A region of space in which a measurable gravitational force is indicated by the force exerted on a test mass is called

Answers

Answer 1

Answer:

Gravitational field

Explanation:

An object of mass M exerts a force (gravitational force) of attraction on any other object of mass m. The magnitude of this force is

[tex]F=G\frac{Mm}{r^2}[/tex]

where G is the gravitational constant and r the separation between the two objects.

Since the object of mass M exerts this force on any other object located around it, we can think as a "gravitational field", which is the region of space around the object of mass M that exerts a gravitational force on other object. This way, the force exerted on another object of mass m can be rewritten as

F = mg

where

[tex]g=\frac{GM}{r^2}[/tex]

is called strength of the gravitational field.


Related Questions

a balloon is rising vertically upwards at a velocity of 10m/s. When it is at a height of 45m from the ground, a parachute bails out from it. After 3s he opens his parachute and decelerates ata a constant rate 5m/s.when.
(a) what was the height of the parachutist above the ground when he opened his parachute?
(b)How far is the parachutist from the balloon at t=3s?
(c)With what velocity does the parachutist hit the ground?
(d)After how long does the parachutist hit the ground after his exist from the balloon?

Answers

(a) 30.9 m

Let's analyze the motion of the parachutist. Its vertical position above the ground is given by

[tex]y=h+ut+\frac{1}{2}gt^2[/tex]

where

h = 45 m is the initial height

u = 10 m/s is the initial velocity (upward)

t is the time

g = -9.8 m/s^2 is the acceleration of gravity (downward)

Substituting t=3 s , we find the height of the parachutist when it opens the parachute:

[tex]y=45 m+(10 m/s)(3 s)+\frac{1}{2}(-9.8 m/s^2)(3 s)^2=30.9 m[/tex]

(b) 44.1 m

Here we have to find first the height of the balloon 3 seconds after the parachutist has jumped off from it. The vertical position of the balloon is given by

y = h + ut

where

h = 45 m is the initial height

u = 10 m/s is the initial velocity (upward)

t is the time

Substituting t = 3 s, we find

y = 45 m + (10 m/s)(3 s) = 75 m

So the distance between the balloon and the parachutist after 3 s is

d = 75 m - 30.9 m = 44.1 m

(c) 8.2 m/s downward

The velocity of the parachutist at the moment he opens the parachute is:

v = u +gt

where

u = 10 m/s is the initial velocity (upward)

t is the time

g = -9.8 m/s^2 is the acceleration of gravity (downward)

Substituting t = 3 s,

v = 10 m/s + (-9.8 m/s^2)(3 s)= -19.4 m/s

where the negative sign means it is downward

After t=3 s, the parachutist open the parachute and it starts moving with a deceleration of

a =+5 m/s^2

where we put a positive sign since this time the acceleration is upward.

The total distance he still has to cover till the ground is

d = 30.9 m

So we can find the final velocity by using

[tex]v^2-u^2 = 2ad[/tex]

where this time we have u = 19.4 m/s as initial velocity. Taking the downward direction as positive, the deceleration must be considered as negative:

a = -5 m/s^2

Solving for v,

[tex]v=\sqrt{u^2 +2ad}=\sqrt{(19.4 m/s)^2+2(-5 m/s^2)(30.9 m)}=8.2 m/s[/tex]

(d) 5.24 s

We can find the duration of the second part of the motion of the parachutist (after he has opened the parachute) by using

[tex]a=\frac{v-u}{t}[/tex]

where

a = -5 m/s^2 is the deceleration

v = 8.2 m/s is the final velocity

u = 19.4 m/s is the initial velocity

t is the time

Solving for t, we find

[tex]t=\frac{v-u}{a}=\frac{8.2 m/s-19.4 m/s}{-5 m/s^2}=2.24 s[/tex]

And added to the 3 seconds between the instant of the jump and the moment he opens the parachute, the total time is

t = 3 s + 2.24 s = 5.24 s

Which of the following is another term for a planned economy

Answers

Answer:

Another term for planned economy is a socialist system.

The correct answer would be, Socialist system.

Socialist system is another term for a planned economy.

Explanation:

An economic system, in which the economy(including investment, capital and allocation of capital goods) is governed by a predefined economic and production plans, is called as the Planned Economy.

The system of planning in this economic system can either be centralized, decentralized or participatory.

This economic system is regulated by the Government. All decisions about the capital, lands, buildings, machinery, or other resources are taken by the government.

The production, prices, distribution, etc of the products or services are regulated centrally by the government.

Learn more about Planned Economy at:

brainly.com/question/14703586

#LearnWithBrainly

What is quantum matter

Answers

Answer:

Quantum theory is the theoretical basis of modern physics that explains the nature and behavior of matter and energy on the atomic and subatomic level. The nature and behavior of matter and energy at that level is sometimes referred to as quantum physics and quantum mechanics.

Explanation:

Don't know if this helped at all but I got it from this website:  

https://whatis.techtarget.com/definition/quantum-theory

Answer:

Matter in quantum mechanics is particles and waves.

An idea, event, or object can be represented by a ____ to help people better understand it.

Answers

Answer:

An idea, event, or object can be represented by a 'model' to help people better understand it.

Explanation:

If an idea, event or object is to be represented or introduced to an individual or a group of people, a good idea is to represent it with a model.

The reason behind it being that a model will help the people understand it better as they will be able to see something in front of it and know what is being discussed.

Final answer:

A symbol is used to represent an idea, event, or object, to convey complex ideas and emotions with cultural significance. Symbolism allows for effective communication by providing a shorthand that encapsulates a variety of meanings within recognizable forms.

Explanation:

An idea, event, or object can be represented by a symbol to help people better understand it. Symbolism is the practice of using symbols such as gestures, signs, objects, signals, and words to convey complex ideas and emotions that are recognized shared meanings within a society. For example, the United States' flag might be just a piece of colored cloth, but it can represent a multitude of ideas from freedom and sacrifice to oppression, depending on one's perspective and cultural context.

Creating symbols can be a form of shorthand communication, offering a powerful way to express complex ideas without lengthy explanations. When writing, one might use imagery to evoke a sensory experience of an event or moment, thereby enriching the storytelling with deeper meaning. Symbols thus serve as cultural aggregates which crystallize a variety of emotions and concepts in a universally understandable way.

In some cases, models can serve as symbolic representations, such as equations, physical representations, or computer simulations which abstractly represent aspects of reality to convey understanding to others. Similarly, an analogy can be employed to make complex subjects more relatable by comparing them to familiar experiences or objects, ensuring effective communication with the audience.

Learn more about Symbolism here:

https://brainly.com/question/3200799

#SPJ6

Why does sound travel faster in solids than in liquids, and faster in liquids than in gases?​

Answers

Answer:

Liquids are more dense than gases, but less dense than solids, so sound travels 2nd fast in liquids. Gases are the slowest because they are the least dense.

Explanation: The more dense something is, the faster sound will travel through the matter. I hope this was the answer you was looking for.

Final answer:

Sound travels faster in mediums that are denser and more rigid, with solids being faster than liquids, which in turn are faster than gases. The closer particle arrangement in solids and liquids allows more efficient energy transfer. Temperature and air pressure also influence sound speed, with higher values generally leading to faster sound travel.

Explanation:

The speed of sound is influenced by the medium it travels through due to differences in density and rigidity. In solids, particles are packed together more closely compared to liquids, and in liquids, they are closer than in gases. This proximity allows for quicker transfer of sound energy from particle to particle. Sound waves travel faster in solids than in liquids because solids are more rigid and less compressible, and faster in liquids than in gases for similar reasons. In addition to rigidity and density, temperature also affects the speed of sound. Higher temperatures increase particle movement, thus enhancing sound transmission. The speed of sound is greater at sea level due to higher air pressure, which decreases the compressibility of air and allows sound to travel through it more quickly.

Which of the following is not a double-replacement?
A.) HNO3 (aq) + KHO (aq) -> H2O (l) + KNO3 (aq)
B.) Ba(OH)2 (aq) + 2HClO4 (aq) -> Ba(ClO4)2 (aq) + 2H2O (l)
C.) NaOH (aq) + HCl (aq) -> H2O (aq) + NaCl (s)
D.) Zn (s) + 2HCl (aq) -> H2 (g) + ZnCl2 (s)

Answers

Answer:

The correct answer is option D.

Explanation:

From the given options the reaction which is not a double replacement reaction is:

[tex]Zn (s) + 2HCl (aq)\rightarrow H_2 (g) + ZnCl_2 (s)[/tex]

This because the above reaction is an example of single replacement reaction.

[tex]AB+C\rightarrow AC+B[/tex]

Whereas;

Double replacement reaction is a type of chemical reaction in which exchange of ions among the reactants take place.

[tex]AB+CD\rightarrow AD+CB[/tex]

Answer:

A and B

Explanation:

Carbon tetrachloride (CCl4) is ionic or convalent

Answers

Answer:

Covalent.

Explanation:

In carbon tetrachloride, chlorine and carbon are bounded with each other by single covalent bond. Carbon atom contains eight electrons in outer shell and chlorine atom also have eight electrons, so they are completing their octet by the sharing of electrons with each other.

Covalent bond is forming by the overlap of orbital, in CCl4 overlap is occurred so it is a covalent bounded compound. Formation of Ionic compounds occurs when two opposite charged ions interact with each other by electrostatic interaction such as NaCl, Na having positive and Cl having negative charge.

So, the answer is covalent bond.

Carbon tetrachloride (CCl₄) is a covalent compound. This means that the carbon and chlorine atoms are bonded together by sharing electrons.

What is carbon tetrachloride?

Carbon tetrachloride is a nonpolar molecule, which means that the electrons are evenly distributed around the molecule. This is because the chlorine atoms are all equally electronegative, so they do not attract the electrons more strongly than the carbon atom.

Ionic compounds, on the other hand, are formed when there is a transfer of electrons from one atom to another. This occurs when one atom has a much higher electronegativity than the other atom.

The covalent bonding in carbon tetrachloride makes it a nonpolar molecule. This means that it does not have a permanent electric dipole moment, and it is not attracted to other polar molecules.

Find out more on covalent bond here: https://brainly.com/question/3447218

#SPJ6

What is tan(61)?
А. 1.80
B. 0.49
C. 0.61
D. 0.87

Answers

Answer:

The answer of tan(61) is:

A= 1.80

The part of your brain that controls basic life support function is the ?

Answers

Answer:

Medulla

Explanation:

Medulla is the part of your brain that controls basic life support function.

The  part of your brain that controls basic life support function is the medulla. The medulla sees to the transmission of information from the spinal cord to important parts of the brain.

What is the brain?

The brain is the organ that controls every other organ in the body. It controls the nervous and the endocrine systems.

The  part of your brain that controls basic life support function is the medulla.

Learn more about medulla of the brain:https://brainly.com/question/14015198?

#SPJ2

An electric field from a charge has a magnitude of 1.5 × 104 N/C at a certain location that points inward. If another charge with a magnitude of +3.0 × 10−6 C is brought near it, what is the strength of the electrostatic force that acts on this charge and how do the two charges behave?

Answers

Answer:

-0.045 N, they will attract each other

Explanation:

The strength of the electrostatic force exerted on a charge is given by

[tex]F=qE[/tex]

where

q is the magnitude of the charge

E is the electric field magnitude

In this problem,

[tex]q=3.0\cdot 10^{-6}C[/tex]

[tex]E=-1.5\cdot 10^4 N/C[/tex] (negative because inward)

So the strength of the electrostatic force is

[tex]F=(-3.0\cdot 10^{-6}C)(1.5\cdot 10^4 N/C)=-0.045 N[/tex]

Moreover, the charge will be attracted towards the source of the electric field. In fact, the text says that the electric field points inward: this means that the source charge is negative, so the other charge (which is positive) is attracted towards it.

Answer:

The correct answer is actually -0.045; attract each other

Explanation:

a train moves moves from rest to a speed of 25 m/s in 30.0 sec . what is its acceleration

Answers

a = Delta v/Delta t
Delta v = 25 - 0 = 25
Delta t = 30
25/30 = 5/6 = 1.66 repeating

Acceleration = (change in speed) / (time for the change)

Change in speed = 25 m/s

Time for the change = 30 sec

Acceleration = (25 m/s) / (30 sec)

Acceleration = (25/30) (m/s /s)

Acceleration = 0.833... m/s²

Which quantities are scalars?

Choose all that apply

A.Distance
B.speed
C. acceleration
D.Velocity

Answers

Answer:

A and B

Explanation:

Because both of them have only magnitude not direction.

Answer:

I think it's either A or B. but i'm going to say B.

Explanation:

Hope my answer has helped you if not i'm sorry.

Two identical point charges are 3.00 cm apart. find the charge on each of them if the force or repulsion is 4.00 x 10^-7. (Use Coulomb's constant)

Answers

Answer:

Charge on each is 2 x 10⁻¹⁰.

Explanation:

We know that Force between two point charges is given b the Coulomb's law as:

F = kq₁q₂/r^2

k = 9 x 10^9

r = 3.00 cm

= 0.03 m

q₁ = q₂

F = 4.00 x 10^-7

Rearranging the formula, we get:

F = k q²/r²

q² = Fr²/k

q² = 4 x 10⁻⁷ x 0.03²/(9x10⁹)

q² = 4 x 10⁻²⁰

q = 2 x 10⁻¹⁰

As there is force of repulsion between the charges, the charges must be both positive or both negative.

If a substance absorbs energy but its temperature does not change, then the internal energy is changing.

Answers

If a substance absorbs energy but its temperature does not change, then the internal potential energy is changing.

Answer:

If a substance absorbs energy but its temperature does not change, then the internal potential energy is changing.

Explanation:

I just did this question on the same lesson.

Which of the following correctly describe electric field lines?
Say/check all that apply
A.) They never cross
B.) Field lines that are close together indicate a stronger electric field
C.) They don't affect the charge that created them.
D.) They begin on north poles and end on south poles.

Answers

-- Electric field lines DO never cross.  (A)

-- Electric field lines that are close together DO indicate a stronger electric field. (B)

-- Electric field lines DO not affect the charge that created them.  (C)

-- Electric field lines DON'T begin on north poles and end on south poles.  North and South "poles" are the way we talk about magnets, not electric charges.

Explanation:

The imaginary lines that shows the direction of electric field are called electric field lines. The direction of electric field lines are from positive charge to the negative charge.

Two electric field lines can never ever intersect, if they do so there would be two direction of electric field at that point, which is not possible.

If the electric field lines are very to each other, then it indicates the stronger electric field. The electric field lines is unaffected by the nature of charged particle that created them.

Hence, the correct options are :

(A) They never cross

(B) Field lines that are close together indicate a stronger electric field

(C) They don't affect the charge that created them.

If the mass of a ball B is 1 kilogram and it’s speed is 1 m/sec. the mass and the speed of ball A is three times the mass and speed of ball B. What is the ratio of kinetic energy of ball A to ball B? Hint: dividethe kinetic energy equation for ball A by the kinetic energy equation of ball B.

A.3
B.6
C.9
D.27

Answers

your answer would be 27.

The ratio of kinetic energy of ball A to ball B is 27

Answer: Option D

Explanation:

The kinetic energy of any object is the energy exhibited by the object when it is in motion. The kinetic energy of any object is directly proportional to the mass of the object and square of the speed at which the object is moving. So the kinetic energy of any object can be represented as

                 [tex]E_{k}=\frac{1}{2} \times m \times(\text { speed })^{2}[/tex]

In this case, for ball B the mass is 1 kg and speed is 1 m/s. So the kinetic energy of ball B is

            [tex]\text { Kinetic energy for ball } B=\frac{1}{2} \times 1 \times 1^{2}=0.5 J[/tex]

As it is said that the mass (M) and speed of ball A is three times the mass and speed of ball B.  So ,

         [tex]\text { M of ball } A=3 \times M \text { of ball } B=3 \times 1=3 \mathrm{kg}[/tex]

And,

           [tex]\text { Speed of ball } A=3 \times \text { Speed of ball } B=3 \times 1=3 \mathrm{m} / \mathrm{s}[/tex]

Thus, the kinetic energy of ball A will be

            [tex]\text {Kinetic energy for ball } A=\frac{1}{2} \times 3 \times 9=13.5 \mathrm{J}[/tex]

Now, to determine the ratio of kinetic energy of ball A to ball B,

[tex]\text { Ratio of kinetic energy }=\frac{\text {Kinetic energy of Ball } A}{\text {Kinetic energy of Ball } B}=\frac{13.5}{0.5} = 27[/tex]

Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?

Answers

Final answer:

To calculate the total force required for lifting a box vertically, consider the weight of the box and the force applied by the person. Add these two forces together, making sure the directions are opposite.

Explanation:

In order to calculate the total force required for lifting a box vertically, you need to consider two main forces:

The weight of the box: This force is equal to the product of the mass of the box and the acceleration due to gravity. It acts vertically downwards.The force applied by the person: This force is exerted in the opposite direction to the weight of the box and is necessary to lift the box.

The total force required can be calculated by adding the weight of the box and the force applied by the person. It is important to note that the direction of the force applied by the person should be opposite to the direction of the weight of the box.

When a virus enters a living cell, the virus
a. eats the cell
b. makes the cell produce more cells
c. dies
d. causes the cell to make more viruses

Answers

Answer:

d. causes the cell to make more viruses

Explanation:

Viruses depend on the host cells that they infect to reproduce. When found outside of host cells, viruses exist as a protein coat or capsid, sometimes enclosed within a membrane. The capsid encloses either DNA or RNA which codes for the virus elements.

10. A person with a mass of 15 kg is walking uphill at a velocity of 2 m/s. What is the walker's momentum?

A. 15 kg-m/s
B. 30 kg-m/s
C. 10 kg-m/s
D. 13 kg-m/s

16. Two bouncy balls colliding with each other is an example of what type of collision?

A. Inelastic collision
B. Elastic collision
C. Parallel collision
D. Mass collision

20
Which of the following is considered to be a vector?

A. Temperature
B. Mass
C. Velocity
D. Time

Answers

Answer:

10. B. 30 kg.m/s

16. B. Elastic collision

20. Velocity

Explanation:

10. Momentum is simply the product of mass and velocity of an object. So it can be soved with the equation:

p = mv

Where:

p = momentum (kg.m/s)

m = mass (kg)

v = velocity (m/s)

Your problem gives you the following:

m = 15 kg

v = 2 m/s

p =?

So just fill in what you know:

p = mv

p = (15kg)(2m/s) = 30 kg.m/s

16. Elastic collision occurs when two objects collide and no loss in energy occurs after collision. Supposing that the balls are very bouncy, let's say they bumped into each other and they bounce-off of each other. If there is no loss in speed on both ends, that means that this is an elastic collision.

20. To differentiate vector and scalar quantity, just remember that vectors have direction. Both quanitites show magnitude, but vector quantities indicate the direction the magnitude is going. Among all the choices, it is only velocity that is considered as a VECTOR quantity.

1. Using the data from M7:
Which four countries are the worst in releasing CO2?​

Answers

Answer:

China, US, India, and Russia

Answer this question, please. ______ interference occurs when two waves are in phase.

Answers

Answer:

constructive interference

Explanation:

waves come together so that they are in phase with each other

at what point the certain object feels zero garvitational force between earth and the moon. take the required information from the book.
Required: distance away from earth or moon​

Answers

Answer:

Newton gives us force

F=-G*M*m/R^2

Divide by the mass of the object to get acceleration

a=F/m = GM/R^2

You are solving the distance where the force from the moon equals the force from the Earth -

a= G*(mass of earth)/R^2 - G*(mass of moon)/(384400000-R)^2=0

Or in other words

G*(mass of earth)/R^2=G*(mass of moon)/(384400000-R)^2

Divide by G*(mass of the moon) and multiply by R^2 to get terms on both sides

G*(mass of earth)/(G*(mass of moon))=R^2/(384400000-R)^2

Since the mass of the moon and earth are fixed, the left side is a number

81.3 = R^2/(384400000-R)^2 → R^2/(384400000-R)^2–81.3 = 0

simplify

R/(384400000-R) = 9.01665

R=346024000 = 346,024 km.

Explanation:

A bowling ball rolls 32 meters in 0.8 seconds what is the average speed in m/s of the bowling ball in m/s

Answers

Average speed = (distance rolled) / (time to roll the distance)

Average speed = (32 meters) / (0.8 sec)

Average speed = (32/0.8) (meters/sec)

Average speed = 40 m/s .

I don't know.  That's just a hair under 90 miles per hour.  Is this reasonable for a bowling ball ?  Does anybody roll a bowling ball as fast as a major league pitcher pitches a hardball ? ?

What is the volume of 2400kg of gasoline (petrol) if the density of petrol is 0.7g/km3

Answers

Final answer:

To find the volume of 2400kg of gasoline with a density of 0.7g/cm³, convert the mass to grams and then divide by the density, yielding a volume of 3,428,571.43 cm³ or 3428.571 L.

Explanation:

The question asks for the volume of 2400kg of gasoline, given the density of petrol is 0.7g/cm³ (not g/km³ as mentioned in the question, which seems to be a typo). To calculate the volume, use the formula Volume = Mass / Density. First, convert the mass of gasoline from kilograms to grams (since the density is given in grams per cubic centimeter), which is 2400kg * 1000g/kg = 2,400,000g. Then, divide this by the density of petrol to find the volume. Hence, Volume = 2,400,000g / 0.7g/cm³ = 3,428,571.43 cm³ or 3428.571 L (since 1,000 cm³ is equivalent to 1 L).

What do elements in a family tend to share.
A.) similar periods
B.) similar groups
C.) similar atomic symbols
D.) similar chemical properties and characteristics

Answers

Answer:

its D

Explanation:

because they share similar amounts of electrons in their outer shell. and characteristics is a learned trait which makes sense if we live with our family we would most likely act like them.

Answer: D

Explanation:

Just got it right on the quiz

A ball is dropped from a height of 20 meters. At what height does the ball have a velocity of 10 meters/second?
A.5.1 meters
B.9.8 meters
C.25 meters
D.15 meters

Answers

Answer:B

Explanation:

Initial velocity, u=0m/s

Distance,s=20m

a=+g=9.8m/s*s

Using v*v=u*u+2gs

v*v=0+2*9.8*20

v*v=392

v=19.8

When s=20m, v = 19.8m/s

Therefore when v = 10m/s, s= 10*20/19.8

s =10.1m

Answer:

I believe that its D. 15 Meters

Explanation:

Which statements describe how a machine can help make work easier? Check all that apply.

It can put out more force than the input force by decreasing the distance through which force is applied.

It can increase the amount of work performed if the output force is in the same direction as the input force.

It can apply a force to an object in a different direction than the force applied to the machine.

It can increase the distance through which a force acts by exerting less force than was used on it.

It can exert a greater force through a greater distance than the force used on the machine.

Answers

Answer:

It can exert a greater force through a greater distance than the force used on the machine.

Explanation:

A machine is a device that makes work easier and so it should exert greater force than the force applied on it.

Answer:

she is correct

If you imagine how to walk from your house to the bus stop, you are using a:​

Answers

Answer:

Mental map

Explanation:

A mental map is a person's point-of-view perception of their area of interaction.

This is a short answer, but I Hope this helps!

- Kylie

Answer:

Mental map is the correct answer.

Explanation:

If you imagine how to walk from your house to the bus stop, you are using a:​ Mental map.

What is the efficacy of a 60.0 W incandescent lightbulb that produces 830 lumens?

Answers

η = 13.8 lm/W. The luminous efficacy of a incandescent lightbulb that produces 830 lumens and consumed a power of 60 W is 13.8 lm/W.

The luminous efficacy of a light source is the relationship between the luminous flux (in lumens) emitted by a light source and the power (in watts). The luminous efficacy of a light source or luminous efficiency measures the part of electrical energy that is used to illuminate and is obtained by dividing the luminous flux emitted by the electrical power consumed. Luminous efficiency is expressed in lumens per watt (lm / W). It is given by the relation:

η = F / P.  Where F is the luminous flux, and P is the power consumed by the light source.

The efficacy of a 60.0 W incandescent lightbulb that produces 830 lm is:

η = 830 lm / 60 W

η = 13.8 lm/W

Which of the following are found in plant cells buh not animal cells?

Answers

the mitochondria are found in plant cells and not animal cells
Other Questions
Sound is a disturbance that travels through a medium as a Which of the following statements is true of the methods for allocating joint costs? The sales value at splitoff method allocates joint costs to each product in proportion to the sales value of total production. The sales value at splitoff method always results in the same gross-margin percentage for all products. The net realizable value method uses the sales value of the units sold during the accounting period to allocate joint costs. The net realizable value method results in the same joint production cost per unit for all products. how many nickels does it take to make $4.85 evelyn eyed her new conquest thoughtfully. her face remained a mask of playful intrigue, but behind it she was envisioning his defeat. she could see herself, like she had done so many times before, luring him closer. building his dependency. and then manipulating him to carry out her plans. plans that would surely destroy him, but which would make her stronger. which characteristic of gothic writing does this passage best illustrate? Which cell lacks a nucleus Select the correct answer. A leading food manufacturing company wants to increase its market share by targeting health conscious people. Its aims to do so by improving the nutritional value of the food manufactured and then promoting it based on its high nutrition value. Which food processing technique should the company use to increase the nutritional value of the food? A. use mechanically harvested crops B. use refrigerated containers C. use mechanized packaging D. use fortified foods Which of the following is an environmental cost of agriculture?A. AgronomyB. Cash cropsC. PollutionD. Crop rotation Consider the equation below. f(x) = 2x^3 + 3x^2 12x (a) Find the interval on which f is increasing. (Enter your answer in interval notation.) Find the interval on which f is decreasing. (Enter your answer in interval notation.) (b) Find the local minimum and maximum values of f. local minimum local maximum (c) Find the inflection point. (x, y) = Find the interval on which f is concave up. (Enter your answer in interval notation.) Find the interval on which f is concave down. (Enter your answer in interval notation.) The product of three consecutive numbers is 990. What is the sum you f the 3 whole numbers? WHO WANTS FREE POINTS + BRAINLIEST? answer this question correctly and you shall receive If you're caught driving with _____, you could be punished with up to a year in jail and be fined up to $1,000.A. a suspended driver license or license plateB. an intoxicated minor passengerC. headphones covering both earsD. a broken taillight or headlight which of these sentences has correct parallel structure 1. Erica likes swimming, baking, and to read.2. Erica likes to play tennis, hike, and to play guitar.3. Erica likes jogging, hiking, and reading.4. Erica likes to sing, to dance, and play the guitar. which of the following phrases can be used to describe the genotype Ee There are 1,379 souvenir paperweights that need to be packed in boxes. Each box will hold 15 paperweights. How many boxes will be needed? A. The probability that a product is defective is 0.1. What is the probability that there will be 1 or less defective products out of the next 8 produced products B.The expected number of imperfections in the coating nylon for parachutes is 6 per 100 yards. What is the probability of finding 12 or fewer imperfections in 260 yardsC.In a lot of 54 products there are 9 defective products. Calculate the probability that not more than 1 is defective from a random sample of 17 products. In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, youll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:N2 + 3H2 2NH3 + energyHow can you change the chemical equilibrium to benefit the company? What benefits will be realized? 6. Simplify:(1) (37 - (-8)]+[11 - (-30)]Plz answer Which cause-and-effect diagram best illustrates one main effect of informedcitizens on the political system? What region is the main control center for autonomic functionsa. Thalamusb. Hypothalamusc. Epithalamusd. Ponse. Medulla oblongata The US labor movement began in the _____. A. 1930s B. 1920s C. 1880s D. 1860s Please select the best answer from the choices provided. A B C D what must happen before meiosis can begin