Answer:
2H2O2-----2H2O+O2
Explanation:
This is because theres the same number of atoms of each element on both sides
If I drink two 5 hour energy drinks. Will I have twice the amount of energy for 5 hours or 10 hours of energy?
No I don't think it works that way. What you could do is drink one energy drink, wait 5 hours and then drink another.
Answer:
10 hrs of energy
Explanation:
these bottles hold energy for 5hrs so if it is double you have double the time of energy
which of the following sets of terms best describes sound waves
A) Mechanical and Transverse
B) Electromagnetic and Transverse
C) Electromagnetic and Longitudinal
D) Mechanical and Longitudinal
????????Please hurry
Sound waves are D) Mechanical and Longitudinal
Explanation:
In physics, waves are classified into two types:
Mechanical waves are those waves that need a medium to propagate - these waves are produced by the vibrations of the particles of the mediumElectromagnetic waves are produced by the alternating vibrations of electric and magnetic fields - they are the only waves that can also travel through a vacuum, so they do not need a mediumMoreover, waves are further classified into:
Transverse waves are those in which the vibration of the wave occurs in a direction perpendicular to the direction of propagation of the waveLongitudinal waves are those in which the vibration of the wave is parallel (back and forth) to the direction of propagation of the waveSound waves are oscillations of a medium that occurs back-and forth along the direction of propagation of the wave. Therefore, they are mechanical (they need a medium to propagate) and longitudinal. So the correct answer is
D) Mechanical and Longitudinal
Learn more about sound waves:
brainly.com/question/4899681
#LearnwithBrainly
Final answer:
Sound waves are best described as Mechanical and Longitudinal waves, as they need a medium to travel and have disturbances parallel to the direction of propagation in fluids.
Explanation:
The set of terms that best describes sound waves is Mechanical and Longitudinal. Sound waves require a medium to travel through, which makes them mechanical waves. Furthermore, in fluids such as air and water, sound waves are longitudinal because their disturbances (variations in pressure) are parallel to the direction of propagation. In solids, sound waves can be both longitudinal and transverse; however, in the context of your question which seems to imply a generic scenario, the focus is often on sound in fluids.
If the mass of 1.00 the of a compound is found to be 150.0 g, what is the molecular formula of the compound?
Answer:
calculate the molecular formula of a compound with the empirical formula CH2O and a molar mass of 150g/mol
the molecular formula is [tex]C_{5} H_{10}O_{5}[/tex]
The molecular formula of a compound is the formula comprising of the constituent elements chemical symbols each of which carries the number of atoms of that element present in a molecule of the compound appearing in the smallest whole number ratio to other eatoms present in the compound
Explanation:
The masses of the constitent element is determined forst from which the number of moles is then calculated by dividing the mass by the molar mass then then each calculated molar mass value is divided by the smallest number of moles calculated from the previous step so the value calculated is then rounded up to the nearest whole number giving the ratios of the moles of the elements in the compound which represents the subscripts in the empirical formula of the compound.
If the subscrips are in fractions, then multiply each of them by the same number to derive the smallest whole number factor, that is if the calculated formula contains a facor of 0.5, multiply by 2
Mass pf Carbon = 12g
mass of Hydrogen = 1g
molar mass of oxygen - 16g
Total mass of CH2O = 30g
Therefore dividing molar mass by empirical formula mass = 150g/30g = 5
Hence our factor is 5
multiplying each subscript of the empirical formula by 5 gives
C5H10O5 hence the molecular formula is [tex]C_{5} H_{10}O_{5}[/tex]
Phosphoric acid, H 3 P O 4 ( aq ) , is a triprotic acid, meaning that one molecule of the acid has three acidic protons. Estimate the pH and the concentrations of all species in a 0.100 M phosphoric acid solution.
Phosphoric acid is a triprotic acid that can donate three protons in solution, forming three anions. The pH of a 0.100 M solution is approximately 1.0, assuming it only ionizes once. The concentrations of the formed species are estimated to be highest for H2PO4⁻ and much lower for HPO4²⁻ and PO4³⁻.
Explanation:Phosphoric acid, H3PO4 is a triprotic acid, meaning it can donate three hydrogen ions in a solution. This results in the formation of three different species: H2PO4⁻, HPO4²⁻, and PO4³⁻.
The estimated pH of a 0.100 M phosphoric acid solution will depend on the degree of dissociation, but for the first ionization, we can approximate it using the expression pH=-log[H⁺], where [H⁺] is the hydronium ion concentration. Given that a 0.100 M phosphoric acid solution ionizes mostly once, we have [H⁺]≈0.100 M, leading to an estimated pH around 1.0.
Next, the concentrations of the species in equilibrium can be calculated without exact Kb or Ka values as long as we make the approximation that dissociation after the first hydrogen ion is minimal in a dilute solution like 0.100 M. In this case, we will assume [H2PO4⁻]≈0.100 M and [HPO4²⁻] and [PO4³⁻] will be much less than [H2PO4⁻].
Learn more about Phosphoric Acid here:https://brainly.com/question/8156365
#SPJ6
Information gathered by a scientist about the toxicity of chemical X and chemical Y showed that they had individual safe limits for fish at particular concentrations. But when they were used together at the safe concentrations, there were extensive fish kills. This is an example of _________
Answer:
Synergism
Explanation:
This is an example of Synergism. Synergism is nothing but working out of two medicines together.
Examples of medical synergies are when doctors treat microbial heart infections with ampicillin and Gentamicin and when people with cancer undergo radiation and chemotherapy or more than one chemotherapy drug at a time.
The force between two atoms is the result of _____________________ repulsion, nucleus-nucleus ________________, and nucleus-electron _______________. At the point of _____________________, the ______________ forces balance the ____________ forces. The most stable arrangement of atoms exists at the point of __________________________, when the atoms bond covalently and a __________ forms.
Answer:
(1). electron electron repulsion(2). repulsion (3). attraction (4). maximum attraction (5). attractive (6). repulsive (7). maximum attraction (8). moleculeExplanation:
The same charges repel each other while opposite charges attract each other. During electron-electron interaction repulsion take palace because the electron has negative charges. Nucleus has positive charges so the interaction between two nucleus results in the form of repulsion. When interaction takes place between nucleus and electron then attraction takes place between nucleus and electrons due to opposite charges.
The formation of a bond that takes place due to the sharing of the electrons is known as a covalent bond and thus the covalent molecule is formed.
The forces between two atoms is the result of electron-electron repulsion, nucleus-nucleus repulsion, and nucleus-electron attraction. At the point of equilibrium, the attractive forces balance the repulsive forces. The most stable configuration of atoms exists at the point of minimum potential energy, when the atoms bond covalently and a covalent bond forms.
The force of attraction between atoms leads to the formation of covalent bonds. The force of attraction is defined by the magnitude of oppositely charged ions bonded with one another. There are various forces of attraction in between molecules which are studied in chemistry. These are:
London-dispersion forcesHydrogen bondingVanderwaal forces of attraction, etc.The vapor pressure of liquid pentane, C5H12, is 100. mm Hg at 260 K. A 0.218 g sample of liquid C5H12 is placed in a closed, evacuated 350. mL container at a temperature of 260 K. Assuming that the temperature remains constant, will all of the liquid evaporate? What will the pressure in the container be when equilibrium is reached? mm Hg
Answer:
The right answer to this question is no, all of the liquid will not evaporate, there will be 8.61 ×10⁻⁴ moles or 6.22×10⁻² grams left in the container
At equilibrium the pressure in the container will be the vapor pressure of liquid pentane which is = 100. mm Hg
Explanation:
To solve this we list the known values as follows
vapor pressure of liquid pentane = 100 mmHg = 13.33 KPa
Temperature T = 260 K
Volume of container = 350 mL = 0.00035 m³
The number of moles of liquid pentane = n
The universal gas constant = R = 8.314 J/(mol·K)
Thus From the ideal gas equation PV = nRT →
Thus plugging in the values in the above equateion we have
n = [tex]\frac{PV}{RT} = \frac{(13330)(0.00035)}{(8.314)(260)}[/tex] = 2.16×10⁻³ moles
Hence the number of moles in 0.218 g sample of liquid pentane C₅H₁₂ with molar mass = 72.15 g/mol = 0.218/72.15 = 3.02×10⁻³ moles
Hence the number of moles present in the sample placed in the closed evacuated container = 3.02×10⁻³ moles
However number of moles to completely evaporate at 100 mmHg and 260 K is 2.16×10⁻³ moles hence, 3.02×10⁻³ moles - 2.16×10⁻³ moles, or 8.61 ×10⁻⁴ moles will be left in the container
converting the value in moles to mass we have number of moles, n = mass/(molar mass)
Therefore the mass = number of moles × molar mass = 8.61 ×10⁻⁴ × 72.15 = 6.22 × 10⁻² grams left in the container
The pressure in the container at equilibrium will be vapor pressure of liquid pentane C₅H₁₂, or 100. mm Hg
In the described closed system, all of the liquid pentane will evaporate due to the vapor pressure. The final pressure when equilibrium is reached will be the vapor pressure, which is 100.0 mm Hg.
Explanation:The subject of the question is the vapor pressure of pentane, C5H12, which is a concept from Chemistry.
The given vapor pressure is 100.0 mm Hg at 260 K. In this closed system the liquid and vapor will come to equilibrium at the given temperature, at which point the vapor pressure will be equal to the given 100.0 mm Hg.
The sample mass of 0.218 g doesn't exceed the amount needed for evaporation at the equilibrium pressure. Therefore, all of the liquid pentane will evaporate.
The final pressure in the container when equilibrium is reached will be the vapor pressure, which is 100.0 mm Hg.
Learn more about Vapor Pressure here:https://brainly.com/question/34135527
#SPJ11
A water sample contains the pollutant chlorobenzene with a concentration of 15 ppb. What is the molarity of this solution? Assume the density of the solution is 1.00 g/mL. The molar mass of chlorobenzene is 112.6 g/mol.
Answer:
The molarity is 1.33×10^-7M
Explanation:
15ppb = 15g of chlorobenzene/10^9g of solution × 1 mole of chlorobenzene/112.6g × 1g of solution/mL = 1.33×10^-10mol/mL × 1000mL/1L = 1.33×10^-7mol/L
The molarity of a chlorobenzene solution with a concentration of 15 ppb is calculated by first converting the ppb measurement to mass per volume and then using the molar mass to find the number of moles per liter, resulting in a molarity of 1.33 × 10⁻⁷ M.
Explanation:To calculate the molarity of chlorobenzene in a solution with a concentration of 15 ppb, we first need to convert this concentration into a mass-volume relationship. Since 1 ppb is equivalent to 1 µg/L, 15 ppb is equal to 15 µg/L, which is the same as 0.015 mg/L.
Using the molar mass of chlorobenzene, which is 112.6 g/mol, we can convert this mass into moles using the following equation:
Number of moles = mass (g) / molar mass (g/mol)The solution has a concentration of 15 µg/L, which is equal to 0.015 mg/L or 0.000015 g/L. So the amount of moles of chlorobenzene is:
Number of moles = 0.000015 g / 112.6 g/mol = 1.33 × 10-7 moles/L
Therefore, the molarity of the chlorobenzene solution is 1.33 × 10-7 M.
The Elizabethan view of life changed little from the characteristic Medieval view of life. True False
Answer:
The correct answer is "False".
Explanation:
The Elizabethan Era was a period of England's history that corresponds to the reign of Queen Elizabeth I (1558–1603). The Elizabethan Era is considered a golden age of England's history, and part of the Renaissance Era (1300-1600). The Elizabethan view of life changed drastically from the characteristic Medieval view of life. During Medieval times life was seen with a religiously perspective only, while during The Elizabethan Era more people start to view life with a scientific perspective.
THE ANSWER IS FALSE!
A solution of sugar contains 35 gramsof sucrose, C12H22O11in 100 mL of water. What is the percent composition of the solution?
Answer:
Percent composition of the solution is 26 % of sucrose and 74 % of water
Explanation:
Percent composition is the mass of solute, either of solvent in 100 g of solution.
Mass of solution = Mass of solvent + Mass of solute
Mass of solute = 35 g
Mass of solvent = 100 g
As we know, water density = 1g/mL
So 1g/mL . 100 mL = 100 g
35 g + 100 g = 135 g → Mass of solution
(Mass of solute / Mass of solution) . 100 =
(35 g / 135 g) . 100 = 26 %
(Mass of solvent / Mass of solution) . 100 =
(100 g / 135 g) . 100 = 74 %
To calculate the percent composition of sucrose in the solution, divide the mass of sucrose (35 grams) by the total mass of the solution (sucrose plus water, which is 135 grams) and multiply by 100%. The solution has a percent composition of approximately 25.93% sucrose.
Explanation:The question involves calculating the percent composition of a solution by mass. If a solution contains 35 grams of sucrose (C12H22O11) in 100 mL of water (noting that the density of water is roughly 1 g/mL, so we have 100 grams of water), the total mass of the solution is the sum of the mass of the solute (sucrose) and the solvent (water), which is 35 g + 100 g = 135 g. To find the percent by mass of sucrose in the solution, we use the formula:
Percent by mass of sucrose = (Mass of sucrose / Total mass of solution) × 100%
Inserting the values we have:
Percent by mass of sucrose = (35 g / 135 g) × 100% ≈ 25.93%
Therefore, the percent composition of sucrose in the solution is approximately 25.93%.
The potential difference between two parallel plates 175 V. An α particle with mass of 6.5 × 10-27 kg and charge of 3.2 × 10-19 C is released from rest near the positive plate. What is the kinetic energy of the α particle when it reaches the other plate? The distance between the plates is 20 cm.
Answer:
5.6 × 10⁻¹⁷ J
Explanation:
We know that the work done by an electric field, E on an electric charge, q moving a distance, d is W = qEdcosθ. From above, q = 3.2 × 10⁻¹⁹ C, d = 20 cm = 2 × 10⁻² m, E = V/d = 175V /2 × 10⁻² m = 8750 V/m and θ = 0 since the α particle moves in the same direction as the electric field. So W = qEdcosθ = 3.2 × 10⁻¹⁹ C × 8750 V/m × 2 × 10⁻² m × cos0 = 5.6 × 10⁻¹⁷ J. We know that the work done by the electric field on the charge W = ΔK the change in kinetic energy of the charge. So, W = 1/2m(v₂² - v₁²) where v₁ = initial velocity and v₂ = final velocity. Since the charge is at rest at the positive plate, v₁ = 0. So, W = 1/2mv₂² = K which is the kinetic energy of the particle after moving the distance of 20 cm between the plates. So K = W = 5.6 × 10⁻¹⁷ J
One mole of liquid water and one mole of solid water have different
Answer:
molecules
Explanation:
How many moles of aluminum sulafte is produced when 125 moles of aluminum hydroxide and 136 moles of sulfuric acid react?
Answer:
The answer to this question is 45.33 moles of aluminum sulfate is produced when 125 moles of aluminum hydroxide and 136 moles of sulfuric acid react
Explanation:
To solve this, we write out the chemical equation of he reaction thus
Al(OH)3(s) + 3 H2SO4(aq) -----> Al2 (SO4)3(aq) + 6 H2O(l)
here it is seen that one moles of aluminum hydroxide reacts with three moles of sulfuric to produce one mole of aluminum sulfate and six moles of water
hence
136 moles of sulfuric acid reacts with 136/3 or 45.33 moles of aluminum hydroxide to produce 136/3 or 45.33 moles of aluminum sulfate and 2× 136 moles of water
Hence the amount in moles of aluminum sulfate produced is 45.33 moles
Final answer:
Using the balanced chemical equation 3 Al(OH)3 + 3 H2SO4 → Al2(SO4)3 + 6 H2O, and knowing that aluminum hydroxide is the limiting reactant, 125 moles of aluminum hydroxide will produce 41.67 moles of aluminum sulfate.
Explanation:
The question asks how many moles of aluminum sulfate will be produced when reacting 125 moles of aluminum hydroxide with 136 moles of sulfuric acid. To answer this, we need the balanced chemical equation:
3 Al(OH)3 + 3 H2SO4 → Al2(SO4)3 + 6 H2O
The stoichiometry of the reaction shows that 3 moles of aluminum hydroxide react with 3 moles of sulfuric acid to produce 1 mole of aluminum sulfate. Since there are more moles of sulfuric acid present, aluminum hydroxide is the limiting reactant. Therefore, we can calculate the moles of aluminum sulfate produced by dividing the moles of aluminum hydroxide by 3, which gives us:
125 moles Al(OH)3 ÷ 3 = 41.67 moles Al2(SO4)3 (rounded to two decimal places as per the significant figures in the provided moles of reactants).
THIS IS THE LAST QUESTION I NEED TO FINISH ASSIGNMENT! WILL MARK BRAINLIEST IF CORRECT!!
Above which point on a phase diagram can you no longer distinguish between a liquid and a gas?
melting point
triple point
critical point
boiling point
Answer:
Critical Point
Explanation:
You can no longer distinguish a liquid from a gas when a object hits it's critical point.
High self-monitors prefer situations in which clear expectations exist regarding how they're supposed to communicate. True False
Answer:
True
Explanation:
This are acts or actions that concur with situational expectations.
The tomato is dropped. What is the velocity, vvv, of the tomato when it hits the ground? Assume 93.8 %% of the work done in Part A is transferred to kinetic energy, EEE, by the time the tomato hits the ground.
Answer:
the velocity of the tomato will be v = u + gt
kinetic energy = 9.64 h
Explanation:
The tomato is dropped from a height, so before it lands on the ground, it possesses potential energy. This is the energy relative to its height from the ground.At that time, let the initial speed be u.
The acceleration due to gravity be g
The final velocity will be given as v = u + at
but a = g = 9.81 m/s² [acceleration due to gravity]
so the final velocity will be given as v = u + at
Let the potential energy be Ep
Before landing the ground, 93.8 % of the potential energy will be converted to kinetic energy. Therefore, the calculation will be as follows:
Ep = mgh
Kinetic energy Ek = 1/2mv²
But, Ek = 0.938 Ep
= 0.983 × gh
= 9.64 h
where h is the height of the object from the ground.
A mixture containing 22.5 gg of ice (at exactly 0.00 ∘C∘C) and 77.1 gg of water (at 50.9 ∘C∘C) is placed in an insulated container. Assuming no loss of heat to the surroundings, what is the final temperature of the mixture?
Answer:
The final temperature of the mixture is 21.4°C
Explanation:
Specific heat capacity of water = 1 cal/g°c
Heat loss by water = 77.1 g X 1 cal/g°c X 50.9°c = 3924.39 Cal
Latent heat of fusion of ice = 79.7 g⁻¹
Heat required to melt ice at 0°c= 22.5 g X 79.7 g⁻¹ = 1793.25 Cal
Heat gained by ice from water at a higher temperature, T°c = 22.5 X 1 X T
= 22.5T
Also heat lost by water = 77.1 X 1 X (50.9-T)cal
By calorimetric principle
Heat lost by a hot body = heat gained by a cold body
77.1 X 1 X (50.9-T) = 22.5T + 1793.25
3924.39 -77.1T = 22.5T + 1793.25
99.6T = 3924.39 - 1793.25
T = 2131.14/99.6
T = 21.4°C
Therefore, the final temperature of the mixture is 21.4°C
Why does it take more energy to increase the temperature of 100 grams of liquid water by one degree Celsius than it does 100 grams of copper metal?
Answer:
The answer to your question is below
Explanation:
The specific heat is a physical property equal to the amount of heat necessary to increase the temperature of 1 gram of a substance by one degree celsius.
The lower the specific heat, the lower the amount of heat to increase the temperature 1°C, the higher the specific heat, the higher the amount of heat necessary to increase the temperature by 1°C.
The specific heat of copper is 0.093 cal/g°C
The specific heat of water is 1 cal/g°C.
That is why is necessary more heat to warm water.
More energy to increase the temperature of 100 grams of liquid water by one degree Celsius than it does 100 grams of copper metal due to higher specific heat.
What is specific heat?Specific heat refers to the amount of heat needed to raise the temperature of 1 gram of a substance by 1 degree Celsius. Water has a high specific heat which means it takes more energy to increase the temperature of water compared to other substances like metals.
So we can conclude that more energy is needed to increase the temperature of 100 grams of liquid water by one degree Celsius than copper metal because of higher specific heat of water.
Learn more about metal here: https://brainly.com/question/4701542
All of the following are true concerning enzymes, except that they:
A.) affect the rate of a chemical reation
B.) function as biological catalysts
C.) have an active site
are proteins
D.) are consumed during the reaction.
Answer:
D (or E If properly listed to include the active site option)
Explanation:
A. Is true
Enzymes are organically biochemical catalyst and thus they can speed up the rate of chemical reaction in the body
B is true
They are catalysts as said earlier
C is true
They have active sites. An enzyme does not act on all substrates. They have particular group on which they can act. For example, we have carbohydrates enzymes that act on carbohydrates substrate only. This enzymes have no business acting on a protein substrate.
D. Enzymes are proteins
One of the important characteristics of enzymes is that they are protenious in nature
E. This is wrong. Enzymes like any over catalyst are not consumed in the course of the biochemical reaction
Enzymes are biological catalysts that speed up chemical reactions. These are proteins and have an 'active site' where reactions occur. However, they are not consumed during the reaction.
Explanation:In context to your question about enzymes, they serve specific roles as biological accelerators or catalysts, significantly boosting the rate of a chemical reaction. This property is showcased under option A. They are indeed classified as proteins (option C), and they do have parts called active sites, where the substrate (the molecule upon which the enzyme acts) binds (option B).
However, option D posits that enzymes are consumed during the reaction, which is incorrect. Unlike many catalysts in non-biological reactions that get consumed during the reaction, enzymes remain unaffected by the reaction. They don't exhaust or alter in a reaction and are available to facilitate other reactions once the process is finished.
Learn more about Enzymes here:https://brainly.com/question/31385011
#SPJ6
A solution contains 0.159 mol K3PO4 and 0.941 molH2O. Calculate the vapor pressure of the solution at 55 ∘C. The vapor pressure of pure water at 55 ∘C is 118.1 torr. (Assume that the solute completely dissociates.)
To calculate the vapor pressure of the solution, we need to consider Raoult's law. According to Raoult's law, the vapor pressure of a solution is equal to the mole fraction of the solvent multiplied by the vapor pressure of the pure solvent. In this case, the solvent is water and the solute is K3PO4. To find the mole fraction of water, we divide the moles of water by the total moles of solute and solvent. Using the given values, the vapor pressure of the solution at 55 °C is 101.0 torr.
Explanation:To calculate the vapor pressure of the solution, we need to consider Raoult's law. According to Raoult's law, the vapor pressure of a solution is equal to the mole fraction of the solvent multiplied by the vapor pressure of the pure solvent. In this case, the solvent is water and the solute is K3PO4. To find the mole fraction of water, we divide the moles of water by the total moles of solute and solvent. Using the given values, we have:
Moles of water = 0.941 mol
Total moles of solute and solvent = 0.159 mol K3PO4 + 0.941 mol H2O = 1.1 mol
Mole fraction of water = (0.941 mol) / (1.1 mol) = 0.855
Now, we can use the mole fraction of water and the vapor pressure of pure water to calculate the vapor pressure of the solution:
Vapor pressure of the solution = mole fraction of water * vapor pressure of pure water
= 0.855 * 118.1 torr
= 101.0 torr
Therefore, the vapor pressure of the solution at 55 °C is 101.0 torr.
Using Raoult's Law, the vapor pressure of the solution at 55°C is approximately 100.93 torr.
To calculate the vapor pressure of the solution, we will use Raoult's Law, which states:
[tex]\[ P_{\text{solution}} = X_{\text{solvent}} \cdot P^{\star}_{\text{solvent}} \][/tex]
where:
- [tex]\( P_{\text{solution}} \)[/tex] is the vapor pressure of the solution,
- [tex]\( X_{\text{solvent}} \)[/tex] is the mole fraction of the solvent,
- [tex]\( P^{\star}_{\text{solvent}} \)[/tex] is the vapor pressure of the pure solvent.
Given data:
- Mole fraction of water [tex](\( X_{\text{H2O}} \))[/tex] in the solution:
[tex]\[ X_{\text{H2O}} = \frac{n_{\text{H2O}}}{n_{\text{H2O}} + n_{\text{K3PO4}}}[/tex]
[tex]= \frac{0.941}{0.159 + 0.941} \\\\= \frac{0.941}{1.1} \\ \\ \approx 0.855[/tex]
- Vapor pressure of pure water at 55 °C:
[tex]\[ P^{\star}_{\text{H2O}} = 118.1 \text{ torr} \][/tex]
Now, calculate the vapor pressure of the solution:
[tex]\[ P_{\text{solution}} = X_{\text{H2O}} \cdot P^{\star}_{\text{H2O}} \][/tex]
[tex]\[ P_{\text{solution}} = 0.855 \times 118.1 \text{ torr} \][/tex]
[tex]\[ P_{\text{solution}} \approx 100.93 \text{ torr} \][/tex]
Therefore, the vapor pressure of the solution at 55 °C is approximately 100.93 torr.
75. In Canada and the United Kingdom, devices that measure blood glucose levels provide a reading in millimoles per liter. If a measurement of 5.3 mM is observed, what is the concentration of glucose (C6H12O6) in mg/dL?
Answer:
The answer to this is the concentration of glucose (C6H12O6) in mg/dL = 95.48 mg/dL
Explanation:
To solve this we list out the known variables thus
Measured concentration of glucose (C6H12O6) = 5.3mM per liter
The molar mass of glucose = 180.156 g/mol
From the above, it is seen that one mole of glucose contains 180.156 grams of C6H12O6 therefore 5.3 mM which is 5.3 × 10⁻³ moles contains
5.3 × 10⁻³ moles × 180.156 g/mol = 0.9548 grams of glucose
Also 1 d L = 0.1 L or 1 L = 10 dL and 1 mg = 1000 g, hence
thus 0.9548 grams per liter is equivalent to 1000/10 × 0.9548 milligrams per dL or 95.48 mg/dL
Write the reaction and the corresponding Kb equilibrium expression for each of the following substances (acting as a base in water). (Type your answer using the format H3PO4 for H3PO4, (NH4)2CO3 for (NH4)2CO3, [NH4]+ for NH4+, and [Ni(CN)4]2- for Ni(CN)42-. Use the lowest possible coefficients.)
(a) NH3
(b) CN -
(c) pyridine, C5H5N
(d) aniline, C6H5NH2
Answer: (a) NH3 + H20 ⇔ NH4⁺ + OH⁻ Kb = [tex]\frac{ [NH4][OH]}{[NH3]}[/tex]
(b) CN⁻ + H20 ⇔ HCN⁺ + OH⁻ Kb = [tex]\frac{ [HCN][OH]}{[CN]}[/tex]
(c) C5H5N + H20 ⇔ C5H5NH⁺ + OH⁻ Kb = [tex]\frac{[C5H5NH][OH]}{ [C5H5N]}[/tex]
(d) C6H5NH2 + H20 ⇔ C6H5NH3⁺ + OH⁻ Kb = [tex]\frac{[C6H5NH3][OH]}{[C6H5NH2] }[/tex]
Explanation: There are ways to calculate the strength of acids and bases. The pH is more commom but there is pKa, pKb, Ka and Kb. Ka and Kb are the dissociation constant for acids and bases, respectively.
Using the balanced equation of dissociation, Kb is calculated by dividing the concentration of the products with the concentration of the reagent.
The reactions and Kb equilibrium expressions for NH₃, CN⁻, pyridine (C₅H₅N), and aniline (C₆H₅NH₂) as bases in water are summarized including all necessary chemical equations and equilibrium expressions.
The following reactions and corresponding Kb equilibrium expressions for NH₃, CN⁻, pyridine (C₅H₅N), and aniline (C₆H₅NH₂) acting as bases in water are as follows:
NH₃Place the butane lighter in the sink or tub and let it rest there until needed. why do we soak the lighter in the water bath?
Answer:
To regulate the gas pressure in the lighter tank and avoid build-up of pressure.
Explanation:
First, you need to understand the properties of this organic molecule. Butane. C₄H₁₀ is a colorless, odorless, but HIGHLY FLAMMABLE liquefied gas. The liquid is flammable at 25⁰C whilst the vapor is flammable at 15⁰C. As you can see, this is an extremely flammable gas. It has a high vapor pressure (tendency by liquids to escape as gas molecules) Any external heat source induces a pressure build up that might cause the gas to explode when there is an open flame. Combining the two points above, a thermo-regulated water bath that has a lower temperature (below 15⁰C) will be need to prevent the pressure build up and ensure that any leakage will not have a high vapor pressure.We soak the lighter in the water bath to achieve uniform heating and reduce the fire hazard inherent in direct heating methods, ensuring a safer laboratory environment.
We soak the lighter in the water bath to ensure uniform heating of the reaction mixture with less fire hazard. Direct heating on a Bunsen burner or hot plate can cause uneven temperatures and increased risks of fire or overheating. A water bath is especially beneficial when a chemical reaction must be heated for a certain time to occur. It provides a stable and consistent heat source, which is safer and can prevent accidents in the lab. By using a water bath, we also prevent the lighter from getting excessively hot, which could cause it to malfunction or pose a safety risk.
Please help asap, thank you so much :)
1.which of the following is not an example of a naturally occurring greenhouse gas?
water vapor
nitrous oxide
chlorofluorocarbon
methane
2.Wavelengths of incoming solar radiation are __________________ the wavelengths of reradiated heat.
Which term best completes the sentence?
faster than
the same size as
twice the size of
shorter than
Answer:
The first question is water vapor.
Explanation:
Water vapor is not a green house gas. Clouds are made of water vapor.
If a clot were made up of a mass of proteins, what change in the proteins led to the formation of a clot?
Answer: The proteins were no longer soluble in the blood.
When solid NH4HS is placed in a closed flask at 28oC, the solid dissociates according to the equation below. NH4HS(s) ⇄ NH3(g) + H2S(g). The total pressure of the equilibrium mixture is 0.766 atm. Determine Keq at this temperature.
Answer: 0.147
Explanation:
[tex]K_p[/tex] is the constant of a certain reaction at equilibrium.
For the given chemical reaction:
[tex]NH_4HS(s)\rightleftharpoons NH_3(g)+H_2S(g)[/tex]
at t= 0 0 0 0
at eqm p p
Total pressure = p+p = 0.766 atm
2p= 0.766 atm
p= 0.383 atm
The expression of [tex]K_p[/tex] for above equation follows:
[tex]K_p={p_{NH_3}\times p_{H_2S}}[/tex]
We are given:
[tex]K_p={0.383\times 0.383[/tex]
[tex]K_p=0.147[/tex]
Thus [tex]K_{eq}[/tex] at this temperature is 0.147
The graph represents a moderately weak acid. How would the graph change to represent a relatively strong acid?
A) The HA bar on the left must be much taller.
B) H3O+ would be converted into H+.
C) The right side of the bar graph would have only one bar: H3O+.
D) The HA bar on the right must be converted completely to H3O+ and A-
Answer:
the correct answer is d
Explanation:
The HA bar on the right must be converted completely to H3O+ and A-. Strong acids completely dissociate in solution. Complete dissociation would mean that there is no HA bar left on the right of the arrow.
To represent a strong acid in the graph, the 'HA' bar has to be almost non-existent while the H3O+ and A- bars significantly increase reflecting the fact that strong acids completely disassociate in water. The correct answer is 'The HA bar on the right must be converted completely to H3O+ and A-'.
The correct answer to the given question is option D).
In the context of this question, the graph represents a moderately weak acid and we're asked to determine what changes would occur in the graph for a relatively strong acid.
Here, the 'HA' would represent the weak acid that partially disassociates into H3O+ (hydronium ions) and A- (the conjugate base). One characteristic of a strong acid is that it completely disassociates in water.
Therefore, to represent a strong acid, the 'HA' bar on the right would need to be much lower or even non-existent (to indicate complete disassociation). In turn, the H3O+ and A- bars on the right would need to increase significantly/acquire all the 'HA' bar's original height to represent the products of the strong acid's complete disassociation.
So, the correct answer would be (D) 'The HA bar on the right must be converted completely to H3O+ and A-'.
For more such questions on acid, click on:
https://brainly.com/question/32792692
#SPJ2
A scientist is preparing an experiment. She needs to collect 10 moles of helium gas in a 7.5-liter container before he can begin. The gas temperature inside the helium container will be a constant 20 degrees C. The scientist wants make sure that the pressure exerted by the helium will not burst the gas container. What would be the pressure of the helium gas inside the container?
Answer : The pressure of the helium gas inside the container would be, 32.1 atm
Explanation :
To calculate the pressure of the gas we are using ideal gas equation as:
[tex]PV=nRT[/tex]
where,
P = Pressure of [tex]He[/tex] gas = ?
V = Volume of [tex]He[/tex] gas = 7.5 L
n = number of moles [tex]He[/tex] = 10 mole
R = Gas constant = [tex]0.0821L.atm/mol.K[/tex]
T = Temperature of [tex]He[/tex] gas = [tex]20^oC=273+20=293K[/tex]
Putting values in above equation, we get:
[tex]P\times 7.5L=10mole\times (0.0821L.atm/mol.K)\times 293K[/tex]
[tex]P=32.1atm[/tex]
Thus, the pressure of the helium gas inside the container would be, 32.1 atm
The half of the moon facing the sun is always lit, but the different phases happen because:
Question 1 options:
the Earth moves to different positions around the Sun
we only see parts of the lit side as the moon goes around the Earth
only part of the light gets reflected to Earth
the spinning of the moon lets us see different amounts of light
Answer:
we only see parts of the lit side as the moon goes around the earth
Explanation:
Unlike the sun, the moon orbits the Earth. This is the reason why we see the different phases of the moon. The reflection of the moon is being illuminated back to us with the help of the sun. So, as the moon circles the Earth, we only see parts of the lit side. Such changes helps us see the moon in different phases such as the Third Quarter, Crescent, New Moon, Full Moon, etc.
For example, during "Full Moon," the moon's entire face is lit up by the sun. Thus, we see the entire moon's lit portion.
Thus, this explains the answer.
Why is the expectation value of the energy associated with the 1-D "particle-in-a-box" the same as the eigen value of the Hamiltonian associated with the 1-D "particle-in-a-box" wave function?
Answer: The average potential energy of the PIB is 0 irrespective of the wave function.
Explanation:
⟨H⟩=⟨KE⟩+⟨V⟩
the nn quantum number
⟨KE⟩=(π^2 ℏ^2)/(2mL^2 )
the average kinetic energy of the wavefunction is dependent on
⟨V⟩=∫sin(kx)0sin(kx)dx=0
The average potential energy of the PIB is 0 irrespective of the wave function.
⟨H⟩=⟨KE⟩=(π^2 ℏ^2)/(2mL^2 )