A twin-sized air mattress used for camping has dimensions of 75 cm by 225 cm by 17.5 cm when blown up. The weight of the mattress is 2 kg How heavy a person, in newtons, could the air mattress support if it is floating in freshwater, with density1000 kg/m^3?

Answer : Units of momentum are :

1. Kg m/s

2. N-s

Explanation:

The momentum of an object is given by the product of its mass and velocity with which it is moving. Mathematically, it is given by :

P = mv

Where

m is in kilogram

v is in m/s

Option (1) : N-m = It is not a unit of momentum. It includes the product of force and distance.

Option (2) : Kg s/m = It is again not a unit of momentum.

Option (3) : Kg m/s =

Since, p = mv

p = Kg × m/s

It can be the unit of momentum.

(4) Option (4) : N-s = The change in momentum is equal to the impulse applied on an object. It is given by the product of force and short duration of time. It can be the unit of momentum.

(5) Option (5) : Kg/m²/s² = It is not the unit of momentum.

Hence, the correct options are (c) and (d).

The quantities that are units of momentum among the options provided are C) kg m/s and D) N-s. The other options correspond to different physical quantities.

The concept in question pertains to the momentum of an object, which, in physics, is a vector quantity defined as the product of an object's mass and its velocity. The standard international (SI) unit of momentum is kilogram meter per second (kg m/s).

Examining each giver option: A) Newton meter (N m) is a unit of work, not momentum. B) Kilogram second/meter (kg s/m) does not align with the definition of momentum. C) Kilogram meter/second (kg m/s), this is the correct SI unit for momentum. D) Newton-second (N-s) is also a correct unit for momentum as Newton is equivalent to kg m/s2. E) Kilogram meter2/second2 (kg m2/s2) is the unit for kinetic energy, not momentum.

So, C) kg m/s and D) N-s are the units of momentum among the given choices.

https://brainly.com/question/33450468

#SPJ3

Answer:

A) The ball hits the ground 74.45 m far from the hitting position.

B) Maximum height of the ball = 18.57 m

Explanation:

There are two types of motion in this horizontal and vertical motion.

We have velocity = 27 m/s at 45° above the horizontal

Horizontal velocity = 27cos45 = 19.09 m/s

Vertical velocity = 27sin45 = 19.09 m/s

Time to reach maximum height,

           v = u + at

           0 = 19.09 - 9.81 t

            t = 1.95 s

So total time of flight = 2 x 1.95 = 3.90 s

A) So the ball travels at 19.09 m/s for 3.90 seconds.

     Horizontal distance traveled = 19.09 x 3.90 = 74.45 m

     So the ball hits the ground 74.45 m far from the hitting position.

B) We have vertical displacement

              S = ut + 0.5 at²

              H = 19.09 x 1.95 - 0.5 x 9.81 x 1.95² = 18.57 m

    Maximum height of the ball = 18.57 m

Answer:

9.62 kg

Explanation:

From a z-score table, P(z<-2.33) ≈ 0.01.  So 9.5 should be 2.33 standard deviations below the mean.

z = (x − μ) / σ

-2.33 = (9.5 − μ) / 0.05

-0.1165 = 9.5 − μ

μ = 9.6165

Rounding to 2 decimal places, the mean should be set to 9.62 kg.

The magnitude of the electric field is -1.39 x 10^6 N/C and it is directed inward.

To determine the magnitude and direction of the electric field along the axis of the rod at a point 34.0 cm from its center, we can use the formula for the electric field due to a uniformly charged rod. The formula is given by:

E = (k * Q * L) / (x^2 * sqrt(L^2 + x^2))

where E is the electric field, k is the Coulomb's constant, Q is the total charge on the rod, L is the length of the rod, and x is the distance from the center of the rod to the point where we want to find the electric field.

Substituting the given values:

E = (9.0 x 10^9 Nm^2/C^2 * (-21.0 x 10^-6 C) * 0.10 m) / (0.34 m)^2 * sqrt((0.10 m)^2 + (0.34 m)^2) = -1.39 x 10^6 N/C

The negative sign indicates that the electric field is directed inward.

Answer:

(a) 446.88 N

(b) 241.08 N

Explanation:

m = 60 kg, μs = 0.760, μk = 0.410

(a) To just start the crate moving: the coefficient of friction is static.

F = μs m g

F = 0.760 x 60 x 9.8

F = 446.88 N

(b) To slide the crate with constant speed: the coefficient of friction is kinetic.

F = μk m g

F = 0.410 x 60 x 9.8

F = 241.08 N

Static friction is the friction that occurs in the body when the body is just about to move. The static friction force will be 446.88 N.While the kinetic friction force will be 241.08 N.

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).

Mathematically it is defined as the product of the coefficient of friction and normal reaction.

m is the mass of crate  = 60 kg

μs is the coefficient of static friction = 0.760

μk  is the coefficient of kinetic friction= 0.410

(a) Static friction is the friction that occurs in the body when the body is just about to move.

[tex]\rm F_s = \mu_s m g\\\\\rm F_s = 0.760\times60\times9.8\\\\\rm F_s = 446.88 N[/tex]

Hence static friction force will be 446.8 N.

(b) When the body is moving in a straight and inclined plane the value of friction force acting on the body is known as kinetic friction.

[tex]\rm F_k = \mu_km g\\\\\rm F_k = 0.410\times60\times9.8\\\\\rm F_k= 241.08\; N[/tex]

Hence kinetic friction force will be 241.08 N.

To learn more about friction force refer to the link;

https://brainly.com/question/1714663

Explanation:

It is given that,

Frequency of diagnostic ultrasound, f = 3.82 MHz = 3820 Hz

The speed of the sound in air, v = 343 m/s

(a) We need to find the wavelength in air of such a sound wave. Let it is given by λ₁

i.e. [tex]\lambda=\dfrac{v}{\nu}[/tex]

[tex]\lambda_1=\dfrac{343\ m/s}{3820\ Hz}[/tex]

[tex]\lambda_1=0.089\ m[/tex]

(b) If the speed of sound in tissue is 1650 m/s .

[tex]\lambda_2=\dfrac{v}{\nu}[/tex]

[tex]\lambda_2=\dfrac{1650\ m/s}{3820\ Hz}[/tex]

[tex]\lambda_2=0.43\ m[/tex]

Hence, this is the required solution.

Answer:

Angle the wire make with respect to the magnetic field is 30°.

Explanation:

It is given that,

Length of wire, L = 0.6 m

Current flowing in the wire, I = 2 A

Magnetic field strength, B = 0.3 T

It is placed in the magnetic field. It will experience a force of, F = 0.18 N. We need to find the angle the wire make with respect to the magnetic field. The force acting on the wire is given by :

[tex]F=I(L\times B)[/tex]

[tex]F=ILB\ sin\theta[/tex]

[tex]\theta=sin^{-1}(\dfrac{F}{ILB})[/tex]

[tex]\theta=sin^{-1}(\dfrac{0.18\ N}{2\ A\times 0.6\ m\times 0.3\ T})[/tex]

[tex]\theta=30^{\circ}[/tex]

So, the angle the wire make with respect to the magnetic field is 30°. Hence, this is the required solution.

By substituting the given values and solving for sin(θ), we determined that the wire makes a 30° angle with the magnetic field. Therefore, the wire experiences the magnetic force at this angle.

To determine the angle between a wire carrying a current and a uniform magnetic field, we can use the formula for the magnetic force on a current-carrying wire:

F = I * L * B * sin(θ)

Where:
F is the magnetic force (0.18 N)
I is the current (2.0 A)
L is the length of the wire (0.60 m)
B is the magnetic field strength (0.30 T)
θ is the angle between the wire and the magnetic field

Rearrange the formula to solve for sin(θ):

sin(θ) = F / (I * L * B)

Substitute the given values:

sin(θ) = 0.18 N / (2.0 A * 0.60 m * 0.30 T)

Simplify the expression:

sin(θ) = 0.18 / 0.36 = 0.50

Take the sin (inverse sine) to find θ:

θ = sin⁻¹(0.50) = 30°

Therefore, the wire makes an angle of 30° with respect to the magnetic field.

Answer:

71.8 N

Explanation:

T = Tension force in the strap

W = net work done = 752 J

f = force of friction = 8 N

d = displacement = 15 m

θ = angle between tension force and horizontal displacement = 36 deg

work done by frictional force is given as

W' = - f d

Work done by the tension force is given as

W'' = T d Cos36

Net work done is given as

W = W' + W''

W = T d Cos36 - f d

752 = T (15) Cos36 - (8) (15)

T = 71.8 N

Answer:

180 m

Explanation:

Case 1.

U = 40 km/h = 11.1 m/s, V = 0, s = 20 m

Let a be the acceleration.

Use third equation of motion

V^2 = u^2 + 2 as

0 = 11.1 × 11.1 - 2 × a × 20

a = 3.08 m/s^2

Case 2.

U = 220 km/h = 33.3 m/s, V = 0

a = 3.08 m/s^2

Let the stopping distance be x.

Again use third equation of motion

0 = 33.3 × 33.3 - 2 × 3.08 × x

X = 180 m

Answer:

108 km

Explanation:

The conversion factor between meters and feet is

1 m = 3.28 ft

So the second altitude, written in feet, can be rewritten in meters as

[tex]h_2 = 1.55 \cdot 10^5 ft \cdot \frac{1}{3.28 ft/m}=4.7\cdot 10^4 m[/tex]

or in kilometers,

[tex]h_2 = 47 km[/tex]

the first altitude in kilometers is

[tex]h_1 = 155 km[/tex]

so the difference between the two altitudes is

[tex]\Delta h = 155 km - 47 km = 108 km[/tex]

Answer:

This is because copper is a conductor, and adding more copper spreads electricity more, and thus the magnetic field.

Please mark for Brainliest!!  Thanks! :D

For more information or if you have any questions, please comment below and I'll respond ASAP!! :D

Answer:

Amount of radioactive particles left after 60 years = 100 particles.

Explanation:

Amount of radioactive particles before 60 years = 400

Amount of radioactive particles present today = 200

That is radio active particles reduced to half. That is 60 years is half life of this radio active material.

After 60 years this 200 radio active particles will reduce to half.

Amount of radioactive particles left after 60 years = 0.5 x 200 = 100 particles.

Final answer:

The sample will have 100 radioactive particles remaining 60 years from today, based on the half-life of the material being 60 years.

Explanation:

The question concerns the concept of radioactive decay and specifically the half-life of a radioactive sample. In this case, the sample's quantity of radioactive particles was observed to decrease from 400 to 200 over a span of 60 years. Thus, the half-life of the material is 60 years, which is the time it takes for half of the radioactive atoms (parent nuclei) to decay into their decay products (daughter elements).

Given that the sample has 200 particles today, we can predict that in another 60 years, the number of radioactive particles will again be halved. Therefore, after 60 years from today, we expect there to be 100 radioactive particles remaining in the sample.

Answer:

12.3 m/s

Explanation:

m = mass of the box sliding on frictionless flat surface = 12.5 kg

x = compression of the spring = 14.1 cm = 0.141 m

k = spring constant = 94.5 kN/m = 94500 N/m

v = initial speed of the box

Using conservation of energy

Kinetic energy of the box = Spring potential energy

(0.5) m v² = (0.5) k x²

m v² = k x²

Inserting the values

(12.5) v² = (94500) (0.141)²

v = 12.3 m/s

(a) 7861 N

Along the vertical direction, the plane is moving at constant velocity: this means that the net vertical acceleration is zero, so the vertical component of the 8420 N upward force is balanced by the weight (pointing downward).

The vertical component of the upward force is given by:

[tex]F_y = F sin \theta[/tex]

where

F = 8420 N is the magnitude of the force

[tex]\theta=69.0^{\circ}[/tex] is the angle above the horizontal

Substituting,

[tex]F_y = (8420 N)(sin 69.0^{\circ}) =7861 N[/tex]

This means that the weight of the plane is also 7861 N.

(b) 3.87 m/s^2

From the weight of the plane, we can calculate its mass:

[tex]m=\frac{W}{g}=\frac{7861 N}{9.8 m/s^2}=802 kg[/tex]

Where g = 9.8 m/s^2 is the acceleration due to gravity.

Along the horizontal direction, the 8420 N is not balanced by any other backward force: so, there is a net acceleration along this direction.

The horizontal component of the force is given by

[tex]F_x = F cos \theta = (8420 N)(cos 69.0^{\circ})=3107 N[/tex]

According to Newton's second law, the net force along the horizontal direction is equal to the product between the plane's mass and the horizontal acceleration:

[tex]F_x = m a_x[/tex]

so if we solve for a_x, we find:

[tex]a_x = \frac{F_x}{m}=\frac{3107 N}{802 kg}=3.87 m/s^2[/tex]

The decibel level at 1.20 m is approximately 93 dB. The sound intensity at 36.0 m is approximately 1.58 × 10^-13 W/m². The decibel level at 36.0 m is approximately 83 dB.

(a) To find the decibel level, we can use the formula B(dB) = 10 log10(I/Io), where I is the sound intensity and Io is the reference intensity. Plugging in the given values, we get B = 10 log10(5.50 ✕ 10^-3/10^-12). After evaluating this expression, we find that the decibel level is approximately 93 dB.

(b) To find the sound intensity at a distance of 36.0 m, we can use the inverse square law for sound, which states that the intensity is inversely proportional to the square of the distance. Using the formula I2 = I1(d1^2/d2^2), where I1 is the initial intensity, I2 is the final intensity, d1 is the initial distance, and d2 is the final distance, we find that the sound intensity at 36.0 m is approximately 1.58 × 10^-13 W/m².

(c) To find the decibel level at a distance of 36.0 m, we can use the same formula as in part (a), but with the intensity at 36.0 m as the new value for I. Plugging in the values, we get B = 10 log10(1.58 × 10^-13/10^-12). After evaluating this expression, we find that the decibel level at a distance of 36.0 m is approximately 83 dB.

https://brainly.com/question/31822564

#SPJ12

We calculated the decibel level at [tex]1.20 m[/tex] to be approximately [tex]97.4 dB[/tex] . The sound intensity at [tex]36.0 m[/tex]   is about [tex]6.11 \times 10^{-6} W/m^2[/tex] , and its corresponding decibel level is approximately [tex]67.9 dB[/tex].

(a) Finding the decibel level

The decibel (dB) level can be found using the formula:

[tex]\[\beta = 10 \log_{10} \left( \frac{I}{I_0} \right)\][/tex]

where [tex]I[/tex]  is the sound intensity, and I0 is the reference intensity ([tex]10^{-12} W/m^2[/tex]). Given, I[tex]= 5.50 \times 10^{-3} W/m^2[/tex],

[tex]\[\beta = 10 \log_{10} \left( \frac{5.50 \times 10^{-3}}{10^{-12}} \right)\]\beta = 10 \log_{10} \left( 5.50 \times 10^{9} \right)\]\beta \approx 10 \times 9.74 = 97.4 \, \text{dB}\][/tex]

So, the corresponding decibel level is approximately [tex]97.4 dB[/tex].

(b) Finding the sound intensity at a distance of [tex]36.0 m[/tex]

Sound intensity decreases with the square of the distance from the source. We can use the inverse square law:

[tex]\[I_2 = I_1 \left( \frac{r_1^2}{r_2^2} \right)\][/tex]

Given, [tex]\[I_1 = 5.50 \times 10^{-3} \, \text{W/m}^2, \quad r_1 = 1.20 \, \text{m}, \quad r_2 = 36.0 \, \text{m}\][/tex],

[tex]\[I_2 = 5.50 \times 10^{-3} \left( \frac{1.20^2}{36.0^2} \right)\]I_2 = 5.50 \times 10^{-3} \left( \frac{1.44}{1296} \right)\]I_2 \approx 6.11 \times 10^{-6} \, \text{W/m}^2\][/tex]

The sound intensity at 36.0 m is approximately [tex]6.11 \times 10^{-6} W/m^2[/tex].

(c) Finding the decibel level at a distance of [tex]36.0 m[/tex]

Using the decibel formula again:

[tex]\[\beta = 10 \log_{10} \left( \frac{I}{I_0} \right)\][/tex]

where

[tex]I = 6.11 \times 10^{-6} \, \text{W/m}^2\]\beta = 10 \log_{10} \left( \frac{6.11 \times 10^{-6}}{10^{-12}} \right)\]\beta = 10 \log_{10} \left( 6.11 \times 10^{6} \right)\]\beta \approx 10 \times 6.79 = 67.9 \, \text{dB}\][/tex]

The corresponding decibel level at [tex]36.0 m[/tex] is approximately [tex]67.9 dB[/tex].

Answer:

A) 0.0 kJ

Explanation:

Change in the internal energy of the gas is a state function

which means it will not depends on the process but it will depends on the initial and final state

Also we know that internal energy is a function of temperature only

so here the process is given as isothermal process in which temperature will remain constant always

here we know that

[tex]\Delta U = \frac{3}{2}nR\Delta T[/tex]

now for isothermal process since temperature change is zero

so change in internal energy must be ZERO

Answer:

Distance travelled, d = 0.21 m

Explanation:

It is given that,

Initial velocity of electron, u = 500,000 m/s

Acceleration of the electron, a = 500,000,000,000 m/s²

Final velocity of the electron, v = 675,000 m/s

We need to find the distance travelled by the electron. Let distance travelled is s. Using third equation of motion as :

[tex]v^2-u^2=2as[/tex]

[tex]s=\dfrac{v^2-u^2}{2a}[/tex]

[tex]s=\dfrac{(675000\ m/s)^2-(500000\ m/s^2)^2}{2\times 500000000000\ m\s^2}[/tex]

s = 0.205 m

or

s = 0.21 m

So, the electron will travel a distance of 0.21 meters. Hence, this is the required solution.

The work by tension is ¹¹/₁₀ Mgℓ

[tex]\texttt{ }[/tex]

Complete Question:

An object with mass M is attached to the end of a string and is raised vertically at a constant acceleration of g/10 . If it has been raised a distance ℓ from rest, how much work has been done by the tension in the string?

[tex]\texttt{ }[/tex]

Given:

Mass of the object = M

Acceleration of the object = g/10

Distance = ℓ

Asked:

Work by Tension = W = ?

Solution:

Let's find the magnitude of tension as follows:

[tex]\Sigma F = ma[/tex]

[tex]T - Mg = Ma[/tex]

[tex]T = Mg + Ma[/tex]

[tex]T = M(g + a)[/tex]

[tex]T = M(g + \frac{1}{10}g)[/tex]

[tex]T = M(\frac{11}{10}g)[/tex]

[tex]T = \frac{11}{10}Mg[/tex]

[tex]\texttt{ }[/tex]

[tex]W = T \times L[/tex]

[tex]W = \frac{11}{10}Mg \times L[/tex]

[tex]W = \frac{11}{10}MgL[/tex]

[tex]\texttt{ }[/tex]

The work by tension is ¹¹/₁₀ Mgℓ

[tex]\texttt{ }[/tex]

[tex]\texttt{ }[/tex]

Grade: High School

Subject: Physics

Chapter: Dynamics

[tex]\texttt{ }[/tex]

Keywords: Gravity , Unit , Magnitude , Attraction , Distance , Mass , Newton , Law , Gravitational , Constant

Answer:

The work done by tension in string is [tex]\dfrac{11}{10}MgL}[/tex].

Explanation:

Given data:

Mass of object is, M.

Acceleration of object is, a = g/10.

Distance covered vertically is, L.

The work done by tension in the string is given as,

[tex]W = T \times L[/tex]  .......................................................... (1)

Here, T is the tension force on string.

Apply the equilibrium of forces on string as,

[tex]T- Mg=Ma[/tex]

Here, g is gravitational acceleration.

[tex]T- Mg=M(\dfrac{g}{10} )\\T=M(\dfrac{g}{10} )+Mg\\T=\dfrac{11}{10}Mg[/tex]

Substituting value in equation (1) as,

[tex]W = \dfrac{11}{10}Mg \times L\\W = \dfrac{11}{10}MgL}[/tex]

Thus, the work done by tension in string is [tex]\dfrac{11}{10}MgL}[/tex].

For more details, refer to the link:

https://brainly.com/question/14871010?referrer=searchResults

Answer:

Work done, W = 0 J

Explanation:

It is given that,

Weight of the bucket, W = F = 35 N

It is lifted vertically 3 m and then returned to its original position. We need to find the work gravity do on the bucket during this process.

Work done when the bucket is lifted vertically, W₁ = -mgh

Work done when the bucket returned to its original position, W₂ = +mgh

Net work done, W = W₁ + W₂

W = 0 J

So, the work done on the bucket is zero. Hence, this is the required solution.

Final answer:

The total work done by gravity on a bucket of water that is lifted and then returned to its original position is zero joules (0 J), because gravity does equal amounts of positive and negative work on the bucket during the lifting and lowering phases, respectively.

Explanation:

The question examines the concept of work done by a force, which in physics is defined as the product of the force applied to an object and the distance over which that force is applied, provided the force is applied in the direction of motion. When a bucket of water is lifted vertically and then returned to its original position, gravity does work on the bucket on the way down, but because the bucket returns to its starting position, the total work done by gravity over the entire journey is zero joules (d). This is because gravity does positive work as the bucket is lowered and an equal amount of negative work as the bucket is lifted, resulting in a net work of zero.

Concretely, when the bucket is lifted, work is done against gravity and when it is lowered, gravity does work on the bucket. However, since the starting and ending points are the same, the net work done by gravity over the entire process is zero. It's important to notice that this is true regardless of the path taken; as long as the initial and final positions are the same, the work done by a conservative force such as gravity will be zero.

Explanation:

It is given that,

Charge acquired on rubbing a balloon on your hair, q = -1.93 C

If you move the balloon 25 cm away from your hair, r = 25 cm = 0.25 m

Electric field acting between the balloon and your hair is given by :

[tex]E=\dfrac{kq}{r^2}[/tex]

k = electrostatic constant

[tex]E=\dfrac{9\times 10^9\ Nm^2/C^2\times 1.93\ C}{(0.25\ m)^2}[/tex]

[tex]E=2.779\times 10^{11}\ N/C[/tex]

or

[tex]E=2.78\times 10^{11}\ N/C[/tex]

Hence, this is the required solution.

(a) [tex]y(t)=250 - 4.9 t^2[/tex]

For an object in free-fall, the vertical position at time t is given by:

[tex]y(t) = h + ut - \frac{1}{2}gt^2[/tex]

where

h is the initial vertical position

u is the initial vertical velocity

g = 9.8 m/s^2 is the acceleration of gravity

t is the time

In this problem,

h = 250 m

u = 0 (the stone starts from rest)

So, the vertical position of the stone is given by

[tex]y(t) = 250 - \frac{1}{2}(9.8) t^2 = 250 - 4.9 t^2[/tex]

(b) 7.14 s

The time it takes for the stone to reach the ground is the time t at which the vertical position of the stone becomes zero:

y(t) = 0

Which means

[tex]y(t) = h - \frac{1}{2}gt^2=0[/tex]

So for the stone in the problem, we have

[tex]250 - 4.9 t^2 = 0[/tex]

Solving for t, we find:

[tex]t=\sqrt{\frac{250}{4.9}}=7.14 s[/tex]

(c) -70.0 m/s (downward)

The velocity of an object in free fall is given by the equation

[tex]v(t) = u - gt[/tex]

where

u is the initial velocity

g = 9.8 m/s^2 is the acceleration of gravity

t is the time

Here we have

u = 0

So if we substitute t = 7.14 s, we find the velocity of the stone at the time it reaches the ground:

[tex]v=0-(9.8 m/s^2)(7.14 s)=-70.0 m/s[/tex]

The negative sign means the direction of the velocity is downward.

(d) 6.94 s

In this situation, the stone is thrown downward with an initial speed of 2 m/s, so its initial velocity is

u = -2 m/s

So the equation of the vertical position of the stone in this case is

[tex]y(t) = h + ut - \frac{1}{2}gt^2=250 - 2t - 4.9 t^2[/tex]

By solving the equation, we find the time t at which the stone reaches the ground.

We find two solutions:

t = -7.35 s

t = 6.94 s

The first solution is negative, so it has no physical meaning, therefore we discard it. So, the time it takes for the stone to reach the ground is:

t = 6.94 s

An object in free fall, like a stone dropped from a tower, has its motion governed by the acceleration due to gravity. Using the physics of motion, we can find the height of the stone at any given time, the time it takes to reach the ground, the velocity it strikes the ground, and the time taken if it is initially thrown downward.

To solve these types of questions, we need to use the physics of motion. In the case of an object in free fall like a stone dropped from a tower, the only force acting on it is gravity, which pulls it downwards.

(a) The formula h(t) = 250 - 1/2gt^2 represents the height of the stone above ground level at any time t. Here, g is the acceleration due to gravity (9.8 m/s^2).

(b) The stone will reach the ground when h(t) = 0. Solving the equation 250 - 1/2*9.8*t^2 = 0 gives t ≈ 7.18 seconds (rounded to two decimal places).

(c) The velocity v with which the stone strikes the ground can be found using v = gt. Substituting g = 9.8 m/s^2 and t = 7.18 s gives v ≈ 70.4 m/s (rounded to one decimal place).

(d) If the stone is thrown downward with initial velocity of 2 m/s, the equation for time becomes 250 -2t- 1/2*9.8*t^2 = 0. Solving this gives t ≈ 7.04 seconds (rounded to two decimal places).

https://brainly.com/question/13966796

#SPJ3

Answer:

(a) 0.0178 Ω

(b) 3.4 A

(c) 6.4 x 10⁵ A/m²

(d) 9.01 x 10⁻³ V/m

Explanation:

(a)

σ = Electrical conductivity = 7.1 x 10⁷ Ω-m⁻¹

d = diameter of the wire = 2.6 mm = 2.6 x 10⁻³ m

Area of cross-section of the wire is given as

A = (0.25) π d²

A = (0.25) (3.14) (2.6 x 10⁻³)²

A = 5.3 x 10⁻⁶ m²

L = length of the wire = 6.7 m

Resistance of the wire is given as

[tex]R=\frac{L}{A\sigma }[/tex]

[tex]R=\frac{6.7}{(5.3\times10^{-6})(7.1\times10^{7}) }[/tex]

R = 0.0178 Ω

(b)

V = potential drop across the ends of wire = 0.060 volts

i = current flowing in the wire

Using ohm's law, current flowing is given as

[tex]i = \frac{V}{R}[/tex]

[tex]i = \frac{0.060}{0.0178}[/tex]

i = 3.4 A

(c)

Current density is given as

[tex]J = \frac{i}{A}[/tex]

[tex]J = \frac{3.4}{5.3\times10^{-6}}[/tex]

J = 6.4 x 10⁵ A/m²

(d)

Magnitude of electric field is given as

[tex]E = \frac{J}{\sigma }[/tex]

[tex]E = \frac{6.4 \times 10^{5}}{ 7.1 \times 10^{7}}[/tex]

E = 9.01 x 10⁻³ V/m

Answer:

696.83 m/s

Explanation:

m = mass of water = 565 g = 0.565 kg

c = specific heat of water = 4186 J/(kg⁰C)

ΔT = Change in temperature = T₂ - T₁ = 80 - 22 = 58 ⁰C

v = speed gained by water

Using conservation of energy

Kinetic energy gained by water = heat required to warm water

(0.5) m v² = m c ΔT

(0.5) v² = c ΔT

(0.5) v² = (4186) (58)

v = 696.83 m/s

Answer:

0.84μF

Explanation:

Charge is same through both the capacitors since they are in series. Total voltage is the sum of the voltages of the individual capacitors.. So voltage across the 2nd capacitor is 120- 90 =30 V.

Charge across first capacitor is Q = C₁V₁ = 90 x0.28 = 25.2μC

Therefore capacitance of 2nd capacitor =

C₂ = Q÷V₂ = 25.2÷30 = 0.84 μF

Answer:

Peak current = 16.9 A

Explanation:

Given that

RMS voltage = 120 Volts

[tex]V_{rms} = 120 V[/tex]

AC is connected across resistance

[tex]R = 10 ohm[/tex]

now by ohm's law

[tex]V = i R[/tex]

[tex]120 = i (10)[/tex]

[tex]i_{rms} = \frac{120}{10} = 12 A[/tex]

now peak value of current will be given as

[tex]i_{peak} = \sqrt{2} i_{rms}[/tex]

[tex]i_{peak} = \sqrt2 (12) = 16.9 A[/tex]

Answer:

T = 50 + 80e^(-0.2t)

Explanation:

Newton's law of cooling says the rate of change of temperature with respect to time is proportional to the temperature difference:

dT/dt = k (T − Tₐ)

Separating the variables and integrating:

dT / (T − Tₐ) = k dt

ln (T − Tₐ) = kt + C

T − Tₐ = Ce^(kt)

T = Tₐ + Ce^(kt)

Given that Tₐ = 50 and k = -0.2:

T = 50 + Ce^(-0.2t)

At t = 0, T = 130.

130 = 50 + Ce^(0)

130 = 50 + C

C = 80

Therefore:

T = 50 + 80e^(-0.2t)

The formula for the object cooling is [tex]T(t) = 50 + 80\cdot e^{-0.2\cdot t}[/tex], where [tex]t[/tex] is in minutes.

The object is cooled by heat mechanism of Convection, Convection is a Heat Transfer mechanism in which is a solid object is cooled due to a fluid in motion and is described by the Newton's Law of Cooling, whose Differential Equation is:

[tex]\frac{dT}{dt} = -r\cdot (T-T_{m})[/tex] (1)

Where:

[tex]T[/tex] - Temperature of the solid, in degrees Fahrenheit.

[tex]r[/tex] - Cooling rate, in [tex]\frac{1}{min}[/tex].

[tex]T_{m}[/tex] - Water temperature, in degrees Fahrenheit.

The solution of this Differential Equation is:

[tex]T(t) = T_{m} + (T_{o}-T_{m})\cdot e^{-r\cdot t}[/tex] (2)

Where [tex]T_{o}[/tex] is the initial temperature of the solid, in degrees Fahrenheit.

If we know that [tex]T_{m} = 50\,^{\circ}F[/tex], [tex]T_{o} = 130\,^{\circ}F[/tex] and [tex]r = 0.2[/tex], then the formula for the object cooling is:

[tex]T(t) = 50 + 80\cdot e^{-0.2\cdot t}[/tex]

The formula for the object cooling is [tex]T(t) = 50 + 80\cdot e^{-0.2\cdot t}[/tex], where [tex]t[/tex] is in minutes.

Here is a question related to the Newton's Law of Cooling: https://brainly.com/question/13724658

Answer: 80.384 cubic cm /min

Explanation:

Let V denote the volume and r denotes the radius of the spherical snowball .

Given : [tex]\dfrac{dr}{dt}=-0.1\text{cm/min}[/tex]

We know that the volume of a sphere is given by :-

[tex]V=\dfrac{4}{3}\pi r^3[/tex]

Differentiating on the both sides w.r.t. t (time) ,w e get

[tex]\dfrac{dV}{dt}=\dfrac{4}{3}\pi(3r^2)\dfrac{dr}{dt}\\\\\Rightarrow\ \dfrac{dV}{dt}=4\pi r^2 (-0.1)=-0.4\pi r^2[/tex]

When r= 8 cm

[tex]\dfrac{dV}{dt}=-0.4(3.14)(8)^2=-80.384[/tex]

Hence, the volume of the snowball decreasing at the rate of 80.384 cubic cm /min.

The volume of the snowball is decreasing at a rate of 8.03 cubic cm per minute when the radius of the snowball is 8 cm.

The rate at which the volume of the spherical snowball is decreasing significantly depends on the rate of decrease in the sphere's radius. The volume formula of a sphere is V = 4/3πR³. With differentiation, volume change in the sphere over time, or dV/dt, can be represented as dV/dt = 4πR² * dR/dt. Plugging in the given values, dR/dt = -0.1 cm/min and R = 8cm, we find that dV/dt = -8.03 cm³/min. This indicates that the volume of the snowball is decreasing at a rate of 8.03 cm³/min. Remember, the answer is given as a positive number, i.e., without the negative sign, which represents a decrease.

https://brainly.com/question/29181502

#SPJ3

Answer:

Acceleration, [tex]a=\dfrac{1}{8}(-i+9j)\ m/s^2[/tex]

Explanation:

Initial velocity of a particle in vector form, u = (-5i - 2j) m/s

Final velocity of particle in vector form, v = (-6i + 7j) m/s

Time taken, t = 8 seconds

We need to find the magnitude of acceleration vector. The changing of velocity w.r.t time is called acceleration of a particle. It is given by :

[tex]a=\dfrac{v-u}{t}[/tex]

[tex]a=\dfrac{(-6i+7j)\ m/s-(-5i-2j)\ m/s}{8\ s}[/tex]    

[tex]a=\dfrac{(-i+9j)}{8\ s}\ m/s^2[/tex]    

or

[tex]a=\dfrac{1}{8}(-i+9j)\ m/s^2[/tex]

Hence, the value of acceleration vector is solved.

Answer:

option (D)

Explanation:

If we plot a graph between the velocity of the object and the time taken, the slope of graph gives the value of acceleration of the object and the area under the graph gives the product of velocity and time taken that means it is displacement

Answer:

D

Explanation:

Calculate v = (v + u) / 2. ...

Average velocity (v) of an object is equal to its final velocity (v) plus initial velocity (u), divided by two.

The average velocity calculator solves for the average velocity using the same method as finding the average of any two numbers. ...

Given v and u, calculate v. ...

Given v and v calculate u.

Answer is D