A shoreline runs north-south, and a boat is due east of the shoreline. The bearings of the boat from two points on the shore are 110° and 100°. Assume the two points are 550 ft apart. How far is the boat from the shore?

Answer:

Based on the data thomson collected in his experiments using cathode rays, the concept of atomicc structure was modified. What were the four things validated by his cathode ray expirement?

Explanation:

Cathode Ray tubes' Experiment of J.J. Thomson, showed that atoms contain  electrons or tiny negative charged subatomic particles.

Based on the Thomson's cathode ray tubes experiment, He validated four things which are as following

1. Cathode rays have mass.

2. Matter contains positive and negative charge.

3. Particles of cathode rays are fundamental to all matter.

4. An atom is divisible.  

Answer:

a) v(2) = 2m/s, v(3) = -2m/s

b) speed at t = 2s is 2m/s

speed at t = 3s is 2m/s

c) 0 m/s

Explanation:

We can take the derivative of x(t) to find the equation of velocity

v(t) = x'(t) = 10 - 4t

(a) v(2) = 10 - 4*2 = 10 - 8 = 2 m/s

v(3) = 10 - 4*3 = 10 - 12 = -2 m/s

(b) The speed would be the same as velocity without the direction

speed at t = 2s is 2m/s

speed at t = 3s is 2m/s

(c) The average velocity between t = 2s and t = 3s is distance it travels over period of time

[tex]v_a = \frac{s(3) - s(2)}{\Delta t} = \frac{10*3 - 2*3^2 - (10*2 - 2*2^2)}{3 - 2}[/tex]

[tex]v_a = \frac{12 - 12}{1} = 0/1 = 0 m/s[/tex]

Final answer:

The instantaneous velocity at t = 2 s is 2 m/s and at t = 3 s is -2 m/s. The instantaneous speed at both times is 2 m/s. The average velocity between t = 2 s and t = 3 s is 12 m/s.

Explanation:

(a) To find the instantaneous velocity, we need to find the derivative of the position function x(t) with respect to time. The derivative of x(t) = 10t - 2t² is v(t) = 10 - 4t. Substituting t = 2 and t = 3 into v(t), we get v(2) = 10 - 4(2) = 2 m/s and v(3) = 10 - 4(3) = -2 m/s.

(b) The instantaneous speed is the magnitude of the instantaneous velocity. Since speed is always positive, the speed at t = 2 s and t = 3 s is 2 m/s for both.

(c) The average velocity between t = 2 s and t = 3 s is given by the change in position divided by the change in time. The change in position is x(3) - x(2) = (10(3) - 2(3)²) - (10(2) - 2(2)²) = 12 m, and the change in time is 3 s - 2 s = 1 s. Therefore, the average velocity is 12 m/1 s = 12 m/s.

The primary current for the given transformer is 3 A which is determined by considering the principle of a transformer, the turns ratio and the law of conservation of power, and calculating secondary current using Ohm's law.

To find the primary current of a transformer, we need to first understand the principle of a transformer. A transformer operates on the electromagnetic induction principle, and the ratio of turns in the primary and secondary coil determines how much voltage is changed. In your transformer, the primary voltage is 240 V and the secondary voltage is 60 V. Therefore, the turns ratio is 240/60 which gives a value of 4.

Now, considering the law of conservation of power in an ideal transformer, the power output is equal to the power input. Power is given by the product of voltage and current.

So, primary voltage (V1) times primary current (I1) is equal to secondary voltage (V2) times secondary current (I2). The secondary current (I2) can be calculated using Ohm's law as V2/R, where R is the resistance of the load connected. Plugging in the given values we get

I2 = 60/5 = 12 A.

Now, substituting the known variables in the power conservation equation we get

240*I1 = 60*12.

Solving for I1 gives a value of 3A.

Therefore, the primary current for the given transformer is 3 A.

https://brainly.com/question/31663681

#SPJ3

Final answer:

The detailed response covers the maximum height reached by the egg, the time it takes to hit the ground, and its velocity just before landing.a)60.0m,b)2.45 seconds,c)-6.0m/s.

Explanation:

a) Maximum Height: The maximum height above the ground reached by the egg can be calculated using the kinematic equation. It will be twice the initial height. In this case, it would be 60.0m.

b) Time to Hit Ground: You can determine the time it takes for the egg to hit the ground by using the kinematic equation for vertical motion. The time would be approximately 2.45 seconds after its release.

c) Velocity Before Landing: The velocity of the egg immediately before hitting the ground would be the same as the initial velocity when it was thrown, but in the opposite direction, which is -6.0m/s.

Juanita did more work on the square box

Explanation:

According to the law of conservation of energy, the work done in lifting an object is equal to the increase in gravitational potential energy of the object. This is due to the fact that the work done on the object is converted into potential energy.

The potential energy of an object (GPE) is given by

[tex]GPE=mgh[/tex]

where

m is the mass of the object

g is the acceleration of gravity

h is the height of the object

In this problem, we have two objects:

- The roud box is lifted and its GPE increases by 50 J --> this means that the work done by Juanita on the box is 50 J

- Thr square box is lifted and its GPE increases by 100 J --> this means that the work done by Juanita on the box is 100 J

Therefore, Juanita did more work on the square box.

Learn more about work and potential energy:

brainly.com/question/6763771

brainly.com/question/6443626

brainly.com/question/1198647

brainly.com/question/10770261

#LearnwithBrainly

The square box received more work by Juanita than the round box based on the increase in gravitational potential energy.

The square box received more work done by Juanita compared to the round box. When the gravitational potential energy increase for the square box is 100 J, which is greater than the 50 J increase in the round box, it indicates that Juanita did more work on the square box.

Answer:

DUNNO

Explanation:

BIT BAD FOR 65% WOULD GET -100%

Answer:

1.19×10²² m/s

Explanation:

Kinetic Energy: This can be defined as the the energy of a body due to motion.

The formula for kinetic energy is given as,

Ek = 1/2mv²................... Equation 1

Where Ek = Kinetic energy, m = mass of proton. v = velocity of proton.

Making v the subject of the equation,

v = √(2Ek/m).................. Equation 2.

Given: Ek = 0.995×10⁻⁵ J, m = 1.673×10⁻²⁷ kg.

Substitute into equation 2

v = √(2×0.995×10⁻⁵/1.673×10⁻²⁷ )

v = 1.19×10²² m/s.

Therefore, the velocity of proton = 1.19×10²² m/s

Answer:

Gravitational potential energy

Explanation:

Gravitational potential energy is the type of energy an object has due to its position in a gravitational field. Water behind a dam possesses gravitational potential energy due to it being at a higher level than the water on the other side of the dam. When the water falls the gravitational potential energy is converted to kinetic energy, leading to the turning of the turbines to generate electricity.

Answer:

Approximately 500kJ

Explanation:

According to the law of conservation of energy which states that energy can neither be created nor destroyed but can be converted from one form to another.

A parachutist jumping out of the airplane covering a particular height and under the influence of gravity will possess potential energy during fall. Since PE = mass × acceleration due to gravity × height

PE = 39.4×1340×9.8

PE = 501,562Joules

If the body lands on the ground with a speed of 5.78m/s, this means the body possesses kinetic energy at the point of landing. The kinetic energy on landing is 1/2mv²

KE = 1/2×39.4×5.78²

KE = 658.14Joules

The amount of energy lost due to friction will be PE-KE

= 501,562-658.14

= 500,903Joules approximately 500kJ

Final answer:

The solution involves calculating the parachutist's initial potential energy and final kinetic energy, then finding the difference to determine the energy lost to air friction during the jump.

Explanation:

The question asks how much energy was lost to air friction during the jump of a parachutist who has a mass of 39.4 kg, jumps from a height of 1340 m, and lands with a speed of 5.78 m/s. To find the energy lost to air friction, we first calculate the potential energy at the start and the kinetic energy at the end of the jump, then find the difference.

Initial potential energy (PE_initial) is given by mgh, where m is mass, g is acceleration due to gravity (9.8 m/s²), and h is height. Therefore, PE_initial = 39.4 kg * 9.8 m/s² * 1340 m.

Final kinetic energy (KE_final) is given by 1/2 mv², where m is mass and v is velocity at landing. Thus, KE_final = 1/2 * 39.4 kg * (5.78 m/s)².

The energy lost to air friction equals the initial potential energy minus the final kinetic energy. Subtracting KE_final from PE_initial gives the amount of energy lost to air resistance.

Answer: The answer is attached

Explanation:

Final answer:

In quantum mechanics, the probability of a spin-flip and the potential for achieving a spin flip with certainty are explored through the application of magnetic fields in different directions.

Explanation:

P(a): The probability that the spin-flip would occur can be calculated using quantum mechanics. When applying magnetic fields B along x and y, the probability of finding the spin of the electron oriented in the negative z-direction after is over is determined by the transition probabilities.

P(b): The time to ensure a spin flip with certainty (P = 1) can be calculated by adjusting the duration of the magnetic field application. By manipulating the duration, the spin can be controlled to achieve a certain outcome at a specific time.

Answer:e

Explanation:

Given

Area of parallel plates is A

distance between plates is d

Potential difference between Plates is V

Capacitance is given by

[tex]C=\frac{\epsilon _0A}{d}[/tex]

If separation is doubled then capacitance become half

[tex]C'=\frac{\epsilon _0A}{2d}[/tex]

[tex]C'=\frac{C}{2}[/tex]

Electrical energy stored in the capacitor is given by

[tex]E=\frac{1}{2}CV^2[/tex]

When distance is doubled

[tex]E'=\frac{1}{2}\times \frac{C}{2}\times V^2[/tex]

[tex]E'=\frac{E}{2}[/tex]      

Therefore Energy is halved

If the separation between the plates is doubled, the electrical energy stored in the capacitor will be: d. The electrical energy stored in the capacitor will be quartered.

To understand why the energy stored in the capacitor is quartered when the separation between the plates is doubled, let's consider the formula for the capacitance of a parallel plate capacitor and the energy stored in a capacitor.

 The capacitance C of a parallel plate capacitor is given by:

[tex]\[ C = \frac{\varepsilon_0 A}{d} \][/tex]

The energy U stored in a capacitor is given by:

[tex]\[ U = \frac{1}{2} C V^2 \][/tex]

[tex]\[ C' = \frac{\varepsilon_0 A}{2d} = \frac{1}{2} \frac{\varepsilon_0 A}{d} = \frac{1}{2} C \][/tex]

[tex]\[ U' = \frac{1}{2} C' V^2 = \frac{1}{2} \left(\frac{1}{2} C\right) V^2 = \frac{1}{4} C V^2 = \frac{1}{4} U \][/tex]

So, when the separation between the plates is doubled, the capacitance is halved, and since the energy is directly proportional to the capacitance, the energy stored in the capacitor is quartered.

Answer:

the new volume =93,750 Liters

Explanation:

From Boyles law

P1V1 = P2V2

1.2 X 125000 = 1.6 X V2

V2 = 93,750 Liters

Answer:

a.-6.75 kgm/s

b.[tex]3375 N[/tex]

Explanation:

We are given that

Mass of baseball=0.15 kg

Initial speed=[tex]u=20m/s[/tex]

Final speed=[tex]v=-25m/s[/tex]

a.We know that

Impulse=Change in momentum=[tex]\Delta p=mv-mu=m(v-u)[/tex]

Momentum=[tex]mass\times velocity[/tex]

Using the formula

Impulse=[tex]0.15(-25-20)=-6.75 kgm/s[/tex]

b.Time=[tex]2\times 10^{-3} s[/tex]

Force=[tex]\frac{Impulse}{time}[/tex]

Using the formula

Average force exerted by the bat on the ball=[tex]\frac{-6.75}{2\times 10^{-3}}[/tex] N

Average force exerted by the bat on the ball=[tex]3375N[/tex]

Answer:

-387883.3 m/s²

0.000286168546055 seconds

Explanation:

t = Time taken

u = Initial velocity = 370 m/s

v = Final velocity = 259 m/s

s = Displacement = 9 cm

a = Acceleration

[tex]v^2-u^2=2as\\\Rightarrow a=\dfrac{v^2-u^2}{2s}\\\Rightarrow a=\dfrac{259^2-370^2}{2\times 9\times 10^{-2}}\\\Rightarrow a=-387883.3\ m/s^2[/tex]

The acceleration of the bullet is -387883.3 m/s²

[tex]v=u+at\\\Rightarrow t=\dfrac{v-u}{a}\\\Rightarrow t=\dfrac{259-370}{-387883.3}\\\Rightarrow t=0.000286168546055\ s[/tex]

The time taken is 0.000286168546055 seconds

Final answer:

The acceleration of the bullet is approximately -111 m/s^2 and the total time the bullet is in contact with the board is approximately 0.00081 seconds.

Explanation:

The acceleration of the bullet can be calculated using the equation of motion:

a = (v - u) / t

where a is the acceleration, v is the final velocity, u is the initial velocity, and t is the time. In this case, the initial velocity of the bullet is 370 m/s (positive because it is in the direction of motion) and the final velocity is 259 m/s (positive because it is also in the direction of motion). The time it takes for the bullet to decelerate can be calculated using the equation:

x = ut + (1/2)at^2

where x is the displacement, u is the initial velocity, t is the time, and a is the acceleration. In this case, the displacement is the thickness of the wooden board, which is 9.0 cm (or 0.09 m). Rearranging the equation, we get:

t = (v - u) / a

Substituting the values, we have:

t = (259 - 370) / a

Combining the equations for time and acceleration, we get:

t = (0.09) / (370 - 259) = (0.09) / (111) = 0.00081 seconds.

So, the acceleration of the bullet is approximately -111 m/s^2 (negative because it is in the opposite direction of the bullet's motion) and the total time the bullet is in contact with the board is approximately 0.00081 seconds.

Answer:

c. about 1/10 as great.

Explanation:

While jumping form a certain height when we bend our knees upon reaching  the ground such that the time taken to come to complete rest is increased by 10 times then the impact force gets reduced to one-tenth of the initial value when we would not do so.

This is in accordance with the Newton's second law of motion which states that the rate of change in velocity is directly proportional to the force applied on the body.

Mathematically:

[tex]F\propto\frac{d}{dt} (p)[/tex]

[tex]\Rightarrow F=\frac{d}{dt} (m.v)[/tex]

since mass is constant

[tex]F=m\frac{d}{dt}v[/tex]

when [tex]dt=10t[/tex]

then,

[tex]F'=m.\frac{v}{10\times t}[/tex]

[tex]F'=\frac{1}{10} \times \frac{m.v}{t}[/tex]

[tex]F'=\frac{F}{10}[/tex] the body will experience the tenth part of the maximum force.

where:

[tex]\frac{d}{dt} =[/tex] represents the rate of change in dependent quantity with respect to time

[tex]p=[/tex] momentum

[tex]m=[/tex] mass of the person jumping

[tex]v=[/tex] velocity of the body while hitting the ground.

Answer:

after the sun sets or just as it is setting

Explanation:

a crescent moon is thin and reflects less sunlight during the daylight sky so it becomes difficult to spot, but can be spotted when the sun is setting or just sets.

The best time to find the thinnest crescent moon just after the new moon is in the early evening, just after sunset, when the moon starts to reflect sunlight towards the earth, showing the crescent shape. The appearance of the Moon's surface can vary significantly with its phase and this can be better viewed through binoculars.

To find the thinnest crescent moon just after new moon, the best time to look is usually in the early evening just after sunset. The Moon, moving eastward each day in its 30 days cycle around the Earth, moves roughly 12° in the sky each day. A day or two after the new phase, the thin crescent first appears, as we begin to see a small part of the Moon's illuminated hemisphere reflecting a little sunlight toward us.

Because the Moon is moving eastward away from the Sun, it rises later and later each day. Therefore, after a new moon, the thin crescent will be seen in the west just after sunset.

Keep in mind that the bright crescent increases in size on successive days as the Moon moves farther and farther around the sky away from the direction of the Sun.

Bear in mind that the brighter the Moon is in the night sky, the harder it is to see the faint flashes of meteors. Furthermore, as seen through a good pair of binoculars, the appearance of the Moon's surface changes dramatically with its phase, revealing more topographic details when sunlight streams in from the side, causing topographic features to cast sharp shadows.

Learn more about Moon phase viewing here:

https://brainly.com/question/31930734

#SPJ3

Answer:

Explanation:

Given

Speed of ball [tex]u=3.2\ m/s[/tex]

Plane is inclined at an angle [tex]20^{\circ}[/tex]

To win the Game we need to hit the target at [tex]x=2.4\ m[/tex] away

Launch angle of ball [tex]\theta [/tex]

Motion of ball can be considered in two planes i.e. Vertical to the plane and horizontal to the plane

So Net acceleration in vertical plane is [tex]g\sin 20[/tex]

Range of Projectile is given by

[tex]R=\frac{u^2\sin 2\theta }{g}[/tex]

for [tex]R=2.4\ m[/tex]

[tex]2.4=\frac{3.2^2\times sin 2\theta }{g\sin 20}[/tex]

[tex]\sin 2\theta =\frac{2.4\times 9.8\times \sin 20}{3.2^2}[/tex]

[tex]\sin 2\theta =0.7855[/tex]

[tex]2\theta =51.77[/tex]

[tex]\theta =25.88^{\circ}[/tex]

so ball must be launched at an angle of [tex]25.88^{\circ}[/tex]

To answer this, we use projectile motion principles with an equation specifically structured for the problem. Inserting the given values into the equation derived from the horizontal and vertical equations of motion, we can find the required launching angle to hit the target.

To solve this problem, we can apply the concepts found in projectile motion physics. Given the initial speed or velocity (3.2 m/s) and the horizontal distance of the target (2.4 m) we can find the necessary angle (theta) to hit the target. The angle θ can be given by the equation of motion for a projectile which can be derived from the horizontal and vertical equations of motion, θ = atan[(vf² ± sqrt(vf⁴ - g*(g*x² + 2*y*vf²)) / (g*x)] where g = 9.8 m/s² is the acceleration due to gravity, x = 2.4 m is the horizontal distance, y = 0 (height difference), and vf = 3.2 m/s is the final velocity, the speed at which the ball is launched.

https://brainly.com/question/20627626

#SPJ3

Answer:

Hydrogen peroxides are known to be an active ingredient in hair dyes. Hydrogen peroxide is a damaging chemical although it has been added in diluted amounts in hair dyes. Some hair dye companies have already started looking for alternatives for hydrogen peroxide to use in their products, concerning the damaging effects of the chemical.

Hydrogen peroxide can cause hair loss, dermatitis and scalp burns.

Concerning the harmful chemicals in dyes, many people consider it is best to use henna if you really want a colour change for your hair.

Answer:

Explanation:

The electric flux through a Gaussian surface can be calculated using Gauss's law. (a) Calculate electric flux for q1 and q2, (b) Calculate electric flux for q2 and q3, (c) Calculate electric flux for all three charges.

The electric flux through a Gaussian surface can be calculated using Gauss's law. Gauss's law states that the total electric flux through a closed surface is equal to the net charge enclosed by that surface divided by the permittivity of free space.

(a) To find the electric flux through the Gaussian surface enclosing only charges q1 and q2, we need to calculate the net charge enclosed by the surface, which is the sum of the two charges. Then, we divide this sum by the permittivity of free space to obtain the electric flux.

(b) Following the same procedure, we can find the electric flux through the Gaussian surface enclosing only charges q2 and q3.

(c) To find the electric flux through the Gaussian surface enclosing all three charges, we calculate the net charge enclosed by the surface, which is the sum of all three charges. Again, we divide this sum by the permittivity of free space to obtain the electric flux.

https://brainly.com/question/32826728

#SPJ3

Answer:985.71 Hz

Explanation:

Given

Speed of ambulance (source) [tex]v_s=108\ kmph\approx 30\ m/s[/tex]

Original Frequency of sound wave [tex]f=900\ Hz[/tex]

speed of sound waves [tex]v=345\ m/s[/tex]

According to Doppler apparent frequency will be different to original frequency when speed of source is moving w.r.t to observer.

[tex]f'=f(\frac{v+v_o}{v-v_s})[/tex]

where f'=apparent frequency

f=original frequency

[tex]v_o[/tex]=observer speed

[tex]f'=900\times (\frac{345+0}{345-30})[/tex]

[tex]f'=900\times (\frac{345}{315})[/tex]

[tex]f'=985.71\ Hz[/tex]        

Final answer:

The tension in the pendulum at the lowest point is 12.1 N. Without additional information, we cannot determine the exact angle at which the pendulum reaches its highest point. The tension in the pendulum at the highest point is 4.9 N.

Explanation:

Tension in the Pendulum Cable

To determine the tension in the pendulum cable at the lowest point, we can use the formula for circular motion.

T = mg + m(v^2/r)

Where:

g is the acceleration due to gravity (9.8 m/s²)

r is the length of the pendulum

Substituting the values given, we have:

T = 0.500 kg * 9.8 m/s² + 0.500 kg * (3.40 m/s)^2 / 0.80 m

Now, we can calculate the tension:

T = 4.9 N + 7.225 N

T ≈ 12.1 N

The Angle at the Highest Point

To find the angle at the highest point, we use the principle of conservation of energy. The kinetic energy at the lowest point equals potential energy at the highest point.

mgh = 1/2 mv^2

Solving for h gives us h = v^2/(2g), and then use trigonometry to find the angle θ.

h = r(1 - cosθ)

Without sufficient information to calculate the speed of the pendulum, we must leave the answer as an open calculation.

Tension at the Highest Point

At the highest point, the tension is equal to the weight of the pendulum alone since it is momentarily at rest, and there is no centripetal force required.

T = mg

Thus, the tension at the highest point will be:

T = 0.500 kg * 9.8 m/s² = 4.9 N.

Answer: THE SAME

Explanation: visible light is an electromagnetic wave, which has the properties of both magnet and electrical. The speed of light in air has Generally been estimated to be

299,792 kilometers per second. For for a distant start moving towards the Earth at a speed one-fourth (1/4th) of 299,792kilometers per second compared to a flashing light from the Earth,the speed of the light from the star is expected to be the same.

Answer:

2.57 m/s

Explanation:

mass of Erica (ME) = 39 kg

velocity of Erica (VE) = 0 m/s (since she is at her high point of her jump, her velocity will be 0)

mass of Danny (MD) = 45 kg

velocity of Danny (VD) = 4.8 m/s

from the conservation of momentum total initial momentum is equal to the total final momentum

total initial momentum = final initial momentum

(ME)(VE) + (MD)(VD) = (ME + MD) V

where "V" is the velocity of Erica and Danny after Danny grabs her.

(39 x 0) + (45 x 4.8) = (39 + 45) x V

0 + 216 = 84 V

V = 216 / 84 = 2.57 m/s

The speed just after Danny grabs Erica is equal to 2.57 m/s.

Given the following data:

To determine their speed just after Danny grabs Erica, we would apply the law of conservation of momentum:

[tex]M_EV_E + M_DV_D = (M_E + M_D)V_{f}[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]39 \times 0 + 45 \times 4.8 = (39 +45)V_f\\\\0+216=84V_f\\\\V_f = \frac{216}{84} \\\\V_f = 2.57 \;m/s[/tex]

Final speed = 2.57 m/s

Read more: https://brainly.com/question/22599382

Answer:

d. This statement is false. She and the Space Station share the same orbit and will stay together unless they are pushed apart.

Explanation:

In astronomy, orbit is simply a path of an object around another object in a space. That is, orbit is a path of a body that revolves around a gravitating center of mass. Examples of an orbit is are satellite around a planet, orbit around a center of galaxy, planet around the sun, and among others.

On the other hand, space station refers to a spacecraft that can support a group of human for long time in the orbit. Another names for space stations are orbital space station and orbital station.

Therefore, an astronaut goes on a space walk outside the Space Station shares the same orbit with the space station and they will stay together unless they are pushed apart.

The statement is true that an astronaut would float away during a spacewalk if not tethered. The astronaut and ISS, although influencing each other gravitationally to a small extent, they would continue along their separate paths under the influence of Earth's gravity and microgravity.

This statement is true. When an astronaut steps out for a spacewalk, she and the International Space Station (ISS) are both in orbit around Earth but the astronaut will not stay in place relative to the ISS without a tether holding her to the station.

The reason for this is due to microgravity and the properties of motion in space. The astronaut and the ISS are both in free-fall around the Earth, so in the absence of other forces, they would continue along their separate paths. Without a tether, even a small force (like the push off the astronaut does to get away from the airlock) can cause her to drift away from the station.

While the ISS and the astronaut do influence each other gravitationally, this effect is extremely small compared to the force of Earth's gravity. So, without a tether, the astronaut can float away from the ISS.

https://brainly.com/question/27035713

#SPJ3

Answer:

What is the coefficient of kinetic friction = 0.432

Explanation:

The detailed steps and derivation with appropriate substitution is as shown in the attached file.

This question involves the concepts of the law of conservation of energy and frictional energy.

a) The speed of the child when he reaches the bottom of the slide is "6 m/s".

b) The coefficient of kinetic friction between the child and slide when the wax paper isn't used is "0.432".

a)

According to the law of conservation of energy in this situation:

Loss in Potential Energy = Gain in Kinetic Energy

[tex]mgh = \frac{1}{2}mv^2\\\\2gh=v^2\\v=\sqrt{2gh}\\\\[/tex]

where,

v = velocity = ?

g = acceleration due to gravity = 9.81 m/s²

h = height lost = 6 ft = 1.83 m

Therefore,

[tex]v=\sqrt{2(9.81\ m/s^2)(1.83\ m)}[/tex]

v = 6 m/s

b)

Now, the velocity becomes half and the friction comes into action. So in this case the law of conservation of energy will be written as:

Loss of Potential Energy = Gain of Kinetic Energy + Frictional Energy

[tex]mgh=\frac{1}{2}m(\frac{v}{2})^2+\mu_kRl\\\\mgh=\frac{1}{2}m(\frac{v}{2})^2+\mu_kmgCos\theta l\\\\gh-\frac{1}{2}(\frac{v}{2})^2+\mu_kgCos\theta l[/tex]

where,

l = length of slide = [tex]\frac{h}{sin\theta}=\frac{1.83\ m}{sin30^o}=3.66\ m[/tex]

[tex]\mu_k[/tex] = coefficient of kinetic friction = ?

Therefore,

[tex](9.81\ m/s^2)(1.83\ m)-\frac{1}{2}(\frac{6\ m/s}{2})^2=\mu_k(9.81\ m/s^2)(Cos30^o)(3.66\ m)\\\\\mu_k=\frac{13.45\ m^2/s^2}{31.09\ m^2/s^2}\\\\\mu_k=0.432[/tex]

Learn more about the law of conservation of energy here:

brainly.com/question/20971995?referrer=searchResults

The attached picture explains the law of conservation of energy.

Answer:

A) An interference pattern

Explanation:

the two slit experiment is key to understand the microscopic world. The wave-like properties of light were demonstrated by the famous experiment first performed by Thomas Young in the early nineteenth century. In original experiment, a point source of light illuminates two narrow adjacent slits in a screen, and the image of the light that passes through the slits is observed on a second screen.

Key Points

Answer:

5398.4km/h

Explanation:

IN THIS CASE THE MOMENTUM IS CONSERVED. THE VALUE OF MOMENTUM OF ONE COMBINED ROCKET WILL BE SAME AS OF TWO COMBINED.

Let mass of module be m

then

mass of motor  = 4m  (four times the mass of rocket module)

total mass = m + 4m = 5m

combined velocity = V = 5320kph

Let

absolute (relative to earth)motor velocity after disengagement = v

then

rocket module velocity (relative to earth) after disengagement = v+98  (relative velocity = 98)

momentum conservation equation

combined momentum = module momentum + motor momentum

(m+4m)V = m(v+98) + 4m*v

5mV = 98m+mv + 4mv

5V = 98+v + 4v (m cancels out)

5V - 98 = 5v

((5*5320)-98)/5 = v

v = 5300.4 km/h

velocity of rocket module relative to earth = v +98

                                                                       = 5300.4 + 98

                                                                       = 5398.4km/h  

Answer : The energy consumed by bulb in 24 hours is, 8.64 × 10⁶ J

Explanation :

As we are given that:

1 watt = 1 J/s

So,

100 watt = 100 J/s

Now we have to calculate the energy consumed by bulb in 24 hours.

As we know that:

1 hr = 60 min

1 min= 60 sec

So,

24 hr = 24 × 60 × 60 sec = 86400 sec

As, the energy consumed by bulb in 1 second = 100 J

So, the energy consumed by bulb in 86400 second = 86400 × 100 J

                                                                                       = 8.64 × 10⁶ J

Thus, the energy consumed by bulb in 24 hours is, 8.64 × 10⁶ J

To calculate the energy consumed by a 100-watt electric incandescent light bulb in 24 hours, we use the formula E = Pt, where E is the energy in joules (J), P is the power in watts (W), and t is the time in seconds (s). In this case, the energy consumed is 8640000 J.

To calculate the electrical energy used by a 100-watt electric incandescent light bulb in 24 hours, we can use the formula E = Pt, where E is the energy in joules (J), P is the power in watts (W), and t is the time in seconds (s).

First, we need to convert the time from hours to seconds. There are 3600 seconds in an hour. So, 24 hours is equal to 24 x 3600 = 86400 seconds.

Now, we can substitute the values into the formula. E = 100W x 86400s = 8640000 J.

https://brainly.com/question/34856812

#SPJ3

Answer:

about 10 trillion kilometers

Explanation:

c = Speed of light = [tex]3\times 10^8\ m/s[/tex]

t = Seconds in one year = [tex]365.25\times 24\times 60\times 60[/tex]

1 Light year

[tex]1\ ly=ct\\\Rightarrow 1\ ly=3\times 10^8\times 365.25\times 24\times 60\times 60=9.46728\times 10^{15}\ m\\ =9.46728\times 10^{15}\times 10^{-3}\\ =9.46728\times 10^{12}\ km\approx 10\ trillion\ km[/tex]

The answer is a. about 10 trillion kilometers

Answer:

Distance = 26.0m Displacement = 4.0m

Explanation:

Distance specifies only how far an object has traveled while displacement is the distance traveled in a specified direction.

Total distance traveled by the object will be distance travelled through north + distance travelled through south i.e 15.0m + 11.0m = 26.0m

Displacement is gotten by using the Pythagoras theorem. Since the object traveled in the same vertical direction (15.0m through north which is upward i.e positive y direction and 11.0m through south i.e in the negative y direction), the displacement will be 15.0m - 11.0m = 4.0m

The distance traveled is 26.0 m and the magnitude of the displacement vector is 4.0 m

First, we will define the terms distance and displacement

Distance is the total movement of an object without any regard to direction.

Displacement is the difference between the original and final position of a path taken by an object.

Since, the object moves 15.0 m north and then 11.0 m south,

Then,

Distance traveled = 15.0 m + 11.0 m

Distance traveled = 26.0 m

For the magnitude of the displacement,

The object moves 15.0 m north and then 11.0 m south, which is in the opposite (negative) direction

Then,

Magnitude of displacement = 15.0 m - 11.0 m

Magnitude of displacement = 4.0 m

Hence, the distance traveled is 26.0 m and the magnitude of the displacement vector is 4.0 m

Learn more of distance and displacement here: https://brainly.com/question/13065180