount of moles of NaOH: [tex]2 * 0.025 = 0.05 mol[/tex]

Amount of moles of benzoic acid: [tex]2*0.475=0.095mol[/tex]

In this case, we can calculate the pH produced by the buffer of these two reagents, as follows:

[tex]pH=pK{a}+log\frac{base}{acid}[/tex]

[tex]4.2+log\frac{0.05}{0.045}=4.245[/tex]

We must repeat this calculation, with the values shown for HCOOH and NaOH. In this case, we can calculate as follows:

[tex]pH=pK{a} +log\frac{base}{acid} \\4.245=3.75+log\frac{base}{acid} \\log\frac{base}{acid}=0.5\\\frac{base}{acid} = 3.162[/tex]

Now we must solve the equation above. This will be done using the following values:

[tex]\frac{2(0.5-x)}{0.2x-2(0.5-x)} =0.464L[/tex]

With these values, we can calculate the volumes of NaOH and HCOOH needed to make the buffer.

NaOH volume:

[tex](0.5-0.464) L\\0.036L ----- 36mL[/tex]

HCOOH volume:

[tex]500 mL-36mL = 464 mL[/tex]

More information:

https://brainly.com/question/10695579?referrer=searchResults

A breeder nuclear reactor is a reactor in which nonfissile U-238 is converted into fissile Pu-239. The process involves bombardment of U-238 by neutrons to form U-239 which then undergoes two sequential beta decays. Write nuclear equations to represent this process.

Answers

Answer: The nuclear equations for the given process is written below.

Explanation:

The chemical equation for the bombardment of neutron to U-238 isotope follows:

[tex]_{92}^{238}\textrm{U}+n\rightarrow _{92}^{239}\textrm{U}[/tex]

Beta decay is defined as the process in which neutrons get converted into an electron and a proton. The released electron is known as the beta particle.

[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^A\textrm{Y}+_{-1}^0\beta[/tex]

The chemical equation for the first beta decay process of [tex]_{92}^{239}\textrm{U}[/tex] follows:

[tex]_{92}^{239}\textrm{U}\rightarrow _{93}^{239}\textrm{Np}+_{-1}^0\beta[/tex]

The chemical equation for the second beta decay process of [tex]_{93}^{239}\textrm{Np}[/tex] follows:

[tex]_{93}^{239}\textrm{Np}\rightarrow _{94}^{239}\textrm{Pu}+_{-1}^0\beta[/tex]

Hence, the nuclear equations for the given process is written above.

Calculate the value of K p for the equation C ( s ) + CO 2 ( g ) − ⇀ ↽ − 2 CO ( g ) K p = ? given that at a certain temperature C ( s ) + 2 H 2 O ( g ) − ⇀ ↽ − CO 2 ( g ) + 2 H 2 ( g ) K p 1 = 3.23 H 2 ( g ) + CO 2 ( g ) − ⇀ ↽ − H 2 O ( g ) + CO ( g ) K p 2 = 0.693

Answers

Answer:

kp  = 1.55

Explanation:

To get to this reaction, we just need to sum the other two reactions, and multiply coefficients if it's needed so:

C(s) + 2H₂O(g) ⇄CO₂(g) + 2H₂(g)   Kp1 = 3.23    (1)

H₂(g) + CO₂(g) ⇄ H₂O(g) + CO(g)    Kp2 = 0.601   (2)

we will multiply eqn 2 by 2 because we need to eliminate H₂

2H2(g) + 2CO2(g) ⇄ 2H2O(g) + 2CO(g)    Kp = (0.601)²

Now, add both equation

C(s) + 2H₂O(g) ⇄CO₂(g) + 2H₂(g)   Kp1 = 3.23  

2H2(g) + 2CO2(g) ⇄ 2H2O(g) + 2CO(g)    Kp = (0.601)²

we have,

C(s) + CO₂(g) ⇄ 2CO(g)  

Now the value of Kp will be:

kp = 3.23 × (0.693)²

kp  = 1.55

Biphenyl, C 12 H 10 , C12H10, is a nonvolatile, nonionizing solute that is soluble in benzene, C 6 H 6 . C6H6. At 25 ∘ C, 25 ∘C, the vapor pressure of pure benzene is 100.84 Torr. What is the vapor pressure of a solution made from dissolving 10.3 g 10.3 g of biphenyl in 27.8 g 27.8 g of benzene?

Answers

Answer:

Vapor pressure of solution is 98.01 Torr

Explanation:

Colligative property. In this case, we apply the lowering vapor pressure.

ΔP = P° . Xm

P° - P' = Vapor pressure of pure solvent - Vapor pressure of solution = ΔP

Xm is the molar fraction for solute. We try to determine it:

Moles of solute / Total moles → Total moles = Solute moles + Solvent moles

10.3 g . 1mol / 154 g = 0.0669 moles of biphenyl

27.8 g . 1mol / 78 g = 2.32 moles of benzene

Total moles = 2.32 moles + 0.0669 moles = 2.3869 moles

Xm for solute = 0.0669 / 2.3869 = 0.028

Let's replace data:

100.84 Torr - P' = 100.84 Torr . 0.028

P' = - (100.84 Torr . 0.028 - 100.84Torr) = 98.01 Torr

Answer:

The vapor pressure of the solution is 84.9 torr

Explanation:

Biphenyl is a nonvolatile, nonionizing solute

Temperature = 25.0 °C

Vapor pressure = 100.84 torr

Mass of biphenyl = 10.3 grams

Mass of benzene = 27.8 grams

Molar mass biphenyl = 154.21 g/mol

Molar mass benzene = 78.11 g/mol

Step 2: Calculate moles

Moles = mass / molar mass

Moles biphenyl = 10.3 grams / 154.21 g/mol

Moles biphenyl = 0.0668 moles

Moles benzene = 27.8 grams / 78.11 g/mol

Moles benzene = 0.356 moles

Step 3: Calculate total moles

Total moles = 0.0668 moles + 0.356 moles

Total moles= 0.4228 moles

Step 4: Calculate mol fraction benzene

Mol fraction benzene = moles benzene / total moles

Mol fraction benzene = 0.356 moles / 0.4228 moles

Mol fraction benzene = 0.842

Step 5: Calculate vapor pressure of the solution

Psol = Xbenzene  * P°benzene

⇒Psol = the vapor pressure of the solution

⇒Xbenzene = mol fraction of benzene

⇒P°benzene = the vapor pressure of pure benzene

Psol = 0.842 * 100.84 torr

Psol = 84.9 torr

The vapor pressure of the solution is 84.9 torr

Liquid hexane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 9.48 g of hexane is mixed with 43. g of oxygen. Calculate the minimum mass of hexane that could be left over by the chemical reaction. Be sure your answer has the correct number of significant digits.

Answers

Answer:

No mass of hexane could be left over by the chemical reaction.

C₆H₁₄ is the limitin reagent

Explanation:

This is a combustion reaction were the oxygen is one of the reactant and it burns a compound in order to generate water and carbon dioxide.

In this case, we have liquid hexane combustion, so the reaction is:

2C₆H₁₄(l) +  19O₂(g)  →   12CO₂(g) +  14H₂O(g)

In this situation we are asked for the mass of a reactant that could be left over, this is the excess reagent.

We convert the masses of reactants to moles:

9.48 g . 1mol  / 86g = 0.110 moles of C₆H₁₄

43 g . 1 mol/32 g =  1.34 moles of O₂

The hexane may be the excess reagent but we confirm like this:

19 moles of O₂ need 2 moles of hexane to react

Then, 1.34 moles of O₂ will react with (1.34 . 2) / 19 = 0.141 moles

We need 0.141 moles, and we only have 0.110. Hexane is the limiting reagent so no mass could be left over by the chemical reaction.

In conclussion, oxygen is excess reactant. We verify:

2 moles of hexane need 19 moles of O₂ to react

Then, 0.110 moles of hexane will react with (0.110 . 19) / 2 = 1.04 moles of O₂

As I have 1.34 moles of oxygen, value is higher so in this case we are having mass that could be left over by the reaction.

Other Questions
What is the factorization of the expression below 16x^2-49 Question: Como te gust patinando?Responses:1. Mi divierte mucho!2. No me gusto3. Fue aburridoReactions for response #1:1. Que bueno!2. Me alegro que te gust3. Saba que hara gusta esoReactions for response #2:1. Eso es muy malo2. Porque no?3. Pensaba que te iba a gustarReactions for response #3:1. Lament que no lo hayas disfrutado2. Espero que podamos encontrar una actividad que disfrutes3. Que encontraste aburrido?These all need to be imperfect tense. By themselves, ________ do not measure the financial performance of an ad campaign. But they are useful for evaluating many of the decisions that go into a campaign, such as keyword selection and ad copy. A website manager has noticed that during the evening hours, about 5 people per minute check out from their shopping cart and make an online purchase. She believes that each purchase is independent of the others and wants to model the number of purchases per minute. a) What model might you suggest to model the number of purchases per minute? b) What is the probability that in any one minute at least one purchase is made? c) What is the probability that seven people make a purchase in the next four minutes? The 1932 decision by hoover and congress to raise income is called what law? Of the total base sequence in human DNA, what percentage codes for proteins? A) Nearly 50 percentB) About 5 percentC) About 90 percentD) 100 percent Order of operations 8 (4)(8)-14 3 Heron and Hummingbird began their ascent from the land, flying high enough to avoid the trees in their path. They coasted over the green canopy of leaves. The heron, realizing that it was going to be a long race, kept a good attitude. After about a half mile, Hummingbird spotted a patch of violets. He dove from his place in the sky with a loud zoom to taste the nectar from the flowers. It was so good that he took a break from the race for a long sweet drink. Heron glanced down at his friend, but kept flying straight ahead like an engine on a railroad track. After a while, Hummingbird struggled to get back into the race, his belly full of nectar. He decided to settle down in a cozy moss nest on the side of a tree for some shuteye.In paragraph 3, what is implied by the sentence Heron glanced down at his friend, but kept flying straight ahead like an engine on a railroad track?A)Heron remained alert and determined.B)Heron had an important schedule to keep.C)Heron was not sure how get to the mountain.D)Heron ran out of steam as he finished the race. SunDay Holidays paid a fee to Google to display a link of their website when a user enters a keyword related to holidays or vacations. The link gets displayed on the right side of the search results page. This link is an example of:___________ Two cars are driving towards an intersection from perpendicular directions. The first car's velocity is 2 meters per second and the second car's velocity is 9 meters per second. At a certain instant, the first car is 8 meters from the intersection and the second car is 6 meters from the intersection. What is the rate of change of the distance between the cars at that instant (in meters per second)? Choose 1 answer: a -10b -7 -8.4 0.103 rounded to two decimal places A string is stretched to a length of 212 cm and both ends are fixed. If the density of the string is 0.02 g/cm, and its tension is 357 N, what is the fundamental frequency? Course hero Select the values of xxx that make the inequality true. x>\dfrac 12x> 2 1 x, is greater than, start fraction, 1, divided by, 2, end fraction Choose 2 answers: Choose 2 answers: (Choice A) A 2\dfrac132 3 1 2, start fraction, 1, divided by, 3, end fraction (Choice B) B 000 (Choice C) C -1\dfrac 121 2 1 minus, 1, start fraction, 1, divided by, 2, end fraction (Choice D) D 111 (Choice E) E -\dfrac34 4 3 minus, start fraction, 3, divided by, 4, end fraction Report a problem 10 of 20 Which of these factors helped Germany annex Austria?A. Great Britain agreed that Germany should control all German-speaking states.B. People in Austria wanted Germany to protect them from a Frenchinvasion.C. Germany promised to grant political rights to Austrian ethnicminorities.D. Austrian citizens felt an increasing sense of German nationalismbefore World War II. Consumers of social services most often need _____ to solve their problems. In the laboratory 6.67 g of Sr(NO3)2 is dissolved in enough water to form 0.750 L. A 0.100 L sample is withdrawn from this stock solution and titrated with a 0.0460 M solution of Na3PO4. a. What is the concentration of the Sr(NO3)2stock solution? b. Write a balanced molecular equation for the titration reaction. c. How many milliliters of the Na3PO4 solution are required to precipitate all the Sr2+ ions in the 0.100 L sample? (MM's: Sr(NO3)2 = 211.64; Na3PO4 =163.94)Name #Write a function called hide_and_seek. The function should #have no parameters and return no value; instead, when #called, it should just print the numbers from 1 through 10, #follow by the text "Ready or not, here I come!". Each #number and the message at the end should be on its own #line. # A process that performs at a 6 sigma level: a. is considered statistically 'perfect' b. has 3.4 defects per million opportunities c. operates at a 99.99966% accuracy d. all of the above e. some of the above I need help really quick with 1 math problem. Different between sperm and ovum?