Answer: The mass of nitrogen gas that must be reacted is 1.4 grams
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] .....(1)
For ammonia:Given mass of ammonia = 1.7 g
Molar mass of ammonia = 17 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of ammonia}=\frac{1.7g}{17g/mol}=0.1mol[/tex]
The chemical equation for the production of ammonia follows:
[tex]N_2+3H_2\rightarrow 2NH_3[/tex]
By Stoichiometry of the reaction:
2 moles of ammonia is produced by 1 mole of nitrogen gas
So, 0.1 moles of ammonia will be produced from [tex]\frac{1}{2}\times 0.1=0.05mol[/tex] of nitrogen gas
Now, calculating the mass of nitrogen gas from equation 1, we get:
Molar mass of nitrogen gas = 28 g/mol
Moles of nitrogen gas = 0.05 moles
Putting values in equation 1, we get:
[tex]0.05mol=\frac{\text{Mass of nitrogen gas}}{28g/mol}\\\\\text{Mass of nitrogen gas}=(0.05mol\times 28g/mol)=1.4g[/tex]
Hence, the mass of nitrogen gas that must be reacted is 1.4 grams
_____ compounds include a prefix on the first and second elements and a suffix on the second element, whereas _____ compounds do not have prefixes and only include a suffix on the second element.
The question refers to the method of naming covalent and ionic compounds. Covalent compounds use prefixes for both elements and a suffix for the second, while ionic compounds do not use prefixes and only have a suffix for the second element.
Explanation:
The given question pertains to the rule for naming compounds in chemistry. The two types of compounds referenced in the question are covalent and ionic compounds. In a covalent compound, both the first and second elements have prefixes and the second element has a suffix. An example would be N2O4, which would be named 'Dinitrogen Tetroxide'. However, in ionic compounds, there are no prefixes and only the second element has a suffix. An example would be NaCl, which is named 'Sodium Chloride'.
Learn more about Naming Compounds here:https://brainly.com/question/34194749
#SPJ3
A small sphere with a mass of 441 g is moving upward along the vertical +y-axis when it encounters an electric field of 5.00 N/C . If, due to this field, the sphere suddenly acquires a horizontal acceleration of 13.0 m/s², what is the charge that it carries?A) 1.15 CB) -1.15 CC) 1150 CD) -1150 C
Answer: Option (A) is the correct answer.
Explanation:
It is known that the relation between force and electric field is as follows.
F = qE .......... (1)
where, F = force
q = charge
E = electric field
Also, we know that, F = ma ...... (2)
Hence, equating equation (1) and (2) as follows.
qE = ma
or, q = [tex]\frac{ma}{E}[/tex]
Therefore, putting the given values into the above formula as follows.
q = [tex]\frac{ma}{E}[/tex]
= [tex]\frac{441 g \times 13.0 m/s^{2}}{5.0 N/C}[/tex]
= 1.1466 C
= 1.15 C (approx)
Therefore, we can conclude that the charge carried by given charge is 1.15 C.
A package of aluminum foil is 63.2 yd long, 11 in. wide, and 0.00035 in. thick. If aluminum has a density of 2.70 g/cm³, what is the mass, in grams, of the foil?
Answer:
Mass of aluminium foil = 387.57_g
Explanation:
density of aluminium foil 2.70 g/cm³,
1_yd = 91.44_cm
1_in = 2.54_cm
Length of aluminum foil = 63.2_yd = 5779.008_cm
Width of aluminium foil = 11 in = 27.94_cm
Thickness of aluminium foil = 0.00035_in. = 0.000889_cm
Volume of aluminium foil = length × width × thickness = 5779.008_cm × 27.94_cm × 0.000889_cm = 143.54_cm^3
Mass of aluminium foil = (volume of aluminium foil) × (density of aluminium foil) = 143.54_cm³ × 2.70 g/cm³ = 387.57_g
To find the mass of the aluminium foil, calculate the volume and multiply it by the density. The mass of the foil is 0.3878 grams.
Explanation:To find the mass of the aluminium foil, we need to calculate the volume and then multiply it by the density. First, let's convert the dimensions to the same unit. The aluminium foil is 63.2 yd long, which is equivalent to 190.4 ft. The width is 11 in, which is 0.92 ft, and the thickness is 0.00035 in, which is 2.92e-5 ft.
The volume of the foil can be calculated by multiplying the length, width, and thickness.
V = (190.4 ft) * (0.92 ft) * (2.92e-5 ft).
This gives us a volume of 5.0634e-3 cubic feet.
Next, we need to convert the volume to cubic centimetres because the density is given in g/cm³.
There are 28.3168 cubic centimetres in one cubic foot, so the volume in cm³ is
5.0634e-3 * 28.3168 = 0.1433 cm³.
Finally, we can calculate the mass by multiplying the volume by the density.
Mass = 0.1433 cm³ * 2.70 g/cm³ = 0.3878 grams.
So, The mass of the foil is 0.3878 grams.
Learn more about Mass of aluminium foil here:https://brainly.com/question/32936801
#SPJ6
A sample of ascorbic acid (vitamin C) is synthesized in the laboratory. It contains 30.0 g carbon and 40.0 g oxygen. Another sample of ascorbic acid, isolated from lemons (an excellent source of the vitamin), contains 12.7 g carbon. Compute the mass of oxygen (in grams) in the second sample.
Answer:
16.933g approximately 17.0 grams
Explanation:
From the simple promotions and given the same compound ascorbic acid (vitamin C)
In the laboratory synthesised ascorbic acid
Mass of carbon = 30.0g
Mas of Oxygen = 40.0g
That is the mass of Oxygen per unit mass of Carbon
Per gram of Carbon we have
(30.0g Carbon)÷30 combines with (40.0g of Oxygen)÷30
That is 4/3g of Oxygen per gram of Carbon
Hence the mass of Oxygen compound that combines with 12.7g of Carbonin natural occurring ascorbic acid (vitamin C) is = 4/3×12.7 = 16.933g approximately 17.0g
The amount of oxygen in the second sample, calculated using the concept of stoichiometry and the ratio of carbon to oxygen in the first sample, is approximately 16.9 grams.
Explanation:This question involves the concept of stoichiometry in Chemistry. Given the masses of carbon and oxygen in the laboratory synthetized sample, we can determine the ratio of carbon to oxygen. This is 30.0g Carbon / 40.0g Oxygen = 0.75. We assume this ratio is the same in any sample of ascorbic acid regardless of its source, because the makeup of a pure substance is always the same. Therefore, to find the amount of oxygen in the lemon-sourced sample, we can use this ratio: 12.7g Carbon / x g Oxygen = 0.75. Solving for x gives us the mass of oxygen, which is approximately 16.9g.
Learn more about Stoichiometry here:https://brainly.com/question/34828728
#SPJ3
Identify the solute with the highest van't Hoff factor. And how do you determine which one is highest?
A) AlCl3.
B) KI.
C) CaCl2.
D) MgSO4.
E) non-electrolyte.
Answer : The correct option is, (A) [tex]AlCl_3[/tex]
Explanation :
Van't Hoff factor : It is defined as the ratio of the experimental value of the colligative property to the calculated value of the colligative property.
We can determine the van't Hoff factor by the association and dissociation of the compound.
(A) [tex]AlCl_3[/tex]
It is an electrolyte that dissociates to give aluminum ion and chloride ion.
The dissociation of [tex]AlCl_3[/tex] will be,
[tex]AlCl_3\rightarrow Al^{3+}+3Cl^{-}[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]Al^{3+}+3Cl^{-}[/tex] = 1 + 3 = 4
(B) [tex]KI[/tex]
It is an electrolyte that dissociates to give potassium ion and iodide ion.
The dissociation of [tex]KI[/tex] will be,
[tex]KI\rightarrow K^{+}+I^{-}[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]K^{+}+I^{-}[/tex] = 1 + 1 = 2
(C) [tex]CaCl_2[/tex]
It is an electrolyte that dissociates to give calcium ion and chloride ion.
The dissociation of [tex]CaCl_2[/tex] will be,
[tex]CaCl_2\rightarrow Ca^{2+}+2Cl^{-}[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]Ca^{2+}+2Cl^{-}[/tex] = 1 + 2 = 3
(D) [tex]MgSO_4[/tex]
It is an electrolyte that dissociates to give magnesium ion and sulfate ion.
The dissociation of [tex]MgSO_4[/tex] will be,
[tex]MgSO_4\rightarrow Mg^{2+}+SO_4^{2-}[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]Mg^{2+}+SO_4^{2-}[/tex] = 1 + 1 = 2
(E) Non-electrolyte
The dissociation non-electrolyte is not possible. So, the Van't Hoff factor will always be, 1.
Hence, the highest van't Hoff factor of solute is, [tex]AlCl_3[/tex]
Van't Hoff factor: It is defined as the ratio of the experimental value of the colligative property to the calculated value of the colligative property.
The correct answer is A) [tex]ALCL_3[/tex]
The van't hoff factor is decided by the number of ions present in the compound.
In option A there are 4 ions that are [tex]AL^3+ and \ CL^-[/tex].
According to the concept, the ions for other options are 4, 1, 3, and, 1 respectively.
The correct option is A.
For more information, refer to the link:-
https://brainly.com/question/22810476
A student carefully drops a 9.0 g solid Zn pellet initially at 50.0°C into an insulated cup containing 30.0 g of water at 27.8°C. The student predicts that the temperature of the water will increase after the pellet is added. Which of the following statements is the best justification for the student's prediction? (A) The metallic bonds between Zn atoms will break when the Zn is exposed to the water molecules, releasing energy that will be absorbed by the water molecules. (B) Collisions between the water molecules and the surface of the Zn pellet will result in the transfer of energy, increasing the average kinetic energy of the water molecules. (C) The strength of the hydrogen bonds between the water molecules will increase when the Zn pellet is added, decreasing the average kinetic energy of the water molecules. (D)Collisions between Zn atoms in the solid will increase in frequency when the Zn is exposed to the water molecules, resulting in the transfer of energy to the surroundings.
Answer: choice B
Explanation: Heat flows from high to low. After you convert the Celsius into kelvin the Zn pellet has 323K and the water has 301K which results the transfer of the heat energy of the pallet to the water. ( you don’t have to convert, but it just make it easier) hope this helped you :)
Answer:
(B) Collisions between the water molecules and the surface of the Zn pellet will result in the transfer of energy, increasing the average kinetic energy of the water molecules.
Explanation:
The question above shows a case of energy transfer and movement of molecules in the generation of heat. Which can be explained as follows:
As you can see, in the question, the solid Zn pellet has a higher temperature than water. There is a physical concept that states that when two bodies of different temperatures come into contact, there is a transfer of energy between them that seeks to equal the temperature of the two bodies. For this reason, when the Zn pellet comes into contact with water, collisions will occur between the water molecules and the surface of the Zn sediment that will result in energy transfer.
However, instead of causing the temperature balance between the water and the Zn tablet, this allows the water to get a higher temperature, because the energy transmitted by zinc increases the kinetic energy of the water molecules. In this case, these tomboys start to move very fast, generating heat.
In order to rinse the system of exhaled C02 and meet the inspiratory flow rate requirements of infants placed on B-CPAP, the flow rate of humidified gas should be set at:_________.
Answer:
In order to rinse the system of exhaled CO2 and meet the inspiratory flow rate requirements of infants placed on B-CPAP, the flow rate of humidified gas should be set at:
A. 16 to 20 L/minute
B. 6 to10 L/minute
C. at least 15 L/minute
D. 11 to 15 L/minute
B. 6 to10 L/minute
Explanation:
Bubble CPAP is a non-invasive, external ventilation technique used for newborn babies with infant respiratory distress syndrome (IRDS). Continuous positive airway pressure (CPAP) is given to a spontaneously breathing newborn baby to preserve lung volumes during expiration