At a particular temperature, Kp 0.25 for the reaction a. A ask containing only N2O4 at an initial pressure of 4.5 atm is allowed to reach equilibrium. Calculate the equilibrium partial pressures of the gases. b. A ask containing only NO2 at an initial pressure of 9.0 atm is allowed to reach equilibrium. Calculate the equilibrium partial pressures of the gases. c. From your answers to parts a and b,does it matter from which direction an equilibrium position is reached?

Answer:

15.95 g

Explanation:

Calculation of the moles of sulfur as:-

Mass = 3.5 g

Molar mass of sulfur = 32.065 g/mol

The formula for the calculation of moles is shown below:

[tex]moles = \frac{Mass\ taken}{Molar\ mass}[/tex]

Thus,

[tex]Moles= \frac{3.5\ g}{32.065\ g/mol}[/tex]

[tex]Moles= 0.1092\ mol[/tex]

From the reaction,

[tex]S+3F_2\rightarrow SF_6[/tex]

1 mole of sulfur on reaction forms 1 mole of sulfur hexafluoride

0.1092 mole of sulfur on reaction forms 0.1092 mole of sulfur hexafluoride

Molar mass of sulfur hexafluoride = 146.06 g/mol

Mass= Moles*Molar mass = 0.1092*146.06 g = 15.95 g

15.95 g is the maximum amount of [tex]SF_6[/tex] that can be produced from the reaction of 3.5 g of sulfur with of fluorine.

The maximum amount of SF6 that can be produced from the reaction of 3.5 g of sulfur with fluorine is 47.7 g.

The question is asking about the maximum amount of sulfur hexafluoride (SF6) produced from the reaction of 3.5 g of sulfur with an unknown amount of fluorine. To determine the maximum amount, we need to calculate the limiting reactant and use its stoichiometry to find the amount of SF6 produced. The balanced equation for the reaction is:

S (s) + 3F2 (g) → SF6 (g)

First, we need to find the molar mass of sulfur (S) and calculate the moles of sulfur:

Molar mass of sulfur (S) = 32.06 g/mol

Moles of sulfur = 3.5 g / 32.06 g/mol = 0.109 mol

Next, we need to find the molar mass of fluorine (F2) and calculate the moles of fluorine:

Molar mass of fluorine (F2) = 38.00 g/mol

Using the stoichiometry of the balanced equation, we can see that 1 mole of sulfur reacts with 3 moles of fluorine to produce 1 mole of SF6. Therefore, the moles of fluorine needed to react with 0.109 mol of sulfur is:

Moles of fluorine = 3 moles of fluorine/mol of sulfur × 0.109 mol of sulfur = 0.327 mol

Finally, we can use the moles of fluorine and the molar mass of SF6 to calculate the mass of SF6 produced:

Molar mass of SF6 = 146.06 g/mol

Mass of SF6 produced = moles of SF6 × molar mass of SF6 = 0.327 mol × 146.06 g/mol = 47.7 g (rounded to two decimal places)

https://brainly.com/question/31050045

#SPJ3

Answer:

In between H and Cl the bond will be covalent.

In between Mg and F the bond will be ionic.

In between Li and N the bond will be ionic .

In between N and S the bond will be polar covalent.

Explanation:

Ionic bonds are defined as the bonds which are formed by the complete transfer of electrons from cation (positively charged ions) to anion (negatively charged ions). For Example: NaCl, [tex]MgF_2[/tex] etc.

Covalent bond is defined as the bond which is formed by the sharing of electrons between the atoms. For Example: HCl, [tex]CH_4[/tex] etc.

Its of two type:

In between H and Cl the bond will be covalent.

In between Mg and F the bond will be ionic.

In between Li and N the bond will be ionic .

In between N and S the bond will be polar covalent.

The type of bond that would be formed between each of the following pairs of atoms will be:

Ionic bonds are formed by the transfer of electrons from cation to anion. An example is NaCl.

Covalent bond is a bond that's formed by the sharing of electrons between atoms. e.g. HCl.

A polar covalent bond is formed when there is the presence of difference in electronegativity between the atoms.

Read related link on:

https://brainly.com/question/3759728

Answer:

c) Boiling point of the reaction mixture (reflux temperature)

Explanation:

Hello,

At first, it is important to remember that esterification is an organic chemical reaction related with the neutralization of organic acids and alcohols to form esters, in this case from 1-butanol and acetic acid to n-butyl acetate as shown below:

[tex]CH_3COOH+CH3(CH_2)2CH_2OH \rightleftharpoons CH_3COOCH_2(CH_2)2CH3+H_2O[/tex]

It is shown that is a reaction which equilibrium condition is present since the n-butyl acetate is likely to come back to the acetic acid and the 1-butanol. Moreover, it is necessary to catalyze esterification with sulfuric acid and including constant heating and stirring, nonetheless, such heating induces boiling of the reacting mixture containing the acetic acid and the 1-butanol which are likely to boil. Therefore, reflux must be implemented as shown on the attached picture to prevent reactant lost which shift the reaction leftwards, diminishing n-butyl acetate yield, thus, the most accurately way to describe the actual temperature is c) boiling point of the reaction mixture (reflux temperature) since acetic acid and 1-butanol have a composition which modifies their boiling point into an only one that is the mixture's boiling point which is also related with the temperature at which the reflux is performed.

Best regards.

The option that best describes most accurately the actual, internal reaction temperature is Boiling point of the reaction mixture (reflux temperature).

It is said to be a very hard task when one is trying to monitor and control the temperature of a reaction chamber when a person do not have expensive and well equipped laboratory tools.

People often uses phase when the above is not in place as it is Phase said to be a form of melting or boiling occur at particular temperatures, and all heat exchanged are said to be done in a phase transition goes into the phase transition.

The main reason of refluxing a solution is done so as to heat a solution in a manner where one can control the outcome at a constant temperature and this is the option that is best for the Fischer esterification experiment of 1-butanol with acetic acid to create n-butyl acetate.

Learn more about reflux temperature from

https://brainly.com/question/40140

The question is incomplete, complete question is:

Carbon tetrachloride can be produced by this reaction:

[tex]CS_2(g) + 3Cl_2(g)[/tex] ⇌ [tex]S_2Cl_2(g) + CCl_4 (g)[/tex]

Suppose 1.1 mol  and 3.3 mol  are placed in a 1.00-L flask and the flask is sealed. After equilibrium has been achieved, the mixture contains 0.82 mol  .

Calculate [tex]K_c[/tex].

Answer:

The value of the [tex]K_c[/tex] of the reaction is 4.05.

Explanation:

[tex]Concentration=\frac{\text{Moles of solute}}{\text{Volume od solution}(L)}[/tex]

Initial concentration of [tex]CS_2[/tex]:

[tex][CS_2]=\frac{1.1 mol}{1 L}=1.1 M[/tex]

Initial concentration of [tex]Cl_2[/tex]:

[tex][Cl_2]=\frac{3.3mol}{1 L}=3.3M[/tex]

Equilibrium concentration of [tex]CCl_4[/tex]:

[tex][CCl_4]=\frac{0.82 mol}{1 L}=0.82 M[/tex]

[tex]CS_2(g) + 3Cl_2(g)[/tex] ⇌ [tex]S_2Cl_2(g) + CCl_4 (g)[/tex]

initially :

1.1 M     3.3 M           0          0

At equilibrium

(1.1-0.82) M     (3.3-3 × 0.82) M                      0.82 M    0.82 M

0.28 M      0.84                           0.82     0.82

The expression of equilibrium constant [tex]K_c[/tex] is given by :

[tex]K_c=\frac{[S_2Cl_2][CCl_4]}{[CS_2][Cl_2]^3}[/tex]

[tex]=\frac{0.82 M\times 0.82 M}{0.28M\times (0.84 M)^3}=4.05[/tex]

The value of the [tex]K_c[/tex] of the reaction is 4.05.

Answer:

In the above reaction, the oxidation state of tin changes from 2+ to 4+.

10 moles of electrons are transferred in the reaction

Explanation:

Redox reaction is:

2BrO₃⁻ + 5SnO₂²⁻ + H2O ⇄ 5SnO₃²⁻ + Br₂ + 2OH⁻

SnO₂²⁻ → SnO₃²⁻

Tin changes the oxidation state from +2 to +4. It has increased it so this is the oxidation from the redox (it released 2 e⁻). We are in basic medium, so we add water in the side of the reaction where we have the highest amount of oxygen. We have 2 O on left side and 3 O on right side so we add 1 water on the right and we complete with OH⁻ in the opposite side to balance the H.  

SnO₂²⁻ + 2OH⁻ → SnO₃²⁻ + 2e⁻ + H₂O Oxidation

BrO₃⁻ →  Br₂

First of all, we have unbalance the bromine, so we add 2 on the BrO₃⁻. We have 6 O in left side and there are no O on the right, so we add 6 H₂O on the left. To balance the H, we must complete with 12OH⁻. Bromate reduces to bromine at ground state, so it gained 5e⁻. We have 2 atoms of Br, so finally it gaines 10 e⁻.

6H₂O + 10 e⁻ + 2BrO₃⁻ →  Br₂ + 12OH⁻ Reduction

In order to balance the main reaction and balance the electrons we multiply  (x5) the oxidation and (x1) the reduciton

(SnO₂²⁻ + 2OH⁻ → SnO₃²⁻ + 2e⁻ + H₂O) . 5

(6H₂O + 10 e⁻ + 2BrO₃⁻ →  Br₂ + 12OH⁻) . 1

5SnO₂²⁻ + 10OH⁻ + 6H₂O + 10 e⁻ + 2BrO₃⁻ → Br₂ + 12OH⁻ + 5SnO₃²⁻ + 10e⁻ + 5H₂O

We can cancel the e⁻ and we substract:

12OH⁻ - 10OH⁻ = 2OH⁻ (on the right side)

6H₂O - 5H₂O = H₂O (on the left side)

2BrO₃⁻ + 5SnO₂²⁻ + H2O ⇄ 5SnO₃²⁻ + Br₂ + 2OH⁻

Answer:

The volume of a 0.0015 [tex]\frac{moles}{liters}[/tex] calcium sulfate solution that contains 25.0 g of calcium sulfate CaSO₄ is 122.53 liters.

Explanation:

Molarity (M) is the number of moles of solute that are dissolved in a given volume. Molarity is expressed by:

[tex]Molarity=\frac{number of moles of solute}{Dissolution volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex]

In this case you have 25.0g of calcium sulfate CaSO₄. First of all you need to know the amount of moles that mass represents. For that you must first know the atomic masses of each element:

Then the molar mass of the compound calcium sulfate is:

molar mass= 40 g/mol + 32 g/mol + 4*16 g/mol= 136 g/mol

It is then possible to apply a rule of three as follows: if 136 g represents 1 mol of the compound calcium sulfate, 25 g how many moles are they?

[tex]moles=\frac{25 g*1 mole}{136 g}[/tex]

moles≅0.1838

Now you can apply a rule of three knowing the molarity of 0.0015 [tex]\frac{moles}{liters}[/tex]: if 0.0015 moles represents 1 liter of solution, 0.1838 moles how many liters are they?

[tex]volume=\frac{0.1838moles*1 liter}{0.0015moles}[/tex]

volume=122.53 liters

The volume of a 0.0015 [tex]\frac{moles}{liters}[/tex] calcium sulfate solution that contains 25.0 g of calcium sulfate CaSO₄ is 122.53 liters.

To find the volume of a 0.0015 mol/L calcium sulfate solution that contains 25.0g of calcium sulfate, first convert the mass to moles, then use the molarity to find the volume. The approximate volume is 122L.

To calculate the volume of the solution, we first need to convert the mass of calcium sulfate in grams to moles. We do this by dividing by the molar mass of calcium sulfate, which is about 136.14 g/mol.

25.0g CaSO4 * (1 mol / 136.14 g) = approx 0.183 mol CaSO4

Then, we use the molarity of the solution to find the volume. Remember that the definition of molarity is moles of solute per liter of solution.

Volume = moles / molarity = 0.183 mol / 0.0015 mol/L = approx 122 L

So, the volume of the calcium sulfate solution is approximately 122 liters.

https://brainly.com/question/32903586

#SPJ3

Answer:

[tex]S_{N}i[/tex] is the major step in forming acid chloride from carboxylic acid and thionyl chloride

Explanation:

Answer:

substances with a higher boiling point are returning back to the flask which allows another substances with the specific context temperature (lower boiling point) to boil over and be purified.

Explanation:

The reason it happens because the lower boiling point substance vaporizes and crosses over while the other substance is waiting for its boiling point to reach

In fractional distillation, the returning condensate from the bottom of the distillation column to the flask enhances the efficiency of the process. The returned condensate serves as a mixing agent, increasing temperature gradients and refining the separation of components. More 'reflux' or returned condensate means more stages of distillation and better separation.

In the process of fractional distillation, when condensate returns to the distilling flask from the bottom of the distillation column, it serves as a mixing agent. It enhances the efficiency of the fractional distillation process. This returning condensate mixes with the rising vapor which leads to a thorough exchange of heat. This increases the temperature gradient in the column, making the distillation more effective in separating the chemical components according to their boiling points. Each 'reflux' or return of condensate causes more 'theoretical plates' or stages of distillation, refining the separation.

https://brainly.com/question/31942191

#SPJ11

Answer:

B. Triazine-resistant weeds were more likely to survive and reproduce

Explanation:

According to darwin's theory of evolution, variation is already present in some members of a population and this variation lets them survive in the adverse condition and those who do not have that variation which helps in survival are lost with time.

So as before using triazine herbicide the major population of the weed were not resistant to this herbicide so in the first few years the nonresistant weeds were lost and only resistant weed which was very less in number survived.

So after several years these resistant weeds reproduced and transferred their gene to their offsprings and became predominant in the field. Therefore the correct answer is B.

Triazine-resistant weeds survived and reproduced due to natural selection, rendering the herbicide less effective over time.

Option (B) is correct.

Option B, the development of triazine-resistant weeds, is the most likely explanation for the increasing pigweed problem. Over time, the repeated use of the same herbicide, like triazine, exerts selective pressure on weed populations.

Some pigweed plants may carry genetic mutations that make them naturally resistant to the herbicide. When the herbicide kills most pigweed, these resistant individuals survive and pass on their resistant traits to their offspring. Eventually, the population becomes dominated by triazine-resistant pigweed, making the herbicide less effective.

This is a classic example of natural selection and the evolution of herbicide resistance in weed populations, a common issue in agriculture when the same herbicide is used repeatedly. The other options are less plausible or unrelated to herbicide resistance.

To learn more about triazine-resistant weeds  here

https://brainly.com/question/26346230

#SPJ12

Answer: The equilibrium concentration of NO after it is re-established is 0.55 M

Explanation:

For the given chemical equation:

[tex]N_2(g)+O_(g)\rightleftharpoons 2NO(g)[/tex]

The expression of [tex]K_{eq}[/tex] for above equation follows:

[tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]     .....(1)

We are given:

[tex][NO]_{eq}=0.400M[/tex]

[tex][N_2]_{eq}=0.200M[/tex]

[tex][O_2]_{eq}=0.200M[/tex]

Putting values in expression 1, we get:

[tex]K_{eq}=\frac{(0.400)^2}{0.200\times 0.200}\\\\K_{eq}=4[/tex]

Now, the concentration of NO is added and is made to 0.700 M

Any change in the equilibrium is studied on the basis of Le-Chatelier's principle. This principle states that if there is any change in the variables of the reaction, the equilibrium will shift in the direction to minimize the effect.

The equilibrium will shift in backward direction.

                           [tex]N_2(g)+O_(g)\rightleftharpoons 2NO(g)[/tex]

Initial:               0.200    0.200        0.700

At eqllm:      0.200+x   0.200+x     0.700-2x

Putting values in expression 1, we get:

[tex]4=\frac{(0.700-2x)^2}{(0.200+x)\times (0.200+x)}\\\\x=0.075[/tex]

So, equilibrium concentration of NO after it is re-established = (0.700 - 2x) = [0.700 - 2(0.075)] = 0.55 M

Hence, the equilibrium concentration of NO after it is re-established is 0.55 M

Answer:

HC₂H₃O₂/KC₂H₃O₂

Explanation:

Considering the Henderson- Hasselbalch equation for the calculation of the pH of the basic buffer solution as:

[tex] pH=pK_b+log\frac{[salt]}{[acid]} [/tex]

For a best pair, the pKa value must be equal to pH.

NH₃/NH₄Cl forms a basic buffer and cannot account for pH = 5

out of the acidic buffer given,

So, HF , Ka = 3.5 × 10⁻⁴ , So pKa = 3.46

HC₂H₃O₂ , Ka = 1.8 × 10⁻⁵ , So pKa = 4.77

The best pair to show pH = 5 is HC₂H₃O₂/KC₂H₃O₂

The pair for the best choice for a pH 5 buffer is:

HC₂H₃O₂/KC₂H₃O₂

The equation that is used for calculation of the pH of the basic buffer solution as:

pH= pkb + log [salt]/ [acid]

For a best pair, the pKa value must be equal to pH.

NH₃/NH₄Cl forms a basic buffer and cannot account for pH = 5

Out of the acidic buffer given,

So, HF , Ka = 3.5 × 10⁻⁴ , So pKa = 3.46

HC₂H₃O₂ , Ka = 1.8 × 10⁻⁵ , So pKa = 4.77

The best pair to show pH = 5 is HC₂H₃O₂/KC₂H₃O₂

Find more information about pH here:

brainly.com/question/24595796

D. Dalton's Law

Explanation:

As the pressure of the gas is related to the sum of the partial pressures of the individual gases present in the mixture was explained by Dalton's law, the given system is an example of Dalton's law.

Boyle's law relates the inverse proportionality of volume and pressure of an ideal gas.

Charles's Law reveals the direct relationship of temperature and volume of an ideal gas.

Avogadro's Law states the relationship between the volume of gas and number of molecules at same pressure as well as temperature.

(D) Dalton's Law states that the pressure of the mixture is found by adding the pressures of the two individual gases.

Dalton’s Law also known as the Law of Partial Pressures states that in a mixture of non-reacting gases the total pressure exerted is equal to the sum of the partial pressures of the gases in the mixture.

Find out more at: https://brainly.com/question/13571237

Answer:

113 mL

Explanation:

Let's apply the Ideal Gases Law for this propose:

P . V = n . R .T → (n. R . T) / P = V

We need to convert the T° to Absolute T° and pressure from mmHg to atm

T° K = 30°C + 273 = 303K

485 mmHg . 1atm / 760 mmHg = 0.638 atm

Let's replace the information obtained:

V = (n . 0.082 . 303K) / 0.638 atm

n = number of moles → 0.128 g . 1mol / 44g = 0.00291 moles

V = (0.00291 moles . 0.082 . 303K) / 0.638 atm → 0.113 L

The value can be written as 113 mL

Answer:

It would take 20 seconds

Explanation:

Let the final concentration of AB be C

Rate = k[C]^2 = change in concentration of AB/time

k is the rate constant = 0.2 L/mol.s

Initial concentration of AB = 1.5 M

Final concentration of AB = 1/3 × 1.5 = 0.5 M

Change in concentration of AB = 1.5 - 0.5 = 1 M

0.2 × 0.5^2 = 1/time

time = 1/0.05 = 20 s

Answer: The value of [tex]K_p[/tex] for the reaction is 0.169

Explanation:

We are given:

Initial partial pressure of A = 1.00 atm

Initial partial pressure of B = 1.00 atm

The given chemical equation follows:

                  [tex]A(g)+2B(g)\rightleftharpoons C(g)+D(g)[/tex]

Initial:         1.00     1.00

At eqllm:     1-x      1-2x           x        x

We are given:

Equilibrium partial pressure of C = 0.211 atm = x

So, equilibrium partial pressure of A = (1.00 - x) = (1.00 - 0.211) = 0.789 atm

Equilibrium partial pressure of B = (1.00 - 2x) = (1.00 - 2(0.211)) = 0.578 atm

Equilibrium partial pressure of D = x = 0.211 atm

The expression of [tex]K_p[/tex] for above equation follows:

[tex]K_p=\frac{p_C\times p_D}{p_A\times (p_B)^2}[/tex]

Putting values in above equation, we get:

[tex]K_p=\frac{0.211\times 0.211}{0.789\times (0.578)^2}\\\\K_p=0.169[/tex]

Hence, the value of [tex]K_p[/tex] for the reaction is 0.169

Answer:

There were 0.00735 moles Pb^2+ in the solution

Explanation:

Step 1: Data given

Volume of the KI solution = 73.5 mL = 0.0735 L

Molarity of the KI solution = 0.200 M

Step 2: The balanced equation

2KI + Pb2+ → PbI2 + 2K+

Step 3: Calculate moles KI

moles = Molarity * volume

moles KI = 0.200M * 0.0735L = 0.0147 moles KI

Ste p 4: Calculate moles Pb^2+

For 2 moles KI we need 1 mol Pb^2+ to produce 1 mol PbI2 and 2 moles K+

For 0.0147 moles KI we need 0.0147 / 2 = 0.00735 moles Pb^2+

There were 0.00735 moles Pb^2+ in the solution

Amino acids that can donate hydrogen bonds include -

With its -NH group, Tryptophan can serve as a hydrogen-bond donor, but its aromatic ring can also serve as an acceptor.

The side chains of three amino acids—arginine, lysine, and tryptophan—contain hydrogen donor atoms.

The side chains of 2 amino acids (aspartic acid and glutamic acid) include hydrogen acceptor atoms.

The side chains of six amino acids—asparagine, glutamine, histidine, serine, threonine, and tyrosine—contain both hydrogen donor and acceptor atoms.

The side chain of threonine has the capacity to serve as a hydrogen bond donor and acceptor. An oxygen atom that is part of the side chain of the amino acid threonine has two possible hydrogen bonding roles: acceptor and donor.

Therefore, from the given list of amino acids, three amino acids can act as hydrogen donor, these include – a. threonine, e. arginine, f. tryptophan.

Learn more about amino acids here:

brainly.com/question/31872499

#SPJ12

At pH 7, the amino acids that can form a hydrogen bond with progesterone are threonine, aspartate, and arginine. Threonine has a polar uncharged group while aspartate and arginine carry a charge, allowing them to participate in hydrogen bonding.

The amino acids that have side chains capable of forming a hydrogen bond with progesterone at pH 7 include threonine, aspartate, and arginine. These amino acids have side chains with polar, uncharged groups or charged groups. To be specific, threonine has a polar, uncharged hydroxyl group which can act as a hydrogen donor or acceptor. Aspartate carries a negative charge at pH 7 and can act as a hydrogen bond acceptor.

https://brainly.com/question/32548305

#SPJ3

Answer:

[tex]P_2=350\ kPa[/tex]

[tex]T_2=59^{\circ}\ C[/tex]

Explanation:

Given that

mass , m = 4 kg

Initial pressure ,[tex]P_1=700\ kPa[/tex]

Initial temperature ,[tex]T_1=59^{\circ}\ C[/tex]

The volume of rigid tanks are same

[tex]V_1=V[/tex]

[tex]V_2=2 V[/tex]

Let's take final temperature[tex] =T_2[/tex]

Given that tank is insulated that is why heat transfer in the tank will be zero.

By using energy balance

[tex]E_{in}-E_{out}=\Delta U[/tex]

[tex]\Delta U[/tex]= Change in the internal energy of the gas

[tex]0 = m C_V(T_2-T_1[/tex])           ( Cv=Specific heat capacity at constant volume)

[tex]0 = T_2-T_1[/tex]

Therefore [tex]T_1=T_2[/tex]

[tex]T_2=59^{\circ}\ C[/tex]

We know that ideal gas equation for gas

P V = m R T

P=pressure ,V=Volume ,m=mass ,R= gas constant ,T=temperature

By using mass conservation

[tex]m=\dfrac{P_1V_1}{RT_1}=\dfrac{P_2V_2}{RT_2}[/tex]

Now by putting the values in the above equation

[tex]\dfrac{700\times V}{RT_1}=\dfrac{P_2\times 2V}{RT_1}[/tex]

[tex]P_2=\dfrac{700}{2}\ kPa[/tex]

[tex]P_2=350\ kPa[/tex]

Therefore the final volume will be 350 kPa and temperature will be 59°C.

The final temperature in the tank is approximately 332.15K. When the volume doubles, the pressure is halved, yielding a final pressure of approximately 350 kPa.

In this problem, your task is to determine the final temperature and pressure in a tank after an ideal gas is allowed to expand. Given the system in question is both insulated (adiabatic) and rigid, we can infer that neither heat (Q) nor work (W) is done, as indicated by the equation AEint=Q-W = 0.

Furthermore, as the internal energy does not change, this implies that the temperature will remain constant. So, the final temperature in the tank is the same as the initial, 59°C. We must convert this into Kelvin, as the equation of state of the ideal gas requires temperature to be in Kelvin. The conversion is as follows: T(K) = T(°C) + 273.15. Therefore, the final temperature is approximately 332.15K.

On the other hand, according to the ideal gas law parameters in this problem, when the volume doubles (since the partition is removed), the pressure is halved. This is reflected by the formula P = nRT/V, where 'n' is the amount of the gas, 'R' is the ideal gas constant, 'T' is the temperature and 'V' is the volume. Therefore, the final pressure is the initial pressure divided by 2, yielding a final pressure of approximately 350 kPa.

https://brainly.com/question/30458409

#SPJ11

Answer: The volume of NaOH required is 22.39 mL

Explanation:

We are given:

Mass of sample = 0.6543 g

Mass percent of oxalic acid = 53.66 %

This means that 53.66 grams of oxalic acid is present in 100 grams of sample

Mass of oxalic acid in the given amount of sample = [tex]\frac{53.66}{100}\times 0.6543=0.351g[/tex]

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of oxalic acid = 0.351 g

Molar mass of oxalic acid = 90 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of oxalic acid}=\frac{0.351g}{90g/mol}=0.0039mol[/tex]

The chemical equation for the reaction of oxalic acid and NaOH follows:

[tex]C_2H_2O_4+2NaOH\rightarrow Na_2C_2O_4+2H_2O[/tex]

By Stoichiometry of the reaction:

1 mole of oxalic acid reacts with 2 moles of NaOH

So, 0.0039 moles of oxalic acid will react with = [tex]\frac{2}{1}\times 0.0039=0.0078mol[/tex] of NaOH

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (in mL)}}[/tex]

Moles of NaOH = 0.0078 moles

Molarity of solution = 0.3483 M

Putting values in above equation, we get:

[tex]0.3483M=\frac{0.0078\times 1000}{V}\\\\V=\frac{0.0078\times 1000}{0.3483}=22.39mL[/tex]

Hence, the volume of NaOH required is 22.39 mL

To determine the volume of NaOH needed to neutralize a 0.6543-g sample of a solid containing 53.66% oxalic acid, we calculate the moles of oxalic acid in the sample and use stoichiometry to determine the moles of NaOH required for neutralization. Finally, we use the formula for molarity to find the volume of NaOH needed.

Oxalic acid, H2C2O4, is a diprotic acid, meaning it can donate two protons (H+) in an acid-base reaction. To determine the volume of 0.3483 M NaOH needed for neutralization of a 0.6543-g sample of the solid containing 53.66% oxalic acid by mass, we need to first calculate the moles of oxalic acid in the sample.

First, we calculate the moles of H2C2O4 in the sample:

Moles of H2C2O4 = mass of H2C2O4 / molar mass of H2C2O4

Next, we use stoichiometry to calculate the moles of NaOH required for neutralization:

Moles of NaOH = 2 * moles of H2C2O4

Finally, we use the formula for molarity to determine the volume of NaOH needed:

The volume of NaOH (L) = moles of NaOH / molarity of NaOH

https://brainly.com/question/29576208

#SPJ11

Answer:

We need 69 grams of NaHCO3

Explanation:

Step 1: Data given

Volume = 550 mL = 0.550 L

Molarity H2SO4 = 0.75 M

Step 2: The balanced equation

H2SO4(aq) + 2NaHCO3(aq) → Na2SO4(aq) + 2H2O(l) + 2CO2(g)

Step 3: Calculate moles of H2SO4

Moles H2SO4 = molarity * volume

Moles H2SO4 = 0.75 M * 0.550 L

Moles H2SO4 =  0.4125 moles H2SO4

Step 4: Calculate moles NaHCO3

For 1 mol H2SO4 we need 2 moles NaHCO3 to produce 1 mol Na2SO4 and 2 moles H2O and 2 Moles CO2

For 0.4125 moles H2SO4 we need 2*0.4125 = 0.825 moles NaHCO3

Step 5: Calculate mass NaHCO3

Mass NaHCO3 = moles * molar mass

Mass NaHCO3 = 0.825 moles * 84.0 g/mol

Mass NaHCO3 = 69.3 grams ≈ 69 grams

We need 69 grams of NaHCO3

Final answer:

To find the number of moles of gas in the bicycle tire, we can use the ideal gas law equation: PV = nRT. Given the pressure and volume of the gas, we can solve for n using the equation n = PV / RT. The number of moles of gas in the bicycle tire is approximately 0.185 moles.

Explanation:

To find the number of moles of gas in the bicycle tire, we can use the ideal gas law equation:

PV = nRT

Where:

Given that the pressure is 765 torr (which is equivalent to 1.01 atm) and the volume is 5.65 L, we can rearrange the equation to solve for n:

n = PV / RT

Substituting the given values, we get:

n = (1.01 atm) x (5.65 L) / (0.0821 L·atm/mol·K x (25 + 273) K)

Simplifying, we find that the number of moles of gas in the bicycle tire is approximately 0.185 moles.

Answer:

98.6 g/mol.

Explanation:

Equation of the reaction

HX + NaOH--> NaX + H2O

Number of moles = molar concentration × volume

= 0.095 × 0.03

= 0.00285 moles

By stoichiometry, 1 mole of HX reacted with 1 mole of NaOH. Therefore, number of moles of HX = 0.00285 moles.

Molar mass = mass ÷ number of moles

= 0.281 ÷ 0.00285

= 98.6 g/mol.

Answer:

The volume CO2 produced is 65.8 L

Explanation:

Step 1: Data given

Mass of octane = 41.9 grams

Molar mass octane = 114.23 g/mol

Step 2: The balanced equation

2C8H18 + 25O2 → 16CO2 + 18H2O

Step 3: Calculate moles octane

Moles octane = mass octane / molar mass octane

Moles octane = 41.9 grams / 114.23 g/mol

Moles octane = 0.367 moles

Step 4: Calculate moles CO2

For 2 moles octane we need 25 moles O2 to produce 16 moles CO2 and 18 moles H2O

For 0.367 moles octane we need 8*0.367 = 2.936 moles

Step 5: Calculate volume of CO2

1 mol = 22.4 L

2.936 moles = 22.4 * 2.936 = 65.8 L

The volume CO2 produced is 65.8 L

Answer: The complete ionic equation is written below.

Explanation:

Complete ionic equation is defined as the equation in which all the substances that are strong electrolyte are present in an aqueous are represented in the form of ions.

The balanced molecular equation for the reaction of lead (II) nitrate and potassium sulfate follows:

[tex]Pb(NO_3)_2(aq.)+K_2SO_4(aq.)\rightarrow 2KNO_3(aq.)+PbSO_4(s)[/tex]

The complete ionic equation for the above equation is:

[tex]2Pb^{2+}(aq.)+2NO_3^{-}(aq.)+2K^{+}(aq.)+SO_4^{2-}(aq.)\rightarrow 2K^+(aq.)+2NO^{3-}(aq.)+PbSO_4(s)[/tex]

Hence, the complete ionic equation is written above.

Answer: The value of [tex]\Delta S^o[/tex] for the surrounding when given amount of CO gas is reacted is 197.77 J/K

Explanation:

Entropy change is defined as the difference in entropy of all the product and the reactants each multiplied with their respective number of moles.

The equation used to calculate entropy change is of a reaction is:

[tex]\Delta S^o_{rxn}=\sum [n\times \Delta S^o_{(product)}]-\sum [n\times \Delta S^o_{(reactant)}][/tex]

For the given chemical reaction:

[tex]2CO(g)+2NO(g)\rightarrow 2CO_2(g)+N_2(g)[/tex]

The equation for the entropy change of the above reaction is:

[tex]\Delta S^o_{rxn}=[(2\times \Delta S^o_{(CO_2(g))})+(1\times \Delta S^o_{(N_2(g))})]-[(2\times \Delta S^o_{(CO(g))})+(2\times \Delta S^o_{(NO(g))})][/tex]

We are given:

[tex]\Delta S^o_{(CO_2(g))}=213.74J/K.mol\\\Delta S^o_{(N_2(g))}=191.61J/K.mol\\\Delta S^o_{(CO(g))}=197.67J/K.mol\\\Delta S^o_{(NO(g))}=210.76J/K.mol[/tex]

Putting values in above equation, we get:

[tex]\Delta S^o_{rxn}=[(2\times (213.74))+(1\times (191.61))]-[(2\times (197.67))+(2\times (210.76))]\\\\\Delta S^o_{rxn}=-197.77/K[/tex]

Entropy change of the surrounding = - (Entropy change of the system) = -(-197.77) J/K = 197.77 J/K

We are given:

Moles of CO gas reacted = 2.00 moles

By Stoichiometry of the reaction:

When 2 mole of CO gas is reacted, the entropy change of the surrounding will be 197.77 J/K

So, when 2.00 moles of CO gas is reacted, the entropy change of the surrounding will be = [tex]\frac{197.77}{2}\times 2.00=197.77J/K[/tex]

Hence, the value of [tex]\Delta S^o[/tex] for the surrounding when given amount of CO gas is reacted is 197.77 J/K

The entropy change for the surroundings when 2.00 moles of CO(g) react at standard conditions is -96.94 J/K.

To calculate the entropy change for the surroundings, we can use the following equation:

ΔSsurroundings = -ΔSsystem - ΔSuniverse

where ΔSsystem is the entropy change of the system and ΔSuniverse is the entropy change of the universe.

The entropy change of the system can be calculated from the standard molar entropies of the reactants and products:

ΔSsystem = ΣS°products - ΣS°reactants

The standard molar entropies of the reactants and products can be found in a standard thermodynamics data table. For the reaction given in the question, the standard molar entropies are as follows:

| Species | S° (J/mol·K) |

|---|---|---|

| CO(g) | 197.69 |

| NO(g) | 210.76 |

| CO2(g) | 213.64 |

| N2(g) | 191.50 |

Substituting these values into the equation for ΔSsystem, we get:

ΔSsystem = (2 mol × 213.64 J/mol·K) + (1 mol × 191.50 J/mol·K) - (2 mol × 197.69 J/mol·K) - (2 mol × 210.76 J/mol·K)

ΔSsystem = -96.94 J/K

The entropy change of the universe is always positive for a spontaneous process. Since the reaction given in the question is spontaneous, the entropy change of the universe is positive. Therefore, the entropy change for the surroundings is negative:

ΔSsurroundings = -ΔSsystem - ΔSuniverse

ΔSsurroundings = -(-96.94 J/K) - (+)

ΔSsurroundings = -96.94 J/K

Therefore, the entropy change for the surroundings when 2.00 moles of CO(g) react at standard conditions is -96.94 J/K.

For more such information on: entropy change

https://brainly.com/question/27549115

#SPJ6

Answer :

(a) Reaction at anode (oxidation) : [tex]4Fe^{2+}\rightarrow 4Fe^{3+}+4e^-[/tex]  

(b) Reaction at cathode (reduction) : [tex]O_2+4H^++4e^-\rightarrow 2H_2O[/tex]  

(c) [tex]O_2+4H^++4Fe^{2+}\rightarrow 2H_2O+4Fe^{3+}[/tex]

(d) Yes, we have have enough information to calculate the cell voltage under standard conditions.

Explanation :

The half reaction will be:

Reaction at anode (oxidation) : [tex]Fe^{2+}\rightarrow Fe^{3+}+e^-[/tex]     [tex]E^0_{anode}=+0.771V[/tex]

Reaction at cathode (reduction) : [tex]O_2+4H^++4e^-\rightarrow 2H_2O[/tex]     [tex]E^0_{cathode}=+1.23V[/tex]

To balance the electrons we are multiplying oxidation reaction by 4 and then adding both the reaction, we get:

Part (a):

Reaction at anode (oxidation) : [tex]4Fe^{2+}\rightarrow 4Fe^{3+}+4e^-[/tex]     [tex]E^0_{anode}=+0.771V[/tex]

Part (b):

Reaction at cathode (reduction) : [tex]O_2+4H^++4e^-\rightarrow 2H_2O[/tex]     [tex]E^0_{cathode}=+1.23V[/tex]

Part (c):

The balanced cell reaction will be,

[tex]O_2+4H^++4Fe^{2+}\rightarrow 2H_2O+4Fe^{3+}[/tex]

Part (d):

Now we have to calculate the standard electrode potential of the cell.

[tex]E^o=E^o_{cathode}-E^o_{anode}[/tex]

[tex]E^o=(1.23V)-(0.771V)=+0.459V[/tex]

For a reaction to be spontaneous, the standard electrode potential must be positive.

So, we have have enough information to calculate the cell voltage under standard conditions.

The molarity of the chromium(III) acetate solution is 0.398 M. The concentration of chromium(III) cation is also 0.398 M, and the concentration of the acetate anion is 1.194 M.

First, we need to recall that the molar mass of chromium(III) acetate is approximately 229.13 g/mol. We can then find the moles of the compound by the equation: moles = mass (g) / molar mass (g/mol). So, moles of chromium(III) acetate = 22.8 g / 229.13 g/mol = 0.0995 mol. Then, using the formula for molarity, M = moles / volume (L). Volume must be in liters, so 250 mL is converted to 0.25 L. This gives us M = 0.0995 mol / 0.25 L = 0.398 M.

As for the concentrations of the chromium(III) cation and the acetate anion, we have to consider the formula of chromium(III) acetate, which is Cr(C2H3O2)3. This indicates that for every 1 mol of compound, there is 1 mol of Cr3+ and 3 mol of C2H3O2-. So the molar concentration of Cr3+ is the same as that of the substance, 0.398 M. The molar concentration of C2H3O2- is three times as much, 0.398 M x 3 = 1.194 M.

https://brainly.com/question/10720472

#SPJ2

Answer:see the picture attached

Explanation:

Final answer:

Resonance structures for benzoic acid highlight electron delocalization, particularly the interaction between the carboxyl group and the para position on the benzene ring. Valence electrons are shown to resonate, creating multiple valid forms which collectively define the resonance hybrid of the molecule.

Explanation:

Resonance Structures of Benzoic Acid

When drawing resonance structures for benzoic acid, especially illustrating the resonance interaction with the para position (position opposite to the carboxyl group), we focus on the delocalization of π-electrons within the benzene ring and the adjacent carboxyl group. For the carboxyl group, one of the oxygen atoms will have a double bond with the carbon to fulfill the octet rule. However, due to the equivalent nature of the oxygen atoms, the double bond can resonate between the two oxygens, creating two resonance forms. At the para position, another resonance form is created by the movement of π-electrons from the benzene ring towards the carboxyl group, thus extending the conjugation and delocalization of electrons throughout the molecule.

Each resonance structure will be carefully drawn ensuring that all atoms obey the octet rule and formal charges are correctly assigned. It's important to note that the actual molecule is better represented by a resonance hybrid, which is an average of all valid resonance forms. This concept signifies that electrons are not strictly localized in one structure, but are distributed across the molecule in a delocalized π-electron cloud.

Answer:

(a) The bellow flow chart shows that the system has 0° of freedom.

(b) i - Fractional conversion of menthol: 0.960 mol CH₃OH reacted/mol fed

    ii - The percentage excess air fed: 28.5%

   iii - molecular fraction of water in the product gas: 0.178 mol H₂O/mol

(c)  Potential Problems: Remedies

    Conflagration: The gas should be vented outside to prevent fire outbreak.

    Toxicity: Put a CO detection alarm in the room.

Explanation:

See picture for the flow chat and calculation of other answers.

A space heater fed with liquid methanol and burned with excess air is analyzed to determine its fractional conversion, percentage excess air fed, and mole fraction of water. The system has zero degrees of freedom. Potential problems when the combustion products are released directly into a room include the release of harmful gases and increased humidity.

To determine if a system has zero degrees of freedom, we need to analyze the material balance and the component balance. In this case, the flow chart shows that the only input is the liquid methanol and the only outputs are the product gases. Since there are no unknown variables or degrees of freedom in the system, we can conclude that the system has zero degrees of freedom.

To calculate the fractional conversion of methanol, we can use the mole percentages of CO2 and CO in the product gas. The fractional conversion is the difference between the initial mole percentage of methanol and the mole percentage of CO and CO2. The percentage excess air fed can be calculated by comparing the mole percentage of O2 in the product gas to the stoichiometric requirement. Finally, the mole fraction of water in the product gas can be found by subtracting the sum of the mole percentages of other components from 100%.

When the combustion products are released directly into a room, potential problems include the release of harmful gases such as CO and the increase in humidity due to the presence of water vapor. To remedy these problems, it is important to ensure proper ventilation and monitoring of indoor air quality. It is also advisable to use a flue or chimney to exhaust the combustion products safely.

https://brainly.com/question/13386150

#SPJ12

Answer:6.94

Explanation:

Molar mass of CaCO3=40+12+16×3

=40+12+48=100g/mol

Moles=mass of substance/molar mass

=97mg/100g=0.097/100=0.00097moles/L.

PH=-log[CaCo3]=-log(0.00097)=6.94

P.s it's log to base e

Final answer:

The alkalinity of the water sample with a pH of 8.2 and bicarbonate concentration of 97 mg/L is 0.00159 moles/L when calculated as bicarbonate, and 159.14 mg CaCO3/L when expressed as equivalent calcium carbonate.

Explanation:

A student has asked about calculating the alkalinity of a water sample with a pH of 8.2 and a bicarbonate concentration of 97 mg/L, both in moles/L and in mg CaCO3/L. To find the alkalinity in moles/L, we need to consider that the molecular weight of HCO3- (bicarbonate) is approximately 61.01 g/mol. Therefore, 97 mg/L can be converted to moles/L by dividing by the molecular weight:

Alkalinity (as HCO3-) = 97 mg/L / (61.01 g/mol * 1000 mg/g) = 0.00159 mol/L.

To convert this alkalinity to mg CaCO3/L, we use the equivalent weight of CaCO3 (100.087 g/mol) since 1 mol of HCO3- is chemically equivalent to 1 mol of CaCO3 for neutralization purposes:

Alkalinity (as CaCO3) = 0.00159 mol/L * 100.087 g/mol * 1000 mg/g = 159.14 mg CaCO3/L.