A spaceship moves radially away from Earth with acceleration 29.4 m/s 2 (about 3g). How much time does it take for sodium streetlamps (λ = 589 nm) on Earth to be invisible to the astronauts who look with a powerful telescope upon the city streets of Earth?

Answer:

Explanation:

Reaction force of inclined surface = mg cosθ

= Friction force acting in upward direction = μ x mg cosθ

If F be force required in upward direction to keep the block at rest on the plane

F +  μ x mg cosθ = mg sinθ

F = mg sinθ -  μ x mg cosθ

F = mg( sinθ - μ cosθ)

= 2 x 9.8 ( sin34 - 0.2 cos34 )

= 19.6 ( .559 - .1658)

= 7.7 N

This is the minimum force required .

The additional force that needs to be applied to keep a 2 kg block from sliding down a 34 degree incline, given a coefficient of static friction of 0.2, is 7.89 N.

To find out how much additional force, F, needs to be applied to keep the 2 kg block from sliding down the 34° incline, we first need to calculate the gravitational force pulling the block down the incline. This force is given by F_gravity = m * g * sin(theta), where m = 2 kg, g = 9.8 m/s² (roughly the acceleration due to gravity on Earth), and theta = 34 degrees. Thus, F_gravity = 2 kg * 9.8 m/s² * sin(34°) = 11.10 N.

Next, we calculate the static frictional force that is preventing the block from sliding down the incline. This force is given by F_friction = m * g * cos(theta) * mu_s, where mu_s = 0.2 is the coefficient of static friction. Thus, F_friction = 2 kg * 9.8 m/s² * cos(34°) * 0.2 = 3.21 N.

The additional force, F, that must be applied to keep the block from sliding down the incline is the difference between the gravitational force and the frictional force. That's F = F_gravity - F_friction = 11.10 N - 3.21 N = 7.89 N.

https://brainly.com/question/8693924

#SPJ3

Answer:

Explanation:

Given

Apparent  frequency [tex]f'=1370\ Hz[/tex]

Velocity of sound [tex]v=343\ m/s[/tex]

speed of observer [tex]v_o=35\ m/s[/tex]

Using Doppler effect Apparent frequency when source is approaching is given by

[tex]f'=f(\frac{v-v_0}{v-v_s})[/tex]

[tex]1370=f(\frac{343-35}{343-v_s})---1[/tex]

Apparent frequency when source moves away from observer

[tex]f''=f(\frac{v+v_0}{v+v_s})[/tex]

[tex]1330=f(\frac{343+35}{343+v_s})---2[/tex]

Divide 1 and 2 we get

[tex]\frac{f'}{f''}=\frac{\frac{343-35}{343-v_s}}{\frac{343+35}{343+v_s}}[/tex]

[tex]\frac{1370}{1330}=\frac{343-35}{343-v_s}\times \frac{343+v_s}{343+35}[/tex]

[tex]v_s=40\ m/s[/tex]

Thus speed of sound of police car is 40 m/s

The problem involves the Doppler effect and can be solved by applying the relevant formulas for when the source of sound is approaching and when it is receding. By setting up a system of two equations with the speed of the police car as the unknown, one can solve for it algebraically.

This is a classic problem related to the Doppler effect, which describes the change in frequency of a wave in relation to an observer moving relative to the source of the wave. It requires us to know some principles about sound waves, including that their speed in the medium is constant, and their frequency and wavelength are inversely proportional.

To solve the problem, we need to apply the formula of the Doppler effect both when the police car is approaching and when it is moving away. The formula for the perceived frequency (f) when the source is moving towards the observer in a medium, like air, is given by f = f0*(v + vo) / (v - vs), where f0 is the emitted frequency, v is the speed of the medium (sound in this case), vo is the observer's speed, and vs is the source's speed.

When the source (police car) is moving away, the formula differs slightly and is given by f = f0 * (v - vo) / (v + vs). Here, using the frequencies when the car was approaching (1370 Hz) and moving away (1330 Hz), along with your speed (35.0 m/s) and the speed of sound (343 m/s), we have two equations with vs (the speed of the police car) as the unknown. This system of equations can be solved algebraically, yielding the speed of the police car.

https://brainly.com/question/15318474

#SPJ11

Answer:

The direction of the magnetic field is in the  z-direction

Explanation:

Applying right hand rule, which states that when the thumb, index finger and the middle finger are held mutually at right angle to each other, with the index finger pointing in the direction of the moving charge (y- direction), the thumb pointing in the direction of the magnetic force (x-direction) pushing on the moving charge and then the middle finger pointing in the direction of the magnetic field (z-direction).

z direction.

Using John Ambrose Fleming's right hand rule which asks to position the middle finger, the thumb and the index finger as follows;

                                                 | thumb

                                                 |

                                                 |

index                                       |

                                                /

                                            /

                                        /

                                    /

                               middle

With this arrangement shown above, if you point your index finger in the direction in which the charge is moving, and then the middle finger in the direction of the magnetic field, then your thumb will point in the direction of the magnetic force.

For example;

If a charge is moving in the x direction, and the magnetic force is moving in the y direction, then the above figure is rotated to make sure that the index finger is pointing in the direction of the moving charge so as to get the direction of the magnetic field as follows;

                                                               y|       thumb (magnetic force)

                                                                 |

(direction of charge)                                |

index                     x                               |

                                                                /

                                                            /

                                                        /

                                                    / z

                               middle (direction of field)

Therefore, the magnetic field is in the z direction.

Now to the question, if the charge(electron) is moving in the y direction at right angles to a magnetic field and it experiences a magnetic field in the x direction, the diagram above can be rotated to depict this situation as follows;

                                                               y|       index (direction of charge)

                                                                 |

                                                                 |

                                                                  |                                 x

                                                                /                  thumb (direction of force)      

                                                            /

                                                        /

                                                    / z

                               middle (direction of field)

Therefore the magnetic field will move in the z direction.

Note:

i. For every rotation of right-hand, the index finger must always point in the direction of the charge.

ii. Since the question does not specify which direction the electron is moving in (whether positive or negative), the direction of the magnetic field (whether positive or negative) might not be determined either. But in either case, the field will move in the z direction.

Answer:

1/3

Explanation:

Take the displacement and divide it by the speed of light. Meters will cancel leaving you with seconds. :)

110m / 343m/s = 0.32069971 seconds or 1/3 seconds

The time elapses between when the sound reaches the nearest dancer and when it reaches the farthest dancer  1/3 second ( approx.). So, option (d) is correct.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Given The first dancer in the line is 10 m from the speaker playing the music; the last dancer in the line is 120 m from the speaker.

So, distance between the  first dancer in the line and the last dancer in the line be = 120 m -10 m = 110 m

Velocity of sound in air be = 343 m/s.

Hence, The time elapses between when the sound reaches the nearest dancer and when it reaches the farthest dancer = distance/velocity = 110/343 second = 1/3 second ( approx.).

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ2

Answer:

(b) 9m/s south

Explanation:

Case 1: A motorcycle has a velocity of 15 m/s, due south

Case 2: A car with a velocity of 24 m/s, due north.

Let the velocity of the car due south = Vs↓

Let the velocity of the car due north = Vn↑

Magnitude of the velocity of the motorcycle as seen by the driver of the car = V

V = Vn - Vs

  = 24m/s - 15m/s = 9m/s↓

The magnitude and velocity of of the motorcycle as seen by the driver of the car = 9m/s south

The correct option is B

e. 39 m/s, south

Let the velocity of the motorcycle be [tex]V_{M}[/tex]

Let the velocity of the car be [tex]V_{C}[/tex]

Let the velocity of the motorcycle relative to the car be = [tex]V_{MC}[/tex]

According to relativity of velocities in one dimension;

[tex]V_{MC}[/tex] = [tex]V_{M}[/tex] - [tex]V_{C}[/tex]       --------------------------(i)

Now, take;

south to be negative (-ve)                  

north to be positive (+ve)

Therefore, we can say that;

[tex]V_{M}[/tex] = -15m/s        [since the velocity is due south]

[tex]V_{C}[/tex] = +24m/s       [since the velocity is due north]

Now, substitute the values of [tex]V_{M}[/tex] and [tex]V_{C}[/tex] into equation (i) as follows;

[tex]V_{MC}[/tex] = -15 - (+24)

[tex]V_{MC}[/tex] = -15 -24

[tex]V_{MC}[/tex] = -39 m/s

Remember that we have taken;

south to be negative (-ve)                  

north to be positive (+ve)

Since the result we got is negative, it means the speed is due south.

Therefore, the speed of the motorcycle as seen by the driver of the car is 3.9m/s, due south.

Answer:

[tex]0.0110284391534\ N[/tex]

[tex]0.0653784219002\ N[/tex]

Explanation:

G = Gravitational constant = 6.67 × 10⁻¹¹ m³/kgs²

[tex]m_1[/tex] = Mass of sphere = 2000 kg

[tex]m_2[/tex] = Mass of other sphere = 2.1 kg

r = Distance between spheres

Force of gravity is given by

[tex]F=\dfrac{Gm_1m_2}{r^2}\\\Rightarrow F=\dfrac{6.67\times 10^{-11}\times 2000\times 2.1}{(5.04\times 10^{-3})^2}\\\Rightarrow F=0.0110284391534\ N[/tex]

The gravitational force is [tex]0.0110284391534\ N[/tex]

[tex]F=\dfrac{Gm_1m_2}{r^2}\\\Rightarrow F=\dfrac{6.67\times 10^{-11}\times 2000\times 2.1}{(2.07\times 10^{-3})^2}\\\Rightarrow F=0.0653784219002\ N[/tex]

The gravitational force is [tex]0.0653784219002\ N[/tex]

Answer

given,

height of the jump = 0.44 m

acceleration due to gravity, g = 9.8 m/s²

velocity at the height point = 0 m/s

initial speed = ?

Using equation of motion for speed calculation

v² = u² + 2 g h

0 = u² - 2 x 9.8 x 0.44

u = √8.624

u = 2.94 m/s

time taken to reach the highest point

v = u + g t

0 = 2.94 - 9.8 x t

t = 0.3 s

total time of flight will be equal to double of the time taken to reach the maximum height.

Total time = 2 x 0.3 = 0.6 s

A flea jumps straight up to a height of 0.440 m with an initial speed of 2.94 m/s and is in the air for 0.600 s.

A flea jumps straight up to a height (h) of 0.440 m. At the maximum height, the final speed (v) is zero. Given that the gravity (g) is 9.81 m/s², we can calculate the initial speed (u) using the following kinematic expression (We will assume y+ as the positive direction)

[tex]v^{2} = u^{2} + 2 \times g \times h \\\\(0m/s)^{2} = u^{2} + 2 \times (-9.81m/s^{2} ) \times 0.440m\\\\u = 2.94 m/s[/tex]

We can calculate the time (t) required to reach the maximum height using the following kinematic expression.

[tex]v = u + g \times t\\\\0m/s = 2.94m/s - 9.81m/s^{2} \times t\\\\t = 0.300 s[/tex]

The time in the air will be double the time to reach the maximum height.

[tex]t_{total} = 2 \times 0.300 s = 0.600 s[/tex]

A flea jumps straight up to a height of 0.440 m with an initial speed of 2.94 m/s and is in the air for 0.600 s.

Learn more: https://brainly.com/question/13027863

Using the principle of buoyancy and the ideal gas law equation, we can calculate the temperature needed inside a hot air balloon to provide the required lift. The maximum altitude of the balloon is limited by air temperature, pressure, and other environmental factors.

The principle of buoyancy used by hot air balloons to create lift is based on Archimedes' Principle, which states that the buoyant or lifting force exerted on a body immersed in a fluid equals the weight of the fluid the body displaces. In order for a hot air balloon to gain lift, the air inside the balloon must be heated to a temperature that makes it less dense than the surrounding cooler air. This difference in air density is what actually provides the uplift.

To calculate the required temperature inside the balloon, we can use the ideal gas law equation P₁V₁ / P₂V₂. Given the values in the question and the atmospheric pressure, we can derive the temperature inside the balloon required to provide the needed lift.

The maximum altitude attainable by a hot air balloon is limited by the ambient air temperature and pressure, which decrease as altitude increases. If the balloon's lift decreases (because it can no longer heat the air inside it sufficiently to provide lift), the balloon will stop ascending. Wind currents and weather conditions can also affect the maximum altitude.

https://brainly.com/question/26773934

#SPJ2

Answer:

Explanation:

given

spring constant k = 880 N/m

mass m = 150 kg

Normal force will be equal to the component of weight of mass m which is perpendicular to the inclined surface

= mgcosθ

So normal force

FN = mgcosθ j , as it acts in out of plane direction .

b )

Fricrion force acting in upward direction = μs mgcosθ

component of weight acting in downward direction = mgsinθ

restoring force by spring on block in downward direction

= kd

= 880d

F( total ) = (μs mgcosθ -  mgsinθ -  880d )i

c )  

for balance

mgsinθ =  kd

sinθ = kd / mg

= 880 x .1 / 150 x 9.8

= 88 / 1470

.0598

θ = 3.4 degree

d )

d = mgsinθ / k

150 x 9.8 sin45 / 880

= 1.18 m

The problem involves the equations of force related to a block on an inclined plane with a spring. The solution involves using concepts of statics, the restoring force of a spring, the force of gravity on an inclined plane and trigonometric functions to derive the formulas and find the answers.

Part (a) The normal force, FN, is the product of the gravitational motion and the cosine of the angle. Therefore, FN=mgcosθ.

Part (b) Just before the block begins to slide up the plane, the sum of the forces in the x-direction is equal to the difference between the restoring force of the spring and the force due to gravity along the plane. Therefore, ΣFx = k*d - mgsinθ.

Part (c) For a frictionless plane, the angle of the plane is found by observing that the force due to gravity must be equal to the restoring force of the spring, which gives θ = arcsin(k*d/(mg)). To get the angle in degrees for d = 0.1 m, you would plug in the values: θ = arcsin(880*0.1/(150*9.81)) in radians, and convert to degrees.

Part (d) If θ = 45 degrees and the surface is frictionless, the distance the spring will be compressed, d, can be found from the equation mg*sinθ = k*d, which gives d = m*g*sinθ/k. Substituting in these values, d = 150*9.81*sin(45)/880.

https://brainly.com/question/8693924

#SPJ5

Answer:

a) E = 3.99 × 10⁵J/mol = 3.99 × 10² KJ/mol = 399KJ = 400KJ/mol

b) E = 3.99 × 10⁴ J/mol = 3.99 × 10¹ KJ/mol = 39.9KJ/mol = 40 KJ/mol

c) E = (3.99 × 10^-10) J/mol = 3.99 × 10⁻⁷ KJ/mol

Explanation:

E = hf where E = energy, H = Planck's constant = 6.62607004 × 10⁻³⁴ J.s and f = 1/time period

a) Period = 1 fs = 1 × 10⁻¹⁵ s

f = 1/(10⁻¹⁵ ) = 10¹⁵ Hz

E = hf = 6.62607004 × 10⁻³⁴ × 10¹⁵ = 6.63 × ⁻10¹⁹ J = 6.63 × 10⁻¹⁶ KJ

In energy per mol, we multiply the energy with the avogadro's constant, 6.022 × 10²³ atoms/mol

E = 3.99 × 10⁵J/mol = 3.99 × 10² KJ/mol = 399KJ = 400KJ/mol

b) Period = 10 fs = 10 × 10⁻¹⁵ = 10⁻¹⁴ s

f = 1/period = 1/10⁻¹⁴ = 10¹⁴ Hz

E = hf = 6.62607004 × 10⁻³⁴ × 10¹⁴ = 6.63 × 10^-20 J = 6.63 × 10⁻¹⁷ KJ

In energy per mol, we multiply the energy with the avogadro's constant, 6.022 × 10²³ atoms/mol

E = 3.99 × 10⁴ J/mol = 3.99 × 10¹ KJ/mol = 39.9KJ/mol = 40 KJ/mol

c) Period = 1s

f = 1/period = 1.0 Hz

E = 6.62607004 × 10⁻³⁴ × 1 = 6.63 × 10⁻³⁴ J = 6.63 × 10⁻³¹ KJ.

In energy per mol, we multiply the energy with the avogadro's constant, 6.022 × 10²³ atoms/mol

E = (3.99 × 10^-10) J/mol = 3.99 × 10⁻⁷ KJ/mol

Answer:

(i) E =  6.626 X 10⁻¹⁹ J    = 400 KJ/mol

(ii) E = 6.626 X 10⁻²⁰ J   = 40 KJ/mol

(iii) E = 6.626 X 10⁻³⁴ J   = 4 X 10⁻¹³ KJ/mol

Explanation:

Energy associated with excitation of a quantum is given as;

E = hf

where;

E is the energy of excitation

h is Planck's constant = 6.626 X 10⁻³⁴Js⁻¹

f is the threshold frequency in s⁻¹

Thus, E = h/t

Part (i)

E = (6.626 X 10⁻³⁴)/(1 X 10⁻¹⁵)

E = 6.626 X 10⁻¹⁹ J  

In (KJ/mol) = 6.626 X 10⁻²² KJ X 6.022 X10²³ = 400 KJ/mol

Part (ii)

E = (6.626 X 10⁻³⁴)/(1 X 10⁻¹⁴)

E = 6.626 X 10⁻²⁰ J  

In (KJ/mol) = 6.626 X 10⁻²³ KJ X 6.022 X10²³ = 40 KJ/mol

Part (iii)

E = (6.626 X 10⁻³⁴)/(1)

E = 6.626 X 10⁻³⁴ J  

In (KJ/mol) = 6.626 X 10⁻³⁷ KJ X 6.022 X10²³ = 4 X 10⁻¹³ KJ/mol

the magnitude of the normal force is greater than the magnitude of the weight of the person

Explanation:

As the elevator moves down, there are two forces acting on the person:

- The weight of the person, [tex]W=mg[/tex], where m is the mass of the person and g the acceleration due to gravity, acting downward

- The normal reaction exerted by the floor of the lift on the person, N, acting upward

This means that Newton's second law can be written as

[tex]\sum F = N-W= ma[/tex] (1)

where we chose upward as positive direction, and a is the acceleration of the elevator.

Here we know that the elevator is moving downward and it is slowing down: this means that the velocity is negative (upward), and the acceleration is in the opposite direction (upward), so the acceleration is positive.

Eq.(1) can be rewritten as

[tex]N=W+ma[/tex]

and as we said that [tex]a>0[/tex], this means that

[tex]N>W[/tex]

So the magnitude of the normal force is greater than the magnitude of the weight of the person.

Learn more about forces and weight:

brainly.com/question/8459017

brainly.com/question/11292757

brainly.com/question/12978926

#LearnwithBrainly

The magnitude of the normal force on a person in a downward-slowing elevator is greater than the magnitude of the weight force.

When a person is standing in an elevator that is moving downward and slowing down, the magnitude of the normal force on the person is greater than the magnitude of the weight force on the person.

According to Newton's third law, the normal force and the weight force are equal in magnitude and opposite in direction. In this case, since the elevator is moving downward and slowing down, the acceleration of the person is in the upward direction. Therefore, the normal force exerted by the floor of the elevator on the person must be greater than the weight force in order to cause the upward acceleration.

It is important to note that if the elevator is in free-fall and accelerating downward at the acceleration due to gravity, the normal force becomes zero and the person appears to be weightless.

Answer:

17 hours

Explanation:

k = Thermal conductivity of concrete = 1.1 W/m°C

A = Area = [tex]8.9\ m^2[/tex]

l = Thickness = 0.18 m

[tex]\Delta T[/tex] = Change in temperature = 20.8-10.1

Power is given by

[tex]P=\dfrac{kA\Delta T}{L}\\\Rightarrow P=\dfrac{1.1\times 8.9\times (20.8-10.1)}{0.18}\\\Rightarrow P=581.961\ W[/tex]

Time required to produce 1 kWh

[tex]t=\dfrac{3600\times 10^3}{581.961}\\\Rightarrow t=6185.98153485\ s[/tex]

For one dollar

[tex]t=\dfrac{6185.98153485}{0.1}\\\Rightarrow t=61859.8153485\ s\\\Rightarrow t=\dfrac{61859.8153485}{60\times 60}\\\Rightarrow t=17.1832820412\ hours[/tex]

The time taken is 17 hours

Answer:

0.015%

Explanation:

Data provided in the question:

Length by which the measuring tape can be off, δL = 0.42 cm

Total measured length for which Error of  δL is observed, L = 28 m  

Now,  

we know,  

1 m = 100 cm  

Thus,

28 m = 28 × 100 = 2800 cm

Percent uncertainty = [δL ÷ L] × 100%

= [0.42  ÷ 2800] × 100%

= 0.015%

The film thickness needs to be increased by C. λfilm/2 to achieve destructive interference.

When light reflects off a thin film, it can undergo constructive or destructive interference depending on the thickness of the film and the wavelength of the light. For constructive interference, the path difference between the reflected rays should be an integer multiple of the wavelength, while for destructive interference, the path difference should be an odd multiple of half the wavelength.

Interference in thin films is a phenomenon where light waves reflect off both the top and bottom surfaces of a thin film, leading to constructive or destructive interference patterns, creating colors. Therefore, to achieve destructive interference, the film thickness needs to be increased by λfilm/2. Thus, the correct answer is option C.

https://brainly.com/question/33710977

#SPJ12

To switch from constructive to destructive interference, the film thickness must be increased by λ[tex]_f_i_l_m[/tex]/2.

In thin film interference, the thickness of the film and the wavelength of light are crucial in determining whether the interference is constructive or destructive. Constructive interference happens when the path length difference for the two reflected rays is an integral multiple of the wavelength inside the film (i.e., 2t = nλ[tex]_f_i_l_m[/tex], where n is an integer). Conversely, destructive interference occurs when this path length difference is a half-integral multiple of the wavelength (i.e., 2t = (2n + 1)λ[tex]_f_i_l_m[/tex] / 2).

Given that the film currently gives constructive interference for a wavelength of λ[tex]_f_i_l_m[/tex], the path length difference is an integral multiple of λ[tex]_f_i_l_m[/tex]. To switch to destructive interference, the thickness must be increased so the total path length difference becomes a half-integral multiple of λ[tex]_f_i_l_m[/tex]. This increase should be λ[tex]_f_i_l_m[/tex]/2.

The film thickness would need to be increased by λ[tex]_f_i_l_m[/tex]/2 to give destructive interference.

The displacement of the airplane is 6760 meters, its average velocity is 43.33 m/s, and its average speed is 135.08 m/s.

To solve this problem, we need to apply the principles of physics in kinematics and circular motion. First of all, let's understand that displacement is the shortest distance the airplane covered, which is the diameter of the circle. We multiply the radius by 2 (2*3.38 km) and convert it to meters to give 6760 meters for part (a).

Next, for average velocity, which is displacement over time, we divide 6760 m by 156 s, yielding approximately 43.33 m/s for part (b).

Lastly, for average speed, we need to consider the total distance travelled. In half a circle, this is pi times the diameter. Therefore, the average speed is (3.14 * 6760 m) / 156 = 135.08 m/s for part (c).

https://brainly.com/question/7590442

#SPJ12

The magnitude of the airplane's displacement is 6760 m. The magnitude of the average velocity is 43.33 m/s, and the average speed is 67.97 m/s.

Let's break down the problem step-by-step to find the required values.

(a) Magnitude of the Airplane's Displacement:

The airplane flies half of the circle, which means the path is a semicircle. The displacement is the straight-line distance between the start and end points of this path, which is the diameter of the circle.

Radius of the circle, [tex]r = 3.38 km = 3380 m[/tex]
Diameter, [tex]d = 2 * r = 2 * 3380 m = 6760 m[/tex]

Therefore, the magnitude of the displacement is 6760 m.

(b) Magnitude of the Average Velocity:

Average velocity is the displacement divided by the time.

Displacement = 6760 m
Time, [tex]t = 156 s[/tex]

Average velocity, [tex]v_{avg} = Displacement / Time = 6760 m / 156 s = 43.33 m/s[/tex]

Therefore, the magnitude of the average velocity is 43.33 m/s.

(c) Airplane's Average Speed:

The average speed is the total distance traveled along the path divided by the time.

The distance traveled in half a circle is the circumference of the semicircle.

[tex]Distance = (\pi * Diameter) / 2 = (\pi * 6760 m) / 2 = 10602.91 m[/tex]

[tex]Average speed = Distance / Time = 10602.91 m / 156 s = 67.97 m/s[/tex]

Therefore, the airplane's average speed is 67.97 m/s.

a) The average true power is 318.3 W

b) The reactive power is 132.6 W

c) The apparent power is 344.8 W

d) The power factor is 0.92

Explanation:

a)

For a circuit made of a resistor and a capacitor, the average (true) power is given by the resistive part of the circuit only.

Therefore, the average true power is given by:

[tex]P=I^2R[/tex]

where

I is the current

R is the resistance

In this problem, we have

V = 67 V (rms voltage)

[tex]R=12 \Omega[/tex] is the resistance of the load

[tex]X=5\Omega[/tex] is the reactance of the circuit

First we have to find the impedance of the circuit:

[tex]Z=\sqrt{R^2+X^2}=\sqrt{12^2+5^2}=13 \Omega[/tex]

Then we can find the current in the circuit by using Ohm's law:

[tex]I=\frac{V}{Z}=\frac{67}{13}=5.15 A[/tex]

Therefore, the average true power is

[tex]P=I^2R=(5.15)^2(12)=318.3 W[/tex]

b)

The reactive power of a circuit consisting of a resistor and a capacitor is the power given by the capacitive part of the circuit.

Therefore, it is given by

[tex]Q=I^2X[/tex]

where

I is the current

X is the reactance of the circuit

In this circuit, we have

[tex]I=5.15 A[/tex] (current)

[tex]X=5 \Omega[/tex] (reactance)

Therefore, the reactive power is

[tex]Q=(5.15)^2(5)=132.6W[/tex]

c)

In a circuit with a resistor and a capacitor, the apparent power is given by both the resistive and capacitive part of the circuit.

Therefore, it is given by

[tex]S=I^2Z[/tex]

where

I is the current

Z is the impedance of the circuit

Here we have

I = 5.15 A (current)

[tex]Z=13 \Omega[/tex] (impedance)

Therefore, the apparent power is

[tex]S=I^2 Z=(5.15)^2(13)=344.8 W[/tex]

d)

For a circuit with a resistor and a capacitor, the power factor is the ratio between the true power and the apparent power. Mathematically:

[tex]PF=\frac{P}{S}[/tex]

where

P is the true power

S is the apparent power

For this circuit, we have

P = 318.3 W (true power)

S = 344.8 W (apparent power)

So, the power factor is

[tex]PF=\frac{318.3}{344.8}=0.92[/tex]

Learn more about power and circuits:

brainly.com/question/4438943

brainly.com/question/10597501

brainly.com/question/12246020

#LearnwithBrainly

Answer: Meteor showers occur when the earth in its orbit around the Sun passes through debris left over from the destruction of comets.

Explanation:A meteor is a particle broken off an asteroid or comet orbiting the Sun, it burns up as it enters the Earth's atmosphere, creating the effect called shooting star. Cosmic debris of meteor is known as meteoroids. These meteoroids, entering Earth's atmosphere, at extremely high speeds on parallel trajectories is an event known as meteor shower.

Explanation:

It is known that the molecular weight of ammonia ([tex]NH_{3}[/tex]) is as follows.

   Molecular weight ([tex]NH_{3}[/tex]) = [tex]14 + 3 \times 1[/tex] = 17

(a)   Therefore, we will calculate the mass as follows.

     [tex]0.5 kmol \times (\frac{1000 mol}{1 kmol}) \times (\frac{17 g}{1 mol})[/tex]

                       = 8500 g

Now, formula to calculate weight of the system in N is as follows.

            Weight = mass × g

             = [tex]8500 g \times (\frac{1 kg}{1000 g}) \times (9.8 m/s^{2})[/tex]

             = 83.3 N     (1 [tex]kg m/s^{2}[/tex] = 1 N)

Hence, the weight of the system is 83.3 N.

(b)   Relation between specific volume and number of moles is as follows.

            [tex]v (m^{3}/kmol) = \frac{V}{n}[/tex]

Therefore, calculate the specific volume as follows.

       [tex]V_m = \frac{6 m^{3}}{0.5 k mol}[/tex]

                   = 12 [tex]m^{3}/k mol[/tex]

Also,  

               [tex]v (m^{3}/kmol) = \frac{V}{m}[/tex]  

            v = [tex]\frac{6 m^{3}}{8.5 kg}[/tex]

               = 0.705882 [tex]m^{3}/kg[/tex]

Therefore, we can conclude that the value of specific volume is 12 [tex]m^{3}/k mol[/tex]  and 0.705882 [tex]m^{3}/kg[/tex].

Answer:

a) [tex]w=83.385\ N[/tex]

b) [tex]\bar V=12\ m^3.kmol^{-1}[/tex]

[tex]\b V=0.7059\ m^3.kg^{-1}[/tex]

Explanation:

Given:

no. of moles of ammonia in a closed system, [tex]n=0.5\ kmol=500\ mol[/tex]

volume of ammonia, [tex]V=6\ m^3[/tex]

We  know the molecular formula of ammonia: [tex]NH_3[/tex]

The molecular mass of ammonia:

[tex]M=14+3\times 1=18\ g.mol^{-1}[/tex]

Now the mass of given ammonia:

[tex]m=n.M[/tex]

[tex]m=500\times 17[/tex]

[tex]m=8500\ g=8.5\ kg[/tex]

a)

Now weight:

[tex]w=m.g[/tex]

[tex]w=8.5\times 9.81[/tex]

[tex]w=83.385\ N[/tex]

b)

Specific volume:

[tex]\bar V=\frac{6}{0.5}[/tex]

[tex]\bar V=12\ m^3.kmol^{-1}[/tex]

also

[tex]\b V=\frac{V}{m}[/tex]

[tex]\b V=\frac{6}{8.5}[/tex]

[tex]\b V=0.7059\ m^3.kg^{-1}[/tex]

Answer:

a) The positive plate is at a higher potential than the negative plate.

b) Electric field between the plates = 5.76 KV/m

Explanation:

a) The positive plate is at a higher potential than the negative plate because of convention. We could define the negative plate to be "high potential." However, that convention has to be consistent. The positive plate is at the high potential, and that potential causes positive charges to flow from high potential to low potential. If we had defined the convention in the other direction, then the negative terminal would be the high potential, and that potential would cause negative charges to flow from high potential to low potential.

b) Electric field, E = potential difference across plate/distance or separation between the plates

E = V/d

V = 490V, d = 8.5cm = 0.085m

E = 490/0.085 = 5,764.706 V/m = 5.76 KV/m

Hope this helps!!!

Answer:

average speed = 0.146 m/s

Explanation:

given data

distance = 30600 km

time = January 26, 1977 to September 18, 1983

solution

we get here time that is January 26, 1977 to September 18, 1983

so it is = 6 year and 7 months and 22 days

and  that is = 2422 days = 2.09 × [tex]10^{8}[/tex] seconds

and distance is = 30600 km = 30600 × 10³ m

so here average speed will be as

average speed = [tex]\frac{distance}{time}[/tex]        ...........1

average speed = [tex]\frac{30600*10^3}{2.09*10^8}[/tex]

average speed = 0.146 m/s

Final answer:

Upon removing 12000 electrons from a neutral balloon, it will acquire a positive charge of 1.92 microcoulombs (1.92 µC). This is calculated by multiplying the number of electrons by the elemental charge and converting to the appropriate unit.

Explanation:

When 12000 electrons are removed from a neutral balloon, it obtains a positive charge because electrons carry a negative charge. To determine the charge the balloon now carries, we multiply the number of electrons removed by the elementary charge of an electron.

The charge (Q) on the balloon can be calculated using the formula:

Q = n × e

Where:

Let's plug in the values into the formula:

Q = 12000 × 1.6 × 10⁻¹⁹ C

Q = 1.92 × 10⁻¹⁵ C

Converting coulombs (C) to microcoulombs (µC) by multiplying by 10¶ gives:

Q = 1.92 × 10⁻¹⁵ C × 10¶ µC/C

Q = 1.92 µC

The balloon will carry a charge of 1.92 µC after 12000 electrons have been removed.

Answer:

Final velocity will be equal to 0.321 m/sec

Explanation:

We have given mass of clay model of lion [tex]m_1=0.225kg[/tex]

Its speed is 0.85 m/sec, so [tex]v_1=0.85m/sec[/tex]

Mass of another clay model [tex]m_2=0.37kg[/tex]

It is given that second clay is motionless

So its velocity [tex]v_2=0m/sec[/tex]

Now according to conservation of momentum

Momentum before collision will be equal to momentum after collision

So [tex]m_1v_!+m_2v_2=(m_1+m_2)v[/tex], here v is velocity after collision

So [tex]0.225\times 0.85+0.37\times 0+(0.225+0.37)v[/tex]

[tex]0.595v=0.191[/tex]

v = 0.321 m/sec

So final velocity will be equal to 0.321 m/sec  

Answer:

See explanation below.

Explanation:

For this case we have the following function:

[tex] x(t)= ct^4 +dt^2 +f[/tex]

Where [tex] c= 6 m/s^4 , d = 8m/s^2 , f=-6m [/tex]

If we replace those values we got:

[tex] x(t) = 6t^4 + 8t^2 -6[/tex]

If we want to find the position after t = 2.358 seconds for example we ust need to replace in the position function t = 2.358 and we got:

[tex] x(t=2.358) = 6(2.358)^4 + 8(2.358)^2 -6 \approx 224 m[/tex]

If we want to find the velocity we need to take the derivate of the position function and we got:

[tex] \frac{dx}{dt}=v(t) = 4ct^3 + 2dt[/tex]

[tex] v(t)= 24 t^3 + 16 t[/tex]

If we want to find the instantaneous velocity we just need to replace on v(t) a value for t

And the accelaration would be given by the second derivate of the position:

[tex] \frac{dv}{dt}= 72 t^2[/tex]

If we want to find the instantaneous acceleration we just need to replace on v(t) a value for t

Final answer:

Explaining the position function of a particle in meters at a given time using a specific function with provided values for constants.

Explanation:

Position Function: The position of a particle in meters at time 't' is described by the function x(t) = ct² + dt² + f, with given values for c, d, and f.

Explanation: To find the position of the particle using this function, substitute the values of c, d, f, and the specific time 't'. This will give you the position of the particle at that time.

Example: If c = 6m/s², d = 8m/s², f = -6m, and t = 2s, then you can plug in these values to find the position of the particle at t = 2s.

Answer:

u= 29.43 m/s

h=44.14 m

Explanation:

Given that

t= 3 s

We know that acceleration due to gravity ,g = 9.81 m/s² (Downward)

Initial velocity  = u

Final velocity ,v= 0 (At maximum height)

We know v = u +a t

v=final velocity

u=initial velocity

a=Acceleration

Now by putting the values in the above equation

0 = u - 9.81 x 3

u= 29.43 m/s

The maximum height h is given as

v² = u ² -  2 g h

0² = 29.43 ² - 2 x 9.81 x h

[tex]h=\dfrac{29.43^2}{2\times 9.81}\ m[/tex]

h=44.14 m

Answer:

option C

Explanation:

Given,

Change on the capacitor = Q

Separation is doubled

Energy stored in the capacitor,E = ?

we know,

[tex]E = \dfrac{Q^2}{2C}[/tex]

and [tex]C = \dfrac{\epsilon_0A}{d}[/tex]

now,

[tex]E = \dfrac{Q^2}{2\epsilon A}\ d[/tex].......(1)

where d is the separation between the two plates.

now, when the separation is doubled

[tex]E' = \dfrac{Q^2}{2\epsilon A}\ (2d)[/tex]

[tex]E' = 2(\dfrac{Q^2}{2\epsilon_0 A}\ d)[/tex]

From equation (1)

  E' = 2 E

Hence, the energy stored in the capacitor is doubled if the separation is increased.

The correct answer is option C.

Answer:

[tex]w=\sqrt{\frac{k}{m} }[/tex]

b. [tex]5.6rad/s[/tex]

Explanation:

a. from the spring-mass system which is explicitly describe by hooks law

from

F=-kx

which is in comparison to newtons general law of motion

F=ma

where the displacement x is expressed as

[tex]x=Asin(wt)\\[/tex]

and the acceleration is the second derivative of the displacement

[tex]a=-Aw^{2}sin(wt)\\[/tex]

hence final expression after substituting for the acceleration and the displacement  is expressed as

[tex]w=\sqrt{\frac{k}{m} }[/tex]

b. for k=105N/m and m=3.4kg

we have the angular frequency to be

[tex]w=\sqrt{\frac{105}{3.4}}\\\\w=5.6rad/s[/tex]

Final answer:

The angular frequency (ω) can be found using the formula ω = sqrt(k/m). By plugging in the given values of mass (3.4 kg) and spring constant (105 N/m), the angular frequency is calculated to be approximately 5.56 rad/s.

Explanation:

The subject question pertains to simple harmonic motion (SHM) and specifically relates to the oscillatory motion of a mass attached to a horizontal spring. The question involves determining the angular frequency and calculating it in radians per second.

Part (a)

To write an equation for the angular frequency (ω) of the oscillation, we use the equation:

ω = sqrt(k/m)

where ω is the angular frequency, k is the spring constant, and m is the mass.

Part (b)

Plugging in the given values:

m = 3.4 kg

k = 105 N/m

We find ω using the formula:

ω = sqrt(105 N/m / 3.4 kg) = sqrt(30.8824 s-2) ≈ 5.56 rad/s

Therefore, the angular frequency of the oscillation is approximately 5.56 rad/seconds.

Answer:

25.52 m

Explanation:

Relative speed between the person and I would be the difference of our speeds

[tex]v_r=2.85-1.09=1.76\ m/s[/tex]

Time taken by me to walk up to the person = 14.5 s

Distance is given by

[tex]Distance=Speed\times Time\\\Rightarrow s=vt\\\Rightarrow s=1.76\times 14.5\\\Rightarrow s=25.52\ m[/tex]

The person was 25.52 m ahead of me when I started running

Answer:

v = 30.15 m/s

a = 60.07 m/s2

Explanation:

Velocity is derivative of position with respect to time

[tex]v_x = x' = 3*0.25t^2 = 0.75t^2[/tex]

[tex]v_z = z' = 5*0.75t^4/2 = 1.875t^4[/tex]

Acceleration is derivative of velocity with respect to time

[tex]a_x = v_x' = 2*0.75 t = 1.5t[/tex]

[tex]a_z = v_z' = 4*1.875t^3 = 7.5t^3[/tex]

At t = 2 seconds

[tex]v_x = 0.75*2^2 = 3m/s[/tex]

[tex]v_z = 1.875*2^4 = 30m/s[/tex]

[tex]v = \sqrt{v_x^2 + v_z^2} = \sqrt{3^2 + 30^2} = \sqrt{909} = 30.15 m/s[/tex]

[tex]a_x = 1.5*2 = 3 m/s^2[/tex]

[tex]a_z = 7.5*2^3 = 60 m/s^2[/tex]

[tex]a = \sqrt{a_x^2 + a_z^2} = \sqrt{3^2 + 60^2} = \sqrt{3609} = 60.07 m/s[/tex]

Answer:

Average speed of the car will be 27.582 km/hr

Explanation:

We have given that in first 5 minutes distance traveled by car is 2 miles

After 14 minutes it has travel 4.5 miles

And finally after 21 minutes distance traveled by car is 6 miles

So total time of traveling t = 21 minutes

As we know that 1 hour = 60 minutes

So 21 minutes [tex]=\frac{21}{60}=0.35hour[/tex]

Total distance traveled = 6 miles

As 1 miles = 1.609 km

So 6 miles [tex]=6\times 1.609=9.654km[/tex]

Average speed is equal to the ratio of total distance and total time

So average speed [tex]v=\frac{9.654}{0.35}=27.582km/hr[/tex]

Answer:

Explanation:

One end of a string 5.02 m long is moved up and dowBDBBn with simple harmonic motion at a frequency of 61 Hz . The waves reach the other end of the string in 0.5 s. Find the wavelength of the waves on the string. Answer in units of cm

The wavelength of the waves on the string is calculated using the wave speed (found by distance/time) and the frequency. After performing the calculations, the wavelength is determined to be 16.46 cm.

To calculate the wavelength of the waves on the string, we can use the wave speed and the frequency. The speed of a wave ( is given by the formula speed = distance / time. Here, the distance is the length of the string, and the time is how long it takes for waves to reach the other end.

The speed of the wave is therefore 5.02 m / 0.5 s = 10.04 m/s. The frequency of the wave is given as 61 Hz. The wavelength ( can be found using the equation v = f, where v is the wave speed, f is the frequency, and  is the wavelength.

By rearranging the equation to solve for the wavelength, we get
= v / f. Substituting the given values, we find
= 10.04 m/s / 61 Hz
= 0.1646 m. To convert the wavelength into centimeters, we multiply by 100, which gives us a wavelength of 16.46 cm.